This Technical Reference Manual (TRM) in any form, software or printed matter, contains proprietary information of Oracle ; it is provided under an Oracle agreement containing restrictions on use and disclosure and is also protected by copyright, patent, and other intellectual property law. Restrictions applicable to this TRM include, but are not limited to: (a) exercising either the same degree of care to safeguard the confidentiality of this TRM as you exercise to safeguard the confidentiality of your own most important Confidential Information or a reasonable degree of care, whichever is greater; (b) maintaining agreements with your employees and agents that protect the Confidential Information of third parties such as Oracle and instructing such employees and agents of these requirements for this TRM; (c) restricting disclosure of this TRM to those of your employees who have a 'need to know' consistent with the purposes for which this TRM was disclosed to you; (d) maintaining this TRM at all times on your premises; (e) not removing or destroying any proprietary or confidential legends or markings placed upon this TRM in whatever form, software or printed matter; and (f) not reproducing or transmitting this TRM in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Oracle. You should not use this TRM in any form, software or printed matter, to create software that performs the same or similar functions as any Oracle products.
The information in this TRM is subject to change without notice. If you find any problems in the TRM in any form, software or printed matter, please report them to us in writing. Oracle does not warrant that this TRM is error free. This TRM is provided to customer 'as is' with no warranty of any kind. This TRM does not constitute Documentation as that term is defined in Oracle's agreements. Reverse engineering of the Programs (software and documentation) associated with this TRM are prohibited. The Programs associated with this TRM are not intended for use in any nuclear, aviation, mass transit, medical, or other inherently dangerous applications. It shall be licensee's responsibility to take all appropriate fail safe, backup, redundancy and other measures to ensure the safe use of such applications if the Programs are used for such purposes, and Oracle disclaims liability for any damages caused by such use of the Programs. Program Documentation is licensed for use solely to support the deployment of the Programs and not for any other any other purpose. Restricted Rights Legend
This TRM and the Programs associated with this TRM delivered subject to the DOD FAR Supplement are 'commercial computer software' and use, duplication and disclosure of the TRM and the Programs associated with this TRM shall be subject to the licensing restrictions set forth in the applicable Oracle license agreement. Otherwise, this TRM and the Programs associated with this TRM delivered subject to the Federal Acquisition Regulations are 'restricted computer software' and use, duplication and disclosure of the TRM and the Programs associated with this TRM shall be subject to the restrictions in FAR 52.227-14, Rights in Data General, including Alternate III (June 1987). Oracle, 500 Oracle Parkway, Redwood City, CA 94065.
Oracle is a registered trademark. AIM Advantage™, Big Business. Small Business. All Business.™, CDM Advantage™, .comference™, ConText®, Des40®, Easy*Query™, Easy*SQL®, Education Objects™, EMM Advantage™, Enabling the Information Age®, ExpertDetectSM, Express®, FastForwardSM, GEMMS®, Gist™, Hyper*SQL™, instantOracle™, "Internet Business Intelligence - Insight for Everyone"™, iSQL*Plus™, JInitiator™, NLS*Workbench®, Object Marketplace™, ODP Pulse™, ODP Techwire™, OLA™, On Oracle™, Oracle®, Oracle Book®, Oracle Bookbatch®, Oracle BookBuilder®, OracleBRONZE®, Oracle Business OnLine®, OracleDevConnectSM, Oracle® Discoverer™, Oracle® Expert™, Oracle Financials®, OracleGOLDSM, OracleIncidentSM, OracleJSP™, OracleLifeCycleSM, Oracle Media Objects®, OracleMERCURYSM, OracleMetaLinkSM, OraclemetalsSM, OracleMobile™, Oracle Names®, Oracle NetSolutions®, Oracle® One™, Oracle Open Gateways®, Oracle OpenWorld®, OraclePLATINUMSM, Oracle Power Objects®, Oracle Press®, Oracle Procedural Gateway®, Oracle Quality®, Oracle Secure Network Services®, OracleSILVERSM, Oracle® SQL/Services™, Oracle® SQL*TutorSM, OracleSTERLINGSM, Oracle Store®, Oracle Transparent Gateway®, OracleWare®, Oracle8i™, Oracle9i™, PC Express®, Personal Express®, PJM Advantage™, PL/SQL™, Pro*Ada®, Pro*C™, Pro*C/C++™, Pro*COBOL®, Pro*FORTRAN®, Pro*Pascal®, Pro*PL/1®, Pro*REXX®, Profit™, ProREXX™, Report Card™, Secure Access 2.0™, Secure Network Services®, Security Without Compromise™, SellingPoint®, SQL*Plus®, Tutor™ are trademarks or registered trademarks of Oracle. Other names may be trademarks of their respective owners. The absence of a product or service name, slogan, or logo from this list does not constitute a waiver of Oracle's trademark or other intellectual property rights concerning that name, slogan, or logo.
| Description: | Alternate designators |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_ALTERNATE_DESIGNATORS.ORGANIZATION_ID | MTL_PARAMETERS |
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_ALTERNATE_DESIGNATORS_TL.ALTERNATE_DESIGNATOR_CODE
BOM_ALTERNATE_DESIGNATORS_TL.ORGANIZATION_ID |
BOM_ALTERNATE_DESIGNATORS |
|
BOM_BILL_OF_MATERIALS.ALTERNATE_BOM_DESIGNATOR
BOM_BILL_OF_MATERIALS.ORGANIZATION_ID |
BOM_ALTERNATE_DESIGNATORS |
|
BOM_OPERATIONAL_ROUTINGS.ALTERNATE_ROUTING_DESIGNATOR
BOM_OPERATIONAL_ROUTINGS.ORGANIZATION_ID |
BOM_ALTERNATE_DESIGNATORS |
|
BOM_STRUCTURES_B.ALTERNATE_BOM_DESIGNATOR
BOM_STRUCTURES_B.ORGANIZATION_ID |
BOM_ALTERNATE_DESIGNATORS |
|
FLM_SEQ_TASK_DEMANDS.ALTERNATE_ROUTING_DESIGNATOR
FLM_SEQ_TASK_DEMANDS.ORGANIZATION_ID |
BOM_ALTERNATE_DESIGNATORS |
BOM_ALTERNATE_DESIGNATORS stores the alternate designators that you
use to define alternate bills of material and routings.
.
You cannot use the alternate designator to define an alternate bill or
routing after its DISABLE_DATE.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_ALTERNATE_DESIGNATORS_U1 | UNIQUE | APPS_TS_TX_IDX |
ALTERNATE_DESIGNATOR_CODE
ORGANIZATION_ID |
| BOM_ALTERNATE_DESIGNATORS_N1 | NONUNIQUE | APPS_TS_TX_IDX | ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_DESIGNATOR_CODE | VARCHAR2 | (10) | Alternate designator code | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DISABLE_DATE | DATE | Disable date | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| STRUCTURE_TYPE_ID | NUMBER | Structure Type Identifier | ||
| IS_PREFERRED | VARCHAR2 | (1) | Preferred Structure Name |
BOM.BOM_ALTERNATE_DESIGNATORS does not reference any database object
BOM.BOM_ALTERNATE_DESIGNATORS is referenced by following:
| Description: | Alternate Designators Translation table |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_ALTERNATE_DESIGNATORS_TL.ALTERNATE_DESIGNATOR_CODE
BOM_ALTERNATE_DESIGNATORS_TL.ORGANIZATION_ID |
BOM_ALTERNATE_DESIGNATORS |
Table to store the translation information of alternate designators (structure names)
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_ALTERNATE_DESIGNATORS_TL_U | UNIQUE | APPS_TS_TX_IDX |
LANGUAGE
ALTERNATE_DESIGNATOR_CODE ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_DESIGNATOR_CODE | VARCHAR2 | (10) | Alternate designator code | |
| ORGANIZATION_ID | NUMBER | Y | Organization id | |
| DISPLAY_NAME | VARCHAR2 | (80) | Y | Display Name for structure name |
| DESCRIPTION | VARCHAR2 | (240) | Structure name Description | |
| LANGUAGE | VARCHAR2 | (4) | Y | The language code of the language which the translatable fields are translated to |
| SOURCE_LANG | VARCHAR2 | (4) | Y | Language code of the language which the values of the translatable columns were originally entered |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column |
BOM.BOM_ALTERNATE_DESIGNATORS_TL does not reference any database object
BOM.BOM_ALTERNATE_DESIGNATORS_TL is referenced by following:
| Description: |
|---|
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_ATO_CONFIGS_TEMP_N1 | NONUNIQUE |
BASE_MODEL_ID
COMPONENT_ITEM_ID | |
| BOM_ATO_CONFIGS_TEMP_N2 | NONUNIQUE |
CONFIG_ITEM_ID
COMPONENT_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CONFIG_ITEM_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | |||
| BASE_MODEL_ID | NUMBER | |||
| COMPONENT_ITEM_ID | NUMBER | |||
| COMPONENT_CODE | VARCHAR2 | (240) | ||
| COMPONENT_QUANTITY | NUMBER | |||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | |||
| LAST_UPDATED_BY | NUMBER | |||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATE_LOGIN | NUMBER |
BOM.BOM_ATO_CONFIGS_TEMP does not reference any database object
BOM.BOM_ATO_CONFIGS_TEMP is referenced by following:
| Description: | Unique configuration definition |
|---|
BOM_ATO_CONFIGURATIONS stores information about configuration items.
Each configuration item is associated with a base model and has a list
of options and option classes chosen for the configuration. It also
contains the quantities of components per configuration item. The last
referenced date indicates the most recent date on which a duplicate
configuration was found by the AutoCreate Configuration program.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_ATO_CONFIGURATIONS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
BASE_MODEL_ID
ORGANIZATION_ID COMPONENT_ITEM_ID |
| BOM_ATO_CONFIGURATIONS_N2 | NONUNIQUE | APPS_TS_TX_IDX |
CONFIG_ITEM_ID
COMPONENT_ITEM_ID |
| BOM_ATO_CONFIGURATIONS_N3 | NONUNIQUE | APPS_TS_TX_IDX |
BASE_MODEL_ID
CONFIG_ITEM_ID COMPONENT_ITEM_ID |
| BOM_ATO_CONFIGURATIONS_N4 | NONUNIQUE | APPS_TS_TX_IDX | COMPONENT_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CONFIG_ITEM_ID | NUMBER | Y | Configuration item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| BASE_MODEL_ID | NUMBER | Y | Base model identifier | |
| COMPONENT_ITEM_ID | NUMBER | Y | Component item identifier | |
| COMPONENT_CODE | VARCHAR2 | (240) | Y | Concatenated string of item identifiers |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| COMPONENT_QUANTITY | NUMBER | Y | Quantity per of component | |
| LAST_REFERENCED_DATE | DATE | Y | Last referenced date of the configured item | |
| REQUEST_ID | NUMBER | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who column | ||
| PROGRAM_ID | NUMBER | Standard Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who column | ||
| CFM_ROUTING_FLAG | NUMBER | CFM_ROUTING_FLAG |
BOM.BOM_ATO_CONFIGURATIONS does not reference any database object
BOM.BOM_ATO_CONFIGURATIONS is referenced by following:
| Description: | Bills of material Header Temporary Table |
|---|
BOM_BILLS_HEADER_TEMP temporarily stores bills of material
before loading information into Oracle Bills of Material. This
table contains user friendly columns which allow you to easily enter
your data as well as their corresponding foreign keys. Oracle Bills
of Material will derive column values you do not enter, after
performing the proper validation.
This table is for future use.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_BILLS_HEADER_TEMP_N1 | NONUNIQUE | APPS_TS_INTERFACE | TRANSACTION_GROUP_ID |
| BOM_BILLS_HEADER_TEMP_N2 | NONUNIQUE | APPS_TS_INTERFACE | TRANSACTION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_GROUP_ID | NUMBER | Transaction group identifier | ||
| TRANSACTION_ID | NUMBER | Transaction identifier | ||
| ASSEMBLY_ITEM_NAME | VARCHAR2 | (81) | Concatenated bill item segments | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | Alternate designator code | |
| COMMON_ASSEMBLY_ITEM_NAME | VARCHAR2 | (81) | Assembly item name of common bill | |
| COMMON_ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code of common bill | |
| ASSEMBLY_TYPE | NUMBER | Assembly type: 1=Manufacturing bill 2=Engineering bill | ||
| ASSEMBLY_COMMENT | VARCHAR2 | (240) | Specific bill of material comment | |
| TRANSACTION_TYPE | VARCHAR2 | (30) | Transaction Type which specifies what oeration is to be performed on a record. | |
| RETURN_STATUS | VARCHAR2 | (1) | Return Status | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Delete group name | |
| DG_DESCRIPTION | VARCHAR2 | (240) | Delete group description | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from. |
BOM.BOM_BILLS_HEADER_TEMP does not reference any database object
BOM.BOM_BILLS_HEADER_TEMP is referenced by following:
| Description: | Bills of material archive |
|---|
Used by Delete Group program to archive deleted Bills of Material.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ASSEMBLY_ITEM_ID | NUMBER | Y | Inventory item identifier of manufactured assembly | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | Assembly item identifier of common bill | ||
| SPECIFIC_ASSEMBLY_COMMENT | VARCHAR2 | (240) | Specific bill of material comment | |
| PENDING_FROM_ECN | VARCHAR2 | (10) | Change notice that created this bill of material | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ASSEMBLY_TYPE | NUMBER | Y | Assembly Type: 1=Manufacturing bill 2=Engineering bill | |
| COMMON_BILL_SEQUENCE_ID | NUMBER | Y | Identifier of common bill | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| COMMON_ORGANIZATION_ID | NUMBER | Organization identifier of common bill | ||
| NEXT_EXPLODE_DATE | DATE | Next date when pre-explosion will be refreshed | ||
| PROJECT_ID | NUMBER | Project identifier for Project Manufacturing | ||
| TASK_ID | NUMBER | Task_identifier for Project Manufacturing | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from | |
| STRUCTURE_TYPE_ID | NUMBER | Structure Type Id | ||
| IMPLEMENTATION_DATE | DATE | Implementation date | ||
| OBJ_NAME | VARCHAR2 | (30) | Object name | |
| PK1_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK2_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK3_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK4_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK5_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| EFFECTIVITY_CONTROL | NUMBER | Effectivity control | ||
| IS_PREFERRED | VARCHAR2 | (1) | Flag to indicate if it is a preferrred bill | |
| SOURCE_BILL_SEQUENCE_ID | NUMBER | Source bill sequence id |
BOM.BOM_BILL_OF_MATERIALS_ARCHIVE does not reference any database object
BOM.BOM_BILL_OF_MATERIALS_ARCHIVE is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ASSEMBLYITEMNAME | VARCHAR2 | (81) | ||
| ORGANIZATIONCODE | VARCHAR2 | (3) | ||
| ALTERNATEBOMCODE | VARCHAR2 | (10) | ||
| COMMONASSEMBLYITEMNAME | VARCHAR2 | (81) | ||
| COMMONORGANIZATIONCODE | VARCHAR2 | (3) | ||
| ASSEMBLYCOMMENT | VARCHAR2 | (240) | ||
| ASSEMBLYTYPE | NUMBER | |||
| ATTRIBUTECATEGORY | VARCHAR2 | (30) | ||
| ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ATTRIBUTE15 | VARCHAR2 | (150) | ||
| ORIGINALSYSTEMREFERENCE | VARCHAR2 | (50) | ||
| DELETEGROUPNAME | VARCHAR2 | (10) | ||
| DGDESCRIPTION | VARCHAR2 | (240) | ||
| IMPLEMENTATIONDATE | DATE |
BOM.BOM_BILL_OF_MATERIALS_TEMP does not reference any database object
BOM.BOM_BILL_OF_MATERIALS_TEMP is referenced by following:
| Description: | Bills of material interface table |
|---|
BOM_BILL_OF_MTLS_INTERFACE temporarily stores bills of material
before loading information into Oracle Bills of Material. This
table contains user friendly columns which allow you to easily enter
your data as well as their corresponding foreign keys. Oracle Bills
of Material will derive column values you do not enter, after
performing the proper validation. For example, you enter the
ORGANIZATION_CODE and Oracle Bills of Material will fill in the
corresponding ORGANIZATION_ID for you.
.
Also, if you enter REVISION, Oracle Bills of Material will insert a
record into MTL_ITEM_REVISIONS for your bill item.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_BILL_OF_MTLS_INTERFACE_U1 | UNIQUE | APPS_TS_INTERFACE | TRANSACTION_ID |
| BOM_BILL_OF_MTLS_INTERFACE_N1 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_ID
ORGANIZATION_ID ALTERNATE_BOM_DESIGNATOR |
| BOM_BILL_OF_MTLS_INTERFACE_N2 | NONUNIQUE | APPS_TS_INTERFACE | BILL_SEQUENCE_ID |
| BOM_BILL_OF_MTLS_INTERFACE_N3 | NONUNIQUE | APPS_TS_INTERFACE | COMMON_BILL_SEQUENCE_ID |
| BOM_BILL_OF_MTLS_INTERFACE_N4 | NONUNIQUE | APPS_TS_INTERFACE | SET_ID |
| BOM_BILL_OF_MTLS_INTERFACE_N5 | NONUNIQUE | APPS_TS_INTERFACE |
PROCESS_FLAG
ORGANIZATION_ID TRANSACTION_ID |
| BOM_BILL_OF_MTLS_INTERFACE_N6 | NONUNIQUE | APPS_TS_INTERFACE |
ITEM_NUMBER
ORGANIZATION_CODE ALTERNATE_BOM_DESIGNATOR |
| BOM_BILL_OF_MTLS_INTERFACE_N7 | NONUNIQUE | APPS_TS_INTERFACE |
BATCH_ID
SOURCE_SYSTEM_REFERENCE PROCESS_FLAG |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of manufactured assembly | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of common assembly | ||
| SPECIFIC_ASSEMBLY_COMMENT | VARCHAR2 | (240) | Specific bill of material comment | |
| PENDING_FROM_ECN | VARCHAR2 | (10) | Change notice that created this bill | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ASSEMBLY_TYPE | NUMBER | Assembly Type: 1=Manufacturing bill 2=Engineering bill | ||
| COMMON_BILL_SEQUENCE_ID | NUMBER | Unique bill identifier for common bill | ||
| BILL_SEQUENCE_ID | NUMBER | Bill of material unique identifier | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| DEMAND_SOURCE_LINE | VARCHAR2 | (30) | Demand source line - used for ATO | |
| SET_ID | VARCHAR2 | (10) | Set identifier - used for ATO | |
| COMMON_ORGANIZATION_ID | NUMBER | Organization identifier of common organization | ||
| DEMAND_SOURCE_TYPE | NUMBER | Demand source type - used for ATO | ||
| DEMAND_SOURCE_HEADER_ID | NUMBER | Demand source header identifier - used for ATO | ||
| TRANSACTION_ID | NUMBER | Row identifier | ||
| PROCESS_FLAG | NUMBER | Row status | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Abbreviation of organization name | |
| COMMON_ORG_CODE | VARCHAR2 | (3) | Abbreviation of common organization name | |
| ITEM_NUMBER | VARCHAR2 | (240) | Concatenated bill item segments | |
| COMMON_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated common bill item segments | |
| NEXT_EXPLODE_DATE | DATE | Next date when pre-explosion will be refreshed | ||
| REVISION | VARCHAR2 | (3) | Bill revision | |
| TRANSACTION_TYPE | VARCHAR2 | (10) | Type of action: CREATE, UPDATE, or DELETE | |
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Delete group name for the entity type you are deleting | |
| DG_DESCRIPTION | VARCHAR2 | (240) | Description of the delete group | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from. | |
| IMPLEMENTATION_DATE | DATE | Implementation Date | ||
| OBJ_NAME | VARCHAR2 | (30) | Object name | |
| PK1_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK2_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK3_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK4_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK5_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| STRUCTURE_TYPE_NAME | VARCHAR2 | (80) | Structure type name | |
| STRUCTURE_TYPE_ID | NUMBER | Structure type identifier | ||
| EFFECTIVITY_CONTROL | NUMBER | Effectivity control | ||
| RETURN_STATUS | VARCHAR2 | (1) | Return status | |
| IS_PREFERRED | VARCHAR2 | (1) | Determines whether this structure is preferred or not. | |
| SOURCE_SYSTEM_REFERENCE | VARCHAR2 | (240) | Source system item name for import | |
| SOURCE_SYSTEM_REFERENCE_DESC | VARCHAR2 | (240) | Source system reference description | |
| BATCH_ID | NUMBER | Batch Identifier for Data Load | ||
| CHANGE_ID | NUMBER | Change Identifier | ||
| CATALOG_CATEGORY_NAME | VARCHAR2 | (240) | Item Catalog Category Name | |
| ITEM_CATALOG_GROUP_ID | NUMBER | Item Catalog Category Identifier | ||
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (25) | Primary unit of measure | |
| ITEM_DESCRIPTION | VARCHAR2 | (240) | Item description | |
| TEMPLATE_NAME | VARCHAR2 | (240) | Item Template Name | |
| SOURCE_BILL_SEQUENCE_ID | NUMBER | Source bill sequence id | ||
| ENABLE_ATTRS_UPDATE | VARCHAR2 | (1) | Indicates whether attributes of a Common BOM need to be updated. Possible values are 'Y'/'N'. | |
| INTERFACE_TABLE_UNIQUE_ID | NUMBER | Interface Table Unique Id for Merge | ||
| BUNDLE_ID | NUMBER | Bundle Id |
BOM.BOM_BILL_OF_MTLS_INTERFACE does not reference any database object
BOM.BOM_BILL_OF_MTLS_INTERFACE is referenced by following:
| Description: | Workday calendars |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_CALENDAR_DATES.CALENDAR_CODE | BOM_CALENDARS |
| BOM_CALENDAR_EXCEPTIONS.CALENDAR_CODE | BOM_CALENDARS |
| BOM_CALENDAR_SHIFTS.CALENDAR_CODE | BOM_CALENDARS |
| BOM_CAL_WEEK_START_DATES.CALENDAR_CODE | BOM_CALENDARS |
| BOM_CAL_YEAR_START_DATES.CALENDAR_CODE | BOM_CALENDARS |
| BOM_PERIOD_START_DATES.CALENDAR_CODE | BOM_CALENDARS |
| BOM_WORKDAY_PATTERNS.CALENDAR_CODE | BOM_CALENDARS |
| MTL_CYCLE_COUNT_HEADERS.CYCLE_COUNT_CALENDAR | BOM_CALENDARS |
| MTL_PARAMETERS.CALENDAR_CODE | BOM_CALENDARS |
| WSH_CALENDAR_ASSIGNMENTS.CALENDAR_CODE | BOM_CALENDARS |
BOM_CALENDARS stores the definition of your workday calendar.
.
You can follow any of the four following type of quarters for your
yearly calendar identified by Quarterly Calendar Type
=
1. 4-4-5 : quarterly pattern having two 4 weeks followed
by a 5 week period
2. 5-4-4 : one 5 week followed by two 4 week periods
3. 13 periods : for calendar year
4. regular months of calendar year
=
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CALENDARS_U1 | UNIQUE | APPS_TS_TX_IDX | CALENDAR_CODE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| QUARTERLY_CALENDAR_TYPE | NUMBER | Y | Quarterly Calendar Type Code | |
| DAYS_ON | NUMBER | Number of consecutive working days | ||
| DAYS_OFF | NUMBER | Number of consecutive non-working days | ||
| CALENDAR_START_DATE | DATE | Y | Beginning date for the calendar | |
| CALENDAR_END_DATE | DATE | Y | Ending date for the calendar | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| DATABASE_IN_SYNC | VARCHAR2 | (1) | Compiled calendar is up to date with the database (yes/no) |
BOM.BOM_CALENDARS does not reference any database object
BOM.BOM_CALENDARS is referenced by following:
| Description: | Workday calendar dates |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_CALENDAR_DATES.CALENDAR_CODE | BOM_CALENDARS |
| BOM_CALENDAR_DATES.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
| Foreign Key Column | Foreign Table |
|---|---|
|
CRP_CAL_SHIFT_DELTA.CALENDAR_CODE
CRP_CAL_SHIFT_DELTA.EXCEPTION_SET_ID CRP_CAL_SHIFT_DELTA.CALENDAR_DATE |
BOM_CALENDAR_DATES |
BOM_CALENDAR_DATES stores data compiled by the workday calendar for
the base calendar. This table stores every date between the calendar
start date and calendar end date for the given calendar using a
specified exception set.
.
The workday calendar program sequences each work day for the calendar,
starting with 1. Non-working days have NULL values for SEQ_NUM.
PRIOR_SEQ_NUM and NEXT_SEQ_NUM point to the previous and next
workdays. For rows that represent workdays, prior equals next. For
non-working days prior points to previous workday and next points to
next workday.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CALENDAR_DATES_U1 | UNIQUE | APPS_TS_TX_IDX |
CALENDAR_DATE
CALENDAR_CODE EXCEPTION_SET_ID |
| BOM_CALENDAR_DATES_N1 | NONUNIQUE | APPS_TS_TX_IDX |
NEXT_DATE
CALENDAR_CODE EXCEPTION_SET_ID |
| BOM_CALENDAR_DATES_N2 | NONUNIQUE | APPS_TS_TX_IDX |
PRIOR_DATE
CALENDAR_CODE EXCEPTION_SET_ID |
| BOM_CALENDAR_DATES_N3 | NONUNIQUE | APPS_TS_TX_IDX |
SEQ_NUM
CALENDAR_DATE CALENDAR_CODE EXCEPTION_SET_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| EXCEPTION_SET_ID | NUMBER | Y | Exception set unique identifier | |
| CALENDAR_DATE | DATE | Y | Calendar date | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| SEQ_NUM | NUMBER | Sequence number (for working days only) | ||
| NEXT_SEQ_NUM | NUMBER | Y | Next sequence number | |
| PRIOR_SEQ_NUM | NUMBER | Y | Prior sequence number | |
| NEXT_DATE | DATE | Y | Date corresponding to next sequence number | |
| PRIOR_DATE | DATE | Y | Date corresponding to prior sequence number | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_CALENDAR_DATES does not reference any database object
BOM.BOM_CALENDAR_DATES is referenced by following:
| Description: | Workday calendar exceptions |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_CALENDAR_EXCEPTIONS.CALENDAR_CODE | BOM_CALENDARS |
| BOM_CALENDAR_EXCEPTIONS.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
BOM_CALENDAR_EXCEPTIONS stores exception dates for a calendar. You can
define these exception dates to be working or non-working days. The
workday calendar program uses this information to generate your
workday calendar.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CALENDAR_EXCEPTIONS_U1 | UNIQUE | APPS_TS_TX_IDX |
CALENDAR_CODE
EXCEPTION_SET_ID EXCEPTION_DATE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| EXCEPTION_SET_ID | NUMBER | Y | Exception set unique identifier | |
| EXCEPTION_DATE | DATE | Y | Exception date | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| EXCEPTION_TYPE | NUMBER | Y | Exception type (1 for On and 2 for Off) | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_CALENDAR_EXCEPTIONS does not reference any database object
BOM.BOM_CALENDAR_EXCEPTIONS is referenced by following:
| Description: | Workday calendar shifts |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_CALENDAR_SHIFTS.CALENDAR_CODE | BOM_CALENDARS |
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_SHIFT_DATES.CALENDAR_CODE
BOM_SHIFT_DATES.SHIFT_NUM |
BOM_CALENDAR_SHIFTS |
|
BOM_SHIFT_EXCEPTIONS.CALENDAR_CODE
BOM_SHIFT_EXCEPTIONS.SHIFT_NUM |
BOM_CALENDAR_SHIFTS |
|
BOM_SHIFT_TIMES.CALENDAR_CODE
BOM_SHIFT_TIMES.SHIFT_NUM |
BOM_CALENDAR_SHIFTS |
|
BOM_WORKDAY_PATTERNS.CALENDAR_CODE
BOM_WORKDAY_PATTERNS.SHIFT_NUM |
BOM_CALENDAR_SHIFTS |
BOM_CALENDAR_SHIFTS stores the shift information that you define for a
calendar (CALENDAR_CODE). You define each shift (SHIFT_NUM), its
description (DESCRIPTION), and shift workday pattern (DAYS ON and DAYS
OFF). A calendar can have multiple shifts, each having its own
workday pattern and exception dates. Each shift also has its own shift
times. The workday calendar program generates a shift calendar for
every shift you define.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CALENDAR_SHIFTS_U1 | UNIQUE | APPS_TS_TX_IDX |
CALENDAR_CODE
SHIFT_NUM |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| SHIFT_NUM | NUMBER | Y | Shift number | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| DAYS_ON | NUMBER | Number of consecutive working days | ||
| DAYS_OFF | NUMBER | Number of consecutive non-working days | ||
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_CALENDAR_SHIFTS does not reference any database object
BOM.BOM_CALENDAR_SHIFTS is referenced by following:
| Description: | Workday calendar weekly start dates |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_CAL_WEEK_START_DATES.CALENDAR_CODE | BOM_CALENDARS |
| BOM_CAL_WEEK_START_DATES.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
BOM_CAL_WEEK_START_DATES stores all the weeks between the calendar
start date and calendar end date for a calendar and exception set. All
calendar week start dates are valid work days. A sequence is generated
beginning from the first week start date. The next week start date and
prior week start date are also stored in this table.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CAL_WEEK_START_DATES_U1 | UNIQUE | APPS_TS_TX_IDX |
CALENDAR_CODE
EXCEPTION_SET_ID WEEK_START_DATE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| EXCEPTION_SET_ID | NUMBER | Y | Exception set unique identifier | |
| WEEK_START_DATE | DATE | Y | Week start date | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| NEXT_DATE | DATE | Y | Date corresponding to the next working date | |
| PRIOR_DATE | DATE | Y | Date corresponding to the prior working date | |
| SEQ_NUM | NUMBER | Y | Sequence number (for working days) | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_CAL_WEEK_START_DATES does not reference any database object
BOM.BOM_CAL_WEEK_START_DATES is referenced by following:
| Description: | Workday calendar yearly start dates |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_CAL_YEAR_START_DATES.CALENDAR_CODE | BOM_CALENDARS |
| BOM_CAL_YEAR_START_DATES.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
BOM_CAL_YEAR_START_DATES stores the year start dates for your calendar
and exception set.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CAL_YEAR_START_DATES_U1 | UNIQUE | APPS_TS_TX_IDX |
CALENDAR_CODE
EXCEPTION_SET_ID YEAR_START_DATE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| EXCEPTION_SET_ID | NUMBER | Y | Exception set unique identifier | |
| YEAR_START_DATE | DATE | Y | Calendar year start date | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_CAL_YEAR_START_DATES does not reference any database object
BOM.BOM_CAL_YEAR_START_DATES is referenced by following:
| Description: | Bom Component User Attributes Interface Table |
|---|
BOM_CMP_USR_ATTR_INTERFACE stores attribute view information for structure import. Records in the table is identified by data set id, row identifier and attribute int name.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CMP_USR_ATTR_INTERFACE_U1 | UNIQUE | APPS_TS_INTERFACE |
DATA_SET_ID
ROW_IDENTIFIER ATTR_INT_NAME |
| BOM_CMP_USR_ATTR_INTERFACE_N1 | NONUNIQUE | APPS_TS_INTERFACE |
DATA_SET_ID
ATTR_GROUP_INT_NAME ATTR_INT_NAME |
| BOM_CMP_USR_ATTR_INTERFACE_N2 | NONUNIQUE | APPS_TS_INTERFACE |
ORGANIZATION_ID
COMPONENT_SEQUENCE_ID |
| BOM_CMP_USR_ATTR_INTERFACE_N3 | NONUNIQUE | APPS_TS_INTERFACE |
DATA_SET_ID
PROCESS_STATUS |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DATA_SET_ID | NUMBER | (15) | Y | An identifier for the collection of rows to be processed together; this value should correspond to the parent object's data set ID |
| PROCESS_STATUS | NUMBER | Whether this row is to be processed, being processed, encountered an error, or was processed successfully | ||
| TRANSACTION_TYPE | VARCHAR2 | (10) | Whether this row is to be part of a CREATE, UPDATE, SYNC, or DELETE operation | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | An identifier for the Organization to which the Item belongs; populate this column if ORGANIZATION_ID \is unknown | |
| ORGANIZATION_ID | NUMBER | (15) | The internal identifier for the Organization; if this column and ORGANIZATION_CODE are both populated, this column's value determines the Org | |
| ITEM_NUMBER | VARCHAR2 | (81) | An identifier for the Item composed of its Concatenated Segments | |
| COMPONENT_SEQUENCE_ID | NUMBER | (15) | The internal identifier for the Item (populate this value to speed up processing); if this column and ITEM_NUMBER are both populated, this column's value identifies the Item | |
| STRUCTURE_TYPE_ID | NUMBER | (15) | The catalog group to which the Item belongs, derived from ORGANIZATION_ID and INVENTORY_ITEM_ID (user should not populate) | |
| TRANSACTION_ID | NUMBER | (15) | A user-specified identifier (e.g., a spreadsheet row number) against which errors for each row will be logged | |
| ROW_IDENTIFIER | NUMBER | (38) | Y | An identifier for the collection of rows that make up one logical Attribute Group Row |
| ATTR_GROUP_ID | NUMBER | (15) | Identifier for the Attribute Group, derived from ATTR_GROUP_INT_NAME (foreign key to EGO_FND_DSC_FLX_CTX_EXT) | |
| ATTR_GROUP_INT_NAME | VARCHAR2 | (30) | Y | The internal name for the Attribute Group |
| ATTR_INT_NAME | VARCHAR2 | (30) | Y | The internal name for the Attribute |
| ATTR_VALUE_STR | VARCHAR2 | (1000) | The Attribute value, if its data type is String | |
| ATTR_VALUE_NUM | NUMBER | The Attribute value, if its data type is Number | ||
| ATTR_VALUE_DATE | DATE | The Attribute value, if its data type is Date | ||
| ATTR_DISP_VALUE | VARCHAR2 | (1000) | The Attribute value in its user-friendly form; used mainly for Attributes with Value Sets of validation type Independent or Table | |
| REQUEST_ID | NUMBER | (15) | Identifier for the request that starts the concurrent program that processes the row | |
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Identifier for the application that owns the concurrent program that processes the row | |
| PROGRAM_ID | NUMBER | (15) | Identifier for the concurrent program that processes the row | |
| PROGRAM_UPDATE_DATE | DATE | Time when the row was last updated by a concurrent program | ||
| CREATED_BY | NUMBER | (15) | One of the five standard "WHO" columns | |
| CREATION_DATE | DATE | One of the five standard "WHO" columns | ||
| LAST_UPDATED_BY | NUMBER | (15) | One of the five standard "WHO" columns | |
| LAST_UPDATE_DATE | DATE | One of the five standard "WHO" columns | ||
| LAST_UPDATE_LOGIN | NUMBER | (15) | One of the five standard "WHO" columns | |
| ATTR_GROUP_TYPE | VARCHAR2 | (240) | Attribute group type | |
| SOURCE_SYSTEM_ID | NUMBER | (15) | Source system identifier | |
| COMP_SOURCE_SYSTEM_REFERENCE | VARCHAR2 | (240) | Component source system reference | |
| BATCH_ID | NUMBER | Batch identifier | ||
| BILL_SEQUENCE_ID | NUMBER | Bill sequence id | ||
| INTERFACE_TABLE_UNIQUE_ID | NUMBER | Interface Table Unique Id for Merge | ||
| ATTR_UOM_DISP_VALUE | VARCHAR2 | (25) | Attribute UOM Display value | |
| ATTR_VALUE_UOM | VARCHAR2 | (5) | Attribute Value UOM | |
| ASSEMBLY_ITEM_NUMBER | VARCHAR2 | (240) | Assembly Item Number | |
| PARENT_SOURCE_SYSTEM_REFERENCE | VARCHAR2 | (240) | Parent Source System Reference | |
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| DATA_LEVEL_ID | NUMBER | |||
| DATA_LEVEL_NAME | VARCHAR2 | (40) | ||
| USER_DATA_LEVEL_NAME | VARCHAR2 | (240) |
BOM.BOM_CMP_USR_ATTR_INTERFACE does not reference any database object
BOM.BOM_CMP_USR_ATTR_INTERFACE is referenced by following:
| Description: | Temporary data for bill of material comparisons |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_COMPARISON_TEMP.COMPONENT_SEQUENCE_ID1 | BOM_COMPONENTS_B |
| BOM_COMPARISON_TEMP.COMPONENT_SEQUENCE_ID2 | BOM_COMPONENTS_B |
BOM_COMPARISON_TEMP stores information about a comparison of two bills
of material. This table is used by both Oracle Bills of Material and
Oracle Engineering for the View Bill of Material Comparison window
and the Bill of Material Comparison report.
.
Each row may have ASSEMBLY_ID1, or ASSEMBLY_ID2, or both the columns
populated. If ASSEMBLY_ID1 alone is populated it means that component
is unique to the first bill in the comparison. If ASSEMBLY_ID2 alone
is populated it means that component is unique to the second bill in
the comparison. If ASSEMBLY_ID1 and ASSEMBLY_ID2 are both populated,
it means that component is common to the two bills being compared.
.
SEQUENCE_ID is the unique key to this table for a given execution of
an inquiry or report. It contains the next available sequence number
from the sequence BOM_COMPARISON_TEMP_S.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_COMPARISON_TEMP_N1 | NONUNIQUE | SEQUENCE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_ID | NUMBER | Y | Unique ID used to identify the results of a comparison of two bills of material | |
| ASSEMBLY_ID1 | NUMBER | First assembly identifier | ||
| ASSEMBLY_ID2 | NUMBER | Second assembly identifier | ||
| ITEM_NUM | NUMBER | Item sequence within bill of material structure, which overrides operation sequence number as basis for BOM sorts | ||
| COMPONENT_QUANTITY | NUMBER | Quantity of component in parent assembly | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| COMPONENT_YIELD_FACTOR | NUMBER | Factor by which a quantity is multiplied to obtain component yield | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| DISABLE_DATE | DATE | Disable date | ||
| IMPLEMENTATION_DATE | DATE | Date on which engineering change will be implemented | ||
| PLANNING_FACTOR | NUMBER | Planning factor | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| OPTIONAL | NUMBER | Optional (yes or no) | ||
| COMPONENT_SEQUENCE_ID1 | NUMBER | Component sequence ID in first bill of material | ||
| COMPONENT_SEQUENCE_ID2 | NUMBER | Component sequence ID in second bill of material | ||
| COMPONENT_NAME | VARCHAR2 | (255) | Component name | |
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | Current end item unit number | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | New end item unit number |
BOM.BOM_COMPARISON_TEMP does not reference any database object
BOM.BOM_COMPARISON_TEMP is referenced by following:
| Description: | Bill of material components |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_COMPONENTS_B.REVISED_ITEM_SEQUENCE_ID | ENG_REVISED_ITEMS |
| BOM_COMPONENTS_B.BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
| BOM_COMPONENTS_B.OLD_COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_COMPARISON_TEMP.COMPONENT_SEQUENCE_ID1 | BOM_COMPONENTS_B |
| BOM_COMPARISON_TEMP.COMPONENT_SEQUENCE_ID2 | BOM_COMPONENTS_B |
| BOM_COMPONENTS_B.OLD_COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
| BOM_COMPONENT_OPERATIONS.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
| BOM_DELETE_SUB_ENTITIES.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
| BOM_EXPLOSION_TEMP.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
| BOM_IMPLOSION_TEMP.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
| BOM_REFERENCE_DESIGNATORS.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
| BOM_SMALL_EXPL_TEMP.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
| BOM_SUBSTITUTE_COMPONENTS.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
| MTL_DEMAND.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
| OE_ORDER_LINES_ALL.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
| WIP_REQUIREMENT_OPERATIONS.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
BOM_COMPONENTS_B stores information about bills of material
components. This table only stores single-level components.
COMPONENT_SEQUENCE_ID uniquely identifies each row. There is one row
per component on an operation within a given date range.
.
This table is the main child table of BOM_STRUCTURES_B and
references the parent using BILL_SEQUENCE_ID. It uses
EFFECTIVITY_DATE and DISABLE_DATE to time phase components into a bill
of material. The Bill of Material window enforces that only
one row for a component in an operation is effective at a given time.
.
REVISED_ITEM_SEQUENCE_ID points to the revised item on an ECO that
affects a particular component row. If IMPLEMENTATION_DATE is null,
the component is pending on an engineering change that has not yet
been implemented. IMPLEMENTATION_DATE is either NULL (pending on ECO)
or equals EFFECTIVITY_DATE (implemented). OLD_COMPONENT_SEQUENCE_ID
points to the original component row affected by this component row
through an engineering change.
.
This table also contains certain columns relating to shipping, billing
and accounting for revenue on a customer order through Oracle Order
Management. CHECK_ATP determines if an ATP check is required for
this item when placing an order and overrides the Item level ATP flag.
LOW_QUANTITY and HIGH_QUANTITY define minimum and maximum quantities
of this component item that can be placed on an order if the customer
chooses to override COMPONENT_QUANTITY. OPTIONAL decides if a
component is a required option class you have to choose from (for
Option Class items) or a required item (for Standard items) when
taking an order. For Option Class items, MUTUALLY_EXCLUSIVE_OPTIONS
decides if one or more of its components can be placed on an order
when you pick this option class.
.
OPERATION_LEAD_TIME_PERCENT is denormalized for performance from
BOM_OPERATION_SEQUENCES when rolling up cumulative leadtimes.
.
The ORGANIZATION_ID for the component can be derived from the
BOM_BILL_OF_MATERIALS table using BILL_SEQUENCE_ID.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_COMPONENTS_B_U2 | UNIQUE | APPS_TS_TX_IDX | COMPONENT_SEQUENCE_ID |
| BOM_COMPONENTS_B_N1 | NONUNIQUE | APPS_TS_TX_IDX |
COMPONENT_ITEM_ID
BILL_SEQUENCE_ID EFFECTIVITY_DATE |
| BOM_COMPONENTS_B_N10 | NONUNIQUE | APPS_TS_TX_IDX | COMMON_COMPONENT_SEQUENCE_ID |
| BOM_COMPONENTS_B_N3 | NONUNIQUE | APPS_TS_TX_IDX | REVISED_ITEM_SEQUENCE_ID |
| BOM_COMPONENTS_B_N4 | NONUNIQUE | APPS_TS_TX_IDX | OLD_COMPONENT_SEQUENCE_ID |
| BOM_COMPONENTS_B_N6 | NONUNIQUE | APPS_TS_TX_IDX |
BILL_SEQUENCE_ID
FROM_END_ITEM_UNIT_NUMBER COMPONENT_ITEM_ID |
| BOM_COMPONENTS_B_N8 | NONUNIQUE | APPS_TS_TX_IDX |
BILL_SEQUENCE_ID
EFFECTIVITY_DATE COMPONENT_ITEM_ID OPERATION_SEQ_NUM FROM_END_ITEM_UNIT_NUMBER |
| BOM_COMPONENTS_B_N9 | NONUNIQUE | APPS_TS_TX_IDX |
PK1_VALUE
PK2_VALUE EFFECTIVITY_DATE DISABLE_DATE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_SEQ_NUM | NUMBER | Y | Operation sequence number | |
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ITEM_NUM | NUMBER | Item sequence within bill of material structure | ||
| COMPONENT_QUANTITY | NUMBER | Y | Quantity of component in bill of material | |
| COMPONENT_YIELD_FACTOR | NUMBER | Y | Factor used to multiply component quantity with to obtain required component quantity | |
| COMPONENT_REMARKS | VARCHAR2 | (240) | Component remarks | |
| EFFECTIVITY_DATE | DATE | Y | Effective date | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| IMPLEMENTATION_DATE | DATE | Date on which engineering change order was implemented | ||
| DISABLE_DATE | DATE | Disable date | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PLANNING_FACTOR | NUMBER | Y | Factor used to multiply component quantity with to obtain planning quantity | |
| QUANTITY_RELATED | NUMBER | Y | Identifier to indicate if this component has quantity related reference designators | |
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Management to determine how many units of component to put on an order | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | Y | Flag indicating if this component is to be used when rolling up costs | |
| CHECK_ATP | NUMBER | Y | Flag indicating if ATP check is required | |
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to ship | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is displayed on shipping documents | ||
| INCLUDE_ON_BILL_DOCS | NUMBER | (not currently used) | ||
| LOW_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| HIGH_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| ACD_TYPE | NUMBER | Add, change, or disable code for component on an engineering change order | ||
| OLD_COMPONENT_SEQUENCE_ID | NUMBER | Identifier of original component row an ECO effects | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| WIP_SUPPLY_TYPE | NUMBER | WIP supply type code | ||
| PICK_COMPONENTS | NUMBER | (not currently used) | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator identifier | ||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Operation offset from first operation in routing (denormalized from corresponding column in BOM_OPERATION_SEQUNCES) | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Engineering change order revised item identifier | ||
| COST_FACTOR | NUMBER | (not currently used) | ||
| BOM_ITEM_TYPE | NUMBER | Type of item (denormalized from BOM Item Type in MTL_SYSTEM_ITEMS) | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | From End Item Unit Number | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | To End Item Unit Number | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from | |
| ECO_FOR_PRODUCTION | NUMBER | Indicates if this component on an Engineering Change Order is only for WIP jobs | ||
| ENFORCE_INT_REQUIREMENTS | NUMBER | Enforce Integer Requirements | ||
| COMPONENT_ITEM_REVISION_ID | NUMBER | Item revision Identifier | ||
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Delete group name for the entity type you are deleting | |
| DG_DESCRIPTION | VARCHAR2 | (240) | Description of the delete group | |
| OPTIONAL_ON_MODEL | NUMBER | Flag indicating if component is optional on model bill (for ATO) | ||
| PARENT_BILL_SEQ_ID | NUMBER | Common bill sequence id of the model bill (for ATO) | ||
| MODEL_COMP_SEQ_ID | NUMBER | Component sequence identifier from model bill (for ATO) | ||
| PLAN_LEVEL | NUMBER | Plan level based on model bill (for ATO) | ||
| FROM_BILL_REVISION_ID | NUMBER | From Bill Revision Id | ||
| TO_BILL_REVISION_ID | NUMBER | To Bill Revision Id | ||
| AUTO_REQUEST_MATERIAL | VARCHAR2 | (1) | Flag to indicate if the item is automatically requested or not | |
| SUGGESTED_VENDOR_NAME | VARCHAR2 | (240) | Suggested vendor name will be used for direct items for EAM BOMs | |
| VENDOR_ID | NUMBER | Suggested Vendor ID column | ||
| UNIT_PRICE | NUMBER | Unit Price for direct items used by EAM BOMs | ||
| OBJ_NAME | VARCHAR2 | (30) | Object Name | |
| PK1_VALUE | VARCHAR2 | (240) | Primary Key id of the object | |
| PK2_VALUE | VARCHAR2 | (240) | Primary Key id of the object | |
| PK3_VALUE | VARCHAR2 | (240) | Primary Key of the object | |
| PK4_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK5_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| FROM_END_ITEM_REV_ID | NUMBER | From End Item Revision Id | ||
| TO_END_ITEM_REV_ID | NUMBER | To End Item Revision Id | ||
| OVERLAPPING_CHANGES | NUMBER | Overlapping Changes | ||
| FROM_OBJECT_REVISION_ID | NUMBER | From Object Revision Id | ||
| FROM_MINOR_REVISION_ID | NUMBER | From Minor Revision Id | ||
| TO_OBJECT_REVISION_ID | NUMBER | To Object Revision Id | ||
| TO_MINOR_REVISION_ID | NUMBER | To Minor Revision Id | ||
| FROM_END_ITEM_MINOR_REV_ID | NUMBER | From End Item Minor Rev Id | ||
| TO_END_ITEM_MINOR_REV_ID | NUMBER | To End Item Minor Rev Id | ||
| COMPONENT_MINOR_REVISION_ID | NUMBER | Component Minor Revision Id | ||
| FROM_STRUCTURE_REVISION_CODE | VARCHAR2 | (30) | From structure revision code | |
| TO_STRUCTURE_REVISION_CODE | VARCHAR2 | (30) | To structure revision code | |
| FROM_END_ITEM_STRC_REV_ID | NUMBER | (not currently used) | ||
| TO_END_ITEM_STRC_REV_ID | NUMBER | (not currently used) | ||
| BASIS_TYPE | NUMBER | Basis type identifier | ||
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common Component Sequence Id |
BOM.BOM_COMPONENTS_B does not reference any database object
BOM.BOM_COMPONENTS_B is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EXTENSION_ID | NUMBER | Y | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | ||
| STRUCTURE_TYPE_ID | NUMBER | Y | ||
| ATTR_GROUP_ID | NUMBER | Y | ||
| CREATED_BY | NUMBER | (15) | Y | |
| CREATION_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | (15) | Y | |
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATE_LOGIN | NUMBER | (15) | ||
| C_EXT_ATTR1 | VARCHAR2 | (150) | ||
| C_EXT_ATTR2 | VARCHAR2 | (150) | ||
| C_EXT_ATTR3 | VARCHAR2 | (150) | ||
| C_EXT_ATTR4 | VARCHAR2 | (150) | ||
| C_EXT_ATTR5 | VARCHAR2 | (150) | ||
| C_EXT_ATTR6 | VARCHAR2 | (150) | ||
| C_EXT_ATTR7 | VARCHAR2 | (150) | ||
| C_EXT_ATTR8 | VARCHAR2 | (150) | ||
| C_EXT_ATTR9 | VARCHAR2 | (150) | ||
| C_EXT_ATTR10 | VARCHAR2 | (150) | ||
| C_EXT_ATTR11 | VARCHAR2 | (150) | ||
| C_EXT_ATTR12 | VARCHAR2 | (150) | ||
| C_EXT_ATTR13 | VARCHAR2 | (150) | ||
| C_EXT_ATTR14 | VARCHAR2 | (150) | ||
| C_EXT_ATTR15 | VARCHAR2 | (150) | ||
| C_EXT_ATTR16 | VARCHAR2 | (150) | ||
| C_EXT_ATTR17 | VARCHAR2 | (150) | ||
| C_EXT_ATTR18 | VARCHAR2 | (150) | ||
| C_EXT_ATTR19 | VARCHAR2 | (150) | ||
| C_EXT_ATTR20 | VARCHAR2 | (150) | ||
| C_EXT_ATTR21 | VARCHAR2 | (150) | ||
| C_EXT_ATTR22 | VARCHAR2 | (150) | ||
| C_EXT_ATTR23 | VARCHAR2 | (150) | ||
| C_EXT_ATTR24 | VARCHAR2 | (150) | ||
| C_EXT_ATTR25 | VARCHAR2 | (150) | ||
| C_EXT_ATTR26 | VARCHAR2 | (150) | ||
| C_EXT_ATTR27 | VARCHAR2 | (150) | ||
| C_EXT_ATTR28 | VARCHAR2 | (150) | ||
| C_EXT_ATTR29 | VARCHAR2 | (150) | ||
| C_EXT_ATTR30 | VARCHAR2 | (150) | ||
| C_EXT_ATTR31 | VARCHAR2 | (150) | ||
| C_EXT_ATTR32 | VARCHAR2 | (150) | ||
| C_EXT_ATTR33 | VARCHAR2 | (150) | ||
| C_EXT_ATTR34 | VARCHAR2 | (150) | ||
| C_EXT_ATTR35 | VARCHAR2 | (150) | ||
| C_EXT_ATTR36 | VARCHAR2 | (150) | ||
| C_EXT_ATTR37 | VARCHAR2 | (150) | ||
| C_EXT_ATTR38 | VARCHAR2 | (150) | ||
| C_EXT_ATTR39 | VARCHAR2 | (150) | ||
| C_EXT_ATTR40 | VARCHAR2 | (150) | ||
| N_EXT_ATTR1 | NUMBER | |||
| N_EXT_ATTR2 | NUMBER | |||
| N_EXT_ATTR3 | NUMBER | |||
| N_EXT_ATTR4 | NUMBER | |||
| N_EXT_ATTR5 | NUMBER | |||
| N_EXT_ATTR6 | NUMBER | |||
| N_EXT_ATTR7 | NUMBER | |||
| N_EXT_ATTR8 | NUMBER | |||
| N_EXT_ATTR9 | NUMBER | |||
| N_EXT_ATTR10 | NUMBER | |||
| N_EXT_ATTR11 | NUMBER | |||
| N_EXT_ATTR12 | NUMBER | |||
| N_EXT_ATTR13 | NUMBER | |||
| N_EXT_ATTR14 | NUMBER | |||
| N_EXT_ATTR15 | NUMBER | |||
| N_EXT_ATTR16 | NUMBER | |||
| N_EXT_ATTR17 | NUMBER | |||
| N_EXT_ATTR18 | NUMBER | |||
| N_EXT_ATTR19 | NUMBER | |||
| N_EXT_ATTR20 | NUMBER | |||
| D_EXT_ATTR1 | DATE | |||
| D_EXT_ATTR2 | DATE | |||
| D_EXT_ATTR3 | DATE | |||
| D_EXT_ATTR4 | DATE | |||
| D_EXT_ATTR5 | DATE | |||
| D_EXT_ATTR6 | DATE | |||
| D_EXT_ATTR7 | DATE | |||
| D_EXT_ATTR8 | DATE | |||
| D_EXT_ATTR9 | DATE | |||
| D_EXT_ATTR10 | DATE | |||
| UOM_EXT_ATTR1 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR2 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR3 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR4 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR5 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR6 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR7 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR8 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR9 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR10 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR11 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR12 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR13 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR14 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR15 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR16 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR17 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR18 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR19 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR20 | VARCHAR2 | (3) | ||
| BILL_SEQUENCE_ID | NUMBER | |||
| REQUEST_ID | NUMBER |
BOM.BOM_COMPONENTS_EXT_B does not reference any database object
BOM.BOM_COMPONENTS_EXT_B is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EXTENSION_ID | NUMBER | Y | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | ||
| STRUCTURE_TYPE_ID | NUMBER | Y | ||
| ATTR_GROUP_ID | NUMBER | Y | ||
| SOURCE_LANG | VARCHAR2 | (30) | Y | |
| LANGUAGE | VARCHAR2 | (30) | Y | |
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y | ||
| LAST_UPDATE_LOGIN | NUMBER | Y | ||
| CREATED_BY | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| TL_EXT_ATTR1 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR2 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR3 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR4 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR5 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR6 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR7 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR8 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR9 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR10 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR11 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR12 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR13 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR14 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR15 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR16 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR17 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR18 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR19 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR20 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR21 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR22 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR23 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR24 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR25 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR26 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR27 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR28 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR29 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR30 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR31 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR32 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR33 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR34 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR35 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR36 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR37 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR38 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR39 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR40 | VARCHAR2 | (1000) | ||
| BILL_SEQUENCE_ID | NUMBER |
BOM.BOM_COMPONENTS_EXT_TL does not reference any database object
BOM.BOM_COMPONENTS_EXT_TL is referenced by following:
| Description: | BOM COMPONENT COLUMNS TABLE |
|---|
BOM COMPONENT COLUMNS TABLE
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_COMPONENTS_COLUMNS_U1 | UNIQUE | APPS_TS_TX_IDX |
OBJECT_TYPE
ATTRIBUTE_GROUP ATTRIBUTE_CODE APPLICATION_SHORT_NAME |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| APPLICATION_SHORT_NAME | VARCHAR2 | (240) | Y | Application Short Name |
| ATTRIBUTE_GROUP | VARCHAR2 | (240) | ATTRIBUTE GROUP | |
| ATTRIBUTE_CODE | VARCHAR2 | (30) | Y | ATTRIBUTE CODE |
| OBJECT_TYPE | VARCHAR2 | (240) | OBJECT_TYPE | |
| LAST_UPDATE_DATE | DATE | Standard Who Column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Standard Who Column | ||
| CREATED_BY | NUMBER | Standard Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| DISPLAY_NAME | VARCHAR2 | (30) | DISPLAY NAME | |
| SORTABLE | VARCHAR2 | (1) | SORTABLE | |
| TABLE_NAME | VARCHAR2 | (240) | TABLE NAME | |
| TABLE_COLUMN_NAME | VARCHAR2 | (2000) | COLUMN_NAME | |
| TABLE_ALIAS_NAME | VARCHAR2 | (240) | TABLE ALIAS NAME | |
| BASE_WHERE_CLAUSE | VARCHAR2 | (4000) | WHERE CLAUSE | |
| PARENT_ENTITY | VARCHAR2 | (240) | Parent entity | |
| ADDITIONAL_JOIN_TABLES | VARCHAR2 | (4000) | Extra Table Name | |
| BOM_INTF_COLUMN_NAME | VARCHAR2 | (240) | Bom interface column name | |
| BOM_INTF_TABLE_NAME | VARCHAR2 | (240) | BOM interface table name | |
| AVAILABLE_IN_RESULT_FORMAT | VARCHAR2 | (1) | Available in Result Format flag | |
| AVAILABLE_IN_CRITERIA | VARCHAR2 | (1) | Available in Criteria Flag | |
| OPERATION_TYPE | VARCHAR2 | (240) | Data Type / Operation Type | |
| LOV_OR_POPLIST_SQL | VARCHAR2 | (4000) | Lov/Poplist Sql according to operation type | |
| ADDITIONAL_JOIN_CONDITIONS | VARCHAR2 | (4000) | Additional join conditions | |
| ATTRIBUTE_GROUP_DISPLAY_NAME | VARCHAR2 | (4000) | Attribute Group Display Name | |
| PREDEFINED | VARCHAR2 | (1) | Predefined column is used to determine if the attribute is predefined or seeded | |
| UPDATE_ALLOWED | VARCHAR2 | (1) | Updatable | |
| VALUESET_NAME | VARCHAR2 | (240) | Value set name | |
| LOOKUP_TYPE | VARCHAR2 | (30) | Holds the value of lookup_type, which will be used to convert the code to meaning. | |
| DISPLAY_TYPE | VARCHAR2 | (240) | Holds the display type value for the attribute | |
| ATTRIBUTE_SEQUENCE | NUMBER | The sequence in which the attribute should appear in an attribute group. |
BOM.BOM_COMPONENT_COLUMNS does not reference any database object
BOM.BOM_COMPONENT_COLUMNS is referenced by following:
| Description: | Additional operations for a Bill of Material Component |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_COMPONENT_OPERATIONS.BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
| BOM_COMPONENT_OPERATIONS.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
| BOM_COMPONENT_OPERATIONS.OPERATION_SEQUENCE_ID | BOM_OPERATION_SEQUENCES |
BOM_COMPONENT_OPERATIONS stores information about the additional routing operations for a bill of material component.
Component operations allow a component to have multiple operations without having to replicate the component rows. The operation sequence number of the component row in BOM_INVENTORY_COMPONENTS is the consuming operation.
Component operations can be defined only for the optional components.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_COMPONENT_OPERATIONS_U1 | UNIQUE | APPS_TS_TX_IDX | COMP_OPERATION_SEQ_ID |
| BOM_COMPONENT_OPERATIONS_U2 | UNIQUE | APPS_TS_TX_IDX |
COMPONENT_SEQUENCE_ID
OPERATION_SEQ_NUM |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COMP_OPERATION_SEQ_ID | NUMBER | Y | Component operation unique identifier | |
| OPERATION_SEQ_NUM | NUMBER | Y | Operation Sequence Number, showing the sequences of process and line operations | |
| OPERATION_SEQUENCE_ID | NUMBER | Y | Operation sequence identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| CONSUMING_OPERATION_FLAG | VARCHAR2 | (1) | Consuming operation indicator | |
| CONSUMPTION_QUANTITY | NUMBER | Consumption quantity | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator identifier | ||
| WIP_SUPPLY_TYPE | NUMBER | WIP supply type code | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common Component Sequence Id | ||
| REQUEST_ID | NUMBER | Concurrent WHO columns | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent WHO columns | ||
| PROGRAM_ID | NUMBER | Concurrent WHO columns | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent WHO columns |
BOM.BOM_COMPONENT_OPERATIONS does not reference any database object
BOM.BOM_COMPONENT_OPERATIONS is referenced by following:
| Description: | Additional operations for a Bill of Material Component |
|---|
BOM_COMP_OPS_INTERFACE stores interface data about the additional routing operations for a bill of material component.
Component operations allow a component to have multiple operations without having to replicate the component rows. The operation sequence number of the component row in BOM_INVENTORY_COMPONENTS is the consuming operation.
Component operations can be defined only for the optional components.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_COMPONENT_OPS_INTERFACE_N1 | NONUNIQUE | APPS_TS_INTERFACE | TRANSACTION_ID |
| BOM_COMPONENT_OPS_INTERFACE_N2 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_NUMBER
ORGANIZATION_CODE ALTERNATE_BOM_DESIGNATOR |
| BOM_COMPONENT_OPS_INTERFACE_N3 | NONUNIQUE | APPS_TS_INTERFACE |
PROCESS_FLAG
ORGANIZATION_ID TRANSACTION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COMP_OPERATION_SEQ_ID | NUMBER | Component operation unique identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation Sequence Number, showing the sequences of process and line operations | ||
| ADDITIONAL_OPERATION_SEQ_NUM | NUMBER | Operation Sequence Number, showing the sequences of process and line operations | ||
| NEW_ADDITIONAL_OP_SEQ_NUM | NUMBER | Operation Sequence Number, showing the sequences of process and line operations | ||
| OPERATION_SEQUENCE_ID | NUMBER | Operation sequence identifier | ||
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| BILL_SEQUENCE_ID | NUMBER | Bill of material unique identifier | ||
| CONSUMING_OPERATION_FLAG | VARCHAR2 | (1) | Consuming operation indicator | |
| CONSUMPTION_QUANTITY | NUMBER | Consumption quantity | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator identifier | ||
| WIP_SUPPLY_TYPE | NUMBER | WIP supply type code | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of the bill | ||
| ASSEMBLY_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated item segments of the bill | |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (240) | Alternate designator code | |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| ORGANIZATION_CODE | VARCHAR2 | (240) | Abbreviation of organization name | |
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| COMPONENT_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated item segments of the component | |
| EFFECTIVITY_DATE | DATE | Effective date | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (240) | From End Item Unit Number | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (240) | To End Item Unit Number | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (240) | Original system that data for the current record has come from | |
| TRANSACTION_ID | NUMBER | Row identifier | ||
| PROCESS_FLAG | NUMBER | Row status | ||
| TRANSACTION_TYPE | VARCHAR2 | (240) | Type of action: CREATE, UPDATE or DELETE | |
| RETURN_STATUS | VARCHAR2 | (1) | Return status | |
| BATCH_ID | NUMBER | Batch Identifier for Data Load | ||
| COMP_SOURCE_SYSTEM_REFERENCE | VARCHAR2 | (240) | Component Source System Item Name | |
| PARENT_SOURCE_SYSTEM_REFERENCE | VARCHAR2 | (240) | Parent Source System Item Name | |
| ASSEMBLY_ITEM_REVISION_CODE | VARCHAR2 | (240) | Assembly item revision code | |
| ASSEMBLY_ITEM_REVISION_ID | NUMBER | Assembly item revision id |
BOM.BOM_COMPONENT_OPS_INTERFACE does not reference any database object
BOM.BOM_COMPONENT_OPS_INTERFACE is referenced by following:
| Description: |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_COMPONENT_TYPES.STRUCTURE_TYPE_ID | BOM_STRUCTURE_TYPES_B |
BOM_COMPONENT_TYPES stores BOM component type information. It is child table of BOM_STRUCTURE_TYPES_B. Records in the table are uniquely identified by component_catalog_group_id, structure_type_id
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_COMPONENT_TYPES_U1 | UNIQUE | APPS_TS_TX_IDX |
COMPONENT_CATALOG_GROUP_ID
STRUCTURE_TYPE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COMPONENT_CATALOG_GROUP_ID | NUMBER | Y | Component Catalog Group Identifier | |
| STRUCTURE_TYPE_ID | NUMBER | Y | Structure type unique identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Y | Standard Who Column | |
| EFFECTIVE_DATE | DATE | Y | Effective Date | |
| PARENT_REV_CHANGE_CODE | NUMBER | Y | Parent revision change code | |
| COMPONENT_REV_CHANGE_CODE | NUMBER | Y | Component revision change code | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DISABLE_DATE | DATE | Disable date |
BOM.BOM_COMPONENT_TYPES does not reference any database object
BOM.BOM_COMPONENT_TYPES is referenced by following:
| Description: | Bill of material components interface data |
|---|
BOM_COMP_OPTCLASS_TEMP temporarily stores information about
bill of material components.
This table contains user friendly columns which allow you to easily
enter your data as well as their corresponding foreign keys.
This table is for future use.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_COMP_OPTCLASS_TEMP_N2 | NONUNIQUE | APPS_TS_INTERFACE | TRANSACTION_ID |
| BOM_COMP_OPTCLASS_TEMP_N3 | NONUNIQUE | APPS_TS_INTERFACE |
TRANSACTION_GROUP_ID
TRANSACTION_ID ASSEMBLY_ITEM_NAME ORGANIZATION_CODE ALTERNATE_BOM_CODE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_GROUP_ID | NUMBER | Transaction group identifier | ||
| TRANSACTION_ID | NUMBER | Transaction identifier | ||
| ASSEMBLY_ITEM_NAME | VARCHAR2 | (81) | Concatenated bill item segments | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | Alternate designator code | |
| START_EFFECTIVE_DATE | DATE | Effective date | ||
| COMPONENT_ITEM_NAME | VARCHAR2 | (81) | Concatenated component item segments | |
| OPERATION_SEQUENCE_NUMBER | NUMBER | Operation sequence number | ||
| ITEM_SEQUENCE_NUMBER | NUMBER | Item sequence within bill of material structure | ||
| DISABLE_DATE | DATE | Disable date | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| LOCATION_NAME | VARCHAR2 | (81) | Supply location name | |
| PLANNING_PERCENT | NUMBER | Factor used to multiply component quantity with to obtain planning quantity | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| MINIMUM_ALLOWED_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| MAXIMUM_ALLOWED_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| WIP_SUPPLY_TYPE | NUMBER | WIP supply type code | ||
| QUANTITY_PER_ASSEMBLY | NUMBER | Quantity of component in bill of material | ||
| PROJECTED_YIELD | NUMBER | Factor used to multiply component quantity to obtain required component quantity | ||
| COMMENTS | VARCHAR2 | (240) | Component remarks | |
| QUANTITY_RELATED | NUMBER | Identifier to indicate if this component has quantity related reference designators | ||
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Management to determine how many units of component to put on an order | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill | ||
| MUTUALLY_EXCLUSIVE | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | Flag indicating if this component is to be used when rolling up costs | ||
| CHECK_ATP | NUMBER | Flag indicating if ATP check is required | ||
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to ship | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is displayed on shipping documents | ||
| NEW_EFFECTIVITY_DATE | DATE | Updated value for the effectivity_date | ||
| NEW_OPERATION_SEQUENCE_NUMBER | NUMBER | Updated value for the operation_seq_num | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | From End Item Unit Number | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | To End Item Unit Number | |
| TRANSACTION_TYPE | VARCHAR2 | (10) | Type of action: CREATE, UPDATE or DELETE | |
| RETURN_STATUS | VARCHAR2 | (1) | Return Status | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Delete group name | |
| DG_DESCRIPTION | VARCHAR2 | (240) | Delete group description | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from. |
BOM.BOM_COMP_OPTCLASS_TEMP does not reference any database object
BOM.BOM_COMP_OPTCLASS_TEMP is referenced by following:
| Description: | Bill of material components interface data |
|---|
BOM_COMP_OPTIONS_TEMP temporarily stores information about
bill of material components.
This table contains user friendly columns which allow you to easily
enter your data as well as their corresponding foreign keys.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_COMP_OPTIONS_TEMP_N2 | NONUNIQUE | APPS_TS_INTERFACE | TRANSACTION_ID |
| BOM_COMP_OPTIONS_TEMP_N3 | NONUNIQUE | APPS_TS_INTERFACE |
TRANSACTION_GROUP_ID
TRANSACTION_ID ASSEMBLY_ITEM_NAME ORGANIZATION_CODE ALTERNATE_BOM_CODE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_GROUP_ID | NUMBER | Transaction group identifier | ||
| TRANSACTION_ID | NUMBER | Transaction identifier | ||
| ASSEMBLY_ITEM_NAME | VARCHAR2 | (81) | Concatenated bill item segments | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | Alternate designator code | |
| START_EFFECTIVE_DATE | DATE | Effective date | ||
| COMPONENT_ITEM_NAME | VARCHAR2 | (81) | Concatenated component item segments | |
| OPERATION_SEQUENCE_NUMBER | NUMBER | Operation sequence number | ||
| ITEM_SEQUENCE_NUMBER | NUMBER | Item sequence within bill of material structure | ||
| DISABLE_DATE | DATE | Disable date | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| LOCATION_NAME | VARCHAR2 | (81) | Supply location name | |
| PLANNING_PERCENT | NUMBER | Factor used to multiply component quantity with to obtain planning quantity | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| MINIMUM_ALLOWED_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| MAXIMUM_ALLOWED_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| WIP_SUPPLY_TYPE | NUMBER | WIP supply type code | ||
| QUANTITY_PER_ASSEMBLY | NUMBER | Quantity of component in bill of material | ||
| PROJECTED_YIELD | NUMBER | Factor used to multiply component quantity to obtain required component quantity | ||
| COMMENTS | VARCHAR2 | (240) | Component remarks | |
| QUANTITY_RELATED | NUMBER | Identifier to indicate if this component has quantity related reference designators | ||
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Management to determine how many units of component to put on an order | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill | ||
| MUTUALLY_EXCLUSIVE | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | Flag indicating if this component is to be used when rolling up costs | ||
| CHECK_ATP | NUMBER | Flag indicating if ATP check is required | ||
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to ship | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is displayed on shipping documents | ||
| NEW_EFFECTIVITY_DATE | DATE | Updated value for the effectivity_date | ||
| NEW_OPERATION_SEQUENCE_NUMBER | NUMBER | Updated value for the operation_seq_num | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | From End Item Unit Number | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | To End Item Unit Number | |
| TRANSACTION_TYPE | VARCHAR2 | (10) | Type of action: CREATE, UPDATE or DELETE | |
| RETURN_STATUS | VARCHAR2 | (1) | Return Status | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Delete group name | |
| DG_DESCRIPTION | VARCHAR2 | (240) | Delete group description | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from. |
BOM.BOM_COMP_OPTIONS_TEMP does not reference any database object
BOM.BOM_COMP_OPTIONS_TEMP is referenced by following:
| Description: | Temporary data for ATO configurator window |
|---|
This table contains temporary copies of rows in BOM_EXPLOSIONS. This
is so the Configurator window can perform updates on exploded bills of
material without effecting pre-explosions.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CONFIG_EXPLOSIONS_N1 | NONUNIQUE | APPS_TS_TX_IDX | GROUP_ID |
| BOM_CONFIG_EXPLOSIONS_N2 | NONUNIQUE | APPS_TS_TX_IDX | SESSION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TOP_BILL_SEQUENCE_ID | NUMBER | Y | Top Bill Sequence Identifier | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| EXPLOSION_TYPE | VARCHAR2 | (20) | Y | Optional, Included or All components |
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| PLAN_LEVEL | NUMBER | Y | Level in bill | |
| EXTENDED_QUANTITY | NUMBER | Extended quantity including quantity per, yield, and shrinkage | ||
| SORT_ORDER | VARCHAR2 | (2000) | Y | Sorting sequence for the explosion |
| CREATION_DATE | DATE | Who column | ||
| CREATED_BY | NUMBER | Who Column | ||
| LAST_UPDATE_DATE | DATE | Who column | ||
| LAST_UPDATED_BY | NUMBER | Who column | ||
| GROUP_ID | NUMBER | Explosion identifier | ||
| SESSION_ID | NUMBER | Session identifier | ||
| SELECT_FLAG | VARCHAR2 | (1) | Whether this component has been ordered | |
| SELECT_QUANTITY | NUMBER | Order quantity | ||
| TOP_ITEM_ID | NUMBER | Item identifier of level 0 item | ||
| CONTEXT | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SYSTEM_ID | NUMBER | System-generated identifier of order header | ||
| HEADER_ID | NUMBER | System-generated identifier of order header | ||
| LINE_ID | NUMBER | System-generated identifier of order, configuration or shipment schedule line | ||
| ITEM_SVRID | NUMBER | System-generated identifier of order header | ||
| LIST_PRICE | NUMBER | The price of the item on the price list | ||
| SELLING_PRICE | NUMBER | Actual price charged to customer | ||
| COMPONENT_QUANTITY | NUMBER | Quantity of component in bill of material | ||
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Entry to determine how many units of component to put on an order | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill of material | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| CHECK_ATP | NUMBER | Flag indicating if ATP check is required | ||
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to ship | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is included on shipping documents | ||
| INCLUDE_ON_BILL_DOCS | NUMBER | Flag indicating if component is included on billing documents | ||
| LOW_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| HIGH_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| PICK_COMPONENTS | NUMBER | (not currently used) | ||
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | Unit of measure code of component | |
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (25) | Unit of measure of component | |
| BASE_ITEM_ID | NUMBER | Base item identifier | ||
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | Flag indicating whether item may have components requiring ATP check | |
| ATP_FLAG | VARCHAR2 | (1) | Flag indicating ATP must be checked when item is ordered | |
| BOM_ITEM_TYPE | NUMBER | Type of item | ||
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | Flag indicating all shippable components of should be picked | |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | Assemble to order flag | |
| SHIPPABLE_ITEM_FLAG | VARCHAR2 | (1) | Flag indicating shippable item | |
| CUSTOMER_ORDER_FLAG | VARCHAR2 | (1) | Flag indicating customer orderable item | |
| INTERNAL_ORDER_FLAG | VARCHAR2 | (1) | Flag indicating internally orderable item | |
| CUSTOMER_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | Flag indicating item is customer orderable | |
| INTERNAL_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | Flag indicating item is internally orderable | |
| SO_TRANSACTIONS_FLAG | VARCHAR2 | (1) | Sales order transactions flag | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ASSEMBLY_ITEM_ID | NUMBER | Assembly item identifier | ||
| CONFIGURATOR_FLAG | VARCHAR2 | (1) | Flag indicating if component is used by the configurator form | |
| PRICE_LIST_ID | NUMBER | System-generated identifier of price list | ||
| ROUNDING_FACTOR | NUMBER | Rounding factor used to determine order quantity | ||
| PRICING_CONTEXT | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| PRICING_ATTRIBUTE1 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE2 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE3 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE4 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE5 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE6 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE7 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE8 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE9 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE10 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE11 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE12 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE13 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE14 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE15 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| COMPONENT_CODE | VARCHAR2 | (1000) | Concatenation of component item identifiers | |
| LOOP_FLAG | NUMBER | Indicates whether a loop is detected | ||
| PARENT_BOM_ITEM_TYPE | NUMBER | Parent item's bom item type | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| ITEM_NUM | NUMBER | Item unit cost | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| DISABLE_DATE | DATE | Disable date | ||
| IMPLEMENTATION_DATE | DATE | Date on which engineering change order was implemented | ||
| REXPLODE_FLAG | NUMBER | Flag indicating whether to re-explode | ||
| COMMON_BILL_SEQUENCE_ID | NUMBER | Common bill of material unique identifier | ||
| COMP_BILL_SEQ_ID | NUMBER | Bill Sequence identifier of component | ||
| COMP_COMMON_BILL_SEQ_ID | NUMBER | Common bill sequence id of component | ||
| NUM_COL1 | NUMBER | Updatable column for Configurator | ||
| NUM_COL2 | NUMBER | Updatable column for Configurator | ||
| NUM_COL3 | NUMBER | Updatable column for Configurator | ||
| DATE_COL1 | DATE | Updatable column for Configurator | ||
| DATE_COL2 | DATE | Updatable column for Configurator | ||
| DATE_COL3 | DATE | Updatable column for Configurator | ||
| CHAR_COL1 | VARCHAR2 | (80) | Updatable column for Configurator | |
| CHAR_COL2 | VARCHAR2 | (80) | Updatable column for Configurator | |
| CHAR_COL3 | VARCHAR2 | (80) | Updatable column for Configurator | |
| PREVIOUS_SELECTED_QTY | NUMBER | This column is no longer used. | ||
| AUTO_SELECTED_QUANTITY | NUMBER | This column is no longer used. | ||
| SELECTED_LINE_ID | NUMBER | This column is no longer used. | ||
| CONFIG_HEADER_ID | NUMBER | This column is no longer used. | ||
| CONFIG_REV_NBR | NUMBER | This column is no longer used. |
BOM.BOM_CONFIG_EXPLOSIONS does not reference any database object
BOM.BOM_CONFIG_EXPLOSIONS is referenced by following:
| Description: | List of Organization to which the source structure is getting copied |
|---|
Holds the list of organization ids to which the source structure will get copied.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_COPY_ORGANIZATION_LIST_U1 | UNIQUE | APPS_TS_TX_IDX |
COPY_REQUEST_ID
ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COPY_REQUEST_ID | NUMBER | Y | Copy Request Id of the copy operation | |
| ORGANIZATION_ID | NUMBER | Y | Organization Id of the organization to which the source structure needs to be copied | |
| COMMON_STRUCTURE | VARCHAR2 | (1) | Y | Flag which specifies whether common structure needs to be created. |
| EFFECTIVITY_DATE | DATE | Y | Effectvity Date of the target structure Components | |
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | Effectivity Unit Number for target unit effective structures | |
| FROM_END_ITEM_REV_ID | NUMBER | From End Item Rev Id for End Item Revision Effective components | ||
| ASSEMBLY_TYPE | NUMBER | Y | Target structure's assembly type in this organization | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Request Identifier | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Request Column | ||
| PROGRAM_ID | NUMBER | Standard Request Column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Request Column |
BOM.BOM_COPY_ORGANIZATION_LIST does not reference any database object
BOM.BOM_COPY_ORGANIZATION_LIST is referenced by following:
| Description: |
|---|
BOM_COPY_STRUCTURE_ACTIONS stores action information that need to be performed while coping the structure.These are transaction tables. Used for Multi Org copy. Records in the table is identified by COPY_REQUEST_ID, ORGANIZATION_ID and COMPONENT_SEQUENCE_ID.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_COPY_STRUCTURE_ACTIONS_U1 | UNIQUE | APPS_TS_TX_IDX |
COPY_REQUEST_ID
ORGANIZATION_ID COMPONENT_SEQUENCE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COPY_REQUEST_ID | NUMBER | Y | Copy Request Id of the copy operation | |
| ORGANIZATION_ID | NUMBER | Y | Copy Request Id of the copy operation | |
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component Sequence Id of the component for which the exception action needs to be taken | |
| COMPONENT_EXCEPTION_ACTION | NUMBER | Y | Component Exception which needs to be taken for the component | |
| STRUCTURE_EXCEPTION_ACTION | NUMBER | Y | Structure Exception which needs to be taken for the component if it is a sub-assembly | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Standard Request Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Request Column | ||
| PROGRAM_ID | NUMBER | Standard Request Column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Request Column |
BOM.BOM_COPY_STRUCTURE_ACTIONS does not reference any database object
BOM.BOM_COPY_STRUCTURE_ACTIONS is referenced by following:
| Description: |
|---|
BOM_COPY_STRUCTURE_REQUEST stores the extra information for FND Concurrent requests. These are transaction tables. Used for Multi Org copy. Records in the table is identified by COPY_REQUEST_ID.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_COPY_STRUCTURE_REQUEST_U1 | UNIQUE | APPS_TS_TX_IDX | COPY_REQUEST_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COPY_REQUEST_ID | NUMBER | Y | Unique Identifier of the copy request | |
| SRC_ORG_ID | NUMBER | Y | Source Structure's Organization Id | |
| SRC_ITEM_ID | NUMBER | Y | Source Structure's Item Id | |
| SRC_ITEM_REV_ID | NUMBER | Y | Source Structure's Item Revision Id | |
| SRC_STRUCTURE_NAME | VARCHAR2 | (10) | Source Structure's structure name | |
| SRC_EXPLOSION_DATE | DATE | Y | Explosion Date for the source structure | |
| SRC_FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | End Item Unit Number for the source structure to filter the components | |
| SRC_TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | End Item Unit Number for the source structure to filter the components | |
| SRC_FROM_END_ITEM_REV_ID | NUMBER | End Item Revision for the source structure to filter the components | ||
| SRC_FROM_END_ITEM_MNR_REV_ID | NUMBER | End Item Minor Revision for the source structure to filter the components | ||
| SRC_TO_END_ITEM_REV_ID | NUMBER | End Item Revision for the source structure to filter the components | ||
| SRC_TO_END_ITEM_MNR_REV_ID | NUMBER | End Item Minor Revision for the source structure to filter the components | ||
| SRC_FILTER | NUMBER | Y | Effectivity Filter for source structure | |
| SRC_ECO_FILTER | VARCHAR2 | (10) | ECO Filter for source structure | |
| SRC_BILL_SEQUENCE_ID | NUMBER | Y | Bill Sequence Id of the source structure | |
| SRC_STRUCTURE_TYPE_ID | NUMBER | Y | Structure Typd Id of the source structure | |
| SRC_EFFECTIVITY_CONTROL | NUMBER | Y | Effectivity Control of the source structure | |
| TRGT_ORG_ID | NUMBER | Y | Target Structure's organization id | |
| TRGT_ITEM_ID | NUMBER | Y | Target Structure's Item Id | |
| TRGT_ITEM_REV_ID | NUMBER | Y | Target Structure's Item Revision Id | |
| TRGT_STRUCTURE_NAME | VARCHAR2 | (10) | Target Structure's structure name | |
| TRGT_EFFECTIVITY_DATE | DATE | Y | Target structure's effectivity date for component | |
| TRGT_FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | Target structure's end item unit number for components | |
| TRGT_TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | Target structure's end item unit number for components | |
| TRGT_FROM_END_ITEM_REV_ID | NUMBER | Target structure's end item revision for components | ||
| TRGT_FROM_END_ITEM_MNR_REV_ID | NUMBER | Target structure's end item minor revision for components | ||
| TRGT_TO_END_ITEM_REV_ID | NUMBER | Target structure's end item revision for components | ||
| TRGT_TO_END_ITEM_MNR_REV_ID | NUMBER | Target structure's end item revision for components | ||
| TRGT_BILL_SEQUENCE_ID | NUMBER | Target structure's bill sequence id | ||
| TRGT_STRUCTURE_TYPE_ID | NUMBER | Y | Target structure's structure type id | |
| TRGT_EFFECTIVITY_CONTROL | NUMBER | Y | Target structure's effectivity control | |
| TRGT_STRUCTURE_DESCRIPTION | VARCHAR2 | (240) | Target Structure's Description | |
| LEVELS_TO_COPY | NUMBER | Y | Number of levels to copy | |
| CPY_EXCLUSIONS | VARCHAR2 | (1) | Y | Flag to specify whether exclusions needs to be copied or not |
| CPY_ROUTINGS | VARCHAR2 | (1) | Y | Flag to specify whether routings needs to be copied or not |
| CPY_STRUCTURE_ATTRIBUTES | VARCHAR2 | (1) | Y | Flag to specify whether structure attributes needs to be copied or not |
| CPY_COMPONENT_ATTRIBUTES | VARCHAR2 | (1) | Y | Flag to specify whether component attributes needs to be copied or not |
| CPY_STRUCTURE_ATTACHMENTS | VARCHAR2 | (1) | Y | Flag to specify whether structure attachments needs to be copied or not |
| CPY_REFERENCE_DESIGNATORS | VARCHAR2 | (1) | Y | Flag to specify whether reference designators needs to be copied or not |
| CPY_SUBSTITUTE_COMPONENTS | VARCHAR2 | (1) | Y | Flag to specify whether substitute components needs to be copied or not |
| CPY_COMPONENT_OPERATIONS | VARCHAR2 | (1) | Y | Flag to specify whether component operations needs to be copied or not |
| REQUEST_STATUS | VARCHAR2 | (1) | Y | Copy Request Status |
| ORG_HIERARCHY_NAME | VARCHAR2 | (240) | Organization Hierarchy Name for the copy criteria. | |
| ORG_HIERARCHY_ID | NUMBER | Organization Hierarchy Id of the copy criteria. | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Copy Operation will create change notice with this name. | |
| CHANGE_ID | NUMBER | Change Id of the Change Order to which the revised items of this copy operation will be added. | ||
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Standard Request Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Request Column | ||
| PROGRAM_ID | NUMBER | Standard Request Column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Request Column |
BOM.BOM_COPY_STRUCTURE_REQUEST does not reference any database object
BOM.BOM_COPY_STRUCTURE_REQUEST is referenced by following:
| Description: |
|---|
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CTO_MLSUPPLY_MAIN_TEMP_U1 | NONUNIQUE |
ORDER_LINE_ID
ITEM_INDEX |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORDER_LINE_ID | NUMBER | |||
| ITEM_INDEX | NUMBER | |||
| ITEM_ID | NUMBER | |||
| ITEM_NAME | VARCHAR2 | (40) | ||
| ITEM_QUANTITY | NUMBER | |||
| NEEDED_ITEM_QTY | NUMBER | |||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | |||
| CFM_ROUTING_FLAG | NUMBER | |||
| ROUTING_SEQUENCE_ID | NUMBER | |||
| FIXED_LEAD_TIME | NUMBER | |||
| VARIABLE_LEAD_TIME | NUMBER | |||
| PROCESSING_LEAD_TIME | NUMBER | |||
| POSTPROCESSING_LEAD_TIME | NUMBER | |||
| BOM_ITEM_TYPE | NUMBER | |||
| AUTO_CONFIG_FLAG | VARCHAR2 | (1) | ||
| PARENT_INDEX | NUMBER | |||
| JOB_START_DATE | DATE | |||
| JOB_COMPLETION_DATE | DATE | |||
| LINE_ID | NUMBER | |||
| LINE_CODE | VARCHAR2 | (10) | ||
| SOURCE_TYPE | NUMBER | |||
| JOB_NAME | VARCHAR2 | (240) | ||
| FEEDER_SYNC | VARCHAR2 | (1) | ||
| FLOW_START_INDEX | NUMBER | |||
| FLOW_END_INDEX | NUMBER | |||
| COMMENTS | VARCHAR2 | (200) | ||
| WIP_SUPPLY_TYPE | NUMBER | |||
| OPERATION_SEQ_NUM | NUMBER | |||
| ACTUAL_PARENT_INDEX | NUMBER |
BOM.BOM_CTO_MLSUPPLY_MAIN_TEMP does not reference any database object
BOM.BOM_CTO_MLSUPPLY_MAIN_TEMP is referenced by following:
| Description: | BOM_CTO_MODEL_ORGS |
|---|
BOM_CTO_MODEL_ORGS
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CTO_MODEL_ORGS_U1 | UNIQUE | APPS_TS_TX_IDX | REFERENCE_ID |
| BOM_CTO_MODEL_ORGS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
GROUP_REFERENCE_ID
REFERENCE_ID |
| BOM_CTO_MODEL_ORGS_N2 | NONUNIQUE | APPS_TS_TX_IDX | CONFIG_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| REFERENCE_ID | NUMBER | (10) | Y | reference id |
| GROUP_REFERENCE_ID | NUMBER | (10) | Y | group reference id |
| CONFIG_ITEM_ID | NUMBER | (20) | CONFIG ITEM ID | |
| COST_ROLLUP | VARCHAR2 | (1) | Cost Rollup | |
| CREATE_BOM | VARCHAR2 | (1) | Create Bom | |
| CREATE_SRC_RULES | VARCHAR2 | (1) | Create Src Rules | |
| MODEL_ITEM_ID | NUMBER | (20) | Model Item Id | |
| ORGANIZATION_ID | NUMBER | (10) | Organization Id | |
| ORGANIZATION_TYPE | NUMBER | (10) | Organization Type | |
| RANK | NUMBER | (10) | Rank | |
| RCV_ORG_ID | NUMBER | (10) | Rcv Org Id | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column |
BOM.BOM_CTO_MODEL_ORGS does not reference any database object
BOM.BOM_CTO_MODEL_ORGS is referenced by following:
| Description: | BCOD |
|---|
BOM_CTO_ORDER_DEMAND stores the demand information for ATO model, Option class and Option item. It stores the demand only for Mulit level/Multi org ATO models. It also stores the demand of Multi org ATO items.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CTO_ORDER_DEMAND_U1 | UNIQUE | APPS_TS_TX_IDX | BCOD_LINE_ID |
| BOM_CTO_ORDER_DEMAND_N1 | NONUNIQUE | APPS_TS_TX_IDX | OE_LINE_ID |
| BOM_CTO_ORDER_DEMAND_N2 | NONUNIQUE | APPS_TS_TX_IDX | ATO_LINE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| BCOD_LINE_ID | NUMBER | (10) | Y | Bom cto order demand Line Identifier |
| OE_LINE_ID | NUMBER | (10) | Y | OE_Order_lines_all line identifier |
| ATO_LINE_ID | NUMBER | (10) | Y | ATO_LINE_ID |
| INVENTORY_ITEM_ID | NUMBER | Y | INVENTORY Item Identifier | |
| ORGANIZATION_ID | NUMBER | (10) | Y | ORGANIZATION_ID |
| REQUIRED_DATE | DATE | Y | REQUIRED_DATE | |
| REQUIRED_QTY | NUMBER | (10) | Y | REQUIRED_QTY |
| ORDER_QUANTITY_UOM | VARCHAR2 | (3) | ORDER_QUANTITY_UOM | |
| HEADER_ID | NUMBER | Y | HEADER_ID | |
| PARENT_DEMAND_TYPE | NUMBER | (1) | PARENT_DEMAND_TYPE | |
| FORECAST_VISIBLE | VARCHAR2 | (1) | Y | FORECAST VISIBLE Flag |
| DEMAND_VISIBLE | VARCHAR2 | (1) | Y | DEMAND_VISIBLE Flag |
| CREATED_BY | NUMBER | Y | CREATED_BY | |
| LAST_UPDATED_BY | NUMBER | Y | LAST_UPDATE_BY | |
| LAST_UPDATED_DATE | DATE | Y | LAST_UPDATED_DATE | |
| LAST_UPDATE_LOGIN | NUMBER | LAST_UPDATE_LOGIN | ||
| PROGRAM_APPLICATION_ID | NUMBER | PROGRAM_APPLICATION_ID | ||
| PROGRAM_UPDATE_DATE | DATE | PROGRAM_UPDATE_DATE |
BOM.BOM_CTO_ORDER_DEMAND does not reference any database object
BOM.BOM_CTO_ORDER_DEMAND is referenced by following:
| Description: | bom cto order lines |
|---|
bom cto order lines
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CTO_ORDER_LINES_U1 | UNIQUE | APPS_TS_TX_IDX | LINE_ID |
| BOM_CTO_ORDER_LINES_N1 | NONUNIQUE | APPS_TS_TX_IDX | TOP_MODEL_LINE_ID |
| BOM_CTO_ORDER_LINES_N2 | NONUNIQUE | APPS_TS_TX_IDX | PARENT_ATO_LINE_ID |
| BOM_CTO_ORDER_LINES_N3 | NONUNIQUE | APPS_TS_TX_IDX | ATO_LINE_ID |
| BOM_CTO_ORDER_LINES_N4 | NONUNIQUE | APPS_TS_TX_IDX |
LINK_TO_LINE_ID
LINE_ID |
| BOM_CTO_ORDER_LINES_N5 | NONUNIQUE | APPS_TS_TX_IDX | CONFIG_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ATO_LINE_ID | NUMBER | (10) | ATO_LINE_ID | |
| BATCH_ID | VARCHAR2 | (30) | BATCH_ID | |
| BOM_ITEM_TYPE | VARCHAR2 | (30) | BOM_ITEM_TYPE | |
| COMPONENT_CODE | VARCHAR2 | (1000) | COMPONENT_CODE | |
| COMPONENT_SEQUENCE_ID | NUMBER | COMPONENT_SEQUENCE_ID | ||
| CONFIG_ITEM_ID | NUMBER | (20) | CONFIG_ITEM_ID | |
| INVENTORY_ITEM_ID | NUMBER | (20) | INVENTORY_ITEM_ID | |
| ITEM_TYPE_CODE | VARCHAR2 | (30) | ITEM_TYPE_CODE | |
| LINE_ID | NUMBER | (10) | Y | LINE_ID |
| LINK_TO_LINE_ID | NUMBER | (10) | LINK_TO_LINE_ID | |
| ORDERED_QUANTITY | NUMBER | ORDERED_QUANTITY | ||
| ORDER_QUANTITY_UOM | VARCHAR2 | (3) | ORDER_QUANTITY_UOM | |
| PARENT_ATO_LINE_ID | NUMBER | (10) | PARENT_ATO_LINE_ID | |
| PERFORM_MATCH | VARCHAR2 | (1) | PERFORM_MATCH | |
| PLAN_LEVEL | NUMBER | PLAN_LEVEL | ||
| SCHEDULE_SHIP_DATE | DATE | SCHEDULE_SHIP_DATE | ||
| SHIP_FROM_ORG_ID | NUMBER | (10) | SHIP_FROM_ORG_ID | |
| TOP_MODEL_LINE_ID | NUMBER | (10) | Y | TOP_MODEL_LINE_ID |
| WIP_SUPPLY_TYPE | VARCHAR2 | (30) | WIP_SUPPLY_TYPE | |
| HEADER_ID | NUMBER | (10) | Y | HEADER_ID |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| REUSE_CONFIG | VARCHAR2 | (1) | Reuse Config Flag | |
| OPTION_SPECIFIC | VARCHAR2 | (1) | Option Specific Flag | |
| QTY_PER_PARENT_MODEL | NUMBER | Qty Per parent model | ||
| CONFIG_CREATION | VARCHAR2 | (30) | config creation attribute |
BOM.BOM_CTO_ORDER_LINES does not reference any database object
BOM.BOM_CTO_ORDER_LINES is referenced by following:
| Description: | bom cto order lines |
|---|
bom cto order lines
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CTO_ORDER_LINES_UPG_U1 | UNIQUE | APPS_TS_TX_IDX | LINE_ID |
| BOM_CTO_ORDER_LINES_UPG_N1 | NONUNIQUE | APPS_TS_TX_IDX | CONFIG_ITEM_ID |
| BOM_CTO_ORDER_LINES_UPG_N2 | NONUNIQUE | APPS_TS_TX_IDX |
STATUS
CONFIG_ITEM_ID |
| BOM_CTO_ORDER_LINES_UPG_N3 | NONUNIQUE | APPS_TS_TX_IDX |
STATUS
LINE_ID INVENTORY_ITEM_ID CONFIG_ITEM_ID |
| BOM_CTO_ORDER_LINES_UPG_N4 | NONUNIQUE | APPS_TS_TX_IDX | ATO_LINE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ATO_LINE_ID | NUMBER | (10) | ATO_LINE_ID | |
| BATCH_ID | VARCHAR2 | (30) | BATCH_ID | |
| BOM_ITEM_TYPE | VARCHAR2 | (30) | BOM_ITEM_TYPE | |
| COMPONENT_CODE | VARCHAR2 | (1000) | COMPONENT_CODE | |
| COMPONENT_SEQUENCE_ID | NUMBER | COMPONENT_SEQUENCE_ID | ||
| CONFIG_ITEM_ID | NUMBER | (20) | CONFIG_ITEM_ID | |
| INVENTORY_ITEM_ID | NUMBER | (20) | INVENTORY_ITEM_ID | |
| ITEM_TYPE_CODE | VARCHAR2 | (30) | ITEM_TYPE_CODE | |
| LINE_ID | NUMBER | (10) | Y | LINE_ID |
| LINK_TO_LINE_ID | NUMBER | (10) | LINK_TO_LINE_ID | |
| ORDERED_QUANTITY | NUMBER | ORDERED_QUANTITY | ||
| ORDER_QUANTITY_UOM | VARCHAR2 | (3) | ORDER_QUANTITY_UOM | |
| PARENT_ATO_LINE_ID | NUMBER | (10) | PARENT_ATO_LINE_ID | |
| PERFORM_MATCH | VARCHAR2 | (1) | PERFORM_MATCH | |
| PLAN_LEVEL | NUMBER | PLAN_LEVEL | ||
| SCHEDULE_SHIP_DATE | DATE | SCHEDULE_SHIP_DATE | ||
| SHIP_FROM_ORG_ID | NUMBER | (10) | SHIP_FROM_ORG_ID | |
| TOP_MODEL_LINE_ID | NUMBER | (10) | Y | TOP_MODEL_LINE_ID |
| WIP_SUPPLY_TYPE | VARCHAR2 | (30) | WIP_SUPPLY_TYPE | |
| HEADER_ID | NUMBER | (10) | Y | HEADER_ID |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| REUSE_CONFIG | VARCHAR2 | (1) | Resuse Config Flag | |
| OPTION_SPECIFIC | VARCHAR2 | (1) | Option Specific Flag | |
| QTY_PER_PARENT_MODEL | NUMBER | Qty Per Parent Model | ||
| CONFIG_CREATION | VARCHAR2 | (30) | Config Creation Attribute | |
| SEQUENCE | NUMBER | (10) | Sequence | |
| STATUS | VARCHAR2 | (30) | Status |
BOM.BOM_CTO_ORDER_LINES_UPG does not reference any database object
BOM.BOM_CTO_ORDER_LINES_UPG is referenced by following:
| Description: | OSS Component Definition |
|---|
OSS Component Definition
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CTO_OSS_COMPONENTS_U1 | UNIQUE | APPS_TS_TX_IDX | OSS_COMP_SEQ_ID |
| BOM_CTO_OSS_COMPONENTS_U2 | UNIQUE | APPS_TS_TX_IDX |
MODEL_ITEM_ID
OPTION_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Attribute Category | |
| ATTRIBUTE1 | VARCHAR2 | (15) | Attribute1 | |
| ATTRIBUTE9 | VARCHAR2 | (15) | Attribute9 | |
| ATTRIBUTE3 | VARCHAR2 | (15) | Attribute3 | |
| ATTRIBUTE15 | VARCHAR2 | (15) | Attribute15 | |
| ATTRIBUTE14 | VARCHAR2 | (15) | Attribute14 | |
| ATTRIBUTE13 | VARCHAR2 | (15) | Attribute13 | |
| ATTRIBUTE12 | VARCHAR2 | (15) | Attribute12 | |
| ATTRIBUTE11 | VARCHAR2 | (15) | Attribute11 | |
| ATTRIBUTE10 | VARCHAR2 | (15) | Attribute10 | |
| ATTRIBUTE8 | VARCHAR2 | (15) | Attribute8 | |
| ATTRIBUTE7 | VARCHAR2 | (15) | Attribute7 | |
| ATTRIBUTE6 | VARCHAR2 | (15) | Attribute6 | |
| ATTRIBUTE4 | VARCHAR2 | (15) | Attribute4 | |
| ATTRIBUTE5 | VARCHAR2 | (15) | Attribute5 | |
| ATTRIBUTE2 | VARCHAR2 | (15) | Attribute2 | |
| OSS_COMP_SEQ_ID | NUMBER | Y | Component Sequence Id | |
| MODEL_ITEM_ID | NUMBER | Y | Model Item Id | |
| OPTION_ITEM_ID | NUMBER | Y | Option Item Id | |
| LAST_UPDATE_DATE | DATE | Standard Who Column | ||
| LAST_UPDATE_BY | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Standard Who Column | ||
| CREATED_BY | NUMBER | Standard Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who Column |
BOM.BOM_CTO_OSS_COMPONENTS does not reference any database object
BOM.BOM_CTO_OSS_COMPONENTS is referenced by following:
| Description: | OSS Org List |
|---|
OSS Org List
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CTO_OSS_ORGS_LIST_U1 | UNIQUE | APPS_TS_TX_IDX | OSS_LIST_SEQ_ID |
| BOM_CTO_OSS_ORGS_LIST_N1 | NONUNIQUE | APPS_TS_TX_IDX | OSS_COMP_SEQ_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OSS_LIST_SEQ_ID | NUMBER | Y | OSS List Sequence Id | |
| OSS_COMP_SEQ_ID | NUMBER | Y | OSS Component Sequence Id | |
| ORGANIZATION_ID | NUMBER | Organization Id | ||
| VENDOR_ID | NUMBER | Vendor Id | ||
| VENDOR_SITE_CODE | VARCHAR2 | (30) | Vendor Site Code | |
| LAST_UPDATE_DATE | DATE | Standard Who Column | ||
| LAST_UPDATE_BY | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Standard Who Column | ||
| CREATED_BY | NUMBER | Standard Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who Column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | DFF Attribute Category | |
| ATTRIBUTE1 | VARCHAR2 | (15) | DFF Attribute Column | |
| ATTRIBUTE2 | VARCHAR2 | (15) | DFF Attribute Column | |
| ATTRIBUTE3 | VARCHAR2 | (15) | DFF Attribute Column | |
| ATTRIBUTE4 | VARCHAR2 | (15) | DFF Attribute Column | |
| ATTRIBUTE5 | VARCHAR2 | (15) | DFF Attribute Column | |
| ATTRIBUTE6 | VARCHAR2 | (15) | DFF Attribute Column | |
| ATTRIBUTE7 | VARCHAR2 | (15) | DFF Attribute Column | |
| ATTRIBUTE8 | VARCHAR2 | (15) | DFF Attribute Column | |
| ATTRIBUTE9 | VARCHAR2 | (15) | DFF Attribute Column | |
| ATTRIBUTE10 | VARCHAR2 | (15) | DFF Attribute Column | |
| ATTRIBUTE11 | VARCHAR2 | (15) | DFF Attribute Column | |
| ATTRIBUTE12 | VARCHAR2 | (15) | DFF Attribute Column | |
| ATTRIBUTE13 | VARCHAR2 | (15) | DFF Attribute Column | |
| ATTRIBUTE14 | VARCHAR2 | (15) | DFF Attribute Column | |
| ATTRIBUTE15 | VARCHAR2 | (15) | DFF Attribute Column |
BOM.BOM_CTO_OSS_ORGS_LIST does not reference any database object
BOM.BOM_CTO_OSS_ORGS_LIST is referenced by following:
| Description: | BOM_CTO_SRC_ORGS_B |
|---|
BOM_CTO_SRC_ORGS_B
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_CTO_SRC_ORGS_B_U1 | UNIQUE | APPS_TS_TX_IDX |
LINE_ID
ORGANIZATION_ID RCV_ORG_ID ORGANIZATION_TYPE |
| BOM_CTO_SRC_ORGS_B_N1 | NONUNIQUE | APPS_TS_TX_IDX |
LINE_ID
MODEL_ITEM_ID ORGANIZATION_ID |
| BOM_CTO_SRC_ORGS_B_N2 | NONUNIQUE | APPS_TS_TX_IDX | TOP_MODEL_LINE_ID |
| BOM_CTO_SRC_ORGS_B_N3 | NONUNIQUE | APPS_TS_TX_IDX | CONFIG_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CONFIG_ITEM_ID | NUMBER | (20) | CONFIG_ITEM_ID | |
| COST_ROLLUP | VARCHAR2 | (1) | COST_ROLLUP | |
| CREATE_BOM | VARCHAR2 | (1) | CREATE_BOM | |
| CREATE_SRC_RULES | VARCHAR2 | (1) | CREATE_SRC_RULES | |
| LINE_ID | NUMBER | (10) | Y | LINE_ID |
| MODEL_ITEM_ID | NUMBER | (20) | MODEL_ITEM_ID | |
| ORGANIZATION_ID | NUMBER | (10) | Y | ORGANIZATION_ID |
| ORGANIZATION_TYPE | NUMBER | (10) | ORGANIZATION_TYPE | |
| RANK | NUMBER | (10) | RANK | |
| RCV_ORG_ID | NUMBER | (10) | RCV_ORG_ID | |
| TOP_MODEL_LINE_ID | NUMBER | (10) | Y | TOP_MODEL_LINE_ID |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| GROUP_REFERENCE_ID | NUMBER | (10) | Group Reference Id |
BOM.BOM_CTO_SRC_ORGS_B does not reference any database object
BOM.BOM_CTO_SRC_ORGS_B is referenced by following:
| Description: | Deleted entities in BOM and INV |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_DELETE_ENTITIES.DELETE_GROUP_SEQUENCE_ID | BOM_DELETE_GROUPS |
| BOM_DELETE_ENTITIES.BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
| BOM_DELETE_ENTITIES.ROUTING_SEQUENCE_ID | BOM_OPERATIONAL_ROUTINGS |
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_DELETE_ERRORS.DELETE_ENTITY_SEQUENCE_ID | BOM_DELETE_ENTITIES |
| BOM_DELETE_SUB_ENTITIES.DELETE_ENTITY_SEQUENCE_ID | BOM_DELETE_ENTITIES |
BOM_DELETE_ENTITIES stores information about items, bills, or routings
you choose to delete in your delete group.
.
Oracle Bills of Material stores the item number and description of the
item you delete in ITEM_CONCAT_SEGMENTS and ITEM_DESCRIPTION. These
values are stored to report and query on if you delete the item.
.
PRIOR_PROCESS_FLAG stores whether the row originates from the user or
is automatically created by Oracle Bills of Material. If a user
entered the row, the Delete Item User-exit process does not affect the
row.
.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_DELETE_ENTITIES_U1 | UNIQUE | APPS_TS_TX_IDX | DELETE_ENTITY_SEQUENCE_ID |
| BOM_DELETE_ENTITIES_N1 | NONUNIQUE | APPS_TS_TX_IDX | DELETE_GROUP_SEQUENCE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DELETE_ENTITY_SEQUENCE_ID | NUMBER | Y | Delete entity unique identifier | |
| DELETE_GROUP_SEQUENCE_ID | NUMBER | Y | Delete group unique identifier | |
| DELETE_ENTITY_TYPE | NUMBER | Type of delete entity | ||
| BILL_SEQUENCE_ID | NUMBER | Bill of material unique identifier | ||
| ROUTING_SEQUENCE_ID | NUMBER | Routing unique identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Item unique identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate designator of bom or routing being deleted | |
| ITEM_DESCRIPTION | VARCHAR2 | (240) | Item description | |
| ITEM_CONCAT_SEGMENTS | VARCHAR2 | (240) | Y | Item concatenated key flexfield segments |
| DELETE_STATUS_TYPE | NUMBER | Delete entity status | ||
| DELETE_DATE | DATE | Date entity was deleted | ||
| PRIOR_PROCESS_FLAG | NUMBER | Y | Indicates whether this row has been exploded into its bill or routings for child organizations | |
| PRIOR_COMMIT_FLAG | NUMBER | Y | Indicates if the row is user entered or loaded automatically | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_DELETE_ENTITIES does not reference any database object
BOM.BOM_DELETE_ENTITIES is referenced by following:
| Description: | Errors occurring when deleting entities |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_DELETE_ERRORS.SQL_STATEMENT_NAME | BOM_DELETE_SQL_STATEMENTS |
| BOM_DELETE_ERRORS.DELETE_ENTITY_SEQUENCE_ID | BOM_DELETE_ENTITIES |
BOM_DELETE_ERRORS stores information about constraints that are
violated for every entity that you try to delete. Oracle Bills of
Material retrieves the translated error message using the message name
associated with every failed constraint.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_DELETE_ERRORS_U1 | UNIQUE | APPS_TS_TX_IDX |
DELETE_ENTITY_SEQUENCE_ID
COMPONENT_SEQUENCE_ID OPERATION_SEQUENCE_ID ERROR_SEQUENCE_NUMBER |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DELETE_ENTITY_SEQUENCE_ID | NUMBER | Y | Delete entity unique identifier | |
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| OPERATION_SEQUENCE_ID | NUMBER | Routing operation unique identifier | ||
| ERROR_SEQUENCE_NUMBER | NUMBER | Y | Error sequence number | |
| SQL_STATEMENT_NAME | VARCHAR2 | (10) | Y | Name of failed sql statement |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_DELETE_ERRORS does not reference any database object
BOM.BOM_DELETE_ERRORS is referenced by following:
| Description: | Delete groups of BOM and INV entities |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_DELETE_ENTITIES.DELETE_GROUP_SEQUENCE_ID | BOM_DELETE_GROUPS |
BOM_DELETE_GROUPS stores header information about the group of
entities you want to delete.
.
You can group items, bills, routings , operations, components, bill
and routings, or items, bills and routings in a single group.
.
.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_DELETE_GROUPS_U1 | UNIQUE | APPS_TS_TX_IDX | DELETE_GROUP_SEQUENCE_ID |
| BOM_DELETE_GROUPS_U2 | UNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
DELETE_GROUP_NAME |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DELETE_GROUP_SEQUENCE_ID | NUMBER | Y | Group unique identifier | |
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Y | Name of the delete group |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| DELETE_TYPE | NUMBER | Y | Type of delete | |
| ACTION_TYPE | NUMBER | Y | Type of action | |
| DATE_LAST_SUBMITTED | DATE | Date the concurrent program was last submitted | ||
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ENGINEERING_FLAG | NUMBER | Y | Whether the delete group is for engineering or manufacturing entities | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| DELETE_COMMON_BILL_FLAG | NUMBER | (1) | Common Bill Flag | |
| DELETE_ORG_TYPE | NUMBER | Organization Type | ||
| ORGANIZATION_HIERARCHY | VARCHAR2 | (30) | Organization Hierarchy Name |
BOM.BOM_DELETE_GROUPS does not reference any database object
BOM.BOM_DELETE_GROUPS is referenced by following:
| Description: | SQL statements used to check and delete entities |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_DELETE_ERRORS.SQL_STATEMENT_NAME | BOM_DELETE_SQL_STATEMENTS |
This table stores information about delete statements and constraints.
Oracle Bills of Material provides you with a pre-defined set of
constraints to maintain data integrity. You should not delete these
constraints. You can add your own constraints using the Define Delete
Constraints (BOMFDCON) window. Oracle Bills of Material also stores
delete sql statements that the Delete program (BMCDEL) uses to purge
data from the database.
.
.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_DELETE_SQL_STATEMENTS_U1 | UNIQUE | APPS_TS_SEED | SQL_STATEMENT_NAME |
| BOM_DELETE_SQL_STATEMENTS_U2 | UNIQUE | APPS_TS_SEED |
SQL_STATEMENT_TYPE
DELETE_ENTITY_TYPE SEQUENCE_NUMBER |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SQL_STATEMENT_NAME | VARCHAR2 | (10) | Y | Name that uniquely identifies a sql statement |
| SQL_STATEMENT_TYPE | NUMBER | Y | Type of sql statement | |
| ACTIVE_FLAG | NUMBER | Y | Indicates whether this sql statement is active | |
| DELETE_ON_SUCCESS_FLAG | NUMBER | For a constraint, indicate whether delete should occur when sql statement succeeds (returns rows) or whether delete should occur when sql statement fails (returns no rows) | ||
| DELETE_ENTITY_TYPE | NUMBER | Y | Type of delete entity | |
| MESSAGE_NAME | VARCHAR2 | (30) | Name of the message to be produced when the sql statement fails | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| SEQUENCE_NUMBER | NUMBER | Y | Number that identifies the sequence in which the constraints or deletes for this delete entity type will execute | |
| ARCHIVE_TABLE_NAME | VARCHAR2 | (32) | For delete statements, name of table to archive deleted rows | |
| PREDEFINED_FLAG | NUMBER | Y | Indicates if constraint is seeded or user defined | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| SQL_STATEMENT | LONG | (0) | Sql statement | |
| PRODUCT_NAME | VARCHAR2 | (30) | Name of the product, in which this delere statement record will be used. Ex: "MFG" or "PLM" |
BOM.BOM_DELETE_SQL_STATEMENTS does not reference any database object
BOM.BOM_DELETE_SQL_STATEMENTS is referenced by following:
| Description: | Component and operations to be deleted |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_DELETE_SUB_ENTITIES.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
| BOM_DELETE_SUB_ENTITIES.OPERATION_SEQUENCE_ID | BOM_OPERATION_SEQUENCES |
| BOM_DELETE_SUB_ENTITIES.DELETE_ENTITY_SEQUENCE_ID | BOM_DELETE_ENTITIES |
BOM_DELETE_SUB_ENTITIES stores information about components and
operations that you select to delete.
.
Oracle Bills of Material stores the concatenated component segments,
to refer to the part number, if you delete the component item.
.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_DELETE_SUB_ENTITIES_U1 | UNIQUE | APPS_TS_TX_IDX |
DELETE_ENTITY_SEQUENCE_ID
COMPONENT_SEQUENCE_ID OPERATION_SEQUENCE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DELETE_ENTITY_SEQUENCE_ID | NUMBER | Y | Delete entity unique identifier | |
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| OPERATION_SEQUENCE_ID | NUMBER | Routing operation unique identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Y | Operation sequence number | |
| EFFECTIVITY_DATE | DATE | Y | Effective date | |
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | From End Item Unit Number | |
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| COMPONENT_CONCAT_SEGMENTS | VARCHAR2 | (240) | Component item concatenated key flexfield segments | |
| ITEM_NUM | NUMBER | Sequence number of the component within the bill | ||
| DISABLE_DATE | DATE | Disable date | ||
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | To End Item Unit Number | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| OPERATION_DEPARTMENT_CODE | VARCHAR2 | (10) | Department in which the operation takes place | |
| DELETE_STATUS_TYPE | NUMBER | Y | Delete status | |
| DELETE_DATE | DATE | Date the sub-entity was deleted | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_DELETE_SUB_ENTITIES does not reference any database object
BOM.BOM_DELETE_SUB_ENTITIES is referenced by following:
| Description: | Departments |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_DEPARTMENTS.ORGANIZATION_ID | MTL_PARAMETERS |
| BOM_DEPARTMENTS.LOCATION_ID | HR_LOCATIONS_ALL |
| Foreign Key Column | Foreign Table |
|---|---|
| AHL_DEPARTMENT_SHIFTS.DEPARTMENT_ID | BOM_DEPARTMENTS |
| AHL_VISITS_B.DEPARTMENT_ID | BOM_DEPARTMENTS |
| AHL_VISIT_TASKS_B.DEPARTMENT_ID | BOM_DEPARTMENTS |
| BOM_DEPARTMENT_RESOURCES.DEPARTMENT_ID | BOM_DEPARTMENTS |
| BOM_OPERATION_SEQUENCES.DEPARTMENT_ID | BOM_DEPARTMENTS |
| BOM_STANDARD_OPERATIONS.DEPARTMENT_ID | BOM_DEPARTMENTS |
| CST_DEPARTMENT_OVERHEADS.DEPARTMENT_ID | BOM_DEPARTMENTS |
| CST_EAM_BALANCE_BY_ACCOUNTS.OWNING_DEPT_ID | BOM_DEPARTMENTS |
| CST_ITEM_COST_DETAILS.DEPARTMENT_ID | BOM_DEPARTMENTS |
| CST_ITEM_CST_DTLS_INTERFACE.DEPARTMENT_ID | BOM_DEPARTMENTS |
| CST_STD_COST_ADJ_DEBUG.DEPARTMENT_ID | BOM_DEPARTMENTS |
| CST_STD_COST_ADJ_TEMP.DEPARTMENT_ID | BOM_DEPARTMENTS |
| CST_STD_COST_ADJ_VALUES.DEPARTMENT_ID | BOM_DEPARTMENTS |
| CS_INCIDENTS_ALL_B.OWNING_DEPARTMENT_ID | BOM_DEPARTMENTS |
| MRP_PLANNED_RESOURCE_REQS.DEPARTMENT_ID | BOM_DEPARTMENTS |
| PJM_DEFAULT_TASKS.DEPARTMENT_ID | BOM_DEPARTMENTS |
| QA_RESULTS.DEPARTMENT_ID | BOM_DEPARTMENTS |
| WIP_COST_TXN_INTERFACE.DEPARTMENT_ID | BOM_DEPARTMENTS |
| WIP_MOVE_TRANSACTIONS.FM_DEPARTMENT_ID | BOM_DEPARTMENTS |
| WIP_MOVE_TRANSACTIONS.TO_DEPARTMENT_ID | BOM_DEPARTMENTS |
| WIP_OPERATIONS.DEPARTMENT_ID | BOM_DEPARTMENTS |
| WIP_REQUIREMENT_OPERATIONS.DEPARTMENT_ID | BOM_DEPARTMENTS |
| WIP_TRANSACTIONS.DEPARTMENT_ID | BOM_DEPARTMENTS |
| WMS_DEPARTMENT_SUBINVENTORIES.DEPARTMENT_ID | BOM_DEPARTMENTS |
| WSM_LOT_MOVE_TXN_INTERFACE.FM_DEPARTMENT_ID | BOM_DEPARTMENTS |
| WSM_LOT_MOVE_TXN_INTERFACE.TO_DEPARTMENT_ID | BOM_DEPARTMENTS |
BOM_DEPARTMENTS stores department information. You cannot
use the department in an operation after its DISABLE_DATE.
DEPARTMENT_ID uniquely identifies each row. You can assign
a delivery location for each department if you use outside
processing resources.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_DEPARTMENTS_U1 | UNIQUE | APPS_TS_TX_IDX | DEPARTMENT_ID |
| BOM_DEPARTMENTS_U2 | UNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
DEPARTMENT_CODE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | Department code |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DISABLE_DATE | DATE | Disable date | ||
| DEPARTMENT_CLASS_CODE | VARCHAR2 | (10) | Department class code | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| LOCATION_ID | NUMBER | Location identifier | ||
| PA_EXPENDITURE_ORG_ID | NUMBER | Organization identifier for the expenditure organization | ||
| SCRAP_ACCOUNT | NUMBER | Scrap account of department | ||
| EST_ABSORPTION_ACCOUNT | NUMBER | Estimated scrap absorption account | ||
| MAINT_COST_CATEGORY | VARCHAR2 | (30) | Maintenance Cost category |
BOM.BOM_DEPARTMENTS does not reference any database object
BOM.BOM_DEPARTMENTS is referenced by following:
| Description: | Department classes |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_DEPARTMENT_CLASSES.ORGANIZATION_ID | MTL_PARAMETERS |
BOM_DEPARTMENT_CLASSES stores information about
department classes which you can use to group departments.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_DEPARTMENT_CLASSES_U1 | UNIQUE | APPS_TS_TX_IDX |
DEPARTMENT_CLASS_CODE
ORGANIZATION_ID |
| BOM_DEPARTMENT_CLASSES_N1 | NONUNIQUE | APPS_TS_TX_IDX | ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_CLASS_CODE | VARCHAR2 | (10) | Y | Department class code |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_DEPARTMENT_CLASSES does not reference any database object
BOM.BOM_DEPARTMENT_CLASSES is referenced by following:
| Description: | Resources associated with departments |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_DEPARTMENT_RESOURCES.DEPARTMENT_ID | BOM_DEPARTMENTS |
| BOM_DEPARTMENT_RESOURCES.RESOURCE_ID | BOM_RESOURCES |
| BOM_DEPARTMENT_RESOURCES.ATP_RULE_ID | MTL_ATP_RULES |
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_DEPT_RES_INSTANCES.DEPARTMENT_ID
BOM_DEPT_RES_INSTANCES.RESOURCE_ID |
BOM_DEPARTMENT_RESOURCES |
|
BOM_RESOURCE_SHIFTS.DEPARTMENT_ID
BOM_RESOURCE_SHIFTS.RESOURCE_ID |
BOM_DEPARTMENT_RESOURCES |
|
CRP_PLANNED_RESOURCES.DEPARTMENT_ID
CRP_PLANNED_RESOURCES.RESOURCE_ID |
BOM_DEPARTMENT_RESOURCES |
|
CRP_RESOURCE_HOURS.DEPARTMENT_ID
CRP_RESOURCE_HOURS.RESOURCE_ID |
BOM_DEPARTMENT_RESOURCES |
|
MRP_WIP_RESOURCES.DEPARTMENT_ID
MRP_WIP_RESOURCES.RESOURCE_ID |
BOM_DEPARTMENT_RESOURCES |
BOM_DEPARTMENT_RESOURCES stores information about resources that
you assign to a department. You then use these resources on routing
operations. You can define multiple resources for a department.
.
SHARE_CAPACITY_FLAG determines if the current department
shares its capacity with other departments. SHARE_FROM_DEPT_ID
indicates the department which shares the capacity shares of
a resource with your department.
.
You can use RESOURCE_GROUP_NAME to group resource assignments to
departments. Oracle Capacity uses this information when performing
resource rollups.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_DEPARTMENT_RESOURCES_U1 | UNIQUE | APPS_TS_TX_IDX |
DEPARTMENT_ID
RESOURCE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| SHARE_CAPACITY_FLAG | NUMBER | Y | Allow sharing of capacity | |
| SHARE_FROM_DEPT_ID | NUMBER | Share capacity from department identifier | ||
| CAPACITY_UNITS | NUMBER | Resource capacity | ||
| RESOURCE_GROUP_NAME | VARCHAR2 | (30) | Resource use category | |
| AVAILABLE_24_HOURS_FLAG | NUMBER | Y | Resource is available 24 hours or by shifts | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| CTP_FLAG | NUMBER | Flag indicating capacity must be checked when resource is ordered | ||
| EXCEPTION_SET_NAME | VARCHAR2 | (10) | Name of the exception set | |
| ATP_RULE_ID | NUMBER | Identifier of the available to promise rule used | ||
| UTILIZATION | NUMBER | Resource Utilization | ||
| EFFICIENCY | NUMBER | Resource Efficiency | ||
| SCHEDULE_TO_INSTANCE | NUMBER | Schedule To Instance | ||
| SEQUENCING_WINDOW | NUMBER | Sequencing Window | ||
| IDLE_TIME_TOLERANCE | NUMBER | Idle Time Tolerance |
BOM.BOM_DEPARTMENT_RESOURCES does not reference any database object
BOM.BOM_DEPARTMENT_RESOURCES is referenced by following:
| Description: | Descriptive elements assigned to model/option bills |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_DEPENDENT_DESC_ELEMENTS.BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
BOM_DEPENDENT_DESC_ELEMENTS stores information about the descriptive
elements assigned to a bill of material. You can only assign
descriptive elements to model and option class bills of material. You
can choose from those defined in MTL_DESCRIPTIVE_ELEMENTS. For model
bills of material, you can only choose descriptive elements that are
in the model item's catalog group.
.
The descriptive elements assigned to a bill of material are used to
assign descriptive element values to configuration items that are
created for model/option sales orders.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_DEPENDENT_DESC_ELEMENTS_U1 | UNIQUE | APPS_TS_TX_IDX |
BILL_SEQUENCE_ID
ELEMENT_NAME |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| ELEMENT_NAME | VARCHAR2 | (30) | Y | Descriptive element name |
| LAST_UPDATE_DATE | DATE | Y | Last update date | |
| LAST_UPDATED_BY | NUMBER | Y | Last updated by | |
| CREATION_DATE | DATE | Y | Creation date | |
| CREATED_BY | NUMBER | Y | Created by | |
| LAST_UPDATE_LOGIN | NUMBER | Last update login | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column |
BOM.BOM_DEPENDENT_DESC_ELEMENTS does not reference any database object
BOM.BOM_DEPENDENT_DESC_ELEMENTS is referenced by following:
| Description: | Descriptive elements assigned to model/option bills |
|---|
Used by Delete Group program to archive deleted descriptive elements
assigned to model/option bills of material.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| ELEMENT_NAME | VARCHAR2 | (30) | Y | Descriptive element name |
| LAST_UPDATE_DATE | DATE | Y | Last update date | |
| LAST_UPDATED_BY | NUMBER | Y | Last updated by | |
| CREATION_DATE | DATE | Y | Creation date | |
| CREATED_BY | NUMBER | Y | Created by | |
| LAST_UPDATE_LOGIN | NUMBER | Last update login | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column |
BOM.BOM_DEPEND_DESC_ELEM_ARCHIVE does not reference any database object
BOM.BOM_DEPEND_DESC_ELEM_ARCHIVE is referenced by following:
| Description: | Department Resource Instances |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_DEPT_RES_INSTANCES.DEPARTMENT_ID
BOM_DEPT_RES_INSTANCES.RESOURCE_ID |
BOM_DEPARTMENT_RESOURCES |
BOM_DEPT_RES_INSTANCES stores department resource instances information.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_DEPT_RES_INSTANCES_U1 | UNIQUE | APPS_TS_TX_IDX |
INSTANCE_ID
DEPARTMENT_ID RESOURCE_ID SERIAL_NUMBER |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INSTANCE_ID | NUMBER | Y | Instance Identifier | |
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Serial Number | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
BOM.BOM_DEPT_RES_INSTANCES does not reference any database object
BOM.BOM_DEPT_RES_INSTANCES is referenced by following:
| Description: | Department Approvers |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_EAM_DEPT_APPROVERS.ORGANIZATION_ID | MTL_PARAMETERS |
|
BOM_EAM_DEPT_APPROVERS.RESPONSIBILITY_APPLICATION_ID
BOM_EAM_DEPT_APPROVERS.RESPONSIBILITY_ID |
FND_RESPONSIBILITY |
This table stores notification hierarchy associated with BOM departments. Users who has responsibility associated with a BOM department will receive work flow notifications.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_EAM_DEPT_APPROVERS_U1 | UNIQUE | APPS_TS_TX_IDX |
DEPT_ID
ORGANIZATION_ID RESPONSIBILITY_APPLICATION_ID RESPONSIBILITY_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPT_ID | NUMBER | Y | Internal identifier of the department | |
| ORGANIZATION_ID | NUMBER | Y | Manufacturing Organization | |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO Columns | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO Columns | |
| CREATION_DATE | DATE | Y | Standard WHO Columns | |
| CREATED_BY | NUMBER | Y | Standard WHO Columns | |
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO Columns | ||
| RESPONSIBILITY_APPLICATION_ID | NUMBER | Y | Internal identifier of the appliation with which the responsibility is tied to | |
| RESPONSIBILITY_ID | NUMBER | Y | Internal identifier of the responsibility associated with a department | |
| PRIMARY_APPROVER_ID | NUMBER | Primary approver id |
BOM.BOM_EAM_DEPT_APPROVERS does not reference any database object
BOM.BOM_EAM_DEPT_APPROVERS is referenced by following:
| Description: | Exception sets |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_CALENDAR_DATES.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
| BOM_CALENDAR_EXCEPTIONS.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
| BOM_CAL_WEEK_START_DATES.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
| BOM_CAL_YEAR_START_DATES.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
| BOM_EXCEPTION_SET_DATES.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
| BOM_PERIOD_START_DATES.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
| BOM_SHIFT_DATES.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
| BOM_SHIFT_EXCEPTIONS.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
| MTL_CYCLE_COUNT_HEADERS.CALENDAR_EXCEPTION_SET | BOM_EXCEPTION_SETS |
| MTL_PARAMETERS.CALENDAR_EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
BOM_EXCEPTION_SETS stores exception sets required to compile your
calendar.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_EXCEPTION_SETS_U1 | UNIQUE | APPS_TS_TX_IDX | EXCEPTION_SET_NAME |
| BOM_EXCEPTION_SETS_U2 | UNIQUE | APPS_TS_TX_IDX | EXCEPTION_SET_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EXCEPTION_SET_ID | NUMBER | Y | Exception set unique identifier | |
| EXCEPTION_SET_NAME | VARCHAR2 | (10) | Y | Exception set name |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Standard Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DISABLE_DATE | DATE | Disable date | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_EXCEPTION_SETS does not reference any database object
BOM.BOM_EXCEPTION_SETS is referenced by following:
| Description: | Used for workday exception templates |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_EXCEPTION_SET_DATES.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
BOM_EXCEPTION_SETS_DATES stores the dates for the exception set
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_EXCEPTION_SET_DATES_U1 | UNIQUE | APPS_TS_TX_IDX |
EXCEPTION_DATE
EXCEPTION_SET_ID |
| BOM_EXCEPTION_SET_DATES_N1 | NONUNIQUE | APPS_TS_TX_IDX | EXCEPTION_SET_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EXCEPTION_SET_ID | NUMBER | Y | Exception set unique identifier | |
| EXCEPTION_DATE | DATE | Y | Specifies the date for the exception | |
| EXCEPTION_TYPE | NUMBER | Y | Specifies whether the exception is an off day or an on day | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_EXCEPTION_SET_DATES does not reference any database object
BOM.BOM_EXCEPTION_SET_DATES is referenced by following:
| Description: |
|---|
This table is used to store the archived data. When ever exclusion rule is deleted thru ECO, then that rule will be moved into this table.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RULE_ID | NUMBER | Y | Foreign key for the rule header table. | |
| EXCLUSION_PATH | VARCHAR2 | (4000) | Y | It holds the path of the component to be excluded. |
| RULE_SEQUENCE | NUMBER | Y | Sequence Number | |
| APPLY_TO_PENDING_CHANGES | VARCHAR2 | (30) | Apply To Pending Changes | |
| ENABLED_FLAG | VARCHAR2 | (1) | Y | It holds the value of whether this exclusion rule is enabled or not |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO coloumn | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO coloumn | |
| CREATION_DATE | DATE | Y | Standard WHO coloumn | |
| CREATED_BY | NUMBER | Y | Standard WHO coloumn | |
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO coloumn | ||
| REQUEST_ID | NUMBER | Standard WHO coloumn | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard WHO coloumn | ||
| PROGRAM_ID | NUMBER | Standard WHO coloumn | ||
| PROGRAM_UPDATE_DATE | DATE | Standard WHO coloumn | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Standard DFF Column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Standard DFF Column | |
| CHANGE_ID | NUMBER | Change ID value | ||
| ACD_TYPE | NUMBER | ACD Type Value ( Add -1 , Change -2 & Delete -3) | ||
| IMPLEMENTATION_DATE | DATE | Implementation Date | ||
| DISABLE_DATE | DATE | Disable Date | ||
| FROM_REVISION_ID | NUMBER | From Revision Id | ||
| TO_REVISION_ID | NUMBER | To Revision Id |
BOM.BOM_EXCLUSION_RULE_ARCHIVE does not reference any database object
BOM.BOM_EXCLUSION_RULE_ARCHIVE is referenced by following:
| Description: |
|---|
This table stores the information of component to be excluded from the bom explosion.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_EXCLUSION_RULE_DEF_N1 | NONUNIQUE | APPS_TS_TX_IDX | RULE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RULE_ID | NUMBER | Y | Foreign key for the rule header table. | |
| EXCLUSION_PATH | VARCHAR2 | (4000) | Y | It holds the path of the component to be excluded. |
| RULE_SEQUENCE | NUMBER | Y | Sequence Number | |
| APPLY_TO_PENDING_CHANGES | VARCHAR2 | (30) | Apply To Pending Changes | |
| ENABLED_FLAG | VARCHAR2 | (1) | Y | It holds the value of whether this exclusion rule is enabled or not |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO coloumn | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO coloumn | |
| CREATION_DATE | DATE | Y | Standard WHO coloumn | |
| CREATED_BY | NUMBER | Y | Standard WHO coloumn | |
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO coloumn | ||
| REQUEST_ID | NUMBER | Standard WHO coloumn | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard WHO coloumn | ||
| PROGRAM_ID | NUMBER | Standard WHO coloumn | ||
| PROGRAM_UPDATE_DATE | DATE | Standard WHO coloumn | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Standard DFF Column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Standard DFF Column | |
| CHANGE_ID | NUMBER | Change ID value | ||
| ACD_TYPE | NUMBER | ACD Type Value ( Add -1 , Change -2 & Delete -3) | ||
| IMPLEMENTATION_DATE | DATE | Implementation Date | ||
| DISABLE_DATE | DATE | Disable Date | ||
| FROM_REVISION_ID | NUMBER | From Revision Id | ||
| TO_REVISION_ID | NUMBER | To Revision Id |
BOM.BOM_EXCLUSION_RULE_DEF does not reference any database object
BOM.BOM_EXCLUSION_RULE_DEF is referenced by following:
| Description: | Pre-exploded model bills for use by Order Entry |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_EXPLOSIONS.TOP_ITEM_ID
BOM_EXPLOSIONS.ORGANIZATION_ID |
MTL_SYSTEM_ITEMS_B |
|
BOM_EXPLOSIONS.COMPONENT_ITEM_ID
BOM_EXPLOSIONS.ORGANIZATION_ID |
MTL_SYSTEM_ITEMS_B |
This table contains permanent explosions of all model bills for use by
Oracle Order Management. It contains components with all
effective dates (within limits). There are three types of explosions:
Optional, Included, or Both. The types refer to whether the component
is mandatory or optional.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_EXPLOSIONS_U1 | UNIQUE | APPS_TS_TX_IDX |
TOP_BILL_SEQUENCE_ID
EXPLOSION_TYPE SORT_ORDER |
| BOM_EXPLOSIONS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
TOP_BILL_SEQUENCE_ID
EXPLOSION_TYPE PLAN_LEVEL EFFECTIVITY_DATE DISABLE_DATE |
| BOM_EXPLOSIONS_N10 | NONUNIQUE | APPS_TS_TX_IDX |
COMPONENT_ITEM_ID
ORGANIZATION_ID PLAN_LEVEL |
| BOM_EXPLOSIONS_N11 | NONUNIQUE | APPS_TS_TX_IDX |
ASSEMBLY_ITEM_ID
ORGANIZATION_ID TOP_BILL_SEQUENCE_ID IMPLEMENTATION_DATE EFFECTIVITY_DATE DISABLE_DATE SORT_ORDER |
| BOM_EXPLOSIONS_N2 | NONUNIQUE | APPS_TS_TX_IDX |
COMP_COMMON_BILL_SEQ_ID
TOP_BILL_SEQUENCE_ID EXPLOSION_TYPE |
| BOM_EXPLOSIONS_N3 | NONUNIQUE | APPS_TS_TX_IDX |
TOP_BILL_SEQUENCE_ID
EXPLOSION_TYPE REXPLODE_FLAG |
| BOM_EXPLOSIONS_N4 | NONUNIQUE | APPS_TS_TX_IDX |
COMPONENT_ITEM_ID
ORGANIZATION_ID TOP_BILL_SEQUENCE_ID |
| BOM_EXPLOSIONS_N6 | NONUNIQUE | APPS_TS_TX_IDX |
EXPLOSION_TYPE
ORGANIZATION_ID |
| BOM_EXPLOSIONS_N8 | NONUNIQUE | APPS_TS_TX_IDX | COMPONENT_SEQUENCE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TOP_BILL_SEQUENCE_ID | NUMBER | Y | Bill identifier of level 0 items | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier of parent | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| EXPLOSION_TYPE | VARCHAR2 | (20) | Y | Optional, included or all components |
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| COMPONENT_ITEM_ID | NUMBER | Y | Component item identifier | |
| PLAN_LEVEL | NUMBER | Y | Level in bill | |
| EXTENDED_QUANTITY | NUMBER | Extended quantity including quantity per, yield, and shrinkage | ||
| SORT_ORDER | VARCHAR2 | (2000) | Y | Sorting sequence for the explosion |
| CREATION_DATE | DATE | Who column | ||
| CREATED_BY | NUMBER | Who column | ||
| LAST_UPDATE_DATE | DATE | Who column | ||
| LAST_UPDATED_BY | NUMBER | Who column | ||
| TOP_ITEM_ID | NUMBER | Y | Item identifier of level 0 item | |
| CONTEXT | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| COMPONENT_QUANTITY | NUMBER | Quantity of component in bill of material | ||
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Management to determine how many units of component to put on an order | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill of material | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| CHECK_ATP | NUMBER | Flag indicating if ATP check is required | ||
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to ship | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is included on shipping documents | ||
| INCLUDE_ON_BILL_DOCS | NUMBER | Flag indicating if component is included on billing documents | ||
| LOW_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| HIGH_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| PICK_COMPONENTS | NUMBER | (not currently used) | ||
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | Unit of measure code of component | |
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (25) | Unit of measure of component | |
| BASE_ITEM_ID | NUMBER | Base item identifier | ||
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | Flag indicating whether item may have components requiring ATP check | |
| ATP_FLAG | VARCHAR2 | (1) | Flag indicating ATP must be checked when item is ordered | |
| BOM_ITEM_TYPE | NUMBER | Type of item | ||
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | Flag indicating all shippable components should be picked | |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | Assemble to order flag | |
| SHIPPABLE_ITEM_FLAG | VARCHAR2 | (1) | Flag indicating shippable item | |
| CUSTOMER_ORDER_FLAG | VARCHAR2 | (1) | Flag indicating customer orderable item | |
| INTERNAL_ORDER_FLAG | VARCHAR2 | (1) | Flag indicating internally orderable item | |
| CUSTOMER_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | Flag indicating item is customer orderable | |
| INTERNAL_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | Flag indicating item is internally orderable | |
| SO_TRANSACTIONS_FLAG | VARCHAR2 | (1) | Sales order transactions flag | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ASSEMBLY_ITEM_ID | NUMBER | Assembly item identifier | ||
| COMPONENT_CODE | VARCHAR2 | (2000) | Concatenation of component item identifiers | |
| LOOP_FLAG | NUMBER | Indicates whether a loop is detected | ||
| PARENT_BOM_ITEM_TYPE | NUMBER | Parent item's bom item type | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| ITEM_NUM | NUMBER | Item sequence within bill of material structure | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| DISABLE_DATE | DATE | Disable date | ||
| IMPLEMENTATION_DATE | DATE | Date on which engineering change order was implemented | ||
| REXPLODE_FLAG | NUMBER | Flag indicating whether to re-explode | ||
| COMMON_BILL_SEQUENCE_ID | NUMBER | Common bill of material unique identifier of parent | ||
| COMP_BILL_SEQ_ID | NUMBER | Component's bill sequence identifier | ||
| COMP_COMMON_BILL_SEQ_ID | NUMBER | Component's common bill sequence identifier | ||
| EXPLODE_GROUP_ID | NUMBER | (not used) | ||
| NUM_COL1 | NUMBER | (not used) | ||
| NUM_COL2 | NUMBER | (not used) | ||
| NUM_COL3 | NUMBER | (not used) | ||
| DATE_COL1 | DATE | (not used) | ||
| DATE_COL2 | DATE | (not used) | ||
| DATE_COL3 | DATE | (not used) | ||
| CHAR_COL1 | VARCHAR2 | (80) | (not used) | |
| CHAR_COL2 | VARCHAR2 | (80) | (not used) | |
| CHAR_COL3 | VARCHAR2 | (80) | (not used) | |
| AUTO_REQUEST_MATERIAL | VARCHAR2 | (1) | Auomatically create move order for the material at work order release | |
| INCLUDE_IN_COST_ROLLUP | NUMBER | Flag indicating if this component is to be used when rolling up costs | ||
| COMPONENT_YIELD_FACTOR | NUMBER | Factor used to multiply component quantity with to obtain required component quantity | ||
| PLANNING_FACTOR | NUMBER | Factor used to multiply component quantity with to obtain planning quantity | ||
| CHANGE_NOTICE | VARCHAR2 | (240) | Engineering change order number | |
| PARENT_SORT_ORDER | VARCHAR2 | (2000) | Parent Sorting sequence for the explosion | |
| SUGGESTED_VENDOR_NAME | VARCHAR2 | (240) | Suggested vendor name | |
| VENDOR_ID | NUMBER | Suggested Vendor ID column | ||
| UNIT_PRICE | NUMBER | Unit Price for direct items used by EAM BOMs | ||
| REQUEST_ID | NUMBER | (22) | Request id | |
| BASIS_TYPE | NUMBER | Basis type identifier | ||
| SOURCE_BILL_SEQUENCE_ID | NUMBER | Source bill sequence id | ||
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common component sequence id | ||
| COMP_SOURCE_BILL_SEQ_ID | NUMBER | Component source bill sequence id |
BOM.BOM_EXPLOSIONS does not reference any database object
BOM.BOM_EXPLOSIONS is referenced by following:
| Description: |
|---|
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_EXPLOSIONS_ALL_N1 | NONUNIQUE | APPS_TS_TX_IDX |
GROUP_ID
OBJ_NAME PRIMARY_UOM_CODE |
| BOM_EXPLOSIONS_ALL_N2 | NONUNIQUE | APPS_TS_TX_IDX |
GROUP_ID
SORT_ORDER |
| BOM_EXPLOSIONS_ALL_N3 | NONUNIQUE | APPS_TS_TX_IDX |
TOP_BILL_SEQUENCE_ID
EXPLODED_OPTION PLAN_LEVEL |
| BOM_EXPLOSIONS_ALL_N4 | NONUNIQUE | APPS_TS_TX_IDX |
GROUP_ID
ORGANIZATION_ID CHANGE_NOTICE |
| BOM_EXPLOSIONS_ALL_N5 | NONUNIQUE | APPS_TS_TX_IDX |
GROUP_ID
PLAN_LEVEL |
| BOM_EXPLOSIONS_ALL_N6 | NONUNIQUE | APPS_TS_TX_IDX |
GROUP_ID
COMP_BILL_SEQ_ID REXPLODE_FLAG |
| BOM_EXPLOSIONS_ALL_N7 | NONUNIQUE | APPS_TS_TX_IDX |
COMPONENT_ITEM_ID
ORGANIZATION_ID TOP_ALTERNATE_DESIGNATOR |
| BOM_EXPLOSIONS_ALL_N8 | NONUNIQUE | APPS_TS_TX_IDX |
GROUP_ID
COMP_COMMON_BILL_SEQ_ID |
| BOM_EXPLOSIONS_ALL_N9 | NONUNIQUE | APPS_TS_TX_IDX |
GROUP_ID
IS_EXCLUDED_BY_RULE PARENT_SORT_ORDER |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TOP_BILL_SEQUENCE_ID | NUMBER | Y | ||
| BILL_SEQUENCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| COMPONENT_SEQUENCE_ID | NUMBER | |||
| COMPONENT_ITEM_ID | NUMBER | |||
| PLAN_LEVEL | NUMBER | Y | ||
| EXTENDED_QUANTITY | NUMBER | |||
| SORT_ORDER | VARCHAR2 | (2000) | Y | |
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE | |||
| GROUP_ID | NUMBER | |||
| SESSION_ID | NUMBER | |||
| SELECT_FLAG | VARCHAR2 | (1) | ||
| SELECT_QUANTITY | NUMBER | |||
| EXTEND_COST_FLAG | NUMBER | |||
| TOP_ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | ||
| TOP_ITEM_ID | NUMBER | |||
| CONTEXT | VARCHAR2 | (30) | ||
| ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ATTRIBUTE15 | VARCHAR2 | (150) | ||
| HEADER_ID | NUMBER | |||
| LINE_ID | NUMBER | |||
| LIST_PRICE | NUMBER | |||
| SELLING_PRICE | NUMBER | |||
| COMPONENT_YIELD_FACTOR | NUMBER | |||
| ITEM_COST | NUMBER | |||
| INCLUDE_IN_ROLLUP_FLAG | NUMBER | |||
| BASED_ON_ROLLUP_FLAG | NUMBER | |||
| ACTUAL_COST_TYPE_ID | NUMBER | |||
| COMPONENT_QUANTITY | NUMBER | |||
| SHRINKAGE_RATE | NUMBER | |||
| SO_BASIS | NUMBER | |||
| OPTIONAL | NUMBER | |||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | |||
| CHECK_ATP | NUMBER | |||
| SHIPPING_ALLOWED | NUMBER | |||
| REQUIRED_TO_SHIP | NUMBER | |||
| REQUIRED_FOR_REVENUE | NUMBER | |||
| INCLUDE_ON_SHIP_DOCS | NUMBER | |||
| INCLUDE_ON_BILL_DOCS | NUMBER | |||
| LOW_QUANTITY | NUMBER | |||
| HIGH_QUANTITY | NUMBER | |||
| PICK_COMPONENTS | NUMBER | |||
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | ||
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (25) | ||
| BASE_ITEM_ID | NUMBER | |||
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | ||
| ATP_FLAG | VARCHAR2 | (1) | ||
| BOM_ITEM_TYPE | NUMBER | |||
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | ||
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | ||
| SHIPPABLE_ITEM_FLAG | VARCHAR2 | (1) | ||
| CUSTOMER_ORDER_FLAG | VARCHAR2 | (1) | ||
| INTERNAL_ORDER_FLAG | VARCHAR2 | (1) | ||
| CUSTOMER_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | ||
| INTERNAL_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | ||
| SO_TRANSACTIONS_FLAG | VARCHAR2 | (1) | ||
| MTL_TRANSACTIONS_ENABLED_FLAG | VARCHAR2 | (1) | ||
| STOCK_ENABLED_FLAG | VARCHAR2 | (1) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| ASSEMBLY_ITEM_ID | NUMBER | |||
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | ||
| CONFIGURATOR_FLAG | VARCHAR2 | (1) | ||
| PRICE_LIST_ID | NUMBER | |||
| ROUNDING_FACTOR | NUMBER | |||
| PRICING_CONTEXT | VARCHAR2 | (30) | ||
| PRICING_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| PRICING_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| PRICING_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| PRICING_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| PRICING_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| PRICING_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| PRICING_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| PRICING_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| PRICING_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| PRICING_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| PRICING_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| PRICING_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| PRICING_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| PRICING_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| PRICING_ATTRIBUTE15 | VARCHAR2 | (150) | ||
| COMPONENT_CODE | VARCHAR2 | (1000) | ||
| LOOP_FLAG | NUMBER | |||
| INVENTORY_ASSET_FLAG | NUMBER | |||
| PLANNING_FACTOR | NUMBER | |||
| OPERATION_SEQ_NUM | NUMBER | |||
| PARENT_BOM_ITEM_TYPE | NUMBER | |||
| WIP_SUPPLY_TYPE | NUMBER | |||
| ITEM_NUM | NUMBER | |||
| EFFECTIVITY_DATE | DATE | |||
| DISABLE_DATE | DATE | |||
| TRIMMED_EFFECTIVITY_DATE | DATE | |||
| TRIMMED_DISABLE_DATE | DATE | |||
| IMPLEMENTATION_DATE | DATE | |||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | ||
| SUPPLY_LOCATOR_ID | NUMBER | |||
| COMPONENT_REMARKS | VARCHAR2 | (240) | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | ||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | |||
| REXPLODE_FLAG | NUMBER | |||
| COMMON_BILL_SEQUENCE_ID | NUMBER | |||
| COMMON_ORGANIZATION_ID | NUMBER | |||
| PRIMARY_PATH_FLAG | NUMBER | |||
| AUTO_REQUEST_MATERIAL | VARCHAR2 | (1) | ||
| EXPLOSION_TYPE | VARCHAR2 | (20) | ||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | |||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | |||
| COMP_BILL_SEQ_ID | NUMBER | |||
| COMP_COMMON_BILL_SEQ_ID | NUMBER | |||
| NUM_COL1 | NUMBER | |||
| NUM_COL2 | NUMBER | |||
| NUM_COL3 | NUMBER | |||
| DATE_COL1 | DATE | |||
| DATE_COL2 | DATE | |||
| DATE_COL3 | DATE | |||
| CHAR_COL1 | VARCHAR2 | (80) | ||
| CHAR_COL2 | VARCHAR2 | (80) | ||
| CHAR_COL3 | VARCHAR2 | (80) | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | |||
| PARENT_SORT_ORDER | VARCHAR2 | (2000) | ||
| STRUCTURE_TYPE_ID | NUMBER | |||
| OBJ_NAME | VARCHAR2 | (30) | ||
| PK1_VALUE | VARCHAR2 | (240) | ||
| PK2_VALUE | VARCHAR2 | (240) | ||
| PK3_VALUE | VARCHAR2 | (240) | ||
| PK4_VALUE | VARCHAR2 | (240) | ||
| PK5_VALUE | VARCHAR2 | (240) | ||
| HGRID_FLAG | VARCHAR2 | (240) | ||
| OPERATION_OFFSET | NUMBER | |||
| CURRENT_REVISION | VARCHAR2 | (3) | ||
| LOCATOR | VARCHAR2 | (40) | ||
| SUGGESTED_VENDOR_NAME | VARCHAR2 | (240) | ||
| UNIT_PRICE | NUMBER | |||
| VENDOR_ID | NUMBER | |||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| TRIMMED_FROM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| TRIMMED_TO_UNIT_NUMBER | VARCHAR2 | (30) | ||
| FROM_END_ITEM_REV_ID | NUMBER | |||
| FROM_END_ITEM_MINOR_REV_ID | NUMBER | |||
| TO_END_ITEM_REV_ID | NUMBER | |||
| TO_END_ITEM_MINOR_REV_ID | NUMBER | |||
| NEW_COMPONENT_CODE | VARCHAR2 | (4000) | ||
| FROM_BILL_REVISION_ID | NUMBER | |||
| TO_BILL_REVISION_ID | NUMBER | |||
| REVISION_ID | NUMBER | |||
| REVISION_LABEL | VARCHAR2 | (260) | ||
| EFFECTIVITY_CONTROL | NUMBER | |||
| ACCESS_FLAG | VARCHAR2 | (1) | ||
| ENG_ITEM_FLAG | VARCHAR2 | (1) | ||
| ASSEMBLY_TYPE | NUMBER | |||
| FROM_OBJECT_REVISION_ID | NUMBER | |||
| FROM_MINOR_REVISION_ID | NUMBER | |||
| TO_OBJECT_REVISION_ID | NUMBER | |||
| TO_MINOR_REVISION_ID | NUMBER | |||
| OBJECT_REVISION_ID | NUMBER | |||
| MINOR_REVISION_ID | NUMBER | |||
| MINOR_REVISION_CODE | VARCHAR2 | (30) | ||
| COMPONENT_ITEM_REVISION_ID | NUMBER | |||
| COMPONENT_MINOR_REVISION_ID | NUMBER | |||
| BOM_IMPLEMENTATION_DATE | DATE | |||
| GTIN_NUMBER | VARCHAR2 | (25) | ||
| GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (35) | ||
| TRADE_ITEM_DESCRIPTOR_DESC | VARCHAR2 | (80) | ||
| GTIN_PUBLICATION_STATUS | VARCHAR2 | (1) | ||
| TOP_GTIN_NUMBER | VARCHAR2 | (25) | ||
| TOP_GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| TOP_TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (35) | ||
| PARENT_GTIN_NUMBER | VARCHAR2 | (25) | ||
| PARENT_GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| PARENT_TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (35) | ||
| QUANTITY_OF_CHILDREN | NUMBER | |||
| TOTAL_QTY_AT_NEXT_LEVEL | NUMBER | |||
| CHANGE_ID | NUMBER | |||
| ACD_TYPE | NUMBER | |||
| QUANTITY_RELATED | NUMBER | |||
| CHANGE_POLICY_VALUE | VARCHAR2 | (240) | ||
| EXPLODED_DATE | DATE | |||
| EXPLODED_UNIT_NUMBER | VARCHAR2 | (30) | ||
| EXPLODED_END_ITEM_REV | NUMBER | |||
| EXPLODED_END_ITEM_ID | NUMBER | |||
| EXPLODED_END_ITEM_ORG_ID | NUMBER | |||
| EXPLODED_OPTION | NUMBER | |||
| PARENT_COMP_SEQ_ID | NUMBER | |||
| END_ITEM_ID | NUMBER | |||
| END_ITEM_ORG_ID | NUMBER | |||
| FROM_END_ITEM_REVISION | VARCHAR2 | (10) | ||
| TO_END_ITEM_REVISION | VARCHAR2 | (10) | ||
| IS_END_ITEM_SPECIFIC | VARCHAR2 | (1) | ||
| IS_EXCLUDED_BY_RULE | VARCHAR2 | (1) | ||
| REAPPLY_EXCLUSIONS | VARCHAR2 | (1) | ||
| COMP_FIXED_REV_HIGH_DATE | DATE | |||
| COMP_FIXED_REVISION_ID | NUMBER | |||
| MAX_BILL_LEVEL | NUMBER | |||
| IS_PREFERRED | VARCHAR2 | (1) | ||
| PARENT_IMPLEMENTATION_DATE | DATE | |||
| PARENT_CHANGE_NOTICE | VARCHAR2 | (10) | ||
| BASIS_TYPE | NUMBER | |||
| SOURCE_BILL_SEQUENCE_ID | NUMBER | |||
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | |||
| COMP_SOURCE_BILL_SEQ_ID | NUMBER | |||
| COMP_EFFECTIVITY_CONTROL | NUMBER |
BOM.BOM_EXPLOSIONS_ALL does not reference any database object
BOM.BOM_EXPLOSIONS_ALL is referenced by following:
| Description: | Temporary data for indented bills of material (batch processes) |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_EXPLOSION_TEMP.TOP_BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
| BOM_EXPLOSION_TEMP.BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
|
BOM_EXPLOSION_TEMP.TOP_ITEM_ID
BOM_EXPLOSION_TEMP.ORGANIZATION_ID BOM_EXPLOSION_TEMP.TOP_ALTERNATE_DESIGNATOR |
BOM_STRUCTURES_B |
| BOM_EXPLOSION_TEMP.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_EXPLOSION_TEMP_N1 | NONUNIQUE |
COMPONENT_ITEM_ID
COMPONENT_SEQUENCE_ID | |
| BOM_EXPLOSION_TEMP_N10 | NONUNIQUE |
GROUP_ID
SORT_ORDER | |
| BOM_EXPLOSION_TEMP_N11 | NONUNIQUE | BILL_SEQUENCE_ID | |
| BOM_EXPLOSION_TEMP_N2 | NONUNIQUE |
TOP_BILL_SEQUENCE_ID
GROUP_ID COMPONENT_ITEM_ID | |
| BOM_EXPLOSION_TEMP_N3 | NONUNIQUE |
GROUP_ID
PLAN_LEVEL COMPONENT_ITEM_ID | |
| BOM_EXPLOSION_TEMP_N4 | NONUNIQUE |
GROUP_ID
LINE_ID | |
| BOM_EXPLOSION_TEMP_N5 | NONUNIQUE |
SESSION_ID
TOP_BILL_SEQUENCE_ID | |
| BOM_EXPLOSION_TEMP_N7 | NONUNIQUE |
TOP_BILL_SEQUENCE_ID
EXPLOSION_TYPE REXPLODE_FLAG | |
| BOM_EXPLOSION_TEMP_N8 | NONUNIQUE |
COMPONENT_ITEM_ID
ORGANIZATION_ID TOP_BILL_SEQUENCE_ID | |
| BOM_EXPLOSION_TEMP_N9 | NONUNIQUE |
EXPLOSION_TYPE
SYS_NC00184$ SYS_NC00185$ |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TOP_BILL_SEQUENCE_ID | NUMBER | Y | Bill identifier of level 0 items | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| PLAN_LEVEL | NUMBER | Y | Level in bill | |
| EXTENDED_QUANTITY | NUMBER | Extended quantity including quantity per, yield, and shrinkage | ||
| SORT_ORDER | VARCHAR2 | (2000) | Y | Sorting sequence for the explosion |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| GROUP_ID | NUMBER | Explosion identifier | ||
| SESSION_ID | NUMBER | Session identifier | ||
| SELECT_FLAG | VARCHAR2 | (1) | Whether this component has been ordered | |
| SELECT_QUANTITY | NUMBER | Order quantity | ||
| EXTEND_COST_FLAG | NUMBER | Whether to extend cost for this item | ||
| TOP_ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate designator for level 0 | |
| TOP_ITEM_ID | NUMBER | Item identifier of level 0 item | ||
| CONTEXT | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| HEADER_ID | NUMBER | System-generated identifier of order header | ||
| LINE_ID | NUMBER | System-generated identifier of order, configuration or shipment schedule line | ||
| LIST_PRICE | NUMBER | The price of the item on the price list | ||
| SELLING_PRICE | NUMBER | Actual price charged to customer | ||
| COMPONENT_YIELD_FACTOR | NUMBER | Component yield | ||
| ITEM_COST | NUMBER | Item unit cost | ||
| INCLUDE_IN_ROLLUP_FLAG | NUMBER | Flag indicating if component is to be used when rolling up costs | ||
| BASED_ON_ROLLUP_FLAG | NUMBER | Flag indicating whether cost will be rolled up | ||
| ACTUAL_COST_TYPE_ID | NUMBER | Actual cost type identifier | ||
| COMPONENT_QUANTITY | NUMBER | Quantity of component in bill of material | ||
| SHRINKAGE_RATE | NUMBER | Planned shrinkage rate | ||
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Management to determine how many units of component to put on an order | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill of material | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| CHECK_ATP | NUMBER | Flag indicating if ATP check is required | ||
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to ship | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is included on shipping documents | ||
| INCLUDE_ON_BILL_DOCS | NUMBER | Flag indicating if component is included on billing documents | ||
| LOW_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| HIGH_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| PICK_COMPONENTS | NUMBER | (not currently used) | ||
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | Unit of measure code of component | |
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (25) | Unit of measure of component | |
| BASE_ITEM_ID | NUMBER | Base item identifier | ||
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | Flag indicating whether item may have components requiring ATP check | |
| ATP_FLAG | VARCHAR2 | (1) | Flag indicating ATP must be checked when item is ordered | |
| BOM_ITEM_TYPE | NUMBER | Type of item | ||
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | Flag indicating all shippable components should be picked | |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | Assemble to order flag | |
| SHIPPABLE_ITEM_FLAG | VARCHAR2 | (1) | Flag indicating shippable item | |
| CUSTOMER_ORDER_FLAG | VARCHAR2 | (1) | Flag indicating customer orderable item | |
| INTERNAL_ORDER_FLAG | VARCHAR2 | (1) | Flag indicating item has been internally ordered | |
| CUSTOMER_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | Flag indicating item is customer orderable | |
| INTERNAL_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | Flag indicating item can be internally ordered | |
| SO_TRANSACTIONS_FLAG | VARCHAR2 | (1) | Sales order transactions flag | |
| MTL_TRANSACTIONS_ENABLED_FLAG | VARCHAR2 | (1) | Flag indicating item is transactable | |
| STOCK_ENABLED_FLAG | VARCHAR2 | (1) | Flag indicating item is stockable | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ASSEMBLY_ITEM_ID | NUMBER | Assembly item identifier | ||
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | ||
| CONFIGURATOR_FLAG | VARCHAR2 | (1) | Flag indicating if component is used by the configurator form | |
| PRICE_LIST_ID | NUMBER | System-generated identifier of price list | ||
| ROUNDING_FACTOR | NUMBER | Rounding factor used to determine order quantity | ||
| PRICING_CONTEXT | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| PRICING_ATTRIBUTE1 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE2 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE3 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE4 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE5 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE6 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE7 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE8 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE9 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE10 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE11 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE12 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE13 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE14 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE15 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| COMPONENT_CODE | VARCHAR2 | (1000) | Concatenation of component item identifiers | |
| LOOP_FLAG | NUMBER | Indicates whether a loop is detected | ||
| INVENTORY_ASSET_FLAG | NUMBER | Flag indicating item is an inventory asset | ||
| PLANNING_FACTOR | NUMBER | Factor used to multiply component quantity with to obtain planning quantity | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| PARENT_BOM_ITEM_TYPE | NUMBER | Parent item's bom item type | ||
| WIP_SUPPLY_TYPE | NUMBER | Supply type | ||
| ITEM_NUM | NUMBER | Item sequence within bill of material structure | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| DISABLE_DATE | DATE | Disable date | ||
| IMPLEMENTATION_DATE | DATE | Date on which engineering change order was implemented | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator identifier | ||
| COMPONENT_REMARKS | VARCHAR2 | (240) | Component remarks | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Operation offset from first operation in routing | ||
| REXPLODE_FLAG | NUMBER | Flag indicating whether to re-explode | ||
| COMMON_BILL_SEQUENCE_ID | NUMBER | Common bill of material unique identifier | ||
| COMMON_ORGANIZATION_ID | NUMBER | |||
| PRIMARY_PATH_FLAG | NUMBER | Primary path flag | ||
| AUTO_REQUEST_MATERIAL | VARCHAR2 | (1) | Auomatically create move order for the material at work order release | |
| EXPLOSION_TYPE | VARCHAR2 | (20) | ||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | |||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | |||
| COMP_BILL_SEQ_ID | NUMBER | |||
| COMP_COMMON_BILL_SEQ_ID | NUMBER | |||
| NUM_COL1 | NUMBER | |||
| NUM_COL2 | NUMBER | |||
| NUM_COL3 | NUMBER | |||
| DATE_COL1 | DATE | |||
| DATE_COL2 | DATE | |||
| DATE_COL3 | DATE | |||
| CHAR_COL1 | VARCHAR2 | (80) | ||
| CHAR_COL2 | VARCHAR2 | (80) | ||
| CHAR_COL3 | VARCHAR2 | (80) | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | |||
| PARENT_SORT_ORDER | VARCHAR2 | (2000) | ||
| STRUCTURE_TYPE_ID | NUMBER | |||
| OBJ_NAME | VARCHAR2 | (30) | ||
| PK1_VALUE | VARCHAR2 | (240) | ||
| PK2_VALUE | VARCHAR2 | (240) | ||
| PK3_VALUE | VARCHAR2 | (240) | ||
| PK4_VALUE | VARCHAR2 | (240) | ||
| PK5_VALUE | VARCHAR2 | (240) | ||
| HGRID_FLAG | VARCHAR2 | (240) | ||
| OPERATION_OFFSET | NUMBER | |||
| CURRENT_REVISION | VARCHAR2 | (3) | ||
| LOCATOR | VARCHAR2 | (40) | ||
| SUGGESTED_VENDOR_NAME | VARCHAR2 | (240) | Used by direct items in EAM BOMs | |
| UNIT_PRICE | NUMBER | Unit Price for direct items used by EAM BOMs | ||
| VENDOR_ID | NUMBER | Used by direct items in EAM BOMs | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| FROM_END_ITEM_REV_ID | NUMBER | |||
| FROM_END_ITEM_MINOR_REV_ID | NUMBER | |||
| TO_END_ITEM_REV_ID | NUMBER | |||
| TO_END_ITEM_MINOR_REV_ID | NUMBER | |||
| NEW_COMPONENT_CODE | VARCHAR2 | (4000) | ||
| FROM_BILL_REVISION_ID | NUMBER | |||
| TO_BILL_REVISION_ID | NUMBER | |||
| REVISION_ID | NUMBER | |||
| REVISION_LABEL | VARCHAR2 | (260) | ||
| EFFECTIVITY_CONTROL | NUMBER | |||
| ACCESS_FLAG | VARCHAR2 | (1) | ||
| ENG_ITEM_FLAG | VARCHAR2 | (1) | ||
| ASSEMBLY_TYPE | NUMBER | |||
| FROM_OBJECT_REVISION_ID | NUMBER | |||
| FROM_MINOR_REVISION_ID | NUMBER | |||
| TO_OBJECT_REVISION_ID | NUMBER | |||
| TO_MINOR_REVISION_ID | NUMBER | |||
| OBJECT_REVISION_ID | NUMBER | |||
| MINOR_REVISION_ID | NUMBER | |||
| MINOR_REVISION_CODE | VARCHAR2 | (30) | ||
| COMPONENT_ITEM_REVISION_ID | NUMBER | |||
| COMPONENT_MINOR_REVISION_ID | NUMBER | |||
| BOM_IMPLEMENTATION_DATE | DATE | |||
| GTIN_NUMBER | VARCHAR2 | (25) | ||
| GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (35) | ||
| TOP_GTIN_NUMBER | VARCHAR2 | (25) | ||
| TOP_GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| TOP_TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (35) | ||
| PARENT_GTIN_NUMBER | VARCHAR2 | (25) | ||
| PARENT_GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| PARENT_TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (35) | ||
| TRADE_ITEM_DESCRIPTOR_DESC | VARCHAR2 | (80) | ||
| GTIN_PUBLICATION_STATUS | VARCHAR2 | (1) | ||
| QUANTITY_OF_CHILDREN | NUMBER | |||
| TOTAL_QTY_AT_NEXT_LEVEL | NUMBER | |||
| CHANGE_ID | NUMBER | |||
| ACD_TYPE | NUMBER | |||
| QUANTITY_RELATED | NUMBER | |||
| CHANGE_POLICY_VALUE | NUMBER | |||
| EXPLODED_DATE | DATE | |||
| EXPLODED_UNIT_NUMBER | VARCHAR2 | (30) | ||
| EXPLODED_END_ITEM_REV | NUMBER | |||
| EXPLODED_OPTION | NUMBER | |||
| BASIS_TYPE | NUMBER |
BOM.BOM_EXPLOSION_TEMP does not reference any database object
BOM.BOM_EXPLOSION_TEMP is referenced by following:
| Description: | Retrofitted |
|---|
This table is not used
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_FORM_QUERY_N1 | NONUNIQUE | APPS_TS_ARCHIVE |
QUERY_ID
DATE1 |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| QUERY_ID | NUMBER | Y | Query Identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| DATE1 | DATE | Date Column | ||
| DATE2 | DATE | Date Column | ||
| DATE3 | DATE | Date Column | ||
| DATE4 | DATE | Date Column | ||
| DATE5 | DATE | Date Column | ||
| DATE6 | DATE | Date Column | ||
| DATE7 | DATE | Date Column | ||
| DATE8 | DATE | Date Column | ||
| NUMBER1 | NUMBER | Number Column | ||
| NUMBER2 | NUMBER | Number Column | ||
| NUMBER3 | NUMBER | Number Column | ||
| NUMBER4 | NUMBER | Number Column | ||
| NUMBER5 | NUMBER | Number Column | ||
| NUMBER6 | NUMBER | Number Column | ||
| NUMBER7 | NUMBER | Number Column | ||
| NUMBER8 | NUMBER | Number Column | ||
| NUMBER9 | NUMBER | Number Column | ||
| NUMBER10 | NUMBER | Number Column | ||
| NUMBER11 | NUMBER | Number Column | ||
| NUMBER12 | NUMBER | Number Column | ||
| NUMBER13 | NUMBER | Number Column | ||
| NUMBER14 | NUMBER | Number Column | ||
| NUMBER15 | NUMBER | Number Column | ||
| REQUEST_ID | NUMBER | Request Identifier | ||
| CHAR1 | VARCHAR2 | (80) | Character column | |
| CHAR2 | VARCHAR2 | (80) | Character column | |
| CHAR3 | VARCHAR2 | (80) | Character column | |
| CHAR4 | VARCHAR2 | (80) | Character column | |
| CHAR5 | VARCHAR2 | (80) | Character column | |
| CHAR6 | VARCHAR2 | (80) | Character column | |
| CHAR7 | VARCHAR2 | (80) | Character column | |
| CHAR8 | VARCHAR2 | (80) | Character column | |
| CHAR9 | VARCHAR2 | (250) | Character column | |
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column |
BOM.BOM_FORM_QUERY does not reference any database object
BOM.BOM_FORM_QUERY is referenced by following:
| Description: | Temporary data for item usage (Item Where Used Report) |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_IMPLOSION_TEMP.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
BOM_IMPLOSION_TEMP stores temporary information about where an item is
used in a bill of material structure. The item implosion process
generates this information by recursively travelling up the bill of
material structure. This table is used by the Item Where Used Report.
.
SEQUENCE_ID is the unique identifier for each implosion process.
.
LOWEST_ITEM_ID is the item that you are imploding. CURRENT_ITEM_ID is
the item id of the current row. PARENT_ITEM_ID is the item id of the
parent of the current item. LOWEST_ALTERNATE_DESIGNATOR is the
alternate of each first level parent of the imploded item.
.
SORT_CODE stores information about a particular node in the indented
structure. You must order the rows by SORT_ORDER to retrieve the
correct bill structure. The following example shows how the sort
order is determined (inventory_item_ids are in parentheses).
.
=
A (11)
|
+------+------+
| |
B(12) C(13)
| |
+----+----+ +----+----+
| | | |
D(14) E(15) F(16) G(17)
|
F(16)
=
.
An implosion of item F will generate the following sort orders:
.
=
Item Sort Order
---------- ------------------------------
F 001
D 001001
C 001002
B 001001001
A 001002001
A 001001001001
=
.
When you select and order by SORT_ORDER, you get:
=
F
.D
..B
...A
.C
..A
=
.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_IMPLOSION_TEMP_N1 | NONUNIQUE |
SEQUENCE_ID
CURRENT_LEVEL PARENT_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_ID | NUMBER | (22) | Y | Implosion identifier |
| LOWEST_ITEM_ID | NUMBER | Y | Identifier of item to implode | |
| CURRENT_ITEM_ID | NUMBER | Y | Item identifier of current component | |
| PARENT_ITEM_ID | NUMBER | Assembly item identifier | ||
| ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate bom designator | |
| CURRENT_LEVEL | NUMBER | Y | Implosion level | |
| SORT_CODE | VARCHAR2 | (2000) | Y | Sort sequence |
| LOWEST_ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate bom designator of level 1 items | |
| CURRENT_ASSEMBLY_TYPE | NUMBER | Assembly type | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| DISABLE_DATE | DATE | Disable date | ||
| COMPONENT_QUANTITY | NUMBER | Component quantity | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Revised item unique identifier | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| IMPLEMENTED_FLAG | NUMBER | Indicator if component row is implemented or pending | ||
| BASIS_TYPE | NUMBER | Basis type identifier |
BOM.BOM_IMPLOSION_TEMP does not reference any database object
BOM.BOM_IMPLOSION_TEMP is referenced by following:
| Description: | Delete group names for Bill, Routing and Engineering change order Open Interface |
|---|
BOM_INTERFACE_DELETE_GROUPS contains the default delete group names
for bills, components, routings, and operations. These names are used
when the Bill, Routing, and ECO Open Interfaces are instructed to
delete these type of objects.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_INTERFACE_DELETE_GROUPS_U1 | UNIQUE | APPS_TS_TX_IDX | ENTITY_NAME |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ENTITY_NAME | VARCHAR2 | (50) | Y | Name of the entity the delete group name is used for.The values in this column can only be: BOM_BILL_OF_MTLS_INTERFACE, BOM_INVENTORY_COMPS_INTERFACE, BOM_OP_ ROUTINGS_INTERFACE, or BOM_OP_SEQUENCES_INTERFACE |
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Y | Delete group name for the entity type you are deleting |
| DESCRIPTION | VARCHAR2 | (240) | Description of the delete group |
BOM.BOM_INTERFACE_DELETE_GROUPS does not reference any database object
BOM.BOM_INTERFACE_DELETE_GROUPS is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATIONCODE | VARCHAR2 | (3) | ||
| ASSEMBLYITEMNAME | VARCHAR2 | (81) | ||
| STARTEFFECTIVEDATE | VARCHAR2 | (19) | ||
| DISABLEDATE | VARCHAR2 | (19) | ||
| OPERATIONSEQUENCENUMBER | NUMBER | |||
| COMPONENTITEMNAME | VARCHAR2 | (81) | ||
| ALTERNATEBOMCODE | VARCHAR2 | (10) | ||
| NEWEFFECTIVITYDATE | VARCHAR2 | (19) | ||
| NEWOPERATIONSEQUENCENUMBER | NUMBER | |||
| ITEMSEQUENCENUMBER | NUMBER | |||
| QUANTITYPERASSEMBLY | VARCHAR2 | (150) | ||
| PLANNINGPERCENT | VARCHAR2 | (150) | ||
| PROJECTEDYIELD | VARCHAR2 | (150) | ||
| INCLUDEINCOSTROLLUP | NUMBER | |||
| WIPSUPPLYTYPE | NUMBER | |||
| SOBASIS | NUMBER | |||
| OPTIONAL | NUMBER | |||
| MUTUALLYEXCLUSIVE | NUMBER | |||
| CHECKATP | NUMBER | |||
| SHIPPINGALLOWED | NUMBER | |||
| REQUIREDTOSHIP | NUMBER | |||
| REQUIREDFORREVENUE | NUMBER | |||
| INCLUDEONSHIPDOCS | NUMBER | |||
| QUANTITYRELATED | NUMBER | |||
| SUPPLYSUBINVENTORY | VARCHAR2 | (10) | ||
| LOCATIONNAME | VARCHAR2 | (81) | ||
| MINIMUMALLOWEDQUANTITY | VARCHAR2 | (150) | ||
| MAXIMUMALLOWEDQUANTITY | VARCHAR2 | (150) | ||
| COMMENTS | VARCHAR2 | (240) | ||
| ATTRIBUTECATEGORY | VARCHAR2 | (30) | ||
| ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ATTRIBUTE15 | VARCHAR2 | (150) | ||
| FROMENDITEMUNITNUMBER | VARCHAR2 | (30) | ||
| NEWFROMENDITEMUNITNUMBER | VARCHAR2 | (30) | ||
| TOENDITEMUNITNUMBER | VARCHAR2 | (30) | ||
| ORIGINALSYSTEMREFERENCE | VARCHAR2 | (50) | ||
| DELETEGROUPNAME | VARCHAR2 | (10) | ||
| DGDESCRIPTION | VARCHAR2 | (240) | ||
| ENFORCEINTREQUIREMENTS | VARCHAR2 | (80) | ||
| SUGGESTEDVENDORNAME | VARCHAR2 | (240) | ||
| UNITPRICE | VARCHAR2 | (150) | ||
| BASISTYPE | NUMBER |
BOM.BOM_INVENTORY_COMPONENTS_TEMP does not reference any database object
BOM.BOM_INVENTORY_COMPONENTS_TEMP is referenced by following:
| Description: | Bill of material components |
|---|
Used by Delete Group program to archive deleted components.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_SEQ_NUM | NUMBER | Y | Operation sequence number | |
| COMPONENT_ITEM_ID | NUMBER | Y | Component item identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ITEM_NUM | NUMBER | Item sequence within bill of material structure | ||
| COMPONENT_QUANTITY | NUMBER | Y | Quantity of component in bill of material | |
| COMPONENT_YIELD_FACTOR | NUMBER | Y | Factor used to multiply component quantity with to obtain required component quantity | |
| COMPONENT_REMARKS | VARCHAR2 | (240) | Component remarks | |
| EFFECTIVITY_DATE | DATE | Y | Effective date | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| IMPLEMENTATION_DATE | DATE | Date on which engineering change order was implemented | ||
| DISABLE_DATE | DATE | Disable date | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PLANNING_FACTOR | NUMBER | Y | Factor used to multiply component quantity with to obtain planning quantity | |
| QUANTITY_RELATED | NUMBER | Y | Identifier to indicate if this component has quantity related reference designators | |
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Management to determine how many units of component to put on an order | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | Y | Flag indicating if this component is to be used when rolling up costs | |
| CHECK_ATP | NUMBER | Y | Flag indicating if ATP check is required | |
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to ship | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is displayed on shipping documents | ||
| INCLUDE_ON_BILL_DOCS | NUMBER | (not currently used) | ||
| LOW_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| HIGH_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| ACD_TYPE | NUMBER | Add, change, or disable code for component on an engineering change order | ||
| OLD_COMPONENT_SEQUENCE_ID | NUMBER | Identifier of original component row an ECO affects | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| WIP_SUPPLY_TYPE | NUMBER | WIP supply type code | ||
| PICK_COMPONENTS | NUMBER | (not currently used) | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator identifier | ||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Operation offset from first operation in routing (Denormalized from corresponding column in BOM_OPERATION_SEQUNCES) | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Engineering change order revised item identifier | ||
| COST_FACTOR | NUMBER | (not currently used) | ||
| BOM_ITEM_TYPE | NUMBER | Y | Type of item (denormalized from BOM Item Type in MTL_SYSTEM_ITEMS) | |
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | From End Item Unit Number | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | To End Item Unit Number | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from | |
| ECO_FOR_PRODUCTION | NUMBER | Indicates if this component on an Engineering Change Order is only for WIP jobs | ||
| COMPONENT_ITEM_REVISION_ID | NUMBER | Item revision Identifier | ||
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Delete group name for the entity type you are deleting | |
| DG_DESCRIPTION | VARCHAR2 | (240) | Description of the delete group | |
| ENFORCE_INT_REQUIREMENTS | NUMBER | Enforce Integer Requirements | ||
| OPTIONAL_ON_MODEL | NUMBER | Flag indicating if component is optional on model bill (for ATO) | ||
| PARENT_BILL_SEQ_ID | NUMBER | Common bill sequence id of the model bill (for ATO) | ||
| MODEL_COMP_SEQ_ID | NUMBER | Component sequence identifier from model bill (for ATO) | ||
| PLAN_LEVEL | NUMBER | Plan level based on model bill (for ATO) | ||
| FROM_BILL_REVISION_ID | NUMBER | From Bill Revision Identifier | ||
| TO_BILL_REVISION_ID | NUMBER | To Bill Revision Identifier | ||
| AUTO_REQUEST_MATERIAL | VARCHAR2 | (1) | Auto Request Material | |
| SUGGESTED_VENDOR_NAME | VARCHAR2 | (240) | Suggested vendor name will be used for direct items for EAM BOMs | |
| VENDOR_ID | NUMBER | Suggested Vendor ID column | ||
| UNIT_PRICE | NUMBER | Unit Price for direct items used by EAM BOMs | ||
| OBJ_NAME | VARCHAR2 | (30) | Object Name | |
| PK1_VALUE | VARCHAR2 | (240) | Primary Key value | |
| PK2_VALUE | VARCHAR2 | (240) | Primary Key value | |
| PK3_VALUE | VARCHAR2 | (240) | Primary Key value | |
| PK4_VALUE | VARCHAR2 | (240) | Primary Key value | |
| PK5_VALUE | VARCHAR2 | (240) | Primary Key value | |
| FROM_END_ITEM_REV_ID | NUMBER | From End Item Revision Id | ||
| TO_END_ITEM_REV_ID | NUMBER | To End Item Revision Id | ||
| FROM_END_ITEM_STRC_REV_ID | NUMBER | From End Item Structure Revision Id | ||
| TO_END_ITEM_STRC_REV_ID | NUMBER | To End Item Structure Revision Id | ||
| OVERLAPPING_CHANGES | NUMBER | Overlapping Changes | ||
| FROM_END_ITEM_STRC_REV_CODE | VARCHAR2 | (30) | From end item structure revision code | |
| TO_END_ITEM_STRC_REV_CODE | VARCHAR2 | (30) | To end item structure revision code | |
| FROM_STRUCTURE_REVISION_CODE | VARCHAR2 | (30) | From structure revision code | |
| TO_STRUCTURE_REVISION_CODE | VARCHAR2 | (30) | To structure revision code | |
| FROM_MINOR_REVISION_ID | NUMBER | From Minor Revision Id | ||
| TO_OBJECT_REVISION_ID | NUMBER | To Object Revision Id | ||
| TO_MINOR_REVISION_ID | NUMBER | To Minor Revision Id | ||
| FROM_END_ITEM_MINOR_REV_ID | NUMBER | From End Item Minor Rev Id | ||
| TO_END_ITEM_MINOR_REV_ID | NUMBER | To End Item Minor Rev Id | ||
| FROM_OBJECT_REVISION_ID | NUMBER | From Object Revision Id | ||
| COMPONENT_MINOR_REVISION_ID | NUMBER | Component Minor Revision Id | ||
| BASIS_TYPE | NUMBER | Basis type identifier | ||
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common Component Sequence Id |
BOM.BOM_INVENTORY_COMPS_ARCHIVE does not reference any database object
BOM.BOM_INVENTORY_COMPS_ARCHIVE is referenced by following:
| Description: | Bill of material components interface data |
|---|
BOM_INVENTORY_COMPS_INTERFACE temporarily stores information about
bill of material components. This table is shared by the Bills of
Material and Engineering Change Order open interfaces.
.
This table contains user friendly columns which allow you to easily
enter your data as well as their corresponding foreign keys. The open
interfaces will derive column values you do not enter, after
performing the proper validation. For example, you enter the
ORGANIZATION_CODE and the open interfaces will fill in the
corresponding ORGANIZATION_ID for you.
.
Also, you can enter ASSEMBLY_ITEM_ID, ORGANIZATION_ID and
ALTERNATE_BOM_DESIGNATOR instead of BILL_SEQUENCE_ID. The open
interfaces will fill in the corresponding BILL_SEQUENCE_ID.
.
In addition, you can enter BILL_SEQUENCE_ID, COMPONENT_ITEM_ID,
OPERATION_SEQ_NUM, and EFFECTIVITY_DATE instead of
COMPONENT_SEQUENCE_ID. The open interfaces will fill in the
corresponding COMPONENT_SEQUENCE_ID.
.
You can enter one reference designator and one substitute
component for each component you enter. Oracle Bills of Material will
insert these records into the tables, BOM_REFERENCE_DESIGNATORS and
BOM_SUBSTITUTE_COMPONENTS, respectively.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_INV_COMPS_INTERFACE_U1 | UNIQUE | APPS_TS_INTERFACE | TRANSACTION_ID |
| BOM_INV_COMPS_INTERFACE_N1 | NONUNIQUE | APPS_TS_INTERFACE |
BILL_SEQUENCE_ID
EFFECTIVITY_DATE COMPONENT_ITEM_ID OPERATION_SEQ_NUM |
| BOM_INV_COMPS_INTERFACE_N2 | NONUNIQUE | APPS_TS_INTERFACE | COMPONENT_SEQUENCE_ID |
| BOM_INV_COMPS_INTERFACE_N3 | NONUNIQUE | APPS_TS_INTERFACE |
ORGANIZATION_ID
ASSEMBLY_ITEM_ID ALTERNATE_BOM_DESIGNATOR |
| BOM_INV_COMPS_INTERFACE_N4 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_NUMBER
ORGANIZATION_ID BOM_INVENTORY_COMPS_IFCE_KEY |
| BOM_INV_COMPS_INTERFACE_N5 | NONUNIQUE | APPS_TS_INTERFACE |
COMPONENT_ITEM_ID
REVISED_ITEM_SEQUENCE_ID |
| BOM_INV_COMPS_INTERFACE_N6 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_NUMBER
ORGANIZATION_CODE ALTERNATE_BOM_DESIGNATOR |
| BOM_INV_COMPS_INTERFACE_N7 | NONUNIQUE | APPS_TS_INTERFACE | ENG_CHANGES_IFCE_KEY |
| BOM_INV_COMPS_INTERFACE_N8 | NONUNIQUE | APPS_TS_INTERFACE |
PROCESS_FLAG
ORGANIZATION_ID TRANSACTION_ID |
| BOM_INV_COMPS_INTERFACE_N9 | NONUNIQUE | APPS_TS_INTERFACE |
BATCH_ID
COMP_SOURCE_SYSTEM_REFERENCE PARENT_SOURCE_SYSTEM_REFERENCE PROCESS_FLAG |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ITEM_NUM | NUMBER | Item sequence within bill of material structure | ||
| COMPONENT_QUANTITY | NUMBER | Quantity of component in bill of material | ||
| COMPONENT_YIELD_FACTOR | NUMBER | Factor used to multiply component quantity to obtain required component quantity | ||
| COMPONENT_REMARKS | VARCHAR2 | (240) | Component remarks | |
| EFFECTIVITY_DATE | DATE | Effective date | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| IMPLEMENTATION_DATE | DATE | Date on which engineering change order was implemented | ||
| DISABLE_DATE | DATE | Disable date | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PLANNING_FACTOR | NUMBER | Factor used to multiply component quantity with to obtain planning quantity | ||
| QUANTITY_RELATED | NUMBER | Identifier to indicate if this component has quantity related reference designators | ||
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Management to determine how many units of component to put on an order | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | Flag indicating if this component is to be used when rolling up costs | ||
| CHECK_ATP | NUMBER | Flag indicating if ATP check is required | ||
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to ship | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is displayed on shipping documents | ||
| LOW_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| HIGH_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| ACD_TYPE | NUMBER | Add, change, or disable code for component on an engineering change order | ||
| OLD_COMPONENT_SEQUENCE_ID | NUMBER | Identifier of original component row that an ECO affects | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| BILL_SEQUENCE_ID | NUMBER | Bill of material unique identifier | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| WIP_SUPPLY_TYPE | NUMBER | WIP supply type code | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator identifier | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Engineering change order revised item identifier | ||
| MODEL_COMP_SEQ_ID | NUMBER | Component sequence identifier from model bill (for ATO) | ||
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of manufactured assembly | ||
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Abbreviation for organization name | |
| COMPONENT_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated component item segments | |
| ASSEMBLY_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated bill item segments | |
| REVISED_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated revised item segments | |
| LOCATION_NAME | VARCHAR2 | (81) | Supply location name | |
| REFERENCE_DESIGNATOR | VARCHAR2 | (15) | Component reference designator | |
| SUBSTITUTE_COMP_ID | NUMBER | Inventory item identifier of the substitute component | ||
| SUBSTITUTE_COMP_NUMBER | VARCHAR2 | (240) | Concatenated item segments of the substitute component | |
| TRANSACTION_ID | NUMBER | Row identifier | ||
| PROCESS_FLAG | NUMBER | Row status | ||
| BOM_ITEM_TYPE | NUMBER | Type of item (denormalized from BOM Item Type in MTL_SYSTEM_ITEMS) | ||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Operation offset from first operation in routing (Denormalized from corresponding column in BOM_OPERATION_SEQUNCES) | ||
| COST_FACTOR | NUMBER | (not currently used) | ||
| INCLUDE_ON_BILL_DOCS | NUMBER | (not currently used) | ||
| PICK_COMPONENTS | NUMBER | (not currently used) | ||
| DDF_CONTEXT1 | VARCHAR2 | (30) | Used by Mass Change | |
| DDF_CONTEXT2 | VARCHAR2 | (30) | Used by Mass Change | |
| NEW_OPERATION_SEQ_NUM | NUMBER | Updated value for the operation_seq_num | ||
| OLD_OPERATION_SEQ_NUM | NUMBER | Operation sequence number in the original component record that an ECO affects | ||
| NEW_EFFECTIVITY_DATE | DATE | Updated value for the effectivity_date | ||
| OLD_EFFECTIVITY_DATE | DATE | Value of effective date in the original component record that an ECO affects | ||
| ASSEMBLY_TYPE | NUMBER | Assembly type of the parent bill | ||
| INTERFACE_ENTITY_TYPE | VARCHAR2 | (4) | Record used for Bill or ECO Open Interface: BILL, ECO | |
| TRANSACTION_TYPE | VARCHAR2 | (10) | Type of action: CREATE, UPDATE or DELETE | |
| BOM_INVENTORY_COMPS_IFCE_KEY | VARCHAR2 | (30) | User defined identifier that links rows pertaining to the same business object | |
| ENG_REVISED_ITEMS_IFCE_KEY | VARCHAR2 | (30) | User defined identifier for linking rows pertaining to the same business object | |
| ENG_CHANGES_IFCE_KEY | VARCHAR2 | (30) | User defined identifier to link rows corresponding to the same business object | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | To End Item Unit Number | |
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | From End Item Unit Number | |
| NEW_FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | From End Item Unit Number | |
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Delete group name for the entity type you are deleting | |
| DG_DESCRIPTION | VARCHAR2 | (240) | Description of the delete group | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from | |
| ENFORCE_INT_REQUIREMENTS | VARCHAR2 | (80) | Enforce Integer Requirements | |
| OPTIONAL_ON_MODEL | NUMBER | Flag indicating if component is optional on model bill (for ATO) | ||
| PARENT_BILL_SEQ_ID | NUMBER | Common bill sequence id of the model bill (for ATO) | ||
| PLAN_LEVEL | NUMBER | Plan level based on model bill (for ATO) | ||
| AUTO_REQUEST_MATERIAL | VARCHAR2 | (1) | Auomatically create move order for the material at work order release | |
| SUGGESTED_VENDOR_NAME | VARCHAR2 | (240) | Suggested vendor name will be used for direct items for EAM BOMs | |
| UNIT_PRICE | NUMBER | Unit Price for direct items used by EAM BOMs | ||
| NEW_REVISED_ITEM_REVISION | VARCHAR2 | (3) | New Revised Item Revision is one of the unique keys to identify a revised item of a change | |
| BASIS_TYPE | NUMBER | Basis type identifier | ||
| INVERSE_QUANTITY | NUMBER | Inverse Quantity of component in bill of material | ||
| OBJ_NAME | VARCHAR2 | (30) | Object Name | |
| PK1_VALUE | VARCHAR2 | (240) | Primary Key of Object | |
| PK2_VALUE | VARCHAR2 | (240) | Primary Key of Object | |
| PK3_VALUE | VARCHAR2 | (240) | Primary Key of Object | |
| PK4_VALUE | VARCHAR2 | (240) | Primary Key of Object | |
| PK5_VALUE | VARCHAR2 | (240) | Primary Key of Object | |
| FROM_OBJECT_REVISION_CODE | VARCHAR2 | (80) | From Object Revision Code | |
| FROM_OBJECT_REVISION_ID | NUMBER | From Object Revision Id | ||
| TO_OBJECT_REVISION_CODE | VARCHAR2 | (240) | To Object Revision Code | |
| TO_OBJECT_REVISION_ID | NUMBER | To Object Revision Id | ||
| FROM_MINOR_REVISION_CODE | VARCHAR2 | (240) | From Minor Revision Code | |
| FROM_MINOR_REVISION_ID | NUMBER | From Minor Revision Id | ||
| TO_MINOR_REVISION_CODE | VARCHAR2 | (240) | To Minor Revision Code | |
| TO_MINOR_REVISION_ID | NUMBER | To Minor Revision Id | ||
| FROM_END_ITEM_MINOR_REV_CODE | VARCHAR2 | (240) | From End Item Minor Rev Code | |
| FROM_END_ITEM_MINOR_REV_ID | NUMBER | From End Item Minor Rev Id | ||
| TO_END_ITEM_MINOR_REV_CODE | VARCHAR2 | (240) | To End Item Minor Rev Code | |
| TO_END_ITEM_MINOR_REV_ID | NUMBER | To End Item Minor Rev Id | ||
| RETURN_STATUS | VARCHAR2 | (1) | Return Status | |
| FROM_END_ITEM | VARCHAR2 | (240) | End Item Name | |
| FROM_END_ITEM_ID | NUMBER | End Item ID | ||
| FROM_END_ITEM_REV_CODE | VARCHAR2 | (240) | From end item revision code | |
| FROM_END_ITEM_REV_ID | NUMBER | From end item revision id | ||
| TO_END_ITEM_REV_CODE | VARCHAR2 | (240) | To end item revision code | |
| TO_END_ITEM_REV_ID | NUMBER | To end item revision id | ||
| COMPONENT_REVISION_CODE | VARCHAR2 | (240) | Holds the value of componnet revision code. This value will be used for adding fixed revision components. | |
| COMPONENT_REVISION_ID | NUMBER | Holds the value of componnet revision id. This value will be used for adding fixed revision components. | ||
| BATCH_ID | NUMBER | Batch Identifier for Data Load | ||
| COMP_SOURCE_SYSTEM_REFERENCE | VARCHAR2 | (240) | Component Source System Item Name | |
| COMP_SOURCE_SYSTEM_REFER_DESC | VARCHAR2 | (240) | Component Source System Item Description | |
| PARENT_SOURCE_SYSTEM_REFERENCE | VARCHAR2 | (240) | Parent Source System Item Name | |
| CATALOG_CATEGORY_NAME | VARCHAR2 | (240) | Item Catalog Category Name | |
| ITEM_CATALOG_GROUP_ID | NUMBER | Item Catalog Category Identifier | ||
| CHANGE_ID | NUMBER | Change Identifier | ||
| TEMPLATE_NAME | VARCHAR2 | (240) | Item Template Name | |
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (25) | Primary Unit of Measure | |
| ITEM_DESCRIPTION | VARCHAR2 | (240) | Item Description | |
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common Component Sequence Id | ||
| CHANGE_TRANSACTION_TYPE | VARCHAR2 | (10) | Change Management Transaction Type for Change Orders | |
| INTERFACE_TABLE_UNIQUE_ID | NUMBER | Interface Table Unique Id for Merge | ||
| PARENT_REVISION_CODE | VARCHAR2 | (240) | Parent Revision Code | |
| PARENT_REVISION_ID | NUMBER | Parent Revision Id | ||
| BUNDLE_ID | NUMBER | Bundle Id |
BOM.BOM_INVENTORY_COMPS_INTERFACE does not reference any database object
BOM.BOM_INVENTORY_COMPS_INTERFACE is referenced by following:
| Description: | Bill of material components temporary table |
|---|
BOM_INV_COMPONENTS_TEMP temporarily stores information about
bill of material components
This table contains user friendly columns which allow you to easily
enter your data as well as their corresponding foreign keys.
This table is for future use.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_INV_COMPONENTS_TEMP_N2 | NONUNIQUE | APPS_TS_INTERFACE | TRANSACTION_ID |
| BOM_INV_COMPONENTS_TEMP_N3 | NONUNIQUE | APPS_TS_INTERFACE |
TRANSACTION_GROUP_ID
TRANSACTION_ID ASSEMBLY_ITEM_NAME ORGANIZATION_CODE ALTERNATE_BOM_CODE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_GROUP_ID | NUMBER | Transaction group identifier | ||
| TRANSACTION_ID | NUMBER | Transaction identifier | ||
| ASSEMBLY_ITEM_NAME | VARCHAR2 | (81) | Concatenated bill item segments | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | Alternate designator code | |
| START_EFFECTIVE_DATE | DATE | Effective date | ||
| COMPONENT_ITEM_NAME | VARCHAR2 | (81) | Concatenated component item segments | |
| OPERATION_SEQUENCE_NUMBER | NUMBER | Operation sequence number | ||
| ITEM_SEQUENCE_NUMBER | NUMBER | Item sequence within bill of material structure | ||
| DISABLE_DATE | DATE | Disable date | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| LOCATION_NAME | VARCHAR2 | (81) | Supply location name | |
| PLANNING_PERCENT | NUMBER | Factor used to multiply component quantity with to obtain planning quantity | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| MINIMUM_ALLOWED_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| MAXIMUM_ALLOWED_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| WIP_SUPPLY_TYPE | NUMBER | WIP supply type code | ||
| QUANTITY_PER_ASSEMBLY | NUMBER | Quantity of component in bill of material | ||
| PROJECTED_YIELD | NUMBER | Factor used to multiply component quantity to obtain required component quantity | ||
| COMMENTS | VARCHAR2 | (240) | Component remarks | |
| QUANTITY_RELATED | NUMBER | Identifier to indicate if this component has quantity related reference designators | ||
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Management to determine how many units of component to put on an order | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill | ||
| MUTUALLY_EXCLUSIVE | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | Flag indicating if this component is to be used when rolling up costs | ||
| CHECK_ATP | NUMBER | Flag indicating if ATP check is required | ||
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to ship | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is displayed on shipping documents | ||
| NEW_EFFECTIVITY_DATE | DATE | Updated value for the effectivity_date | ||
| NEW_OPERATION_SEQUENCE_NUMBER | NUMBER | Updated value for the operation_seq_num | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | From End Item Unit Number | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | To End Item Unit Number | |
| TRANSACTION_TYPE | VARCHAR2 | (10) | Type of action: CREATE, UPDATE or DELETE | |
| RETURN_STATUS | VARCHAR2 | (1) | Return Status | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Delete group name | |
| DG_DESCRIPTION | VARCHAR2 | (240) | Delete group description | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from. |
BOM.BOM_INV_COMPONENTS_TEMP does not reference any database object
BOM.BOM_INV_COMPONENTS_TEMP is referenced by following:
| Description: | Structure Types Item Attachment Categories Association Table |
|---|
This table will store assciation information for Item Attachment Categories and Structure Types.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_ITEM_ATTACH_CATEGORY_U1 | UNIQUE | APPS_TS_TX_IDX |
STRUCTURE_TYPE_ID
ATTACH_CATEGORY_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| STRUCTURE_TYPE_ID | NUMBER | Y | BOM structure type identifier | |
| ATTACH_CATEGORY_ID | NUMBER | Y | Attachment category identifier | |
| CREATED_BY | NUMBER | Y | Standard WHO columns | |
| CREATION_DATE | DATE | Y | Standard WHO columns | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO columns | |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO columns | |
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO columns |
BOM.BOM_ITEM_ATTACH_CATEGORY_ASSOC does not reference any database object
BOM.BOM_ITEM_ATTACH_CATEGORY_ASSOC is referenced by following:
| Description: | Not currently used - to be used in future releases |
|---|
This table is not used in this release.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| LOCATION_TYPE | NUMBER | Y | Physical location type code | |
| LOCATION_ID | NUMBER | Y | Location code | |
| SUBINVENTORY_NAME | VARCHAR2 | (10) | Y | Subinventory name |
| LOCATOR_ID | NUMBER | Stock locator identifier | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | NUMBER | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
BOM.BOM_ITEM_BACKFLUSH_SUBINV does not reference any database object
BOM.BOM_ITEM_BACKFLUSH_SUBINV is referenced by following:
| Description: | Temporary list of data about reporting entities |
|---|
BOM_LISTS stores a list of items, bills, or routings that the list
builder (BMLFLX) generates for a range of items.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_LISTS_U1 | UNIQUE |
SEQUENCE_ID
ASSEMBLY_ITEM_ID ALTERNATE_DESIGNATOR | |
| BOM_LISTS_N1 | NONUNIQUE |
SEQUENCE_ID
ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_ID | NUMBER | List identifier | ||
| ASSEMBLY_ITEM_ID | NUMBER | Assembly item identifier | ||
| ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate bill/routing designator | |
| ASSEMBLY_TYPE | NUMBER | Indicates whether manufacturing or engineering assembly | ||
| CONC_FLEX_STRING | VARCHAR2 | (240) | Concatenated item flex segments | |
| ORGANIZATION_ID | NUMBER | Organization identifier |
BOM.BOM_LISTS does not reference any database object
BOM.BOM_LISTS is referenced by following:
| Description: | Temporary data for low level item codes |
|---|
BOM_LOW_LEVEL_CODES stores temporary data for cumulative rollup of
lead times. It also stores the exploded BOM structure for an assembly. The
value of LOW_LEVEL_CODE for an item (INVENTORY_ITEM_ID) determines
which level it is in the BOM structure. The cumulative lead time
(CUMULATIVE_TOTAL_LEAD_TIME), and cumulative manufacturing lead time
(CUM_MANUFACTURING_LEAD_TIME) are calculated for all make-items at
each BOM level.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_LOW_LEVEL_CODES_U1 | UNIQUE | APPS_TS_NOLOGGING |
ROLLUP_ID
INVENTORY_ITEM_ID LOW_LEVEL_CODE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROLLUP_ID | NUMBER | Y | Rollup identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Item identifier | |
| LOW_LEVEL_CODE | NUMBER | Y | Low Level Code | |
| CUMULATIVE_TOTAL_LEAD_TIME | NUMBER | Cumulative total lead time | ||
| CUM_MANUFACTURING_LEAD_TIME | NUMBER | Cumulative manufacturing lead time | ||
| PLANNING_MAKE_BUY_CODE | NUMBER | Planning Make buy code | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_LOW_LEVEL_CODES does not reference any database object
BOM.BOM_LOW_LEVEL_CODES is referenced by following:
| Description: | Matrix cell values for mixed model maps |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_MIXED_MODEL_MAP_CELLS.MIXED_MODEL_MAP_ID
BOM_MIXED_MODEL_MAP_CELLS.GROUP_NUMBER BOM_MIXED_MODEL_MAP_CELLS.SEQUENCE_ID |
BOM_MIXED_MODEL_MAP_PROCESSES |
BOM_MIXED_MODEL_MAP_CELLS contains the matrix cell values for mixed
model maps. The cell values include product, demand, machine time,
labor time, total time, and process volume.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_MIXED_MODEL_MAP_CELLS_U1 | UNIQUE | APPS_TS_TX_IDX |
MIXED_MODEL_MAP_ID
GROUP_NUMBER SEQUENCE_ID PRODUCT_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| MIXED_MODEL_MAP_ID | NUMBER | Y | Mixed Model Map identifier | |
| GROUP_NUMBER | NUMBER | Y | Processes in a Mixed Model Map are grouped together in sets of 5. This column shows in which set the process exists. | |
| SEQUENCE_ID | NUMBER | Y | Specifies whether process is displayed in position 1, 2, 3, 4 or 5 within the group | |
| PRODUCT_ITEM_ID | NUMBER | Y | Product item identifier | |
| DEMAND | NUMBER | Y | Amount of demand for the product | |
| MACHINE_TIME | NUMBER | Amount of machine time used in a process | ||
| LABOR_TIME | NUMBER | Amount of labor time used in a process | ||
| TOTAL_TIME | NUMBER | Amount of total time used in a process | ||
| PROCESS_VOLUME | NUMBER | Process volume in a process | ||
| CREATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_MIXED_MODEL_MAP_CELLS does not reference any database object
BOM.BOM_MIXED_MODEL_MAP_CELLS is referenced by following:
| Description: | Header information for a mixed model map |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_MIXED_MODEL_MAP_HEADER.FAMILY_ITEM_ID
BOM_MIXED_MODEL_MAP_HEADER.ORGANIZATION_ID |
MTL_SYSTEM_ITEMS_B |
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_MIXED_MODEL_MAP_PROCESSES.MIXED_MODEL_MAP_ID | BOM_MIXED_MODEL_MAP_HEADER |
BOM_MIXED_MODEL_MAP_HEADER stores the header information for a mixed
model map. This includes the line, product family, demand, and
various display options.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_MIXED_MODEL_MAP_HEADER_U1 | UNIQUE | APPS_TS_TX_IDX | MIXED_MODEL_MAP_ID |
| BOM_MIXED_MODEL_MAP_HEADER_U2 | UNIQUE | APPS_TS_TX_IDX |
LINE_ID
FAMILY_ITEM_ID ORGANIZATION_ID PROCESS_OR_LINEOP |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| MIXED_MODEL_MAP_ID | NUMBER | Y | Unique identifier for a mixed model map | |
| LINE_ID | NUMBER | Y | Line identifier | |
| FAMILY_ITEM_ID | NUMBER | Product Family item identifier | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| DEMAND_TYPE | NUMBER | Y | Type of demand. Options include Forecast, MPS or MDS. | |
| DEMAND_CODE | VARCHAR2 | (30) | Name of the Forecast, MDS or MPS | |
| START_DATE | DATE | Y | Beginning date used in the Mixed Model Map generation | |
| END_DATE | DATE | Y | End date used in the Mixed Model Map generation | |
| DEMAND_DAYS | NUMBER | Y | Number of working days available | |
| HOURS_PER_DAY | NUMBER | Y | Number of hours available per day | |
| BOOST_PERCENT | NUMBER | Boost percentage | ||
| PROCESS_OR_LINEOP | NUMBER | Y | Option to view either processes or line operations. One represents Process and two represents Line Operation. | |
| SORT_ORDER | NUMBER | Y | Option to order processes or line operations. One represents By Display Sequence and two represents By Code. | |
| TIME_TYPE | NUMBER | Y | Option which determines what Labor, Machine, and Total Times to pick up from the flow routing. One represents Rolled-Up Time and two represents User Entered. | |
| IPK_VALUE | NUMBER | Y | Option which determines how IPKs needed is calculated. One represents Total and two represents By Machine. | |
| TIME_UOM | NUMBER | Y | Option which determines what unit of measure to display the time values in. One represents Hour, two represents Minute, and three represents Second. | |
| SAVE_FLAG | NUMBER | Y | Determines whether header is saved to the database. One represents Yes and two represents No. | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_MIXED_MODEL_MAP_HEADER does not reference any database object
BOM.BOM_MIXED_MODEL_MAP_HEADER is referenced by following:
| Description: | Processes or line operations and summary information for mixed model maps |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_MIXED_MODEL_MAP_PROCESSES.MIXED_MODEL_MAP_ID | BOM_MIXED_MODEL_MAP_HEADER |
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_MIXED_MODEL_MAP_CELLS.MIXED_MODEL_MAP_ID
BOM_MIXED_MODEL_MAP_CELLS.GROUP_NUMBER BOM_MIXED_MODEL_MAP_CELLS.SEQUENCE_ID |
BOM_MIXED_MODEL_MAP_PROCESSES |
BOM_MIXED_MODEL_MAP_PROCESSES contains processes or line operations
and summary information for mixed model maps.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_MIXED_MODEL_MAP_U1 | UNIQUE | APPS_TS_TX_IDX |
MIXED_MODEL_MAP_ID
GROUP_NUMBER SEQUENCE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| MIXED_MODEL_MAP_ID | NUMBER | Y | Mixed Model Map identifier | |
| GROUP_NUMBER | NUMBER | Y | Processes in a Mixed Model Map are grouped together in sets of 5. This group number represents in which set the process exists. | |
| SEQUENCE_ID | NUMBER | Y | Specifies whether process is displayed in position 1, 2, 3, 4 or 5 within the group | |
| OPERATION_CODE | VARCHAR2 | (4) | Y | Either the Process or Line Op name |
| MACHINE_WEIGHTED_TIME | NUMBER | Weighted machine time for a process | ||
| LABOR_WEIGHTED_TIME | NUMBER | Weighted labor time for a process | ||
| TOTAL_WEIGHTED_TIME | NUMBER | Weighted total time for a process | ||
| MACHINES_NEEDED | NUMBER | Number of machines needed in a process | ||
| MACHINES_ASSIGNED | NUMBER | Number of machines assigned to a process | ||
| MACHINES_NEEDED_DELTA | NUMBER | The difference between the Machines Needed for the current map and the baseline map | ||
| LABOR_NEEDED | NUMBER | Number of labor resources needed | ||
| LABOR_ASSIGNED | NUMBER | Number of labor resources assigned | ||
| LABOR_NEEDED_DELTA | NUMBER | The change between the labor needed for the current map and the baseline map | ||
| TAKT_TIME | NUMBER | Calculated time for a process or line operation | ||
| TAKT_TIME_FOR_ASSIGNED | NUMBER | Time calculated from assigned machines or labor for a process or line operation | ||
| IN_PROCESS_KANBAN | NUMBER | IPKs needed for a process | ||
| IN_PROCESS_KANBAN_DELTA | NUMBER | The change between the IPKs needed in the current map and the baseline map | ||
| CREATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_MIXED_MODEL_MAP_PROCESSES does not reference any database object
BOM.BOM_MIXED_MODEL_MAP_PROCESSES is referenced by following:
| Description: | Resources information of all the resources at a line operation/process for mixed model maps |
|---|
BOM_MIXED_MODEL_MAP_RES contains information of resources
for mixed model maps.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_MIXED_MODEL_MAP_RES_N1 | NONUNIQUE | APPS_TS_TX_IDX | MIXED_MODEL_MAP_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| MIXED_MODEL_MAP_ID | NUMBER | Y | Mixed model map internal identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| RESOURCE_CODE | VARCHAR2 | (10) | Resouce code | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| ACTIVITY | VARCHAR2 | (10) | Activity name | |
| STANDARD_OPERATION_ID | NUMBER | Standard operation unique identifier | ||
| OPERATION_CODE | VARCHAR2 | (4) | Operation code | |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| RESOURCE_TYPE | NUMBER | Resource type | ||
| RESOURCE_NEEDED | NUMBER | Resource needed for the operation |
BOM.BOM_MIXED_MODEL_MAP_RES does not reference any database object
BOM.BOM_MIXED_MODEL_MAP_RES is referenced by following:
| Description: | Routings |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_OPERATIONAL_ROUTINGS.ALTERNATE_ROUTING_DESIGNATOR
BOM_OPERATIONAL_ROUTINGS.ORGANIZATION_ID |
BOM_ALTERNATE_DESIGNATORS |
|
BOM_OPERATIONAL_ROUTINGS.COMMON_ASSEMBLY_ITEM_ID
BOM_OPERATIONAL_ROUTINGS.ORGANIZATION_ID |
MTL_SYSTEM_ITEMS_B |
|
BOM_OPERATIONAL_ROUTINGS.ASSEMBLY_ITEM_ID
BOM_OPERATIONAL_ROUTINGS.ORGANIZATION_ID |
MTL_SYSTEM_ITEMS_B |
| BOM_OPERATIONAL_ROUTINGS.COMMON_ROUTING_SEQUENCE_ID | BOM_OPERATIONAL_ROUTINGS |
|
BOM_OPERATIONAL_ROUTINGS.COMPLETION_SUBINVENTORY
BOM_OPERATIONAL_ROUTINGS.ORGANIZATION_ID |
MTL_SECONDARY_INVENTORIES |
|
BOM_OPERATIONAL_ROUTINGS.COMPLETION_LOCATOR_ID
BOM_OPERATIONAL_ROUTINGS.ORGANIZATION_ID |
MTL_ITEM_LOCATIONS |
| BOM_OPERATIONAL_ROUTINGS.LINE_ID | WIP_LINES |
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_DELETE_ENTITIES.ROUTING_SEQUENCE_ID | BOM_OPERATIONAL_ROUTINGS |
| BOM_OPERATIONAL_ROUTINGS.COMMON_ROUTING_SEQUENCE_ID | BOM_OPERATIONAL_ROUTINGS |
| BOM_OPERATION_SEQUENCES.ROUTING_SEQUENCE_ID | BOM_OPERATIONAL_ROUTINGS |
| WIP_DISCRETE_JOBS.COMMON_ROUTING_SEQUENCE_ID | BOM_OPERATIONAL_ROUTINGS |
|
WIP_JOB_SCHEDULE_INTERFACE.PRIMARY_ITEM_ID
WIP_JOB_SCHEDULE_INTERFACE.ORGANIZATION_ID WIP_JOB_SCHEDULE_INTERFACE.ALTERNATE_ROUTING_DESIGNATOR |
BOM_OPERATIONAL_ROUTINGS |
|
WIP_FLOW_SCHEDULES.PRIMARY_ITEM_ID
WIP_FLOW_SCHEDULES.ORGANIZATION_ID WIP_FLOW_SCHEDULES.ALTERNATE_ROUTING_DESIGNATOR |
BOM_OPERATIONAL_ROUTINGS |
|
WIP_REPETITIVE_ITEMS.PRIMARY_ITEM_ID
WIP_REPETITIVE_ITEMS.ORGANIZATION_ID WIP_REPETITIVE_ITEMS.ALTERNATE_ROUTING_DESIGNATOR |
BOM_OPERATIONAL_ROUTINGS |
| WIP_REPETITIVE_SCHEDULES.COMMON_ROUTING_SEQUENCE_ID | BOM_OPERATIONAL_ROUTINGS |
|
WSM_LOT_JOB_INTERFACE.PRIMARY_ITEM_ID
WSM_LOT_JOB_INTERFACE.ORGANIZATION_ID WSM_LOT_JOB_INTERFACE.ALTERNATE_ROUTING_DESIGNATOR |
BOM_OPERATIONAL_ROUTINGS |
BOM_OPERATIONAL_ROUTINGS stores information about manufacturing
and engineering routings.
.
If a routing shares its operation steps with another routing in the
same organization, COMMON_ROUTING_SEQUENCE_ID is a reference to that
common routing This is a mandatory column that equals
ROUTING_SEQUENCE_ID if there is no common reference If the routing
references a common routing, Oracle Bills of Materials populates the
INVENTORY_ITEM_ID of the common into COMMON_ASSEMBLY_ITEM_ID
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_OPERATIONAL_ROUTINGS_U1 | UNIQUE | APPS_TS_TX_IDX | ROUTING_SEQUENCE_ID |
| BOM_OPERATIONAL_ROUTINGS_U2 | UNIQUE | APPS_TS_TX_IDX |
ASSEMBLY_ITEM_ID
ORGANIZATION_ID ALTERNATE_ROUTING_DESIGNATOR |
| BOM_OPERATIONAL_ROUTINGS_N1 | NONUNIQUE | APPS_TS_TX_IDX | COMMON_ROUTING_SEQUENCE_ID |
| BOM_OPERATIONAL_ROUTINGS_N2 | NONUNIQUE | APPS_TS_TX_IDX |
LINE_ID
ORGANIZATION_ID CTP_FLAG |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROUTING_SEQUENCE_ID | NUMBER | Y | Routing unique identifier | |
| ASSEMBLY_ITEM_ID | NUMBER | Y | Inventory item identifier of manufactured assembly | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ALTERNATE_ROUTING_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ROUTING_TYPE | NUMBER | Y | Routing type: 2=Engineering routing 1=Manufacturing routing | |
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of common assembly | ||
| COMMON_ROUTING_SEQUENCE_ID | NUMBER | Y | Routing identifier of common routing | |
| ROUTING_COMMENT | VARCHAR2 | (240) | Specific comment about routing | |
| COMPLETION_SUBINVENTORY | VARCHAR2 | (10) | Destination subinventory for assembly | |
| COMPLETION_LOCATOR_ID | NUMBER | Destination location for assembly | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| LINE_ID | NUMBER | Unique identifier from WIP Lines used in Flow Manufacturing | ||
| CFM_ROUTING_FLAG | NUMBER | Continous flow or traditional routing | ||
| MIXED_MODEL_MAP_FLAG | NUMBER | Use this routing in Mixed Model Map calculation | ||
| PRIORITY | NUMBER | For information only | ||
| TOTAL_PRODUCT_CYCLE_TIME | NUMBER | Total time that an assembly takes along the primary path in the operation network, calculated by Flow Manufacturing | ||
| CTP_FLAG | NUMBER | Flag indicating capacity must be checked when item is ordered | ||
| PROJECT_ID | NUMBER | Project identifier for Project Manufacturing | ||
| TASK_ID | NUMBER | Task identifier for Project Manufacturing | ||
| PENDING_FROM_ECN | VARCHAR2 | (10) | Pending From Ecn | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original System Reference | |
| SERIALIZATION_START_OP | NUMBER | Serialization Starting Operation Sequence Number for standard routings |
BOM.BOM_OPERATIONAL_ROUTINGS does not reference any database object
BOM.BOM_OPERATIONAL_ROUTINGS is referenced by following:
| Description: | Routing operation networks |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_OPERATION_NETWORKS.TO_OP_SEQ_ID | BOM_OPERATION_SEQUENCES |
BOM_OPERATION_NETWORKS stores information about routing
networks. The routing network is defined for processes or line
operations. Each row in this table represents the connection
between two processes or line operations. The column TRANSITION_TYPE
stores the type of connection between two processes or line
operations. The connection type can be Primary, Alternate, or Rework.
The column PLANNING_PCT stores the planning percent for a connection.
This table is populated by the Flow Routings window.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_OPERATION_NETWORKS_U1 | UNIQUE | APPS_TS_TX_IDX |
FROM_OP_SEQ_ID
TO_OP_SEQ_ID |
| BOM_OPERATION_NETWORKS_N1 | NONUNIQUE | APPS_TS_TX_IDX | TO_OP_SEQ_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| FROM_OP_SEQ_ID | NUMBER | Y | From routing operation identifier | |
| TO_OP_SEQ_ID | NUMBER | Y | To routing operation identifier | |
| TRANSITION_TYPE | NUMBER | Primary, Alternate or Rework connection | ||
| PLANNING_PCT | NUMBER | Planning Percentage | ||
| EFFECTIVITY_DATE | DATE | Effective Date | ||
| DISABLE_DATE | DATE | Disable Date | ||
| CREATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system reference | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_OPERATION_NETWORKS does not reference any database object
BOM.BOM_OPERATION_NETWORKS is referenced by following:
| Description: | Resources on operations |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_OPERATION_RESOURCES.ACTIVITY_ID | CST_ACTIVITIES |
| BOM_OPERATION_RESOURCES.OPERATION_SEQUENCE_ID | BOM_OPERATION_SEQUENCES |
| Foreign Key Column | Foreign Table |
|---|---|
|
CRP_RESOURCE_HOURS.OPERATION_SEQUENCE_ID
CRP_RESOURCE_HOURS.RESOURCE_SEQ_NUM |
BOM_OPERATION_RESOURCES |
BOM_OPERATION_RESOURCES stores information about resources that you
require to complete operations on routings. You may assign multiple
resources or assign the same resource multiple times at any operation.
.
The manufacturing lead time process calculates
RESOURCE_OFFSET_PERCENT. You may override the value in the Define
Routing window. CRP will use this value to calculate resource
availability. If you re-run the manufacturing lead time process, it
will recalculate and update RESOURCE_OFFSET_PERCENT for scheduling.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_OPERATION_RESOURCES_U2 | UNIQUE | APPS_TS_TX_IDX |
OPERATION_SEQUENCE_ID
RESOURCE_SEQ_NUM ACD_TYPE BASIS_TYPE |
| BOM_OPERATION_RESOURCES_N1 | NONUNIQUE | APPS_TS_TX_IDX | RESOURCE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_SEQUENCE_ID | NUMBER | Y | Routing operation unique identifier | |
| RESOURCE_SEQ_NUM | NUMBER | Y | Resource sequence number | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| STANDARD_RATE_FLAG | NUMBER | Y | Use standard rate for shopfloor transactions | |
| ASSIGNED_UNITS | NUMBER | Y | Resource units assigned | |
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Resource usage rate | |
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Y | Resource usage rate inverse | |
| BASIS_TYPE | NUMBER | Y | Basis type identifier | |
| SCHEDULE_FLAG | NUMBER | Y | Schedule the resource | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| RESOURCE_OFFSET_PERCENT | NUMBER | Resource offset percent from the start of the routing | ||
| AUTOCHARGE_TYPE | NUMBER | Y | Autocharge type for shopfloor moves | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| SCHEDULE_SEQ_NUM | NUMBER | Scheduling sequence number | ||
| SUBSTITUTE_GROUP_NUM | NUMBER | Substitute group number | ||
| PRINCIPLE_FLAG | NUMBER | Principle Flag | ||
| SETUP_ID | NUMBER | Setup Type unque identifier | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Change Notice | |
| ACD_TYPE | NUMBER | Acd Type | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original System Reference |
BOM.BOM_OPERATION_RESOURCES does not reference any database object
BOM.BOM_OPERATION_RESOURCES is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
BOM_OPERATION_RESOURCES_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
BOM_OPERATION_RESOURCES prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Resource usage rate | |
| OPERATION_SEQUENCE_ID | NUMBER | Y | Sequence indicator | |
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Y | Inverse resource usage rate | |
| RESOURCE_SEQ_NUM | NUMBER | Y | Resource Sequence Number | |
| SET_OF_BOOKS_ID | NUMBER | Set of Books Identifier |
BOM.BOM_OPERATION_RESOURCES_EFC does not reference any database object
BOM.BOM_OPERATION_RESOURCES_EFC is referenced by following:
| Description: | Routing operations |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_OPERATION_SEQUENCES.DEPARTMENT_ID | BOM_DEPARTMENTS |
| BOM_OPERATION_SEQUENCES.ROUTING_SEQUENCE_ID | BOM_OPERATIONAL_ROUTINGS |
| BOM_OPERATION_SEQUENCES.PROCESS_OP_SEQ_ID | BOM_OPERATION_SEQUENCES |
| BOM_OPERATION_SEQUENCES.LINE_OP_SEQ_ID | BOM_OPERATION_SEQUENCES |
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_COMPONENT_OPERATIONS.OPERATION_SEQUENCE_ID | BOM_OPERATION_SEQUENCES |
| BOM_DELETE_SUB_ENTITIES.OPERATION_SEQUENCE_ID | BOM_OPERATION_SEQUENCES |
| BOM_OPERATION_NETWORKS.TO_OP_SEQ_ID | BOM_OPERATION_SEQUENCES |
| BOM_OPERATION_RESOURCES.OPERATION_SEQUENCE_ID | BOM_OPERATION_SEQUENCES |
| BOM_OPERATION_SEQUENCES.PROCESS_OP_SEQ_ID | BOM_OPERATION_SEQUENCES |
| BOM_OPERATION_SEQUENCES.LINE_OP_SEQ_ID | BOM_OPERATION_SEQUENCES |
| CST_ITEM_COST_DETAILS.OPERATION_SEQUENCE_ID | BOM_OPERATION_SEQUENCES |
| CST_ITEM_CST_DTLS_INTERFACE.OPERATION_SEQUENCE_ID | BOM_OPERATION_SEQUENCES |
| WIP_OPERATIONS.OPERATION_SEQUENCE_ID | BOM_OPERATION_SEQUENCES |
BOM_OPERATION_SEQUENCES stores information about routing operations.
You may define multiple operations for a routing. You must specify
the department in which every operation will occur.
.
Oracle Bills of Material stores the STANDARD_OPERATION_ID if you use
a standard operation to define your operation.
.
You cannot have overlapping effective dates for the same operation.
The Define Routing window will prevent you from doing that. For
example, you cannot define operations as follows:
.
===
Op Effective Disable
Seq Date Date
--- --------- ---------
10 10-SEP-93 10-DEC-93
10 20-OCT-93
.
===
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_OPERATION_SEQUENCES_U1 | UNIQUE | APPS_TS_TX_IDX | OPERATION_SEQUENCE_ID |
| BOM_OPERATION_SEQUENCES_U2 | UNIQUE | APPS_TS_TX_IDX |
ROUTING_SEQUENCE_ID
OPERATION_TYPE OPERATION_SEQ_NUM EFFECTIVITY_DATE |
| BOM_OPERATION_SEQUENCES_N1 | NONUNIQUE | APPS_TS_TX_IDX | PROCESS_OP_SEQ_ID |
| BOM_OPERATION_SEQUENCES_N2 | NONUNIQUE | APPS_TS_TX_IDX | LINE_OP_SEQ_ID |
| BOM_OPERATION_SEQUENCES_N3 | NONUNIQUE | APPS_TS_TX_IDX | CHANGE_NOTICE |
| BOM_OPERATION_SEQUENCES_N4 | NONUNIQUE | APPS_TS_TX_IDX | MODEL_OP_SEQ_ID |
| BOM_OPERATION_SEQUENCES_N5 | NONUNIQUE | APPS_TS_TX_IDX | CONFIG_ROUTING_ID |
| BOM_OPERATION_SEQUENCES_N6 | NONUNIQUE | APPS_TS_TX_IDX |
STANDARD_OPERATION_ID
REFERENCE_FLAG |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_SEQUENCE_ID | NUMBER | Y | Routing operation unique identifier | |
| ROUTING_SEQUENCE_ID | NUMBER | Y | Routing unique identifier | |
| OPERATION_SEQ_NUM | NUMBER | Y | Operation sequence number | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| STANDARD_OPERATION_ID | NUMBER | Standard operation unique identifier | ||
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Indicates the amount of overlap its lead time has with the parent's lead time | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | Minimum operation transfer quantity | ||
| COUNT_POINT_TYPE | NUMBER | Y | Count point | |
| OPERATION_DESCRIPTION | VARCHAR2 | (240) | Description of operation | |
| EFFECTIVITY_DATE | DATE | Y | Date operation is effective | |
| DISABLE_DATE | DATE | Date operation is no longer effective - effectivity lasts until the end of the disable date | ||
| BACKFLUSH_FLAG | NUMBER | Y | Indicates whether operation requires backflushing | |
| OPTION_DEPENDENT_FLAG | NUMBER | Y | Indicates whether to use this operation in all configuration routings, even if no components of the configuration are used in this operation | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| OPERATION_TYPE | NUMBER | Process, Line Operation or Event | ||
| REFERENCE_FLAG | NUMBER | If the Standard Operation is referenced or copied then the operation can not be updated. | ||
| PROCESS_OP_SEQ_ID | NUMBER | Operation sequence identifier of parent process (applies only to events) | ||
| LINE_OP_SEQ_ID | NUMBER | Operation sequence identifier of the parent line operation - only applies to events | ||
| YIELD | NUMBER | Process yield at this operation | ||
| CUMULATIVE_YIELD | NUMBER | Cumulative process yield from begining of routing to this operation | ||
| REVERSE_CUMULATIVE_YIELD | NUMBER | Cumulative process yield from end of routing to comparable operation | ||
| LABOR_TIME_CALC | NUMBER | System calculated run time attributable to labor | ||
| MACHINE_TIME_CALC | NUMBER | System calculated run time attributable to machines | ||
| TOTAL_TIME_CALC | NUMBER | System calculated run time attributable to both labor and machines | ||
| LABOR_TIME_USER | NUMBER | User calculated run time attributable to labor | ||
| MACHINE_TIME_USER | NUMBER | User calculated run time attributable to machines | ||
| TOTAL_TIME_USER | NUMBER | User calculated run time attributable to both labor and machines | ||
| NET_PLANNING_PERCENT | NUMBER | Cumulative planning percents derived from the operation network | ||
| X_COORDINATE | NUMBER | X coordinate of the operation | ||
| Y_COORDINATE | NUMBER | Y coordinate of the operation | ||
| INCLUDE_IN_ROLLUP | NUMBER | Indicates whether operation yield is to be considered in cost rollup | ||
| OPERATION_YIELD_ENABLED | NUMBER | Indicates whether operation yield is to be considered during costing. | ||
| OLD_OPERATION_SEQUENCE_ID | NUMBER | Old Operation Sequence Id | ||
| ACD_TYPE | NUMBER | Acd Type | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Revised Item Sequence Id | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original System Reference | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change notice code (not currently used) | |
| IMPLEMENTATION_DATE | DATE | Date on which engineering change will be implemented (no longer used) | ||
| ECO_FOR_PRODUCTION | NUMBER | Indicates if this operation on an Engineering Change Order is only for WIP jobs | ||
| SHUTDOWN_TYPE | VARCHAR2 | (30) | Shutdown type | |
| ACTUAL_IPK | NUMBER | Actual In-Process Kanbans | ||
| CRITICAL_TO_QUALITY | VARCHAR2 | (1) | Critical to quality | |
| VALUE_ADDED | VARCHAR2 | (1) | Value Added | |
| MACHINE_PROCESS_EFFICIENCY | NUMBER | Used by Flow manufacturing for Process Efficiency calculations | ||
| LABOR_PROCESS_EFFICIENCY | NUMBER | Used by Flow manufacturing for Process Efficiency calculations | ||
| TOTAL_PROCESS_EFFICIENCY | NUMBER | Used by Flow manufacturing for Process Efficiency calculations | ||
| LONG_DESCRIPTION | VARCHAR2 | (4000) | Used by EAM routings | |
| CONFIG_ROUTING_ID | NUMBER | this columns denotes the corresponding model routing that this configuration routing operation is derrived from | ||
| MODEL_OP_SEQ_ID | NUMBER | this columns denotes the corresponding model routing operation that this configuration routing operation is derrived from | ||
| LOWEST_ACCEPTABLE_YIELD | NUMBER | Lowest Acceptable Yield | ||
| USE_ORG_SETTINGS | NUMBER | Use Organization Settings | ||
| QUEUE_MANDATORY_FLAG | NUMBER | Flag to set Queue intra-operation step mandatory. | ||
| RUN_MANDATORY_FLAG | NUMBER | Run mandatory flag | ||
| TO_MOVE_MANDATORY_FLAG | NUMBER | Move mandatory flag | ||
| SHOW_NEXT_OP_BY_DEFAULT | NUMBER | Show next operation by default. | ||
| SHOW_SCRAP_CODE | NUMBER | Show Scrap Code | ||
| SHOW_LOT_ATTRIB | NUMBER | Show lot attributes. | ||
| TRACK_MULTIPLE_RES_USAGE_DATES | NUMBER | Track Multiple Resource Usage Dates | ||
| CHECK_SKILL | NUMBER | CHECK SKILL |
BOM.BOM_OPERATION_SEQUENCES does not reference any database object
BOM.BOM_OPERATION_SEQUENCES is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_SEQUENCE_ID | NUMBER | Y | ||
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| OPERATION_SEQ_NUM | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_LOGIN | NUMBER | |||
| STANDARD_OPERATION_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | Y | ||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | |||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| COUNT_POINT_TYPE | NUMBER | Y | ||
| OPERATION_DESCRIPTION | VARCHAR2 | (240) | ||
| EFFECTIVITY_DATE | DATE | Y | ||
| DISABLE_DATE | DATE | |||
| BACKFLUSH_FLAG | NUMBER | Y | ||
| OPTION_DEPENDENT_FLAG | NUMBER | Y | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ATTRIBUTE15 | VARCHAR2 | (150) | ||
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE | |||
| OPERATION_TYPE | NUMBER | |||
| REFERENCE_FLAG | NUMBER | |||
| PROCESS_OP_SEQ_ID | NUMBER | |||
| LINE_OP_SEQ_ID | NUMBER | |||
| YIELD | NUMBER | |||
| CUMULATIVE_YIELD | NUMBER | |||
| REVERSE_CUMULATIVE_YIELD | NUMBER | |||
| LABOR_TIME_CALC | NUMBER | |||
| MACHINE_TIME_CALC | NUMBER | |||
| TOTAL_TIME_CALC | NUMBER | |||
| LABOR_TIME_USER | NUMBER | |||
| MACHINE_TIME_USER | NUMBER | |||
| TOTAL_TIME_USER | NUMBER | |||
| NET_PLANNING_PERCENT | NUMBER | |||
| X_COORDINATE | NUMBER | |||
| Y_COORDINATE | NUMBER | |||
| INCLUDE_IN_ROLLUP | NUMBER | |||
| OPERATION_YIELD_ENABLED | NUMBER | |||
| OLD_OPERATION_SEQUENCE_ID | NUMBER | |||
| ACD_TYPE | NUMBER | |||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | |||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | ||
| IMPLEMENTATION_DATE | DATE | |||
| ECO_FOR_PRODUCTION | NUMBER | |||
| SHUTDOWN_TYPE | VARCHAR2 | (30) | ||
| ACTUAL_IPK | NUMBER | |||
| CRITICAL_TO_QUALITY | VARCHAR2 | (1) | ||
| VALUE_ADDED | VARCHAR2 | (1) | ||
| MACHINE_PROCESS_EFFICIENCY | NUMBER | |||
| LABOR_PROCESS_EFFICIENCY | NUMBER | |||
| TOTAL_PROCESS_EFFICIENCY | NUMBER | |||
| LONG_DESCRIPTION | VARCHAR2 | (4000) | ||
| CONFIG_ROUTING_ID | NUMBER | |||
| MODEL_OP_SEQ_ID | NUMBER | |||
| LOWEST_ACCEPTABLE_YIELD | NUMBER | |||
| USE_ORG_SETTINGS | NUMBER | |||
| QUEUE_MANDATORY_FLAG | NUMBER | |||
| RUN_MANDATORY_FLAG | NUMBER | |||
| TO_MOVE_MANDATORY_FLAG | NUMBER | |||
| SHOW_NEXT_OP_BY_DEFAULT | NUMBER | |||
| SHOW_SCRAP_CODE | NUMBER | |||
| SHOW_LOT_ATTRIB | NUMBER | |||
| TRACK_MULTIPLE_RES_USAGE_DATES | NUMBER |
BOM.BOM_OPERATION_SEQUENCES_TEMP does not reference any database object
BOM.BOM_OPERATION_SEQUENCES_TEMP is referenced by following:
| Description: | Skills for Operations |
|---|
Skills for Operations
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_OPERATION_SKILLS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
STANDARD_OPERATION_ID
COMPETENCE_ID RATING_LEVEL_ID QUALIFICATION_TYPE_ID |
| BOM_OPERATION_SKILLS_N2 | NONUNIQUE | APPS_TS_TX_IDX |
OPERATION_SEQUENCE_ID
COMPETENCE_ID RATING_LEVEL_ID QUALIFICATION_TYPE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEVEL_ID | NUMBER | Y | Level Id | |
| ORGANIZATION_ID | NUMBER | Y | Organization Id | |
| OPERATION_SEQUENCE_ID | NUMBER | Operation Sequence Id | ||
| STANDARD_OPERATION_ID | NUMBER | STANDARD_OPERATION_ID | ||
| RESOURCE_ID | NUMBER | RESOURCE_ID | ||
| COMPETENCE_ID | NUMBER | COMPETENCE_ID | ||
| RATING_LEVEL_ID | NUMBER | RATING_LEVEL_ID | ||
| QUALIFICATION_TYPE_ID | NUMBER | QUALIFICATION_TYPE_ID | ||
| LAST_UPDATE_DATE | DATE | Y | LAST_UPDATE_DATE | |
| LAST_UPDATED_BY | NUMBER | Y | LAST_UPDATED_BY | |
| LAST_UPDATE_LOGIN | NUMBER | LAST_UPDATE_LOGIN | ||
| CREATED_BY | NUMBER | Y | CREATED_BY | |
| CREATION_DATE | DATE | Y | CREATION_DATE |
BOM.BOM_OPERATION_SKILLS does not reference any database object
BOM.BOM_OPERATION_SKILLS is referenced by following:
| Description: | Operation networks interface data |
|---|
BOM_OP_NETWORKS_INTERFACE temporarily stores information about
operation networks that you may require to complete operations on flow routings. This
table contains user friendly columns which allow you to easily enter
your data as well as their corresponding foreign keys. Oracle Bills of
Material will derive column values you do not enter, after performing
the proper validation. For example, you enter the ORGANIZATION_CODE
and Oracle Bills of Material will fill in the corresponding
ORGANIZATION_ID for you.
.
Also, you can enter ROUTING_SEQUENCE_ID, FROM_OP_SEQ_NUMBER, and
EFFECTIVITY_DATE instead of FROM_OP_SEQ_ID. Oracle Bills of
Material will fill in the corresponding FROM_OP_SEQ_ID.
.
In addition, you can enter ASSEMBLY_ITEM_ID, ORGANIZATION_ID and
ALTERNATE_ROUTING_DESIGNATOR instead of ROUTING_SEQUENCE_ID. Oracle
Bills of Material will fill in the corresponding ROUTING_SEQUENCE_ID.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_OP_NETWORKS_INTERFACE_N2 | NONUNIQUE | APPS_TS_INTERFACE | BATCH_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| FROM_OP_SEQ_ID | NUMBER | From operation network unique identifier | ||
| TO_OP_SEQ_ID | NUMBER | To operation network unique identifier | ||
| TRANSITION_TYPE | NUMBER | Primary, Alternate or Rework connection | ||
| PLANNING_PCT | NUMBER | Planning percentage | ||
| OPERATION_TYPE | NUMBER | Process, Line Operation or Event | ||
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| FROM_X_COORDINATE | NUMBER | From X coordinate of Operation | ||
| TO_X_COORDINATE | NUMBER | To X coordinate of Operation | ||
| FROM_Y_COORDINATE | NUMBER | From Y coordinate of Operation | ||
| TO_Y_COORDINATE | NUMBER | To Y coordinate of Operation | ||
| FROM_OP_SEQ_NUMBER | NUMBER | From Routing Operation Sequence Number | ||
| TO_OP_SEQ_NUMBER | NUMBER | To Routing Operation Sequence Number | ||
| FROM_START_EFFECTIVE_DATE | DATE | Effectivity Date for from operation | ||
| TO_START_EFFECTIVE_DATE | DATE | Effectivity Date for to operation | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| NEW_FROM_OP_SEQ_NUMBER | NUMBER | New From Operation Sequence Number | ||
| NEW_TO_OP_SEQ_NUMBER | NUMBER | New To Operation Sequence Number | ||
| NEW_FROM_START_EFFECTIVE_DATE | DATE | New Effectivity Date for from operation | ||
| NEW_TO_START_EFFECTIVE_DATE | DATE | New Effectivity Date for from operation | ||
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of manufactured assembly | ||
| ALTERNATE_ROUTING_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| ROUTING_SEQUENCE_ID | NUMBER | Routing unique identifier | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Abbreviation of organization name | |
| ASSEMBLY_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated item segments | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system reference | |
| TRANSACTION_ID | NUMBER | Row identifier | ||
| PROCESS_FLAG | NUMBER | Row status | ||
| TRANSACTION_TYPE | VARCHAR2 | (10) | Create, Update, or Delete | |
| REQUEST_ID | NUMBER | Request id | ||
| BATCH_ID | NUMBER | Batch Id |
BOM.BOM_OP_NETWORKS_INTERFACE does not reference any database object
BOM.BOM_OP_NETWORKS_INTERFACE is referenced by following:
| Description: | Archive of deleted resources on operations |
|---|
Used by the Delete Group program to archive deleted operation
resources. This only contains rows deleted as a result of a cascade
delete on operations.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_SEQUENCE_ID | NUMBER | Y | Routing operation unique identifier | |
| RESOURCE_SEQ_NUM | NUMBER | Y | Resource sequence number | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| STANDARD_RATE_FLAG | NUMBER | Y | Use standard rate for shopfloor transactions | |
| ASSIGNED_UNITS | NUMBER | Y | Resource units assigned | |
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Resource usage rate | |
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Y | Resource usage rate inverse | |
| BASIS_TYPE | NUMBER | Y | Basis type identifier | |
| SCHEDULE_FLAG | NUMBER | Y | Schedule the resource | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| RESOURCE_OFFSET_PERCENT | NUMBER | Resource offset percent from the start of the routing | ||
| AUTOCHARGE_TYPE | NUMBER | Y | Autocharge type for shopfloor moves | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| SCHEDULE_SEQ_NUM | NUMBER | Schedule Sequence Number | ||
| SUBSTITUTE_GROUP_NUM | NUMBER | Substitute Group Number | ||
| PRINCIPLE_FLAG | NUMBER | Principal Flag | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Change Notice | |
| ACD_TYPE | NUMBER | ACD Type | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original System Reference | |
| SETUP_ID | NUMBER |
BOM.BOM_OP_RESOURCES_ARCHIVE does not reference any database object
BOM.BOM_OP_RESOURCES_ARCHIVE is referenced by following:
| Description: | Operation resources interface data |
|---|
BOM_OP_RESOURCES_INTERFACE temporarily stores information about
resources that you require to complete operations on routings. This
table contains user friendly columns which allow you to easily enter
your data as well as their corresponding foreign keys. Oracle Bills of
Material will derive column values you do not enter, after performing
the proper validation. For example, you enter the ORGANIZATION_CODE
and Oracle Bills of Material will fill in the corresponding
ORGANIZATION_ID for you.
.
Also, you can enter ROUTING_SEQUENCE_ID, OPERATION_SEQ_NUM, and
EFFECTIVITY_DATE instead of OPERATION_SEQUENCE_ID. Oracle Bills of
Material will fill in the corresponding OPERATION_SEQUENCE_ID.
.
In addition, you can enter ASSEMBLY_ITEM_ID, ORGANIZATION_ID and
ALTERNATE_ROUTING_DESIGNATOR instead of ROUTING_SEQUENCE_ID. Oracle
Bills of Material will fill in the corresponding ROUTING_SEQUENCE_ID.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_OP_RESOURCES_INTERFACE_N1 | NONUNIQUE | APPS_TS_INTERFACE |
OPERATION_SEQUENCE_ID
RESOURCE_SEQ_NUM |
| BOM_OP_RESOURCES_INTERFACE_N2 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_ID
ORGANIZATION_ID ALTERNATE_ROUTING_DESIGNATOR |
| BOM_OP_RESOURCES_INTERFACE_N3 | NONUNIQUE | APPS_TS_INTERFACE | TRANSACTION_ID |
| BOM_OP_RESOURCES_INTERFACE_N4 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_NUMBER
ORGANIZATION_ID |
| BOM_OP_RESOURCES_INTERFACE_N5 | NONUNIQUE | APPS_TS_INTERFACE | ENG_CHANGES_IFCE_KEY |
| BOM_OP_RESOURCES_INTERFACE_N6 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_NUMBER
ORGANIZATION_CODE ALTERNATE_ROUTING_DESIGNATOR |
| BOM_OP_RESOURCES_INTERFACE_N8 | NONUNIQUE | APPS_TS_INTERFACE | BATCH_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_SEQUENCE_ID | NUMBER | Routing operation unique identifier | ||
| RESOURCE_SEQ_NUM | NUMBER | Resource sequence number | ||
| RESOURCE_ID | NUMBER | Resource unique identifier | ||
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| STANDARD_RATE_FLAG | NUMBER | Use standard rate for shop floor transactions | ||
| ASSIGNED_UNITS | NUMBER | Resource units assigned | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Resource usage rate | ||
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Resource usage rate inverse | ||
| BASIS_TYPE | NUMBER | Basis type identifier | ||
| SCHEDULE_FLAG | NUMBER | Schedule the resource | ||
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| RESOURCE_OFFSET_PERCENT | NUMBER | Resource offset percent from the start of the routing | ||
| AUTOCHARGE_TYPE | NUMBER | Autocharge type for shop floor moves | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of manufactured assembly | ||
| ALTERNATE_ROUTING_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| ROUTING_SEQUENCE_ID | NUMBER | Routing unique identifier | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Abbreviation of organization name | |
| ASSEMBLY_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated item segments | |
| RESOURCE_CODE | VARCHAR2 | (10) | Resource name | |
| ACTIVITY | VARCHAR2 | (10) | Activity name | |
| TRANSACTION_ID | NUMBER | Row identifier | ||
| PROCESS_FLAG | NUMBER | Row status | ||
| TRANSACTION_TYPE | VARCHAR2 | (10) | Create, Update, or Delete | |
| NEW_RESOURCE_SEQ_NUM | NUMBER | New resource sequence number. This column was added to facilitate updates because it's part of the primary key. | ||
| OPERATION_TYPE | NUMBER | Type of Operation | ||
| PRINCIPLE_FLAG | NUMBER | Principal flag | ||
| SCHEDULE_SEQ_NUM | NUMBER | Schedule sequence number | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original System Reference | |
| SETUP_CODE | VARCHAR2 | (30) | Setup Code | |
| ECO_NAME | VARCHAR2 | (10) | ECO Name | |
| NEW_ROUTING_REVISION | VARCHAR2 | (3) | New Routing Revision | |
| ACD_TYPE | NUMBER | Add Change Delete Type | ||
| ENG_CHANGES_IFCE_KEY | NUMBER | Engineering Changes Interface key | ||
| ENG_REVISED_ITEMS_IFCE_KEY | NUMBER | Engineering Revised Items Interface key | ||
| BOM_REV_OP_IFCE_KEY | NUMBER | BOM revised op Interface key | ||
| BOM_REV_OP_RES_IFCE_KEY | NUMBER | BOM revised op resource Interface key | ||
| NEW_REVISED_ITEM_REVISION | VARCHAR2 | (3) | This column is used by the ECO BO for holding the information about the new revised item revision | |
| SUBSTITUTE_GROUP_NUM | NUMBER | Substitute Group Number | ||
| BATCH_ID | NUMBER | Batch Id |
BOM.BOM_OP_RESOURCES_INTERFACE does not reference any database object
BOM.BOM_OP_RESOURCES_INTERFACE is referenced by following:
| Description: | Archive of deleted routings |
|---|
Used by Delete Groups program to archive deleted routings.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROUTING_SEQUENCE_ID | NUMBER | Y | Routing unique identifier | |
| ASSEMBLY_ITEM_ID | NUMBER | Y | Inventory item identifier of manufactured assembly | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ALTERNATE_ROUTING_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ROUTING_TYPE | NUMBER | Y | Routing Type: 2=Engineering routing 1=Manufacturing routing | |
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of common assembly | ||
| COMMON_ROUTING_SEQUENCE_ID | NUMBER | Y | Routing identifier of common routing | |
| ROUTING_COMMENT | VARCHAR2 | (240) | Specific comment about routing | |
| COMPLETION_SUBINVENTORY | VARCHAR2 | (10) | Destination subinventory for assembly | |
| COMPLETION_LOCATOR_ID | NUMBER | Destination location for assembly | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| LINE_ID | NUMBER | Unique identifier from WIP Lines used in Flow Manufacturing | ||
| CFM_ROUTING_FLAG | NUMBER | Continous flow or traditional routing | ||
| MIXED_MODEL_MAP_FLAG | NUMBER | Use this routing in Mixed Model Map calculations | ||
| PRIORITY | NUMBER | For information only | ||
| TOTAL_PRODUCT_CYCLE_TIME | NUMBER | Total time that an assembly takes along the primary path in the operation network calculated by Flow Manufacturing | ||
| CTP_FLAG | NUMBER | Flag indicating capacity must be checked when item is ordered | ||
| PROJECT_ID | NUMBER | Project identifier for Project Manufacturing | ||
| TASK_ID | NUMBER | Task identifier for Project Manufacturing | ||
| PENDING_FROM_ECN | VARCHAR2 | (10) | Pending from ECN | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system reference | |
| SERIALIZATION_START_OP | NUMBER | Serialization starting operation sequence number for standard routings |
BOM.BOM_OP_ROUTINGS_ARCHIVE does not reference any database object
BOM.BOM_OP_ROUTINGS_ARCHIVE is referenced by following:
| Description: | Routing interface data |
|---|
BOM_OP_ROUTINGS_INTERFACE temporarily stores information about
manufacturing and engineering routings. This table contains user
friendly columns which allow you to easily enter your data as well as
their corresponding foreign keys. Oracle Bills of Material will
derive column values you do not enter, after performing the proper
validation. For example, you enter the ORGANIZATION_CODE and Oracle
Bills of Material will fill in the corresponding ORGANIZATION_ID for
you.
.
Also, if you enter PROCESS_REVISION, Oracle Bills of Material will
insert a record into MTL_RTG_ITEM_REVISIONS for your routing item.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_OP_ROUTINGS_INTERFACE_U1 | UNIQUE | APPS_TS_INTERFACE | TRANSACTION_ID |
| BOM_OP_ROUTINGS_INTERFACE_N1 | NONUNIQUE | APPS_TS_INTERFACE | ROUTING_SEQUENCE_ID |
| BOM_OP_ROUTINGS_INTERFACE_N2 | NONUNIQUE | APPS_TS_INTERFACE | COMMON_ROUTING_SEQUENCE_ID |
| BOM_OP_ROUTINGS_INTERFACE_N3 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_ID
ORGANIZATION_ID ALTERNATE_ROUTING_DESIGNATOR |
| BOM_OP_ROUTINGS_INTERFACE_N4 | NONUNIQUE | APPS_TS_INTERFACE | SET_ID |
| BOM_OP_ROUTINGS_INTERFACE_N5 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_NUMBER
ORGANIZATION_CODE ALTERNATE_ROUTING_DESIGNATOR |
| BOM_OP_ROUTINGS_INTERFACE_N6 | NONUNIQUE | APPS_TS_INTERFACE |
PROCESS_FLAG
ORGANIZATION_ID TRANSACTION_ID |
| BOM_OP_ROUTINGS_INTERFACE_N8 | NONUNIQUE | APPS_TS_INTERFACE | BATCH_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROUTING_SEQUENCE_ID | NUMBER | Routing unique identifier | ||
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier for manufactured assembly | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| ALTERNATE_ROUTING_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ROUTING_TYPE | NUMBER | Routing type: 2=Engineering routing 1=Manufacturing routing | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier for common assembly | ||
| COMMON_ROUTING_SEQUENCE_ID | NUMBER | Routing unique identifier of common routing | ||
| ROUTING_COMMENT | VARCHAR2 | (240) | Specific comment about routing | |
| COMPLETION_SUBINVENTORY | VARCHAR2 | (10) | Destination subinventory for assembly | |
| COMPLETION_LOCATOR_ID | NUMBER | Destination location for assembly | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| DEMAND_SOURCE_LINE | VARCHAR2 | (30) | Demand source line - used for ATO | |
| SET_ID | VARCHAR2 | (10) | Set identifier - used for ATO | |
| PROCESS_REVISION | VARCHAR2 | (3) | Routing revision | |
| DEMAND_SOURCE_TYPE | NUMBER | Demand source type - used for ATO | ||
| DEMAND_SOURCE_HEADER_ID | NUMBER | Demand source header identifier - used for ATO | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Abbreviation of organization name | |
| ASSEMBLY_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated item segments | |
| COMMON_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated item segments of the common routing | |
| LOCATION_NAME | VARCHAR2 | (81) | Concatenated location segments | |
| TRANSACTION_ID | NUMBER | Row identifier | ||
| PROCESS_FLAG | NUMBER | Row status | ||
| TRANSACTION_TYPE | VARCHAR2 | (10) | Insert, Update or Delete Routing | |
| LINE_ID | NUMBER | Unique identifier from WIP Lines used in Flow Manufacturing | ||
| LINE_CODE | VARCHAR2 | (10) | Name of WIP Line | |
| MIXED_MODEL_MAP_FLAG | NUMBER | Use this routing in mixed model map calculation | ||
| PRIORITY | NUMBER | For information only | ||
| CFM_ROUTING_FLAG | NUMBER | Continous flow or traditional routing | ||
| TOTAL_PRODUCT_CYCLE_TIME | NUMBER | Total time that an assembly takes along the primary path in the operation network calculated by Flow Manufacturing | ||
| CTP_FLAG | NUMBER | Flag indicating capacity must be checked when item is ordered | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system reference | |
| SERIALIZATION_START_OP | NUMBER | Serialization Starting Operation Sequence Number for standard routings | ||
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Delete group name | |
| DG_DESCRIPTION | VARCHAR2 | (240) | Delete group description | |
| BATCH_ID | NUMBER | BATCH_ID |
BOM.BOM_OP_ROUTINGS_INTERFACE does not reference any database object
BOM.BOM_OP_ROUTINGS_INTERFACE is referenced by following:
| Description: | Routing operations |
|---|
Used by the Delete Group program to archive deleted operations.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_SEQUENCE_ID | NUMBER | Y | Routing operation unique identifier | |
| ROUTING_SEQUENCE_ID | NUMBER | Y | Routing unique identifier | |
| OPERATION_SEQ_NUM | NUMBER | Y | Operation sequence number | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| STANDARD_OPERATION_ID | NUMBER | Standard operation unique identifier | ||
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Indicates the amount of overlap its lead time has with the parent's lead time | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | Minimum operation transfer quantity | ||
| COUNT_POINT_TYPE | NUMBER | Y | Count point | |
| OPERATION_DESCRIPTION | VARCHAR2 | (240) | Description of operation | |
| EFFECTIVITY_DATE | DATE | Y | Date operation is effective | |
| DISABLE_DATE | DATE | Date operation is no longer effective - effectivity lasts until the end of the disable date | ||
| BACKFLUSH_FLAG | NUMBER | Y | Indicates whether operation requires backflushing | |
| OPTION_DEPENDENT_FLAG | NUMBER | Y | Indicates whether to use this operation in all configuration routings, even if no components of the configuration are used in this operation | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| OPERATION_TYPE | NUMBER | Process, line operation, or event | ||
| REFERENCE_FLAG | NUMBER | If Standard Operation is referenced, then the operation can not be updated. | ||
| PROCESS_OP_SEQ_ID | NUMBER | Operation sequence id of parent process (applies only to events) | ||
| LINE_OP_SEQ_ID | NUMBER | Operation sequence id of the parent line operation Only applies to events | ||
| YIELD | NUMBER | Process yield at this operation | ||
| CUMULATIVE_YIELD | NUMBER | Cumulative process yield from begining of routing to this operation | ||
| REVERSE_CUMULATIVE_YIELD | NUMBER | Cumulative process yield from end of routing to comparable operation | ||
| LABOR_TIME_CALC | NUMBER | System calculated run time attributable to labor | ||
| MACHINE_TIME_CALC | NUMBER | System calculated run time attributable to machines | ||
| TOTAL_TIME_CALC | NUMBER | System calculated run time attributable to both labor and machines | ||
| LABOR_TIME_USER | NUMBER | User calculated run time attributable to labor | ||
| MACHINE_TIME_USER | NUMBER | User calculated run time attributable to machines | ||
| TOTAL_TIME_USER | NUMBER | User calculated run time attributable to both labor and machines | ||
| NET_PLANNING_PERCENT | NUMBER | Cumulative planning percents derived from the operation network | ||
| X_COORDINATE | NUMBER | X coordinate of the operation | ||
| Y_COORDINATE | NUMBER | Y coordinate of the operation | ||
| INCLUDE_IN_ROLLUP | NUMBER | Indicates whether operation yield is to be considered in cost rollup | ||
| OPERATION_YIELD_ENABLED | NUMBER | Indicates whether operation yield is to be considered during costing. | ||
| OLD_OPERATION_SEQUENCE_ID | NUMBER | Old operation sequence Id | ||
| ACD_TYPE | NUMBER | ACD type | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Revised Item Sequence Id | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (30) | Original System Reference | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change notice code | |
| IMPLEMENTATION_DATE | DATE | Date on which engineering change will be implemented | ||
| ECO_FOR_PRODUCTION | NUMBER | Indicates if this operation on an Engineering Change Order is only for WIP jobs | ||
| SHUTDOWN_TYPE | VARCHAR2 | (30) | Shutdown type | |
| ACTUAL_IPK | NUMBER | Actual In-Process Kanbans | ||
| CRITICAL_TO_QUALITY | VARCHAR2 | (1) | Critical To Quality | |
| VALUE_ADDED | VARCHAR2 | (1) | Value Added | |
| MACHINE_PROCESS_EFFICIENCY | NUMBER | Used by flow manufacturing for process efficiency calculations | ||
| LABOR_PROCESS_EFFICIENCY | NUMBER | Used by flow manufacturing for process efficiency calculations | ||
| TOTAL_PROCESS_EFFICIENCY | NUMBER | Used by flow manufacturing for process efficiency calculations | ||
| LONG_DESCRIPTION | VARCHAR2 | (4000) | Used by EAM routings | |
| CONFIG_ROUTING_ID | NUMBER | This column denotes the corresponding model routing that this configuration routing operation is derived from | ||
| MODEL_OP_SEQ_ID | NUMBER | This column denotes the corresponding model routing operation that this configuration routing operation is derived from | ||
| LOWEST_ACCEPTABLE_YIELD | NUMBER | Lowest Acceptable Yield | ||
| USE_ORG_SETTINGS | NUMBER | Use Org Settings | ||
| QUEUE_MANDATORY_FLAG | NUMBER | Queue Mandatory Flag | ||
| RUN_MANDATORY_FLAG | NUMBER | Run Mandatory Flag | ||
| TO_MOVE_MANDATORY_FLAG | NUMBER | To Move Mandatory Flag | ||
| SHOW_NEXT_OP_BY_DEFAULT | NUMBER | Show Next Op By Default | ||
| SHOW_SCRAP_CODE | NUMBER | Show Scrap Code | ||
| SHOW_LOT_ATTRIB | NUMBER | Show Lot Attrib | ||
| TRACK_MULTIPLE_RES_USAGE_DATES | NUMBER | Track Multiple Res Usage Dates |
BOM.BOM_OP_SEQUENCES_ARCHIVE does not reference any database object
BOM.BOM_OP_SEQUENCES_ARCHIVE is referenced by following:
| Description: | Routing operation interface data |
|---|
BOM_OP_SEQUENCES_INTERFACE temporarily stores information about
routing operations. This table contains user friendly columns which
allow you to easily enter your data as well as their corresponding
foreign keys. Oracle Bills of Material will derive column values you
do not enter, after performing the proper validation. For example, you
enter the ORGANIZATION_CODE and Oracle Bills of Material will fill in
the corresponding ORGANIZATION_ID for you.
.
Also, you can enter ASSEMBLY_ITEM_ID, ORGANIZATION_ID and
ALTERNATE_ROUTING_DESIGNATOR instead of ROUTING_SEQUENCE_ID. Oracle
Bills of Material will fill in the corresponding ROUTING_SEQUENCE_ID.
.
In addition, you can enter three resources and three instructions for
each operation sequence. Oracle Bills of Material will insert these
records into the tables, BOM_OPERATION_RESOURCES and
BOM_OPERATION_INSTRUCTIONS, respectively.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_OP_SEQUENCES_INTERFACE_U1 | UNIQUE | APPS_TS_INTERFACE | TRANSACTION_ID |
| BOM_OP_SEQUENCES_INTERFACE_N1 | NONUNIQUE | APPS_TS_INTERFACE | OPERATION_SEQUENCE_ID |
| BOM_OP_SEQUENCES_INTERFACE_N2 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_ID
ORGANIZATION_ID ALTERNATE_ROUTING_DESIGNATOR |
| BOM_OP_SEQUENCES_INTERFACE_N3 | NONUNIQUE | APPS_TS_INTERFACE |
ROUTING_SEQUENCE_ID
OPERATION_SEQ_NUM EFFECTIVITY_DATE |
| BOM_OP_SEQUENCES_INTERFACE_N4 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_NUMBER
ORGANIZATION_ID |
| BOM_OP_SEQUENCES_INTERFACE_N5 | NONUNIQUE | APPS_TS_INTERFACE | ENG_CHANGES_IFCE_KEY |
| BOM_OP_SEQUENCES_INTERFACE_N6 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_NUMBER
ORGANIZATION_CODE ALTERNATE_ROUTING_DESIGNATOR |
| BOM_OP_SEQUENCES_INTERFACE_N7 | NONUNIQUE | APPS_TS_INTERFACE |
PROCESS_FLAG
ORGANIZATION_ID TRANSACTION_ID |
| BOM_OP_SEQUENCES_INTERFACE_N9 | NONUNIQUE | APPS_TS_INTERFACE | BATCH_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_SEQUENCE_ID | NUMBER | Routing operation unique identifier | ||
| ROUTING_SEQUENCE_ID | NUMBER | Routing unique identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| STANDARD_OPERATION_ID | NUMBER | Standard operation unique identifier | ||
| DEPARTMENT_ID | NUMBER | Department unique identifier | ||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Indicates the amount of overlap lead time this has with the parent's lead time | ||
| RUN_TIME_OVERLAP_PERCENT | NUMBER | Not currently used | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | Minimum operation transfer quantity | ||
| COUNT_POINT_TYPE | NUMBER | Count point | ||
| OPERATION_DESCRIPTION | VARCHAR2 | (240) | Description of operation | |
| EFFECTIVITY_DATE | DATE | Date operation is effective | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Not currently used | |
| IMPLEMENTATION_DATE | DATE | Not currently used | ||
| DISABLE_DATE | DATE | Date operation is no longer effective - effectivity lasts until the end of the disable date | ||
| BACKFLUSH_FLAG | NUMBER | Indicates whether operation requires backflushing | ||
| OPTION_DEPENDENT_FLAG | NUMBER | Indicates whether to use this operation in all configuration routings, even if no components of the configuration are used in this routing | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| MODEL_OP_SEQ_ID | NUMBER | Operation sequence identifier from model bill | ||
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of manufactured assembly | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| ALTERNATE_ROUTING_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Abbreviation of organization name | |
| ASSEMBLY_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated item segments | |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Department name | |
| OPERATION_CODE | VARCHAR2 | (4) | Standard operation code | |
| RESOURCE_ID1 | NUMBER | First resource identifier | ||
| RESOURCE_ID2 | NUMBER | Second resource identifier | ||
| RESOURCE_ID3 | NUMBER | Third resource identifier | ||
| RESOURCE_CODE1 | VARCHAR2 | (10) | First resource name | |
| RESOURCE_CODE2 | VARCHAR2 | (10) | Second resource name | |
| RESOURCE_CODE3 | VARCHAR2 | (10) | Third resource name | |
| INSTRUCTION_CODE1 | VARCHAR2 | (10) | First standard instruction code | |
| INSTRUCTION_CODE2 | VARCHAR2 | (10) | Second standard instruction code | |
| INSTRUCTION_CODE3 | VARCHAR2 | (10) | Third standard instruction code | |
| TRANSACTION_ID | NUMBER | Row identifier | ||
| PROCESS_FLAG | NUMBER | Row status | ||
| TRANSACTION_TYPE | VARCHAR2 | (10) | Create, Update or Delete | |
| NEW_OPERATION_SEQ_NUM | NUMBER | Added to facilitate updates because it's part of the primary key | ||
| NEW_EFFECTIVITY_DATE | DATE | Added to facilitate updates because it's part of the primary key | ||
| ASSEMBLY_TYPE | NUMBER | Not used in open interface | ||
| OPERATION_TYPE | NUMBER | Operation Type: process, line operation, or event | ||
| REFERENCE_FLAG | NUMBER | If the Standard Operation is referenced or copied then the operation can not be updated | ||
| PROCESS_OP_SEQ_ID | NUMBER | Operation sequence identifier of parent process (only applies to events) | ||
| LINE_OP_SEQ_ID | NUMBER | Operation sequence identifier of the parent line operation (only applies to events) | ||
| YIELD | NUMBER | Process yield at this operation | ||
| CUMULATIVE_YIELD | NUMBER | Cumulative process yield from begining of routing to this operation | ||
| REVERSE_CUMULATIVE_YIELD | NUMBER | Cumulative process yield from end of routing to comparable operation. For example, if this is the second operation out of 10 operations, the reverse cumulative yield would be the total yield from the tenth down to the ninth operation | ||
| LABOR_TIME_CALC | NUMBER | System calculated run time attributable to labor | ||
| MACHINE_TIME_CALC | NUMBER | System calculated run time attributable to machines | ||
| TOTAL_TIME_CALC | NUMBER | System calculated run time attributable to both labor and machines | ||
| LABOR_TIME_USER | NUMBER | User calculated run time attributable to labor | ||
| MACHINE_TIME_USER | NUMBER | User calculated run time attributable to machines | ||
| TOTAL_TIME_USER | NUMBER | User calculated run time attributable to both labor and machines | ||
| NET_PLANNING_PERCENT | NUMBER | Cumulative planning percents derived from the operation network | ||
| INCLUDE_IN_ROLLUP | NUMBER | Indicates whether operation yield is to be considered in cost rollup | ||
| OPERATION_YIELD_ENABLED | NUMBER | Indicates whether operation yield is to be considered during costing. | ||
| PROCESS_SEQ_NUMBER | NUMBER | Operation sequence identifier of parent process (applies only to events) | ||
| PROCESS_CODE | VARCHAR2 | (4) | Parent process code (applies only to events) | |
| LINE_OP_SEQ_NUMBER | NUMBER | Operation sequence identifier of the parent line operation - only applies to events | ||
| LINE_OP_CODE | VARCHAR2 | (4) | Code of the parent line operation - only applies to events | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original System Reference for the current record has come from | |
| SHUTDOWN_TYPE | VARCHAR2 | (30) | Shutdown type | |
| LONG_DESCRIPTION | VARCHAR2 | (4000) | Used by EAM routings | |
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Delete Group Name | |
| DG_DESCRIPTION | VARCHAR2 | (240) | Delete Group Description | |
| NEW_ROUTING_REVISION | VARCHAR2 | (3) | New Routing Revision | |
| ACD_TYPE | NUMBER | ACD type | ||
| OLD_START_EFFECTIVE_DATE | DATE | Old Effectivity Date | ||
| CANCEL_COMMENTS | VARCHAR2 | (240) | Cancellation Comment | |
| ENG_CHANGES_IFCE_KEY | NUMBER | Engineering changes IFCE key | ||
| ENG_REVISED_ITEMS_IFCE_KEY | NUMBER | Engineering revised item IFCE key | ||
| BOM_REV_OP_IFCE_KEY | NUMBER | BOM Rev operation IFCE key | ||
| NEW_REVISED_ITEM_REVISION | VARCHAR2 | (3) | This column is used by the ECO BO for holding the information about the new revised item revision | |
| BATCH_ID | NUMBER | BATCH_ID |
BOM.BOM_OP_SEQUENCES_INTERFACE does not reference any database object
BOM.BOM_OP_SEQUENCES_INTERFACE is referenced by following:
| Description: | Bills of material parameters |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_PARAMETERS.BOM_DELETE_STATUS_CODE | MTL_ITEM_STATUS |
BOM_PARAMETERS stores organization specific information used by Oracle
Bills of Material. You can use Oracle Bills of Material only if you
have a row exisiting in this table.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_PARAMETERS_U1 | UNIQUE | APPS_TS_SEED | ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| MAXIMUM_BOM_LEVEL | NUMBER | Y | Maximum bill of material levels allowed | |
| CONFIG_SEGMENT_NAME | VARCHAR2 | (30) | Item segment to use when creating configuration item numbers | |
| BOM_DELETE_STATUS_CODE | VARCHAR2 | (10) | Status code to indicate an item is ready for deletion | |
| CONFIG_NUMBER_METHOD_TYPE | NUMBER | The method that is used to create configuration item numbers | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| GLOBAL_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| GLOBAL_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE16 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE17 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE18 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE19 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| GLOBAL_ATTRIBUTE20 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| USE_PHANTOM_ROUTINGS | NUMBER | (1) | Y | Specifies whether phantom routing should be used. |
| INHERIT_PHANTOM_OP_SEQ | NUMBER | (1) | Y | Specifies whether component of a phantom should inherit operation sequence of the parent |
| ENABLE_LOWER_LEVEL_SUPPLY | NUMBER | (1) | Specifies whether supply should be automatically created for lower level configurations | |
| CREATE_CONFIG_BOM | VARCHAR2 | (1) | Allow Config BOM Creation | |
| INCLUDE_MODELS_IN_ROLLUP | VARCHAR2 | (1) | Allow Config BOM Creation |
BOM.BOM_PARAMETERS does not reference any database object
BOM.BOM_PARAMETERS is referenced by following:
| Description: | Workday calendar period start dates |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_PERIOD_START_DATES.CALENDAR_CODE | BOM_CALENDARS |
| BOM_PERIOD_START_DATES.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
BOM_PERIOD_START_DATES stores periods between the calendar start date
and end dates that the workday calendar program generates. The workday
calendar program generates period start dates that depend on the
quarterly calendar type you choose for your calendar. For a quarterly
calendar type 4-4-5, the first period is the beginning of the first
week, second and third period is the end of 4 weeks, fourth is at the
end of 5 weeks and so on. Similarly, you can have a 5-4-4 pattern for
your calendar. A thirteen period quarterly calendar type has 13 equal
periods of 4 weeks each for a year. A regular calendar quarterly
calendar type follows a Julian calendar to decide the periods.
.
Each period start date has a name which can be either 1-13P or JAN-DEC
depending on the quarterly calendar type you chose. This table stores
next period and prior period. A sequence starting at 1, is assigned to
each period.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_PERIOD_START_DATES_U1 | UNIQUE | APPS_TS_TX_IDX |
CALENDAR_CODE
EXCEPTION_SET_ID PERIOD_START_DATE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| EXCEPTION_SET_ID | NUMBER | Y | Exception set unique identifier | |
| PERIOD_START_DATE | DATE | Y | Period start date | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| PERIOD_SEQUENCE_NUM | NUMBER | Sequence number | ||
| PERIOD_NAME | VARCHAR2 | (3) | Period Name (depends on quarterly calendar type chosen) | |
| NEXT_DATE | DATE | Y | Next calendar date corresponding to next sequence number | |
| PRIOR_DATE | DATE | Y | Prior date corresponding to prior sequence number | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_PERIOD_START_DATES does not reference any database object
BOM.BOM_PERIOD_START_DATES is referenced by following:
| Description: | Component reference designators |
|---|
Used by Delete Group program to archive reference designators deleted
as a result of a cascade delete on components.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COMPONENT_REFERENCE_DESIGNATOR | VARCHAR2 | (15) | Y | Component reference designator |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REF_DESIGNATOR_COMMENT | VARCHAR2 | (240) | Reference designator comment | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| ACD_TYPE | NUMBER | Add or delete code from an engineering change order | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from | |
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common component sequence id |
BOM.BOM_REFERENCE_DESGS_ARCHIVE does not reference any database object
BOM.BOM_REFERENCE_DESGS_ARCHIVE is referenced by following:
| Description: | Component reference designators |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_REFERENCE_DESIGNATORS.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
BOM_REFERENCE_DESIGNATORS stores information about bill of material
component reference designators. It is a child table of
BOM_INVENTORY_COMPONENTS, and stores reference designators for current
components as well as components that are pending on ECOs. Even though
the column COMPONENT_REFERENCE_DESIGNATOR has the database length of
15 characters, Oracle Bills of Material and Oracle Engineering only
allow you to enter reference designators with a maximum length of 10
characters.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_REFERENCE_DESIGNATORS_U1 | UNIQUE | APPS_TS_TX_IDX |
COMPONENT_SEQUENCE_ID
COMPONENT_REFERENCE_DESIGNATOR ACD_TYPE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COMPONENT_REFERENCE_DESIGNATOR | VARCHAR2 | (15) | Y | Component reference designator |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REF_DESIGNATOR_COMMENT | VARCHAR2 | (240) | Reference designator comment | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| ACD_TYPE | NUMBER | Add or delete code from an engineering change order | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from | |
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common Component Sequence Id |
BOM.BOM_REFERENCE_DESIGNATORS does not reference any database object
BOM.BOM_REFERENCE_DESIGNATORS is referenced by following:
| Description: | Reference designator interface data |
|---|
BOM_REF_DESGS_INTERFACE temporarily stores information about
bill of material component reference designators. This table is shared
by the Bills of Material and Engineering Change Order open
interfaces.
This table contains user friendly columns which allow you to easily
enter your data as well as their corresponding foreign keys. The open
interfaces will derive column values you do not enter, after
performing the proper validation. For example, you enter the
ORGANIZATION_CODE, and the open interfaces will fill in the
corresponding ORGANIZATION_ID for you.
.
Also, you can enter ASSEMBLY_ITEM_ID, ORGANIZATION_ID and
ALTERNATE_BOM_DESIGNATOR instead of BILL_SEQUENCE_ID. The open
interfaces will fill in the corresponding BILL_SEQUENCE_ID.
.
In addition, you can enter BILL_SEQUENCE_ID, COMPONENT_ITEM_ID,
OPERATION_SEQ_NUM, and EFFECTIVITY_DATE instead of _
COMPONENT_SEQUENCE_ID. The open interfaces will fill in the
corresponding COMPONENT_SEQUENCE_ID.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_REF_DESGS_INTERFACE_N1 | NONUNIQUE | APPS_TS_INTERFACE |
ORGANIZATION_ID
ASSEMBLY_ITEM_ID ALTERNATE_BOM_DESIGNATOR |
| BOM_REF_DESGS_INTERFACE_N2 | NONUNIQUE | APPS_TS_INTERFACE |
COMPONENT_SEQUENCE_ID
COMPONENT_REFERENCE_DESIGNATOR |
| BOM_REF_DESGS_INTERFACE_N3 | NONUNIQUE | APPS_TS_INTERFACE | TRANSACTION_ID |
| BOM_REF_DESGS_INTERFACE_N4 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_NUMBER
ORGANIZATION_ID BOM_REF_DESGS_IFCE_KEY |
| BOM_REF_DESGS_INTERFACE_N5 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_NUMBER
ORGANIZATION_CODE ALTERNATE_BOM_DESIGNATOR |
| BOM_REF_DESGS_INTERFACE_N6 | NONUNIQUE | APPS_TS_INTERFACE | ENG_CHANGES_IFCE_KEY |
| BOM_REF_DESGS_INTERFACE_N7 | NONUNIQUE | APPS_TS_INTERFACE |
PROCESS_FLAG
ORGANIZATION_ID TRANSACTION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COMPONENT_REFERENCE_DESIGNATOR | VARCHAR2 | (15) | Component reference designator | |
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REF_DESIGNATOR_COMMENT | VARCHAR2 | (240) | Reference designator comment | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| ACD_TYPE | NUMBER | Add or delete code from an ECO | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BILL_SEQUENCE_ID | NUMBER | Bill of material unique identifier | ||
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of the bill | ||
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Abbreviation of organization name | |
| ASSEMBLY_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated item segments of the bill | |
| COMPONENT_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated item segments of the component | |
| TRANSACTION_ID | NUMBER | Row identifier | ||
| PROCESS_FLAG | NUMBER | Row status | ||
| NEW_DESIGNATOR | VARCHAR2 | (15) | Updated value for the old reference designator. | |
| INTERFACE_ENTITY_TYPE | VARCHAR2 | (4) | Record used for Bill or ECO Open Interface: BILL, ECO | |
| TRANSACTION_TYPE | VARCHAR2 | (10) | Type of action: CREATE, UPDATE or DELETE | |
| BOM_REF_DESGS_IFCE_KEY | VARCHAR2 | (30) | User defined identifier for linking rows of the same business object | |
| BOM_INVENTORY_COMPS_IFCE_KEY | VARCHAR2 | (30) | User defined identifier to link rows pertaining to the same business object | |
| ENG_REVISED_ITEMS_IFCE_KEY | VARCHAR2 | (30) | User defined identifier to link rows pertaining to the same business object | |
| ENG_CHANGES_IFCE_KEY | VARCHAR2 | (30) | User defined identifier to link rows pertaining to the same business object | |
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (240) | From End Item Unit Number | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (240) | Original system that data for the current record has come from | |
| NEW_REVISED_ITEM_REVISION | VARCHAR2 | (3) | New Revised Item Revision is one of the unique keys to identify a revised item of a change | |
| RETURN_STATUS | VARCHAR2 | (1) | Return Status | |
| BATCH_ID | NUMBER | Batch Identifier for Data Load | ||
| COMP_SOURCE_SYSTEM_REFERENCE | VARCHAR2 | (240) | Component Source System Item Name | |
| PARENT_SOURCE_SYSTEM_REFERENCE | VARCHAR2 | (240) | Parent Source System Item Name | |
| CHANGE_ID | NUMBER | Change Identifier | ||
| CHANGE_TRANSACTION_TYPE | VARCHAR2 | (10) | Change Management Transaction Type for Change Orders | |
| INTERFACE_TABLE_UNIQUE_ID | NUMBER | InterfaceTable Unique Id for Merge | ||
| ASSEMBLY_ITEM_REVISION_CODE | VARCHAR2 | (240) | Assembly Item Revision Code | |
| ASSEMBLY_ITEM_REVISION_ID | NUMBER | Assembly Item Revision Id |
BOM.BOM_REF_DESGS_INTERFACE does not reference any database object
BOM.BOM_REF_DESGS_INTERFACE is referenced by following:
| Description: | Resources, overheads, material cost codes, and material overheads |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_RESOURCES.ORGANIZATION_ID | MTL_PARAMETERS |
| BOM_RESOURCES.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| BOM_RESOURCES.DEFAULT_ACTIVITY_ID | CST_ACTIVITIES |
| BOM_RESOURCES.ABSORPTION_ACCOUNT | GL_CODE_COMBINATIONS |
| BOM_RESOURCES.RATE_VARIANCE_ACCOUNT | GL_CODE_COMBINATIONS |
| Foreign Key Column | Foreign Table |
|---|---|
| AHL_OPERATION_RESOURCES.RESOURCE_ID | BOM_RESOURCES |
| AHL_RESOURCE_MAPPINGS.BOM_RESOURCE_ID | BOM_RESOURCES |
| AHL_WO_OPERATIONS_TXNS.BOM_RESOURCE_ID | BOM_RESOURCES |
| BOM_DEPARTMENT_RESOURCES.RESOURCE_ID | BOM_RESOURCES |
| BOM_RESOURCE_SETUPS.RESOURCE_ID | BOM_RESOURCES |
| BOM_STD_SUB_OP_RESOURCES.RESOURCE_ID | BOM_RESOURCES |
| CSD_REPAIR_ESTIMATE_LINES.RESOURCE_ID | BOM_RESOURCES |
| CST_AE_LINES.RESOURCE_ID | BOM_RESOURCES |
| CST_DEPARTMENT_OVERHEADS.OVERHEAD_ID | BOM_RESOURCES |
| CST_ITEM_COST_DETAILS.RESOURCE_ID | BOM_RESOURCES |
| CST_ITEM_COST_DETAILS.BASIS_RESOURCE_ID | BOM_RESOURCES |
| CST_ITEM_CST_DTLS_INTERFACE.RESOURCE_ID | BOM_RESOURCES |
| CST_ITEM_CST_DTLS_INTERFACE.BASIS_RESOURCE_ID | BOM_RESOURCES |
| CST_ITEM_OVERHEAD_DEFAULTS.MATERIAL_OVERHEAD_ID | BOM_RESOURCES |
| CST_RESOURCE_COSTS.RESOURCE_ID | BOM_RESOURCES |
| CST_RESOURCE_OVERHEADS.RESOURCE_ID | BOM_RESOURCES |
| CST_RESOURCE_OVERHEADS.OVERHEAD_ID | BOM_RESOURCES |
| CST_STD_COST_ADJ_DEBUG.RESOURCE_ID | BOM_RESOURCES |
| CST_STD_COST_ADJ_TEMP.RESOURCE_ID | BOM_RESOURCES |
| CST_STD_COST_ADJ_VALUES.RESOURCE_ID | BOM_RESOURCES |
| FLM_MMM_OP_RESOURCES.RESOURCE_ID | BOM_RESOURCES |
| MRP_PLANNED_RESOURCE_REQS.RESOURCE_ID | BOM_RESOURCES |
| MTL_ACTUAL_COST_SUBELEMENT.RESOURCE_ID | BOM_RESOURCES |
| MTL_PAC_COST_SUBELEMENTS.RESOURCE_ID | BOM_RESOURCES |
| MTL_PARAMETERS.DEFAULT_MATERIAL_COST_ID | BOM_RESOURCES |
| MTL_TRANSACTION_ACCOUNTS.RESOURCE_ID | BOM_RESOURCES |
| PA_EXPENDITURE_ITEMS_AR.WIP_RESOURCE_ID | BOM_RESOURCES |
| PA_EXPENDITURE_ITEMS_ALL.WIP_RESOURCE_ID | BOM_RESOURCES |
| PA_RESOURCE_ASSIGNMENTS.BOM_RESOURCE_ID | BOM_RESOURCES |
| PA_RESOURCE_LIST_MEMBERS.BOM_RESOURCE_ID | BOM_RESOURCES |
| PA_TRANSACTION_INTERFACE_ALL.WIP_RESOURCE_ID | BOM_RESOURCES |
| PA_TXN_INTERFACE_AUDIT_AR.WIP_RESOURCE_ID | BOM_RESOURCES |
| PA_TXN_INTERFACE_AUDIT_ALL.WIP_RESOURCE_ID | BOM_RESOURCES |
| PO_DISTRIBUTIONS_ARCHIVE_ALL.BOM_RESOURCE_ID | BOM_RESOURCES |
| PO_DISTRIBUTIONS_ALL.BOM_RESOURCE_ID | BOM_RESOURCES |
| PO_REQUISITION_LINES_ALL.BOM_RESOURCE_ID | BOM_RESOURCES |
| QA_RESULTS.RESOURCE_ID | BOM_RESOURCES |
| RCV_TRANSACTIONS.BOM_RESOURCE_ID | BOM_RESOURCES |
| RCV_TRANSACTIONS_INTERFACE.BOM_RESOURCE_ID | BOM_RESOURCES |
| WIP_COST_TXN_INTERFACE.RESOURCE_ID | BOM_RESOURCES |
| WIP_OPERATION_OVERHEADS.OVERHEAD_ID | BOM_RESOURCES |
| WIP_OPERATION_RESOURCES.RESOURCE_ID | BOM_RESOURCES |
| WIP_PAC_ACTUAL_COST_DETAILS.RESOURCE_ID | BOM_RESOURCES |
| WIP_SUB_OPERATION_RESOURCES.RESOURCE_ID | BOM_RESOURCES |
| WIP_TRANSACTIONS.RESOURCE_ID | BOM_RESOURCES |
| WIP_TRANSACTION_ACCOUNTS.RESOURCE_ID | BOM_RESOURCES |
| WMS_DISPATCHED_TASKS_ARCH.PERSON_RESOURCE_ID | BOM_RESOURCES |
| WMS_DISPATCHED_TASKS_ARCH.MACHINE_RESOURCE_ID | BOM_RESOURCES |
| WMS_DISPATCHED_TASKS.PERSON_RESOURCE_ID | BOM_RESOURCES |
| WMS_DISPATCHED_TASKS.MACHINE_RESOURCE_ID | BOM_RESOURCES |
| WMS_DISPATCHED_TASKS_HISTORY.PERSON_RESOURCE_ID | BOM_RESOURCES |
| WMS_DISPATCHED_TASKS_HISTORY.MACHINE_RESOURCE_ID | BOM_RESOURCES |
BOM_RESOURCES stores information about resources, overheads, material
overheads, and material sub-elements. COST_ELEMENT_ID determines the
type of the resource. Resources are additionally classified as either
material resources or outside processing resources
.
If the resource represents a currency unit, UNIT_OF_MEASURE stores the
currency code associated with the set of books the organization points
to.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_RESOURCES_U1 | UNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
RESOURCE_CODE COST_CODE_TYPE |
| BOM_RESOURCES_U2 | UNIQUE | APPS_TS_TX_IDX | RESOURCE_ID |
| BOM_RESOURCES_N1 | NONUNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
PURCHASE_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| RESOURCE_CODE | VARCHAR2 | (10) | Y | Resource code |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DISABLE_DATE | DATE | Disable date | ||
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| PURCHASE_ITEM_ID | NUMBER | Purchase item identifier | ||
| COST_CODE_TYPE | NUMBER | Y | Cost code type | |
| FUNCTIONAL_CURRENCY_FLAG | NUMBER | Y | Unit of measure is functional currency | |
| UNIT_OF_MEASURE | VARCHAR2 | (3) | Unit of measure | |
| DEFAULT_ACTIVITY_ID | NUMBER | Default activity identifier | ||
| RESOURCE_TYPE | NUMBER | Resource type | ||
| AUTOCHARGE_TYPE | NUMBER | Autocharge for shopfloor transaction | ||
| STANDARD_RATE_FLAG | NUMBER | Use standard rate for shopfloor transaction | ||
| DEFAULT_BASIS_TYPE | NUMBER | Default basis | ||
| ABSORPTION_ACCOUNT | NUMBER | Absorption account | ||
| ALLOW_COSTS_FLAG | NUMBER | Y | Allow costs to be defined | |
| RATE_VARIANCE_ACCOUNT | NUMBER | Rate variance account | ||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | Expenditure type | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| BATCHABLE | NUMBER | Batchable | ||
| MAX_BATCH_CAPACITY | NUMBER | Maximum batch capacity | ||
| MIN_BATCH_CAPACITY | NUMBER | Minimum batch capacity | ||
| BATCH_CAPACITY_UOM | VARCHAR2 | (3) | Batch capacity Unit of Measure | |
| BATCH_WINDOW | NUMBER | Batch Window | ||
| BATCH_WINDOW_UOM | VARCHAR2 | (3) | Batch Window UOM | |
| COMPETENCE_ID | NUMBER | (15) | Competence for people resources | |
| RATING_LEVEL_ID | NUMBER | (15) | Rating scale for people resources | |
| QUALIFICATION_TYPE_ID | NUMBER | (9) | Qualification for people resources | |
| BILLABLE_ITEM_ID | NUMBER | Item ID for the resource that is billable | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory for a machine type resource | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator id for resource type machine | ||
| BATCHING_PENALTY | NUMBER | Batching Penalty |
BOM.BOM_RESOURCES does not reference any database object
BOM.BOM_RESOURCES is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
BOM_RESOURCES_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
BOM_RESOURCES prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | Resource Identifier | |
| UNIT_OF_MEASURE | VARCHAR2 | (3) | Unit Of Measure | |
| SET_OF_BOOKS_ID | NUMBER | Set of Books Identifier |
BOM.BOM_RESOURCES_EFC does not reference any database object
BOM.BOM_RESOURCES_EFC is referenced by following:
| Description: | Resource capacity modifications |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_RESOURCE_CHANGES.DEPARTMENT_ID
BOM_RESOURCE_CHANGES.RESOURCE_ID BOM_RESOURCE_CHANGES.SHIFT_NUM |
BOM_RESOURCE_SHIFTS |
BOM_RESOURCE_CHANGES stores information about capacity modifications
for a resource on a shift in a department. This table is a child
of BOM_RESOURCE_SHIFTS. You can define multiple resource changes
for a shift.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_RESOURCE_CHANGES_U1 | UNIQUE | APPS_TS_TX_IDX |
DEPARTMENT_ID
RESOURCE_ID SHIFT_NUM ACTION_TYPE FROM_DATE TO_DATE FROM_TIME TO_TIME SIMULATION_SET |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| SHIFT_NUM | NUMBER | Y | Shift number | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| FROM_DATE | DATE | Y | Capacity exception from date | |
| TO_DATE | DATE | Capacity exception to date | ||
| FROM_TIME | NUMBER | Capacity exception from time | ||
| TO_TIME | NUMBER | Capacity exception to time | ||
| CAPACITY_CHANGE | NUMBER | Capacity change | ||
| SIMULATION_SET | VARCHAR2 | (10) | Y | Simulation set identifier |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ACTION_TYPE | NUMBER | Y | Type of capacity modification | |
| REASON_CODE | VARCHAR2 | (80) | Reason code for the reason in the common lookups table which has the reason | |
| DOWNTIME_GROUP_ID | NUMBER | Unique batch identifier of the Load Production Equipment Downtime Process |
BOM.BOM_RESOURCE_CHANGES does not reference any database object
BOM.BOM_RESOURCE_CHANGES is referenced by following:
| Description: | BOM_RESOURCE_DOWNCODES stores resource downcodes information.You will be able to specify multiple downcodes for each resource. |
|---|
BOM_RESOURCE_DOWNCODES stores the downcode information for a Resource. Holds the data when Resource is not available. Records in the table is identified by RESOURCE_ID and DOWNCODES.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_RESOURCE_DOWNCODES_U1 | UNIQUE | APPS_TS_TX_IDX |
RESOURCE_ID
DOWNCODE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| DOWNCODE | NUMBER | Y | Resource Downcode | |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO Column | |
| CREATION_DATE | DATE | Y | Standard WHO Column | |
| CREATED_BY | NUMBER | Y | Standard WHO Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO Column |
BOM.BOM_RESOURCE_DOWNCODES does not reference any database object
BOM.BOM_RESOURCE_DOWNCODES is referenced by following:
| Description: | Bom employee resources |
|---|
BOM_RESOURCE_EMPLOYEES stores information about the Employees that are associated with Roles ("Resources" of type "Person") for the Warehouse Management System (WMS).
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_RESOURCE_EMPLOYEES_U1 | UNIQUE | APPS_TS_TX_IDX | INSTANCE_ID |
| BOM_RESOURCE_EMPLOYEES_U2 | UNIQUE | APPS_TS_TX_IDX |
RESOURCE_ID
ORGANIZATION_ID PERSON_ID EFFECTIVE_START_DATE EFFECTIVE_END_DATE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| PERSON_ID | NUMBER | (10) | Y | Person identifier |
| EFFECTIVE_START_DATE | DATE | Y | Effective Start Date | |
| EFFECTIVE_END_DATE | DATE | Y | Effective End Date | |
| INTERLEAVE | NUMBER | Y | Interleave | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| INSTANCE_ID | NUMBER | Instance Id |
BOM.BOM_RESOURCE_EMPLOYEES does not reference any database object
BOM.BOM_RESOURCE_EMPLOYEES is referenced by following:
| Description: | Bom equipment resources |
|---|
BOM_RESOURCE_EQUIPMENTS stores information about the Equipments that are associated with Equipment Type ("Resources" of type "Machine") for the Warehouse Management System (WMS).
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_RESOURCE_EQUIPMENTS_U2 | UNIQUE | APPS_TS_TX_IDX |
RESOURCE_ID
ORGANIZATION_ID INVENTORY_ITEM_ID |
| BOM_RESOURCE_EQUIPMENTS_U1 | NONUNIQUE | APPS_TS_TX_IDX | INSTANCE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| INSTANCE_ID | NUMBER | Instance identifier |
BOM.BOM_RESOURCE_EQUIPMENTS does not reference any database object
BOM.BOM_RESOURCE_EQUIPMENTS is referenced by following:
| Description: | Tolerance percentage by which the present capacity of a particular resource or a line can be increased |
|---|
In this table you can specify a tolerance percentage by which the present capacity of a particular resource or a line can be increased. You must know in advance the number of days after which that particular resource or line will be needed.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_RESOURCE_FLEX_FENCES_U1 | UNIQUE | APPS_TS_TX_IDX |
DEPARTMENT_ID
RESOURCE_ID FENCE_DAYS |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| RESOURCE_ID | NUMBER | Unique resource identifier | ||
| FENCE_DAYS | NUMBER | Y | Days included in time fence | |
| TOLERANCE_PERCENTAGE | NUMBER | Percentage of tolerance beyond time fence | ||
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_RESOURCE_FLEX_FENCES does not reference any database object
BOM.BOM_RESOURCE_FLEX_FENCES is referenced by following:
| Description: | Resource Setups |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_RESOURCE_SETUPS.RESOURCE_ID | BOM_RESOURCES |
| BOM_RESOURCE_SETUPS.SETUP_ID | BOM_SETUP_TYPES |
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_SETUP_TRANSITIONS.RESOURCE_ID
BOM_SETUP_TRANSITIONS.ORGANIZATION_ID BOM_SETUP_TRANSITIONS.FROM_SETUP_ID |
BOM_RESOURCE_SETUPS |
|
BOM_SETUP_TRANSITIONS.RESOURCE_ID
BOM_SETUP_TRANSITIONS.ORGANIZATION_ID BOM_SETUP_TRANSITIONS.TO_SETUP_ID |
BOM_RESOURCE_SETUPS |
BOM_RESOURCE_SETUPS stores resource setup information.
You will be able to specify multiple setups for each resource.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_RESOURCE_SETUPS_U1 | UNIQUE | APPS_TS_TX_IDX |
RESOURCE_ID
ORGANIZATION_ID SETUP_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| SETUP_ID | NUMBER | Y | Setup Type unique identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
BOM.BOM_RESOURCE_SETUPS does not reference any database object
BOM.BOM_RESOURCE_SETUPS is referenced by following:
| Description: | Resource shift information |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_RESOURCE_SHIFTS.DEPARTMENT_ID
BOM_RESOURCE_SHIFTS.RESOURCE_ID |
BOM_DEPARTMENT_RESOURCES |
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_RESOURCE_CHANGES.DEPARTMENT_ID
BOM_RESOURCE_CHANGES.RESOURCE_ID BOM_RESOURCE_CHANGES.SHIFT_NUM |
BOM_RESOURCE_SHIFTS |
BOM_RESOURCE_SHIFTS stores information about shifts that
you assign to resources. This table is a child of
BOM_DEPARTMENT_RESOURCES. You can assign multiple shifts
to a resource in a department if the resource is not
a 24 hour resource.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_RESOURCE_SHIFTS_U1 | UNIQUE | APPS_TS_TX_IDX |
DEPARTMENT_ID
RESOURCE_ID SHIFT_NUM |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| SHIFT_NUM | NUMBER | Y | Shift number | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| CAPACITY_UNITS | NUMBER | Resource Capacity |
BOM.BOM_RESOURCE_SHIFTS does not reference any database object
BOM.BOM_RESOURCE_SHIFTS is referenced by following:
| Description: | Resource Instances modifications |
|---|
BOM_RES_INSTANCE_CHANGES stores information about capacity modifications
for a resource on a resource change. This table is a child of BOM_RESOURCE_CHANGES.
You can define multiple resource instance changes for a resource change.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_RES_INSTANCE_CHANGES_U1 | UNIQUE | APPS_TS_TX_IDX |
DEPARTMENT_ID
RESOURCE_ID SHIFT_NUM SIMULATION_SET FROM_DATE FROM_TIME TO_DATE TO_TIME INSTANCE_ID SERIAL_NUMBER ACTION_TYPE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| SHIFT_NUM | NUMBER | Y | Shift number | |
| SIMULATION_SET | VARCHAR2 | (10) | Y | Simulation set identifier |
| FROM_DATE | DATE | Y | Capacity exception from date | |
| FROM_TIME | NUMBER | Capacity exception from time | ||
| TO_DATE | DATE | Capacity exception to date | ||
| TO_TIME | NUMBER | Capacity exception to time | ||
| INSTANCE_ID | NUMBER | Y | Instance identifier of the department resource | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Serial number of the equipment type resource | |
| ACTION_TYPE | NUMBER | Y | Type of capacity modification | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CAPACITY_CHANGE | NUMBER | Capacity change | ||
| REASON_CODE | VARCHAR2 | (80) | Reason code | |
| DOWNTIME_SOURCE_CODE | NUMBER | Code to identify source of the maintenance downtime | ||
| WIP_ENTITY_ID | NUMBER | Unique identifier of Maintenance Work Order | ||
| OPERATION_SEQ_NUM | NUMBER | Operation Sequence Number of the maintenance work order | ||
| MAINTENANCE_ORGANIZATION_ID | NUMBER | Organization performing maintenance work order | ||
| DOWNTIME_GROUP_ID | NUMBER | Unique batch identifier of the Load Production Equipment Downtime Process | ||
| DOWNTIME_NEGOTIABLE_FLAG | NUMBER | Downtime negotiable flag |
BOM.BOM_RES_INSTANCE_CHANGES does not reference any database object
BOM.BOM_RES_INSTANCE_CHANGES is referenced by following:
| Description: | Used in XML Routing Header import process |
|---|
BOM_RTGHEADER_TEMP stores OAG Bom Header Info which is converted to Oracle Routing header during xml routing import process.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ASSEMBLY_ITEM_NAME | VARCHAR2 | (81) | Y | Assembly item name |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Y | Organization code |
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | Alternate routing code | |
| ENG_ROUTING_FLAG | NUMBER | Y | Engineering routing flag | |
| COMMON_ASSEMBLY_ITEM_NAME | VARCHAR2 | (81) | Common assembly item name | |
| ROUTING_COMMENT | VARCHAR2 | (240) | Routing comment | |
| COMPLETION_SUBINVENTORY | VARCHAR2 | (10) | Completion subinventory | |
| COMPLETION_LOCATION_NAME | VARCHAR2 | (81) | Completion location name | |
| LINE_CODE | VARCHAR2 | (10) | Line code | |
| CFM_ROUTING_FLAG | NUMBER | CFM routing flag | ||
| MIXED_MODEL_MAP_FLAG | NUMBER | Mixed model map flag | ||
| PRIORITY | NUMBER | Priority | ||
| TOTAL_CYCLE_TIME | NUMBER | Total cycle time | ||
| CTP_FLAG | NUMBER | CTP flag | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RETURN_STATUS | VARCHAR2 | (1) | Return status | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system reference | |
| TRANSACTION_TYPE | VARCHAR2 | (30) | Y | Transaction type |
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Delete group name | |
| DG_DESCRIPTION | VARCHAR2 | (240) | Delete group description | |
| REVISION_NAME | VARCHAR2 | (3) | Revision name | |
| REVISION_START_EFF_DATE | DATE | Revision start effective date | ||
| REVISION_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| REVISION_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REVISION_RETURN_STATUS | VARCHAR2 | (1) | Revision return status | |
| REVISION_TRANSACTION_TYPE | VARCHAR2 | (30) | Revision transaction type | |
| REVISION_ORIG_SYS_REFERENCE | VARCHAR2 | (50) | Revision original system reference | |
| TRANSACTION_ID | NUMBER | Y | Transaction identifier | |
| TRANSACTION_GROUP_ID | NUMBER | Y | Transaction group identifier |
BOM.BOM_RTGHEADER_TEMP does not reference any database object
BOM.BOM_RTGHEADER_TEMP is referenced by following:
| Description: | Routing revisions archive |
|---|
Used by Delete Group program to archive deleted routing revisions.
This table only contains rows deleted as a result of a cascade delete
on routings.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| PROCESS_REVISION | VARCHAR2 | (3) | Y | Routing revision code |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| ECN_INITIATION_DATE | DATE | ECO initiation date | ||
| IMPLEMENTATION_DATE | DATE | ECO implementation date | ||
| IMPLEMENTED_SERIAL_NUMBER | VARCHAR2 | (30) | (no longer used) | |
| EFFECTIVITY_DATE | DATE | Y | Revision effectivity date | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who column | ||
| PROGRAM_ID | NUMBER | Standard Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who column | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Revised item sequence identifier |
BOM.BOM_RTG_ITEM_REVISIONS_ARCHIVE does not reference any database object
BOM.BOM_RTG_ITEM_REVISIONS_ARCHIVE is referenced by following:
| Description: | Used in XML Routing Network import Process |
|---|
BOM_RTG_NETWORK_TEMP stores OAG routing network which is converted to Oracle routing network during xml routing import process.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ASSEMBLY_ITEM_NAME | VARCHAR2 | (81) | Y | Inventory item name of manufactured assembly |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Y | Organization code |
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | Alternate routing code | |
| OPERATION_TYPE | NUMBER | Y | Operation type | |
| FROM_OP_SEQ_NUMBER | NUMBER | Y | From routing operation sequence number | |
| NEW_FROM_OP_SEQ_NUMBER | NUMBER | New from routing operation sequence number | ||
| FROM_START_EFFECTIVE_DATE | DATE | From routing operation sequence effective start date | ||
| NEW_FROM_START_EFFECTIVE_DATE | DATE | New from routing operation sequence effective start date | ||
| TO_OP_SEQ_NUMBER | NUMBER | Y | To routing operation sequence number | |
| NEW_TO_OP_SEQ_NUMBER | NUMBER | New to routing operation sequence number | ||
| TO_START_EFFECTIVE_DATE | DATE | To routing operation sequence effective start date | ||
| NEW_TO_START_EFFECTIVE_DATE | DATE | New to routing operation sequence effective start date | ||
| CONNECTION_TYPE | NUMBER | Connection type | ||
| PLANNING_PERCENT | NUMBER | Planning percentage | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RETURN_STATUS | VARCHAR2 | (1) | Return status | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system reference | |
| TRANSACTION_TYPE | VARCHAR2 | (30) | Transaction type | |
| TRANSACTION_ID | NUMBER | Y | Transaction identifier | |
| TRANSACTION_GROUP_ID | NUMBER | Y | Transaction group identifier | |
| FROM_X_COORDINATE | NUMBER | X-coordinate of from operation | ||
| FROM_Y_COORDINATE | NUMBER | Y-coordinate of from operation | ||
| TO_X_COORDINATE | NUMBER | X-coordinate of to operation | ||
| TO_Y_COORDINATE | NUMBER | Y-coordinate of to operation |
BOM.BOM_RTG_NETWORK_TEMP does not reference any database object
BOM.BOM_RTG_NETWORK_TEMP is referenced by following:
| Description: | Used in XML Routing Import Process |
|---|
BOM_RTG_OPERATION_TEMP stores OAG routing operations that are converted to Oracle routing operations during xml routing import process.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ASSEMBLY_ITEM_NAME | VARCHAR2 | (81) | Y | Assembly item name |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Y | Organization code |
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | Alternate routing code | |
| OPERATION_SEQUENCE_NUMBER | NUMBER | Y | Operation sequence number | |
| OPERATION_TYPE | NUMBER | Operation type | ||
| START_EFFECTIVE_DATE | DATE | Y | Effective start date | |
| NEW_OPERATION_SEQUENCE_NUMBER | NUMBER | New operation sequence number | ||
| NEW_START_EFFECTIVE_DATE | DATE | New effective start date | ||
| STANDARD_OPERATION_CODE | VARCHAR2 | (4) | Y | Standard operation code |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | Department code |
| OP_LEAD_TIME_PERCENT | NUMBER | Lead time percent | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | Minimum transfer quantity | ||
| COUNT_POINT_TYPE | NUMBER | Count point type | ||
| OPERATION_DESCRIPTION | VARCHAR2 | (240) | Operation description | |
| DISABLE_DATE | DATE | Disable date | ||
| BACKFLUSH_FLAG | NUMBER | Backflush flag | ||
| OPTION_DEPENDENT_FLAG | NUMBER | Option dependent flag | ||
| REFERENCE_FLAG | NUMBER | Reference flag | ||
| PROCESS_SEQ_NUMBER | NUMBER | Process sequence number | ||
| PROCESS_CODE | VARCHAR2 | (4) | Process code | |
| LINE_OP_SEQ_NUMBER | NUMBER | Line operation sequence number | ||
| LINE_OP_CODE | VARCHAR2 | (4) | Line operation code | |
| YIELD | NUMBER | Process yield at this operation | ||
| CUMULATIVE_YIELD | NUMBER | Cumulative process yield from begining of routing to this operation | ||
| REVERSE_CUM_YIELD | NUMBER | Cumulative process yield from end of routing to comparable operation | ||
| USER_LABOR_TIME | NUMBER | User calculated run time attributable to labor | ||
| USER_MACHINE_TIME | NUMBER | User calculated run time attributable to machines | ||
| NET_PLANNING_PERCENT | NUMBER | Cumulative planning percents derived from the operation network | ||
| INCLUDE_IN_ROLLUP | NUMBER | Indicates whether operation yield is to be considered in cost rollup | ||
| OP_YIELD_ENABLED_FLAG | NUMBER | Indicates whether operation yield is to be considered during costing. | ||
| SHUTDOWN_TYPE | VARCHAR2 | (30) | Shutdown type | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RETURN_STATUS | VARCHAR2 | (1) | Return status | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system reference | |
| TRANSACTION_TYPE | VARCHAR2 | (30) | Transaction type | |
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Delete group name | |
| DG_DESCRIPTION | VARCHAR2 | (240) | Delete group description | |
| TRANSACTION_ID | NUMBER | Y | Transaction identifier | |
| TRANSACTION_GROUP_ID | NUMBER | Y | Transaction group identifier |
BOM.BOM_RTG_OPERATION_TEMP does not reference any database object
BOM.BOM_RTG_OPERATION_TEMP is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ASSEMBLYITEMNAME | VARCHAR2 | (81) | ||
| ORGANIZATIONCODE | VARCHAR2 | (3) | ||
| ALTERNATEROUTINGCODE | VARCHAR2 | (10) | ||
| OPERATIONSEQUENCENUMBER | NUMBER | |||
| OPERATIONTYPE | NUMBER | |||
| STARTEFFECTIVEDATE | VARCHAR2 | (19) | ||
| RESOURCESEQUENCENUMBER | NUMBER | |||
| RESOURCECODE | VARCHAR2 | (10) | ||
| ACTIVITY | VARCHAR2 | (10) | ||
| STANDARDRATEFLAG | NUMBER | |||
| ASSIGNEDUNITS | VARCHAR2 | (150) | ||
| USAGERATEORAMOUNT | VARCHAR2 | (150) | ||
| USAGERATEORAMOUNTINVERSE | VARCHAR2 | (150) | ||
| BASISTYPE | NUMBER | |||
| SCHEDULEFLAG | NUMBER | |||
| RESOURCEOFFSETPERCENT | VARCHAR2 | (150) | ||
| AUTOCHARGETYPE | NUMBER | |||
| SCHEDULESEQUENCENUMBER | NUMBER | |||
| PRINCIPLEFLAG | NUMBER | |||
| ATTRIBUTECATEGORY | VARCHAR2 | (30) | ||
| ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ATTRIBUTE15 | VARCHAR2 | (150) | ||
| ORIGINALSYSTEMREFERENCE | VARCHAR2 | (50) | ||
| SETUPTYPE | VARCHAR2 | (30) | ||
| SUBSTITUTEGROUPNUMBER | NUMBER |
BOM.BOM_RTG_OPER_RES_TEMP does not reference any database object
BOM.BOM_RTG_OPER_RES_TEMP is referenced by following:
| Description: | Used in XML Routing Resource Import Process |
|---|
BOM_RTG_RESOURCE_TEMP stores the OAG routing operation resources that are converted to Oracle routing operations resources during xml routing import process.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ASSEMBLY_ITEM_NAME | VARCHAR2 | (81) | Y | Assembly item name |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Y | Organization code |
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | Alternate routing code | |
| OPERATION_SEQUENCE_NUMBER | NUMBER | Y | Operation sequence number | |
| OPERATION_TYPE | NUMBER | Operation type | ||
| OP_START_EFFECTIVE_DATE | DATE | Y | Operation effective start date | |
| RESOURCE_SEQUENCE_NUMBER | NUMBER | Y | Resource sequence number | |
| RESOURCE_CODE | VARCHAR2 | (10) | Y | Resource code |
| ACTIVITY | VARCHAR2 | (10) | Activity | |
| STANDARD_RATE_FLAG | NUMBER | Standard rate flag | ||
| ASSIGNED_UNITS | NUMBER | Assigned units | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Usage rate or amount | |
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Y | Inverse of usage rate or amount | |
| BASIS_TYPE | NUMBER | Basis type | ||
| SCHEDULE_FLAG | NUMBER | Schedule flag | ||
| RESOURCE_OFFSET_PERCENT | NUMBER | Resource offset percent | ||
| AUTOCHARGE_TYPE | NUMBER | Autocharge type | ||
| SCHEDULE_SEQUENCE_NUMBER | NUMBER | Schedule sequence number | ||
| PRINCIPLE_FLAG | NUMBER | Principal flag | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RETURN_STATUS | VARCHAR2 | (1) | Return status | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system reference | |
| TRANSACTION_TYPE | VARCHAR2 | (30) | Transaction type | |
| SETUP_TYPE | VARCHAR2 | (30) | Setup Type | |
| TRANSACTION_ID | NUMBER | Y | Transaction identifier | |
| TRANSACTION_GROUP_ID | NUMBER | Y | Transaction group identifier |
BOM.BOM_RTG_RESOURCE_TEMP does not reference any database object
BOM.BOM_RTG_RESOURCE_TEMP is referenced by following:
| Description: | Used in XML Routing substitute resource import process |
|---|
BOM_RTG_SUB_RESOURCE_TEMP stores OAG routing operation substitute resources that are converted to Oracle routing operations resources during xml routing import process.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ASSEMBLY_ITEM_NAME | VARCHAR2 | (81) | Y | Assembly item name |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Y | Organization code |
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | Alternate routing code | |
| OPERATION_SEQUENCE_NUMBER | NUMBER | Y | Operation sequence number | |
| OPERATION_TYPE | NUMBER | Operation type | ||
| OP_START_EFFECTIVE_DATE | DATE | Y | Operation effective start date | |
| SUB_RESOURCE_CODE | VARCHAR2 | (10) | Y | Substitute resource code |
| NEW_SUB_RESOURCE_CODE | VARCHAR2 | (10) | New substitute resource code | |
| SCHEDULE_SEQUENCE_NUMBER | NUMBER | Y | Schedule sequence number | |
| REPLACEMENT_GROUP_NUMBER | NUMBER | Y | Replacement group number | |
| ACTIVITY | VARCHAR2 | (10) | Activity | |
| STANDARD_RATE_FLAG | NUMBER | Standard rate flag | ||
| ASSIGNED_UNITS | NUMBER | Assigned units | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Usage rate or amount | |
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Y | Inverse of usage rate or amount | |
| BASIS_TYPE | NUMBER | Basis type | ||
| SCHEDULE_FLAG | NUMBER | Schedule flag | ||
| RESOURCE_OFFSET_PERCENT | NUMBER | Resource offset percent | ||
| AUTOCHARGE_TYPE | NUMBER | Autocharge type | ||
| PRINCIPLE_FLAG | NUMBER | Principal flag | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RETURN_STATUS | VARCHAR2 | (1) | Return status | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system reference | |
| TRANSACTION_TYPE | VARCHAR2 | (30) | Transaction type | |
| SETUP_TYPE | VARCHAR2 | (30) | Setup type | |
| TRANSACTION_ID | NUMBER | Y | Transaction identifier | |
| TRANSACTION_GROUP_ID | NUMBER | Y | Transaction group identifier |
BOM.BOM_RTG_SUB_RESOURCE_TEMP does not reference any database object
BOM.BOM_RTG_SUB_RESOURCE_TEMP is referenced by following:
| Description: |
|---|
This table stores the header information of a Rule.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_RULES_B_U1 | UNIQUE | APPS_TS_TX_IDX | RULE_ID |
| BOM_RULES_B_N1 | NONUNIQUE | APPS_TS_TX_IDX | BILL_SEQUENCE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RULE_ID | NUMBER | Y | Rule ID, which uniquely identifies the Rule. | |
| RULE_NAME | VARCHAR2 | (240) | Y | Name of the rule. |
| BILL_SEQUENCE_ID | NUMBER | Y | Structure's primary key. | |
| EFFECTIVE_DATE | DATE | Effective Date | ||
| DISABLE_DATE | DATE | Disable Date | ||
| LAST_UPDATE_DATE | DATE | Y | Standard WHO coloumn | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO coloumn | |
| CREATION_DATE | DATE | Y | Standard WHO coloumn | |
| CREATED_BY | NUMBER | Y | Standard WHO coloumn | |
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO coloumn | ||
| REQUEST_ID | NUMBER | Standard WHO coloumn | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard WHO coloumn | ||
| PROGRAM_ID | NUMBER | Standard WHO coloumn | ||
| PROGRAM_UPDATE_DATE | DATE | Standard WHO coloumn | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Standard DFF Column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Standard DFF Column | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Standard DFF Column | |
| CHANGE_ID | NUMBER | Change ID, which uniquely identifies the ECO | ||
| IMPLEMENTATION_DATE | DATE | Implementation Date |
BOM.BOM_RULES_B does not reference any database object
BOM.BOM_RULES_B is referenced by following:
| Description: | Setup Transitions |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_SETUP_TRANSITIONS.RESOURCE_ID
BOM_SETUP_TRANSITIONS.ORGANIZATION_ID BOM_SETUP_TRANSITIONS.FROM_SETUP_ID |
BOM_RESOURCE_SETUPS |
|
BOM_SETUP_TRANSITIONS.RESOURCE_ID
BOM_SETUP_TRANSITIONS.ORGANIZATION_ID BOM_SETUP_TRANSITIONS.TO_SETUP_ID |
BOM_RESOURCE_SETUPS |
BOM_SETUP_TRANSITIONS stores setup transition information.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_SETUP_TRANSITIONS_U1 | UNIQUE | APPS_TS_TX_IDX |
RESOURCE_ID
ORGANIZATION_ID FROM_SETUP_ID TO_SETUP_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| FROM_SETUP_ID | NUMBER | Setup Type unique identifier | ||
| TO_SETUP_ID | NUMBER | Y | Setup Type unique identifier | |
| TRANSITION_TIME | NUMBER | Y | Transition Time | |
| TRANSITION_UOM | VARCHAR2 | (3) | Y | Transition UOM |
| TRANSITION_PENALTY | NUMBER | Transition Penalty | ||
| OPERATION_ID | NUMBER | Operation identifier | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
BOM.BOM_SETUP_TRANSITIONS does not reference any database object
BOM.BOM_SETUP_TRANSITIONS is referenced by following:
| Description: | Setup Types |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_RESOURCE_SETUPS.SETUP_ID | BOM_SETUP_TYPES |
BOM_SETUP_TYPES stores setup types information.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_SETUP_TYPES_U1 | UNIQUE | APPS_TS_TX_IDX | SETUP_ID |
| BOM_SETUP_TYPES_U2 | UNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
SETUP_CODE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SETUP_ID | NUMBER | Y | Setup Type unique identifier | |
| SETUP_CODE | VARCHAR2 | (10) | Y | Setup code |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier |
BOM.BOM_SETUP_TYPES does not reference any database object
BOM.BOM_SETUP_TYPES is referenced by following:
| Description: | Workday calendar shift dates |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_SHIFT_DATES.CALENDAR_CODE
BOM_SHIFT_DATES.SHIFT_NUM |
BOM_CALENDAR_SHIFTS |
| BOM_SHIFT_DATES.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
| Foreign Key Column | Foreign Table |
|---|---|
|
CRP_CAL_SHIFT_DELTA.CALENDAR_CODE
CRP_CAL_SHIFT_DELTA.EXCEPTION_SET_ID CRP_CAL_SHIFT_DELTA.SHIFT_NUM CRP_CAL_SHIFT_DELTA.CALENDAR_DATE |
BOM_SHIFT_DATES |
BOM_SHIFT_DATES stores information about compiled data for shift
calendars. This table stores every date between the calendar start
date and calendar end date for a calendar name and exception set. The
workday calendar program assigns a sequence number starting at 1, to
each date. The program generates the prior sequence number and next
sequence number for every calendar date that is stored in this table.
This table stores values for sequence number, prior sequence number
and next sequence number for a non-working day. The values for these
columns are equal to a working day. The workday calendar program
generates a shift calendar for each shift you define for your
calendar.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_SHIFT_DATES_U1 | UNIQUE | APPS_TS_TX_IDX |
CALENDAR_CODE
EXCEPTION_SET_ID SHIFT_DATE SHIFT_NUM |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| EXCEPTION_SET_ID | NUMBER | Y | Exception set unique identifier | |
| SHIFT_NUM | NUMBER | Y | Shift number | |
| SHIFT_DATE | DATE | Y | Calendar date | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| SEQ_NUM | NUMBER | Sequence number for shift date (only for working dates) | ||
| NEXT_SEQ_NUM | NUMBER | Y | Next sequence number for calendar date (working day) | |
| PRIOR_SEQ_NUM | NUMBER | Y | Prior sequence number for calendar date (working day) | |
| NEXT_DATE | DATE | Y | Next date corresponding to next sequence number | |
| PRIOR_DATE | DATE | Y | Prior date corresponding to prior sequence number | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_SHIFT_DATES does not reference any database object
BOM.BOM_SHIFT_DATES is referenced by following:
| Description: | Workday calendar shift exceptions |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_SHIFT_EXCEPTIONS.CALENDAR_CODE
BOM_SHIFT_EXCEPTIONS.SHIFT_NUM |
BOM_CALENDAR_SHIFTS |
| BOM_SHIFT_EXCEPTIONS.EXCEPTION_SET_ID | BOM_EXCEPTION_SETS |
BOM_SHIFT_EXCEPTIONS stores information about exception dates for a
calendar name, exception set, and shift. You can define these
exception dates to be either working or non-working (EXCEPTION_TYPE 1
for On and 2 for Off). The workday calendar program generates all
dates between calendar start date and calendar end date. It then marks
the workday pattern on generated dates followed by the base calendar
exception dates. Finally, it marks the shift exception dates. This
table stores exception dates for the shift calendars, the table
BOM_CALENDAR_EXCEPTIONS stores exception dates for the base calendar.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_SHIFT_EXCEPTIONS_U1 | UNIQUE | APPS_TS_TX_IDX |
CALENDAR_CODE
EXCEPTION_SET_ID SHIFT_NUM EXCEPTION_DATE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| SHIFT_NUM | NUMBER | Y | Shift number | |
| EXCEPTION_SET_ID | NUMBER | Y | Exception set unique identifier | |
| EXCEPTION_DATE | DATE | Y | Exception Date | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| CREATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| EXCEPTION_TYPE | NUMBER | Y | Exception type (On and Off) | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
BOM.BOM_SHIFT_EXCEPTIONS does not reference any database object
BOM.BOM_SHIFT_EXCEPTIONS is referenced by following:
| Description: | Workday calendar shift times |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_SHIFT_TIMES.CALENDAR_CODE
BOM_SHIFT_TIMES.SHIFT_NUM |
BOM_CALENDAR_SHIFTS |
BOM_SHIFT_TIMES stores information about shift hours for your shifts.
You cannot have overlapping shift hours. You can define shifts that
go beyond midnight (24:00).
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_SHIFT_TIMES_U1 | UNIQUE | APPS_TS_TX_IDX |
CALENDAR_CODE
SHIFT_NUM FROM_TIME TO_TIME |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| SHIFT_NUM | NUMBER | Y | Shift number | |
| FROM_TIME | NUMBER | Y | Shift start time | |
| TO_TIME | NUMBER | Y | Shift end time | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
BOM.BOM_SHIFT_TIMES does not reference any database object
BOM.BOM_SHIFT_TIMES is referenced by following:
| Description: | Temporary data for indented bills of material (on-line processes) |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_SMALL_EXPL_TEMP.TOP_BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
| BOM_SMALL_EXPL_TEMP.BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
|
BOM_SMALL_EXPL_TEMP.TOP_ITEM_ID
BOM_SMALL_EXPL_TEMP.ORGANIZATION_ID BOM_SMALL_EXPL_TEMP.TOP_ALTERNATE_DESIGNATOR |
BOM_STRUCTURES_B |
| BOM_SMALL_EXPL_TEMP.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
BOM_SMALL_EXPL_TEMP stores temporary, indented bill of material
structures for online processes (Indented Inquiry). The explosion
process (BOMPEXPL) populates this table when exploding a single or a
range of bills of material.
.
GROUP_ID identifies all rows generated from an explosion.
.
TOP_BILL_SEQUENCE_ID is the bill sequence id of the exploded bill.
.
The explosion process constructs SORT_ORDER that correctly determines
the node of the row in the bill structure. You must order the rows by
SORT_ORDER to retrieve the correct bill structure. The following
information shows an example of how the sort order is determined
(inventory_item_ids are in parentheses).
.
.
=
A (11)
|
+------+------+
| |
B(12) C(13)
| |
+--+--+ +--+--+
| | | |
D(14) E(15) F(16) G(17)
=
.
=
Component Sort_order
--------- ----------
A 001
B 001001
C 001002
D 001001001
E 001001002
F 001002001
G 001002002
=
.
When you select and order by SORT_ORDER, you get:
=
A
.B
..D
..E
.C
..F
..G
=
.
The bill loop check process uses COMPONENT_CODE to detect loops.
COMPONENT_CODE stores the concatention of item ids down any branch in
the indented structure tree. The explosion process left pads the ids
with 0s up to 16 characters. For example:
.
=
Component Component_code
--------- ---------------------------------------------
.
A 0000000000000011
B 0000000000000011000000000000012
C 0000000000000011000000000000013
D 0000000000000011000000000000012000000000000014
E 0000000000000011000000000000012000000000000015
F 0000000000000011000000000000013000000000000016
G 0000000000000011000000000000013000000000000017
=
.
The explosion and bill loop check processes set the LOOP_FLAG to 1, if
a loop is detected in the assembly.
.
.
.
.
.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TOP_BILL_SEQUENCE_ID | NUMBER | Y | Bill identifier of level 0 items | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| PLAN_LEVEL | NUMBER | Y | Level in bill | |
| EXTENDED_QUANTITY | NUMBER | Y | Extended quantity including quantity per, yield, and shrinkage | |
| SORT_ORDER | VARCHAR2 | (2000) | Sorting sequence for the explosion | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| GROUP_ID | NUMBER | Explosion identifier | ||
| SESSION_ID | NUMBER | Session identifier | ||
| SELECT_FLAG | VARCHAR2 | (1) | Whether this component has been ordered | |
| SELECT_QUANTITY | NUMBER | Order quantity | ||
| EXTEND_COST_FLAG | NUMBER | Whether to extend cost for this item | ||
| TOP_ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate designator for level 0 | |
| TOP_ITEM_ID | NUMBER | Item identifier of level 0 item | ||
| CONTEXT | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| HEADER_ID | NUMBER | System-generated identifier of order header | ||
| LINE_ID | NUMBER | System-generated identifier of order, configuration, or shipment schedule line | ||
| LIST_PRICE | NUMBER | The price of the item on the price list | ||
| SELLING_PRICE | NUMBER | Actual price charged to customer | ||
| COMPONENT_YIELD_FACTOR | NUMBER | Component yield | ||
| ITEM_COST | NUMBER | Item unit cost | ||
| INCLUDE_IN_ROLLUP_FLAG | NUMBER | Flag indicating if component is to be used when rolling up costs | ||
| BASED_ON_ROLLUP_FLAG | NUMBER | Flag indicating whether cost will be rolled up | ||
| ACTUAL_COST_TYPE_ID | NUMBER | Actual cost type identifier | ||
| COMPONENT_QUANTITY | NUMBER | Quantity of component in bill of material | ||
| SHRINKAGE_RATE | NUMBER | Planned shrinkage rate | ||
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Entry to determine how many units of component to put on an order | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill of material | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| CHECK_ATP | NUMBER | Flag indicating if ATP check is required | ||
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to ship | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is included on shipping documents | ||
| INCLUDE_ON_BILL_DOCS | NUMBER | Flag indicating if component is included on billing documents | ||
| LOW_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| HIGH_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| PICK_COMPONENTS | NUMBER | (not currently used) | ||
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | Unit of measure code of component | |
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (25) | Unit of measure of component | |
| BASE_ITEM_ID | NUMBER | Base item identifier | ||
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | Flag indicating whether item may have components requiring ATP check | |
| ATP_FLAG | VARCHAR2 | (1) | Flag indicating ATP must be checked when item is ordered | |
| BOM_ITEM_TYPE | NUMBER | Type of item | ||
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | Flag indicating all shippable components of should be picked | |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | Assemble to order flag | |
| SHIPPABLE_ITEM_FLAG | VARCHAR2 | (1) | Flag indicating shippable item | |
| CUSTOMER_ORDER_FLAG | VARCHAR2 | (1) | Flag indicating customer orderable item | |
| INTERNAL_ORDER_FLAG | VARCHAR2 | (1) | Flag indicating internal order | |
| CUSTOMER_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | Flag indicating item is customer orderable | |
| INTERNAL_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | Flag indicating item can be internally ordered | |
| SO_TRANSACTIONS_FLAG | VARCHAR2 | (1) | Sales order transactions flag | |
| MTL_TRANSACTIONS_ENABLED_FLAG | VARCHAR2 | (1) | Flag indicating item is transactable | |
| STOCK_ENABLED_FLAG | VARCHAR2 | (1) | Flag indicating item is stockable | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ASSEMBLY_ITEM_ID | NUMBER | Assembly item identifier | ||
| CONFIGURATOR_FLAG | VARCHAR2 | (1) | Flag indicating if component is used by the configurator form | |
| PRICE_LIST_ID | NUMBER | System-generated identifier of price list | ||
| ROUNDING_FACTOR | NUMBER | Rounding factor used to determine order quantity | ||
| PRICING_CONTEXT | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| PRICING_ATTRIBUTE1 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE2 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE3 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE4 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE5 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE6 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE7 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE8 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE9 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE10 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE11 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE12 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE13 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE14 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| PRICING_ATTRIBUTE15 | VARCHAR2 | (150) | User defined attribute that adjusts the list price of an item | |
| COMPONENT_CODE | VARCHAR2 | (4000) | Concatenation of component item identifiers | |
| LOOP_FLAG | NUMBER | Indicates whether a loop is detected | ||
| INVENTORY_ASSET_FLAG | NUMBER | Flag indicating item is an inventory asset | ||
| PLANNING_FACTOR | NUMBER | Factor used to multiply component quantity with to obtain planning quantity | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| PARENT_BOM_ITEM_TYPE | NUMBER | Parent item's bom item type | ||
| WIP_SUPPLY_TYPE | NUMBER | Supply type | ||
| ITEM_NUM | NUMBER | Item sequence within bill of material structure | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| DISABLE_DATE | DATE | Disable date | ||
| IMPLEMENTATION_DATE | DATE | Date on which engineering change order was implemented | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator identifier | ||
| COMPONENT_REMARKS | VARCHAR2 | (240) | Component remarks | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Operation offset from first operation in routing | ||
| REXPLODE_FLAG | NUMBER | Flag indicating whether to re-explode | ||
| COMMON_BILL_SEQUENCE_ID | NUMBER | Common bill of material unique identifier | ||
| OPERATION_OFFSET | NUMBER | Component's lead time | ||
| CURRENT_REVISION | VARCHAR2 | (3) | Component's item revision | |
| LOCATOR | VARCHAR2 | (40) | Component's supply locator | |
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | Indicates the first unit number of an item to be included | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | Indicates the last unit number of an item to be included | |
| BASIS_TYPE | NUMBER | Basis type identifier |
BOM.BOM_SMALL_EXPL_TEMP does not reference any database object
BOM.BOM_SMALL_EXPL_TEMP is referenced by following:
| Description: | Temporary data for item usage (View Item Usage window) |
|---|
BOM_SMALL_IMPL_TEMP stores temporary information about where an item
is used in a bill of material structure. The item implosion process
generates this information by recursively travelling up the bill of
material structure. This table is used by the View Item Usage window.
.
SEQUENCE_ID is the unique identifier for each implosion process.
.
LOWEST_ITEM_ID is the item that you are imploding. CURRENT_ITEM_ID is
the item id of the current row. PARENT_ITEM_ID is the item id of the
parent of the current item. LOWEST_ALTERNATE_DESIGNATOR is the
alternate of each first level parent of the imploded item.
.
SORT_CODE stores information about a particular node in the indented
structure. You must order the rows by SORT_ORDER to retrieve the
correct bill structure. The following example shows how the sort
order is determined (inventory_item_ids are in parentheses).
.
=
A (11)
|
+------+------+
| |
B(12) C(13)
| |
+----+----+ +----+----+
| | | |
D(14) E(15) F(16) G(17)
|
F(16)
=
.
An implosion of item F will generate the following sort orders:
.
=
Item Sort Order
---------- ------------------------------
F 001
D 001001
C 001002
B 001001001
A 001002001
A 001001001001
=
.
When you select and order by SORT_ORDER, you get:
=
F
.D
..B
...A
.C
..A
=
.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_SMALL_IMPL_TEMP_N1 | NONUNIQUE | SEQUENCE_ID | |
| BOM_SMALL_IMPL_TEMP_N2 | NONUNIQUE | CURRENT_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_ID | NUMBER | Y | Implosion identifier | |
| LOWEST_ITEM_ID | NUMBER | Y | Identifier of item to implode | |
| CURRENT_ITEM_ID | NUMBER | Y | Item identifier of current component | |
| PARENT_ITEM_ID | NUMBER | Assembly item identifier | ||
| ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate bom designator | |
| CURRENT_LEVEL | NUMBER | Y | Implosion level | |
| SORT_CODE | VARCHAR2 | (240) | Y | Sort sequence |
| LOWEST_ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate bom designator of level 1 items | |
| CURRENT_ASSEMBLY_TYPE | NUMBER | Assembly type | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| DISABLE_DATE | DATE | Disable date | ||
| COMPONENT_QUANTITY | NUMBER | Component quantity | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Revised item unique identifier | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | ECO Identifier | |
| IMPLEMENTED_FLAG | NUMBER | Indicator if component row is implemented or pending | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | Indicates the first unit number to be included | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | Indicates the first unit number to be included | |
| PARENT_SORT_CODE | VARCHAR2 | (240) | ||
| CURRENT_PK1_VALUE | VARCHAR2 | (50) | ||
| CURRENT_PK2_VALUE | VARCHAR2 | (50) | ||
| CURRENT_PK3_VALUE | VARCHAR2 | (50) | ||
| CURRENT_PK4_VALUE | VARCHAR2 | (50) | ||
| CURRENT_PK5_VALUE | VARCHAR2 | (50) | ||
| CURRENT_OBJ_NAME | VARCHAR2 | (50) | ||
| PARENT_PK1_VALUE | VARCHAR2 | (50) | ||
| PARENT_PK2_VALUE | VARCHAR2 | (50) | ||
| PARENT_PK3_VALUE | VARCHAR2 | (50) | ||
| PARENT_PK4_VALUE | VARCHAR2 | (50) | ||
| PARENT_PK5_VALUE | VARCHAR2 | (50) | ||
| PARENT_OBJ_NAME | VARCHAR2 | (50) | ||
| LOWEST_PK1_VALUE | VARCHAR2 | (50) | ||
| LOWEST_PK2_VALUE | VARCHAR2 | (50) | ||
| LOWEST_PK3_VALUE | VARCHAR2 | (50) | ||
| LOWEST_PK4_VALUE | VARCHAR2 | (50) | ||
| LOWEST_PK5_VALUE | VARCHAR2 | (50) | ||
| LOWEST_OBJ_NAME | VARCHAR2 | (50) | ||
| TOP_ITEM_FLAG | VARCHAR2 | (1) | ||
| IMPLOSION_DATE | DATE | |||
| CURRENT_GTIN_NUMBER | VARCHAR2 | (25) | ||
| CURRENT_GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| CURRENT_TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (240) | ||
| PARENT_GTIN_NUMBER | VARCHAR2 | (25) | ||
| PARENT_GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| PARENT_TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (240) | ||
| LOWEST_GTIN_NUMBER | VARCHAR2 | (25) | ||
| LOWEST_GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| LOWEST_TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (240) | ||
| PRIMARY_UOM_DESCRIPTOR | VARCHAR2 | (240) | Primary UOM Descriptor | |
| STRUCTURE_TYPE_ID | NUMBER | Structure Type Id | ||
| GTIN_PUBLICATION_STATUS | VARCHAR2 | (1) | ||
| ACCESS_FLAG | VARCHAR2 | (1) | ||
| COMPONENT_PATH | VARCHAR2 | (4000) | ||
| COMPONENT_ITEM_REVISION_ID | NUMBER | |||
| BASIS_TYPE | NUMBER | Basis type identifier | ||
| FROM_END_ITEM_REVISION | VARCHAR2 | (3) | ||
| TO_END_ITEM_REVISION | VARCHAR2 | (3) | ||
| EFFECTIVITY_CONTROL | NUMBER | |||
| IS_EXCLUDED_BY_RULE | VARCHAR2 | (1) |
BOM.BOM_SMALL_IMPL_TEMP does not reference any database object
BOM.BOM_SMALL_IMPL_TEMP is referenced by following:
| Description: | Standard operations |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_STANDARD_OPERATIONS.DEPARTMENT_ID | BOM_DEPARTMENTS |
| BOM_STANDARD_OPERATIONS.ORGANIZATION_ID | MTL_PARAMETERS |
| BOM_STANDARD_OPERATIONS.LINE_ID | WIP_LINES |
| Foreign Key Column | Foreign Table |
|---|---|
|
FLM_MMM_OPERATIONS.LINE_ID
FLM_MMM_OPERATIONS.OPERATION_TYPE FLM_MMM_OPERATIONS.STANDARD_OPERATION_ID |
BOM_STANDARD_OPERATIONS |
BOM_STANDARD_OPERATIONS stores information about the standard
operations, events, processes, and line operations that you
define. Events/processes/line operations are for Flow Manufacturing.
.
You can use these standard operations/events/processes/line
operations when you define routing steps to build your assembly.
The Define Routing window defaults all data for the standard
operation/events/processes/line operation into the routing step.
.
BOM_OPERATION_SEQUENCES and BOM_STANDARD_OPERATIONS share the
descriptive flex definition. Therefore, the Define Routing window
will also copy the descriptive flex information into the routing step.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_STANDARD_OPERATIONS_U1 | UNIQUE | APPS_TS_TX_IDX |
OPERATION_CODE
ORGANIZATION_ID OPERATION_TYPE LINE_ID |
| BOM_STANDARD_OPERATIONS_U2 | UNIQUE | APPS_TS_TX_IDX | STANDARD_OPERATION_ID |
| BOM_STANDARD_OPERATIONS_N1 | NONUNIQUE | APPS_TS_TX_IDX | ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_NUM | NUMBER | Operation sequence number, showing the sequences of processes and line operations | ||
| LINE_ID | NUMBER | WIP line identifier | ||
| OPERATION_TYPE | NUMBER | Operation Type: 1. Standard Operation/Event 2. Process 3. Line Operation | ||
| STANDARD_OPERATION_ID | NUMBER | Y | Standard operation unique identifier | |
| OPERATION_CODE | VARCHAR2 | (4) | Y | Standard operation code |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | Minimum operation transfer quantity | ||
| COUNT_POINT_TYPE | NUMBER | Count point | ||
| OPERATION_DESCRIPTION | VARCHAR2 | (240) | Specific operation description | |
| OPTION_DEPENDENT_FLAG | NUMBER | Indicates whether to use this operation in all configuration routings, even if no components of the configuration are used in this operation | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| BACKFLUSH_FLAG | NUMBER | Backflush at this operation | ||
| WMS_TASK_TYPE | NUMBER | WMS Task Type | ||
| INCLUDE_IN_ROLLUP | NUMBER | Include In Rollup | ||
| YIELD | NUMBER | Operation yield for an operation | ||
| OPERATION_YIELD_ENABLED | NUMBER | Indicates whether operation yield is to be considered during costing | ||
| SHUTDOWN_TYPE | VARCHAR2 | (30) | Shutdown type | |
| ACTUAL_IPK | NUMBER | Actual In-Process Kanbans | ||
| CRITICAL_TO_QUALITY | VARCHAR2 | (1) | Critical to quality | |
| VALUE_ADDED | VARCHAR2 | (1) | Value added | |
| DEFAULT_SUBINVENTORY | VARCHAR2 | (10) | Default subinventory | |
| DEFAULT_LOCATOR_ID | NUMBER | Default locator identifier | ||
| LOWEST_ACCEPTABLE_YIELD | NUMBER | Lowest Yield acceptable at this operation | ||
| USE_ORG_SETTINGS | NUMBER | User Organization Settings | ||
| QUEUE_MANDATORY_FLAG | NUMBER | Flag to set Queue intra-operation step mandatory | ||
| RUN_MANDATORY_FLAG | NUMBER | Flag to set Run intra-operation step mandatory | ||
| TO_MOVE_MANDATORY_FLAG | NUMBER | Flag to set Run intra-operation step mandatory | ||
| SHOW_NEXT_OP_BY_DEFAULT | NUMBER | Show next operation by default | ||
| SHOW_SCRAP_CODE | NUMBER | Show Scrap Code | ||
| SHOW_LOT_ATTRIB | NUMBER | Show Lot Attributes | ||
| TRACK_MULTIPLE_RES_USAGE_DATES | NUMBER | Track Multiple Resource Usage Dates | ||
| CHECK_SKILL | NUMBER | Check Skill |
BOM.BOM_STANDARD_OPERATIONS does not reference any database object
BOM.BOM_STANDARD_OPERATIONS is referenced by following:
| Description: | Standard Operation Bonus codes |
|---|
BOM_STD_OP_BONUS_CODES stores the information about the bonus codes for a standard operations.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_STD_OP_BONUS_CODES_U1 | UNIQUE | APPS_TS_TX_IDX |
STANDARD_OPERATION_ID
SEQUENCE_NUMBER BONUS_CODE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| STANDARD_OPERATION_ID | NUMBER | Y | Standard operation unique identifier | |
| SEQUENCE_NUMBER | NUMBER | Y | Sequence Number of the bonus code | |
| BONUS_CODE | NUMBER | Y | Bonus code | |
| CREATED_BY | NUMBER | Y | Standard WHO Column | |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO Column | |
| CREATION_DATE | DATE | Y | Standard WHO Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO Column |
BOM.BOM_STD_OP_BONUS_CODES does not reference any database object
BOM.BOM_STD_OP_BONUS_CODES is referenced by following:
| Description: | Standard operation resources |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_STD_OP_RESOURCES.ACTIVITY_ID | CST_ACTIVITIES |
BOM_STD_OP_RESOURCES stores information about resources you assign to
standard operations. You may assign multiple resources to your
standard operations.
.
When you use a standard operation to define your routing step, the
Define Routing window copies the standard operation resources as
operation resources. Since BOM_STD_OP_RESOURCES shares descriptive
flex definition with BOM_OPERATION_RESOURCES, the window will also
copy the descriptive flex information.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_STD_OP_RESOURCES_U1 | UNIQUE | APPS_TS_TX_IDX |
STANDARD_OPERATION_ID
RESOURCE_SEQ_NUM |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| STANDARD_OPERATION_ID | NUMBER | Y | Standard operation unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| RESOURCE_SEQ_NUM | NUMBER | Y | Resource sequence number | |
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Resource usage rate | |
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Y | Resource usage rate inverse | |
| BASIS_TYPE | NUMBER | Y | Basis type | |
| AUTOCHARGE_TYPE | NUMBER | Y | Charging for shop floor transactions | |
| STANDARD_RATE_FLAG | NUMBER | Y | Use standard rate for shopfloor transaction | |
| ASSIGNED_UNITS | NUMBER | Resource units assigned | ||
| SCHEDULE_FLAG | NUMBER | Y | Schedule this resource | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| SUBSTITUTE_GROUP_NUM | NUMBER | Substitue group number |
BOM.BOM_STD_OP_RESOURCES does not reference any database object
BOM.BOM_STD_OP_RESOURCES is referenced by following:
| Description: | Standard Operation responsibility exclusions |
|---|
BOM_STD_OP_RESP_EXCLUSIONS stores information about the responsibilities which are excluded from using this operation in Oracle Shop Floor Management.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_STD_OP_RESP_EXCLUSIONS_U1 | UNIQUE | APPS_TS_TX_IDX |
STANDARD_OPERATION_ID
RESPONSIBILITY_ID APPLICATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| STANDARD_OPERATION_ID | NUMBER | Y | Standard Operation Unique Identifier | |
| RESPONSIBILITY_ID | NUMBER | Y | Responsibility Unique Identifier | |
| APPLICATION_ID | NUMBER | Y | Application to which the current responsibility belongs to | |
| CREATED_BY | NUMBER | Y | Standard who columns | |
| CREATION_DATE | DATE | Y | Standard who columns | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who columns | |
| LAST_UPDATE_DATE | DATE | Y | Standard who columns | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who columns |
BOM.BOM_STD_OP_RESP_EXCLUSIONS does not reference any database object
BOM.BOM_STD_OP_RESP_EXCLUSIONS is referenced by following:
| Description: | Standard Operation Scrap Codes |
|---|
BOM_STD_OP_SCRAP_CODES stores the information about the scrap codes for a standard operations.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_STD_OP_SCRAP_CODES_U1 | UNIQUE | APPS_TS_TX_IDX |
STANDARD_OPERATION_ID
SEQUENCE_NUM SCRAP_CODE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| STANDARD_OPERATION_ID | NUMBER | Y | Standard Operation Unique Identtifier | |
| SEQUENCE_NUM | NUMBER | Y | Sequence number of the scrap code assigned | |
| SCRAP_CODE | NUMBER | Y | Scrap code | |
| MAX_ACCEPTABLE_SCRAP_QTY | NUMBER | Maximum acceptable scrap quantity | ||
| CREATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column |
BOM.BOM_STD_OP_SCRAP_CODES does not reference any database object
BOM.BOM_STD_OP_SCRAP_CODES is referenced by following:
| Description: |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_STD_SUB_OP_RESOURCES.RESOURCE_ID | BOM_RESOURCES |
| BOM_STD_SUB_OP_RESOURCES.ACTIVITY_ID | CST_ACTIVITIES |
BOM_STD_SUB_OP_RESOURCES stores Substitute Resource information for a particular operation for routing. Records in the table is identified by STANDARD_OPERATION_ID, RESOURCE_ID, SUBSTITUTE_GROUP_NUM, REPLACEMENT_GROUP_NUM and BASIS_TYPE.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_STD_SUB_OP_RESOURCES_U1 | UNIQUE | APPS_TS_TX_IDX |
STANDARD_OPERATION_ID
RESOURCE_ID SUBSTITUTE_GROUP_NUM REPLACEMENT_GROUP_NUM BASIS_TYPE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| STANDARD_OPERATION_ID | NUMBER | Y | Standard Operation Id | |
| RESOURCE_ID | NUMBER | Y | Resource Id | |
| SUBSTITUTE_GROUP_NUM | NUMBER | Y | Substitute group number | |
| REPLACEMENT_GROUP_NUM | NUMBER | Y | Replacement group number | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| STANDARD_RATE_FLAG | NUMBER | Y | Use standard rate for shopfloor transactions | |
| ASSIGNED_UNITS | NUMBER | Y | Resource units assigned | |
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Resource usage rate | |
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Y | Resource usage rate inverse | |
| BASIS_TYPE | NUMBER | Y | Basis type identifier | |
| SCHEDULE_FLAG | NUMBER | Y | Schedule the resource | |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO column | |
| CREATION_DATE | DATE | Y | Standard WHO column | |
| CREATED_BY | NUMBER | Y | Standard WHO column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO column | ||
| AUTOCHARGE_TYPE | NUMBER | Y | Autocharge type for shopfloor moves | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Attribute category | |
| REQUEST_ID | NUMBER | Concurrent WHO columns | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent WHO columns | ||
| PROGRAM_ID | NUMBER | Concurrent WHO columns | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent WHO columns | ||
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flex value | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SCHEDULE_SEQ_NUM | NUMBER | Schedule Sequence Number for Alternate Recources |
BOM.BOM_STD_SUB_OP_RESOURCES does not reference any database object
BOM.BOM_STD_SUB_OP_RESOURCES is referenced by following:
| Description: | Bills of material |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
BOM_STRUCTURES_B.ASSEMBLY_ITEM_ID
BOM_STRUCTURES_B.ORGANIZATION_ID |
MTL_SYSTEM_ITEMS_B |
|
BOM_STRUCTURES_B.PENDING_FROM_ECN
BOM_STRUCTURES_B.ORGANIZATION_ID |
ENG_ENGINEERING_CHANGES |
|
BOM_STRUCTURES_B.ALTERNATE_BOM_DESIGNATOR
BOM_STRUCTURES_B.ORGANIZATION_ID |
BOM_ALTERNATE_DESIGNATORS |
| BOM_STRUCTURES_B.COMMON_BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
|
BOM_STRUCTURES_B.COMMON_ASSEMBLY_ITEM_ID
BOM_STRUCTURES_B.COMMON_ORGANIZATION_ID |
MTL_SYSTEM_ITEMS_B |
| BOM_STRUCTURES_B.ORGANIZATION_ID | HR_ALL_ORGANIZATION_UNITS |
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_COMPONENT_OPERATIONS.BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
| BOM_COMPONENTS_B.BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
| BOM_DELETE_ENTITIES.BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
| BOM_DEPENDENT_DESC_ELEMENTS.BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
| BOM_EXPLOSION_TEMP.TOP_BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
| BOM_EXPLOSION_TEMP.BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
|
BOM_EXPLOSION_TEMP.TOP_ITEM_ID
BOM_EXPLOSION_TEMP.ORGANIZATION_ID BOM_EXPLOSION_TEMP.TOP_ALTERNATE_DESIGNATOR |
BOM_STRUCTURES_B |
| BOM_SMALL_EXPL_TEMP.TOP_BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
| BOM_SMALL_EXPL_TEMP.BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
|
BOM_SMALL_EXPL_TEMP.TOP_ITEM_ID
BOM_SMALL_EXPL_TEMP.ORGANIZATION_ID BOM_SMALL_EXPL_TEMP.TOP_ALTERNATE_DESIGNATOR |
BOM_STRUCTURES_B |
| BOM_STRUCTURES_B.COMMON_BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
| ENG_REVISED_ITEMS.BILL_SEQUENCE_ID | BOM_STRUCTURES_B |
| WIP_DISCRETE_JOBS.COMMON_BOM_SEQUENCE_ID | BOM_STRUCTURES_B |
|
WIP_JOB_SCHEDULE_INTERFACE.PRIMARY_ITEM_ID
WIP_JOB_SCHEDULE_INTERFACE.ORGANIZATION_ID WIP_JOB_SCHEDULE_INTERFACE.ALTERNATE_BOM_DESIGNATOR |
BOM_STRUCTURES_B |
|
WIP_FLOW_SCHEDULES.PRIMARY_ITEM_ID
WIP_FLOW_SCHEDULES.ORGANIZATION_ID WIP_FLOW_SCHEDULES.ALTERNATE_BOM_DESIGNATOR |
BOM_STRUCTURES_B |
|
WIP_REPETITIVE_ITEMS.PRIMARY_ITEM_ID
WIP_REPETITIVE_ITEMS.ORGANIZATION_ID WIP_REPETITIVE_ITEMS.ALTERNATE_BOM_DESIGNATOR |
BOM_STRUCTURES_B |
| WIP_REPETITIVE_SCHEDULES.COMMON_BOM_SEQUENCE_ID | BOM_STRUCTURES_B |
BOM_STRUCTURES_B stores information about manufacturing and
engineering bills of material. Each row in this table represents a
unique manufacturing or engineering bill and is identified by
BILL_SEQUENCE_ID.
.
Oracle Bills of Material stores planning bills, model/option
structures and standard bills in this table. The item's BOM_ITEM_TYPE
attribute dictates the type of bill of material defined in this table.
There is no identifier in this table that differentiates planning,
model, option class, standard bills or product families.
.
If a bill shares its structure with another bill in the same or a
different organization, COMMON_BILL_SEQUENCE_ID refers to that
common bill. This is a mandatory column that equals BILL_SEQUENCE_ID
if there is no common bill reference.
.
If an engineering change order creates a new bill of material for an
item, PENDING_FROM_ECN stores the ECO number that originates this new
bill.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_STRUCTURES_B_U1 | UNIQUE | APPS_TS_TX_IDX |
OBJ_NAME
PK1_VALUE PK2_VALUE ALTERNATE_BOM_DESIGNATOR |
| BOM_STRUCTURES_B_U2 | UNIQUE | APPS_TS_TX_IDX | BILL_SEQUENCE_ID |
| BOM_STRUCTURES_B_N1 | NONUNIQUE | APPS_TS_TX_IDX | COMMON_BILL_SEQUENCE_ID |
| BOM_STRUCTURES_B_N2 | NONUNIQUE | APPS_TS_TX_IDX |
ASSEMBLY_ITEM_ID
ORGANIZATION_ID ALTERNATE_BOM_DESIGNATOR |
| BOM_STRUCTURES_B_N3 | NONUNIQUE | APPS_TS_TX_IDX | SOURCE_BILL_SEQUENCE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of manufactured assembly | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | Assembly item identifier of common bill | ||
| SPECIFIC_ASSEMBLY_COMMENT | VARCHAR2 | (240) | Specific bill of material comment | |
| PENDING_FROM_ECN | VARCHAR2 | (10) | Change notice that created this bill of material | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ASSEMBLY_TYPE | NUMBER | Y | Assembly type: 1=Manufacturing bill 2=Engineering bill | |
| COMMON_BILL_SEQUENCE_ID | NUMBER | Y | Identifier of common bill | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| COMMON_ORGANIZATION_ID | NUMBER | Organization identifier of common bill | ||
| NEXT_EXPLODE_DATE | DATE | Next date when pre-explosion will be refreshed | ||
| PROJECT_ID | NUMBER | Project Identifier for Project Manufacturing | ||
| TASK_ID | NUMBER | Task identifier for Project Manufacturing | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from. | |
| STRUCTURE_TYPE_ID | NUMBER | Structure Type Id | ||
| IMPLEMENTATION_DATE | DATE | Implementation date | ||
| OBJ_NAME | VARCHAR2 | (30) | Object Name | |
| PK1_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK2_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK3_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK4_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK5_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| EFFECTIVITY_CONTROL | NUMBER | Effectivity control | ||
| IS_PREFERRED | VARCHAR2 | (1) | Is preferred | |
| SOURCE_BILL_SEQUENCE_ID | NUMBER | Source Bill Sequence Id |
BOM.BOM_STRUCTURES_B does not reference any database object
BOM.BOM_STRUCTURES_B is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EXTENSION_ID | NUMBER | Y | ||
| BILL_SEQUENCE_ID | NUMBER | Y | ||
| BILL_REVISION_ID | NUMBER | |||
| STRUCTURE_TYPE_ID | NUMBER | Y | ||
| CHANGE_LINE_ID | NUMBER | |||
| ACD_TYPE | NUMBER | |||
| ATTR_GROUP_ID | NUMBER | Y | ||
| CREATED_BY | NUMBER | (15) | Y | |
| CREATION_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | (15) | Y | |
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATE_LOGIN | NUMBER | (15) | ||
| C_EXT_ATTR1 | VARCHAR2 | (150) | ||
| C_EXT_ATTR2 | VARCHAR2 | (150) | ||
| C_EXT_ATTR3 | VARCHAR2 | (150) | ||
| C_EXT_ATTR4 | VARCHAR2 | (150) | ||
| C_EXT_ATTR5 | VARCHAR2 | (150) | ||
| C_EXT_ATTR6 | VARCHAR2 | (150) | ||
| C_EXT_ATTR7 | VARCHAR2 | (150) | ||
| C_EXT_ATTR8 | VARCHAR2 | (150) | ||
| C_EXT_ATTR9 | VARCHAR2 | (150) | ||
| C_EXT_ATTR10 | VARCHAR2 | (150) | ||
| C_EXT_ATTR11 | VARCHAR2 | (150) | ||
| C_EXT_ATTR12 | VARCHAR2 | (150) | ||
| C_EXT_ATTR13 | VARCHAR2 | (150) | ||
| C_EXT_ATTR14 | VARCHAR2 | (150) | ||
| C_EXT_ATTR15 | VARCHAR2 | (150) | ||
| C_EXT_ATTR16 | VARCHAR2 | (150) | ||
| C_EXT_ATTR17 | VARCHAR2 | (150) | ||
| C_EXT_ATTR18 | VARCHAR2 | (150) | ||
| C_EXT_ATTR19 | VARCHAR2 | (150) | ||
| C_EXT_ATTR20 | VARCHAR2 | (150) | ||
| N_EXT_ATTR1 | NUMBER | |||
| N_EXT_ATTR2 | NUMBER | |||
| N_EXT_ATTR3 | NUMBER | |||
| N_EXT_ATTR4 | NUMBER | |||
| N_EXT_ATTR5 | NUMBER | |||
| N_EXT_ATTR6 | NUMBER | |||
| N_EXT_ATTR7 | NUMBER | |||
| N_EXT_ATTR8 | NUMBER | |||
| N_EXT_ATTR9 | NUMBER | |||
| N_EXT_ATTR10 | NUMBER | |||
| D_EXT_ATTR1 | DATE | |||
| D_EXT_ATTR2 | DATE | |||
| D_EXT_ATTR3 | DATE | |||
| D_EXT_ATTR4 | DATE | |||
| D_EXT_ATTR5 | DATE | |||
| C_EXT_ATTR21 | VARCHAR2 | (150) | ||
| C_EXT_ATTR22 | VARCHAR2 | (150) | ||
| C_EXT_ATTR23 | VARCHAR2 | (150) | ||
| C_EXT_ATTR24 | VARCHAR2 | (150) | ||
| C_EXT_ATTR25 | VARCHAR2 | (150) | ||
| C_EXT_ATTR26 | VARCHAR2 | (150) | ||
| C_EXT_ATTR27 | VARCHAR2 | (150) | ||
| C_EXT_ATTR28 | VARCHAR2 | (150) | ||
| C_EXT_ATTR29 | VARCHAR2 | (150) | ||
| C_EXT_ATTR30 | VARCHAR2 | (150) | ||
| C_EXT_ATTR31 | VARCHAR2 | (150) | ||
| C_EXT_ATTR32 | VARCHAR2 | (150) | ||
| C_EXT_ATTR33 | VARCHAR2 | (150) | ||
| C_EXT_ATTR34 | VARCHAR2 | (150) | ||
| C_EXT_ATTR35 | VARCHAR2 | (150) | ||
| C_EXT_ATTR36 | VARCHAR2 | (150) | ||
| C_EXT_ATTR37 | VARCHAR2 | (150) | ||
| C_EXT_ATTR38 | VARCHAR2 | (150) | ||
| C_EXT_ATTR39 | VARCHAR2 | (150) | ||
| C_EXT_ATTR40 | VARCHAR2 | (150) | ||
| N_EXT_ATTR11 | NUMBER | |||
| N_EXT_ATTR12 | NUMBER | |||
| N_EXT_ATTR13 | NUMBER | |||
| N_EXT_ATTR14 | NUMBER | |||
| N_EXT_ATTR15 | NUMBER | |||
| N_EXT_ATTR16 | NUMBER | |||
| N_EXT_ATTR17 | NUMBER | |||
| N_EXT_ATTR18 | NUMBER | |||
| N_EXT_ATTR19 | NUMBER | |||
| N_EXT_ATTR20 | NUMBER | |||
| UOM_EXT_ATTR1 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR2 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR3 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR4 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR5 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR6 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR7 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR8 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR9 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR10 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR11 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR12 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR13 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR14 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR15 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR16 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR17 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR18 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR19 | VARCHAR2 | (3) | ||
| UOM_EXT_ATTR20 | VARCHAR2 | (3) | ||
| D_EXT_ATTR6 | DATE | |||
| D_EXT_ATTR7 | DATE | |||
| D_EXT_ATTR8 | DATE | |||
| D_EXT_ATTR9 | DATE | |||
| D_EXT_ATTR10 | DATE |
BOM.BOM_STRUCTURES_EXT_B does not reference any database object
BOM.BOM_STRUCTURES_EXT_B is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EXTENSION_ID | NUMBER | Y | ||
| BILL_SEQUENCE_ID | NUMBER | Y | ||
| BILL_REVISION_ID | NUMBER | |||
| STRUCTURE_TYPE_ID | NUMBER | Y | ||
| CHANGE_LINE_ID | NUMBER | |||
| ACD_TYPE | NUMBER | |||
| ATTR_GROUP_ID | NUMBER | Y | ||
| SOURCE_LANG | VARCHAR2 | (30) | Y | |
| LANGUAGE | VARCHAR2 | (30) | Y | |
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y | ||
| LAST_UPDATE_LOGIN | NUMBER | Y | ||
| CREATED_BY | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| TL_EXT_ATTR1 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR2 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR3 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR4 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR5 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR6 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR7 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR8 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR9 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR10 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR11 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR12 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR13 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR14 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR15 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR16 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR17 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR18 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR19 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR20 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR21 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR22 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR23 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR24 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR25 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR26 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR27 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR28 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR29 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR30 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR31 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR32 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR33 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR34 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR35 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR36 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR37 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR38 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR39 | VARCHAR2 | (1000) | ||
| TL_EXT_ATTR40 | VARCHAR2 | (1000) |
BOM.BOM_STRUCTURES_EXT_TL does not reference any database object
BOM.BOM_STRUCTURES_EXT_TL is referenced by following:
| Description: | Structure Type master table |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_STRUCTURE_TYPES_B.ITEM_CATALOG_GROUP_ID | MTL_ITEM_CATALOG_GROUPS_B |
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_COMPONENT_TYPES.STRUCTURE_TYPE_ID | BOM_STRUCTURE_TYPES_B |
| BOM_STRUCTURE_TYPES_TL.STRUCTURE_TYPE_ID | BOM_STRUCTURE_TYPES_B |
Structure Type master table
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_STRUCTURE_TYPES_B_U1 | UNIQUE | APPS_TS_TX_IDX | STRUCTURE_TYPE_NAME |
| BOM_STRUCTURE_TYPES_B_U2 | UNIQUE | APPS_TS_TX_IDX | STRUCTURE_TYPE_ID |
| BOM_STRUCTURE_TYPES_B_N1 | NONUNIQUE | APPS_TS_TX_IDX | PARENT_STRUCTURE_TYPE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| STRUCTURE_TYPE_ID | NUMBER | Y | Structure Type unique identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Y | Standard Who Column | |
| STRUCTURE_TYPE_NAME | VARCHAR2 | (30) | Y | Structure Type Name |
| ITEM_CATALOG_GROUP_ID | NUMBER | Catalog group Identifier | ||
| EFFECTIVE_DATE | DATE | Y | Effective date for a structure type | |
| STRUCTURE_CREATION_ALLOWED | VARCHAR2 | (1) | Y | Flag to decide Structure Creation |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DISABLE_DATE | DATE | Disbale date for a structure type | ||
| PARENT_STRUCTURE_TYPE_ID | NUMBER | Parent structure type identifier | ||
| ENABLE_ATTACHMENTS_FLAG | VARCHAR2 | (1) | Flag to decide enabling attachments | |
| ENABLE_UNIMPLEMENTED_BOMS | VARCHAR2 | (1) | This flag Identifies if a BOM with this structure type can be an unimplemented BOM | |
| ALLOW_SUBTYPES | VARCHAR2 | (1) | Determines whether subtypes allowed or not for this StructureType. |
BOM.BOM_STRUCTURE_TYPES_B does not reference any database object
BOM.BOM_STRUCTURE_TYPES_B is referenced by following:
| Description: | Translation table for Structure types |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_STRUCTURE_TYPES_TL.STRUCTURE_TYPE_ID | BOM_STRUCTURE_TYPES_B |
Table to store translated information for structure types.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_STRUCTURE_TYPES_TL_U1 | UNIQUE | APPS_TS_TX_IDX |
LANGUAGE
STRUCTURE_TYPE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| STRUCTURE_TYPE_ID | NUMBER | Y | Strucutre Type unique identifier | |
| LANGUAGE | VARCHAR2 | (4) | Y | The language code of the language which the translatable fields are translated to |
| SOURCE_LANG | VARCHAR2 | (4) | Y | Language code of the language which the values of the translatable columns were originally entered |
| DISPLAY_NAME | VARCHAR2 | (80) | Y | Display Name for structure type |
| DESCRIPTION | VARCHAR2 | (240) | Structure type Description | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Y | Standard Who Column |
BOM.BOM_STRUCTURE_TYPES_TL does not reference any database object
BOM.BOM_STRUCTURE_TYPES_TL is referenced by following:
| Description: | Substitute components |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_SUBSTITUTE_COMPONENTS.COMPONENT_SEQUENCE_ID | BOM_COMPONENTS_B |
BOM_SUBSTITUTE_COMPONENTS stores information about the substitute
components associated with a bill of material component. It is a
child table of BOM_INVENTORY_COMPONENTS, and stores substitute
components of current components as well as components that are
pending on ECOs. Substitute components appear on MRP reports.
.
.
The column SUBSTITUTE_ITEM_QUANTITY stores the quantity of substitute
items needed to replace the full component quantity as represented in
the COMPONENT_QUANTITY column of the BOM_INVENTORY_COMPONENTS table.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_SUBSTITUTE_COMPONENTS_U1 | UNIQUE | APPS_TS_TX_IDX |
COMPONENT_SEQUENCE_ID
SUBSTITUTE_COMPONENT_ID ACD_TYPE |
| BOM_SUBSTITUTE_COMPONENTS_N1 | NONUNIQUE | APPS_TS_TX_IDX | SUBSTITUTE_COMPONENT_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SUBSTITUTE_COMPONENT_ID | NUMBER | Y | Substitute component inventory item | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| SUBSTITUTE_ITEM_QUANTITY | NUMBER | Y | Substitute component quantity | |
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| ACD_TYPE | NUMBER | Type to indicate add or delete on an engineering change order | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from | |
| ENFORCE_INT_REQUIREMENTS | NUMBER | Enforce Integer Requirements | ||
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common Component Sequence Id |
BOM.BOM_SUBSTITUTE_COMPONENTS does not reference any database object
BOM.BOM_SUBSTITUTE_COMPONENTS is referenced by following:
| Description: | Substitute components |
|---|
Used by Delete Group program to archive substitute components deleted
as a result of a cascade delete on components.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SUBSTITUTE_COMPONENT_ID | NUMBER | Y | Substitute component inventory item | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| SUBSTITUTE_ITEM_QUANTITY | NUMBER | Y | Substitute component quantity | |
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| ACD_TYPE | NUMBER | Type to indicate add or delete on an engineering change order | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from | |
| ENFORCE_INT_REQUIREMENTS | NUMBER | Enforce Integer Requirements | ||
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common component sequence id |
BOM.BOM_SUBSTITUTE_COMPS_ARCHIVE does not reference any database object
BOM.BOM_SUBSTITUTE_COMPS_ARCHIVE is referenced by following:
| Description: | Substitute component interface data |
|---|
BOM_SUB_COMPS_INTERFACE temporarily stores information about the
substitute components associated with a bill of material component.
This table is shared by the Bills of Material and Engineering Change
Order open interfaces.
This table contains user friendly columns which allow you to easily
enter your data as well as their corresponding foreign keys. The
open interfaces will derive column values you do not enter, after
performing the proper validation. For example, you enter the
ORGANIZATION_CODE, and the open interfaces will fill in the
corresponding ORGANIZATION_ID for you.
.
Also, you can enter ASSEMBLY_ITEM_ID, ORGANIZATION_ID and
ALTERNATE_BOM_DESIGNATOR instead of BILL_SEQUENCE_ID. The open
interfaces will fill in the corresponding BILL_SEQUENCE_ID.
.
In addition, you can enter BILL_SEQUENCE_ID, COMPONENT_ITEM_ID,
OPERATION_SEQ_NUM, and EFFECTIVITY_DATE instead of
COMPONENT_SEQUENCE_ID. The open interfaces will fill in the
corresponding COMPONENT_SEQUENCE_ID.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_SUB_COMPS_INTERFACE_N1 | NONUNIQUE | APPS_TS_INTERFACE |
COMPONENT_SEQUENCE_ID
SUBSTITUTE_COMPONENT_ID |
| BOM_SUB_COMPS_INTERFACE_N2 | NONUNIQUE | APPS_TS_INTERFACE |
ORGANIZATION_ID
ASSEMBLY_ITEM_ID ALTERNATE_BOM_DESIGNATOR |
| BOM_SUB_COMPS_INTERFACE_N3 | NONUNIQUE | APPS_TS_INTERFACE | TRANSACTION_ID |
| BOM_SUB_COMPS_INTERFACE_N4 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_NUMBER
ORGANIZATION_ID BOM_SUB_COMPS_IFCE_KEY |
| BOM_SUB_COMPS_INTERFACE_N5 | NONUNIQUE | APPS_TS_INTERFACE |
ASSEMBLY_ITEM_NUMBER
ORGANIZATION_CODE ALTERNATE_BOM_DESIGNATOR |
| BOM_SUB_COMPS_INTERFACE_N6 | NONUNIQUE | APPS_TS_INTERFACE | ENG_CHANGES_IFCE_KEY |
| BOM_SUB_COMPS_INTERFACE_N7 | NONUNIQUE | APPS_TS_INTERFACE |
PROCESS_FLAG
ORGANIZATION_ID TRANSACTION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SUBSTITUTE_COMPONENT_ID | NUMBER | Inventory item identifier of substitute component | ||
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| SUBSTITUTE_ITEM_QUANTITY | NUMBER | Substitute component quantity | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| ACD_TYPE | NUMBER | Add or delete code from an engineering change order | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BILL_SEQUENCE_ID | NUMBER | Bill of material unique identifier | ||
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of the bill | ||
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| TRANSACTION_ID | NUMBER | Row identifier | ||
| PROCESS_FLAG | NUMBER | Row status | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Abbreviation of organization name | |
| SUBSTITUTE_COMP_NUMBER | VARCHAR2 | (240) | Concatenated item segments of the substitute component | |
| COMPONENT_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated item segments of the component | |
| ASSEMBLY_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated item segments of the bill | |
| NEW_SUB_COMP_ID | NUMBER | Updated value for the SUBSTITUTE_COMPONENT_ID | ||
| NEW_SUB_COMP_NUMBER | VARCHAR2 | (240) | Updated value for the SUBSTITUTE_COMP_NUMBER | |
| INTERFACE_ENTITY_TYPE | VARCHAR2 | (4) | Record used for Bill or ECO Open Interface: BILL, ECO | |
| TRANSACTION_TYPE | VARCHAR2 | (10) | Type of action: CREATE, UPDATE or DELETE | |
| BOM_SUB_COMPS_IFCE_KEY | VARCHAR2 | (30) | User defined identifier to link rows pertaining to the same business object | |
| BOM_INVENTORY_COMPS_IFCE_KEY | VARCHAR2 | (30) | User defined identifier to link rows pertaining to the same business object | |
| ENG_REVISED_ITEMS_IFCE_KEY | VARCHAR2 | (30) | User defined identifier to link rows pertaining to the same business object | |
| ENG_CHANGES_IFCE_KEY | VARCHAR2 | (30) | User defined identifier to link rows pertaining to the same business object | |
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (240) | From End Item Unit Number | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (240) | Original system that data for the current record has come from | |
| ENFORCE_INT_REQUIREMENTS | VARCHAR2 | (80) | Enforce Integer Requirements | |
| NEW_REVISED_ITEM_REVISION | VARCHAR2 | (3) | New Revised Item Revision is one of the unique keys to identify a revised item of a change | |
| RETURN_STATUS | VARCHAR2 | (1) | Return Status | |
| BATCH_ID | NUMBER | Batch Identifier for Data Load | ||
| COMP_SOURCE_SYSTEM_REFERENCE | VARCHAR2 | (240) | Component Source System Item Name | |
| PARENT_SOURCE_SYSTEM_REFERENCE | VARCHAR2 | (240) | Parent Source System Item Name | |
| SUBCOM_SOURCE_SYSTEM_REFERENCE | VARCHAR2 | (240) | Subcomponent Source System Item Name | |
| CHANGE_ID | NUMBER | Change Identifier | ||
| SUB_COMP_INVERSE_QUANTITY | NUMBER | Inverse Quantity of substitute component in bill of material | ||
| CHANGE_TRANSACTION_TYPE | VARCHAR2 | (10) | Change Management Transaction Type for Change Orders | |
| INTERFACE_TABLE_UNIQUE_ID | NUMBER | Interface Table Unique Id for Merge | ||
| ASSEMBLY_ITEM_REVISION_CODE | VARCHAR2 | (240) | Assembly item revision code | |
| ASSEMBLY_ITEM_REVISION_ID | NUMBER | Assembly item revision id |
BOM.BOM_SUB_COMPS_INTERFACE does not reference any database object
BOM.BOM_SUB_COMPS_INTERFACE is referenced by following:
| Description: | Substitue Resources |
|---|
Used for storing substitute resources for an operation resource
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_SUB_OPERATION_RESOURCES_U1 | UNIQUE | APPS_TS_TX_IDX |
OPERATION_SEQUENCE_ID
RESOURCE_ID SUBSTITUTE_GROUP_NUM REPLACEMENT_GROUP_NUM BASIS_TYPE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_SEQUENCE_ID | NUMBER | Y | Operation unique identifier | |
| SUBSTITUTE_GROUP_NUM | NUMBER | Y | Substitue group number | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| SCHEDULE_SEQ_NUM | NUMBER | Scheduling sequence number | ||
| REPLACEMENT_GROUP_NUM | NUMBER | Y | Substitute group number | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| STANDARD_RATE_FLAG | NUMBER | Y | Use standard rate for shopfloor transactions | |
| ASSIGNED_UNITS | NUMBER | Y | Resource units assigned | |
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Resource usage rate | |
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Y | Resource usage rate inverse | |
| BASIS_TYPE | NUMBER | Y | Basis type identifier | |
| SCHEDULE_FLAG | NUMBER | Y | Schedule the resource | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| RESOURCE_OFFSET_PERCENT | NUMBER | Resource offset percent from the start of the routing | ||
| AUTOCHARGE_TYPE | NUMBER | Y | Autocharge type for shopfloor moves | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRINCIPLE_FLAG | NUMBER | Principal Flag | ||
| SETUP_ID | NUMBER | Setup Type unique identifier | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Change Notice | |
| ACD_TYPE | NUMBER | Acd Type | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original System Reference |
BOM.BOM_SUB_OPERATION_RESOURCES does not reference any database object
BOM.BOM_SUB_OPERATION_RESOURCES is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
BOM_SUB_OPERATION_RESOURCE_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
BOM_SUB_OPERATION_RESOURCES prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| USAGE_RATE_OR_AMOUNT | NUMBER | Resource Rate Amount | ||
| OPERATION_SEQUENCE_ID | NUMBER | Operation Sequence Identifier | ||
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Inverse Resource Rate Amount | ||
| RESOURCE_SEQ_NUM | NUMBER | Resource Sequence Number | ||
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.BOM_SUB_OPERATION_RESOURCE_EFC does not reference any database object
BOM.BOM_SUB_OPERATION_RESOURCE_EFC is referenced by following:
| Description: | Substitute resources interface data for routing operations |
|---|
BOM_SUB_OP_RESOURCES_INTERFACE temporarily stores information about
substitute resources that may be required to complete operations on routings. This
table contains user friendly columns which allow you to easily enter
your data as well as their corresponding foreign keys. Oracle Bills of
Material will derive column values you do not enter, after performing
the proper validation. For example, you enter the ORGANIZATION_CODE
and Oracle Bills of Material will fill in the corresponding
ORGANIZATION_ID for you.
.
Also, you can enter ROUTING_SEQUENCE_ID, OPERATION_SEQ_NUM, and
EFFECTIVITY_DATE instead of OPERATION_SEQUENCE_ID. Oracle Bills of
Material will fill in the corresponding OPERATION_SEQUENCE_ID.
.
In addition, you can enter ASSEMBLY_ITEM_ID, ORGANIZATION_ID and
ALTERNATE_ROUTING_DESIGNATOR instead of ROUTING_SEQUENCE_ID. Oracle
Bills of Material will fill in the corresponding ROUTING_SEQUENCE_ID.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_SUB_OP_RESOURCES_INTFC_N2 | NONUNIQUE | APPS_TS_INTERFACE | BATCH_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_SEQUENCE_ID | NUMBER | Routing operation unique identifier | ||
| SUBSTITUTE_GROUP_NUM | NUMBER | Resource sequence number | ||
| SCHEDULE_SEQ_NUM | NUMBER | Schedule sequence number | ||
| REPLACEMENT_GROUP_NUM | NUMBER | Replacement group number | ||
| RESOURCE_ID | NUMBER | Resource unique identifier | ||
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| OPERATION_TYPE | NUMBER | Process, Line Operation or Event | ||
| STANDARD_RATE_FLAG | NUMBER | Use standard rate for shop floor transactions | ||
| ASSIGNED_UNITS | NUMBER | Resource units assigned | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Resource usage rate | ||
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Resource usage rate inverse | ||
| BASIS_TYPE | NUMBER | Basis type identifier | ||
| SCHEDULE_FLAG | NUMBER | Schedule the resource | ||
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| RESOURCE_OFFSET_PERCENT | NUMBER | Resource offset percent from the start of the routing | ||
| AUTOCHARGE_TYPE | NUMBER | Autocharge type for shop floor moves | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of manufactured assembly | ||
| ALTERNATE_ROUTING_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| ROUTING_SEQUENCE_ID | NUMBER | Routing unique identifier | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Abbreviation of organization name | |
| ASSEMBLY_ITEM_NUMBER | VARCHAR2 | (240) | Concatenated item segments | |
| SUB_RESOURCE_CODE | VARCHAR2 | (10) | Resource name | |
| ACTIVITY | VARCHAR2 | (10) | Activity name | |
| TRANSACTION_ID | NUMBER | Row identifier | ||
| PROCESS_FLAG | NUMBER | Row status | ||
| TRANSACTION_TYPE | VARCHAR2 | (10) | Create, Update, or Delete | |
| NEW_SUB_RESOURCE_CODE | VARCHAR2 | (10) | New resource sequence number. This column was added to facilitate updates because it's part of the primary key. | |
| PRINCIPLE_FLAG | NUMBER | Principal flag | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system reference | |
| SETUP_CODE | VARCHAR2 | (30) | Setup type code | |
| ECO_NAME | VARCHAR2 | (10) | Used by Engineering Change Order Process | |
| NEW_REVISED_ITEM_REVISION | VARCHAR2 | (3) | New revised item revision | |
| NEW_ROUTING_REVISION | VARCHAR2 | (3) | New routing revision | |
| ACD_TYPE | NUMBER | ACD type | ||
| NEW_REPLACEMENT_GROUP_NUM | NUMBER | The new value the user would want to update the replacement group number with | ||
| ENG_CHANGES_IFCE_KEY | NUMBER | Engineering changes IFCE key | ||
| BATCH_ID | NUMBER | BATCH_ID | ||
| NEW_BASIS_TYPE | NUMBER | New basis type |
BOM.BOM_SUB_OP_RESOURCES_INTERFACE does not reference any database object
BOM.BOM_SUB_OP_RESOURCES_INTERFACE is referenced by following:
| Description: | On/Off workday patterns for calendars and shifts |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_WORKDAY_PATTERNS.CALENDAR_CODE | BOM_CALENDARS |
|
BOM_WORKDAY_PATTERNS.CALENDAR_CODE
BOM_WORKDAY_PATTERNS.SHIFT_NUM |
BOM_CALENDAR_SHIFTS |
BOM_WORKDAY_PATTERNS stores the days on/days off patterns for your
calendar and your shifts. You can define multiple days on/days off to
form a repetitive pattern. The calendar compile program (BMCPCL) will
create a workday calendar based on this repeating pattern along with
the exceptions that you may define. SEQ_NUM is the order of your days
on/days off to create the repeating workday pattern. For example, if
you define a calendar as follows:
.
=
SeqNum DaysOn DaysOff
1 5 2
2 4 3 =
.
Your repeating workday pattern will be over 14 days (5+2+4+3) as
follows: = 5 days on 2 days off 4 days on 3 days off =
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| BOM_WORKDAY_PATTERNS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
CALENDAR_CODE
SHIFT_NUM |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| SHIFT_NUM | NUMBER | Shift number | ||
| SEQ_NUM | NUMBER | Y | Sequence number | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| DAYS_ON | NUMBER | Y | Number of days on | |
| DAYS_OFF | NUMBER | Y | Number of days off | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.BOM_WORKDAY_PATTERNS does not reference any database object
BOM.BOM_WORKDAY_PATTERNS is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_ID | NUMBER | |||
| ITEM_DESC | VARCHAR2 | (240) | ||
| PERIOD_ID | NUMBER | |||
| PERIOD_NAME | VARCHAR2 | (240) | ||
| WAC | NUMBER | |||
| LIFO_COST | NUMBER | |||
| MARKET_VALUE | NUMBER | |||
| JUSTIFICATION | VARCHAR2 | (240) | ||
| LAYER_QUANTITY | NUMBER | |||
| TOTAL_LAYER_QUANTITY | NUMBER | |||
| INVENTORY_VALUE | NUMBER | |||
| TOTAL_INVENTORY_VALUE | NUMBER | |||
| ITEM_CODE | VARCHAR2 | (30) | ||
| UOM_CODE | VARCHAR2 | (30) |
BOM.CSTGILEV_TEMP does not reference any database object
BOM.CSTGILEV_TEMP is referenced by following:
| Description: | CST_ACCOUNTING_LIBRARIES stores information about the library that should be called during the periodic distribution process for GAAP Accounting. |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_ACCT_LIB_PACKAGES.ACCOUNTING_LIB_ID | CST_ACCOUNTING_LIBRARIES |
| CST_LE_COST_TYPES.ACCOUNTING_LIBRARY_ID | CST_ACCOUNTING_LIBRARIES |
CST_ACCOUNTING_LIBRARIES stores information about the library that should be called during the periodic distribution process for GAAP Accounting.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ACCOUNTING_LIBRARIES_U1 | UNIQUE | APPS_TS_SEED | ACCOUNTING_LIB_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCOUNTING_LIB_ID | NUMBER | Y | Unique ID | |
| LIB_NAME | VARCHAR2 | (15) | Y | Name of the Accounting Library |
| DESCRIPTION | VARCHAR2 | (240) | Description of the Accounting Library | |
| COST_METHOD_ID | NUMBER | (15) | Cost Method identifier for which the library can be used | |
| LIB_PKG_NAME | VARCHAR2 | (100) | Y | The PL/SQL package name for the library |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Y | Standard Who column |
| PROGRAM_UPDATE_DATE | DATE | Extended Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Extended Who column | |
| PROGRAM_ID | NUMBER | (15) | Extended Who column | |
| REQUEST_ID | NUMBER | (15) | Extended Who column |
BOM.CST_ACCOUNTING_LIBRARIES does not reference any database object
BOM.CST_ACCOUNTING_LIBRARIES is referenced by following:
| Description: | CST_ACCOUNTING_PACKAGES stores information about PL/SQL packages that are called during the periodic distribution process. |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_ACCT_LIB_PACKAGES.ACCOUNTING_PACKAGE_ID | CST_ACCOUNTING_PACKAGES |
CST_ACCOUNTING_PACKAGES stores information about PL/SQL packages that are called during periodic distribution process
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ACCOUNTING_PACKAGES_U1 | UNIQUE | APPS_TS_SEED | ACCOUNTING_PACKAGE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCOUNTING_PACKAGE_ID | NUMBER | (15) | Y | Unique ID |
| DESCRIPTION | VARCHAR2 | (240) | Description of the accounting package | |
| PACKAGE_NAME | VARCHAR2 | (50) | Y | Name of the PL/SQL package |
| COST_METHOD_ID | NUMBER | (15) | Cost Method identifier for which the package can be used | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Y | Standard Who column |
| PROGRAM_UPDATE_DATE | DATE | Extended Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Extended Who column | |
| PROGRAM_ID | NUMBER | (15) | Extended Who column | |
| REQUEST_ID | NUMBER | (15) | Extended Who column |
BOM.CST_ACCOUNTING_PACKAGES does not reference any database object
BOM.CST_ACCOUNTING_PACKAGES is referenced by following:
| Description: | Stores the accrual account information for accrual reconciliation modules |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_ACCRUAL_ACCOUNTS.ACCRUAL_ACCOUNT_ID | GL_CODE_COMBINATIONS |
| CST_ACCRUAL_ACCOUNTS.OPERATING_UNIT_ID | HR_ALL_ORGANIZATION_UNITS |
The table will be used to keep track of the user's accrual accounts. The accounts in this table will be used throughout accrual reconciliation modules.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ACCRUAL_ACCOUNTS_U1 | UNIQUE | APPS_TS_TX_IDX |
ACCRUAL_ACCOUNT_ID
OPERATING_UNIT_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCRUAL_ACCOUNT_ID | NUMBER | Y | Accrual Account Identifier | |
| OPERATING_UNIT_ID | NUMBER | Y | Operating Unit Identifier | |
| LAST_UPDATE_DATE | DATE | Standard Who Column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Standard Who Column | ||
| CREATED_BY | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who Column |
BOM.CST_ACCRUAL_ACCOUNTS does not reference any database object
BOM.CST_ACCRUAL_ACCOUNTS is referenced by following:
| Description: | CST_ACCT_LIB_PACKAGES stores associations between the library for GAAP accounting and any PL/SQL package that should be called for a transaction event during periodic distribution process. |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_ACCT_LIB_PACKAGES.ACCOUNTING_LIB_ID | CST_ACCOUNTING_LIBRARIES |
| CST_ACCT_LIB_PACKAGES.ACCOUNTING_PACKAGE_ID | CST_ACCOUNTING_PACKAGES |
CST_ACCT_LIB_PACKAGES stores associations between the library for GAAP accounting and any PL/SQL package that should be called for a transaction event during periodic distribution process.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ACCT_LIB_PACKAGES_N1 | NONUNIQUE | APPS_TS_SEED |
ACCOUNTING_LIB_ID
EVENT_TYPE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCOUNTING_LIB_ID | NUMBER | Y | ID from CST_ACCOUNTING_LIBRARIES | |
| ACCOUNTING_PACKAGE_ID | NUMBER | (15) | Y | ID from CST_ACCOUNTING_PACKAGES |
| EVENT_TYPE_ID | VARCHAR2 | (30) | Event ID from CST_EVENT_TYPES | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Y | Standard Who column |
| PROGRAM_UPDATE_DATE | DATE | Extended Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Extended Who column | |
| PROGRAM_ID | NUMBER | (15) | Extended Who column | |
| REQUEST_ID | NUMBER | (15) | Extended Who column |
BOM.CST_ACCT_LIB_PACKAGES does not reference any database object
BOM.CST_ACCT_LIB_PACKAGES is referenced by following:
| Description: | Activity definition associated with activity costing |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_OPERATION_RESOURCES.ACTIVITY_ID | CST_ACTIVITIES |
| BOM_RESOURCES.DEFAULT_ACTIVITY_ID | CST_ACTIVITIES |
| BOM_STD_OP_RESOURCES.ACTIVITY_ID | CST_ACTIVITIES |
| BOM_STD_SUB_OP_RESOURCES.ACTIVITY_ID | CST_ACTIVITIES |
| CST_ACTIVITY_COSTS.ACTIVITY_ID | CST_ACTIVITIES |
| CST_AE_LINES.ACTIVITY_ID | CST_ACTIVITIES |
| CST_DEPARTMENT_OVERHEADS.ACTIVITY_ID | CST_ACTIVITIES |
| CST_ITEM_COST_DETAILS.ACTIVITY_ID | CST_ACTIVITIES |
| CST_ITEM_CST_DTLS_INTERFACE.ACTIVITY_ID | CST_ACTIVITIES |
| MTL_TRANSACTION_ACCOUNTS.ACTIVITY_ID | CST_ACTIVITIES |
| WIP_COST_TXN_INTERFACE.ACTIVITY_ID | CST_ACTIVITIES |
| WIP_OPERATION_RESOURCES.ACTIVITY_ID | CST_ACTIVITIES |
| WIP_SUB_OPERATION_RESOURCES.ACTIVITY_ID | CST_ACTIVITIES |
| WIP_TRANSACTIONS.ACTIVITY_ID | CST_ACTIVITIES |
| WIP_TRANSACTION_ACCOUNTS.ACTIVITY_ID | CST_ACTIVITIES |
CST_ACTIVITIES stores activities information. An activity can be
specific to one organization or shared among all organizations. For
shared activities, the ORGANIZATION_ID column holds the organization
identifier. For non-shared activities, the ORGANIZATION_ID is NULL.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ACTIVITIES_U1 | UNIQUE | APPS_TS_TX_IDX | ACTIVITY_ID |
| CST_ACTIVITIES_U2 | UNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
ACTIVITY |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACTIVITY_ID | NUMBER | Y | Activity identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ACTIVITY | VARCHAR2 | (10) | Y | Activity name |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| DESCRIPTION | VARCHAR2 | (240) | Y | Description |
| DEFAULT_BASIS_TYPE | NUMBER | Default basis for the activity | ||
| DISABLE_DATE | DATE | Date activity becomes inactive | ||
| OUTPUT_UOM | VARCHAR2 | (50) | Activity measurement unit | |
| VALUE_ADDED_ACTIVITY_FLAG | VARCHAR2 | (150) | Flag indicating whether the activity adds value | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_ACTIVITIES does not reference any database object
BOM.CST_ACTIVITIES is referenced by following:
| Description: | Cost associated with the activity |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_ACTIVITY_COSTS.COST_TYPE_ID | CST_COST_TYPES |
| CST_ACTIVITY_COSTS.ACTIVITY_ID | CST_ACTIVITIES |
CST_ACTIVITY_COSTS stores activity costs for a particular cost
type. It is the child table of CST_ACTIVITIES.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ACTIVITY_COSTS_U1 | UNIQUE | APPS_TS_TX_IDX |
ACTIVITY_ID
ORGANIZATION_ID COST_TYPE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACTIVITY_ID | NUMBER | Y | Activity identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| TOTAL_COST | NUMBER | Total expected cost for the activity | ||
| TOTAL_ACTIVITY_UNITS | NUMBER | The total expected number of activity occurrences | ||
| UNIT_COST | NUMBER | Total unit cost | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_ACTIVITY_COSTS does not reference any database object
BOM.CST_ACTIVITY_COSTS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_ACTIVITY_COSTS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_ACTIVITY_COSTS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| UNIT_COST | NUMBER | Unit Cost | ||
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| ACTIVITY_ID | NUMBER | Y | Activity Identifier | |
| TOTAL_COST | NUMBER | Total Cost | ||
| COST_TYPE_ID | NUMBER | Y | Cost Type Identifier | |
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.CST_ACTIVITY_COSTS_EFC does not reference any database object
BOM.CST_ACTIVITY_COSTS_EFC is referenced by following:
| Description: | Header Information for Periodic Accounting Distributions |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_AE_HEADERS.SET_OF_BOOKS_ID | GL_SETS_OF_BOOKS_11I |
| CST_AE_HEADERS.ACCOUNTING_EVENT_ID | RCV_TRANSACTIONS |
| CST_AE_HEADERS.COST_GROUP_ID | CST_COST_GROUPS |
| CST_AE_HEADERS.COST_TYPE_ID | CST_COST_TYPES |
| CST_AE_HEADERS.PERIOD_ID | CST_PAC_PERIODS |
| CST_AE_HEADERS.ORGANIZATION_ID | MTL_PARAMETERS |
| CST_AE_HEADERS.LEGAL_ENTITY_ID | HR_ALL_ORGANIZATION_UNITS |
| CST_AE_HEADERS.ACCOUNTING_EVENT_ID | MTL_MATERIAL_TRANSACTIONS |
| CST_AE_HEADERS.ACCOUNTING_EVENT_ID | WIP_TRANSACTIONS |
| Foreign Key Column | Foreign Table |
|---|---|
| CST_AE_LINES.AE_HEADER_ID | CST_AE_HEADERS |
This table stores the header information for Periodic Accounting Distributions
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_AE_HEADERS_U1 | UNIQUE | APPS_TS_TX_IDX | AE_HEADER_ID |
| CST_AE_HEADERS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
GL_TRANSFER_RUN_ID
ACCOUNTING_DATE LEGAL_ENTITY_ID COST_TYPE_ID COST_GROUP_ID PERIOD_ID |
| CST_AE_HEADERS_N2 | NONUNIQUE | APPS_TS_TX_IDX | ACCOUNTING_EVENT_ID |
| CST_AE_HEADERS_N3 | NONUNIQUE | APPS_TS_TX_IDX |
PERIOD_ID
COST_GROUP_ID COST_TYPE_ID ACCT_EVENT_SOURCE_TABLE ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| AE_HEADER_ID | NUMBER | (15) | Y | Unique Identifier |
| ACCOUNTING_EVENT_ID | NUMBER | Y | Accounting Event Identifier | |
| SET_OF_BOOKS_ID | NUMBER | (15) | Y | Set of Books Identifier |
| LEGAL_ENTITY_ID | NUMBER | (15) | Y | Legal Entity Identifier |
| COST_GROUP_ID | NUMBER | Y | Cost Group Identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost Type Identifier | |
| AE_CATEGORY | VARCHAR2 | (30) | Accounting Event Category | |
| PERIOD_ID | NUMBER | Y | Period Identifier | |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Name of accounting period |
| ACCOUNTING_DATE | DATE | Y | Accounting Event Date | |
| GL_TRANSFER_FLAG | VARCHAR2 | (1) | Y | General Ledger Transfer Flag |
| GL_TRANSFER_RUN_ID | NUMBER | General Ledger Transfer Run Identifier | ||
| DESCRIPTION | VARCHAR2 | (240) | Description of Accounting Header | |
| GL_TRANSFER_ERROR_CODE | VARCHAR2 | (240) | General Ledger Transfer Error Code | |
| ACCT_EVENT_SOURCE_TABLE | VARCHAR2 | (10) | Accounting Event Source Table | |
| ORGANIZATION_ID | NUMBER | Y | Accounting Event Organization Identifier | |
| ACCOUNTING_ERROR_CODE | VARCHAR2 | (30) | Accounting Error Code | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Y | Standard Who column |
| PROGRAM_UPDATE_DATE | DATE | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Standard Who column | |
| PROGRAM_ID | NUMBER | (15) | Standard Who column | |
| REQUEST_ID | NUMBER | (15) | Standard Who column | |
| CROSS_CURRENCY_FLAG | VARCHAR2 | (1) | Cross Currency Flag | |
| GL_REVERSAL_FLAG | VARCHAR2 | (1) | Indicates whether accounting entries need to be reversed |
BOM.CST_AE_HEADERS does not reference any database object
BOM.CST_AE_HEADERS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_AE_HEADERS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_AE_HEADERS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier | ||
| AE_HEADER_ID | NUMBER | AE Header Identifier |
BOM.CST_AE_HEADERS_EFC does not reference any database object
BOM.CST_AE_HEADERS_EFC is referenced by following:
| Description: | Stores debits and credits for Periodic Distributions |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_AE_LINES.AE_HEADER_ID | CST_AE_HEADERS |
| CST_AE_LINES.CODE_COMBINATION_ID | GL_CODE_COMBINATIONS |
| CST_AE_LINES.CURRENCY_CODE | FND_CURRENCIES |
| CST_AE_LINES.RESOURCE_ID | BOM_RESOURCES |
| CST_AE_LINES.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| CST_AE_LINES.ACTIVITY_ID | CST_ACTIVITIES |
| CST_AE_LINES.REPETITIVE_SCHEDULE_ID | WIP_REPETITIVE_SCHEDULES |
This table stores the accounting distribution entries (debits and credits) for periodic distributions.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_AE_LINES_U1 | UNIQUE | APPS_TS_TX_IDX | AE_LINE_ID |
| CST_AE_LINES_N1 | NONUNIQUE | APPS_TS_TX_IDX | AE_HEADER_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| AE_LINE_ID | NUMBER | (15) | Y | Unique Identifier |
| AE_HEADER_ID | NUMBER | (15) | Y | Accounting Header Identifier |
| AE_LINE_NUMBER | NUMBER | Y | Accounting Line Number | |
| AE_LINE_TYPE_CODE | VARCHAR2 | (30) | Accounting Line Type Code | |
| CODE_COMBINATION_ID | NUMBER | (15) | Account Identifier | |
| CURRENCY_CODE | VARCHAR2 | (15) | Y | Currency Code |
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | Currency Conversion Type | |
| CURRENCY_CONVERSION_DATE | DATE | Currency Conversion Date | ||
| CURRENCY_CONVERSION_RATE | NUMBER | Currency Conversion Exchange Rate | ||
| ENTERED_DR | NUMBER | Accounting Debit Entry | ||
| ENTERED_CR | NUMBER | Accounting Credit Entry | ||
| ACCOUNTED_DR | NUMBER | Accounting Debit entry in functional currency | ||
| ACCOUNTED_CR | NUMBER | Accounting Credit entry in functional currency | ||
| SOURCE_TABLE | VARCHAR2 | (30) | Accounting Entry source table | |
| SOURCE_ID | NUMBER | (15) | Accounting Entry source Identifier | |
| RATE_OR_AMOUNT | NUMBER | Per Unit Rate | ||
| BASIS_TYPE | NUMBER | Basis Type for WIP | ||
| RESOURCE_ID | NUMBER | Resource Identifier for WIP | ||
| COST_ELEMENT_ID | NUMBER | Cost Element Identifier | ||
| ACTIVITY_ID | NUMBER | Activity Identifier for WIP | ||
| REPETITIVE_SCHEDULE_ID | NUMBER | Repetitive Schedule Identifier for WIP | ||
| OVERHEAD_BASIS_FACTOR | NUMBER | Overhead Basis Factor for WIP | ||
| BASIS_RESOURCE_ID | NUMBER | (15) | Basis Resource Identifier for WIP | |
| GL_SL_LINK_ID | NUMBER | (15) | Link to General Ledger | |
| DESCRIPTION | VARCHAR2 | (240) | Description of Accounting entry line | |
| ACCOUNTING_ERROR_CODE | VARCHAR2 | (30) | Accounting Error Code | |
| STAT_AMOUNT | NUMBER | Stat Amount | ||
| USSGL_TRANSACTION_CODE | VARCHAR2 | (30) | USSGL Transaction Code | |
| SUBLEDGER_DOC_SEQUENCE_ID | NUMBER | (15) | Subledger Document Sequence Identifier | |
| SUBLEDGER_DOC_SEQUENCE_VALUE | NUMBER | Subledger Document Sequence Value | ||
| GL_TRANSFER_ERROR_CODE | VARCHAR2 | (240) | General Ledger Transfer Error Code | |
| REFERENCE1 | VARCHAR2 | (240) | Reference column | |
| REFERENCE2 | VARCHAR2 | (240) | Reference column | |
| REFERENCE3 | VARCHAR2 | (240) | Reference column | |
| REFERENCE4 | VARCHAR2 | (240) | Reference column | |
| REFERENCE5 | VARCHAR2 | (240) | Reference column | |
| REFERENCE6 | VARCHAR2 | (240) | Reference column | |
| REFERENCE7 | VARCHAR2 | (240) | Reference column | |
| REFERENCE8 | VARCHAR2 | (240) | Reference column | |
| REFERENCE9 | VARCHAR2 | (240) | Reference column | |
| REFERENCE10 | VARCHAR2 | (240) | Reference column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Y | Standard Who column |
| PROGRAM_UPDATE_DATE | DATE | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Standard Who column | |
| PROGRAM_ID | NUMBER | (15) | Standard Who column | |
| REQUEST_ID | NUMBER | (15) | Standard Who column | |
| PO_DISTRIBUTION_ID | NUMBER | Purchase Order Distribution Identifier for Receiving Transactions | ||
| WIP_ENTITY_ID | NUMBER | WIP Entity Identifier |
BOM.CST_AE_LINES does not reference any database object
BOM.CST_AE_LINES is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_AE_LINES_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_AE_LINES prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| AE_LINE_ID | NUMBER | Y | Line Identifier | |
| ACCOUNTED_CR | NUMBER | Accounted Credit | ||
| ACCOUNTED_DR | NUMBER | Accounted Debit | ||
| CURRENCY_CONVERSION_RATE | NUMBER | Currency Conversion Rate | ||
| OVERHEAD_BASIS_FACTOR | NUMBER | Overhead Basis Factor | ||
| STAT_AMOUNT | NUMBER | Stat_amount | ||
| RATE_OR_AMOUNT | NUMBER | Rate or Amount | ||
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.CST_AE_LINES_EFC does not reference any database object
BOM.CST_AE_LINES_EFC is referenced by following:
| Description: | Table to Store the Deatils of Purchasing and Payables Transactions |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_AP_PO_RECONCILIATION.PO_DISTRIBUTION_ID | PO_DISTRIBUTIONS_ALL |
| CST_AP_PO_RECONCILIATION.RCV_TRANSACTION_ID | RCV_TRANSACTIONS |
| CST_AP_PO_RECONCILIATION.ACCRUAL_ACCOUNT_ID | GL_CODE_COMBINATIONS |
| CST_AP_PO_RECONCILIATION.OPERATING_UNIT_ID | HR_ALL_ORGANIZATION_UNITS |
Table is used to Stored the Details of the Purchasing and Payables Transactions in the Accrual Recocniliation Process.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_AP_PO_RECONCILIATION_N1 | NONUNIQUE | APPS_TS_TX_IDX |
PO_DISTRIBUTION_ID
ACCRUAL_ACCOUNT_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_DATE | DATE | Y | Accounting Line Number | |
| AMOUNT | NUMBER | Y | Transaction Amount | |
| ENTERED_AMOUNT | NUMBER | Entered Transaction Amount | ||
| QUANTITY | NUMBER | Transaction Quantity | ||
| CURRENCY_CODE | VARCHAR2 | (15) | Currency Code | |
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | Currency Conversion Type | |
| CURRENCY_CONVERSION_RATE | NUMBER | Currency Conversion Rate | ||
| CURRENCY_CONVERSION_DATE | DATE | Currency Conversion Date | ||
| PO_DISTRIBUTION_ID | NUMBER | Y | PO Distribution Identifier | |
| RCV_TRANSACTION_ID | NUMBER | Receiving Transaction Identifier | ||
| INVOICE_DISTRIBUTION_ID | NUMBER | Invoice Distribution Identifier | ||
| ACCRUAL_ACCOUNT_ID | NUMBER | Y | Accrual Account Identifier | |
| TRANSACTION_TYPE_CODE | VARCHAR2 | (25) | Transaction Type Identifier | |
| INVENTORY_ORGANIZATION_ID | NUMBER | Organization Identifier | ||
| WRITE_OFF_ID | NUMBER | Write-Off Identifier | ||
| OPERATING_UNIT_ID | NUMBER | Y | Operating Unit Identifier | |
| BUILD_ID | NUMBER | Build Identifier | ||
| AE_HEADER_ID | NUMBER | Accounting Header Identifier | ||
| LAST_UPDATE_DATE | DATE | Standard Who Column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Standard Who Column | ||
| CREATED_BY | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who Column | ||
| AE_LINE_NUM | NUMBER | Accounting Line Number |
BOM.CST_AP_PO_RECONCILIATION does not reference any database object
BOM.CST_AP_PO_RECONCILIATION is referenced by following:
| Description: | Stores the parameters for each Invoice Variance Transfer Program run |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_AP_VARIANCE_HEADERS.BATCH_ID | CST_AP_VARIANCE_BATCHES |
| CST_AP_VARIANCE_LINES.BATCH_ID | CST_AP_VARIANCE_BATCHES |
Stores the parameters for each Invoice Variance Transfer Program run. A unique batch id identifies the record created during each run.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_AP_VARIANCE_BATCHES_U1 | UNIQUE | APPS_TS_TX_IDX | BATCH_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| BATCH_ID | NUMBER | Y | Batch identifier | |
| ORGANIZATION_ID | NUMBER | Y | Inventory organization identifier | |
| ITEM_OPTION | NUMBER | Item option specified at time of program submission | ||
| INVOICE_PROJECT_OPTION | NUMBER | Invoice option specified at time of program submission. | ||
| ADJUSTMENT_ACCOUNT | NUMBER | Adjustment account specified at time of program submission | ||
| CUTOFF_DATE | DATE | Invoice cut off date | ||
| TRANSACTION_PROCESS_MODE | NUMBER | Transaction process mode to control whether the update transactions are created in a state ready to import | ||
| SPECIFIC_ITEM_ID | NUMBER | Specific Item identifier, applicable only if specific item option was chosen | ||
| SPECIFIC_PROJECT_ID | NUMBER | Specific project identifier, applicable only if project invoice option was chosen | ||
| CATEGORY_ID | NUMBER | Category identifier, applicable if category item option was chosen | ||
| CATEGORY_SET_ID | NUMBER | Category set identifier | ||
| CREATION_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| REQUEST_ID | NUMBER | Extended Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Extended Who column | ||
| PROGRAM_ID | NUMBER | Extended Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Extended Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Extended Who column | ||
| DESCRIPTION | VARCHAR2 | (240) | Description as entered by the user at time of program submission | |
| WIP_ENTITY_ID | NUMBER | WIP entity identifier | ||
| ITEM_TYPE | NUMBER | Item type |
BOM.CST_AP_VARIANCE_BATCHES does not reference any database object
BOM.CST_AP_VARIANCE_BATCHES is referenced by following:
| Description: | Stores the variance information for a purchase order distribution for each batch run |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_AP_VARIANCE_HEADERS.BATCH_ID | CST_AP_VARIANCE_BATCHES |
| Foreign Key Column | Foreign Table |
|---|---|
| CST_AP_VARIANCE_LINES.VARIANCE_HEADER_ID | CST_AP_VARIANCE_HEADERS |
Stores the variance information for a purchase order distribution for each batch run
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_AP_VARIANCE_HEADERS_U1 | UNIQUE | APPS_TS_TX_IDX | VARIANCE_HEADER_ID |
| CST_AP_VARIANCE_HEADERS_U2 | UNIQUE | APPS_TS_TX_IDX |
BATCH_ID
PO_DISTRIBUTION_ID COST_GROUP_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| VARIANCE_HEADER_ID | NUMBER | Y | Variance header identifier | |
| PO_DISTRIBUTION_ID | NUMBER | Purchase order distribution identifier for which invoice variance is computed | ||
| ORGANIZATION_ID | NUMBER | Inventory organization identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier | ||
| COST_GROUP_ID | NUMBER | Cost group identifier, applicable only if invoice option is chosen at time of program run | ||
| VAR_AMOUNT | NUMBER | Invoice variance amount | ||
| TRANSACTION_DATE | DATE | System derived date for average cost update transaction | ||
| BATCH_ID | NUMBER | Y | Batch identifier that created this header record | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| REQUEST_ID | NUMBER | Extended Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Extended Who column | ||
| PROGRAM_ID | NUMBER | Extended Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Extended Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Extended Who column |
BOM.CST_AP_VARIANCE_HEADERS does not reference any database object
BOM.CST_AP_VARIANCE_HEADERS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_AP_VARIANCE_HEADERS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_AP_VARIANCE_HEADERS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| VAR_AMOUNT | NUMBER | Invoice variance amount | ||
| VARIANCE_HEADER_ID | NUMBER | Y | Variance header identifier | |
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.CST_AP_VARIANCE_HEADERS_EFC does not reference any database object
BOM.CST_AP_VARIANCE_HEADERS_EFC is referenced by following:
| Description: | Stores the variance information detail for a purchase order distribution and each batch run |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_AP_VARIANCE_LINES.VARIANCE_HEADER_ID | CST_AP_VARIANCE_HEADERS |
| CST_AP_VARIANCE_LINES.BATCH_ID | CST_AP_VARIANCE_BATCHES |
| CST_AP_VARIANCE_LINES.PO_DISTRIBUTION_ID | PO_DISTRIBUTIONS_ALL |
Stores the variance information detail for a purchase order distribution and each batch run
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_AP_VARIANCE_LINES_U1 | UNIQUE | APPS_TS_TX_IDX |
VARIANCE_HEADER_ID
VARIANCE_LINE_ID |
| CST_AP_VARIANCE_LINES_N1 | NONUNIQUE | APPS_TS_TX_IDX | BATCH_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| VARIANCE_HEADER_ID | NUMBER | Y | Variance header identifier | |
| VARIANCE_LINE_ID | NUMBER | Y | Variance line identifier | |
| BATCH_ID | NUMBER | Y | Batch identifier that created this record | |
| INVOICE_DISTRIBUTION_ID | NUMBER | Y | Invoice distribution ID as stored in AP tables | |
| INVOICE_ID | NUMBER | Invoice ID as stored in AP tables | ||
| DISTRIBUTION_LINE_NUMBER | NUMBER | Invoice distribution line number | ||
| PO_DISTRIBUTION_ID | NUMBER | Y | Purchase order distribution to which this invoice is matched | |
| INVOICE_PRICE_VARIANCE | NUMBER | Invoice price variance amount | ||
| BASE_INVOICE_PRICE_VARIANCE | NUMBER | Invoice price variance amount in base currency | ||
| VAR_AMOUNT | NUMBER | Invoice variance amount to be transferred to Inventory | ||
| PROJECT_ID | NUMBER | Project as indicated on the invoice | ||
| ORGANIZATION_ID | NUMBER | Y | Inventory Organization to which the PO distribution will deliver | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item as indicated on the purchase order line | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| REQUEST_ID | NUMBER | Extended Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Extended Who column | ||
| PROGRAM_ID | NUMBER | Extended Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Extended Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| COST_GROUP_ID | NUMBER | Cost Group Identifier |
BOM.CST_AP_VARIANCE_LINES does not reference any database object
BOM.CST_AP_VARIANCE_LINES is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_AP_VARIANCE_LINES_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_AP_VARIANCE_LINES prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| BASE_INVOICE_PRICE_VARIANCE | NUMBER | Base Invoice Price Variance | ||
| VAR_AMOUNT | NUMBER | Variance Amount | ||
| VARIANCE_LINE_ID | NUMBER | Y | Variance Line Identifier | |
| VARIANCE_HEADER_ID | NUMBER | Y | Variance Header Identifier | |
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.CST_AP_VARIANCE_LINES_EFC does not reference any database object
BOM.CST_AP_VARIANCE_LINES_EFC is referenced by following:
| Description: | Stores margin analysis load run parameters |
|---|
CST_MARGIN_BUILD stores the build information that is required to run
Margin Analysis Reports. Submitting a Margin Analysis Load Run
request populates this table. Submitting a Purge Margin Analysis Load
Run request removes records from it.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_BIS_MARGIN_BUILD_N1 | NONUNIQUE | APPS_TS_TX_IDX | BUILD_ID |
| CST_BIS_MARGIN_BUILD_N2 | NONUNIQUE | APPS_TS_TX_IDX |
FROM_DATE
TO_DATE |
| CST_BIS_MARGIN_BUILD_N3 | NONUNIQUE | APPS_TS_TX_IDX | LEGAL_ENTITY_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY_NAME | VARCHAR2 | (240) | Legal Entity name | |
| BUILD_ID | NUMBER | Y | Build identifier | |
| BUILD_NAME | VARCHAR2 | (60) | Y | Build name |
| LEGAL_ENTITY_ID | NUMBER | Legal Entity identifier | ||
| BUILD_DESCRIPTION | VARCHAR2 | (255) | Description of the build | |
| FROM_DATE | DATE | Build date from value | ||
| TO_DATE | DATE | Build date to value | ||
| ORG_ID | NUMBER | Operating unit | ||
| HEADER_ID | NUMBER | Header identifier for the sales order | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Cost type identifier | ||
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_BIS_MARGIN_BUILD does not reference any database object
BOM.CST_BIS_MARGIN_BUILD is referenced by following:
| Description: | Margin analysis summary table for reporting purposes |
|---|
CST_BIS_MARGIN_SUMMARY temporarily stores the detailed information that is
used to build Margin Analysis Reports. Like CST_MARGIN_BUILD, Margin
Analysis Load Run and Purge Margin Analysis Load Run requests populate
and remove records from this table.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_BIS_MARGIN_SUMMARY_N1 | NONUNIQUE | APPS_TS_SUMMARY |
HEADER_ID
LINE_ID GL_DATE CUSTOMER_ID PRIMARY_SALESREP_ID SALES_CHANNEL_CODE INVENTORY_ITEM_ID LEGAL_ENTITY_ID ORG_ID |
| CST_BIS_MARGIN_SUMMARY_N2 | NONUNIQUE | APPS_TS_SUMMARY | GL_DATE |
| CST_BIS_MARGIN_SUMMARY_N3 | NONUNIQUE | APPS_TS_SUMMARY |
SALES_CHANNEL_CODE
CUSTOMER_ID PARENT_INVENTORY_ITEM_ID PARENT_ORGANIZATION_ID ORG_ID SHIP_TO_SITE_USE_ID INVOICE_TO_SITE_USE_ID GL_DATE PERIOD_NAME_MONTH LEGAL_ENTITY_ID HEADER_ID |
| CST_BIS_MARGIN_SUMMARY_N4 | NONUNIQUE | APPS_TS_SUMMARY |
BUILD_ID
SOURCE ORG_ID RMA_HEADER_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY_ID | NUMBER | Legal Entity Identifier | ||
| BUILD_ID | NUMBER | Y | Build identifier | |
| SOURCE | VARCHAR2 | (15) | Y | Identifies source of the record |
| ROW_TYPE | NUMBER | Y | Identifies the type of a sales order line | |
| ORIGIN | NUMBER | Y | Identifies the origin of the record | |
| INVOICE_SOURCE | VARCHAR2 | (30) | Source of the invoice | |
| PARENT_ROWID | ROWID | (10) | Identifier of SO_ORDER_LINES | |
| ORDER_NUMBER | NUMBER | Order number of the sales order | ||
| ORG_ID | NUMBER | Operating unit | ||
| HEADER_ID | NUMBER | Order header identifier | ||
| ORDER_TYPE_ID | NUMBER | Order type identifier | ||
| CUSTOMER_ID | NUMBER | Customer identifier | ||
| SOLD_TO_CUSTOMER_NAME | VARCHAR2 | (50) | Customer name based on customer identifier | |
| PRIMARY_SALESREP_ID | NUMBER | Primary sales representative identifier | ||
| SALES_CHANNEL_CODE | VARCHAR2 | (30) | Sales channel code identifier | |
| PARENT_INVENTORY_ITEM_ID | NUMBER | Parent inventory item identifier in case of a non-standard item | ||
| PARENT_ORGANIZATION_ID | NUMBER | Organization identifier for the parent item | ||
| PARENT_LINE_ID | NUMBER | Line identifier for the parent line | ||
| PARENT_LINE_NUMBER | NUMBER | Line number for the parent line | ||
| PARENT_ITEM_TYPE_CODE | VARCHAR2 | (30) | Type identifier of the parent item, i.e. Standard, Model, Class, etc. | |
| PARENT_ATO_FLAG | VARCHAR2 | (1) | Flag indicating if the order line is for ATO | |
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier for the child line | ||
| ORGANIZATION_ID | NUMBER | Organization identifier for the child line | ||
| LINE_ID | NUMBER | Line identifier for the child line | ||
| LINE_TYPE_CODE | VARCHAR2 | (30) | Line type code for the child line | |
| LINE_NUMBER | NUMBER | Line number for the child line | ||
| SHIP_TO_SITE_USE_ID | NUMBER | Ship to site identifier | ||
| SHIP_TO_CUSTOMER_NAME | VARCHAR2 | (50) | Customer name based on SHIP_TO_SITE_USE_ID | |
| INVOICE_TO_SITE_USE_ID | NUMBER | Site identifier for the invoiced site information | ||
| BILL_TO_CUSTOMER_NAME | VARCHAR2 | (50) | Customer name based on the INVOICE_TO_SITE_USE_ID | |
| CUSTOMER_TRX_ID | NUMBER | Identifier for RA_CUSTOMER_TRX | ||
| CUSTOMER_TRX_LINE_ID | NUMBER | Identifier for RA_CUSTOMER_TRX_LINES | ||
| ORIGINAL_GL_DATE | DATE | Original General ledger Date | ||
| GL_DATE | DATE | General ledger date | ||
| INVOICE_LINE_QUANTITY | NUMBER | Quantity invoiced for entire order line | ||
| INVOICE_QUANTITY | NUMBER | Quantity invoiced for invoice line | ||
| ORDER_LINE_QUANTITY | NUMBER | Order quantity for order line | ||
| SHIP_QUANTITY | NUMBER | Actual shipment quantity | ||
| INVOICED_AMOUNT | NUMBER | Invoiced amount | ||
| COGS_AMOUNT | NUMBER | Cost of goods sold amount | ||
| SALES_ACCOUNT | NUMBER | Sales account identifier | ||
| COGS_ACCOUNT | NUMBER | Cost of goods sold identifier | ||
| TERRITORY_ID | NUMBER | Territory identifier | ||
| CUSTOMER_CLASS_CODE | VARCHAR2 | (30) | Industry identifier | |
| MARGIN | NUMBER | Margin | ||
| MARGIN_PCT | NUMBER | Margin percentage | ||
| RETURN_REFERENCE_TYPE_CODE | VARCHAR2 | (30) | Return reference type identifier for the RMA lines | |
| RETURN_REFERENCE_ID | NUMBER | Return reference identifier for the RMA lines | ||
| LINK_TO_LINE_ID | NUMBER | Parent line identifier if RETURN_REFERENCE_TYPE_CODE is populated | ||
| RMA_HEADER_ID | NUMBER | Header identifier for the RMA lines | ||
| RMA_NUMBER | NUMBER | Order number for the RMA lines | ||
| RMA_INVENTORY_ITEM_ID | NUMBER | Inventory item identifier for the RMA lines | ||
| RMA_LINE_ID | NUMBER | Line identifier for the RMA lines | ||
| RMA_LINE_NUMBER | NUMBER | Line number for the RMA lines | ||
| RMA_ORGANIZATION_ID | NUMBER | Organization identifier for the RMA lines | ||
| RMA_LINE_TYPE_CODE | VARCHAR2 | (30) | Line type code for the RMA lines | |
| RMA_SHIP_TO_SITE_USE_ID | NUMBER | Site identifier for the shipped site for the RMA lines | ||
| RMA_INVOICE_INVENTORY_ITEM_ID | NUMBER | Invoiced inventory item identifier for the RMA lines | ||
| CR_TRX_ID | NUMBER | Credit memo identifier in RA_CUSTOMER_TRX | ||
| CR_TRX_LINE_ID | NUMBER | Credit memo Identifier in RA_CUSTOMER_TRX_LINES | ||
| PERIOD_NAME_YEAR | VARCHAR2 | (15) | Year name from General Ledger Periods | |
| PERIOD_NUM_YEAR | NUMBER | Number identifier of Year in General Ledger Period | ||
| PERIOD_NAME_QTR | VARCHAR2 | (15) | Quarter name from General Ledger Periods | |
| PERIOD_NUM_QTR | NUMBER | Number identifier of Quarter in General Ledger Period | ||
| PERIOD_SEQ_QTR | NUMBER | Sequence of General Ledger Period Quarter | ||
| PERIOD_NAME_MONTH | VARCHAR2 | (15) | Month name from General Ledger Periods | |
| PERIOD_NUM_MONTH | NUMBER | Number identifier of Month in General Ledger Period | ||
| PERIOD_SEQ_MONTH | NUMBER | Sequence of General Ledger Period Month | ||
| OE_ITEM_CATEGORY_ID | NUMBER | Item Category Identifier based on the default category set of the OE functional area | ||
| AREA_CODE | VARCHAR2 | (30) | Identifier of Area level of the BIS geography dimension | |
| COUNTRY_CODE | VARCHAR2 | (2) | Identifier of Country level of the BIS geography dimension | |
| REGION_CODE | VARCHAR2 | (30) | Identifier of Region level of the BIS geography dimension | |
| AREA_NAME | VARCHAR2 | (80) | Name of Area level of the BIS geography dimension | |
| COUNTRY_NAME | VARCHAR2 | (80) | Name of Country level of the BIS geography dimension | |
| REGION_NAME | VARCHAR2 | (80) | Name of Region level of the BIS geography dimension | |
| OPERATING_UNIT_NAME | VARCHAR2 | (240) | Name of Operating Unit | |
| MARGIN_PK | VARCHAR2 | (120) | Y | Margin Primary Key |
BOM.CST_BIS_MARGIN_SUMMARY does not reference any database object
BOM.CST_BIS_MARGIN_SUMMARY is referenced by following:
| Description: | Stores associations between categories, cost elements, and expenditure types |
|---|
CST_CAT_ELE_EXP_ASSOCS stores the associations between categories, maintenance cost elements, manufacturing cost elements, and expenditure types for a specific enable date range. This table is used for EAM functionality.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_CAT_ELE_EXP_ASSOCS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
CATEGORY_ID
START_DATE END_DATE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CATEGORY_ID | NUMBER | Y | Category ID | |
| MNT_COST_ELEMENT_ID | NUMBER | Y | Maintenance Cost Element ID | |
| MFG_COST_ELEMENT_ID | NUMBER | Y | Manufacturing Cost Element ID | |
| START_DATE | DATE | Y | Start Enable Date | |
| END_DATE | DATE | End Enable Date | ||
| EXPENDITURE_TYPE_ID | NUMBER | Direct Item Expenditure Type ID | ||
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Y | Standard Who column |
BOM.CST_CAT_ELE_EXP_ASSOCS does not reference any database object
BOM.CST_CAT_ELE_EXP_ASSOCS is referenced by following:
| Description: | Temporary list of cost groups for use in cost reporting |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_GROUP_ID | NUMBER | Cost group identifier from cst_cost_groups |
BOM.CST_CG_LIST_TEMP does not reference any database object
BOM.CST_CG_LIST_TEMP is referenced by following:
| Description: | Uniquely identifies WIP accounting class for a cost group in each organization |
|---|
CST_CG_WIP_ACCT_CLASSES stores information about WIP accounting
classes for cost groups. This information is entered using the WIP
Accounting Classes for Cost Groups window in Oracle Cost Management.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_CG_WIP_ACCT_CLASSES_U1 | UNIQUE | APPS_TS_TX_IDX |
COST_GROUP_ID
ORGANIZATION_ID CLASS_CODE |
| CST_CG_WIP_ACCT_CLASSES_N1 | NONUNIQUE | APPS_TS_TX_IDX |
CLASS_CODE
ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_GROUP_ID | NUMBER | Y | Cost group identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| CLASS_CODE | VARCHAR2 | (10) | Y | Class code |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| DISABLE_DATE | DATE | Inactive On/After | ||
| REQUEST_ID | NUMBER | Request identifier | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_CG_WIP_ACCT_CLASSES does not reference any database object
BOM.CST_CG_WIP_ACCT_CLASSES is referenced by following:
| Description: | This is the accounting events table for COGS Recognition events. |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_COGS_EVENTS.MMT_TRANSACTION_ID | MTL_MATERIAL_TRANSACTIONS |
| CST_COGS_EVENTS.COGS_OM_LINE_ID | OE_ORDER_LINES_ALL |
This is the accounting events table for all types of events impacting Cost of Goods Sold. That includes sales order issues, RMA receipts, COGS Recognition events, and COGS Adjustment events resulting from backdated COGS events. This table maintains the quantities, percentages, and percentage changes necessary to build the accounting distributions for an event. It also links all of the related COGS events together by order line ID, and builds the sequential relationships between these events using the prior event ID and prior COGS percentage. Thus it serves two important purposes: 1) Provides the information necessary to create accounting distributions around COGS events, and 2) Assists in the creation of additional COGS events by providing the latest recorded COGS percentage for a given order line. This second role is accomplished with the help of two additional tables - CST_REVENUE_COGS_MATCH_LINES and CST_REVENUE_RECOGNITION_LINES - during the Generate COGS Recognition Events concurrent request.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_COGS_EVENTS_U1 | UNIQUE | APPS_TS_TX_IDX | EVENT_ID |
| CST_COGS_EVENTS_U2 | UNIQUE | APPS_TS_TX_IDX | MMT_TRANSACTION_ID |
| CST_COGS_EVENTS_N1 | NONUNIQUE | APPS_TS_TX_IDX | COGS_OM_LINE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EVENT_ID | NUMBER | Y | Unique identifier for a COGS event row in this table. | |
| COGS_OM_LINE_ID | NUMBER | Y | Reference to the line ID of the original sales order issue to which this COGS event applies. In Order Management's table: oe_order_lines.line_id. | |
| EVENT_DATE | DATE | Y | Truncated date of the COGS event. For COGS recognition event types, it corresponds to the Oracle Receivables GL date of the revenue recognition event. | |
| MMT_TRANSACTION_ID | NUMBER | All of the types of events in this table except for RMA placeholders have a corresponding transaction in mtl_material_transactions. | ||
| COGS_PERCENTAGE | NUMBER | Y | The percentage of the total outstanding cost of an order line shipment that is recognized as Cost of Goods Sold. | |
| PRIOR_COGS_PERCENTAGE | NUMBER | The amount of COGS recognized by the previous COGS event in the sequence. It stores the same value as the cogs_percentage in the event pointed to by prior_event_id. | ||
| PRIOR_EVENT_ID | NUMBER | For a given COGS_OM_LINE_ID, all events impacting COGS all into a sequence that is built using this column. The original sales order itself will not have a prior_event_id as it is the starting point. | ||
| EVENT_TYPE | NUMBER | Y | Specifies the type of COGS event: (1) Sales Order Issue (2) RMA Receipt (3) COGS Recognition Event (4) COGS Rec. Percent Adjustment (5) COGS Rec. Qty. Adj. (6) RMA placeholder | |
| EVENT_OM_LINE_ID | NUMBER | Holds oe_order_lines_all.line_id of the OM event which was the source of this COGS event. It will only be populated for sales order issues and RMA receipts. | ||
| EVENT_QUANTITY | NUMBER | Y | Quantity affected by the COGS event | |
| COSTED | VARCHAR2 | (1) | Set to 'N' until the event is processed and accounting is created, at which point it is set ot NULL. | |
| PARENT_EVENT_ID | NUMBER | Y | All quantity adjustments (such as RMAs and COGS Rec. Qty. Adj. events) are constructed as child events of a single parent. These child events do store a prior_event_id as they are not directly in the chain of COGS events. To find the quantity for a given node on the event chain, total up all of the quantity for a given parent_event_id. Note for parent events: parent_event_id = event_id. | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Standard Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who Column | ||
| PROGRAM_ID | NUMBER | Standard Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who Column |
BOM.CST_COGS_EVENTS does not reference any database object
BOM.CST_COGS_EVENTS is referenced by following:
| Description: | Global Temporary table used for matching COGS to Revenue in the package CST_RevenueCogsMatch_PVT. This table specifically helps create bulk percentage adjustment events which may result from backdated COGS recognition events. |
|---|
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_CPAET_U1 | UNIQUE | FTR_EVENT_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ADJ_EVENT_ID | NUMBER | |||
| ADJ_MMT_TXN_ID | NUMBER | |||
| ADJ_COGS_OM_LINE_ID | NUMBER | |||
| ADJ_EVENT_DATE | DATE | |||
| ADJ_NEW_COGS_PERCENTAGE | NUMBER | |||
| ADJ_PRIOR_COGS_PERCENTAGE | NUMBER | |||
| ADJ_PRIOR_EVENT_ID | NUMBER | |||
| ADJ_EVENT_QUANTITY | NUMBER | |||
| FTR_EVENT_ID | NUMBER | |||
| INVENTORY_ITEM_ID | NUMBER | |||
| PRIMARY_UOM | VARCHAR2 | (3) | ||
| ORGANIZATION_ID | NUMBER | |||
| COST_GROUP_ID | NUMBER | |||
| COGS_ACCT_ID | NUMBER | |||
| OPM_ORG_FLAG | VARCHAR2 | (1) | ||
| ACCT_PERIOD_ID | NUMBER |
BOM.CST_COGS_PCT_ADJ_EVENTS_TEMP does not reference any database object
BOM.CST_COGS_PCT_ADJ_EVENTS_TEMP is referenced by following:
| Description: | Global Temporary table used for matching COGS to Revenue in the package CST_RevenueCogsMatch_PVT. This table specifically helps create bulk quantity adjustment events which may result from backdated RMA receipts. |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ADJ_EVENT_ID | NUMBER | |||
| ADJ_MMT_TXN_ID | NUMBER | |||
| ADJ_COGS_OM_LINE_ID | NUMBER | |||
| ADJ_RMA_OM_LINE_ID | NUMBER | |||
| ADJ_EVENT_DATE | DATE | |||
| ADJ_NEW_COGS_PERCENTAGE | NUMBER | |||
| ADJ_PRIOR_COGS_PERCENTAGE | NUMBER | |||
| ADJ_EVENT_QUANTITY | NUMBER | |||
| PARENT_EVENT_ID | NUMBER | |||
| INVENTORY_ITEM_ID | NUMBER | |||
| PRIMARY_UOM | VARCHAR2 | (3) | ||
| ORGANIZATION_ID | NUMBER | |||
| COST_GROUP_ID | NUMBER | |||
| COGS_ACCT_ID | NUMBER | |||
| OPM_ORG_FLAG | VARCHAR2 | (1) | ||
| ACCT_PERIOD_ID | NUMBER |
BOM.CST_COGS_QTY_ADJ_EVENTS_TEMP does not reference any database object
BOM.CST_COGS_QTY_ADJ_EVENTS_TEMP is referenced by following:
| Description: | Stores the assembly units completed at each operation step |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_COMP_SNAPSHOT.WIP_ENTITY_ID | WIP_ENTITIES |
| CST_COMP_SNAPSHOT.TRANSACTION_ID | MTL_MATERIAL_TRANSACTIONS |
CST_COMP_SNAPSHOT contains snapshot information from WIP_OPERATIONS.
When the user performs a WIP assembly completion, assembly return, or
scrap transaction, operation information such as assembly units
completed at each operation step and other details from WIP_OPERATIONS
are inserted into this table.
.
In an average costing organization, when the user completes assemblies
and chooses the "Use Actual Resources" system option, the information
in CST_COMP_SNAPSHOT is used by the Actual Cost Worker (CMCACW) to
calculate the cost of WIP assembly completion, assembly return, and
scrap transactions.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_COMP_SNAPSHOT_U1 | UNIQUE | APPS_TS_TX_IDX |
TRANSACTION_ID
WIP_ENTITY_ID OPERATION_SEQ_NUM |
| CST_COMP_SNAPSHOT_N1 | NONUNIQUE | APPS_TS_TX_IDX |
WIP_ENTITY_ID
OPERATION_SEQ_NUM |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | Y | Transaction identifier | |
| WIP_ENTITY_ID | NUMBER | Y | WIP entity identifier | |
| OPERATION_SEQ_NUM | NUMBER | Y | Operation sequence number | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| NEW_OPERATION_FLAG | NUMBER | Indicates that this operation was added after the job was released | ||
| PRIMARY_QUANTITY | NUMBER | Y | Quantity in primary UOM | |
| QUANTITY_COMPLETED | NUMBER | Y | Number of units completed by the operation | |
| PRIOR_COMPLETION_QUANTITY | NUMBER | Total number of units completed for the job prior to this transaction | ||
| PRIOR_SCRAP_QUANTITY | NUMBER | Total number of units scrapped for the job prior to this transaction | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_COMP_SNAPSHOT does not reference any database object
BOM.CST_COMP_SNAPSHOT is referenced by following:
| Description: | Stores the assembly units completed at each operation step to be interfaced through the transactions interface |
|---|
CST_COMP_SNAP_INTERFACE temporarily stores operation information such
as assembly units completed at each operation step and other details
before loading into Oracle Cost Management.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_COMP_SNAP_INTERFACE_U1 | UNIQUE | APPS_TS_INTERFACE |
TRANSACTION_INTERFACE_ID
WIP_ENTITY_ID OPERATION_SEQ_NUM |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_INTERFACE_ID | NUMBER | Y | Transaction identifier | |
| WIP_ENTITY_ID | NUMBER | Y | WIP entity identifier | |
| OPERATION_SEQ_NUM | NUMBER | Y | Operation sequence number | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| NEW_OPERATION_FLAG | NUMBER | Indicates that this operation was added after the job was released | ||
| PRIMARY_QUANTITY | NUMBER | Y | Quantity in primary UOM | |
| QUANTITY_COMPLETED | NUMBER | Y | Number of units completed by the operation | |
| PRIOR_COMPLETION_QUANTITY | NUMBER | Total number of units completed for the job prior to this transaction | ||
| PRIOR_SCRAP_QUANTITY | NUMBER | Total number of units scrapped for the job prior to this transaction | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_COMP_SNAP_INTERFACE does not reference any database object
BOM.CST_COMP_SNAP_INTERFACE is referenced by following:
| Description: | Stores the assembly units completed at each operation step to be interfaced through the transactions temporary table |
|---|
CST_COMP_SNAP_TEMP is a temporary table containing information from
CST_COMP_SNAPSHOT. This table is for internal use only.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_COMP_SNAP_TEMP_U1 | NONUNIQUE | APPS_TS_INTERFACE |
TRANSACTION_TEMP_ID
WIP_ENTITY_ID OPERATION_SEQ_NUM |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_TEMP_ID | NUMBER | Y | Temporary transaction identifier | |
| WIP_ENTITY_ID | NUMBER | Y | WIP entity identifier | |
| OPERATION_SEQ_NUM | NUMBER | Y | Operation sequence number | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| NEW_OPERATION_FLAG | NUMBER | Indicated that this operation was added after the job was released | ||
| PRIMARY_QUANTITY | NUMBER | Y | Primary quantity | |
| QUANTITY_COMPLETED | NUMBER | Y | Number of units completed by the operation | |
| PRIOR_COMPLETION_QUANTITY | NUMBER | Total number of units completed for the job prior to this transaction | ||
| PRIOR_SCRAP_QUANTITY | NUMBER | Total number of units scrapped for the job prior to this transaction | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_COMP_SNAP_TEMP does not reference any database object
BOM.CST_COMP_SNAP_TEMP is referenced by following:
| Description: | Cost elements definition |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| BOM_RESOURCES.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| CST_AE_LINES.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| CST_EAM_BALANCE_BY_ACCOUNTS.MFG_COST_ELEMENT_ID | CST_COST_ELEMENTS |
| CST_ELEMENTAL_COSTS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| CST_ITEM_COST_DETAILS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| CST_ITEM_CST_DTLS_INTERFACE.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| CST_LAYER_COST_DETAILS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| CST_PAC_ITEM_COST_DETAILS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| CST_STD_COST_ADJ_VALUES.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| MTL_ACTUAL_COST_SUBELEMENT.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| MTL_CST_ACTUAL_COST_DETAILS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| MTL_CST_TXN_COST_DETAILS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| MTL_PAC_ACTUAL_COST_DETAILS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| MTL_PAC_COST_SUBELEMENTS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| MTL_PAC_TXN_COST_DETAILS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| MTL_TRANSACTION_ACCOUNTS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| MTL_TXN_COST_DET_INTERFACE.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| WIP_PAC_ACTUAL_COST_DETAILS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| WIP_REQ_OPERATION_COST_DETAILS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| WIP_SCRAP_VALUES.COST_ELEMENT_ID | CST_COST_ELEMENTS |
CST_COST_ELEMENTS stores the five seeded cost elements: Material,
Material Overhead, Resource, Outside Processing, and Overhead.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_COST_ELEMENTS_U1 | UNIQUE | APPS_TS_SEED | COST_ELEMENT_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| COST_ELEMENT | VARCHAR2 | (50) | Y | Cost element name |
| DESCRIPTION | VARCHAR2 | (240) | Y | Description |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_COST_ELEMENTS does not reference any database object
BOM.CST_COST_ELEMENTS is referenced by following:
| Description: | Expenditure types for cost elements. |
|---|
CST_COST_ELEM_EXP_TYPES stores information about the expenditure types
that are associated with cost elements. This information is entered
using the Expenditure Types for Cost Elements window in Oracle Cost
Management.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_COST_ELEM_EXP_TYPES_U1 | UNIQUE | APPS_TS_SEED | COST_ELEMENT_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| EXPENDITURE_TYPE_IN | VARCHAR2 | (30) | Expenditure type for transfers into a project | |
| EXPENDITURE_TYPE_OUT | VARCHAR2 | (30) | Expenditure type for transfers out of a project | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_COST_ELEM_EXP_TYPES does not reference any database object
BOM.CST_COST_ELEM_EXP_TYPES is referenced by following:
| Description: | Stores cost group definitions |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_AE_HEADERS.COST_GROUP_ID | CST_COST_GROUPS |
| CST_COST_GROUP_ASSIGNMENTS.COST_GROUP_ID | CST_COST_GROUPS |
| CST_PAC_EXPLOSION_TEMP.COST_GROUP_ID | CST_COST_GROUPS |
| CST_PAC_ITEM_COSTS.COST_GROUP_ID | CST_COST_GROUPS |
| CST_PAC_LOW_LEVEL_CODES.COST_GROUP_ID | CST_COST_GROUPS |
| CST_PAC_PROCESS_PHASES.COST_GROUP_ID | CST_COST_GROUPS |
| CST_PAC_QUANTITY_LAYERS.COST_GROUP_ID | CST_COST_GROUPS |
| CST_RCV_ACQ_COSTS.COST_GROUP_ID | CST_COST_GROUPS |
| MTL_CYCLE_COUNT_ENTRIES.COST_GROUP_ID | CST_COST_GROUPS |
| MTL_FISCAL_CAT_ACCOUNTS.COST_GROUP_ID | CST_COST_GROUPS |
| MTL_MATERIAL_TRANSACTIONS.TRANSFER_COST_GROUP_ID | CST_COST_GROUPS |
| MTL_MATERIAL_TRANSACTIONS.COST_GROUP_ID | CST_COST_GROUPS |
| MTL_PAC_ACTUAL_COST_DETAILS.COST_GROUP_ID | CST_COST_GROUPS |
| MTL_PAC_COST_SUBELEMENTS.COST_GROUP_ID | CST_COST_GROUPS |
| MTL_PAC_TXN_COST_DETAILS.COST_GROUP_ID | CST_COST_GROUPS |
| MTL_PARAMETERS.DEFAULT_COST_GROUP_ID | CST_COST_GROUPS |
| MTL_PERIOD_CG_SUMMARY.COST_GROUP_ID | CST_COST_GROUPS |
| MTL_PHYSICAL_ADJUSTMENTS.COST_GROUP_ID | CST_COST_GROUPS |
| MTL_PHYSICAL_INVENTORY_TAGS.COST_GROUP_ID | CST_COST_GROUPS |
| MTL_SECONDARY_INVENTORIES.DEFAULT_COST_GROUP_ID | CST_COST_GROUPS |
| WIP_PAC_ACTUAL_COST_DETAILS.COST_GROUP_ID | CST_COST_GROUPS |
| WIP_PAC_PERIOD_BALANCES.COST_GROUP_ID | CST_COST_GROUPS |
Stores cost group definitions. Cost groups are used in average costing and project manufacturing. A cost group can be associated with a specific average costing organization or can be a multiple organization cost group. A cost group that is associated with a project that spans multiple inventory organizations must be a multiple organization cost group.
A multiple organization 'common' cost group is seeded in the table. Multiple projects can share a cost group. In addition, cost groups can also be used as organization cost groups for periodic costing. Identified by cost group type, the organization cost group is used for periodic costing to calculate costs for a collection of one or more inventory organizations within a legal entity.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_COST_GROUPS_U1 | UNIQUE | APPS_TS_TX_IDX | COST_GROUP_ID |
| CST_COST_GROUPS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
COST_GROUP
ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_GROUP_ID | NUMBER | Y | Cost Group Identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ORGANIZATION_ID | NUMBER | Organization Identifier | ||
| COST_GROUP | VARCHAR2 | (10) | Y | Cost group name |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DISABLE_DATE | DATE | Inactive On/After | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LEGAL_ENTITY | NUMBER | Legal Entity Identifier | ||
| COST_GROUP_TYPE | NUMBER | Cost group type based on the CST_COST_GROUP_TYPE lookup type |
BOM.CST_COST_GROUPS does not reference any database object
BOM.CST_COST_GROUPS is referenced by following:
| Description: | Accounts for a cost group for an average costing organization |
|---|
Stores all the pertinent accounts for a cost
group for an average costing organization.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_COST_GROUP_ACCOUNTS_U1 | UNIQUE | APPS_TS_TX_IDX |
COST_GROUP_ID
ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_GROUP_ID | NUMBER | Y | Cost group identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| MATERIAL_ACCOUNT | NUMBER | Inventory material account | ||
| MATERIAL_OVERHEAD_ACCOUNT | NUMBER | Inventory material overhead account | ||
| RESOURCE_ACCOUNT | NUMBER | Resource labor account | ||
| OVERHEAD_ACCOUNT | NUMBER | Inventory overhead account | ||
| OUTSIDE_PROCESSING_ACCOUNT | NUMBER | Outside processing account | ||
| AVERAGE_COST_VAR_ACCOUNT | NUMBER | Average cost variance account | ||
| ENCUMBRANCE_ACCOUNT | NUMBER | Encumbrance account | ||
| PAYBACK_MAT_VAR_ACCOUNT | NUMBER | Borrow payback variance account for material | ||
| PAYBACK_RES_VAR_ACCOUNT | NUMBER | Borrow payback variance account for resource | ||
| PAYBACK_OSP_VAR_ACCOUNT | NUMBER | Borrow payback variance account for outside processing | ||
| PAYBACK_MOH_VAR_ACCOUNT | NUMBER | Borrow payback variance account for material overhead | ||
| PAYBACK_OVH_VAR_ACCOUNT | NUMBER | Borrow payback variance account for overhead | ||
| EXPENSE_ACCOUNT | NUMBER | Expense Account | ||
| PURCHASE_PRICE_VAR_ACCOUNT | NUMBER | Purchase price variance is required for Standard costing organizations supporting project manufacturing |
BOM.CST_COST_GROUP_ACCOUNTS does not reference any database object
BOM.CST_COST_GROUP_ACCOUNTS is referenced by following:
| Description: | Stores the organization assignment |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_COST_GROUP_ASSIGNMENTS.COST_GROUP_ID | CST_COST_GROUPS |
| CST_COST_GROUP_ASSIGNMENTS.ORGANIZATION_ID | MTL_PARAMETERS |
The CST_COST_GROUP_ASSIGNMENTS table stores the association between one or more inventory organizations within a legal entity to an organization cost group. Periodic costs are calculated at the organization cost group level.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_COST_GROUP_ASSIGNMENTS_U1 | UNIQUE | APPS_TS_TX_IDX |
COST_GROUP_ID
ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_GROUP_ID | NUMBER | Y | Cost group identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier assigned to the cost group | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| REQUEST_ID | NUMBER | Extended Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Extended Who Column | ||
| PROGRAM_ID | NUMBER | Extended Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Extended Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column |
BOM.CST_COST_GROUP_ASSIGNMENTS does not reference any database object
BOM.CST_COST_GROUP_ASSIGNMENTS is referenced by following:
| Description: | Stores cost type definitions |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_REVENUE_COGS_MATCH_LINES.PAC_COST_TYPE_ID | CST_COST_TYPES |
| CST_ACTIVITY_COSTS.COST_TYPE_ID | CST_COST_TYPES |
| CST_AE_HEADERS.COST_TYPE_ID | CST_COST_TYPES |
| CST_COST_TYPE_HISTORY.COST_TYPE_ID | CST_COST_TYPES |
| CST_COST_UPDATES.COST_TYPE_ID | CST_COST_TYPES |
| CST_DEPARTMENT_OVERHEADS.COST_TYPE_ID | CST_COST_TYPES |
| CST_ITEM_COSTS.COST_TYPE_ID | CST_COST_TYPES |
| CST_ITEM_COSTS_INTERFACE.COST_TYPE_ID | CST_COST_TYPES |
| CST_ITEM_COST_DETAILS.COST_TYPE_ID | CST_COST_TYPES |
| CST_ITEM_CST_DTLS_INTERFACE.COST_TYPE_ID | CST_COST_TYPES |
| CST_LE_COST_TYPES.COST_TYPE_ID | CST_COST_TYPES |
| CST_LE_COST_TYPES.PAC_RATES_COST_TYPE_ID | CST_COST_TYPES |
| CST_MARGIN_BUILD.COST_TYPE_ID | CST_COST_TYPES |
| CST_PAC_EAM_WO_EST_STATUSES.COST_TYPE_ID | CST_COST_TYPES |
| CST_PAC_PERIODS.COST_TYPE_ID | CST_COST_TYPES |
| CST_RCV_ACQ_COSTS.COST_TYPE_ID | CST_COST_TYPES |
| CST_RESOURCE_COSTS.COST_TYPE_ID | CST_COST_TYPES |
| CST_RESOURCE_OVERHEADS.COST_TYPE_ID | CST_COST_TYPES |
| MTL_ABC_COMPILE_HEADERS.COST_TYPE | CST_COST_TYPES |
| MTL_FISCAL_CAT_ACCOUNTS.COST_TYPE_ID | CST_COST_TYPES |
| MTL_PAC_ACTUAL_COST_DETAILS.COST_TYPE_ID | CST_COST_TYPES |
| MTL_PAC_COST_SUBELEMENTS.COST_TYPE_ID | CST_COST_TYPES |
| MTL_PAC_TXN_COST_DETAILS.COST_TYPE_ID | CST_COST_TYPES |
| PA_PLAN_RES_DEFAULTS.MFC_COST_TYPE_ID | CST_COST_TYPES |
| PA_RESOURCE_ASSIGNMENTS.MFC_COST_TYPE_ID | CST_COST_TYPES |
| PA_RESOURCE_LIST_MEMBERS.MFC_COST_TYPE_ID | CST_COST_TYPES |
| WIP_PAC_ACTUAL_COST_DETAILS.COST_TYPE_ID | CST_COST_TYPES |
| WIP_PAC_PERIOD_BALANCES.COST_TYPE_ID | CST_COST_TYPES |
CST_COST_TYPES stores cost type definitions. The table is seeded with three cost types: Frozen, Average, and Pending. The Frozen cost type is used in standard costing organizations.
The average cost type is used in average costing organizations. All costs reference a cost type.
PL_ELEMENT_FLAG, PL_RESOURCE_FLAG, PL_OPERATION_FLAG, PL_ACTIVITY_FLAG values are used by the Cost Rollup to determine whether to group rollup costs by cost element, sub element, operation sequence number, or activity. BOM_SNAPSHOT_FLAG is used by the Cost Rollup to determine whether to save the bill structure when rolling up costs for a cost type.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_COST_TYPES_U1 | UNIQUE | APPS_TS_TX_IDX | COST_TYPE_ID |
| CST_COST_TYPES_U2 | UNIQUE | APPS_TS_TX_IDX |
COST_TYPE
ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| COST_TYPE | VARCHAR2 | (10) | Y | Cost type name |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| COSTING_METHOD_TYPE | NUMBER | Y | Costing method used, standard or average | |
| FROZEN_STANDARD_FLAG | NUMBER | Whether it is frozen standard cost type or not | ||
| DEFAULT_COST_TYPE_ID | NUMBER | Y | Cost type identifier used as the default cost type when rolling up costs | |
| BOM_SNAPSHOT_FLAG | NUMBER | Y | Whether to save the bill structure when rolling up costs | |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator | |
| ALLOW_UPDATES_FLAG | NUMBER | Whether the costs defined for this cost type can be changed | ||
| PL_ELEMENT_FLAG | NUMBER | Y | Whether to group previous level cost by cost element | |
| PL_RESOURCE_FLAG | NUMBER | Y | Whether to group previous level cost by subelement | |
| PL_OPERATION_FLAG | NUMBER | Y | Whether to group previous level cost by operation sequence number | |
| PL_ACTIVITY_FLAG | NUMBER | Y | Whether to group previous level cost by activity | |
| DISABLE_DATE | DATE | Inactive On/After | ||
| AVAILABLE_TO_ENG_FLAG | NUMBER | Whether the set of cost for this cost type is available for Oracle Engineering | ||
| COMPONENT_YIELD_FLAG | NUMBER | Y | Whether to consider component yield factor when rolling up costs | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_COST_TYPES does not reference any database object
BOM.CST_COST_TYPES is referenced by following:
| Description: | Cost rollups information and cost type purge information |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_COST_TYPE_HISTORY.COST_TYPE_ID | CST_COST_TYPES |
|
CST_COST_TYPE_HISTORY.INVENTORY_ITEM_ID
CST_COST_TYPE_HISTORY.ORGANIZATION_ID |
MTL_SYSTEM_ITEMS_B |
| CST_COST_TYPE_HISTORY.CATEGORY_ID | MTL_CATEGORIES_B |
| CST_COST_TYPE_HISTORY.CATEGORY_SET_ID | MTL_CATEGORY_SETS_B |
CST_COST_TYPE_HISTORY stores Cost Rollup information and cost type
purge information. You can obtain information about prior Cost
Rollups by requesting an Indented Bills of Material Cost Report.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_COST_TYPE_HISTORY_U1 | UNIQUE | APPS_TS_TX_IDX |
COST_TYPE_ID
ORGANIZATION_ID ROLLUP_DATE PURGE_DATE |
| CST_COST_TYPE_HISTORY_N1 | NONUNIQUE | APPS_TS_TX_IDX |
INVENTORY_ITEM_ID
ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ROLLUP_ID | NUMBER | Rollup identifier | ||
| ROLLUP_DATE | DATE | Cost Rollup run date | ||
| REPORT_OPTION | NUMBER | Report option | ||
| REPORT_TYPE | NUMBER | Report type | ||
| ROLLUP_OPTION | NUMBER | Rollup option, full or single level rollup | ||
| RANGE | NUMBER | Range option | ||
| REVISION_DATE | DATE | Effective date of the assembly | ||
| UNIMPLEMENTED_ECN_FLAG | NUMBER | Included unimplemented ECN in the cost type or not | ||
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator | |
| ALTERNATE_RTG_DESIGNATOR | VARCHAR2 | (10) | Alternate routing designator | |
| ENGINEERING_FLAG | NUMBER | Include engineering bills or not | ||
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier | ||
| CATEGORY_SET_ID | NUMBER | Category set identifier | ||
| CATEGORY_ID | NUMBER | Category identifier | ||
| CATEGORY | VARCHAR2 | (240) | Category name | |
| RANGE_LOW | VARCHAR2 | (240) | Inventory item from value | |
| RANGE_HIGH | VARCHAR2 | (240) | Inventory item to value | |
| PURGE_DATE | DATE | Date the cost type was deleted | ||
| PURGE_OPTION | NUMBER | Purge option | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column |
BOM.CST_COST_TYPE_HISTORY does not reference any database object
BOM.CST_COST_TYPE_HISTORY is referenced by following:
| Description: | Cost update history |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_COST_UPDATES.COST_TYPE_ID | CST_COST_TYPES |
| CST_COST_UPDATES.CATEGORY_ID | MTL_CATEGORIES_B |
| CST_COST_UPDATES.CATEGORY_SET_ID | MTL_CATEGORY_SETS_B |
| CST_COST_UPDATES.INV_ADJUSTMENT_ACCOUNT | GL_CODE_COMBINATIONS |
| Foreign Key Column | Foreign Table |
|---|---|
| CST_ELEMENTAL_COSTS.COST_UPDATE_ID | CST_COST_UPDATES |
| CST_ITEM_COSTS.COST_UPDATE_ID | CST_COST_UPDATES |
| CST_ITEM_COSTS_INTERFACE.COST_UPDATE_ID | CST_COST_UPDATES |
| CST_STANDARD_COSTS.COST_UPDATE_ID | CST_COST_UPDATES |
| CST_STANDARD_COSTS.LAST_COST_UPDATE_ID | CST_COST_UPDATES |
| CST_STD_COST_ADJ_DEBUG.COST_UPDATE_ID | CST_COST_UPDATES |
| CST_STD_COST_ADJ_TEMP.COST_UPDATE_ID | CST_COST_UPDATES |
| CST_STD_COST_ADJ_VALUES.COST_UPDATE_ID | CST_COST_UPDATES |
| WIP_SCRAP_VALUES.COST_UPDATE_ID | CST_COST_UPDATES |
CST_COST_UPDATES stores a record for every Update Standard Cost
request submitted. The adjustment columns for WIP may not include
adjustments for resource or overhead rates. They only include
standard cost adjustments for the items issued and completed from
Oracle Work in Process.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_COST_UPDATES_U1 | UNIQUE | APPS_TS_TX_IDX | COST_UPDATE_ID |
| CST_COST_UPDATES_U2 | UNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
COST_UPDATE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | Cost update session identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| STATUS | NUMBER | Y | Status of the cost update program | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| UPDATE_DATE | DATE | Cost update session start time | ||
| DESCRIPTION | VARCHAR2 | (240) | Y | Description |
| RANGE_OPTION | NUMBER | Y | Item range option | |
| UPDATE_RESOURCE_OVHD_FLAG | NUMBER | Y | Flag indicating whether resource and overhead costs should be updated | |
| UPDATE_ACTIVITY_FLAG | NUMBER | Flag indicating whether activity cost should be updated | ||
| SNAPSHOT_SAVED_FLAG | NUMBER | Flag indicating whether adjustment details should be saved | ||
| INV_ADJUSTMENT_ACCOUNT | NUMBER | Code combination identifier for the inventory adjustment account | ||
| SINGLE_ITEM | NUMBER | Inventory item identifier | ||
| ITEM_RANGE_LOW | VARCHAR2 | (240) | Inventory item range from | |
| ITEM_RANGE_HIGH | VARCHAR2 | (240) | Inventory item range to | |
| CATEGORY_ID | NUMBER | Category identifier | ||
| CATEGORY_SET_ID | NUMBER | Category set identifier | ||
| INVENTORY_ADJUSTMENT_VALUE | NUMBER | Adjustment total for on-hand inventories | ||
| INTRANSIT_ADJUSTMENT_VALUE | NUMBER | Adjustment total for intransit inventories | ||
| WIP_ADJUSTMENT_VALUE | NUMBER | Adjustment total for Work in Process | ||
| SCRAP_ADJUSTMENT_VALUE | NUMBER | Adjustment total for scrap | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_COST_UPDATES does not reference any database object
BOM.CST_COST_UPDATES is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_COST_UPDATES_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_COST_UPDATES prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ADJUSTMENT_VALUE | NUMBER | Adjustment total for on-hand inventories | ||
| WIP_ADJUSTMENT_VALUE | NUMBER | Adjustment total for work in progress | ||
| SCRAP_ADJUSTMENT_VALUE | NUMBER | Adjustment total for scrap | ||
| INTRANSIT_ADJUSTMENT_VALUE | NUMBER | Adjustment total for intransit inventories | ||
| COST_UPDATE_ID | NUMBER | Y | Cost update session identifier | |
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.CST_COST_UPDATES_EFC does not reference any database object
BOM.CST_COST_UPDATES_EFC is referenced by following:
| Description: | Department overhead cost definition |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_DEPARTMENT_OVERHEADS.DEPARTMENT_ID | BOM_DEPARTMENTS |
| CST_DEPARTMENT_OVERHEADS.COST_TYPE_ID | CST_COST_TYPES |
| CST_DEPARTMENT_OVERHEADS.ACTIVITY_ID | CST_ACTIVITIES |
| CST_DEPARTMENT_OVERHEADS.OVERHEAD_ID | BOM_RESOURCES |
CST_DEPARTMENT_OVERHEADS stores overhead rates by cost type.
You can define overhead rates using the Overheads and Departments
windows.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_DEPARTMENT_OVERHEADS_U1 | UNIQUE | APPS_TS_TX_IDX |
DEPARTMENT_ID
COST_TYPE_ID OVERHEAD_ID BASIS_TYPE |
| CST_DEPARTMENT_OVERHEADS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
OVERHEAD_ID
COST_TYPE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_ID | NUMBER | Y | Department identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OVERHEAD_ID | NUMBER | Y | Overhead sub-element identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| BASIS_TYPE | NUMBER | Y | Basis | |
| RATE_OR_AMOUNT | NUMBER | Y | Rate or amount for the overhead sub element | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_DEPARTMENT_OVERHEADS does not reference any database object
BOM.CST_DEPARTMENT_OVERHEADS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_DEPARTMENT_OVERHEADS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_DEPARTMENT_OVERHEADS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_ID | NUMBER | Y | Department Identifier | |
| OVERHEAD_ID | NUMBER | Y | Overhead Identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost Type Identifier | |
| RATE_OR_AMOUNT | NUMBER | Y | Rate or Amount | |
| SET_OF_BOOKS_ID | NUMBER | Set Of books identifier |
BOM.CST_DEPARTMENT_OVERHEADS_EFC does not reference any database object
BOM.CST_DEPARTMENT_OVERHEADS_EFC is referenced by following:
| Description: | Open interface table for overhead rate information |
|---|
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_ID | NUMBER | Department identifier | ||
| DEPARTMENT_CODE | VARCHAR2 | (20) | Department code | |
| COST_TYPE_ID | NUMBER | Cost type identifier | ||
| COST_TYPE | VARCHAR2 | (10) | Cost type name | |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| OVERHEAD_ID | NUMBER | Overhead Identifier | ||
| OVERHEAD | VARCHAR2 | (30) | Overhead Name | |
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| GROUP_ID | NUMBER | Group identifier | ||
| TRANSACTION_ID | NUMBER | Transaction identifier | ||
| PROCESS_FLAG | NUMBER | Indicates at what processing phase this row is in. Must be set to 1 initially | ||
| BASIS_TYPE | NUMBER | The basis Identifier 1. Item, 2. Lot, 3. Resource Units, 4. Resource Value, 5. Total Value, 6. Activity | ||
| RATE_OR_AMOUNT | NUMBER | Rate or Amount for the Overhead subelement | ||
| ACTIVITY_ID | NUMBER | Activity Identifier | ||
| ACTIVITY | VARCHAR2 | (20) | Activity Name | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| ERROR_CODE | VARCHAR2 | (240) | Error Code | |
| ERROR_EXPLANATION | VARCHAR2 | (240) | Error Explanation | |
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ERROR_FLAG | VARCHAR2 | (1) | Set to 'E' if there is an error | |
| GROUP_DESCRIPTION | VARCHAR2 | (80) | Description of Group |
BOM.CST_DEPT_OVERHEADS_INTERFACE does not reference any database object
BOM.CST_DEPT_OVERHEADS_INTERFACE is referenced by following:
| Description: | Temp table for Costing diagnostics |
|---|
Temp table for Costing diagnostics
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| BOTTLE_NECK_TXN_ID | NUMBER | Transaction id holding the costing of other transactions | ||
| TRANSACTION_DATE | DATE | Transaction date | ||
| TRANSACTION_ORGANIZATION_ID | NUMBER | Organization id in which transaction exists | ||
| TRANSFER_ORGANIZATION_ID | NUMBER | Transfer opposing organization id | ||
| TRANSFER_TRANSACTION_ID | NUMBER | Transaction id of the opposing transfer transaction | ||
| TRANSACTION_ACTION_ID | NUMBER | Transaction action identifier | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Transaction source type identifier | ||
| TRANSACTION_COST | NUMBER | Transaction source type identifier | ||
| SHIPMENT_COSTED | VARCHAR2 | (1) | Indicates if the shipment transaction has been processed by the cost worker | |
| MOVE_TRANSACTION_ID | NUMBER | Move transaction cross reference | ||
| COMPLETION_TRANSACTION_ID | NUMBER | Completion transaction cross reference | ||
| COSTED_FLAG | VARCHAR2 | (1) | Costed flag to mark if the transactions are costed or not | |
| WAITING_ORGANIZATION_ID | NUMBER | Organization id containing transactions to be costed | ||
| LOGICAL_TXN_CREATED | NUMBER | (1) | Flag to mark logical transactions are created or not |
BOM.CST_DIAG_ERRORED_TXNS does not reference any database object
BOM.CST_DIAG_ERRORED_TXNS is referenced by following:
| Description: | Holds temp data while executing Diagnostic scripts |
|---|
Holds temp data while executing Diagnostic scripts
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | Transaction identifier | ||
| ERROR_MESSAGE | VARCHAR2 | (800) | Brief description of Error | |
| RESOLUTION | VARCHAR2 | (500) | Actions required to resolve error |
BOM.CST_DIAG_TXN_ERRORS does not reference any database object
BOM.CST_DIAG_TXN_ERRORS is referenced by following:
| Description: | WIP resource transaction seeded data |
|---|
CST_DISTRIBUTION_MASTER is used to facilitate distribution processing for WIP
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DISTRIBUTION_TYPE | NUMBER | Y | Distribution type | |
| ACCOUNTING_LINE_TYPE | NUMBER | Y | Accounting line type | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column |
BOM.CST_DISTRIBUTION_MASTER does not reference any database object
BOM.CST_DISTRIBUTION_MASTER is referenced by following:
| Description: | Estimated costs for activities |
|---|
CST_EAM_ACTIVITY_ESTIMATES contains results from the EAM cost estimation process for EAM activities.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_EAM_ACTIVITY_ESTIMATES_N1 | NONUNIQUE | APPS_TS_TX_IDX | ACTIVITY_ESTIMATE_RECORD_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACTIVITY_ESTIMATE_RECORD_ID | NUMBER | Y | Activity Estimate Record Identifier | |
| RECORD_TYPE | VARCHAR2 | (1) | Y | Record Type |
| ORGANIZATION_ID | NUMBER | Organization Identifier | ||
| ACTIVITY_ITEM_ID | NUMBER | Activity Inventory Item Identifier | ||
| EAM_COST_ELEMENT | NUMBER | EAM Cost Element | ||
| MAINT_COST_CATEGORY | NUMBER | Maintenance Cost Category | ||
| COST_VALUE | NUMBER | Cost Value |
BOM.CST_EAM_ACTIVITY_ESTIMATES does not reference any database object
BOM.CST_EAM_ACTIVITY_ESTIMATES is referenced by following:
| Description: | Cost information by asset |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
CST_EAM_ASSET_PER_BALANCES.SERIAL_NUMBER
CST_EAM_ASSET_PER_BALANCES.INVENTORY_ITEM_ID CST_EAM_ASSET_PER_BALANCES.ORGANIZATION_ID |
MTL_SERIAL_NUMBERS |
| CST_EAM_ASSET_PER_BALANCES.MAINT_COST_CATEGORY | CST_EAM_COST_ELEMENTS |
The table stores details of actual, system estimated and manual estimated cost information for the assets over accounting periods
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_EAM_ASSET_PER_BALANCES_N1 | NONUNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
INVENTORY_ITEM_ID SERIAL_NUMBER PERIOD_SET_NAME PERIOD_NAME MAINT_COST_CATEGORY ACCT_PERIOD_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period set name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period name |
| ACCT_PERIOD_ID | NUMBER | Accounting period identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier for the asset | ||
| SERIAL_NUMBER | VARCHAR2 | (30) | Serial number | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| MAINT_COST_CATEGORY | NUMBER | Y | Maintenance cost category | |
| ACTUAL_MAT_COST | NUMBER | Actual material cost | ||
| ACTUAL_LAB_COST | NUMBER | Actual labor cost | ||
| ACTUAL_EQP_COST | NUMBER | Actual equipment cost | ||
| SYSTEM_ESTIMATED_MAT_COST | NUMBER | System estimated material cost | ||
| SYSTEM_ESTIMATED_LAB_COST | NUMBER | System estimated labor cost | ||
| SYSTEM_ESTIMATED_EQP_COST | NUMBER | System estimated equipment cost | ||
| MANUAL_ESTIMATED_MAT_COST | NUMBER | Manual estimated material cost | ||
| MANUAL_ESTIMATED_LAB_COST | NUMBER | Manual estimated labor cost | ||
| MANUAL_ESTIMATED_EQP_COST | NUMBER | Manual estimated equipment cost | ||
| PERIOD_START_DATE | DATE | Y | Period start date | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| REQUEST_ID | NUMBER | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who column | ||
| MAINTENANCE_OBJECT_ID | NUMBER | Maintenance Object Identifier | ||
| MAINTENANCE_OBJECT_TYPE | NUMBER | Maintenance Object Type |
BOM.CST_EAM_ASSET_PER_BALANCES does not reference any database object
BOM.CST_EAM_ASSET_PER_BALANCES is referenced by following:
| Description: | Estimated Cost Information by WIP Accounting Class Accounts |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_EAM_BALANCE_BY_ACCOUNTS.WIP_ENTITY_ID | WIP_DISCRETE_JOBS |
|
CST_EAM_BALANCE_BY_ACCOUNTS.ACCT_PERIOD_ID
CST_EAM_BALANCE_BY_ACCOUNTS.ORGANIZATION_ID |
ORG_ACCT_PERIODS |
| CST_EAM_BALANCE_BY_ACCOUNTS.OWNING_DEPT_ID | BOM_DEPARTMENTS |
| CST_EAM_BALANCE_BY_ACCOUNTS.MFG_COST_ELEMENT_ID | CST_COST_ELEMENTS |
| CST_EAM_BALANCE_BY_ACCOUNTS.TXN_TYPE | CST_EAM_COST_ELEMENTS |
This table stores estimated costs based on WIP Entity and the GL accounts that the charges are expected to hit.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_EAM_BALANCE_BY_ACCOUNTS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
WIP_ENTITY_ID
ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| ACCT_PERIOD_ID | NUMBER | Account Period Id | ||
| WIP_ENTITY_ID | NUMBER | Y | Wip Entity Id | |
| ORGANIZATION_ID | NUMBER | Y | Organization id | |
| OPERATIONS_DEPT_ID | NUMBER | Operations Department Id | ||
| OPERATIONS_SEQ_NUM | NUMBER | Operations Department Id | ||
| MAINT_COST_CATEGORY | NUMBER | Y | Maintenance cost category | |
| OWNING_DEPT_ID | NUMBER | Y | Owning department id | |
| PERIOD_START_DATE | DATE | Y | Period start date | |
| ACCOUNT_ID | NUMBER | Y | Wip Accounting Class Account Id | |
| ACCT_VALUE | NUMBER | Y | Amount charged to the account | |
| TXN_TYPE | NUMBER | Y | Material, Labor or Equipment | |
| WIP_ACCT_CLASS_CODE | VARCHAR2 | (10) | Y | WIP Accounting Class Code |
| MFG_COST_ELEMENT_ID | NUMBER | Y | Manufacturing Cost Element Id | |
| CREATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| LAST_UPDATE_DATE | DATE | Standard Who column |
BOM.CST_EAM_BALANCE_BY_ACCOUNTS does not reference any database object
BOM.CST_EAM_BALANCE_BY_ACCOUNTS is referenced by following:
| Description: | EAM cost elements |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_EAM_ASSET_PER_BALANCES.MAINT_COST_CATEGORY | CST_EAM_COST_ELEMENTS |
| CST_EAM_BALANCE_BY_ACCOUNTS.TXN_TYPE | CST_EAM_COST_ELEMENTS |
| WIP_EAM_PARAMETERS.DEF_EAM_COST_ELEMENT_ID | CST_EAM_COST_ELEMENTS |
| WIP_EAM_PERIOD_BALANCES.MAINT_COST_CATEGORY | CST_EAM_COST_ELEMENTS |
This table stores the cost elements used in eAM to classify asset costs
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_EAM_COST_ELEMENTS_U1 | UNIQUE | APPS_TS_SEED | EAM_COST_ELEMENT_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EAM_COST_ELEMENT_ID | NUMBER | Y | eAM cost element identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| EAM_COST_ELEMENT | VARCHAR2 | (50) | Y | eAM cost element |
| DESCRIPTION | VARCHAR2 | (240) | Y | Description of eAM cost element |
| REQUEST_ID | NUMBER | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who column | ||
| PROGRAM_ID | NUMBER | Standard Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who column |
BOM.CST_EAM_COST_ELEMENTS does not reference any database object
BOM.CST_EAM_COST_ELEMENTS is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| WORK_ORDER_NUMBER | NUMBER | |||
| TASK_NUMBER | NUMBER | |||
| ORGANIZATION_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | |||
| REQUISITION_NUMBER | VARCHAR2 | (10) | ||
| PO_NUMBER | VARCHAR2 | (10) | ||
| ITEM_DESCRIPTION | VARCHAR2 | (200) | ||
| UOM_CODE | VARCHAR2 | (10) | ||
| UNIT_PRICE | NUMBER | |||
| RQL_ORDERED | NUMBER | |||
| QUANTITY_ORDERED | NUMBER | |||
| QUANTITY_RECEIVED | NUMBER | |||
| LATEST_DELIVERY_DATE | DATE | |||
| PO_QUANTITY_ORDERED | NUMBER | |||
| PO_QUANTITY_CANCELLED | NUMBER | |||
| SUPPLIER_NAME | VARCHAR2 | (200) | ||
| SUPPLIER_NUMBER | NUMBER | |||
| LINE_LOCATION_ID | NUMBER | |||
| PO_LINE_CANCEL_FLAG | VARCHAR2 | (10) | ||
| ITEM_ID | NUMBER | |||
| CLOSED_CODE | VARCHAR2 | (10) | ||
| PO_CLOSED_CODE | VARCHAR2 | (10) | ||
| REQ_AUTHORIZATION_STATUS | VARCHAR2 | (20) | ||
| PO_AUTHORIZATION_STATUS | VARCHAR2 | (20) | ||
| PO_LINE_ID | NUMBER | |||
| PO_HEADER_ID | NUMBER | |||
| REQUISITION_HEADER_ID | NUMBER | |||
| DIRECT_ITEM_SEQUENCE_ID | NUMBER | |||
| CATEGORY_ID | NUMBER | |||
| PO_RELEASE_ID | NUMBER | |||
| REQUISITION_LINE_ID | NUMBER | |||
| ORDER_TYPE_LOOKUP_CODE | VARCHAR2 | (30) | ||
| AMOUNT | NUMBER | |||
| AMOUNT_DELIVERED | NUMBER | |||
| REQ_DISTRIBUTION_ID | NUMBER | |||
| CATEGORY_DATE | DATE | |||
| PROJECT_ID | NUMBER | |||
| PURCHASING_OU_ID | NUMBER | |||
| SET_OF_BOOKS_ID | NUMBER | |||
| TXN_FLOW_HEADER_ID | NUMBER | |||
| RECEIVING_OU_ID | NUMBER | |||
| CURRENCY_CODE | VARCHAR2 | (20) | ||
| CURRENCY_DATE | DATE | |||
| CURRENCY_TYPE | VARCHAR2 | (20) | ||
| CURRENCY_RATE | NUMBER | |||
| DOCUMENT_TYPE | VARCHAR2 | (30) | ||
| IS_SHARED_PROC | VARCHAR2 | (1) |
BOM.CST_EAM_DIRECT_ITEMS_TEMP does not reference any database object
BOM.CST_EAM_DIRECT_ITEMS_TEMP is referenced by following:
| Description: | This temporary table contains a snapshot of hierarchies for which a cost rollup is required |
|---|
This temporary table contains a snapshot of hierarchies for which a cost rollup is required. Each hierarchy is denoted by a unique GROUP_ID.
There are multiple hierarchy types that can be inserted into this table: Asset Hierarchy, Work Order Hierarchy, CMRO Execution Schedule and CMRO summary tasks. The hierarchy types are differentiated by the type of nodes that they consist of. For example, Asset Hierarchies consist of Asset nodes (OBJECT_TYPE of 1) while CMRO Execution Schedules consist of Work Order nodes (OBJECT_TYPE of 2) and Summary Tasks (OBJECT_TYPE of NULL).
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_EAM_HIERARCHY_SNAPSHOT_N1 | NONUNIQUE | APPS_TS_INTERFACE |
GROUP_ID
OBJECT_ID OBJECT_TYPE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| GROUP_ID | NUMBER | Y | An identifier for the hierarchy that this record makes up | |
| OBJECT_ID | NUMBER | Y | The entity id of the current node | |
| PARENT_OBJECT_ID | NUMBER | Y | The entity id of the current node's parent | |
| LEVEL_NUM | NUMBER | Y | A relative depth indicator of the hierarchy. The root node is indicated by level 0. | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| REQUEST_ID | NUMBER | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| OBJECT_TYPE | NUMBER | (15) | The entity type of the current node | |
| PARENT_OBJECT_TYPE | NUMBER | (15) | The entity type of the current node's parent |
BOM.CST_EAM_HIERARCHY_SNAPSHOT does not reference any database object
BOM.CST_EAM_HIERARCHY_SNAPSHOT is referenced by following:
| Description: | Temporary table to store rollup costs |
|---|
This temporary table stores the cumulative cost details of the hierarchies stored in CST_EAM_HIEARCHY_SNAPSHOT.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_EAM_ROLLUP_COSTS_U1 | UNIQUE | APPS_TS_INTERFACE |
GROUP_ID
OBJECT_ID OBJECT_TYPE MAINT_COST_CATEGORY PERIOD_SET_NAME PERIOD_NAME |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| GROUP_ID | NUMBER | (15) | Y | An identifier for the hierarchy that this record corresponds to |
| OBJECT_TYPE | NUMBER | (15) | The entity type of the current node | |
| OBJECT_ID | NUMBER | (15) | Y | The entity type of the current node |
| ACCT_PERIOD_ID | NUMBER | (15) | ||
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| MAINT_COST_CATEGORY | NUMBER | (15) | Y | The maintenance cost category |
| ACTUAL_MAT_COST | NUMBER | The actual material cost of this entity and its descendants | ||
| ACTUAL_LAB_COST | NUMBER | The actual labor cost of this entity and its descendants | ||
| ACTUAL_EQP_COST | NUMBER | The actual equipment cost of this entity and its descendants | ||
| ESTIMATED_MAT_COST | NUMBER | The estimated material cost of this entity and its descendants | ||
| ESTIMATED_LAB_COST | NUMBER | The estimated labor cost of this entity and its descendants | ||
| ESTIMATED_EQP_COST | NUMBER | The estimated equipment cost of this entity and its descendants | ||
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | (15) | Standard Who column | |
| CREATION_DATE | DATE | Standard Who column | ||
| CREATION_BY | NUMBER | (15) | Standard Who column | |
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Standard Who column |
BOM.CST_EAM_ROLLUP_COSTS does not reference any database object
BOM.CST_EAM_ROLLUP_COSTS is referenced by following:
| Description: | Temporary table for assets rollup |
|---|
The temporary table contains details of actual, system estimated and manual estimated cost information rolled up over the hierarchy of assets.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_EAM_ROLLUP_TEMP_U1 | UNIQUE | APPS_TS_INTERFACE |
GROUP_ID
ORGANIZATION_ID INVENTORY_ITEM_ID PERIOD_SET_NAME PERIOD_NAME SERIAL_NUMBER ACCT_PERIOD_ID MAINT_COST_CATEGORY |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| GROUP_ID | NUMBER | Y | Group identifier | |
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period set name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period name |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Y | Serial number |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ACCT_PERIOD_ID | NUMBER | Accounting period identifier | ||
| MAINT_COST_CATEGORY | NUMBER | Y | Maintenance cost category | |
| ACTUAL_MAT_COST | NUMBER | Actual material cost | ||
| ACTUAL_LAB_COST | NUMBER | Actual labor cost | ||
| ACTUAL_EQP_COST | NUMBER | Actual equipment cost | ||
| SYSTEM_ESTIMATED_MAT_COST | NUMBER | System estimated material cost | ||
| SYSTEM_ESTIMATED_LAB_COST | NUMBER | System estimated labor cost | ||
| SYSTEM_ESTIMATED_EQP_COST | NUMBER | System estimated equipment cost | ||
| MANUAL_ESTIMATED_MAT_COST | NUMBER | Manual estimated material cost | ||
| MANUAL_ESTIMATED_LAB_COST | NUMBER | Manual estimated labor cost | ||
| MANUAL_ESTIMATED_EQP_COST | NUMBER | Manual estimated equipment cost | ||
| PERIOD_START_DATE | DATE | Y | Period start date | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who columns | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who columns | |
| CREATION_DATE | DATE | Y | Standard Who columns | |
| CREATED_BY | NUMBER | Y | Standard Who columns | |
| REQUEST_ID | NUMBER | Standard Who columns | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who columns | ||
| MAINTENANCE_OBJECT_ID | NUMBER | Maintenance Object Identifier | ||
| MAINTENANCE_OBJECT_TYPE | NUMBER | Maintenance Object Type |
BOM.CST_EAM_ROLLUP_TEMP does not reference any database object
BOM.CST_EAM_ROLLUP_TEMP is referenced by following:
| Description: | Details of estimated cost for work orders |
|---|
CST_EAM_WO_ESTIMATE_DETAILS contains results from the EAM cost estimation process for EAM work orders.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_EAM_WO_ESTIMATE_DETAILS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
MAINT_COST_CATEGORY
WIP_ENTITY_ID OPERATIONS_SEQ_NUM ORGANIZATION_ID |
| CST_EAM_WO_ESTIMATE_DETAILS_N2 | NONUNIQUE | APPS_TS_TX_IDX |
WIP_ENTITY_ID
OPERATIONS_SEQ_NUM |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| WIP_ENTITY_ID | NUMBER | Y | WIP Entity Id - Identifier of Work Order | |
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier of Work Order | |
| OPERATIONS_DEPT_ID | NUMBER | Assigned Department Identifier of Operation | ||
| OPERATIONS_SEQ_NUM | NUMBER | Operation Sequence Number | ||
| MAINT_COST_CATEGORY | NUMBER | Y | Maintenance Cost Category | |
| OWNING_DEPT_ID | NUMBER | Owning Department Identifier | ||
| DEPT_OVERHEAD_COST | NUMBER | Overhead Cost for the Department | ||
| ESTIMATED_COST | NUMBER | Y | Estimated Cost | |
| RESOURCE_ID | NUMBER | Resource Identifier | ||
| RESOURCE_RATE | NUMBER | Resource Rate | ||
| USAGE_RATE | NUMBER | Usage Rate | ||
| UOM | VARCHAR2 | (15) | Unit of Measure | |
| RESOURCE_INSTANCE_ID | NUMBER | Instance Identifier of the Resource | ||
| RESOURCE_INSTANCE_RATE | NUMBER | Instance Rate for the Resource | ||
| RESOURCE_USAGE | NUMBER | Resource Usage | ||
| INVENTORY_ITEM_ID | NUMBER | Inventory Item Identifier | ||
| ITEM_COST | NUMBER | Item Cost | ||
| REQUIRED_QUANTITY | NUMBER | Required Quantity of Material | ||
| REQUISITION_HEADER_ID | NUMBER | Requisition Header Id | ||
| PO_HEADER_ID | NUMBER | Purchase Order header ID | ||
| RATE | NUMBER | Conversion rate | ||
| DIRECT_ITEM | VARCHAR2 | (1) | Flag to determine whether it is a direct item | |
| REQUISITION_LINE_ID | NUMBER | Requisition Line Identifier | ||
| PO_DISTRIBUTION_ID | NUMBER | Purchase Order Distribution Identifier | ||
| LINE_LOCATION_ID | NUMBER | Line Location Identifier | ||
| ITEM_DESCRIPTION | VARCHAR2 | (240) | Item Description | |
| PO_LINE_CANCEL_FLAG | VARCHAR2 | (1) | Cancel flag for Purchase Order Line | |
| REQ_LINE_CANCEL_FLAG | VARCHAR2 | (1) | Cancel flag for Requisition Line | |
| REQ_AUTH_STATUS | VARCHAR2 | (30) | Requisition Authorization Status | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Standard Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who Column | ||
| PROGRAM_ID | NUMBER | Standard Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who Column |
BOM.CST_EAM_WO_ESTIMATE_DETAILS does not reference any database object
BOM.CST_EAM_WO_ESTIMATE_DETAILS is referenced by following:
| Description: | Standard elemental cost history |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_ELEMENTAL_COSTS.COST_UPDATE_ID | CST_COST_UPDATES |
| CST_ELEMENTAL_COSTS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
CST_ELEMENTAL_COSTS stores the elemental item cost history for every
cost update. One record is inserted for each cost element for each
item. You can view this information in the Standard Cost History
window.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ELEMENTAL_COSTS_U1 | UNIQUE | APPS_TS_TX_IDX |
COST_UPDATE_ID
ORGANIZATION_ID INVENTORY_ITEM_ID COST_ELEMENT_ID |
| CST_ELEMENTAL_COSTS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
INVENTORY_ITEM_ID
ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | Cost update session identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| STANDARD_COST | NUMBER | Elemental cost for the cost element after cost update | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_ELEMENTAL_COSTS does not reference any database object
BOM.CST_ELEMENTAL_COSTS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_ELEMENTAL_COSTS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_ELEMENTAL_COSTS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item Identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| STANDARD_COST | NUMBER | Standard Cost | ||
| COST_UPDATE_ID | NUMBER | Y | Cost Update Identifier | |
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.CST_ELEMENTAL_COSTS_EFC does not reference any database object
BOM.CST_ELEMENTAL_COSTS_EFC is referenced by following:
| Description: | Stores encumbrance account distributions for periodic costing |
|---|
CST_ENCUMBRANCE_LINES stores accounting distributions associated with receipt transactions during periodic costing
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ENCUMBRANCE_LINE_ID | NUMBER | (15) | Y | Unique Identifier |
| AE_HEADER_ID | NUMBER | (15) | Y | Accounting Event Identifier |
| AE_LINE_NUMBER | NUMBER | Y | Accounting Entry Line Number | |
| AE_LINE_TYPE_CODE | VARCHAR2 | (30) | Accounting Line Type Code | |
| CODE_COMBINATION_ID | NUMBER | (15) | Account Identifier | |
| CURRENCY_CODE | VARCHAR2 | (15) | Currency Code | |
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | Currency Conversion Type | |
| CURRENCY_CONVERSION_DATE | DATE | Currency Conversion Date | ||
| CURRENCY_CONVERSION_RATE | NUMBER | Currency Conversion Exchange Rate | ||
| ENTERED_DR | NUMBER | Accounting Debit Entry | ||
| ENTERED_CR | NUMBER | Accounting Credit Entry | ||
| ACCOUNTED_DR | NUMBER | Accounting Debit entry in functional currency | ||
| ACCOUNTED_CR | NUMBER | Accounting Credit entry in functional currency | ||
| SOURCE_TABLE | VARCHAR2 | (30) | Accounting entry source table | |
| SOURCE_ID | NUMBER | (15) | Accounting source Identifier | |
| RATE_OR_AMOUNT | NUMBER | Per Unit Rate | ||
| BASIS_TYPE | NUMBER | Basis Type for WIP | ||
| RESOURCE_ID | NUMBER | (15) | Resource Identifier for WIP | |
| COST_ELEMENT_ID | NUMBER | (15) | Cost Element Identifier | |
| ACTIVITY_ID | NUMBER | (15) | Activity Identifier | |
| REPETITIVE_SCHEDULE_ID | NUMBER | (15) | Repetitive Schedule Identifier | |
| OVERHEAD_BASIS_FACTOR | NUMBER | Overhead Basis Factor for WIP | ||
| BASIS_RESOURCE_ID | NUMBER | (15) | Basis Resource Identifier for WIP | |
| GL_SL_LINK_ID | NUMBER | (15) | Link to General Ledger | |
| DESCRIPTION | VARCHAR2 | (240) | Description of Accounting Entry line | |
| ACCOUNTING_ERROR_CODE | VARCHAR2 | (30) | Accounting Error Code | |
| STAT_AMOUNT | NUMBER | Stat Amount | ||
| USSGL_TRANSACTION_CODE | VARCHAR2 | (30) | USSGL Transaction Code | |
| SUBLEDGER_DOC_SEQUENCE_ID | NUMBER | (15) | Subledger Document Sequence Identifier | |
| SUBLEDGER_DOC_SEQUENCE_VALUE | NUMBER | Subledger Document Sequence Value | ||
| GL_TRANSFER_ERROR_CODE | VARCHAR2 | (240) | General Ledger Transfer Error Code | |
| ENCUMBRANCE_TYPE_ID | NUMBER | Y | Encumbrance Type Identifier | |
| REFERENCE1 | VARCHAR2 | (240) | Reference column | |
| REFERENCE2 | VARCHAR2 | (240) | Reference column | |
| REFERENCE3 | VARCHAR2 | (240) | Reference column | |
| REFERENCE4 | VARCHAR2 | (240) | Reference column | |
| REFERENCE5 | VARCHAR2 | (240) | Reference column | |
| REFERENCE6 | VARCHAR2 | (240) | Reference column | |
| REFERENCE7 | VARCHAR2 | (240) | Reference column | |
| REFERENCE8 | VARCHAR2 | (240) | Reference column | |
| REFERENCE9 | VARCHAR2 | (240) | Reference column | |
| REFERENCE10 | VARCHAR2 | (240) | Reference column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Y | Standard Who column |
| PROGRAM_UPDATE_DATE | DATE | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Standard Who column | |
| PROGRAM_ID | NUMBER | (15) | Standard Who column | |
| REQUEST_ID | NUMBER | (15) | Standard Who column | |
| PO_DISTRIBUTION_ID | NUMBER | Purchase Order Distribution Identifier for Receiving Transactions |
BOM.CST_ENCUMBRANCE_LINES does not reference any database object
BOM.CST_ENCUMBRANCE_LINES is referenced by following:
| Description: | Temporary, indented bill of material |
|---|
CST_EXPLOSION_TEMP stores temporary, indented bill of material
structures and is populated during the Cost Rollup process.
GROUP_ID identifies all rows generated by an explosion. DELETED
and LOOP_COUNT are used by the exploder during the explosion process
to compute low level codes.
CST_EXPLOSION_TEMP is used only for full Cost Rollups, for all
items, and when no report is requested in the Cost Rollup.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_EXPLOSION_TEMP_N1 | NONUNIQUE | APPS_TS_TX_IDX |
ASSEMBLY_ITEM_ID
GROUP_ID LOOP_COUNT |
| CST_EXPLOSION_TEMP_N2 | NONUNIQUE | APPS_TS_TX_IDX |
GROUP_ID
COMPONENT_ITEM_ID DELETED |
| CST_EXPLOSION_TEMP_N3 | NONUNIQUE | APPS_TS_TX_IDX |
GROUP_ID
PLAN_LEVEL COMPONENT_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| GROUP_ID | NUMBER | Explosion identifier | ||
| ASSEMBLY_ITEM_ID | NUMBER | Assembly item identifier | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| DELETED | VARCHAR2 | (1) | Indicates if assembly has been assigned a low level code | |
| LOOP_COUNT | NUMBER | Explosion iteration at which assembly is assigned a low level code | ||
| TOP_BILL_SEQUENCE_ID | NUMBER | Bill identifier of level 0 items | ||
| TOP_ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate designator for level 0 | |
| PLAN_LEVEL | NUMBER | Level in bill |
BOM.CST_EXPLOSION_TEMP does not reference any database object
BOM.CST_EXPLOSION_TEMP is referenced by following:
| Description: | Temporary table for item cost inquiry |
|---|
CST_INQUIRY_TEMP stores item cost information used by the View Item
Cost Information window for each inquiry session. The window has two
templates (summary and summary by level) to display item costs.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_INQUIRY_TEMP_N1 | NONUNIQUE | APPS_TS_NOLOGGING | SESSION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | Y | Oracle session identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number in a routing | ||
| OPERATION_SEQUENCE_ID | NUMBER | Operation sequence identifier | ||
| DEPARTMENT_ID | NUMBER | Department identifier | ||
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| RESOURCE_ID | NUMBER | Resource identifier (subelement) | ||
| ITEM_COST | NUMBER | Y | Item unit cost | |
| COST_ELEMENT_ID | NUMBER | Cost element identifier | ||
| THIS_LEVEL_COSTS | NUMBER | This level cost | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level cost | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (240) | Column 1 value for the Summary By Level template in the View Item Cost information | |
| COLUMN2_VALUE_2A | VARCHAR2 | (240) | Column 2 value for the Summary By Level template in the View Item Cost information | |
| COLUMN1_VALUE_2B | VARCHAR2 | (240) | Column 1 value for the Summary template in the View Item Cost information | |
| COLUMN2_VALUE_2B | VARCHAR2 | (240) | Column 2 value for the Summary template in the View Item Cost information | |
| DESCRIPTION_COLUMN | VARCHAR2 | (240) | Column 3 value for the Summary template in the View Item Cost information | |
| VALUE_ADDED_ACTIVITY_FLAG | NUMBER | Not currently used | ||
| GUI_COLUMN1 | VARCHAR2 | (240) | Activity | |
| GUI_COLUMN2 | VARCHAR2 | (240) | Department code | |
| GUI_DESCRIPTION | VARCHAR2 | (240) | Description | |
| YIELDED_COSTS | NUMBER | Inflation in item cost for operation yield in WSM organizations |
BOM.CST_INQUIRY_TEMP does not reference any database object
BOM.CST_INQUIRY_TEMP is referenced by following:
| Description: | Types of item cost inquiry |
|---|
CST_INQUIRY_TYPES stores item cost inquiry option information. This
information is used by the View Item Costs Summary window.
.
The INQUIRY_NAME column stores the option name. The UNIQUE_ID column
stores the unique identifier for INQUIRY_NAME. For example,
UNIQUE_ID '13' corresponds to the inquiry 'Element by level.' You can
create user-defined inquiries by entering 1 in the USER_DEFINED
column. The UNIQUE_ID for user-defined inquiries is determined by
the sequence CST_INQUIRY_TYPES_S.
.
Each inquiry is associated with a template type
(GUI_TEMPLATE_TYPE). The template type determines which columns are
displayed in the View Item Costs Summary window. For example, when
an inquiry that is associated with the template type 'Single entity
cost summary' is selected, two columns are displayed. However, when
an inquiry that is associated with the template type 'Two entity cost
summary' is selected, three columns are displayed.
.
The actual column headings displayed in the View Item Costs Summary
window are determined by the exact inquiry selected. For example,
although both the 'Activity Summary' and 'Element Summary' inquiries
are associated with the two column 'Single entity cost summary'
template type, the column headings Activity and Description
(corresponding to GUI_COL2_PROMPT_BOTTOM and GUI_DESC_PROMPT) are
displayed when the former is chosen, while the column headings Cost,
Element, and Description (corresponding to GUI_COL2_PROMPT_TOP,
GUI_COL2_PROMPT_BOTTOM and GUI_DESC_PROMPT)
are displayed when the latter is chosen.
.
The VIEW_NAME column stores the view name that is used when the View
Item Cost Summary window copies queried cost information to the
CST_INQUIRY_TEMP table. Different views are used for different
inquiries. For example, if you choose 'Activity summary,' the
VIEW_NAME is 'CST_ELEMENT_COST_VIEW.'
.
FLEXFIELD_APPLICATION_ID and DESCRIPTIVE_FLEXFIELD_NAME store the
application identifier and descriptive flexfield name for those
inquiry options that display costs by flexfield segment value and
require the user to choose a flexfield segment. They are used to
retrieve segments for the flexfield.
.
INVENTORY_FLAG specifies whether this option is available in a
standalone inventory installation. Some of the detail options are not
needed for standalone inventory installations, such as Element by
operation.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_INQUIRY_TYPES_U1 | UNIQUE | APPS_TS_SEED | UNIQUE_ID |
| CST_INQUIRY_TYPES_U2 | UNIQUE | APPS_TS_SEED | INQUIRY_NAME |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| UNIQUE_ID | NUMBER | Y | Unique identifier for the inquiry name | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| INQUIRY_NAME | VARCHAR2 | (50) | Y | Cost type detail option |
| DESCRIPTION | VARCHAR2 | (240) | Inquiry option description | |
| USER_DEFINED | NUMBER | Y | User defined option | |
| TEMPLATE_TYPE | NUMBER | Y | No longer used | |
| GUI_TEMPLATE_TYPE | NUMBER | Template type | ||
| VIEW_NAME | VARCHAR2 | (30) | Y | Name of view to be copied into CST_INQUIRY_TEMP |
| COLUMN1_HEADING | VARCHAR2 | (50) | No longer used | |
| COLUMN2_HEADING | VARCHAR2 | (50) | No longer used | |
| DESCRIPTION_COLUMN_HEADING | VARCHAR2 | (50) | No longer used | |
| GUI_COL1_PROMPT_TOP | VARCHAR2 | (50) | First line of column heading for GUI_COL1 | |
| GUI_COL1_PROMPT_BOTTOM | VARCHAR2 | (50) | Second line of column heading for GUI_COL1 | |
| GUI_COL2_PROMPT_TOP | VARCHAR2 | (50) | First line of column heading for GUI_COL2 | |
| GUI_COL2_PROMPT_BOTTOM | VARCHAR2 | (50) | Second line of column heading for GUI_COL2 | |
| GUI_DESC_PROMPT | VARCHAR2 | (50) | Column heading for description column | |
| INVENTORY_FLAG | NUMBER | Stand-alone inventory installation | ||
| DISABLE_DATE | DATE | Inactive On/After | ||
| FLEXFIELD_APPLICATION_ID | NUMBER | Application identifier | ||
| DESCRIPTIVE_FLEXFIELD_NAME | VARCHAR2 | (150) | Descriptive Flexfield name | |
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| CHAR_GUI_AVAILABLE | NUMBER | Y | Flag to determine which version of the application the view could appear in |
BOM.CST_INQUIRY_TYPES does not reference any database object
BOM.CST_INQUIRY_TYPES is referenced by following:
| Description: | Stores invalid records due to error in the item cost definition |
|---|
CST_INTERFACE_ERRORS stores erroneous records from
CST_ITEM_CST_DTLS_INTERFACE. Records may be inserted into this table
when a Copy Cost Information request is submitted.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_INTERFACE_ERRORS_N1 | NONUNIQUE | APPS_TS_INTERFACE | GROUP_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| GROUP_ID | NUMBER | Y | Group identifier | |
| INVENTORY_ITEM | VARCHAR2 | (240) | Concatenated inventory item segment | |
| ENTITY_CODE | VARCHAR2 | (80) | Erroneous entity code | |
| ERROR_TYPE | NUMBER | Erroneous entity type |
BOM.CST_INTERFACE_ERRORS does not reference any database object
BOM.CST_INTERFACE_ERRORS is referenced by following:
| Description: | A temporary table to store intermediate results for period close summarization and inventory valuation reports |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_SOURCE | NUMBER | (3) | Y | Identifies the code module that has created the row |
| ORGANIZATION_ID | NUMBER | (15) | Y | Organization identifier |
| INVENTORY_ITEM_ID | NUMBER | (15) | Item identifier | |
| COST_TYPE_ID | NUMBER | (15) | The item costs and asset status correspond to this cost type | |
| COST_GROUP_ID | NUMBER | (15) | In actual costing organizations, the item costs correspond to this cost group | |
| RCV_TRANSACTION_ID | NUMBER | (15) | Receiving transaction identifier | |
| ITEM_COST | NUMBER | Item unit cost | ||
| MATERIAL_COST | NUMBER | Material cost | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material overhead cost | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside processing cost | ||
| RESOURCE_COST | NUMBER | Resource cost | ||
| OVERHEAD_COST | NUMBER | Overhead cost | ||
| INVENTORY_ASSET_FLAG | NUMBER | (1) | Asset status of the item |
BOM.CST_INV_COST_TEMP does not reference any database object
BOM.CST_INV_COST_TEMP is referenced by following:
| Description: | Stores layer information |
|---|
CST_INV_LAYERS stores the inventory layers for each receipt transaction. One inventory layer is created for each receipt into inventory. The inventory layers are created within an organization, item and cost group. The quantity and cost information is stored for the inventory layer.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_INV_LAYERS_U1 | UNIQUE | APPS_TS_TX_IDX | INV_LAYER_ID |
| CST_INV_LAYERS_U2 | UNIQUE | APPS_TS_TX_IDX |
LAYER_ID
INV_LAYER_ID |
| CST_INV_LAYERS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
LAYER_ID
TRANSACTION_SOURCE_TYPE_ID TRANSACTION_SOURCE_ID TRANSACTION_SOURCE |
| CST_INV_LAYERS_N2 | NONUNIQUE | APPS_TS_TX_IDX |
LAYER_ID
LAYER_QUANTITY |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LAYER_ID | NUMBER | Y | Layer identifier | |
| INV_LAYER_ID | NUMBER | Y | Inventory layer identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Item identifier | |
| CREATION_QUANTITY | NUMBER | Y | Inventory layer creation quantity | |
| LAYER_QUANTITY | NUMBER | Y | Current inventory layer quantity | |
| LAYER_COST | NUMBER | Y | Inventory layer cost | |
| CREATE_TRANSACTION_ID | NUMBER | Y | Transaction which created this layer | |
| TRANSACTION_ACTION_ID | NUMBER | Transaction action identifier | ||
| TRANSACTION_SOURCE_ID | NUMBER | Transaction source identifier | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Transaction source type identifier | ||
| TRANSACTION_SOURCE | VARCHAR2 | (240) | Transaction source number | |
| UNBURDENED_COST | NUMBER | Item unit cost minus this level material overhead | ||
| BURDEN_COST | NUMBER | This level material overhead | ||
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| REQUEST_ID | NUMBER | Standard who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard who column | ||
| PROGRAM_ID | NUMBER | Standard who column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard who column |
BOM.CST_INV_LAYERS does not reference any database object
BOM.CST_INV_LAYERS is referenced by following:
| Description: | Stores inventory layer cost details |
|---|
CST_INV_LAYER_COST_DETAILS is the child table of CST_INV_LAYERS. It stores the cost of the inventory layer elementally across levels.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_INV_LAYER_COST_DETAILS_U1 | UNIQUE | APPS_TS_TX_IDX |
INV_LAYER_ID
LAYER_ID COST_ELEMENT_ID LEVEL_TYPE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LAYER_ID | NUMBER | Y | Layer identifier | |
| INV_LAYER_ID | NUMBER | Y | Inventory layer identifier | |
| LEVEL_TYPE | NUMBER | Y | Level identifier | |
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| LAYER_COST | NUMBER | Y | Inventory layer cost | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| REQUEST_ID | NUMBER | Standard who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard who column | ||
| PROGRAM_ID | NUMBER | Standard who column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard who column |
BOM.CST_INV_LAYER_COST_DETAILS does not reference any database object
BOM.CST_INV_LAYER_COST_DETAILS is referenced by following:
| Description: | A temporary table to store intermediate results for period close summarization, standard cost update and inventory valuation reports |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| QTY_SOURCE | NUMBER | (3) | Y | Identifies the code module that has created the row |
| ORGANIZATION_ID | NUMBER | (15) | Y | Organization identifier |
| INVENTORY_ITEM_ID | NUMBER | (15) | Item identifier | |
| COST_GROUP_ID | NUMBER | (15) | Cost group identifier | |
| SUBINVENTORY_CODE | VARCHAR2 | (10) | Identifies the subinventory | |
| ACCOUNTED_VALUE | NUMBER | Value obtained from summing the accounting distributions | ||
| ROLLBACK_VALUE | NUMBER | Value obtained from the quantity and cost of transactions that are being rolled back | ||
| ROLLBACK_QTY | NUMBER | Quantity contributing to the inventory value | ||
| REVISION | VARCHAR2 | (3) | Item revision | |
| TXN_SOURCE_TYPE_ID | NUMBER | (15) | Identifies the source type of the transaction that we are rolling back | |
| CATEGORY_ID | NUMBER | (15) | Category identifier | |
| COST_TYPE_ID | NUMBER | (15) | The cost type against which the asset status of the item is checked | |
| FROM_ORGANIZATION_ID | NUMBER | (15) | Identifies the organization that the intransit quantity originated from | |
| TO_ORGANIZATION_ID | NUMBER | (15) | Identifies the organization that the intransit quantity is going to | |
| RCV_TRANSACTION_ID | NUMBER | (15) | Receiving Transaction Identifier | |
| SHIPMENT_LINE_ID | NUMBER | (15) | Shipment Line Identifier | |
| INTRANSIT_INV_ACCOUNT | NUMBER | (15) | The account that holds the intransit value |
BOM.CST_INV_QTY_TEMP does not reference any database object
BOM.CST_INV_QTY_TEMP is referenced by following:
| Description: | Item cost summary |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_ITEM_COSTS.COST_TYPE_ID | CST_COST_TYPES |
|
CST_ITEM_COSTS.INVENTORY_ITEM_ID
CST_ITEM_COSTS.ORGANIZATION_ID |
MTL_SYSTEM_ITEMS_B |
| CST_ITEM_COSTS.COST_UPDATE_ID | CST_COST_UPDATES |
| Foreign Key Column | Foreign Table |
|---|---|
|
CST_ITEM_COST_DETAILS.INVENTORY_ITEM_ID
CST_ITEM_COST_DETAILS.COST_TYPE_ID CST_ITEM_COST_DETAILS.ORGANIZATION_ID |
CST_ITEM_COSTS |
CST_ITEM_COSTS stores item cost control information by cost type.
.
For standard costing organizations, the item cost control information
for the Frozen cost type is created when you enter a new item. For
average cost organizations, item cost control information is created
when you transact the item for the first time.
.
You can use the Item Costs window to enter cost control
information.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ITEM_COSTS_U1 | UNIQUE | APPS_TS_TX_IDX |
INVENTORY_ITEM_ID
ORGANIZATION_ID COST_TYPE_ID |
| CST_ITEM_COSTS_N2 | NONUNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
COST_TYPE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| INVENTORY_ASSET_FLAG | NUMBER | Y | Flag indicating whether the item is asset or expense | |
| LOT_SIZE | NUMBER | Lot Size | ||
| BASED_ON_ROLLUP_FLAG | NUMBER | Flag indicating whether cost is to be rolled up | ||
| SHRINKAGE_RATE | NUMBER | Manufacturing shrinkage rate (for make item only) | ||
| DEFAULTED_FLAG | NUMBER | Y | Flag indicating whether the cost of the item is defaulted from the default cost type during cost rollup | |
| COST_UPDATE_ID | NUMBER | Cost update session identifier | ||
| PL_MATERIAL | NUMBER | Previous level material cost | ||
| PL_MATERIAL_OVERHEAD | NUMBER | Previous level material overhead cost | ||
| PL_RESOURCE | NUMBER | Previous level resource cost | ||
| PL_OUTSIDE_PROCESSING | NUMBER | Previous level outside processing cost | ||
| PL_OVERHEAD | NUMBER | Previous level overhead cost | ||
| TL_MATERIAL | NUMBER | This level material cost | ||
| TL_MATERIAL_OVERHEAD | NUMBER | This level material overhead cost | ||
| TL_RESOURCE | NUMBER | This level resource cost | ||
| TL_OUTSIDE_PROCESSING | NUMBER | This level outside processing cost | ||
| TL_OVERHEAD | NUMBER | This level overhead cost | ||
| MATERIAL_COST | NUMBER | Material cost | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material overhead cost | ||
| RESOURCE_COST | NUMBER | Resource cost | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside Processing cost | ||
| OVERHEAD_COST | NUMBER | Overhead cost | ||
| PL_ITEM_COST | NUMBER | Total previous level cost | ||
| TL_ITEM_COST | NUMBER | Total this level cost | ||
| ITEM_COST | NUMBER | Item unit cost | ||
| UNBURDENED_COST | NUMBER | Item unit cost minus this level material overhead | ||
| BURDEN_COST | NUMBER | This level material overhead | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ROLLUP_ID | NUMBER | (15) | Supply Chain Rollup identifier | |
| ASSIGNMENT_SET_ID | NUMBER | (15) | MRP assignment set identifier used in Supply Chain Rollup |
BOM.CST_ITEM_COSTS does not reference any database object
BOM.CST_ITEM_COSTS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_ITEM_COSTS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_ITEM_COSTS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_COST | NUMBER | Resource Cost | ||
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| PL_ITEM_COST | NUMBER | Previous Level Item Cost | ||
| PL_RESOURCE | NUMBER | Previous Level Resource | ||
| UNBURDENED_COST | NUMBER | Unburdened Cost | ||
| TL_ITEM_COST | NUMBER | This Level Item Cost | ||
| OVERHEAD_COST | NUMBER | Overhead Cost | ||
| COST_TYPE_ID | NUMBER | Y | Cost Type Identifier | |
| ITEM_COST | NUMBER | Item Cost | ||
| MATERIAL_COST | NUMBER | Material Cost | ||
| TL_RESOURCE | NUMBER | This Level Resource | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item Identifier | |
| PL_OVERHEAD | NUMBER | Previous Level Overhead | ||
| PL_MATERIAL | NUMBER | Previous Level Material | ||
| TL_OVERHEAD | NUMBER | This Level Overhead | ||
| TL_MATERIAL | NUMBER | This Level Material | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside Processing Cost | ||
| PL_OUTSIDE_PROCESSING | NUMBER | Previous Level Outside Processing | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material Overhead Cost | ||
| PL_MATERIAL_OVERHEAD | NUMBER | Previous Level Material Overhead | ||
| BURDEN_COST | NUMBER | Burden Cost | ||
| TL_OUTSIDE_PROCESSING | NUMBER | This Level Outside Processing | ||
| TL_MATERIAL_OVERHEAD | NUMBER | This Level Material Overhead | ||
| SET_OF_BOOKS_ID | NUMBER | Set of Books Identifier |
BOM.CST_ITEM_COSTS_EFC does not reference any database object
BOM.CST_ITEM_COSTS_EFC is referenced by following:
| Description: | Open interface table for item cost information |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
CST_ITEM_COSTS_INTERFACE.INVENTORY_ITEM_ID
CST_ITEM_COSTS_INTERFACE.ORGANIZATION_ID |
MTL_SYSTEM_ITEMS_B |
| CST_ITEM_COSTS_INTERFACE.COST_TYPE_ID | CST_COST_TYPES |
| CST_ITEM_COSTS_INTERFACE.COST_UPDATE_ID | CST_COST_UPDATES |
This table is used to hold the item cost information that needs to be imported.
Scope: public
Product: BOM
Lifecycle: active
Display Name: Item Cost Interface
Category: BUSINESS_ENTITY CST_ITEM_COST
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ITEM_COSTS_INTERFACE_N1 | NONUNIQUE | APPS_TS_INTERFACE |
INVENTORY_ITEM_ID
COST_TYPE_ID ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| INVENTORY_ASSET_FLAG | NUMBER | Flag indicating whether the item is asset or expense | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| COST_TYPE | VARCHAR2 | (10) | Cost type name | |
| INVENTORY_ITEM | VARCHAR2 | (240) | Concatenated inventory item segments | |
| GROUP_ID | NUMBER | Group identifier | ||
| LOT_SIZE | NUMBER | Lot size | ||
| BASED_ON_ROLLUP_FLAG | NUMBER | Flag indicating whether costs should be rolled up | ||
| SHRINKAGE_RATE | NUMBER | Manufacturing shrinkage rate (for make item only) | ||
| DEFAULTED_FLAG | NUMBER | Flag indicating whether the cost of the item is defaulted from the default cost type during cost roll up | ||
| COST_UPDATE_ID | NUMBER | Cost update session identifier | ||
| PL_MATERIAL | NUMBER | Previous level material cost | ||
| PL_MATERIAL_OVERHEAD | NUMBER | Previous level material overhead cost | ||
| PL_RESOURCE | NUMBER | Previous level resource cost | ||
| PL_OUTSIDE_PROCESSING | NUMBER | Previous level outside processing cost | ||
| PL_OVERHEAD | NUMBER | Previous level overhead cost | ||
| TL_MATERIAL | NUMBER | This level material cost | ||
| TL_MATERIAL_OVERHEAD | NUMBER | This level material overhead cost | ||
| TL_RESOURCE | NUMBER | This level resource cost | ||
| TL_OUTSIDE_PROCESSING | NUMBER | This level outside processing cost | ||
| TL_OVERHEAD | NUMBER | This level overhead cost | ||
| MATERIAL_COST | NUMBER | Material cost | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material overhead cost | ||
| RESOURCE_COST | NUMBER | Resource cost | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside Processing cost | ||
| OVERHEAD_COST | NUMBER | Overhead cost | ||
| PL_ITEM_COST | NUMBER | Total previous level cost | ||
| TL_ITEM_COST | NUMBER | Total this level cost | ||
| ITEM_COST | NUMBER | Item unit cost | ||
| UNBURDENED_COST | NUMBER | Item unit cost minus this level material overhead | ||
| BURDEN_COST | NUMBER | This level material overhead | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| TRANSACTION_ID | NUMBER | Transaction identifier | ||
| PROCESS_FLAG | NUMBER | Not currently used | ||
| ITEM_NUMBER | VARCHAR2 | (81) | Not currently used | |
| TRANSACTION_TYPE | VARCHAR2 | (10) | Transaction type |
BOM.CST_ITEM_COSTS_INTERFACE does not reference any database object
BOM.CST_ITEM_COSTS_INTERFACE is referenced by following:
| Description: | A temporary table to snapshot new item costs during standard cost update |
|---|
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ITEM_COSTS_TEMP_U1 | UNIQUE | INVENTORY_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| INVENTORY_ASSET_FLAG | NUMBER | Y | ||
| LOT_SIZE | NUMBER | |||
| BASED_ON_ROLLUP_FLAG | NUMBER | |||
| SHRINKAGE_RATE | NUMBER | |||
| DEFAULTED_FLAG | NUMBER | Y | ||
| PL_MATERIAL | NUMBER | |||
| PL_MATERIAL_OVERHEAD | NUMBER | |||
| PL_RESOURCE | NUMBER | |||
| PL_OUTSIDE_PROCESSING | NUMBER | |||
| PL_OVERHEAD | NUMBER | |||
| TL_OVERHEAD | NUMBER | |||
| TL_MATERIAL | NUMBER | |||
| TL_MATERIAL_OVERHEAD | NUMBER | |||
| TL_RESOURCE | NUMBER | |||
| TL_OUTSIDE_PROCESSING | NUMBER | |||
| MATERIAL_COST | NUMBER | |||
| MATERIAL_OVERHEAD_COST | NUMBER | |||
| RESOURCE_COST | NUMBER | |||
| OUTSIDE_PROCESSING_COST | NUMBER | |||
| OVERHEAD_COST | NUMBER | |||
| COST_UPDATE_ID | NUMBER | |||
| PL_ITEM_COST | NUMBER | |||
| TL_ITEM_COST | NUMBER | |||
| UNBURDENED_COST | NUMBER | |||
| BURDEN_COST | NUMBER | |||
| ITEM_COST | NUMBER | |||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ATTRIBUTE15 | VARCHAR2 | (150) |
BOM.CST_ITEM_COSTS_TEMP does not reference any database object
BOM.CST_ITEM_COSTS_TEMP is referenced by following:
| Description: | Item cost detail information |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
CST_ITEM_COST_DETAILS.INVENTORY_ITEM_ID
CST_ITEM_COST_DETAILS.COST_TYPE_ID CST_ITEM_COST_DETAILS.ORGANIZATION_ID |
CST_ITEM_COSTS |
| CST_ITEM_COST_DETAILS.COST_TYPE_ID | CST_COST_TYPES |
|
CST_ITEM_COST_DETAILS.INVENTORY_ITEM_ID
CST_ITEM_COST_DETAILS.ORGANIZATION_ID |
MTL_SYSTEM_ITEMS_B |
| CST_ITEM_COST_DETAILS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| CST_ITEM_COST_DETAILS.DEPARTMENT_ID | BOM_DEPARTMENTS |
| CST_ITEM_COST_DETAILS.ACTIVITY_ID | CST_ACTIVITIES |
| CST_ITEM_COST_DETAILS.RESOURCE_ID | BOM_RESOURCES |
| CST_ITEM_COST_DETAILS.BASIS_RESOURCE_ID | BOM_RESOURCES |
| CST_ITEM_COST_DETAILS.OPERATION_SEQUENCE_ID | BOM_OPERATION_SEQUENCES |
CST_ITEM_COST_DETAILS stores detailed cost information for an item for
a cost type. It is the child table of CST_ITEM_COSTS.
.
There are three types of detailed item cost: User-defined, Defaulted,
and Rolled up. User-defined costs can be entered in the Item Costs
window. Defaulted and Rolled up costs are generated by Cost
Rollup.
.
If the item does not have cost control information for the cost type
you are rolling up, Cost Rollup copies this level detailed cost
information from the default cost type and marks the rows as
Defaulted. Previous level costs are rolled up costs.
.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ITEM_COST_DETAILS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
INVENTORY_ITEM_ID
ORGANIZATION_ID COST_TYPE_ID COST_ELEMENT_ID LEVEL_TYPE |
| CST_ITEM_COST_DETAILS_N2 | NONUNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
COST_TYPE_ID ROLLUP_SOURCE_TYPE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| OPERATION_SEQUENCE_ID | NUMBER | Operation sequence identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number in a routing | ||
| DEPARTMENT_ID | NUMBER | Department identifier | ||
| LEVEL_TYPE | NUMBER | Y | Level at which cost is incurred | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| RESOURCE_SEQ_NUM | NUMBER | Resource sequence number in an operation | ||
| RESOURCE_ID | NUMBER | Resource identifier (sub-element) | ||
| RESOURCE_RATE | NUMBER | Resource unit cost | ||
| ITEM_UNITS | NUMBER | Number of item units the activity cost is applied to | ||
| ACTIVITY_UNITS | NUMBER | Number of activity units applied to the item cost | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Number of resource units, overhead rate, or activity unit cost per basis | |
| BASIS_TYPE | NUMBER | Y | Basis | |
| BASIS_RESOURCE_ID | NUMBER | Resource identifier that the resource overhead is based on | ||
| BASIS_FACTOR | NUMBER | Y | Basis factor | |
| NET_YIELD_OR_SHRINKAGE_FACTOR | NUMBER | Y | Item shrinkage factor computed from the item shrinkage | |
| ITEM_COST | NUMBER | Y | Item unit cost | |
| COST_ELEMENT_ID | NUMBER | Cost element identifier | ||
| ROLLUP_SOURCE_TYPE | NUMBER | Y | Cost source | |
| ACTIVITY_CONTEXT | VARCHAR2 | (30) | Structure defining column for the Activity Unit Information | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| YIELDED_COST | NUMBER | The yield cost as computed by the rollup process for WSM enabled organizations | ||
| SOURCE_ORGANIZATION_ID | NUMBER | (15) | Source organization identifier | |
| VENDOR_ID | NUMBER | (15) | Vendor identifier | |
| ALLOCATION_PERCENT | NUMBER | Allocation percentage | ||
| VENDOR_SITE_ID | NUMBER | (15) | Vendor site identifier | |
| SHIP_METHOD | VARCHAR2 | (30) | Shipping method |
BOM.CST_ITEM_COST_DETAILS does not reference any database object
BOM.CST_ITEM_COST_DETAILS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_ITEM_COST_DETAILS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_ITEM_COST_DETAILS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| YIELDED_COST | NUMBER | Yielded Cost | ||
| BASIS_FACTOR | NUMBER | Y | Basis Factor | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item Identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Usage Rate Or Amount | |
| RESOURCE_RATE | NUMBER | Resource Rate | ||
| COST_TYPE_ID | NUMBER | Y | Cost Type Identifier | |
| ITEM_COST | NUMBER | Y | Item Cost | |
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.CST_ITEM_COST_DETAILS_EFC does not reference any database object
BOM.CST_ITEM_COST_DETAILS_EFC is referenced by following:
| Description: | Open interface table for item cost detail information |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_ITEM_CST_DTLS_INTERFACE.COST_TYPE_ID | CST_COST_TYPES |
|
CST_ITEM_CST_DTLS_INTERFACE.INVENTORY_ITEM_ID
CST_ITEM_CST_DTLS_INTERFACE.ORGANIZATION_ID |
MTL_SYSTEM_ITEMS_B |
| CST_ITEM_CST_DTLS_INTERFACE.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| CST_ITEM_CST_DTLS_INTERFACE.DEPARTMENT_ID | BOM_DEPARTMENTS |
| CST_ITEM_CST_DTLS_INTERFACE.ACTIVITY_ID | CST_ACTIVITIES |
| CST_ITEM_CST_DTLS_INTERFACE.RESOURCE_ID | BOM_RESOURCES |
| CST_ITEM_CST_DTLS_INTERFACE.BASIS_RESOURCE_ID | BOM_RESOURCES |
| CST_ITEM_CST_DTLS_INTERFACE.OPERATION_SEQUENCE_ID | BOM_OPERATION_SEQUENCES |
This table is used to hold the item cost detail information that needs to be
imported.
Scope: public
Product: BOM
Lifecycle: active
Display Name: Item Cost Detail Interface
Category: BUSINESS_ENTITY CST_ITEM_COST
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ITEM_CST_DTLS_INTERFACE_N1 | NONUNIQUE | APPS_TS_INTERFACE |
INVENTORY_ITEM_ID
ORGANIZATION_ID COST_TYPE_ID COST_ELEMENT_ID |
| CST_ITEM_CST_DTLS_INTERFACE_N2 | NONUNIQUE | APPS_TS_INTERFACE | GROUP_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier | ||
| COST_TYPE_ID | NUMBER | Cost type identifier | ||
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| GROUP_ID | NUMBER | Group identifier | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| OPERATION_SEQUENCE_ID | NUMBER | Operation sequence identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number in a routing | ||
| DEPARTMENT_ID | NUMBER | Department identifier | ||
| LEVEL_TYPE | NUMBER | Level at which cost is incurred | ||
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| RESOURCE_SEQ_NUM | NUMBER | Resource sequence number in an operation | ||
| RESOURCE_ID | NUMBER | Resource identifier (sub-element) | ||
| RESOURCE_RATE | NUMBER | Resource unit cost | ||
| ITEM_UNITS | NUMBER | Number of item units the activity cost is applied to | ||
| ACTIVITY_UNITS | NUMBER | Number of activity units applied to the item cost | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Number of resource units, overhead rate, or activity unit cost per basis | ||
| BASIS_TYPE | NUMBER | Basis | ||
| BASIS_RESOURCE_ID | NUMBER | Resource identifier that the resource overhead is based on | ||
| BASIS_FACTOR | NUMBER | Basis factor | ||
| NET_YIELD_OR_SHRINKAGE_FACTOR | NUMBER | Item shrinkage factor computed from the item shrinkage | ||
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | NUMBER | Cost element identifier | ||
| ROLLUP_SOURCE_TYPE | NUMBER | Cost source | ||
| ACTIVITY_CONTEXT | VARCHAR2 | (30) | Structure defining column for the Activity Unit Information | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| COST_TYPE | VARCHAR2 | (10) | Cost type name | |
| INVENTORY_ITEM | VARCHAR2 | (240) | Concatenated inventory item segments | |
| DEPARTMENT | VARCHAR2 | (10) | Department name | |
| ACTIVITY | VARCHAR2 | (10) | Activity name | |
| RESOURCE_CODE | VARCHAR2 | (10) | Resource code | |
| BASIS_RESOURCE_CODE | VARCHAR2 | (10) | Resource code of resource on which an overhead is based | |
| COST_ELEMENT | VARCHAR2 | (50) | Cost element name | |
| ERROR_TYPE | NUMBER | Type of error | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| TRANSACTION_ID | NUMBER | Transaction identifier | ||
| PROCESS_FLAG | NUMBER | Not currently used | ||
| ITEM_NUMBER | VARCHAR2 | (81) | Not currently used | |
| TRANSACTION_TYPE | VARCHAR2 | (10) | Transaction type | |
| YIELDED_COST | NUMBER | The yield cost, applicable for WSM enabled organizations | ||
| ERROR_CODE | VARCHAR2 | (240) | Error code | |
| ERROR_EXPLANATION | VARCHAR2 | (240) | Error explanation | |
| LOT_SIZE | NUMBER | Lot size | ||
| BASED_ON_ROLLUP_FLAG | NUMBER | Based on Rollup flag | ||
| SHRINKAGE_RATE | NUMBER | Shrinkage rate | ||
| INVENTORY_ASSET_FLAG | NUMBER | Inventory asset flag | ||
| ERROR_FLAG | VARCHAR2 | (1) | Error flag | |
| GROUP_DESCRIPTION | VARCHAR2 | (80) | Group ID description |
BOM.CST_ITEM_CST_DTLS_INTERFACE does not reference any database object
BOM.CST_ITEM_CST_DTLS_INTERFACE is referenced by following:
| Description: | Temporary list of items for use in cost reporting |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Item identifier from mtl_system_items | ||
| CATEGORY_ID | NUMBER | Category identifier from mtl_categories | ||
| COST_TYPE_ID | NUMBER | Cost type identifier from cst_cost_types |
BOM.CST_ITEM_LIST_TEMP does not reference any database object
BOM.CST_ITEM_LIST_TEMP is referenced by following:
| Description: | Default value for the overhead cost |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_ITEM_OVERHEAD_DEFAULTS.MATERIAL_OVERHEAD_ID | BOM_RESOURCES |
| CST_ITEM_OVERHEAD_DEFAULTS.CATEGORY_ID | MTL_CATEGORIES_B |
CST_ITEM_OVERHEAD_DEFAULTS holds default material overhead rates for buy, make or all items. You can define default material overhead rates by organization or by item category. These defaults are used when you define your items.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ITEM_OVERHEAD_DEFAULTS_U1 | UNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
ITEM_TYPE CATEGORY_ID MATERIAL_OVERHEAD_ID ACTIVITY_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| CATEGORY_SET_ID | NUMBER | Category set identifier | ||
| CATEGORY_ID | NUMBER | Category identifier | ||
| MATERIAL_OVERHEAD_ID | NUMBER | Material overhead sub element identifier | ||
| ITEM_TYPE | NUMBER | Type of item that the material overhead applies | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| BASIS_TYPE | NUMBER | Basis | ||
| ITEM_UNITS | NUMBER | Number of item units the activity cost is applied to | ||
| ACTIVITY_UNITS | NUMBER | Number of activity units applied to the item cost | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Number of resource units, overhead rate, or activity unit cost per basis | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| ACTIVITY_CONTEXT | VARCHAR2 | (30) | Structure defining column for the Activity Unit Information | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_ITEM_OVERHEAD_DEFAULTS does not reference any database object
BOM.CST_ITEM_OVERHEAD_DEFAULTS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_ITEM_OVERHEAD_DEFAULTS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_ITEM_OVERHEAD_DEFAULTS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_TYPE | NUMBER | Item Type | ||
| MATERIAL_OVERHEAD_ID | NUMBER | Material Overhead Identifier | ||
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| CATEGORY_ID | NUMBER | Category Identifier | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Usage Rate Or Amount | |
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.CST_ITEM_OVERHEAD_DEFAULTS_EFC does not reference any database object
BOM.CST_ITEM_OVERHEAD_DEFAULTS_EFC is referenced by following:
| Description: | Detailed cost information by element and level |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_LAYER_COST_DETAILS.LAYER_ID | CST_QUANTITY_LAYERS |
| CST_LAYER_COST_DETAILS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
CST_LAYER_COST_DETAILS stores detailed cost information by
element and level. It is a child table of CST_QUANTITY_LAYERS.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_LAYER_COST_DETAILS_U1 | UNIQUE | APPS_TS_TX_IDX |
LAYER_ID
COST_ELEMENT_ID LEVEL_TYPE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LAYER_ID | NUMBER | Y | Layer identifier | |
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| LEVEL_TYPE | NUMBER | Y | Level identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who column | ||
| PROGRAM_ID | NUMBER | Standard Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who column | ||
| ITEM_COST | NUMBER | Y | Item Cost |
BOM.CST_LAYER_COST_DETAILS does not reference any database object
BOM.CST_LAYER_COST_DETAILS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_LAYER_COST_DETAILS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_LAYER_COST_DETAILS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEVEL_TYPE | NUMBER | Y | Level Type | |
| LAYER_ID | NUMBER | Y | Layer Id | |
| COST_ELEMENT_ID | NUMBER | Y | Cost Element Id | |
| ITEM_COST | NUMBER | Y | Item Cost | |
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.CST_LAYER_COST_DETAILS_EFC does not reference any database object
BOM.CST_LAYER_COST_DETAILS_EFC is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LCM_TRANSACTION_ID | NUMBER | |||
| RCV_TRANSACTION_ID | NUMBER | |||
| TRANSACTION_ID | NUMBER | |||
| COST_GROUP_ID | NUMBER | |||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| ACCOUNT | NUMBER | |||
| ACCOUNTING_LINE_TYPE_ID | NUMBER | |||
| ACCOUNTING_LINE_TYPE | VARCHAR2 | (30) | ||
| DEBIT_CREDIT_FLAG | NUMBER | |||
| EXP_FLAG | NUMBER |
BOM.CST_LC_ACCOUNTS_GT does not reference any database object
BOM.CST_LC_ACCOUNTS_GT is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LCM_TRANSACTION_ID | NUMBER | |||
| RCV_TRANSACTION_ID | NUMBER | |||
| INVENTORY_ITEM_ID | NUMBER | |||
| PRIOR_LANDED_COST | NUMBER | |||
| NEW_LANDED_COST | NUMBER | |||
| TRANSACTION_DATE | DATE | |||
| ACCOUNTING_DATE | DATE | |||
| PO_NUMBER | VARCHAR2 | (20) | ||
| PO_HEADER_ID | NUMBER | |||
| PO_RELEASE_ID | NUMBER | |||
| PO_LINE_ID | NUMBER | |||
| PO_LINE_LOCATION_ID | NUMBER | |||
| SOURCE_DOC_UNIT_OF_MEASURE | VARCHAR2 | (25) | ||
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (25) | ||
| LCM_ACCOUNT | NUMBER | |||
| LCM_VAR_ACCOUNT | NUMBER | |||
| RECEIVING_ACCOUNT | NUMBER | |||
| PURCHASE_PRICE_VAR_ACCOUNT | NUMBER | |||
| ORG_EXPENSE_ACCOUNT | NUMBER | |||
| ORGANIZATION_ID | NUMBER | |||
| LEGAL_ENTITY_ID | NUMBER | |||
| LEDGER_ID | NUMBER | |||
| OPERATING_UNIT | NUMBER | |||
| CHART_OF_ACCOUNTS_ID | NUMBER | |||
| FUNC_CURRENCY_CODE | VARCHAR2 | (15) | ||
| FUNC_MINIMUM_ACCOUNTABLE_UNIT | NUMBER | |||
| FUNC_PRECISION | NUMBER | |||
| PERIOD_NAME | VARCHAR2 | (15) | ||
| ACCT_PERIOD_ID | NUMBER | |||
| INVENTORY_ASSET_FLAG | VARCHAR2 | (1) |
BOM.CST_LC_ADJ_ACCTG_INFO_GT does not reference any database object
BOM.CST_LC_ADJ_ACCTG_INFO_GT is referenced by following:
| Description: | Interface table for landed cost adjustment transactions for LCM shipments |
|---|
The CST_LCM_ADJ_INTERFACE table is an interface table that is populated every time the landed cost of an LCM shipment is recalculated. The interface transaction is created for the corresponding parent receipt transaction (rcv_transaction_id) and the previous and the new landed cost. The transaction_date is the date of the recalculation of the landed cost.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_LC_ADJ_INTERFACE_N1 | NONUNIQUE | APPS_TS_TX_IDX |
GROUP_ID
ORGANIZATION_ID PROCESS_STATUS |
| CST_LC_ADJ_INTERFACE_N2 | NONUNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
PROCESS_STATUS PROCESS_PHASE |
| CST_LC_ADJ_INTERFACE_N3 | NONUNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
TRANSACTION_DATE |
| CST_LC_ADJ_INTERFACE_N4 | NONUNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
INVENTORY_ITEM_ID TRANSACTION_DATE |
| CST_LC_ADJ_INTERFACE_N5 | NONUNIQUE | APPS_TS_TX_IDX |
RCV_TRANSACTION_ID
TRANSACTION_DATE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | Unique landed cost transaction identifier | ||
| RCV_TRANSACTION_ID | NUMBER | Y | Parent receipt transaction for LCM shipment | |
| ORGANIZATION_ID | NUMBER | Y | Destination inventory organization id | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item identifier | |
| TRANSACTION_DATE | DATE | Y | Landed cost adjustment transaction date | |
| PRIOR_LANDED_COST | NUMBER | Y | Prior landed cost | |
| NEW_LANDED_COST | NUMBER | Y | New landed cost | |
| PROCESS_STATUS | NUMBER | Y | Process phase: 1-Pending, 2-Running | |
| PROCESS_PHASE | NUMBER | Y | Process status: 1-Pending, 2-Validated, 3-Errored | |
| GROUP_ID | NUMBER | Landed cost adjustment processor group id | ||
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_LC_ADJ_INTERFACE does not reference any database object
BOM.CST_LC_ADJ_INTERFACE is referenced by following:
| Description: | Validation errors encountered during landed cost adjustment processing |
|---|
CST_LC_ADJ_INTERFACE_ERRORS is the child table of table CST_LC_ADJ_INTERFACE. It contains details of the failed validation of the data in CST_LC_ADJ_INTERFACE. The information is stored against each landed cost adjustment transaction (transaction_id), by column name (error_column) and the error itself (error_message).
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_LC_ADJ_INTERFACE_ERRORS_N1 | NONUNIQUE | APPS_TS_TX_IDX | TRANSACTION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | Landed cost adjustment unique transaction identifier | ||
| GROUP_ID | NUMBER | Y | Landed cost adjustment processor group id | |
| ERROR_COLUMN | VARCHAR2 | (30) | Column in the interface table that has invalid value | |
| ERROR_MESSAGE | VARCHAR2 | (240) | Description of the validation that failed for the column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_LC_ADJ_INTERFACE_ERRORS does not reference any database object
BOM.CST_LC_ADJ_INTERFACE_ERRORS is referenced by following:
| Description: | Table that stores historical landed cost adjustment transactions for LCM shipments |
|---|
CST_LC_ADJ_TRANSACTIONS stores the landed cost adjustment transactions. These transactions are created every time the landed cost of an LCM shipment is recalculated. The transaction is created for the corresponding parent receipt transaction (rcv_transaction_id) and the previous and the new landed cost. The transaction_date is the date of the recalculation of the landed cost.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_LC_ADJ_TRANSACTIONS_U1 | UNIQUE | APPS_TS_TX_IDX | TRANSACTION_ID |
| CST_LC_ADJ_TRANSACTIONS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
RCV_TRANSACTION_ID
TRANSACTION_DATE ORGANIZATION_ID |
| CST_LC_ADJ_TRANSACTIONS_N2 | NONUNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
TRANSACTION_DATE CREATION_DATE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | Y | Landed cost adjustment unique transaction identifier | |
| RCV_TRANSACTION_ID | NUMBER | Y | Parent receipt transaction for LCM shipment | |
| ORGANIZATION_ID | NUMBER | Y | Destination inventory organization id | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item identifier | |
| TRANSACTION_DATE | DATE | Y | Landed cost adjustment transaction date | |
| PRIOR_LANDED_COST | NUMBER | Y | Prior landed cost | |
| NEW_LANDED_COST | NUMBER | Y | New landed cost | |
| GROUP_ID | NUMBER | Y | Landed cost adjustment processor group id | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_LC_ADJ_TRANSACTIONS does not reference any database object
BOM.CST_LC_ADJ_TRANSACTIONS is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LCM_TRANSACTION_ID | NUMBER | |||
| TRANSACTION_ID | NUMBER | |||
| TRANSACTION_TYPE_ID | NUMBER | |||
| TRANSACTION_ACTION_ID | NUMBER | |||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | |||
| TRANSACTION_SOURCE_ID | NUMBER | |||
| COST_GROUP_ID | NUMBER | |||
| PRIMARY_QUANTITY | NUMBER | |||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | |||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | |||
| LAST_UPDATE_LOGIN | NUMBER | |||
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE | |||
| INVENTORY_ITEM_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | |||
| TRANSACTION_DATE | DATE | |||
| ACCT_PERIOD_ID | NUMBER | |||
| TRANSACTION_SOURCE_NAME | VARCHAR2 | (30) | ||
| SOURCE_CODE | VARCHAR2 | (30) | ||
| TRX_SOURCE_LINE_ID | NUMBER | |||
| MATERIAL_ACCOUNT | NUMBER | |||
| MATERIAL_OVERHEAD_ACCOUNT | NUMBER | |||
| RESOURCE_ACCOUNT | NUMBER | |||
| OUTSIDE_PROCESSING_ACCOUNT | NUMBER | |||
| OVERHEAD_ACCOUNT | NUMBER | |||
| EXPENSE_ACCOUNT_ID | NUMBER | |||
| COSTED_FLAG | VARCHAR2 | (1) | ||
| PM_COST_COLLECTED | VARCHAR2 | (1) | ||
| OWNING_ORGANIZATION_ID | NUMBER | |||
| OWNING_TP_TYPE | NUMBER | |||
| TRANSACTION_UOM | VARCHAR2 | (3) | ||
| TRANSACTION_REFERENCE | VARCHAR2 | (240) | ||
| VALUE_CHANGE | NUMBER |
BOM.CST_LC_MMT_GT does not reference any database object
BOM.CST_LC_MMT_GT is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LCM_TRANSACTION_ID | NUMBER | |||
| ACCOUNTING_EVENT_ID | NUMBER | |||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | |||
| LAST_UPDATE_LOGIN | NUMBER | |||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | |||
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE | |||
| RCV_TRANSACTION_ID | NUMBER | |||
| EVENT_TYPE_ID | NUMBER | |||
| EVENT_SOURCE | VARCHAR2 | (25) | ||
| EVENT_SOURCE_ID | NUMBER | |||
| SET_OF_BOOKS_ID | NUMBER | |||
| ORG_ID | NUMBER | |||
| TRANSFER_ORG_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | |||
| TRANSFER_ORGANIZATION_ID | NUMBER | |||
| DEBIT_ACCOUNT_ID | NUMBER | |||
| CREDIT_ACCOUNT_ID | NUMBER | |||
| DEBIT_ACCOUNTING_LINE_TYPE | VARCHAR2 | (30) | ||
| CREDIT_ACCOUNTING_LINE_TYPE | VARCHAR2 | (30) | ||
| TRANSACTION_DATE | DATE | |||
| TRANSACTION_QUANTITY | NUMBER | |||
| TRANSACTION_UNIT_OF_MEASURE | VARCHAR2 | (25) | ||
| SOURCE_DOC_QUANTITY | NUMBER | |||
| SOURCE_DOC_UNIT_OF_MEASURE | VARCHAR2 | (25) | ||
| PRIMARY_QUANTITY | NUMBER | |||
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (25) | ||
| INVENTORY_ITEM_ID | NUMBER | |||
| PO_HEADER_ID | NUMBER | |||
| PO_RELEASE_ID | NUMBER | |||
| PO_LINE_ID | NUMBER | |||
| PO_LINE_LOCATION_ID | NUMBER | |||
| PO_DISTRIBUTION_ID | NUMBER | |||
| INTERCOMPANY_PRICING_OPTION | NUMBER | |||
| UNIT_PRICE | NUMBER | |||
| TRANSACTION_AMOUNT | NUMBER | |||
| PRIOR_UNIT_PRICE | NUMBER | |||
| NR_TAX | NUMBER | |||
| REC_TAX | NUMBER | |||
| NR_TAX_AMOUNT | NUMBER | |||
| REC_TAX_AMOUNT | NUMBER | |||
| PRIOR_NR_TAX | NUMBER | |||
| PRIOR_REC_TAX | NUMBER | |||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| CURRENCY_CONVERSION_DATE | DATE | |||
| ACCOUNTED_FLAG | VARCHAR2 | (1) | ||
| PROCUREMENT_ORG_FLAG | VARCHAR2 | (1) | ||
| CROSS_OU_FLAG | VARCHAR2 | (1) | ||
| TRX_FLOW_HEADER_ID | NUMBER | |||
| INVOICED_FLAG | VARCHAR2 | (1) | ||
| PA_ADDITION_FLAG | VARCHAR2 | (1) | ||
| USSGL_TRANSACTION_CODE | VARCHAR2 | (32) | ||
| GL_GROUP_ID | NUMBER | |||
| QUANTITY_RECEIVED | NUMBER | |||
| QUANTITY_INVOICED | NUMBER | |||
| AMOUNT_RECEIVED | NUMBER | |||
| AMOUNT_INVOICED | NUMBER | |||
| LCM_ACCOUNT_ID | NUMBER | |||
| UNIT_LANDED_COST | NUMBER |
BOM.CST_LC_RAE_EVENTS_GT does not reference any database object
BOM.CST_LC_RAE_EVENTS_GT is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LCM_TRANSACTION_ID | NUMBER | |||
| RCV_TRANSACTION_ID | NUMBER | |||
| GROUP_ID | NUMBER | |||
| PARENT_TRANSACTION_ID | NUMBER | |||
| ACCOUNTING_EVENT_ID | NUMBER | |||
| PO_DISTRIBUTION_ID | NUMBER | |||
| SOURCE_DOC_QUANTITY | NUMBER | |||
| PRIMARY_QUANTITY | NUMBER | |||
| TRANSACTION_TYPE | VARCHAR2 | (25) | ||
| PARENT_TRANSACTION_TYPE | VARCHAR2 | (25) | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) |
BOM.CST_LC_RCV_TXN_GT does not reference any database object
BOM.CST_LC_RCV_TXN_GT is referenced by following:
| Description: | Holds information about the legal entity/cost |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_LE_COST_TYPES.LEGAL_ENTITY | HR_ALL_ORGANIZATION_UNITS |
| CST_LE_COST_TYPES.COST_TYPE_ID | CST_COST_TYPES |
| CST_LE_COST_TYPES.PAC_RATES_COST_TYPE_ID | CST_COST_TYPES |
| CST_LE_COST_TYPES.SET_OF_BOOKS_ID | GL_SETS_OF_BOOKS_11I |
| CST_LE_COST_TYPES.ACCOUNTING_LIBRARY_ID | CST_ACCOUNTING_LIBRARIES |
The CST_LE_COST_TYPES table holds information about the legal entity/cost type associations.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_LE_COST_TYPES_U1 | UNIQUE | APPS_TS_TX_IDX |
LEGAL_ENTITY
COST_TYPE_ID |
| CST_LE_COST_TYPES_N1 | NONUNIQUE | APPS_TS_TX_IDX | CREATE_ACCT_ENTRIES |
| CST_LE_COST_TYPES_N2 | NONUNIQUE | APPS_TS_TX_IDX | POST_TO_GL |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY | NUMBER | (15) | Y | The organization_id of the legal entity |
| COST_TYPE_ID | NUMBER | Y | The identifier of the cost type that will be associated with the legal entity. | |
| SET_OF_BOOKS_ID | NUMBER | (15) | Y | Set of Books identifier |
| PRIMARY_COST_METHOD | NUMBER | Y | Primary cost method obtained from lookups | |
| PAC_RATES_COST_TYPE_ID | NUMBER | Y | Cost type identifier that will serve as rates | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| REQUEST_ID | NUMBER | Extended Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Extended Who column | ||
| PROGRAM_ID | NUMBER | Extended Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Extended Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| CREATE_ACCT_ENTRIES | VARCHAR2 | (1) | Option that allows the user to create accounting entries for periodic costing | |
| ACCOUNTING_LIBRARY_ID | NUMBER | Identifier of the accounting library that is to be used to create accounting distributions for the Legal Entity,Cost Type combination | ||
| POST_TO_GL | VARCHAR2 | (1) | Option that allows the user to post accounting entries to General Ledger | |
| GL_TRANSFER_ALLOW_OVERRIDE | VARCHAR2 | (1) | Option that allows the user to change the default values for program parameters when transfer to General Ledger process is submitted | |
| GL_TRANSFER_MODE | VARCHAR2 | (1) | General Ledger Interface Transfer Summary Level | |
| GL_TRANSFER_SUBMIT_JOURNAL_IMP | VARCHAR2 | (1) | Option for submitting Journal Import to Oracle General Ledger at the same time as the transfer to General Ledger process | |
| RESTRICT_DOC_FLAG | NUMBER | Determines if the Documents (Invoices and RTVs) are to be restricted by the Process upto date when the acquisition cost is calculated | ||
| TRANSFER_COST_FLAG | VARCHAR2 | (1) | Column used to identify legal entity/cost type for interorg transfer | |
| ITERATION_PROC_FLAG | VARCHAR2 | (1) | iteration process as an option in Periodic Absorption Cost Processor | |
| MATERIAL_RELIEF_ALGORITHM | NUMBER | Y | Algorithm used for relieving material value |
BOM.CST_LE_COST_TYPES does not reference any database object
BOM.CST_LE_COST_TYPES is referenced by following:
| Description: | Item list for item exploder |
|---|
CST_LISTS holds lists of items that the item list exploder generates
for use by concurrent programs CMCCOC, CMCICU, CMCMEC, and CMRICU.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_LISTS_U1 | UNIQUE | APPS_TS_NOLOGGING |
LIST_ID
ENTITY_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LIST_ID | NUMBER | Y | List identifier | |
| ENTITY_ID | NUMBER | Y | Generic entity identifier |
BOM.CST_LISTS does not reference any database object
BOM.CST_LISTS is referenced by following:
| Description: | Temporary table for cost rollup |
|---|
CST_LOW_LEVEL_CODES is a temporary table. The low level codes for the
items are inserted into this table during a Cost
Rollup.
.
Notes:
- BOMPEXPL populates CST_LOW_LEVEL_CODES
- CSTPUCRU obtains the low level codes for the items being rolled up
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_LOW_LEVEL_CODES_N1 | NONUNIQUE | APPS_TS_TX_IDX |
ROLLUP_ID
INVENTORY_ITEM_ID |
| CST_LOW_LEVEL_CODES_N2 | NONUNIQUE | APPS_TS_TX_IDX |
ROLLUP_ID
LOW_LEVEL_CODE INVENTORY_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROLLUP_ID | NUMBER | Y | Rollup identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| LOW_LEVEL_CODE | NUMBER | Y | Lowest bill level at which this item exists for this rollup | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_LOW_LEVEL_CODES does not reference any database object
BOM.CST_LOW_LEVEL_CODES is referenced by following:
| Description: | Stores margin analysis load run parameters |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_MARGIN_BUILD.HEADER_ID | SO_HEADERS_ALL |
| CST_MARGIN_BUILD.COST_TYPE_ID | CST_COST_TYPES |
| CST_MARGIN_BUILD.ORGANIZATION_ID | MTL_PARAMETERS |
CST_MARGIN_BUILD stores the build information that is required to run
Margin Analysis Reports. Submitting a Margin Analysis Load Run
request populates this table. Submitting a Purge Margin Analysis Load
Run request removes records from it.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_MARGIN_BUILD_U1 | UNIQUE | APPS_TS_TX_IDX | BUILD_ID |
| CST_MARGIN_BUILD_U2 | UNIQUE | APPS_TS_TX_IDX | BUILD_NAME |
| CST_MARGIN_BUILD_N1 | NONUNIQUE | APPS_TS_TX_IDX | LEGAL_ENTITY_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY_NAME | VARCHAR2 | (240) | Legal Entity name | |
| BUILD_ID | NUMBER | Y | Build identifier | |
| BUILD_NAME | VARCHAR2 | (60) | Y | Build name |
| LEGAL_ENTITY_ID | NUMBER | Legal Entity identifier | ||
| BUILD_DESCRIPTION | VARCHAR2 | (255) | Description of the build | |
| FROM_DATE | DATE | Build date from value | ||
| TO_DATE | DATE | Build date to value | ||
| ORG_ID | NUMBER | Operating unit | ||
| HEADER_ID | NUMBER | Header identifier for the sales order | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Cost type identifier | ||
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_MARGIN_BUILD does not reference any database object
BOM.CST_MARGIN_BUILD is referenced by following:
| Description: | Margin analysis summary table for reporting purposes |
|---|
CST_MARGIN_TEMP temporarily stores the detailed information that is
used to build Margin Analysis Reports. Like CST_MARGIN_BUILD, Margin
Analysis Load Run and Purge Margin Analysis Load Run requests populate
and remove records from this table.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_MARGIN_SUMMARY_N1 | NONUNIQUE | APPS_TS_SUMMARY |
SOURCE
LEGAL_ENTITY_ID ORDER_NUMBER |
| CST_MARGIN_SUMMARY_N2 | NONUNIQUE | APPS_TS_SUMMARY |
BUILD_ID
ORG_ID SOURCE ROW_TYPE LINK_TO_LINE_ID |
| CST_MARGIN_SUMMARY_N3 | NONUNIQUE | APPS_TS_SUMMARY |
RMA_HEADER_ID
RMA_LINE_ID BUILD_ID ORG_ID SOURCE |
| CST_MARGIN_SUMMARY_N4 | NONUNIQUE | APPS_TS_SUMMARY |
GL_DATE
LEGAL_ENTITY_ID |
| CST_MARGIN_SUMMARY_N5 | NONUNIQUE | APPS_TS_SUMMARY |
ORG_ID
SOURCE HEADER_ID LINE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY_ID | NUMBER | Legal Entity Identifier | ||
| BUILD_ID | NUMBER | Y | Build identifier | |
| SOURCE | VARCHAR2 | (15) | Y | Identifies source of the record |
| ROW_TYPE | NUMBER | Y | Identifies the type of a sales order line | |
| ORIGIN | NUMBER | Y | Identifies the origin of the record | |
| INVOICE_SOURCE | VARCHAR2 | (30) | Source of the invoice | |
| PARENT_ROWID | ROWID | (10) | Identifier of SO_ORDER_LINES | |
| ORDER_NUMBER | NUMBER | Order number of the sales order | ||
| ORG_ID | NUMBER | Operating unit | ||
| HEADER_ID | NUMBER | Order header identifier | ||
| ORDER_TYPE_ID | NUMBER | Order type identifier | ||
| CUSTOMER_ID | NUMBER | Customer identifier | ||
| SOLD_TO_CUSTOMER_NAME | VARCHAR2 | (50) | Customer name based on customer identifier | |
| PRIMARY_SALESREP_ID | NUMBER | Primary sales representative identifier | ||
| SALES_CHANNEL_CODE | VARCHAR2 | (30) | Sales channel code identifier | |
| PARENT_INVENTORY_ITEM_ID | NUMBER | Parent inventory item identifier in case of a non-standard item | ||
| PARENT_ORGANIZATION_ID | NUMBER | Organization identifier for the parent item | ||
| PARENT_LINE_ID | NUMBER | Line identifier for the parent line | ||
| PARENT_LINE_NUMBER | NUMBER | Line number for the parent line | ||
| PARENT_ITEM_TYPE_CODE | VARCHAR2 | (30) | Type identifier of the parent item, i.e. Standard, Model, Class, etc. | |
| PARENT_ATO_FLAG | VARCHAR2 | (1) | Flag indicating if the order line is for ATO | |
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier for the child line | ||
| ORGANIZATION_ID | NUMBER | Organization identifier for the child line | ||
| LINE_ID | NUMBER | Line identifier for the child line | ||
| LINE_TYPE_CODE | VARCHAR2 | (30) | Line type code for the child line | |
| LINE_NUMBER | NUMBER | Line number for the child line | ||
| SHIP_TO_SITE_USE_ID | NUMBER | Ship to site identifier | ||
| SHIP_TO_CUSTOMER_NAME | VARCHAR2 | (50) | Customer name based on SHIP_TO_SITE_USE_ID | |
| INVOICE_TO_SITE_USE_ID | NUMBER | Site identifier for the invoiced site information | ||
| BILL_TO_CUSTOMER_NAME | VARCHAR2 | (50) | Customer name based on the INVOICE_TO_SITE_USE_ID | |
| CUSTOMER_TRX_ID | NUMBER | Identifier for RA_CUSTOMER_TRX | ||
| CUSTOMER_TRX_LINE_ID | NUMBER | Identifier for RA_CUSTOMER_TRX_LINES | ||
| ORIGINAL_GL_DATE | DATE | Original General ledger Date | ||
| GL_DATE | DATE | General ledger date | ||
| INVOICE_LINE_QUANTITY | NUMBER | Quantity invoiced for entire order line | ||
| INVOICE_QUANTITY | NUMBER | Quantity invoiced for invoice line | ||
| ORDER_LINE_QUANTITY | NUMBER | Order quantity for order line | ||
| SHIP_QUANTITY | NUMBER | Actual shipment quantity | ||
| INVOICED_AMOUNT | NUMBER | Invoiced amount | ||
| COGS_AMOUNT | NUMBER | Cost of goods sold amount | ||
| SALES_ACCOUNT | NUMBER | Sales account identifier | ||
| COGS_ACCOUNT | NUMBER | Cost of goods sold identifier | ||
| TERRITORY_ID | NUMBER | Territory identifier | ||
| CUSTOMER_CLASS_CODE | VARCHAR2 | (30) | Industry identifier | |
| MARGIN | NUMBER | Margin | ||
| MARGIN_PCT | NUMBER | Margin percentage | ||
| RETURN_REFERENCE_TYPE_CODE | VARCHAR2 | (30) | Return reference type identifier for the RMA lines | |
| RETURN_REFERENCE_ID | NUMBER | Return reference identifier for the RMA lines | ||
| LINK_TO_LINE_ID | NUMBER | Parent line identifier if RETURN_REFERENCE_TYPE_CODE is populated | ||
| RMA_HEADER_ID | NUMBER | Header identifier for the RMA lines | ||
| RMA_NUMBER | NUMBER | Order number for the RMA lines | ||
| RMA_INVENTORY_ITEM_ID | NUMBER | Inventory item identifier for the RMA lines | ||
| RMA_LINE_ID | NUMBER | Line identifier for the RMA lines | ||
| RMA_LINE_NUMBER | NUMBER | Line number for the RMA lines | ||
| RMA_ORGANIZATION_ID | NUMBER | Organization identifier for the RMA lines | ||
| RMA_LINE_TYPE_CODE | VARCHAR2 | (30) | Line type code for the RMA lines | |
| RMA_SHIP_TO_SITE_USE_ID | NUMBER | Site identifier for the shipped site for the RMA lines | ||
| RMA_INVOICE_INVENTORY_ITEM_ID | NUMBER | Invoiced inventory item identifier for the RMA lines | ||
| CR_TRX_ID | NUMBER | Credit memo identifier in RA_CUSTOMER_TRX | ||
| CR_TRX_LINE_ID | NUMBER | Credit memo Identifier in RA_CUSTOMER_TRX_LINES | ||
| PERIOD_NAME_YEAR | VARCHAR2 | (15) | Year name from General Ledger Periods | |
| PERIOD_NUM_YEAR | NUMBER | Number identifier of Year in General Ledger Period | ||
| PERIOD_NAME_QTR | VARCHAR2 | (15) | Quarter name from General Ledger Periods | |
| PERIOD_NUM_QTR | NUMBER | Number identifier of Quarter in General Ledger Period | ||
| PERIOD_SEQ_QTR | NUMBER | Sequence of General Ledger Period Quarter | ||
| PERIOD_NAME_MONTH | VARCHAR2 | (15) | Month name from General Ledger Periods | |
| PERIOD_NUM_MONTH | NUMBER | Number identifier of Month in General Ledger Period | ||
| PERIOD_SEQ_MONTH | NUMBER | Sequence of General Ledger Period Month | ||
| OE_ITEM_CATEGORY_ID | NUMBER | Item Category Identifier based on the default category set of the OE functional area | ||
| AREA_CODE | VARCHAR2 | (30) | Identifier of Area level of the BIS geography dimension | |
| COUNTRY_CODE | VARCHAR2 | (2) | Identifier of Country level of the BIS geography dimension | |
| REGION_CODE | VARCHAR2 | (30) | Identifier of Region level of the BIS geography dimension | |
| AREA_NAME | VARCHAR2 | (80) | Name of Area level of the BIS geography dimension | |
| COUNTRY_NAME | VARCHAR2 | (80) | Name of Country level of the BIS geography dimension | |
| REGION_NAME | VARCHAR2 | (80) | Name of Region level of the BIS geography dimension | |
| OPERATING_UNIT_NAME | VARCHAR2 | (240) | Name of Operating Unit |
BOM.CST_MARGIN_SUMMARY does not reference any database object
BOM.CST_MARGIN_SUMMARY is referenced by following:
| Description: | Margin analysis summary table for reporting purposes |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_MARGIN_TEMP.HEADER_ID | SO_HEADERS_ALL |
| CST_MARGIN_TEMP.LINE_ID | SO_LINES_ALL |
| CST_MARGIN_TEMP.PARENT_LINE_ID | SO_LINES_ALL |
| CST_MARGIN_TEMP.CUSTOMER_TRX_ID | RA_CUSTOMER_TRX_ALL |
| CST_MARGIN_TEMP.CUSTOMER_TRX_LINE_ID | RA_CUSTOMER_TRX_LINES_ALL |
CST_MARGIN_TEMP temporarily stores the detailed information that is
used to build Margin Analysis Reports. Like CST_MARGIN_BUILD, Margin
Analysis Load Run and Purge Margin Analysis Load Run requests populate
and remove records from this table.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_MARGIN_TEMP_N1 | NONUNIQUE | APPS_TS_ARCHIVE |
BUILD_ID
HEADER_ID |
| CST_MARGIN_TEMP_N2 | NONUNIQUE | APPS_TS_ARCHIVE |
BUILD_ID
PARENT_INVENTORY_ITEM_ID |
| CST_MARGIN_TEMP_N3 | NONUNIQUE | APPS_TS_ARCHIVE | LEGAL_ENTITY_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY_ID | NUMBER | Legal Entity Identifier | ||
| BUILD_ID | NUMBER | Y | Build identifier | |
| SOURCE | VARCHAR2 | (15) | Y | Identifies source of the record |
| ROW_TYPE | NUMBER | Y | Identifies the type of a sales order line | |
| ORIGIN | NUMBER | Y | Identifies the origin of the record | |
| INVOICE_SOURCE | VARCHAR2 | (30) | Source of the invoice | |
| PARENT_ROWID | ROWID | (10) | Identifier of SO_ORDER_LINES | |
| ORDER_NUMBER | NUMBER | Order number of the sales order | ||
| ORG_ID | NUMBER | Operating unit | ||
| HEADER_ID | NUMBER | Order header identifier | ||
| ORDER_TYPE_ID | NUMBER | Order type identifier | ||
| CUSTOMER_ID | NUMBER | Customer identifier | ||
| SOLD_TO_CUSTOMER_NAME | VARCHAR2 | (50) | Customer name based on customer identifier | |
| PRIMARY_SALESREP_ID | NUMBER | Primary sales representative identifier | ||
| SALES_CHANNEL_CODE | VARCHAR2 | (30) | Sales channel code identifier | |
| PARENT_INVENTORY_ITEM_ID | NUMBER | Parent inventory item identifier in case of a non-standard item | ||
| PARENT_ORGANIZATION_ID | NUMBER | Organization identifier for the parent item | ||
| PARENT_LINE_ID | NUMBER | Line identifier for the parent line | ||
| PARENT_LINE_NUMBER | NUMBER | Line number for the parent line | ||
| PARENT_ITEM_TYPE_CODE | VARCHAR2 | (30) | Type identifier of the parent item, i.e. Standard, Model, Class, etc. | |
| PARENT_ATO_FLAG | VARCHAR2 | (1) | Flag indicating if the order line is for ATO | |
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier for the child line | ||
| ORGANIZATION_ID | NUMBER | Organization identifier for the child line | ||
| LINE_ID | NUMBER | Line identifier for the child line | ||
| LINE_TYPE_CODE | VARCHAR2 | (30) | Line type code for the child line | |
| LINE_NUMBER | NUMBER | Line number for the child line | ||
| SHIP_TO_SITE_USE_ID | NUMBER | Ship to site identifier | ||
| SHIP_TO_CUSTOMER_NAME | VARCHAR2 | (50) | Customer name based on SHIP_TO_SITE_USE_ID | |
| INVOICE_TO_SITE_USE_ID | NUMBER | Site identifier for the invoiced site information | ||
| BILL_TO_CUSTOMER_NAME | VARCHAR2 | (50) | Customer name based on the INVOICE_TO_SITE_USE_ID | |
| CUSTOMER_TRX_ID | NUMBER | Identifier for RA_CUSTOMER_TRX | ||
| CUSTOMER_TRX_LINE_ID | NUMBER | Identifier for RA_CUSTOMER_TRX_LINES | ||
| ORIGINAL_GL_DATE | DATE | Original General ledger Date | ||
| GL_DATE | DATE | General ledger date | ||
| INVOICE_LINE_QUANTITY | NUMBER | Quantity invoiced for entire order line | ||
| INVOICE_QUANTITY | NUMBER | Quantity invoiced for invoice line | ||
| ORDER_LINE_QUANTITY | NUMBER | Order quantity for order line | ||
| SHIP_QUANTITY | NUMBER | Actual shipment quantity | ||
| INVOICED_AMOUNT | NUMBER | Invoiced amount | ||
| COGS_AMOUNT | NUMBER | Cost of goods sold amount | ||
| SALES_ACCOUNT | NUMBER | Sales account identifier | ||
| COGS_ACCOUNT | NUMBER | Cost of goods sold identifier | ||
| TERRITORY_ID | NUMBER | Territory identifier | ||
| CUSTOMER_CLASS_CODE | VARCHAR2 | (30) | Industry identifier | |
| MARGIN | NUMBER | Margin | ||
| MARGIN_PCT | NUMBER | Margin percentage | ||
| RETURN_REFERENCE_TYPE_CODE | VARCHAR2 | (30) | Return reference type identifier for the RMA lines | |
| RETURN_REFERENCE_ID | NUMBER | Return reference identifier for the RMA lines | ||
| LINK_TO_LINE_ID | NUMBER | Parent line identifier if RETURN_REFERENCE_TYPE_CODE is populated | ||
| RMA_HEADER_ID | NUMBER | Header identifier for the RMA lines | ||
| RMA_NUMBER | NUMBER | Order number for the RMA lines | ||
| RMA_INVENTORY_ITEM_ID | NUMBER | Inventory item identifier for the RMA lines | ||
| RMA_LINE_ID | NUMBER | Line identifier for the RMA lines | ||
| RMA_LINE_NUMBER | NUMBER | Line number for the RMA lines | ||
| RMA_ORGANIZATION_ID | NUMBER | Organization identifier for the RMA lines | ||
| RMA_LINE_TYPE_CODE | VARCHAR2 | (30) | Line type code for the RMA lines | |
| RMA_SHIP_TO_SITE_USE_ID | NUMBER | Site identifier for the shipped site for the RMA lines | ||
| RMA_INVOICE_INVENTORY_ITEM_ID | NUMBER | Invoiced inventory item identifier for the RMA lines | ||
| CR_TRX_ID | NUMBER | Credit memo identifier in RA_CUSTOMER_TRX | ||
| CR_TRX_LINE_ID | NUMBER | Credit memo Identifier in RA_CUSTOMER_TRX_LINES | ||
| PERIOD_NAME_YEAR | VARCHAR2 | (15) | Year name from General Ledger Periods | |
| PERIOD_NUM_YEAR | NUMBER | Number identifier of Year in General Ledger Period | ||
| PERIOD_NAME_QTR | VARCHAR2 | (15) | Quarter name from General Ledger Periods | |
| PERIOD_NUM_QTR | NUMBER | Number identifier of Quarter in General Ledger Period | ||
| PERIOD_SEQ_QTR | NUMBER | Sequence of General Ledger Period Quarter | ||
| PERIOD_NAME_MONTH | VARCHAR2 | (15) | Month name from General Ledger Periods | |
| PERIOD_NUM_MONTH | NUMBER | Number identifier of Month in General Ledger Period | ||
| PERIOD_SEQ_MONTH | NUMBER | Sequence of General Ledger Period Month | ||
| OE_ITEM_CATEGORY_ID | NUMBER | Item Category Identifier based on the default category set of the OE functional area | ||
| AREA_CODE | VARCHAR2 | (30) | Identifier of Area level of the BIS geography dimension | |
| COUNTRY_CODE | VARCHAR2 | (2) | Identifier of Country level of the BIS geography dimension | |
| REGION_CODE | VARCHAR2 | (30) | Identifier of Region level of the BIS geography dimension | |
| AREA_NAME | VARCHAR2 | (80) | Name of Area level of the BIS geography dimension | |
| COUNTRY_NAME | VARCHAR2 | (80) | Name of Country level of the BIS geography dimension | |
| REGION_NAME | VARCHAR2 | (80) | Name of Region level of the BIS geography dimension | |
| OPERATING_UNIT_NAME | VARCHAR2 | (60) | Name of Operating Unit |
BOM.CST_MARGIN_TEMP does not reference any database object
BOM.CST_MARGIN_TEMP is referenced by following:
| Description: | Item cost mass edit historical information |
|---|
CST_MASS_EDITS stores a row of information about each Mass Edit
Cost Information request. The information stored includes the mass
edit concurrent program identifier, the mass edit name, and the stored
procedure used. To remove a Mass Edit from your list of values, you
must insert a disable date.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_MASS_EDITS_U1 | UNIQUE | APPS_TS_TX_IDX | MASS_EDIT_ID |
| CST_MASS_EDITS_U2 | UNIQUE | APPS_TS_TX_IDX | MASS_EDIT_NAME |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| MASS_EDIT_ID | NUMBER | Y | Mass edit identifier | |
| MASS_EDIT_NAME | VARCHAR2 | (50) | Y | Mass edit name |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| USER_DEFINED | NUMBER | Y | Flag indicating whether this mass edit procedure is user-defined | |
| CONCURRENT_PROGRAM | VARCHAR2 | (50) | Y | Concurrent program name to run the mass edit |
| PROCEDURE_NAME | VARCHAR2 | (50) | Stored procedure name to run the mass edit | |
| INVENTORY_FLAG | NUMBER | Not currently used | ||
| DISABLE_DATE | DATE | Inactive On/After | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column |
BOM.CST_MASS_EDITS does not reference any database object
BOM.CST_MASS_EDITS is referenced by following:
| Description: | Stores material overhead rules |
|---|
This table stores the rules that will be used by transactions that earn material overhead to determine if material overhead cost is to be absorbed or not. The rules are defined by organization, transaction type and item type.
If there are no rules defined, i.e., the table contains no rows, then the default behavior is adopted - material overhead cost is always absorbed. However, when rules are defined they are used to determine absorption of material overhead costs.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_MATERIAL_OVHD_RULES_U1 | UNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
TRANSACTION_TYPE ITEM_TYPE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RULE_ID | NUMBER | Y | Rule Identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| TRANSACTION_TYPE | NUMBER | Y | Transaction Type Identifier - determines the transaction type for which the rules is defined. | |
| SELECTION_CRITERIA | NUMBER | Not currently used | ||
| CATEGORY_ID | NUMBER | Not currently used | ||
| ITEM_FROM | NUMBER | Not currently used | ||
| ITEM_TO | NUMBER | Not currently used | ||
| ITEM_TYPE | NUMBER | Y | Item type | |
| SHIP_FROM_ORG | NUMBER | Not currently used | ||
| COST_TYPE_ID | NUMBER | Identifies the cost type identifier against which material overhead is earned. | ||
| EARN_MOH | NUMBER | Y | Identifies if material overhead should be earned or not. |
BOM.CST_MATERIAL_OVHD_RULES does not reference any database object
BOM.CST_MATERIAL_OVHD_RULES is referenced by following:
| Description: | Transaction types being excluded from inventory analytical ledger and inventory trial balance reports |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_MGD_IAL_INVALID_MMT.TRANSACTION_SOURCE_TYPE_ID | MTL_TXN_SOURCE_TYPES |
This table is used to store the material transaction types, which are excluded from reporting in the Inventory Analytical Ledger Report and in the Inventory Trial Balance Report. These reports are the Greek Legal requirements.
This table primarily consists of two important columns: TRANSACTION_SOURCE_TYPE_ID and TRANSACTION_ACTION_ID which in combination makes a unique transaction type of the material transaction. Table will be populated with seed data, which has the exclude list of transaction types according to legal requirements of Greece
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_MGD_IAL_INVALID_MMT_U1 | UNIQUE | APPS_TS_SEED |
TRANSACTION_SOURCE_TYPE_ID
TRANSACTION_ACTION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Y | Transaction source type identifier that is associated with the transaction type | |
| TRANSACTION_ACTION_ID | NUMBER | Y | Transaction action identifier that is associated with the transaction type | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Standard Who column | |
| REQUEST_ID | NUMBER | (15) | Standard Who column | |
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Standard Who column | |
| PROGRAM_ID | NUMBER | (15) | Standard Who column | |
| PROGRAM_UPDATE_DATE | DATE | Standard Who column |
BOM.CST_MGD_IAL_INVALID_MMT does not reference any database object
BOM.CST_MGD_IAL_INVALID_MMT is referenced by following:
| Description: | Stores inflation adjustment values |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
CST_MGD_INFL_ADJUSTED_COSTS.ACCT_PERIOD_ID
CST_MGD_INFL_ADJUSTED_COSTS.ORGANIZATION_ID |
ORG_ACCT_PERIODS |
CST_MGD_INFL_ADJUSTED_COSTS is used to store the value of the inflation adjusted cost. It
contains one row for each item in each period. Each record is identified by the combinations INVENTORY_ITEM_ID, ORGANIZATION_ID, and ACCT_PERIOD_ID.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_MGD_INFL_ADJUSTED_COSTS_U1 | UNIQUE | APPS_TS_TX_IDX |
INVENTORY_ITEM_ID
ORGANIZATION_ID ACCT_PERIOD_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item Identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| ACCT_PERIOD_ID | NUMBER | Y | Account Period Identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who column | ||
| PROGRAM_ID | NUMBER | Standard Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who column | ||
| COUNTRY_CODE | VARCHAR2 | (15) | Y | Country Code |
| BEGIN_QTY | NUMBER | Y | Quantity on-hand at the start of the period | |
| BEGIN_COST | NUMBER | Y | Cost at the start of the period | |
| BEGIN_INFLATION_ADJ | NUMBER | Y | Inflation at the start of the period. Calculated from ending inflation of the previous period. | |
| PURCHASE_QTY | NUMBER | Quantity purchased in the current period | ||
| PURCHASE_COST | NUMBER | Purchase cost for the current period | ||
| ACTUAL_QTY | NUMBER | Quantity on-hand in the current period | ||
| ACTUAL_COST | NUMBER | Cost of goods on-hand in the current period | ||
| ACTUAL_INFLATION_ADJ | NUMBER | Inflation adjustment for the current period | ||
| ISSUE_QTY | NUMBER | Quantity issued in the current period | ||
| ISSUE_COST | NUMBER | Cost of goods issued in the current period | ||
| ISSUE_INFLATION_ADJ | NUMBER | Inflation adjustment calculated from issue of goods. | ||
| INVENTORY_ADJ_ACCT_CR | NUMBER | Inventory Inflation Adjustment Account (Credit) | ||
| INVENTORY_ADJ_ACCT_DR | NUMBER | Inventory Inflation Adjustment Account (Debit) | ||
| MONETARY_CORR_ACCT_CR | NUMBER | Monetary Correction Account | ||
| SALES_COST_ACCT_DR | NUMBER | Inflation Adjustments of Sales Cost Account | ||
| HISTORICAL_FLAG | VARCHAR2 | (1) | Y | Historical Data (Y/N) |
BOM.CST_MGD_INFL_ADJUSTED_COSTS does not reference any database object
BOM.CST_MGD_INFL_ADJUSTED_COSTS is referenced by following:
| Description: | Stores data that supports the Inflation Adjustment Kardex Report |
|---|
CST_MGD_INFL_ADJ_KARDEX_DATA is a temporary table containing Kardex data for reporting. It is
populated according to user parameters defined when the Kardex report is run.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item Identifier | |
| TXN_DATE | DATE | Transfer Date | ||
| TXN_TYPE | VARCHAR2 | (30) | Transfer Type | |
| TXN_INI_QTY | NUMBER | Y | Initial Transfer Quantity | |
| TXN_INI_UNIT_COST | NUMBER | Y | Initial Transfer Unit Cost | |
| TXN_INI_H_TOTAL_COST | NUMBER | Y | Initial Transfer Historical Total Cost | |
| TXN_INI_ADJ_TOTAL_COST | NUMBER | Y | Initial Transfer Adjustment Total Cost | |
| TXN_QTY | NUMBER | Transfer Quantities | ||
| TXN_UNIT_COST | NUMBER | Transfer Unit Cost | ||
| TXN_H_TOTAL_COST | NUMBER | Transfer Historical Total Cost | ||
| TXN_ADJ_TOTAL_COST | NUMBER | Transfer Adjustment Total Cost | ||
| TXN_FNL_QTY | NUMBER | Y | Transfer Final Quantity | |
| TXN_FNL_UNIT_COST | NUMBER | Y | Transfer Final Unit Cost | |
| TXN_FNL_H_TOTAL_COST | NUMBER | Y | Transfer Final Historical Total Cost | |
| TXN_FNL_ADJ_TOTAL_COST | NUMBER | Y | Transfer Final Adjustment Total Cost | |
| CREATION_DATE | DATE | |||
| TRANSACTION_ID | NUMBER |
BOM.CST_MGD_INFL_ADJ_KARDEX_DATA does not reference any database object
BOM.CST_MGD_INFL_ADJ_KARDEX_DATA is referenced by following:
| Description: | Stores inflation status for each period. |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
CST_MGD_INFL_ADJ_PER_STATUSES.ACCT_PERIOD_ID
CST_MGD_INFL_ADJ_PER_STATUSES.ORGANIZATION_ID |
ORG_ACCT_PERIODS |
CST_MGD_INFL_ADJ_PER_STATUSES is an extension of the ORG ACCOUNTING PERIOD entity. It is
used to store the status of a period with respect to the Inflation Adjustment process. A row is inserted in this table when the transfer to General Ledger is completed for a given period, indicating that the period has been finalized.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_MGD_INFL_ADJ_PER_STATUS_U1 | UNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
ACCT_PERIOD_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| ACCT_PERIOD_ID | NUMBER | Y | Account Period Identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Standard Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who Column | ||
| PROGRAM_ID | NUMBER | Standard Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who Column | ||
| STATUS | VARCHAR2 | (30) | Y | Status of a period with respect to the Inflation Adjustment process |
BOM.CST_MGD_INFL_ADJ_PER_STATUSES does not reference any database object
BOM.CST_MGD_INFL_ADJ_PER_STATUSES is referenced by following:
| Description: | Stores transfer organization information for inflation adjustment. |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_MGD_INFL_TSF_ORG_ENTRIES.TRANSACTION_ID | MTL_MATERIAL_TRANSACTIONS |
|
CST_MGD_INFL_TSF_ORG_ENTRIES.ACCT_PERIOD_ID
CST_MGD_INFL_TSF_ORG_ENTRIES.ORGANIZATION_ID |
ORG_ACCT_PERIODS |
CST_MGD_INFL_TSF_ORG_ENTRIES is used to store the opposing organization's journal entry information for transfers. Once accounting is generated for a period and the transfer to General Ledger is completed, the data is deleted from this table. Journal entry value is stored in ENTERED_DR ( debit) or ENTERED_CR (credit), but not both values in one row.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | Y | Transaction Identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item Identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| ACCT_PERIOD_ID | NUMBER | Y | Account Period Identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who column | ||
| PROGRAM_ID | NUMBER | Standard Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who column | ||
| COUNTRY_CODE | VARCHAR2 | (2) | Y | Country Code |
| TRANSFER_ORGANIZATION_ID | NUMBER | Y | Organization Identifier for organization involved in transfer | |
| ENTERED_DR | NUMBER | Debit amount entered as a result of the transfer | ||
| ENTERED_CR | NUMBER | Credit amount entered as a result of the transfer |
BOM.CST_MGD_INFL_TSF_ORG_ENTRIES does not reference any database object
BOM.CST_MGD_INFL_TSF_ORG_ENTRIES is referenced by following:
| Description: |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| TXN_DATE | DATE | |||
| TXN_TYPE | VARCHAR2 | (30) | ||
| TXN_INI_QTY | NUMBER | Y | ||
| TXN_INI_UNIT_COST | NUMBER | Y | ||
| TXN_INI_H_TOTAL_COST | NUMBER | Y | ||
| TXN_INI_ADJ_TOTAL_COST | NUMBER | Y | ||
| TXN_QTY | NUMBER | |||
| TXN_UNIT_COST | NUMBER | |||
| TXN_H_TOTAL_COST | NUMBER | |||
| TXN_ADJ_TOTAL_COST | NUMBER | |||
| TXN_FNL_QTY | NUMBER | Y | ||
| TXN_FNL_UNIT_COST | NUMBER | Y | ||
| TXN_FNL_H_TOTAL_COST | NUMBER | Y | ||
| TXN_FNL_ADJ_TOTAL_COST | NUMBER | Y | ||
| UOM_CODE | VARCHAR2 | (3) | ||
| ITEM_CODE | VARCHAR2 | (40) | ||
| ITEM_DESC | VARCHAR2 | (240) | ||
| ORG_NAME | VARCHAR2 | (240) | ||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| TXN_SOURCE | VARCHAR2 | (30) | ||
| TRANSACTION_ID | NUMBER | Y | ||
| CREATION_DATE | DATE |
BOM.CST_MGD_MSTR_BOOK_TEMP does not reference any database object
BOM.CST_MGD_MSTR_BOOK_TEMP is referenced by following:
| Description: | Table to store miscellaneous AP transactions and any INV transactions that hit an accrual account |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_MISC_RECONCILIATION.INVENTORY_TRANSACTION_ID | MTL_MATERIAL_TRANSACTIONS |
| CST_MISC_RECONCILIATION.PO_DISTRIBUTION_ID | PO_DISTRIBUTIONS_ALL |
| CST_MISC_RECONCILIATION.ACCRUAL_ACCOUNT_ID | GL_CODE_COMBINATIONS |
| CST_MISC_RECONCILIATION.VENDOR_ID | PO_VENDORS |
| CST_MISC_RECONCILIATION.OPERATING_UNIT_ID | HR_ALL_ORGANIZATION_UNITS |
Table will be used in the accrual reconciliation process to handle miscellaneous AP transactions as well as any INV transaction that hit an accrual account
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_MISC_RECONCILIATION_N1 | NONUNIQUE | APPS_TS_TX_IDX |
OPERATING_UNIT_ID
TRANSACTION_DATE |
| CST_MISC_RECONCILIATION_N2 | NONUNIQUE | APPS_TS_TX_IDX |
TRANSACTION_TYPE_CODE
INVOICE_DISTRIBUTION_ID |
| CST_MISC_RECONCILIATION_N3 | NONUNIQUE | APPS_TS_TX_IDX |
INVENTORY_TRANSACTION_ID
TRANSACTION_TYPE_CODE |
| CST_MISC_RECONCILIATION_N4 | NONUNIQUE | APPS_TS_TX_IDX | PO_DISTRIBUTION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_DATE | DATE | Y | Transaction Date | |
| AMOUNT | NUMBER | Y | Transaction Amount | |
| ENTERED_AMOUNT | NUMBER | Entered Transaction Amount | ||
| QUANTITY | NUMBER | Transaction Quantity | ||
| CURRENCY_CODE | VARCHAR2 | (15) | Currency Code | |
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | Currency Conversion Type | |
| CURRENCY_CONVERSION_RATE | NUMBER | Currency Conversion Type | ||
| CURRENCY_CONVERSION_DATE | DATE | Currency Conversion Date | ||
| INVOICE_DISTRIBUTION_ID | NUMBER | Invoice Distribution Identifier | ||
| INVENTORY_TRANSACTION_ID | NUMBER | Inventory Transaction Identifier | ||
| PO_DISTRIBUTION_ID | NUMBER | PO Distribution Identifier | ||
| ACCRUAL_ACCOUNT_ID | NUMBER | Y | Accrual Account Identifier | |
| TRANSACTION_TYPE_CODE | VARCHAR2 | (25) | Y | Transaction Type Identifier |
| INVENTORY_ITEM_ID | NUMBER | Item Identifier | ||
| VENDOR_ID | NUMBER | Vendor Identifier | ||
| INVENTORY_ORGANIZATION_ID | NUMBER | Organization Identifier | ||
| WRITE_OFF_SELECT_FLAG | VARCHAR2 | (1) | Internal Record Selection | |
| OPERATING_UNIT_ID | NUMBER | Y | Operating Unit Identifier | |
| BUILD_ID | NUMBER | Build Identifier | ||
| AE_HEADER_ID | NUMBER | Accounting Header Identifier | ||
| LAST_UPDATE_DATE | DATE | Standard Who Column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Standard Who Column | ||
| CREATED_BY | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who Column | ||
| AE_LINE_NUM | NUMBER | Accounting Line Number |
BOM.CST_MISC_RECONCILIATION does not reference any database object
BOM.CST_MISC_RECONCILIATION is referenced by following:
| Description: | Stores the accounts defined against an organization cost group |
|---|
The CST_COST_GROUP_ACCOUNTS table stores the pertinent accounts used for Periodic Costing.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ORG_COST_GROUP_ACCOUNTS_U1 | UNIQUE | APPS_TS_TX_IDX |
LEGAL_ENTITY_ID
COST_TYPE_ID COST_GROUP_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY_ID | NUMBER | (15) | Y | Legal Entity Identifier |
| COST_TYPE_ID | NUMBER | (15) | Y | Cost Type Identifier |
| COST_GROUP_ID | NUMBER | (15) | Y | Cost Group Identifier |
| INVENTORY_OFFSET_ACCOUNT | NUMBER | |||
| COST_VARIANCE_ACCOUNT | NUMBER | Cost Variance Account Number | ||
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who Column |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who Column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Y | Standard Who Column |
| PROGRAM_UPDATE_DATE | DATE | Extended Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Extended Who Column | |
| PROGRAM_ID | NUMBER | (15) | Extended Who Column | |
| REQUEST_ID | NUMBER | (15) | Extended Who Column | |
| RETRO_PRICE_ADJ_ACCOUNT | NUMBER | Periodic Retroactive Price Adjustment Account | ||
| LANDED_COST_VAR_ACCOUNT | NUMBER | Landed Cost Variance Account | ||
| LANDED_COST_ABS_ACCOUNT | NUMBER | Landed Cost Absorption Account |
BOM.CST_ORG_COST_GROUP_ACCOUNTS does not reference any database object
BOM.CST_ORG_COST_GROUP_ACCOUNTS is referenced by following:
| Description: |
|---|
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| UPGRADE_DATE | DATE | Upgrade date | ||
| PENDING_MMTT_TXNS | NUMBER | |||
| UNCOSTED_MMT_TXNS | NUMBER | |||
| ERRORED_MMT_TXNS | NUMBER | |||
| UNCOSTED_WCTI_TXNS | NUMBER | |||
| ERRORED_WCTI_TXNS | NUMBER | |||
| UNCOSTED_WSMT_TXNS | NUMBER | |||
| ERRORED_WSMT_TXNS | NUMBER |
BOM.CST_OSFM_UPGRADE_TEMP does not reference any database object
BOM.CST_OSFM_UPGRADE_TEMP is referenced by following:
| Description: | Temporary table for storing accrual accounts for Accrual Reconciliation for periodic costing |
|---|
Temporary table for storing accrual accounts for Accrual Reconciliation
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| REQUEST_ID | NUMBER | Y | Standard Who column | |
| ACCRUAL_ACCOUNT_ID | NUMBER | Y | Accrual Account unique identifier | |
| LEGAL_ENTITY_ID | NUMBER | (15) | Y | Legal entity unique identifier |
BOM.CST_PAC_ACCRUAL_ACCOUNTS_TEMP does not reference any database object
BOM.CST_PAC_ACCRUAL_ACCOUNTS_TEMP is referenced by following:
| Description: | Temporary table for Accrual Reconciliation for periodic costing |
|---|
CST_PAC_ACCRUAL_RECONCILE_TEMP is a temporary table that stores information pertinent to Periodic Accrual Reconciliation Report. This table holds accrual information from Oracle Payables, Oracle Purchasing, Oracle Inventory and Oracle Work in Process.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_ACCR_RECONCILE_TEMP_N1 | NONUNIQUE | APPS_TS_INTERFACE |
LEGAL_ENTITY_ID
COST_GROUP_ID COST_TYPE_ID PERIOD_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_DATE | DATE | Y | Date for the transaction | |
| INVENTORY_ITEM_ID | NUMBER | Item unique identifier | ||
| TRANSACTION_QUANTITY | NUMBER | Quantity for the transaction, in the PO_UOM | ||
| PO_HEADER_ID | NUMBER | Document header unique identifier | ||
| PO_LINE_NUM | NUMBER | Purchase order Line number | ||
| PO_LINE_ID | NUMBER | Document line unique identifier | ||
| VENDOR_NAME | VARCHAR2 | (240) | Supplier name | |
| INVOICE_ID | NUMBER | Invoice unique identifier | ||
| INVOICE_LINE_NUM | NUMBER | Invoice distribution number | ||
| LINE_MATCH_ORDER | NUMBER | Line sequence number for matching | ||
| REQUEST_ID | NUMBER | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who column | ||
| PROGRAM_ID | NUMBER | Standard Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who column | ||
| TRANSACTION_ORGANIZATION_ID | NUMBER | (15) | Y | Organization where transaction took place |
| VENDOR_ID | NUMBER | Supplier unique identifier | ||
| ITEM_MASTER_ORGANIZATION_ID | NUMBER | Y | Item Master/Purchasing reference organization | |
| ACCRUAL_ACCOUNT_ID | NUMBER | Y | Accrual account unique identifier | |
| ACCRUAL_CODE | VARCHAR2 | (80) | Type of transaction or A/P match condition | |
| PO_TRANSACTION_TYPE | VARCHAR2 | (25) | Purchasing transaction code | |
| INVOICE_NUM | VARCHAR2 | (50) | Invoice number | |
| RECEIPT_NUM | VARCHAR2 | (30) | Receipt number | |
| PO_TRANSACTION_ID | NUMBER | Receiving transaction unique identifier | ||
| INV_TRANSACTION_ID | NUMBER | Inventory transaction unique identifier | ||
| INV_TRANSACTION_TYPE_ID | NUMBER | Inventory transaction type unique identifier | ||
| WIP_TRANSACTION_ID | NUMBER | WIP transaction unique identifier | ||
| WIP_TRANSACTION_TYPE_ID | NUMBER | WIP transaction type unique identifier | ||
| PO_UNIT_OF_MEASURE | VARCHAR2 | (25) | PO unit of measure | |
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (25) | Primary unit of measure for the item | |
| NET_PO_LINE_QUANTITY | NUMBER | Po line invoice quantity less PO line receipt quantity, for Release 9 calculations | ||
| PO_NUM | VARCHAR2 | (20) | PO number | |
| PO_DISTRIBUTION_ID | NUMBER | Document distribution unique identifier | ||
| TRANSACTION_UNIT_PRICE | NUMBER | Unit price for the transaction | ||
| AVG_RECEIPT_PRICE | NUMBER | Average receipt price for the PO line | ||
| TRANSACTION_AMOUNT | NUMBER | Transaction debit or credit | ||
| TRANSACTION_SOURCE_CODE | VARCHAR2 | (25) | Y | Transaction source or subledger |
| WRITE_OFF_FLAG | VARCHAR2 | (1) | Indicates whether what has been written off | |
| WRITE_OFF_ID | NUMBER | Write-off unique identifier | ||
| DESTINATION_TYPE_CODE | VARCHAR2 | (25) | Destination type for the transaction | |
| REASON_ID | NUMBER | Transaction reason unique identifier | ||
| COMMENTS | VARCHAR2 | (240) | Comments for accrual write-off | |
| PERIOD_NAME | VARCHAR2 | (15) | Accounting period name | |
| NET_PO_LINE_AMOUNT | NUMBER | PO line invoice amount less receipt amount. Used for IPV. | ||
| INVOICE_PRICE_VARIANCE | NUMBER | Invoice price variance | ||
| AGING_DATE | DATE | Earliest transaction date for the PO line | ||
| PERIOD_ID | NUMBER | Periodic costing period unique identifier | ||
| LINE_LOCATION_ID | NUMBER | Document line location unique identifier | ||
| VENDOR_NAME_ALT | VARCHAR2 | (320) | Alternate supplier name for Japanese location | |
| LEGAL_ENTITY_ID | NUMBER | (15) | Y | Legal entity unique identifier |
| COST_GROUP_ID | NUMBER | (15) | Y | Cost group unique identifier |
| COST_TYPE_ID | NUMBER | (15) | Y | Cost type unique identifier |
| ADJUSTMENT_TRANSACTION | NUMBER | Specifies if the transaction is a retro active price adjustment |
BOM.CST_PAC_ACCRUAL_RECONCILE_TEMP does not reference any database object
BOM.CST_PAC_ACCRUAL_RECONCILE_TEMP is referenced by following:
| Description: | Stores the write-off information for Accrual Reconciliation for periodic costing |
|---|
Stores the write-off information for Accrual Reconciliation
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_ACCRUAL_WRITE_OFFS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
LEGAL_ENTITY_ID
COST_GROUP_ID COST_TYPE_ID PERIOD_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_DATE | DATE | Y | Original transaction | |
| INVOICE_NUM | VARCHAR2 | (50) | Invoice number | |
| RECEIPT_NUM | VARCHAR2 | (30) | Receipt number | |
| PO_TRANSACTION_ID | NUMBER | Receiving transaction unique identifier | ||
| INV_TRANSACTION_ID | NUMBER | Inventory transaction unique identifier | ||
| INV_TRANSACTION_TYPE_ID | NUMBER | Inventory transaction type unique identifier | ||
| WIP_TRANSACTION_ID | NUMBER | WIP transaction unique identifier | ||
| WIP_TRANSACTION_TYPE_ID | NUMBER | WIP transaction type unique identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Item unique identifier | ||
| PO_UNIT_OF_MEASURE | VARCHAR2 | (25) | PO unit of measure | |
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (25) | Primary unit of measure for the item | |
| TRANSACTION_QUANTITY | NUMBER | Quantity for the transaction | ||
| NET_PO_LINE_QUANTITY | NUMBER | PO line invoice quantity less receipt quantity | ||
| PO_HEADER_ID | NUMBER | Document header unique identifier | ||
| PO_NUM | VARCHAR2 | (20) | PO number | |
| PO_LINE_NUM | NUMBER | PO line number | ||
| PO_LINE_ID | NUMBER | Document line unique identifier | ||
| PO_DISTRIBUTION_ID | NUMBER | Document distribution unique identifier | ||
| VENDOR_ID | NUMBER | Supplier unique identifier | ||
| VENDOR_NAME | VARCHAR2 | (240) | Supplier name | |
| TRANSACTION_UNIT_PRICE | NUMBER | Unit price for the transaction | ||
| INVOICE_ID | NUMBER | Invoice unique identifier | ||
| INVOICE_LINE_NUM | NUMBER | Invoice distribution number | ||
| AVG_RECEIPT_PRICE | NUMBER | Average receipt price for the purchase order line | ||
| TRANSACTION_AMOUNT | NUMBER | Transaction debit or credit | ||
| LINE_MATCH_ORDER | NUMBER | Line sequence number for printing Periodic Accrual Reconciliation report | ||
| TRANSACTION_SOURCE_CODE | VARCHAR2 | (25) | Y | Transaction source or subledger |
| REASON_ID | NUMBER | Transaction reason unique identifier | ||
| COMMENTS | VARCHAR2 | (240) | Comments for accrual write-off | |
| WRITE_OFF_CODE | VARCHAR2 | (25) | Write-off status for the write-off transaction | |
| DESTINATION_TYPE_CODE | VARCHAR2 | (25) | Destination type for the transaction | |
| INVOICE_PRICE_VARIANCE | NUMBER | For pre-release 10 transactions, the reported IPV | ||
| PERIOD_ID | NUMBER | Periodic costing period unique identifier | ||
| WRITE_OFF_ID | NUMBER | Y | Write-off unique identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Y | Standard Who column | |
| REQUEST_ID | NUMBER | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who column | ||
| PROGRAM_ID | NUMBER | Standard Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who column | ||
| PERIOD_NAME | VARCHAR2 | (15) | Accounting period name | |
| WRITE_OFF_GL_DATE | DATE | Y | The General Ledger date for the manual journal entry | |
| TRANSACTION_ORGANIZATION_ID | NUMBER | Y | Organization where transaction took place | |
| ITEM_MASTER_ORGANIZATION_ID | NUMBER | Y | Item Master/ Purchasing reference organization | |
| ACCRUAL_ACCOUNT_ID | NUMBER | Y | Accrual account unique identifier | |
| ACCRUAL_CODE | VARCHAR2 | (25) | Y | Transaction type or A/P match condition |
| PO_TRANSACTION_TYPE | VARCHAR2 | (25) | Purchasing transaction date | |
| LEGAL_ENTITY_ID | NUMBER | (15) | Y | Legal entity unique identifier |
| COST_GROUP_ID | NUMBER | (15) | Y | Cost group unique identifier |
| COST_TYPE_ID | NUMBER | (15) | Y | Cost type unique identifier |
| ADJUSTMENT_TRANSACTION | NUMBER | Specifies if the transaction is a retro active price adjustment |
BOM.CST_PAC_ACCRUAL_WRITE_OFFS does not reference any database object
BOM.CST_PAC_ACCRUAL_WRITE_OFFS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_PAC_ACCRUAL_WRITE_OFFS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_PAC_ACCRUAL_WRITE_OFFS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_AMOUNT | NUMBER | Transaction Amount | ||
| INVOICE_PRICE_VARIANCE | NUMBER | Invoice Price Variance | ||
| AVG_RECEIPT_PRICE | NUMBER | Average Receipt Price | ||
| TRANSACTION_ORGANIZATION_ID | NUMBER | Y | Transaction Organization Identifier | |
| TRANSACTION_UNIT_PRICE | NUMBER | Transaction Unit Price | ||
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.CST_PAC_ACCRUAL_WRITE_OFFS_EFC does not reference any database object
BOM.CST_PAC_ACCRUAL_WRITE_OFFS_EFC is referenced by following:
| Description: | PAC eAM Asset balances details |
|---|
This table is added for EAM support. This table contains estimated and actual costs at asset group and serial number level.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_EAM_ASSET_PER_BAL_N1 | NONUNIQUE | APPS_TS_TX_IDX |
LEGAL_ENTITY_ID
COST_GROUP_ID COST_TYPE_ID INVENTORY_ITEM_ID SERIAL_NUMBER |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY_ID | NUMBER | Y | Legal Entity ID | |
| COST_GROUP_ID | NUMBER | Y | PAC Cost Group ID | |
| COST_TYPE_ID | NUMBER | Y | PAC Cost Type ID | |
| PERIOD_SET_NAME | VARCHAR2 | (80) | Period Set Name | |
| PERIOD_NAME | VARCHAR2 | (80) | PAC Period Name | |
| PAC_PERIOD_ID | NUMBER | Y | PAC Period ID | |
| ORGANIZATION_ID | NUMBER | Y | Orgnization ID | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item ID | |
| SERIAL_NUMBER | VARCHAR2 | (80) | Y | serial number |
| MAINT_COST_CATEGORY | NUMBER | Y | Maintenance Cost Category | |
| ACTUAL_MAT_COST | NUMBER | Actual Material Cost | ||
| ACTUAL_LAB_COST | NUMBER | Actual Labour Cost | ||
| ACTUAL_EQP_COST | NUMBER | Actual Equipment Cost | ||
| SYSTEM_ESTIMATED_MAT_COST | NUMBER | Estimated Material Cost | ||
| SYSTEM_ESTIMATED_LAB_COST | NUMBER | Estimated Labour Cost | ||
| SYSTEM_ESTIMATED_EQP_COST | NUMBER | Estimated Equipment Cost | ||
| PERIOD_START_DATE | DATE | Period Start Date | ||
| LAST_UPDATE_DATE | DATE | Y | Standard who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who Column | |
| CREATION_DATE | DATE | Y | Standard who Column | |
| CREATED_BY | NUMBER | Y | Standard who Column | |
| REQUEST_ID | NUMBER | Concurrent who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who Column | ||
| PROGRAM_ID | NUMBER | Concurrent who Column | ||
| MAINTENANCE_OBJECT_ID | NUMBER | MAINTENANCE OBJECT ID | ||
| MAINTENANCE_OBJECT_TYPE | NUMBER | Maintenance Object Type |
BOM.CST_PAC_EAM_ASSET_PER_BALANCES does not reference any database object
BOM.CST_PAC_EAM_ASSET_PER_BALANCES is referenced by following:
| Description: | Estimated Cost Information by WAC Accounts for PAC |
|---|
Estimated Cost Information by WAC Accounts for PAC
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY_ID | NUMBER | Y | Legal Entity | |
| COST_GROUP_ID | NUMBER | Y | Cost Group | |
| COST_TYPE_ID | NUMBER | Y | Cost Type | |
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| ACCT_PERIOD_ID | NUMBER | Account period ID. Can be 0 if a future period. | ||
| WIP_ENTITY_ID | NUMBER | Y | Job id | |
| ORGANIZATION_ID | NUMBER | Y | Organization id | |
| OPERATIONS_DEPT_ID | NUMBER | Operations deparment id | ||
| OPERATIONS_SEQ_NUM | NUMBER | Operations seq num | ||
| MAINT_COST_CATEGORY | NUMBER | Y | Maintenance cost category | |
| OWNING_DEPT_ID | NUMBER | Y | Owning department id | |
| PERIOD_START_DATE | DATE | Y | Period start date | |
| ACCOUNT_ID | NUMBER | Y | Wip Accounting Class Account id | |
| ACCT_VALUE | NUMBER | Y | Amount charged to the acct | |
| TXN_TYPE | NUMBER | Y | Material, Labor or Equipment | |
| WIP_ACCT_CLASS_CODE | VARCHAR2 | (10) | Y | Accounting Class Code |
| MFG_COST_ELEMENT_ID | NUMBER | Y | Manufacturing Cost Element Id | |
| CREATED_BY | NUMBER | Who Column | ||
| CREATION_DATE | DATE | Who Column | ||
| LAST_UPDATED_BY | NUMBER | Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Who Column | ||
| LAST_UPDATE_DATE | DATE | Who Column |
BOM.CST_PAC_EAM_BALANCE_BY_ACCTS does not reference any database object
BOM.CST_PAC_EAM_BALANCE_BY_ACCTS is referenced by following:
| Description: | PAC eAM Asset balances details |
|---|
This table is added to EAM support for PAC. This table contains estimated and actual costs of a workorder.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_EAM_PERIOD_BAL_N1 | NONUNIQUE | APPS_TS_TX_IDX |
LEGAL_ENTITY_ID
COST_GROUP_ID COST_TYPE_ID WIP_ENTITY_ID ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY_ID | NUMBER | Y | Legal Entity ID | |
| COST_GROUP_ID | NUMBER | Y | PAC Cost Group ID | |
| COST_TYPE_ID | NUMBER | Y | PAC Cost Type ID | |
| PERIOD_SET_NAME | VARCHAR2 | (80) | Period Set Name | |
| PERIOD_NAME | VARCHAR2 | (80) | PAC Period Name | |
| PAC_PERIOD_ID | NUMBER | Y | PAC Period ID | |
| WIP_ENTITY_ID | NUMBER | Y | PAC WIP entity ID | |
| ORGANIZATION_ID | NUMBER | Y | Orgnization ID | |
| OWNING_DEPT_ID | NUMBER | Owning Department ID | ||
| OPERATIONS_DEPT_ID | NUMBER | Operation Department ID | ||
| OPERATION_SEQ_NUM | NUMBER | Operation Seq Number | ||
| MAINT_COST_CATEGORY | NUMBER | Maintenance Cost Category | ||
| ACTUAL_MAT_COST | NUMBER | Actual Material Cost | ||
| ACTUAL_LAB_COST | NUMBER | Actual Labour Cost | ||
| ACTUAL_EQP_COST | NUMBER | Actual Equipment Cost | ||
| SYSTEM_ESTIMATED_MAT_COST | NUMBER | Estimated Material Cost | ||
| SYSTEM_ESTIMATED_LAB_COST | NUMBER | Estimated Labour Cost | ||
| SYSTEM_ESTIMATED_EQP_COST | NUMBER | Estimated Equipment Cost | ||
| PERIOD_START_DATE | DATE | Period Start Date | ||
| LAST_UPDATE_DATE | DATE | Y | Standard who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who Column | |
| CREATION_DATE | DATE | Y | Standard who Column | |
| CREATED_BY | NUMBER | Y | Standard who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Y | Standard Who Column | |
| REQUEST_ID | NUMBER | Concurrent who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who Column | ||
| PROGRAM_ID | NUMBER | Concurrent who Column |
BOM.CST_PAC_EAM_PERIOD_BALANCES does not reference any database object
BOM.CST_PAC_EAM_PERIOD_BALANCES is referenced by following:
| Description: | eAM workOrder Estimation Status for PAC Cost Type |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_PAC_EAM_WO_EST_STATUSES.ORGANIZATION_ID | MTL_PARAMETERS |
| CST_PAC_EAM_WO_EST_STATUSES.COST_TYPE_ID | CST_COST_TYPES |
It contains the eAM workOrder Estimation Status for a PAC Cost type.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_EAM_WO_EST_STATUS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
LEGAL_ENTITY_ID
COST_GROUP_ID COST_TYPE_ID WIP_ENTITY_ID ESTIMATION_STATUS |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | Cost Type ID | |
| LEGAL_ENTITY_ID | NUMBER | Y | Legal Entity ID | |
| COST_GROUP_ID | NUMBER | Y | PAC Cost Group ID | |
| WIP_ENTITY_ID | NUMBER | Y | WIP Entity ID | |
| ESTIMATION_STATUS | NUMBER | Work Order Estimation Status | ||
| ORGANIZATION_ID | NUMBER | Y | Organization ID | |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO column | |
| CREATION_DATE | DATE | Y | Standard WHO column | |
| CREATED_BY | NUMBER | Y | Standard WHO column | |
| LAST_ESTIMATION_REQ_ID | NUMBER | Y | Standard WHO column | |
| LAST_ESTIMATION_DATE | DATE | Y | Standard WHO column |
BOM.CST_PAC_EAM_WO_EST_STATUSES does not reference any database object
BOM.CST_PAC_EAM_WO_EST_STATUSES is referenced by following:
| Description: | Stores distinct parent-child combinations of items for a given period and organization cost group. |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_PAC_EXPLOSION_TEMP.PAC_PERIOD_ID | CST_PAC_PERIODS |
| CST_PAC_EXPLOSION_TEMP.COST_GROUP_ID | CST_COST_GROUPS |
CST_PAC_EXPLOSION_TEMP stores distinct parent-child combinations of items for a given period and cost group. It is an intermediate table populated during the calculation of low level codes for Periodic Average Costing
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_EXPLOSION_TEMP_N1 | NONUNIQUE | APPS_TS_TX_IDX |
PAC_PERIOD_ID
COST_GROUP_ID COMPONENT_ITEM_ID |
| CST_PAC_EXPLOSION_TEMP_N2 | NONUNIQUE | APPS_TS_TX_IDX |
ASSEMBLY_ITEM_ID
PAC_PERIOD_ID COST_GROUP_ID COMPONENT_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PAC_PERIOD_ID | NUMBER | Y | Period Identifier | |
| COST_GROUP_ID | NUMBER | Y | Cost Group Identifier | |
| ASSEMBLY_ITEM_ID | NUMBER | Parent assembly item identifier | ||
| COMPONENT_ITEM_ID | NUMBER | Child item identifier | ||
| DELETED | VARCHAR2 | (1) | Flag, internally used during computation of low level codes | |
| LOOP_COUNT | NUMBER | Counter, internally used during computation of low level codes |
BOM.CST_PAC_EXPLOSION_TEMP does not reference any database object
BOM.CST_PAC_EXPLOSION_TEMP is referenced by following:
| Description: | used in the interorg transfer iteration procedure |
|---|
CST_PAC_INTERORG_TXNS_TMP is used by Iterative Periodic Average Cost Processor to store across Cost Group interorg transactions for a period fetched from MTL_MATERIAL_TRANSACTIONS table. The records in the table are cleared and repopulated when the processor is run using Start option. If the processor is run using Resume for non-tolerance then the table is not repopulated.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_INTERORG_TXNS_TMP_U1 | UNIQUE | APPS_TS_TX_IDX |
TRANSACTION_ID
COST_GROUP_ID PAC_PERIOD_ID TXN_TYPE |
| CST_PAC_INTERORG_TXNS_TMP_N1 | NONUNIQUE | APPS_TS_TX_IDX |
COST_GROUP_ID
PAC_PERIOD_ID INVENTORY_ITEM_ID TXN_TYPE |
| CST_PAC_INTERORG_TXNS_TMP_N2 | NONUNIQUE | APPS_TS_TX_IDX |
COST_GROUP_ID
TRANSFER_COST_GROUP_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | Y | Transaction Id | |
| COST_GROUP_ID | NUMBER | Y | Cost Group Id | |
| PAC_PERIOD_ID | NUMBER | Y | Periodic Average Costing Period | |
| TXN_TYPE | NUMBER | Y | Transaction Type. One of Cost Owned (1), Cost Derived (2) | |
| TRANSACTION_ACTION_ID | NUMBER | Y | Transaction Action Id | |
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Y | Transaction Source Type Id | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item Id | |
| PRIMARY_QUANTITY | NUMBER | Y | Primary Quantity | |
| PERIODIC_PRIMARY_QUANTITY | NUMBER | Periodic Primary Quantity | ||
| ORGANIZATION_ID | NUMBER | Y | Organization Id | |
| TRANSFER_ORGANIZATION_ID | NUMBER | Transfer Organization Id | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | Subinventory Code | |
| TRANSFER_PRICE | NUMBER | Transfer Price | ||
| SHIPMENT_NUMBER | VARCHAR2 | (30) | Shipment Number | |
| TRANSFER_TRANSACTION_ID | NUMBER | Transfer Transaction Id | ||
| WAYBILL_AIRBILL | VARCHAR2 | (20) | Airbill / waybill number | |
| TRANSFER_COST | NUMBER | Transfer Cost | ||
| TRANSPORTATION_COST | NUMBER | Transportation Cost | ||
| TRANSFER_PERCENTAGE | NUMBER | Transfer Percentage | ||
| TRANSFER_COST_GROUP_ID | NUMBER | Transfer Cost Group Id |
BOM.CST_PAC_INTERORG_TXNS_TMP does not reference any database object
BOM.CST_PAC_INTERORG_TXNS_TMP is referenced by following:
| Description: | used in the interorg transfer iteration procedure |
|---|
CST_PAC_INTORG_ITMS_TEMP is used in the interorg transfer iteration process of Periodic Absorption Cost Processor
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_INTORG_ITMS_TEMP_U1 | UNIQUE | APPS_TS_TX_IDX |
PAC_PERIOD_ID
COST_GROUP_ID INVENTORY_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item Identifier | |
| COST_GROUP_ID | NUMBER | Y | Cost Group Identifier | |
| PAC_PERIOD_ID | NUMBER | Y | PAC Period Identifier | |
| ITEM_COST | NUMBER | Item Cost | ||
| LOW_LEVEL_CODE | NUMBER | Low Level Code of Inventory Item specific to cost group | ||
| ABSORPTION_LEVEL_CODE | NUMBER | Bill of Materials Level to which item is absorbed | ||
| TOLERANCE_FLAG | VARCHAR2 | (1) | Tolerance Flag | |
| ITERATION_COUNT | NUMBER | Iteration Count | ||
| PREV_ITR_ITEM_COST | NUMBER | Previous iteration PMAC Item Cost | ||
| INTERORG_RECEIPT_FLAG | VARCHAR2 | (1) | Interorg Receipt Flag used in iteration process | |
| INTERORG_SHIPMENT_FLAG | VARCHAR2 | (1) | Interorg Shipment Flag used in Iteration Process of PACP | |
| SEQUENCE_NUM | NUMBER | Optimal Sequence of Cost Group in Iteration Process | ||
| DIFFERENCE | NUMBER | Difference between current and previous iteration item cost | ||
| DIVERGING_FLAG | VARCHAR2 | (1) | Diverging Flag |
BOM.CST_PAC_INTORG_ITMS_TEMP does not reference any database object
BOM.CST_PAC_INTORG_ITMS_TEMP is referenced by following:
| Description: | Stores the item cost and quantity in a period and organization cost group. |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_PAC_ITEM_COSTS.PAC_PERIOD_ID | CST_PAC_PERIODS |
| CST_PAC_ITEM_COSTS.COST_GROUP_ID | CST_COST_GROUPS |
| Foreign Key Column | Foreign Table |
|---|---|
| CST_PAC_ITEM_COST_DETAILS.COST_LAYER_ID | CST_PAC_ITEM_COSTS |
| CST_PAC_QUANTITY_LAYERS.COST_LAYER_ID | CST_PAC_ITEM_COSTS |
| MTL_PAC_ACTUAL_COST_DETAILS.COST_LAYER_ID | CST_PAC_ITEM_COSTS |
CST_PAC_ITEM_COSTS stores the item cost and quantity in a period and organization cost group.
The COST_LAYER_ID is unique for a period / organization cost group / item combination.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_ITEM_COSTS_U1 | UNIQUE | APPS_TS_TX_IDX | COST_LAYER_ID |
| CST_PAC_ITEM_COST_N1 | NONUNIQUE | APPS_TS_TX_IDX |
PAC_PERIOD_ID
COST_GROUP_ID INVENTORY_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_LAYER_ID | NUMBER | Y | Cost layer identifier | |
| PAC_PERIOD_ID | NUMBER | Y | Period Identifier | |
| COST_GROUP_ID | NUMBER | Y | Cost Group Identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item identifier | |
| BUY_QUANTITY | NUMBER | The buy quantity in the period | ||
| MAKE_QUANTITY | NUMBER | The make quantity in the period | ||
| ISSUE_QUANTITY | NUMBER | The quantity issued in the periodic costing period | ||
| TOTAL_LAYER_QUANTITY | NUMBER | The net quantity at the end of the Periodic Average Costing period | ||
| ITEM_COST | NUMBER | The item cost at the end of the period. | ||
| ITEM_BUY_COST | NUMBER | The buy item cost at the end of the period | ||
| ITEM_MAKE_COST | NUMBER | The make item cost at the end of the period | ||
| BEGIN_ITEM_COST | NUMBER | The item cost at the beginning of the period | ||
| MATERIAL_COST | NUMBER | Material cost | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material overhead cost | ||
| RESOURCE_COST | NUMBER | Resource cost | ||
| OVERHEAD_COST | NUMBER | Overhead cost | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside processing cost | ||
| PL_MATERIAL | NUMBER | Previous level material cost | ||
| PL_MATERIAL_OVERHEAD | NUMBER | Previous level material overhead cost | ||
| PL_RESOURCE | NUMBER | Previous level resource cost | ||
| PL_OUTSIDE_PROCESSING | NUMBER | Previous level outside processing cost | ||
| PL_OVERHEAD | NUMBER | Previous level overhead cost | ||
| TL_MATERIAL | NUMBER | This level material cost | ||
| TL_MATERIAL_OVERHEAD | NUMBER | This level material overhead cost | ||
| TL_RESOURCE | NUMBER | This level resource cost | ||
| TL_OUTSIDE_PROCESSING | NUMBER | This level outside processing cost | ||
| TL_OVERHEAD | NUMBER | This level overhead cost | ||
| PL_ITEM_COST | NUMBER | Total previous level item cost | ||
| TL_ITEM_COST | NUMBER | Total item cost in this level | ||
| UNBURDENED_COST | NUMBER | Item unit cost minus this level material overhead | ||
| BURDEN_COST | NUMBER | This level material overhead | ||
| LAST_UPDATE_DATE | DATE | Y | Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Who column | |
| CREATION_DATE | DATE | Y | Who column | |
| CREATED_BY | NUMBER | Y | Who column | |
| REQUEST_ID | NUMBER | Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Who column | ||
| PROGRAM_ID | NUMBER | Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Who column | ||
| MARKET_VALUE | NUMBER | Market value | ||
| JUSTIFICATION | VARCHAR2 | (2000) | Justification for the market value | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (150) | Descriptive Flexfield segment |
BOM.CST_PAC_ITEM_COSTS does not reference any database object
BOM.CST_PAC_ITEM_COSTS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_PAC_ITEM_COSTS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_PAC_ITEM_COSTS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| MARKET_VALUE | NUMBER | Market Value | ||
| RESOURCE_COST | NUMBER | Resource Cost | ||
| COST_LAYER_ID | NUMBER | Y | Cost Layer Identifier | |
| PL_ITEM_COST | NUMBER | Previous Level Item Cost | ||
| PAC_PERIOD_ID | NUMBER | Y | Periodic Actual Costing Period Identifier | |
| PL_RESOURCE | NUMBER | Previous Level Resource | ||
| UNBURDENED_COST | NUMBER | Unburdened Cost | ||
| ITEM_MAKE_COST | NUMBER | Item Make Cost | ||
| TL_ITEM_COST | NUMBER | This Level Item Cost | ||
| OVERHEAD_COST | NUMBER | Overhead Cost | ||
| ITEM_COST | NUMBER | Item Cost | ||
| MATERIAL_COST | NUMBER | Material Cost | ||
| TL_RESOURCE | NUMBER | This Level Resource | ||
| PL_OVERHEAD | NUMBER | Previous Level Overhead | ||
| PL_MATERIAL | NUMBER | Previous Level Material | ||
| BEGIN_ITEM_COST | NUMBER | Begin Item Cost | ||
| TL_OVERHEAD | NUMBER | This Level Overhead | ||
| TL_MATERIAL | NUMBER | This Level Material | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside Processing Cost | ||
| COST_GROUP_ID | NUMBER | Y | Cost Group Identifier | |
| PL_OUTSIDE_PROCESSING | NUMBER | Previous Level Outside Processing | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material Overhead Cost | ||
| ITEM_BUY_COST | NUMBER | Item Buy Cost | ||
| PL_MATERIAL_OVERHEAD | NUMBER | Previous Level Material Overhead | ||
| BURDEN_COST | NUMBER | Burden Cost | ||
| TL_OUTSIDE_PROCESSING | NUMBER | This Level Outside Processing | ||
| TL_MATERIAL_OVERHEAD | NUMBER | This Level Material Overhead | ||
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.CST_PAC_ITEM_COSTS_EFC does not reference any database object
BOM.CST_PAC_ITEM_COSTS_EFC is referenced by following:
| Description: | Stores the details of the item cost in a period and organization cost group. |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_PAC_ITEM_COST_DETAILS.COST_LAYER_ID | CST_PAC_ITEM_COSTS |
| CST_PAC_ITEM_COST_DETAILS.COST_ELEMENT_ID | CST_COST_ELEMENTS |
CST_PAC_ITEM_COST_DETAILS table stores item cost details for a period and organization cost group. The costs are held by element by level.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_ITEM_COST_DETAILS_U1 | UNIQUE | APPS_TS_TX_IDX |
COST_LAYER_ID
COST_ELEMENT_ID LEVEL_TYPE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_LAYER_ID | NUMBER | Y | Cost layer identifier | |
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| LEVEL_TYPE | NUMBER | Y | Level type | |
| ITEM_COST | NUMBER | Y | Elemental item cost at the end of the period | |
| ITEM_BUY_COST | NUMBER | Elemental buy item cost at the end of the period | ||
| ITEM_MAKE_COST | NUMBER | Elemental make item cost at the end of the period | ||
| LAST_UPDATE_DATE | DATE | Y | Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Who column | |
| CREATION_DATE | DATE | Y | Who column | |
| CREATED_BY | NUMBER | Y | Who column | |
| REQUEST_ID | NUMBER | Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Who column | ||
| PROGRAM_ID | NUMBER | Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Who column | ||
| ITEM_BALANCE | NUMBER | Total Item balance in PAC period | ||
| BUY_BALANCE | NUMBER | Item buy balance in the PAC period | ||
| MAKE_BALANCE | NUMBER | Item make balance in the PAC period |
BOM.CST_PAC_ITEM_COST_DETAILS does not reference any database object
BOM.CST_PAC_ITEM_COST_DETAILS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_PAC_ITEM_COST_DETAILS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_PAC_ITEM_COST_DETAILS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEVEL_TYPE | NUMBER | Y | Level Type | |
| COST_LAYER_ID | NUMBER | Y | Cost Layer Identifier | |
| ITEM_MAKE_COST | NUMBER | Item Make Cost | ||
| COST_ELEMENT_ID | NUMBER | Y | Cost Element Identifier | |
| ITEM_BUY_COST | NUMBER | Item Buy Cost | ||
| ITEM_COST | NUMBER | Y | Item Cost | |
| SET_OF_BOOKS_ID | NUMBER | Set of books identifier |
BOM.CST_PAC_ITEM_COST_DETAILS_EFC does not reference any database object
BOM.CST_PAC_ITEM_COST_DETAILS_EFC is referenced by following:
| Description: | CST_PAC_ITMS_ABSL_CODES is used in the Absorption Cost Rollup process of PACP |
|---|
CST_PAC_ITMS_ABSL_CODES is used in the Absorption Cost Rollup process of Periodic Absorption Cost Processor
Table contains Absorption Hierarchy Level Code for each inventory item in a given pac period.
Absorption Hierarchy Level Code is used to retrieve the items inorder to process the PAC transactions to make sure that the cost of the assembled items are completely absorbed with the rollup costs from all of its child items.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_ITMS_ABSL_CODES_U1 | UNIQUE | APPS_TS_TX_IDX |
PAC_PERIOD_ID
INVENTORY_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PAC_PERIOD_ID | NUMBER | Y | PAC Period Identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item Identifier | |
| ABSORPTION_LEVEL_CODE | NUMBER | Y | Absorption Level Code used in Absorption Cost Rollup Process | |
| PROCESS_FLAG | VARCHAR2 | (1) | Process Flag to identify whether an item is processed or not |
BOM.CST_PAC_ITMS_ABSL_CODES does not reference any database object
BOM.CST_PAC_ITMS_ABSL_CODES is referenced by following:
| Description: | Stores low level codes for items for a given period and organization cost group. |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_PAC_LOW_LEVEL_CODES.PAC_PERIOD_ID | CST_PAC_PERIODS |
| CST_PAC_LOW_LEVEL_CODES.COST_GROUP_ID | CST_COST_GROUPS |
CST_PAC_LOW_LEVEL_CODES stores low level codes for items for a given period and organization cost group in Periodic Costing.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_LOW_LEVEL_CODES_N1 | NONUNIQUE | APPS_TS_TX_IDX |
PAC_PERIOD_ID
COST_GROUP_ID LOW_LEVEL_CODE |
| CST_PAC_LOW_LEVEL_CODES_N2 | NONUNIQUE | APPS_TS_TX_IDX |
INVENTORY_ITEM_ID
PAC_PERIOD_ID COST_GROUP_ID LOW_LEVEL_CODE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PAC_PERIOD_ID | NUMBER | Y | Period Identifier | |
| COST_GROUP_ID | NUMBER | Y | Cost Group Identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Item Identifier | |
| LOW_LEVEL_CODE | NUMBER | Y | Low level code | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| REQUEST_ID | NUMBER | Extended Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Extended Who column | ||
| PROGRAM_ID | NUMBER | Extended Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Extended Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column |
BOM.CST_PAC_LOW_LEVEL_CODES does not reference any database object
BOM.CST_PAC_LOW_LEVEL_CODES is referenced by following:
| Description: | Holds information about periodic costing open and closed periods for each legal entity. |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_PAC_PERIODS.LEGAL_ENTITY | HR_ALL_ORGANIZATION_UNITS |
| CST_PAC_PERIODS.COST_TYPE_ID | CST_COST_TYPES |
|
CST_PAC_PERIODS.PERIOD_SET_NAME
CST_PAC_PERIODS.PERIOD_NAME |
GL_PERIODS |
| Foreign Key Column | Foreign Table |
|---|---|
| CST_AE_HEADERS.PERIOD_ID | CST_PAC_PERIODS |
| CST_PAC_EXPLOSION_TEMP.PAC_PERIOD_ID | CST_PAC_PERIODS |
| CST_PAC_ITEM_COSTS.PAC_PERIOD_ID | CST_PAC_PERIODS |
| CST_PAC_LOW_LEVEL_CODES.PAC_PERIOD_ID | CST_PAC_PERIODS |
| CST_PAC_PROCESS_PHASES.PAC_PERIOD_ID | CST_PAC_PERIODS |
| CST_PAC_QUANTITY_LAYERS.PAC_PERIOD_ID | CST_PAC_PERIODS |
| CST_RCV_ACQ_COSTS.PERIOD_ID | CST_PAC_PERIODS |
| MTL_PAC_ACTUAL_COST_DETAILS.PAC_PERIOD_ID | CST_PAC_PERIODS |
| MTL_PAC_COST_SUBELEMENTS.PAC_PERIOD_ID | CST_PAC_PERIODS |
| MTL_PAC_TXN_COST_DETAILS.PAC_PERIOD_ID | CST_PAC_PERIODS |
| WIP_PAC_ACTUAL_COST_DETAILS.PAC_PERIOD_ID | CST_PAC_PERIODS |
| WIP_PAC_PERIOD_BALANCES.PAC_PERIOD_ID | CST_PAC_PERIODS |
CST_PAC_PERIODS holds information about periodic costing open and closed periods for each legal entity and organization cost groups combination.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_PERIODS_U1 | UNIQUE | APPS_TS_TX_IDX | PAC_PERIOD_ID |
| CST_PAC_PERIODS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
LEGAL_ENTITY
COST_TYPE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PAC_PERIOD_ID | NUMBER | Y | Periodic Costing Period Identifier | |
| LEGAL_ENTITY | NUMBER | (15) | Y | Legal Entity Identifier |
| COST_TYPE_ID | NUMBER | Y | Cost Type Identifier | |
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Calendar associated with Set of Books |
| PERIOD_START_DATE | DATE | Y | Period Start Date | |
| PERIOD_END_DATE | DATE | Y | Period End Date | |
| OPEN_FLAG | VARCHAR2 | (1) | Y | Flag to denote whether period is in open, close or error status |
| PERIOD_YEAR | NUMBER | Y | Period Year | |
| PERIOD_NUM | NUMBER | Y | Period Number | |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| PERIOD_CLOSE_DATE | DATE | Period Close Date | ||
| LAST_UPDATE_DATE | DATE | Y | Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Who column | |
| CREATION_DATE | DATE | Y | Who column | |
| CREATED_BY | NUMBER | Y | Who column | |
| REQUEST_ID | NUMBER | Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Who column | ||
| PROGRAM_ID | NUMBER | Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Who column |
BOM.CST_PAC_PERIODS does not reference any database object
BOM.CST_PAC_PERIODS is referenced by following:
| Description: | PAC period balances for transaction categories |
|---|
This table is used to store the transaction category level & cumulative
quantity, balance information for each item transacted in the current PAC Period.
Values are stored at Cost elemental level granularity. The table also acts as a direct
input for the Periodic Item Cost Change report.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_PERIOD_BALANCES_N1 | NONUNIQUE | APPS_TS_TX_IDX |
PAC_PERIOD_ID
COST_GROUP_ID TXN_CATEGORY |
| CST_PAC_PERIOD_BALANCES_N2 | NONUNIQUE | APPS_TS_TX_IDX | COST_LAYER_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PAC_PERIOD_ID | NUMBER | Y | PAC Period ID | |
| COST_GROUP_ID | NUMBER | Y | Cost Group ID | |
| INVENTORY_ITEM_ID | NUMBER | Y | Transaction Item ID | |
| COST_LAYER_ID | NUMBER | Y | Cost Layer ID | |
| QUANTITY_LAYER_ID | NUMBER | Y | Quantity Layer ID | |
| COST_ELEMENT_ID | NUMBER | Y | Cost Element ID | |
| LEVEL_TYPE | NUMBER | Y | Level Type | |
| TXN_CATEGORY | NUMBER | Y | Transaction Category | |
| TXN_CATEGORY_QTY | NUMBER | Cumulative Quantity for this transaction Category | ||
| TXN_CATEGORY_VALUE | NUMBER | Cumulative transaction value for this transaction category | ||
| PERIOD_QUANTITY | NUMBER | Cumulative quantity for the period (across transaction categories) | ||
| PERIODIC_COST | NUMBER | Periodic Cost after processing this transaction category | ||
| PERIOD_BALANCE | NUMBER | Cumulative balance for the period (across transaction categories) | ||
| VARIANCE_AMOUNT | NUMBER | Cumulative Variance for this transaction category | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| REQUEST_ID | NUMBER | Standard Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who Column | ||
| PROGRAM_ID | NUMBER | Standard Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who Column |
BOM.CST_PAC_PERIOD_BALANCES does not reference any database object
BOM.CST_PAC_PERIOD_BALANCES is referenced by following:
| Description: | Holds the status for each process phase in a particular period and organization cost group |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_PAC_PROCESS_PHASES.PAC_PERIOD_ID | CST_PAC_PERIODS |
| CST_PAC_PROCESS_PHASES.COST_GROUP_ID | CST_COST_GROUPS |
CST_PAC_PROCESS_PHASES table holds the status for each process phase in a particular period and organization cost group. The process status is updated by the Periodic Cost Processor accordingly, while doing the processing.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_PROCESS_PHASES_U1 | UNIQUE | APPS_TS_TX_IDX |
PAC_PERIOD_ID
COST_GROUP_ID PROCESS_PHASE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PAC_PERIOD_ID | NUMBER | Y | Period Identifier | |
| COST_GROUP_ID | NUMBER | Y | Cost Group Identifier | |
| PROCESS_PHASE | NUMBER | Y | Phase identifier for Periodic Cost Processing | |
| PROCESS_STATUS | NUMBER | Y | Processing Status for each phase | |
| PROCESS_DATE | DATE | Date of the last status change | ||
| LAST_UPDATE_DATE | DATE | Y | Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Who column | |
| CREATION_DATE | DATE | Y | Who column | |
| CREATED_BY | NUMBER | Y | Who column | |
| REQUEST_ID | NUMBER | Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Who column | ||
| PROGRAM_ID | NUMBER | Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Who column | ||
| PROCESS_UPTO_DATE | DATE | Stores the run until date for partial period run |
BOM.CST_PAC_PROCESS_PHASES does not reference any database object
BOM.CST_PAC_PROCESS_PHASES is referenced by following:
| Description: | Stores the layer quantity of an item by period for periodic costing |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_PAC_QUANTITY_LAYERS.COST_LAYER_ID | CST_PAC_ITEM_COSTS |
| CST_PAC_QUANTITY_LAYERS.PAC_PERIOD_ID | CST_PAC_PERIODS |
| CST_PAC_QUANTITY_LAYERS.COST_GROUP_ID | CST_COST_GROUPS |
CST_PAC_QUANTITY_LAYERS stores the layer quantity of an item by period.
The QUANTITY_LAYER_ID is unique for a period and cost layer combination. In the periodic LIFO method, multiple layers may exist in the same period. In the case of periodic weighted average costing method, only one layer exists in each period.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_QUANTITY_LAYERS_U1 | UNIQUE | APPS_TS_TX_IDX |
QUANTITY_LAYER_ID
COST_LAYER_ID |
| CST_PAC_QUANTITY_LAYERS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
PAC_PERIOD_ID
COST_GROUP_ID INVENTORY_ITEM_ID |
| CST_PAC_QUANTITY_LAYERS_N2 | NONUNIQUE | APPS_TS_TX_IDX | COST_LAYER_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| QUANTITY_LAYER_ID | NUMBER | Y | Quantity layer identifier | |
| COST_LAYER_ID | NUMBER | Y | Cost layer identifier | |
| PAC_PERIOD_ID | NUMBER | Y | Period Identifier | |
| COST_GROUP_ID | NUMBER | Y | Cost group identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Item identifier | |
| LAYER_QUANTITY | NUMBER | Quantity at the given layer | ||
| LAST_UPDATE_DATE | DATE | Y | Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Who column | |
| CREATION_DATE | DATE | Y | Who column | |
| CREATED_BY | NUMBER | Y | Who column | |
| REQUEST_ID | NUMBER | Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Who column | ||
| PROGRAM_ID | NUMBER | Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Who column | ||
| BEGIN_LAYER_QUANTITY | NUMBER | Layer quantity at the period beginning |
BOM.CST_PAC_QUANTITY_LAYERS does not reference any database object
BOM.CST_PAC_QUANTITY_LAYERS is referenced by following:
| Description: | Stores periodic balance of all WIP entities within a cost group by period for BOM based algo Cost Types |
|---|
Stores the WIP balances for all entities within a cost group by period. Values are stored by WIP_ENTITY_ID, LINE_ID,OPERATION_SEQ_NUM and INVENTORY_ITEM_ID (component).
Applied_Value represent value charged to the entity by Component and Applied_Quantity represent quantity charged to the entity by Component.
Relieved_Value represent value relieved from the entity of component by scrap/completions and Relieved_Quantity represent quantity relieved from the entity of component by scrap/completions.
material_variance represent the difference between Applied_Value and Relieved_Value.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PAC_REQ_OPR_COST_DTLS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
PAC_PERIOD_ID
COST_GROUP_ID WIP_ENTITY_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PAC_PERIOD_ID | NUMBER | Y | PAC Period ID | |
| COST_GROUP_ID | NUMBER | Y | Cost Group ID | |
| WIP_ENTITY_ID | NUMBER | Y | WIP ENTITY ID | |
| LINE_ID | NUMBER | LINE ID | ||
| OPERATION_SEQ_NUM | NUMBER | Operation Sequence Number | ||
| INVENTORY_ITEM_ID | NUMBER | Component Id | ||
| COST_ELEMENT_ID | NUMBER | Y | Cost Element Id | |
| APPLIED_VALUE | NUMBER | Applied Value to the Job | ||
| APPLIED_QUANTITY | NUMBER | Applied Component Qty | ||
| RELIEVED_VALUE | NUMBER | Relieved Value | ||
| RELIEVED_QUANTITY | NUMBER | Relieved Quantity | ||
| COMP_VARIANCE | NUMBER | Comp variance | ||
| LAST_UPDATE_DATE | DATE | Standard Who Column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| REQUEST_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| TEMP_RELIEVED_VALUE | NUMBER | Temp Relieved Value |
BOM.CST_PAC_REQ_OPER_COST_DETAILS does not reference any database object
BOM.CST_PAC_REQ_OPER_COST_DETAILS is referenced by following:
| Description: | Periodic Item Cost Details Interface Table |
|---|
CST_PL_COST_DET_INTERFACE is an open interface table used for importing periodic cost details.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PC_COST_DET_INTERFACE_U1 | UNIQUE | APPS_TS_INTERFACE | INTERFACE_LINE_ID |
| CST_PC_COST_DET_INTERFACE_N1 | NONUNIQUE | APPS_TS_INTERFACE | INTERFACE_HEADER_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INTERFACE_LINE_ID | NUMBER | Y | Interface Line Identifier | |
| INTERFACE_HEADER_ID | NUMBER | Y | Interface Header Identifier | |
| COST_ELEMENT_ID | NUMBER | Y | Cost Element Identifier | |
| LEVEL_TYPE | NUMBER | Y | Level Type | |
| ITEM_COST | NUMBER | Y | Item Cost | |
| PROCESS_FLAG | NUMBER | Y | Process Status Flag | |
| ITEM_BUY_COST | NUMBER | Item Buy Cost | ||
| ITEM_MAKE_COST | NUMBER | Item Make Cost | ||
| COST_LAYER_ID | NUMBER | Cost Layer Identifier | ||
| REFERENCE | VARCHAR2 | (240) | Reference | |
| ERROR_FLAG | NUMBER | Error Status Flag | ||
| ERROR_EXPLANATION | VARCHAR2 | (2000) | Error Explanation | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| REQUEST_ID | NUMBER | Extended Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Extended Who column | ||
| PROGRAM_ID | NUMBER | Extended Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Extended Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column |
BOM.CST_PC_COST_DET_INTERFACE does not reference any database object
BOM.CST_PC_COST_DET_INTERFACE is referenced by following:
| Description: | Periodic Item Cost Header Interface Table |
|---|
CST_PC_ITEM_COST_INTERFACE is an open interface table used for importing periodic costs.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PC_ITEM_COST_INTERFACE_U1 | UNIQUE | APPS_TS_INTERFACE | INTERFACE_HEADER_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INTERFACE_HEADER_ID | NUMBER | Y | Interface Header Identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item Identifier | |
| COST_GROUP | VARCHAR2 | (10) | Y | Cost Group Name |
| COST_TYPE | VARCHAR2 | (10) | Y | Cost Type Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period name |
| PROCESS_FLAG | NUMBER | Y | Process status flag | |
| BEGIN_LAYER_QUANTITY | NUMBER | Y | Period Beginning Layer Quantity | |
| ISSUE_QUANTITY | NUMBER | Issue Quantity | ||
| BUY_QUANTITY | NUMBER | Buy Quantity | ||
| MAKE_QUANTITY | NUMBER | Make Quantity | ||
| INTERFACE_GROUP_ID | NUMBER | Interface Group Identifier | ||
| COST_LAYER_ID | NUMBER | Cost Layer Identifier | ||
| QUANTITY_LAYER_ID | NUMBER | Quantity Layer Identifier | ||
| PAC_PERIOD_ID | NUMBER | Periodic Period Identifier | ||
| COST_GROUP_ID | NUMBER | Cost Group Identifier | ||
| ITEM_COST | NUMBER | Item Cost | ||
| MARKET_VALUE | NUMBER | Market Value | ||
| JUSTIFICATION | VARCHAR2 | (2000) | Justification | |
| BEGIN_ITEM_COST | NUMBER | Period Begin Item Cost | ||
| ITEM_BUY_COST | NUMBER | Item Buy Cost | ||
| ITEM_MAKE_COST | NUMBER | Item Make Cost | ||
| PL_MATERIAL | NUMBER | Previous Level Material Cost | ||
| PL_MATERIAL_OVERHEAD | NUMBER | Previous Level Material Overhead Cost | ||
| PL_RESOURCE | NUMBER | Previous Level Resource Cost | ||
| PL_OUTSIDE_PROCESSING | NUMBER | Previous Level Outside Processing Cost | ||
| PL_OVERHEAD | NUMBER | Previous Level Overhead Cost | ||
| TL_MATERIAL | NUMBER | This Level Material Cost | ||
| TL_MATERIAL_OVERHEAD | NUMBER | This Level Material Overhead Cost | ||
| TL_RESOURCE | NUMBER | This Level Resource Cost | ||
| TL_OUTSIDE_PROCESSING | NUMBER | This Level Outside Processing Cost | ||
| TL_OVERHEAD | NUMBER | This Level Overhead Cost | ||
| PL_ITEM_COST | NUMBER | Previous Level Item Cost | ||
| TL_ITEM_COST | NUMBER | This Level Item Cost | ||
| UNBURDENED_COST | NUMBER | Unburdened Cost | ||
| BURDEN_COST | NUMBER | Burden Cost | ||
| MATERIAL_COST | NUMBER | Material Cost | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material Overhead Cost | ||
| RESOURCE_COST | NUMBER | Resource Cost | ||
| OVERHEAD_COST | NUMBER | Overhead Cost | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside Processing Cost | ||
| REFERENCE | VARCHAR2 | (240) | Reference Flag | |
| ERROR_FLAG | NUMBER | Error Status Flag | ||
| ERROR_EXPLANATION | VARCHAR2 | (2000) | Error Explanation | |
| LOCK_FLAG | NUMBER | Lock Flag | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| REQUEST_ID | NUMBER | Extended Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Extended Who column | ||
| PROGRAM_ID | NUMBER | Extended Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Extended Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| LAYER_QUANTITY | NUMBER | Layer quantity |
BOM.CST_PC_ITEM_COST_INTERFACE does not reference any database object
BOM.CST_PC_ITEM_COST_INTERFACE is referenced by following:
| Description: | CST_PC_TXN_HISTORY stores historical information about transactions processed by the periodic cost processor. |
|---|
CST_PC_TXN_HISTORY stores historical information about transactions processed by the periodic cost processor.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PC_TXN_HISTORY_U1 | UNIQUE | APPS_TS_TX_IDX |
PAC_PERIOD_ID
COST_GROUP_ID TRANSACTION_ID |
| CST_PC_TXN_HISTORY_N1 | NONUNIQUE | APPS_TS_TX_IDX |
INVENTORY_ITEM_ID
PAC_PERIOD_ID COST_GROUP_ID |
| CST_PC_TXN_HISTORY_N2 | NONUNIQUE | APPS_TS_TX_IDX |
PAC_PERIOD_ID
COST_GROUP_ID INVENTORY_ITEM_ID TXN_CATEGORY |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PAC_PERIOD_ID | NUMBER | Y | Period Identifier | |
| COST_GROUP_ID | NUMBER | Y | Cost Group | |
| TRANSACTION_ID | NUMBER | Y | Transaction identifier | |
| PROCESS_SEQ | NUMBER | Y | Sequence in which the transaction was processed | |
| PROCESS_GROUP | NUMBER | Y | Process Group categorization of transaction (For Internal use) | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| TXN_MASTER_QTY | NUMBER | Quantity expressed in the primary UOM of the Master Organization | ||
| PRIOR_COSTED_MASTER_QTY | NUMBER | Pre-transaction costed quantity expressed in the UOM of the master organization | ||
| ACTUAL_COST | NUMBER | Actual Unit Cost | ||
| NEW_COST | NUMBER | New Unit Cost | ||
| PRIOR_COST | NUMBER | Prior Unit Cost | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| REQUEST_ID | NUMBER | Y | Extended Who column | |
| PROGRAM_APPLICATION_ID | NUMBER | Y | Extended Who column | |
| PROGRAM_ID | NUMBER | Y | Extended Who column | |
| PROGRAM_UPDATE_DATE | DATE | Y | Extended Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Y | Extended Who column | |
| TXN_CATEGORY | NUMBER | Transaction Category |
BOM.CST_PC_TXN_HISTORY does not reference any database object
BOM.CST_PC_TXN_HISTORY is referenced by following:
| Description: | This table stores item level period end balances for summarized periods |
|---|
This table stores the result of the period close summarization process enhancement introduced in 11.5.10 (Patchset J). Previously, periods were summarized into MTL_PERIOD_SUMMARY or MTL_PERIOD_CG_SUMMARY. The old and new tables are consolidated under the views MTL_PERIOD_SUMMARY_V and MTL_PERIOD_CG_SUMMARY_V.
In this table, summarization results are stored at the item, cost group and subinventory level for each accounting period and organization combination. The two main results of the summarization are:
1) ACCOUNTED_VALUE - The sum of accounting distributions for the relevant period
2) ROLLBACK_VALUE - The product of the rolled back onhand quantity and cost.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PERIOD_CLOSE_SUMMARY_N1 | NONUNIQUE | APPS_TS_SUMMARY |
ACCT_PERIOD_ID
COST_GROUP_ID INVENTORY_ITEM_ID |
| CST_PERIOD_CLOSE_SUMMARY_N2 | NONUNIQUE | APPS_TS_SUMMARY |
ACCT_PERIOD_ID
SUBINVENTORY_CODE INVENTORY_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCT_PERIOD_ID | NUMBER | (15) | Y | Accounting period identifier |
| ORGANIZATION_ID | NUMBER | (15) | Y | Organization identifier |
| COST_GROUP_ID | NUMBER | (15) | Cost group identifier | |
| SUBINVENTORY_CODE | VARCHAR2 | (10) | Subinventory identifier | |
| INVENTORY_ITEM_ID | NUMBER | (15) | Y | Item identifier |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard WHO column |
| CREATION_DATE | DATE | Y | Standard WHO column | |
| CREATION_BY | NUMBER | (15) | Y | Standard WHO column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Standard WHO column | |
| REQUEST_ID | NUMBER | (15) | Concurrent WHO column | |
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Concurrent WHO column | |
| PROGRAM_ID | NUMBER | (15) | Concurrent WHO column | |
| PROGRAM_UPDATE_DATE | DATE | Concurrent WHO column | ||
| ACCOUNTED_VALUE | NUMBER | Y | The period close value calculated from accounting distributions | |
| ROLLBACK_VALUE | NUMBER | Y | The period close value calculated by rolling back transaction quantity and cost | |
| ROLLBACK_QUANTITY | NUMBER | Y | The period close quantity obtained by rolling back transaction quantity | |
| ROLLBACK_ONHAND_VALUE | NUMBER | Onhand portion of the rollback value | ||
| ROLLBACK_INTRANSIT_VALUE | NUMBER | Intransit portion of the rollback value | ||
| ACCOUNTED_ONHAND_VALUE | NUMBER | Onhand portion of the accounted value | ||
| ACCOUNTED_INTRANSIT_VALUE | NUMBER | Intransit portion of the accounted value | ||
| ONHAND_VALUE_DISCREPANCY | NUMBER | Difference between the rollback onhand value and the accounted onhand value | ||
| INTRANSIT_VALUE_DISCREPANCY | NUMBER | Difference between the rollback intransit value and the accounted intransit value | ||
| CUMULATIVE_ONHAND_MTA | NUMBER | Onhand portion of the cumulative accounting distributions | ||
| CUMULATIVE_INTRANSIT_MTA | NUMBER | Intransit portion of the cumulative accounting distributions |
BOM.CST_PERIOD_CLOSE_SUMMARY does not reference any database object
BOM.CST_PERIOD_CLOSE_SUMMARY is referenced by following:
| Description: | Temporary table used by View WIP Value form |
|---|
CST_PERIOD_VALUE_TEMP is a temporary table used by the
View WIP Value Summary window. It sums up all of the cost in
WIP_PERIOD_BALANCES between two accounting periods that belong to a
specific WIP discrete job or repetitive schedule.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_PERIOD_VALUE_TEMP_N1 | NONUNIQUE | APPS_TS_INTERFACE | SESSION_ID |
| CST_PERIOD_VALUE_TEMP_N2 | NONUNIQUE | APPS_TS_INTERFACE | WIP_ENTITY_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | Y | ORACLE session identifier | |
| WIP_ENTITY_ID | NUMBER | Y | WIP job or repetitive assembly identifier | |
| LINE_ID | NUMBER | WIP repetitive line identifier | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| VALUATION_ACCOUNT | NUMBER | Y | WIP valuation account identifier | |
| TL_VALUE_IN | NUMBER | This level cost incurred | ||
| PL_VALUE_IN | NUMBER | Previous level cost incurred | ||
| TL_VALUE_OUT | NUMBER | This level cost relieved | ||
| PL_VALUE_OUT | NUMBER | Previous level cost relieved | ||
| VALUE_IN | NUMBER | Total cost incurred | ||
| VALUE_OUT | NUMBER | Total cost relieved | ||
| VARIANCE | NUMBER | Total variance | ||
| NET_ACTIVITY | NUMBER | Cost incurred minus cost relieved | ||
| VAR | NUMBER | Total variance |
BOM.CST_PERIOD_VALUE_TEMP does not reference any database object
BOM.CST_PERIOD_VALUE_TEMP is referenced by following:
| Description: | Period End Accruals transaction specific temporary table |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SHIPMENT_ID | NUMBER | Y | PO Shipment Identifier | |
| DISTRIBUTION_ID | NUMBER | Y | PO Distribution Identifier | |
| CATEGORY_ID | NUMBER | Item Category Identifier | ||
| MATCH_OPTION | VARCHAR2 | (1) | Match Option | |
| QUANTITY_RECEIVED | NUMBER | Amount or quantity received | ||
| QUANTITY_BILLED | NUMBER | Amount or quantity invoiced | ||
| ACCRUAL_QUANTITY | NUMBER | Accrual quantity | ||
| ENCUM_QUANTITY | NUMBER | Encumbrance quantity | ||
| UNIT_PRICE | NUMBER | Distribution unit price | ||
| ACCRUAL_AMOUNT | NUMBER | Accrual amount | ||
| ENCUM_AMOUNT | NUMBER | Encumbrance amount | ||
| CURRENCY_CODE | VARCHAR2 | (15) | Currency code | |
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | Currency conversion rate type | |
| CURRENCY_CONVERSION_RATE | NUMBER | Currency conversion rate | ||
| CURRENCY_CONVERSION_DATE | DATE | Currency conversion date |
BOM.CST_PER_END_ACCRUALS_TEMP does not reference any database object
BOM.CST_PER_END_ACCRUALS_TEMP is referenced by following:
| Description: | Temporary table for use by Cost Collection Manager Concurrent program |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | Transaction Id | ||
| ORGANIZATION_ID | NUMBER | Organization Id | ||
| TRANSACTION_ACTION_ID | NUMBER | Transaction Action Id | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Transaction Source Type Id | ||
| TYPE_CLASS | NUMBER | Class Type | ||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | Project Expenditure Type | |
| TRANSACTION_DATE | DATE | Transaction Date | ||
| PROJECT_ID | NUMBER | Project Id | ||
| TASK_ID | NUMBER | Task Id | ||
| INVENTORY_ITEM_ID | NUMBER | Inventory Item Id | ||
| PRIMARY_QUANTITY | NUMBER | Primary Quantity | ||
| COSTED_FLAG | VARCHAR2 | (1) | Costed Flag | |
| PRIMARY_COST_METHOD | NUMBER | Primary Cost Method | ||
| AVG_RATES_COST_TYPE_ID | NUMBER | Average RatesCost Type Id | ||
| ITEM_DESCRIPTION | VARCHAR2 | (240) | Item Description | |
| COST_GROUP_ID | NUMBER | Cost Group Id | ||
| TRANSFER_COST_GROUP_ID | NUMBER | Transfer Cost Group Id | ||
| TRANSACTION_SOURCE_ID | NUMBER | Transaction Source Id | ||
| TO_PROJECT_ID | NUMBER | TO Project Id | ||
| TO_TASK_ID | NUMBER | TO Task Id | ||
| SOURCE_PROJECT_ID | NUMBER | Source Project Id | ||
| SOURCE_TASK_ID | NUMBER | Source Task Id | ||
| TRANSFER_TRANSACTION_ID | NUMBER | Transfer Transaction Id | ||
| ACCT_PERIOD_ID | NUMBER | Accounting Period Id | ||
| EXP_ORG_ID | NUMBER | Expenditure Organization Id | ||
| DISTRIBUTION_ACCOUNT_ID | NUMBER | Distribution Account Id | ||
| PM_COST_COLLECTOR_GROUP_ID | NUMBER | Cost Collection Group Id | ||
| SI_ASSET_YES_NO | NUMBER | Asset Subinventory or not | ||
| TRANSFER_SI_ASSET_YES_NO | NUMBER | Transfer transactions subinventory is asset or not | ||
| PM_COST_COLLECTED | VARCHAR2 | (1) | Flag to indicate whether the transaction has been cost collected | |
| SUBINVENTORY_CODE | VARCHAR2 | (10) | Subinventory Code | |
| TRANSFER_SUBINVENTORY | VARCHAR2 | (10) | Transfer transaction subinventory code | |
| TRANSFER_ORGANIZATION_ID | NUMBER | Transfer Transaction Organization Id | ||
| INVENTORY_ASSET_FLAG | VARCHAR2 | (1) | Flag to indicate Asset Item | |
| FLOW_SCHEDULE | VARCHAR2 | (1) | Flow Schedule Transaction |
BOM.CST_PM_MATL_TXNS_TEMP does not reference any database object
BOM.CST_PM_MATL_TXNS_TEMP is referenced by following:
| Description: | Stores cost information for each layer |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
|
CST_QUANTITY_LAYERS.INVENTORY_ITEM_ID
CST_QUANTITY_LAYERS.ORGANIZATION_ID |
MTL_SYSTEM_ITEMS_B |
| Foreign Key Column | Foreign Table |
|---|---|
| CST_LAYER_COST_DETAILS.LAYER_ID | CST_QUANTITY_LAYERS |
CST_QUANTITY_LAYERS stores item average cost information by cost layer. This table is only used for average costing organizations.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_QUANTITY_LAYERS_U1 | UNIQUE | APPS_TS_TX_IDX | LAYER_ID |
| CST_QUANTITY_LAYERS_U2 | UNIQUE | APPS_TS_TX_IDX |
INVENTORY_ITEM_ID
ORGANIZATION_ID COST_GROUP_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LAYER_ID | NUMBER | Y | Unique layer identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who column | ||
| PROGRAM_ID | NUMBER | Standard Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who column | ||
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Item identifier | |
| LAYER_QUANTITY | NUMBER | Y | Costed quantity for this particular layer | |
| CREATE_TRANSACTION_ID | NUMBER | Transaction which created this layer | ||
| UPDATE_TRANSACTION_ID | NUMBER | Last transaction to update this layer | ||
| PL_MATERIAL | NUMBER | Previous level material cost | ||
| PL_MATERIAL_OVERHEAD | NUMBER | Previous level material overhead cost | ||
| PL_RESOURCE | NUMBER | Previous level resource cost | ||
| PL_OUTSIDE_PROCESSING | NUMBER | Previous level outside processing cost | ||
| PL_OVERHEAD | NUMBER | Previous level overhead cost | ||
| TL_MATERIAL | NUMBER | This level material cost | ||
| TL_MATERIAL_OVERHEAD | NUMBER | This level material overhead cost | ||
| TL_RESOURCE | NUMBER | This level resource cost | ||
| TL_OUTSIDE_PROCESSING | NUMBER | This level outside processing cost | ||
| TL_OVERHEAD | NUMBER | This level overhead cost | ||
| MATERIAL_COST | NUMBER | Material cost | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material overhead cost | ||
| RESOURCE_COST | NUMBER | Resource cost | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside processing cost | ||
| OVERHEAD_COST | NUMBER | Overhead cost | ||
| PL_ITEM_COST | NUMBER | Previous level item cost | ||
| TL_ITEM_COST | NUMBER | This level item cost | ||
| ITEM_COST | NUMBER | Y | Layer item cost | |
| UNBURDENED_COST | NUMBER | Item unit cost minus this level material overhead | ||
| BURDEN_COST | NUMBER | This level material overhead | ||
| COST_GROUP_ID | NUMBER | Y | Cost group identifier |
BOM.CST_QUANTITY_LAYERS does not reference any database object
BOM.CST_QUANTITY_LAYERS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_QUANTITY_LAYERS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_QUANTITY_LAYERS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_COST | NUMBER | Resource Cost | ||
| PL_ITEM_COST | NUMBER | Previous Level Item Cost | ||
| PL_RESOURCE | NUMBER | Previous Level Resource | ||
| UNBURDENED_COST | NUMBER | Unburdened Cost | ||
| TL_ITEM_COST | NUMBER | This Level Item Cost | ||
| OVERHEAD_COST | NUMBER | Overhead Cost | ||
| ITEM_COST | NUMBER | Y | Item Cost | |
| MATERIAL_COST | NUMBER | Material Cost | ||
| TL_RESOURCE | NUMBER | This Level Resource | ||
| LAYER_ID | NUMBER | Y | Layer Identifier | |
| PL_OVERHEAD | NUMBER | Previous Level Overhead | ||
| PL_MATERIAL | NUMBER | Previous Level Material | ||
| TL_OVERHEAD | NUMBER | This Level Overhead | ||
| TL_MATERIAL | NUMBER | This Level Material | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside Processing Cost | ||
| PL_OUTSIDE_PROCESSING | NUMBER | Previous Level Outside Processing | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material Overhead Cost | ||
| PL_MATERIAL_OVERHEAD | NUMBER | Previous Level Material Overhead | ||
| BURDEN_COST | NUMBER | Burden Cost | ||
| TL_OUTSIDE_PROCESSING | NUMBER | This Level Outside Processing | ||
| TL_MATERIAL_OVERHEAD | NUMBER | This Level Material Overhead | ||
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.CST_QUANTITY_LAYERS_EFC does not reference any database object
BOM.CST_QUANTITY_LAYERS_EFC is referenced by following:
| Description: | Stores acquisition cost per period, organization cost group for periodic costing |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_RCV_ACQ_COSTS.COST_GROUP_ID | CST_COST_GROUPS |
| CST_RCV_ACQ_COSTS.COST_TYPE_ID | CST_COST_TYPES |
| CST_RCV_ACQ_COSTS.PERIOD_ID | CST_PAC_PERIODS |
| CST_RCV_ACQ_COSTS.RCV_TRANSACTION_ID | RCV_TRANSACTIONS |
| Foreign Key Column | Foreign Table |
|---|---|
| CST_RCV_ACQ_COST_DETAILS.HEADER_ID | CST_RCV_ACQ_COSTS |
Stores Periodic Acquisition Cost Summary for each receipt for an organization cost group and cost type
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_RCV_ACQ_COSTS_U1 | UNIQUE | APPS_TS_TX_IDX | HEADER_ID |
| CST_RCV_ACQ_COSTS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
COST_GROUP_ID
COST_TYPE_ID RCV_TRANSACTION_ID |
| CST_RCV_ACQ_COSTS_N2 | NONUNIQUE | APPS_TS_TX_IDX |
PERIOD_ID
COST_GROUP_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| HEADER_ID | NUMBER | Y | Unique Identifier | |
| COST_GROUP_ID | NUMBER | Y | Cost Group Identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost Type Identifier | |
| PERIOD_ID | NUMBER | Y | Period (for the Cost Type) of the receipt | |
| RCV_TRANSACTION_ID | NUMBER | Y | Receipt Identifier from RCV_TRANSACTIONS | |
| NET_QUANTITY_RECEIVED | NUMBER | Net Quantity Received (net of corrections and returns) | ||
| TOTAL_QUANTITY_INVOICED | NUMBER | Sum of the quantity invoiced for the invoices matched to the receipt | ||
| QUANTITY_AT_PO_PRICE | NUMBER | Portion of the Net Quantity Received that was not Invoiced (and is costed at the PO Price) | ||
| TOTAL_INVOICE_AMOUNT | NUMBER | Sum of the Invoice Amounts for the Invoices matched to the Receipt | ||
| AMOUNT_AT_PO_PRICE | NUMBER | Amount derived using Uninvoiced Quantity at PO Price | ||
| TOTAL_AMOUNT | NUMBER | Sum of the Invoice Amount and PO Amount | ||
| COSTED_QUANTITY | NUMBER | Quantity used to compute the per unit Acquisition Cost. This will be the Net Quantity Received or the Total Quantity Invoiced, whichever is greater | ||
| ACQUISITION_COST | NUMBER | Per Unit Periodic Acquisition Cost | ||
| PO_LINE_LOCATION_ID | NUMBER | Shipment Line Number for the receipt | ||
| PO_UNIT_PRICE | NUMBER | Per Unit PO price inclusive of non recoverable tax, based on primary UOM of the item | ||
| PRIMARY_UOM | VARCHAR2 | (3) | Per Unit PO price inclusive of non recoverable tax, based on primary UOM of the item | |
| REC_EXCHG_RATE | NUMBER | Currency Conversion rate. | ||
| LAST_UPDATE_DATE | DATE | Y | Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Who column | |
| CREATION_DATE | DATE | Y | Who column | |
| CREATED_BY | NUMBER | Y | Who column | |
| REQUEST_ID | NUMBER | Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Who column | ||
| PROGRAM_ID | NUMBER | Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Who column |
BOM.CST_RCV_ACQ_COSTS does not reference any database object
BOM.CST_RCV_ACQ_COSTS is referenced by following:
| Description: | This table stores the header information for the Periodic Acquisition Cost Adjustment process |
|---|
This table stores the header ID and other information at the header level for the Periodic Cost Adjustment process. It also stores the MMT transaction ID if there is a Periodic Cost update transaction created in MMT. The child table to this table is the CST_RCV_ACQ_COST_DETAILS_ADJ table.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_RCV_ACQ_COSTS_ADJ_U1 | UNIQUE | APPS_TS_TX_IDX | HEADER_ID |
| CST_RCV_ACQ_COSTS_ADJ_N1 | NONUNIQUE | APPS_TS_TX_IDX |
COST_GROUP_ID
COST_TYPE_ID RCV_TRANSACTION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| HEADER_ID | NUMBER | Y | Header ID for each row | |
| COST_GROUP_ID | NUMBER | Y | Cost Group ID that refers to the Cost Group | |
| COST_TYPE_ID | NUMBER | Y | Cost Type ID that refers to the Cost Type | |
| PERIOD_ID | NUMBER | Y | The PAC Period ID | |
| RCV_TRANSACTION_ID | NUMBER | Y | The Transaction ID of the parent Receipt | |
| NET_QUANTITY_RECEIVED | NUMBER | The Net quantity Received for the receipt | ||
| TOTAL_QUANTITY_INVOICED | NUMBER | Total Quantity Invoiced | ||
| QUANTITY_AT_PO_PRICE | NUMBER | The quantity considered for acquisition cost at PO price | ||
| TOTAL_INVOICE_AMOUNT | NUMBER | The Total Invoice Amount | ||
| AMOUNT_AT_PO_PRICE | NUMBER | The Total amount at PO price | ||
| TOTAL_AMOUNT | NUMBER | Sum of Invoiced amount and amount at PO Price | ||
| COSTED_QUANTITY | NUMBER | The total costed quantity considered for the Acquisition Cost | ||
| ACQUISITION_COST | NUMBER | The Acquisition Cost for the item | ||
| PO_LINE_LOCATION_ID | NUMBER | The Purchase order line location ID | ||
| PO_UNIT_PRICE | NUMBER | The unit price on the PO | ||
| PRIMARY_UOM | VARCHAR2 | (3) | The primary unit of measure | |
| REC_EXCHG_RATE | NUMBER | The exchange rate | ||
| LAST_UPDATE_DATE | DATE | Y | Last Update Date | |
| LAST_UPDATED_BY | NUMBER | Y | Last Updated By | |
| CREATION_DATE | DATE | Y | Creation Date | |
| CREATED_BY | NUMBER | Y | Created By | |
| REQUEST_ID | NUMBER | Request ID of the Periodic Acquisition Cost adjustment process | ||
| PROGRAM_APPLICATION_ID | NUMBER | The Program Application ID | ||
| PROGRAM_ID | NUMBER | The Program ID | ||
| PROGRAM_UPDATE_DATE | DATE | Program Update Date | ||
| LAST_UPDATE_LOGIN | NUMBER | The last Update Login ID | ||
| MMT_TRANSACTION_ID | NUMBER | The transaction ID of the Update transaction in MMT |
BOM.CST_RCV_ACQ_COSTS_ADJ does not reference any database object
BOM.CST_RCV_ACQ_COSTS_ADJ is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_RCV_ACQ_COSTS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_RCV_ACQ_COSTS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| AMOUNT_AT_PO_PRICE | NUMBER | Amount At PO Price | ||
| PO_UNIT_PRICE | NUMBER | PO Unit Price | ||
| ACQUISITION_COST | NUMBER | Acquisition Cost | ||
| REC_EXCHG_RATE | NUMBER | Currency Conversion rate. | ||
| TOTAL_INVOICE_AMOUNT | NUMBER | Total Invoice Amount | ||
| HEADER_ID | NUMBER | Y | Header Identifier | |
| TOTAL_AMOUNT | NUMBER | Total Amount | ||
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.CST_RCV_ACQ_COSTS_EFC does not reference any database object
BOM.CST_RCV_ACQ_COSTS_EFC is referenced by following:
| Description: | Stores detailed acquisition cost per period, organization cost group. |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_RCV_ACQ_COST_DETAILS.HEADER_ID | CST_RCV_ACQ_COSTS |
| CST_RCV_ACQ_COST_DETAILS.PO_LINE_LOCATION_ID | PO_LINES_ALL |
CST_RCV_ACQ_COST_DETAILS stores periodic acquisition cost details for each receipt for an organization cost group and cost type.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_RCV_ACQ_COST_DETAILS_U1 | UNIQUE | APPS_TS_TX_IDX | DETAIL_ID |
| CST_RCV_ACQ_COST_DETAILS_N1 | NONUNIQUE | APPS_TS_TX_IDX | HEADER_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| HEADER_ID | NUMBER | Y | Header Identifier from CST_RCV_ACQ_COSTS | |
| DETAIL_ID | NUMBER | Y | Unique Identifier | |
| SOURCE_TYPE | VARCHAR2 | (10) | Source of the line (INVOICE or PO) | |
| PO_LINE_LOCATION_ID | NUMBER | Source Shipment ID if source is PO | ||
| PARENT_DISTRIBUTION_ID | NUMBER | Invoice Distribution Identifier for the parent distribution (if the source is INVOICE) | ||
| DISTRIBUTION_NUM | NUMBER | Serial Number of the distributions which make up the Acquisition Cost (if the source is INVOICE) | ||
| LEVEL_NUM | NUMBER | Level in the hierarchy of the special charge allocations (if the source is INVOICE) | ||
| INVOICE_DISTRIBUTION_ID | NUMBER | (15) | Source Invoice Distribution Identifier (if the source is INVOICE) | |
| PARENT_INVOICE_DIST_ID | NUMBER | Immediate Parent Invoice Distribution Identifier (if source is INVOICE) | ||
| ALLOCATED_AMOUNT | NUMBER | Whole or portion of the parent invoice distribution amount | ||
| PARENT_AMOUNT | NUMBER | Immediate Parent Invoice Distribution Amount | ||
| AMOUNT | NUMBER | Whole or portion of the Allocated Amount | ||
| QUANTITY | NUMBER | Invoice Quantity if source is INVOICE, Uninvoiced quantity if source is PO | ||
| PRICE | NUMBER | Invoice Price if source is INVOICE, PO Price if source is PO | ||
| LINE_TYPE | VARCHAR2 | (25) | Invoice Distribution Line Type (if source is INVOICE) | |
| LAST_UPDATE_DATE | DATE | Y | Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Who column | |
| CREATION_DATE | DATE | Y | Who column | |
| CREATED_BY | NUMBER | Y | Who column | |
| REQUEST_ID | NUMBER | Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Who column | ||
| PROGRAM_ID | NUMBER | Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Who column |
BOM.CST_RCV_ACQ_COST_DETAILS does not reference any database object
BOM.CST_RCV_ACQ_COST_DETAILS is referenced by following:
| Description: | This table hold the details for the Periodic Acquisition Cost Adjustment Process |
|---|
This table holds the details for the Periodic Acquisition Cost adjustment process. Details for every invoice distribution is inserted into this table in a hierarchical fashion. There may be a row inserted for the source type PO if there was a partial invoice on the receipt.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_RCV_ACQ_COST_DTLS_ADJ_N1 | NONUNIQUE | APPS_TS_TX_IDX |
HEADER_ID
INVOICE_DISTRIBUTION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| HEADER_ID | NUMBER | Y | Header ID referencing the CST_RCV_ACQ_COSTS_ADJ table | |
| DETAIL_ID | NUMBER | Y | Unique Identifier for every detail row | |
| SOURCE_TYPE | VARCHAR2 | (10) | The source type for the detail row | |
| PO_LINE_LOCATION_ID | NUMBER | Source Shipment ID if source is PO | ||
| PARENT_DISTRIBUTION_ID | NUMBER | Invoice Distribution Identifier for the parent distribution | ||
| DISTRIBUTION_NUM | NUMBER | Serial Number of the distributions that make up the Acquisition Cost | ||
| LEVEL_NUM | NUMBER | Level in the hierarchy of the charge allocations | ||
| INVOICE_DISTRIBUTION_ID | NUMBER | (15) | Source Invoice Distribution Identifier | |
| PARENT_INVOICE_DIST_ID | NUMBER | Immediate Parent Invoice Distribution identifier | ||
| ALLOCATED_AMOUNT | NUMBER | Whole or portion of the parent Invoice distribution amount | ||
| PARENT_AMOUNT | NUMBER | Immediate parent invoice distribution amount | ||
| AMOUNT | NUMBER | Whole or portion of the allocated amount | ||
| QUANTITY | NUMBER | Invoice quantity if source is invoice, uninvoiced quantity if source is PO | ||
| PRICE | NUMBER | Invoice price if source is INVOICE, PO price if source is PO | ||
| LINE_TYPE | VARCHAR2 | (25) | Invoice Distribution Line type | |
| LAST_UPDATE_DATE | DATE | Y | Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Who column | |
| CREATION_DATE | DATE | Y | Who column | |
| CREATED_BY | NUMBER | Y | Who column | |
| REQUEST_ID | NUMBER | Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Who column | ||
| PROGRAM_ID | NUMBER | Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Who column |
BOM.CST_RCV_ACQ_COST_DETAILS_ADJ does not reference any database object
BOM.CST_RCV_ACQ_COST_DETAILS_ADJ is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_RCV_ACQ_COST_DETAILS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_RCV_ACQ_COST_DETAILS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PRICE | NUMBER | Price | ||
| AMOUNT | NUMBER | Amount | ||
| ALLOCATED_AMOUNT | NUMBER | Allocated Amount | ||
| PARENT_AMOUNT | NUMBER | Parent Amount | ||
| DETAIL_ID | NUMBER | Y | Detail Identifier | |
| SET_OF_BOOKS_ID | NUMBER | Set Of Books identifier |
BOM.CST_RCV_ACQ_COST_DETAILS_EFC does not reference any database object
BOM.CST_RCV_ACQ_COST_DETAILS_EFC is referenced by following:
| Description: | Stores the build information for the accrual reconciliation load run |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_RECONCILIATION_BUILD.OPERATING_UNIT_ID | HR_ALL_ORGANIZATION_UNITS |
The table will be used to store the build information everytime the accrual reconciliation load run program is executed. The build information is the SRS parameters.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_RECONCILIATION_BUILD_U1 | UNIQUE | APPS_TS_TX_IDX | BUILD_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| BUILD_ID | NUMBER | Y | Build Identifier | |
| OPERATING_UNIT_ID | NUMBER | Y | Operating Unit Identifier | |
| FROM_DATE | DATE | Start Date | ||
| TO_DATE | DATE | End Date | ||
| LAST_UPDATE_DATE | DATE | Standard Who Column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Standard Who Column | ||
| CREATED_BY | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who Column |
BOM.CST_RECONCILIATION_BUILD does not reference any database object
BOM.CST_RECONCILIATION_BUILD is referenced by following:
| Description: |
|---|
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_RECONCILIATION_GTT_N1 | NONUNIQUE |
PO_DISTRIBUTION_ID
ACCRUAL_ACCOUNT_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_DATE | DATE | Y | ||
| AMOUNT | NUMBER | Y | ||
| ENTERED_AMOUNT | NUMBER | |||
| QUANTITY | NUMBER | |||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| CURRENCY_CONVERSION_DATE | DATE | |||
| PO_DISTRIBUTION_ID | NUMBER | Y | ||
| RCV_TRANSACTION_ID | NUMBER | |||
| INVOICE_DISTRIBUTION_ID | NUMBER | |||
| ACCRUAL_ACCOUNT_ID | NUMBER | Y | ||
| TRANSACTION_TYPE_CODE | VARCHAR2 | (25) | Y | |
| INVENTORY_ITEM_ID | NUMBER | |||
| VENDOR_ID | NUMBER | |||
| INVENTORY_ORGANIZATION_ID | NUMBER | |||
| WRITE_OFF_ID | NUMBER | |||
| DESTINATION_TYPE_CODE | VARCHAR2 | (25) | ||
| AE_HEADER_ID | NUMBER | Accounting Header Identifier | ||
| AE_LINE_NUM | NUMBER | Accounting Line Number | ||
| OPERATING_UNIT_ID | NUMBER | Y | ||
| BUILD_ID | NUMBER | Y | ||
| REQUEST_ID | NUMBER | Y |
BOM.CST_RECONCILIATION_GTT does not reference any database object
BOM.CST_RECONCILIATION_GTT is referenced by following:
| Description: | Table to store summary information for related Purchasing and Payables tranactions in Accrual Reconciliation |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_RECONCILIATION_SUMMARY.PO_DISTRIBUTION_ID | PO_DISTRIBUTIONS_ALL |
| CST_RECONCILIATION_SUMMARY.ACCRUAL_ACCOUNT_ID | GL_CODE_COMBINATIONS |
| CST_RECONCILIATION_SUMMARY.VENDOR_ID | PO_VENDORS |
| CST_RECONCILIATION_SUMMARY.OPERATING_UNIT_ID | HR_ALL_ORGANIZATION_UNITS |
Table will be used to store the summary information for related Purchasing and Payables transactions used in the Accrual Reconciliation Process
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_RECONCILIATION_SUMMARY_U1 | UNIQUE | APPS_TS_TX_IDX |
PO_DISTRIBUTION_ID
ACCRUAL_ACCOUNT_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PO_DISTRIBUTION_ID | NUMBER | Y | PO Distribution Identifier | |
| ACCRUAL_ACCOUNT_ID | NUMBER | Y | Accrual Account Identifier | |
| PO_BALANCE | NUMBER | Y | Total Balance of all PO Transactions | |
| AP_BALANCE | NUMBER | Y | Total Balance of all PO Transactions | |
| WRITE_OFF_BALANCE | NUMBER | Y | Total Balance of all Write-Off Transactions | |
| LAST_RECEIPT_DATE | DATE | Date of the Latest Receipt | ||
| LAST_INVOICE_DIST_DATE | DATE | Date of the Latest Invoice | ||
| LAST_WRITE_OFF_DATE | DATE | Date of the Latest Write-Off | ||
| INVENTORY_ITEM_ID | NUMBER | Item Identifier | ||
| VENDOR_ID | NUMBER | Vendor Identifier | ||
| DESTINATION_TYPE_CODE | VARCHAR2 | (25) | Destination Type Identifier | |
| WRITE_OFF_SELECT_FLAG | VARCHAR2 | (1) | Internal Record Selection | |
| OPERATING_UNIT_ID | NUMBER | Y | Operating Unit Identifier | |
| BUILD_ID | NUMBER | Build Identifier | ||
| LAST_UPDATE_DATE | DATE | Standard Who Column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Standard Who Column | ||
| CREATED_BY | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who Column |
BOM.CST_RECONCILIATION_SUMMARY does not reference any database object
BOM.CST_RECONCILIATION_SUMMARY is referenced by following:
| Description: | Column selection option for item cost report |
|---|
CST_REPORT_TYPES stores detail options and all relevant Item Cost
Reports information by cost type. A detail option
specifies how to summarize item costs and which template
to use to display the item costs.
.
REPORT_NAME stores the report name option, for example, 'Element by
Level.' UNIQUE_ID is the unique identifier for REPORT_NAME and is
obtained from sequence CST_REPORT_TYPES_S. USER_DEFINED indicates
whether this is a user-defined option or predefined option. For
customized options, enter 1 for the USER_DEFINED field.
.
There are two different report layouts. COLUMN1_HEADING and
COLUMN2_HEADING stores the first and second column headings for both
layouts.
.
COLUMN1_HEADING and COLUMN2_HEADING hold the source of the cost
information for the report option. For example, for the Element by
Sub-Element report COLUMN1_HEADING uses COST_ELEMENT and
COLUMN2_HEADING uses RESOURCE.
.
FLEXFIELD_APPLICATION_ID and DESCRIPTIVE_FLEXFIELD_NAME store the
application identifier and descriptive flexfield name for reports that
require flexfield segment values and are used to retrieve segments
for the flexfield.
.
INVENTORY_FLAG specifies whether this report is available for a
standalone inventory installation. Some of the detail options are not
available for standalone inventory installations, such as Element by
operation.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_REPORT_TYPES_U1 | UNIQUE | APPS_TS_SEED | UNIQUE_ID |
| CST_REPORT_TYPES_U2 | UNIQUE | APPS_TS_SEED | REPORT_NAME |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| UNIQUE_ID | NUMBER | Y | Unique identifier for report name | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REPORT_NAME | VARCHAR2 | (50) | Y | Report option name |
| REPORT_TITLE | VARCHAR2 | (50) | Y | Report option title |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| USER_DEFINED | NUMBER | Y | Flag to indicate if this is a user-defined or seeded option | |
| COLUMN1_HEADING | VARCHAR2 | (50) | The displayed column heading for the first column | |
| COLUMN2_HEADING | VARCHAR2 | (50) | The displayed column heading for the second column | |
| COLUMN3_HEADING | VARCHAR2 | (50) | Not currently used | |
| COLUMN4_HEADING | VARCHAR2 | (50) | Not currently used | |
| COLUMN1 | VARCHAR2 | (240) | Source of the information for column 1 | |
| COLUMN2 | VARCHAR2 | (240) | Source of the information for column 2 | |
| COLUMN3 | VARCHAR2 | (240) | Not currently used | |
| COLUMN4 | VARCHAR2 | (240) | Not currently used | |
| INVENTORY_FLAG | NUMBER | Flag to indicate if available in standalone inventory installation | ||
| DISABLE_DATE | DATE | Inactive On/After | ||
| FLEXFIELD_APPLICATION_ID | NUMBER | Application identifier | ||
| DESCRIPTIVE_FLEXFIELD_NAME | VARCHAR2 | (150) | Descriptive Flexfield name | |
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column |
BOM.CST_REPORT_TYPES does not reference any database object
BOM.CST_REPORT_TYPES is referenced by following:
| Description: | Resource and outside processing resource cost definition |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_RESOURCE_COSTS.RESOURCE_ID | BOM_RESOURCES |
| CST_RESOURCE_COSTS.COST_TYPE_ID | CST_COST_TYPES |
CST_RESOURCE_COSTS stores resource and outside processing resource
unit costs by cost type.
.
If the resource or outside processing resource has the
FUNCTIONAL_CURRENCY_FLAG set to Yes, you cannot enter a resource rate
in the Resources window.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_RESOURCE_COSTS_U1 | UNIQUE | APPS_TS_TX_IDX |
RESOURCE_ID
COST_TYPE_ID |
| CST_RESOURCE_COSTS_U2 | UNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
COST_TYPE_ID RESOURCE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | Resource identifier (sub element) | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| RESOURCE_RATE | NUMBER | Y | Resource unit cost | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment |
BOM.CST_RESOURCE_COSTS does not reference any database object
BOM.CST_RESOURCE_COSTS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_RESOURCE_COSTS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_RESOURCE_COSTS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_RATE | NUMBER | Y | resource rate | |
| RESOURCE_ID | NUMBER | Y | resource identifier | |
| COST_TYPE_ID | NUMBER | Y | cost type identifier | |
| SET_OF_BOOKS_ID | NUMBER | set of books identifier |
BOM.CST_RESOURCE_COSTS_EFC does not reference any database object
BOM.CST_RESOURCE_COSTS_EFC is referenced by following:
| Description: | Open interface table for resource cost information |
|---|
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Resource Identifier | ||
| RESOURCE_CODE | VARCHAR2 | (20) | Resource code | |
| COST_TYPE_ID | NUMBER | Cost type identifier | ||
| COST_TYPE | VARCHAR2 | (10) | Cost type name | |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| GROUP_ID | NUMBER | Group identifier | ||
| TRANSACTION_ID | NUMBER | Transaction identifier | ||
| PROCESS_FLAG | NUMBER | Indicates at what processing phase this row is in. Must be set to 1 initially | ||
| RESOURCE_RATE | NUMBER | Resource unit cost | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| ERROR_CODE | VARCHAR2 | (240) | Error Code | |
| ERROR_EXPLANATION | VARCHAR2 | (240) | Error Explanation | |
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ERROR_FLAG | VARCHAR2 | (1) | Set to 'E' if there is an error | |
| GROUP_DESCRIPTION | VARCHAR2 | (80) | Description of Group |
BOM.CST_RESOURCE_COSTS_INTERFACE does not reference any database object
BOM.CST_RESOURCE_COSTS_INTERFACE is referenced by following:
| Description: | Resource that an overhead is applied to |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_RESOURCE_OVERHEADS.RESOURCE_ID | BOM_RESOURCES |
| CST_RESOURCE_OVERHEADS.COST_TYPE_ID | CST_COST_TYPES |
| CST_RESOURCE_OVERHEADS.OVERHEAD_ID | BOM_RESOURCES |
CST_RESOURCE_OVERHEADS stores information about resource
overheads. When the Cost Manager invokes the proper cost worker,
based on whether the organization is using average or standard
costing, the information in this table is used to determine the
resource overhead that should be applied. To earn overhead based
on resources, the overhead must be associated with the resource being
transacted and a rate must be defined for the resource for the
department in which the resource is transacted.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_RESOURCE_OVERHEADS_U1 | UNIQUE | APPS_TS_TX_IDX |
RESOURCE_ID
COST_TYPE_ID OVERHEAD_ID |
| CST_RESOURCE_OVERHEADS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
OVERHEAD_ID
COST_TYPE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| RESOURCE_ID | NUMBER | Y | Resource identifier (subelement) | |
| OVERHEAD_ID | NUMBER | Y | Overhead subelement identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment |
BOM.CST_RESOURCE_OVERHEADS does not reference any database object
BOM.CST_RESOURCE_OVERHEADS is referenced by following:
| Description: | Open interface table for resource overhead association information |
|---|
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Reource Identifier | ||
| RESOURCE_CODE | VARCHAR2 | (20) | Resource code | |
| COST_TYPE_ID | NUMBER | Cost type identifier | ||
| COST_TYPE | VARCHAR2 | (10) | Cost type name | |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| OVERHEAD_ID | NUMBER | Overhead Identifier | ||
| OVERHEAD | VARCHAR2 | (30) | Overhead Name | |
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| GROUP_ID | NUMBER | Group identifier | ||
| TRANSACTION_ID | NUMBER | Transaction identifier | ||
| PROCESS_FLAG | NUMBER | Indicates at what processing phase this row is in. Must be set to 1 initially | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| ERROR_CODE | VARCHAR2 | (240) | Error Code | |
| ERROR_EXPLANATION | VARCHAR2 | (240) | Error Explanation | |
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| ERROR_FLAG | VARCHAR2 | (1) | Set to 'E' if there is an error | |
| GROUP_DESCRIPTION | VARCHAR2 | (80) | Description of Group |
BOM.CST_RES_OVERHEADS_INTERFACE does not reference any database object
BOM.CST_RES_OVERHEADS_INTERFACE is referenced by following:
| Description: | Simple table used to keep track of the last successful run of the Generate COGS Events concurrent request. |
|---|
Simple table used to keep track of the last successful run of the Generate COGS Events concurrent request. It starts out empty, and the first run of the request will populate the row which will track all subsequent runs of the request. This row is updated every time phase 2 of the request complete successfully. It is only used in the request parameter form to default the "From Date" of the request, thereby helping the user determine the lower bound of the date range for which to run the request.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CONTROL_ID | NUMBER | Y | Set to 1 for the single row | |
| LAST_PROCESS_UPTO_DATE | DATE | Y | Date of the last successful run of phase 2 of the concurrent request. | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Standard Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who Column | ||
| PROGRAM_ID | NUMBER | Standard Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who Column |
BOM.CST_REVENUE_COGS_CONTROL does not reference any database object
BOM.CST_REVENUE_COGS_CONTROL is referenced by following:
| Description: | For matching COGS to Revenue, stores the relationship between COGS lines (shippable lines) and Revenue Lines (invoicable lines). |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_REVENUE_COGS_MATCH_LINES.PAC_COST_TYPE_ID | CST_COST_TYPES |
| CST_REVENUE_COGS_MATCH_LINES.COGS_ACCT_ID | GL_CODE_COMBINATIONS |
| CST_REVENUE_COGS_MATCH_LINES.DEFERRED_COGS_ACCT_ID | GL_CODE_COMBINATIONS |
| CST_REVENUE_COGS_MATCH_LINES.COGS_OM_LINE_ID | OE_ORDER_LINES_ALL |
| CST_REVENUE_COGS_MATCH_LINES.REVENUE_OM_LINE_ID | OE_ORDER_LINES_ALL |
The primary purpose of this table is to store the relationship between COGS and revenue lines. For standard items this is usually the same line, but for configurations the COGS line is usually a shippable item (such as an included item) and the Revenue line is usually an invoicable item (such as a top model) and the two OM line IDs are many times different. So where the pac_cost_type_ID is NULL this table will have only one row for each COGS_OM_LINE_ID, essentially making it the primary key for non-PAC rows.
The secondary purpose of this table is to store the elemental and total unit costs for the item that is shipped orginially by the sales order issue, as well as the COGS and deferred COGS accounts. Then when costing subsequent events that refer to this original sales order (such as COGS Recognition events and RMA Receipts) these unit costs and accounts are readily available. It's important to store these since the subsequent related events must use the same unit costs and COGS accounts as the original sales issue. The row with NULL pac_cost_type_id stores the perpetual unit costs. PAC rows will populate the PAC_COST_TYPE_ID with the cost type ID so that you can have one row for each PAC cost type and COGS line ID combination.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_REV_COGS_MATCH_LINES_U1 | UNIQUE | APPS_TS_TX_IDX |
COGS_OM_LINE_ID
PAC_COST_TYPE_ID |
| CST_REV_COGS_MATCH_LINES_N1 | NONUNIQUE | APPS_TS_TX_IDX | REVENUE_OM_LINE_ID |
| CST_REV_COGS_MATCH_LINES_N2 | NONUNIQUE | APPS_TS_TX_IDX |
OPERATING_UNIT_ID
SALES_ORDER_ISSUE_DATE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COGS_OM_LINE_ID | NUMBER | Y | Reference to the line ID of the original sales order issue to which this COGS event applies. In Order Management's table: oe_order_lines.line_id. | |
| PAC_COST_TYPE_ID | NUMBER | Each COGS OM LINE ID will have one row where this column is NULL (the perpetual row), and the remaining will have this populated with the Periodic Average Costing Cost Type ID. | ||
| REVENUE_OM_LINE_ID | NUMBER | Y | Stores the OM Line ID that contains the relevant revenue recognition percentage that this COGS Line ID must match with. | |
| DEFERRED_COGS_ACCT_ID | NUMBER | Y | Stores the CCID of the Deferred COGS account which applies to this order line. | |
| COGS_ACCT_ID | NUMBER | Y | Stores the CCID of the COGS account which applies to this order line. | |
| ORGANIZATION_ID | NUMBER | Y | Unique identifier for the inventory organization of the sales order issue. | |
| INVENTORY_ITEM_ID | NUMBER | Y | Unique identifier of the inventory item. | |
| OPERATING_UNIT_ID | NUMBER | Y | Operating unit | |
| COST_GROUP_ID | NUMBER | Cost group in which the original sales order issue was costed | ||
| LEDGER_ID | NUMBER | Y | Ledger identifier | |
| SALES_ORDER_ISSUE_DATE | DATE | Y | Original sales order issue shipment date | |
| UNIT_MATERIAL_COST | NUMBER | Elemental material cost per unit | ||
| UNIT_MOH_COST | NUMBER | Elemental material overhead cost per unit | ||
| UNIT_RESOURCE_COST | NUMBER | Elemental resource cost per unit | ||
| UNIT_OP_COST | NUMBER | Elemental outside processing cost per unit | ||
| UNIT_OVERHEAD_COST | NUMBER | Elemental overhead cost per unit | ||
| UNIT_COST | NUMBER | Total unit cost | ||
| ORIGINAL_SHIPPED_QTY | NUMBER | Quantity shipped for the sales order issue. If the sales issue is composed of multiple MMT transactions, this will contain the total quantity across those transactions. | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Standard Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who Column | ||
| PROGRAM_ID | NUMBER | Standard Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who Column |
BOM.CST_REVENUE_COGS_MATCH_LINES does not reference any database object
BOM.CST_REVENUE_COGS_MATCH_LINES is referenced by following:
| Description: | Stores the latest Revenue Recognition Percentage for a given OM Line ID per accounting period. |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_REVENUE_RECOGNITION_LINES.REVENUE_OM_LINE_ID | OE_ORDER_LINES_ALL |
| CST_REVENUE_RECOGNITION_LINES.CUSTOMER_TRX_LINE_ID | RA_CUSTOMER_TRX_LINES_ALL |
This table is populated with data from Order Management (OM) and Oracle Receivables (AR) about the revenue recognition percentage for a given OM line. AR data is loaded via an API they provide during the 2nd phase of the Generate COGS Recognition Events concurrent request. OM data is loaded via a Costing API that is called by OM when an order line gets closed that was never invoiced (see the functional design for more details). The main purpose of the table is to store a revenue recognition percent for each OM line and accounting period. Thus the primary key of the table is REVENUE_OM_LINE_ID + ACCT_PERIOD_NUM. The Matching program will compare the information in this table with the latest percentage in CST_COGS_EVENTS for each period, and use any differences to build COGS Recognition events.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_REV_REC_LINES_U1 | UNIQUE | APPS_TS_TX_IDX |
REVENUE_OM_LINE_ID
ACCT_PERIOD_NUM |
| CST_REV_REC_LINES_N1 | NONUNIQUE | APPS_TS_TX_IDX | POTENTIALLY_UNMATCHED_FLAG |
| CST_REV_REC_LINES_N2 | NONUNIQUE | APPS_TS_TX_IDX | LEDGER_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| REVENUE_OM_LINE_ID | NUMBER | Y | Order Line from oe_order_lines_all for which a revenue recognition percentage is relevant (determined by whether the line is invoicable or whether it's the top model of a configuration). | |
| ACCT_PERIOD_NUM | NUMBER | Y | Unique representation of an accounting period for a given set of books and application ID. Corresponds to GL_PERIOD_STATUSES.EFFECTIVE_PERIOD_NUM. | |
| POTENTIALLY_UNMATCHED_FLAG | VARCHAR2 | (1) | Indicator that is set to 'Y' whenever an action is taken that may have resulted in a Revenue/COGS mismatch. Cleared to NULL after the concurrent request is run to match revenue and COGS. | |
| REVENUE_RECOGNITION_PERCENT | NUMBER | Y | The latest known revenue recognition percentage for this OM line and accounting period. | |
| LAST_EVENT_DATE | DATE | Y | The GL date corresponding to this revenue recognition percentage. | |
| OPERATING_UNIT_ID | NUMBER | Y | Operating Unit | |
| LEDGER_ID | NUMBER | Y | Ledger identifier | |
| INVENTORY_ITEM_ID | NUMBER | Item unique identifier | ||
| CUSTOMER_TRX_LINE_ID | NUMBER | Invoice line number | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Standard Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Standard Who Column | ||
| PROGRAM_ID | NUMBER | Standard Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Standard Who Column |
BOM.CST_REVENUE_RECOGNITION_LINES does not reference any database object
BOM.CST_REVENUE_RECOGNITION_LINES is referenced by following:
| Description: | Temporary table for rollup identifier for deleting |
|---|
CST_ROLLUP_DELETE_TEMP stores temporary rollup identifiers for the Cost
Rollup process.
.
GROUP_ID is the unique rollup identifier which is used to delete rows
from BOM_EXPLOSION_TEMP.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_ROLLUP_DELETE_TEMP_N1 | NONUNIQUE | APPS_TS_INTERFACE | GROUP_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| GROUP_ID | NUMBER | Y | Rollup identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_ROLLUP_DELETE_TEMP does not reference any database object
BOM.CST_ROLLUP_DELETE_TEMP is referenced by following:
| Description: | Supply Chain Bill of Material Explosion Table |
|---|
CST_SC_BOM_EXPLOSION stores the parent-child assembly-organization combinations populated during the Supply Chain Rollup process.
ROLLUP_ID identifies all rows generated by an explosion. EXPLODED_FLAG and DELETED_FLAG
are used during explosion and low level code computation stages respectively.
Rows in the table are deleted for only those item-organization combinations which have been previously supply chain rolledup for the same cost type as the current rollup.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_SC_BOM_EXPLOSION_N1 | NONUNIQUE | APPS_TS_TX_IDX |
COMPONENT_ITEM_ID
COMPONENT_ORGANIZATION_ID ROLLUP_ID EXPLODED_FLAG |
| CST_SC_BOM_EXPLOSION_N2 | NONUNIQUE | APPS_TS_TX_IDX |
ROLLUP_ID
ASSEMBLY_ITEM_ID ASSEMBLY_ORGANIZATION_ID DELETED_FLAG |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROLLUP_ID | NUMBER | (15) | Y | Supply Chain Rollup identifier |
| ASSEMBLY_ITEM_ID | NUMBER | (15) | Y | Assembly item identifier |
| ASSEMBLY_ORGANIZATION_ID | NUMBER | (15) | Y | Assembly organization identifier |
| OPERATION_SEQ_NUM | NUMBER | (15) | Operation sequence number of this component in bill | |
| COMPONENT_SEQUENCE_ID | NUMBER | (15) | Bill identifier of this component | |
| COMPONENT_ITEM_ID | NUMBER | (15) | Y | Component item identifier |
| COMPONENT_ORGANIZATION_ID | NUMBER | (15) | Y | Component organization identifier |
| DELETED_FLAG | VARCHAR2 | (1) | Indicates if component has been assigned a low level code | |
| EXPLODED_FLAG | VARCHAR2 | (1) | Indicates if component has already been exploded | |
| PLAN_LEVEL | NUMBER | (15) | Y | Level in bill |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| REQUEST_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| COMPONENT_QUANTITY | NUMBER | Y | Component quantity per assembly |
BOM.CST_SC_BOM_EXPLOSION does not reference any database object
BOM.CST_SC_BOM_EXPLOSION is referenced by following:
| Description: | Supply Chain Bill of Material Structures |
|---|
CST_SC_BOM_STRUCTURES stores the Indented Supply Chain Bill of Material Structures for all item-organization combinations that have been computed during Supply Chain Rolled process.
ROLLUP_ID identifies all rows generated by a Supply Chain Rollup.
Rows in the table are deleted for only those item-organization combinations which have been previously supply chain rolledup for the same cost type as the current rollup.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_SC_BOM_STRUCTURES_U1 | UNIQUE | APPS_TS_TX_IDX |
ROLLUP_ID
TOP_INVENTORY_ITEM_ID TOP_ORGANIZATION_ID SORT_ORDER |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROLLUP_ID | NUMBER | (15) | Y | Supply Chain Rollup identifier |
| TOP_INVENTORY_ITEM_ID | NUMBER | (15) | Y | Item identifier of top level item |
| TOP_ORGANIZATION_ID | NUMBER | (15) | Y | Organization identifier of top level item |
| SORT_ORDER | NUMBER | (15) | Y | Sorting sequence for the report structure |
| BOM_LEVEL | NUMBER | (15) | Y | Level in bill |
| ASSEMBLY_ITEM_ID | NUMBER | (15) | Y | Assembly item identifier |
| ASSEMBLY_ORGANIZATION_ID | NUMBER | (15) | Y | Assembly organization identifier |
| COMPONENT_SEQUENCE_ID | NUMBER | (15) | Bill identifier of this component | |
| COMPONENT_ITEM_ID | NUMBER | (15) | Y | Component item identifier |
| COMPONENT_ORGANIZATION_ID | NUMBER | (15) | Y | Component organization identifier |
| COMPONENT_QUANTITY | NUMBER | Y | Component quantity per assembly | |
| EXTENDED_QUANTITY | NUMBER | Y | Extended quantity including quantity per, yield, shrinkage, and sourcing | |
| INCLUDE_IN_COST_ROLLUP | NUMBER | (15) | Flag indicating if component is to be used when rolling up costs | |
| EXTEND_COST_FLAG | NUMBER | (15) | Y | Flag indicating if component contributes costs to top level item |
| PHANTOM_FLAG | NUMBER | (15) | Y | Flag indicating if component has phantom routing or supply type |
| PHANTOM_SUB_ASSY_FLAG | NUMBER | (15) | Y | Flag indicating if component is part of a phantom subassembly |
| ERROR_CODE | NUMBER | (15) | Error code | |
| ERROR_MESG | VARCHAR2 | (100) | Error message | |
| COMPONENT_REVISION | VARCHAR2 | (3) | Component revision | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Standard Who column | |
| REQUEST_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_SC_BOM_STRUCTURES does not reference any database object
BOM.CST_SC_BOM_STRUCTURES is referenced by following:
| Description: | Supply Chain List for Assemblies to rollup |
|---|
CST_SC_LISTS stores the list of assembly-organization combinations that need to be Supply Chain Rolledup.
ROLLUP_ID identifies all rows required for Supply Chain Rollup.
Rows in the table are deleted for only those item-organization combinations which have been previously supply chain rolledup for the same cost type as the current rollup.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_SC_LISTS_U1 | UNIQUE | APPS_TS_TX_IDX |
ROLLUP_ID
INVENTORY_ITEM_ID ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROLLUP_ID | NUMBER | (15) | Y | Supply Chain Rollup identifier |
| INVENTORY_ITEM_ID | NUMBER | (15) | Y | Item identifier |
| ORGANIZATION_ID | NUMBER | (15) | Y | Organization identifier |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Standard Who column | |
| REQUEST_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_SC_LISTS does not reference any database object
BOM.CST_SC_LISTS is referenced by following:
| Description: | Supply Chain Low Level Codes |
|---|
CST_SC_LOW_LEVEL_CODES stores the low level codes for all the item-organization combinations that have been computed during Supply Chain Rolled process.
ROLLUP_ID identifies all rows generated by a Supply Chain Rollup. Low Level codes start at 0 and increase by 1 for every level up.
Rows in the table are deleted for only those item-organization combinations which have been previously supply chain rolledup for the same cost type as the current rollup.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_SC_LOW_LEVEL_CODES_U1 | UNIQUE | APPS_TS_TX_IDX |
INVENTORY_ITEM_ID
ORGANIZATION_ID ROLLUP_ID |
| CST_SC_LOW_LEVEL_CODES_N1 | NONUNIQUE | APPS_TS_TX_IDX |
ROLLUP_ID
LOW_LEVEL_CODE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROLLUP_ID | NUMBER | (15) | Y | Supply Chain Rollup identifier |
| INVENTORY_ITEM_ID | NUMBER | (15) | Y | Item identifier |
| ORGANIZATION_ID | NUMBER | (15) | Y | Organization identifier |
| LOW_LEVEL_CODE | NUMBER | (15) | Y | Low level code |
| ROUND_UNIT | NUMBER | Rounding unit for organization currency | ||
| PRECISION | NUMBER | Standard precision for organization currency | ||
| EXT_PRECISION | NUMBER | Extended precision for organization currency | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| REQUEST_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| LOT_SIZE | NUMBER | LOT SIZE FOR ITEM COST |
BOM.CST_SC_LOW_LEVEL_CODES does not reference any database object
BOM.CST_SC_LOW_LEVEL_CODES is referenced by following:
| Description: | Supply Chain Rollup History |
|---|
CST_SC_ROLLUP_HISTORY stores the complete set of parameters and timing statistics for every Supply Chain Rollup process.
ROLLUP_ID identifies all rows generated by a Supply Chain Rollup.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_SC_ROLLUP_HISTORY_U1 | UNIQUE | APPS_TS_TX_IDX | ROLLUP_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROLLUP_ID | NUMBER | (15) | Y | Supply Chain Rollup identifier |
| DESCRIPTION | VARCHAR2 | (240) | Supply Chain Rollup Description | |
| LIST_ID | NUMBER | (15) | Not currently used | |
| COST_TYPE_ID | NUMBER | (15) | Cost type identifier | |
| BUY_COST_TYPE_ID | NUMBER | (15) | Buy cost type identifier | |
| ORGANIZATION_ID | NUMBER | (15) | Organization identifier | |
| ASSIGNMENT_SET_ID | NUMBER | (15) | MRP assignment set identifier | |
| CONVERSION_TYPE | VARCHAR2 | (30) | GL daily conversion type identifier | |
| REPORT_LEVEL | NUMBER | (15) | Number of levels to report | |
| EXPLOSION_LEVEL | NUMBER | (15) | Number of levels to explode | |
| ROLLUP_OPTION_TYPE | NUMBER | (15) | Rollup option, full or single level rollup | |
| REPORT_OPTION_TYPE | NUMBER | (15) | Report option, with or without print report | |
| RANGE_TYPE | NUMBER | (15) | Range option | |
| REVISION_DATE | DATE | Item/bill revision date | ||
| INC_UNIMP_ECN_FLAG | NUMBER | (15) | Flag indicating whether to include unimplemented ECOs | |
| ENG_BILL_FLAG | NUMBER | (15) | Flag indicating whether to include engineering items | |
| QTY_PRECISION | NUMBER | (15) | Quantity precision | |
| ITEM_ID | NUMBER | (15) | Item identifier | |
| CATEGORY_SET_ID | NUMBER | (15) | Category set identifier | |
| CATEGORY_ID | NUMBER | (15) | Category identifier | |
| ALT_BOM_DESG | VARCHAR2 | (10) | Alternate designator | |
| ALT_RTG_DESG | VARCHAR2 | (10) | Alternate routing designator | |
| EXPLOSION_TIME | NUMBER | Time of explosion in seconds | ||
| LOW_LEVEL_CODE_TIME | NUMBER | Time of low level code computation in seconds | ||
| REMOVE_COSTS_TIME | NUMBER | Time of cost purge process in seconds | ||
| ROLLUP_TIME | NUMBER | Time of cost rollup in seconds | ||
| BOM_STRUCTURE_TIME | NUMBER | Time of BOM structure generation in seconds | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Standard Who column | |
| REQUEST_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_SC_ROLLUP_HISTORY does not reference any database object
BOM.CST_SC_ROLLUP_HISTORY is referenced by following:
| Description: | Supply Chain Sourcing Rule Snapshot |
|---|
CST_SC_SOURCING_RULES snapshots the MRP Sourcing Rules for the Assignment Set provided during the Supply Chain Rollup Process. It also snapshots the buy item costs, markup and ship charges used during the rollup.
ROLLUP_ID identifies all rows generated by a Supply Chain Rollup.
Rows in the table are not deleted for only those item, organization combinations which have been previously supply chain rolledup for the same cost type as the current rollup.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_SC_SOURCING_RULES_N1 | NONUNIQUE | APPS_TS_TX_IDX |
INVENTORY_ITEM_ID
ORGANIZATION_ID ROLLUP_ID ASSIGNMENT_SET_ID |
| CST_SC_SOURCING_RULES_N2 | NONUNIQUE | APPS_TS_TX_IDX |
ROLLUP_ID
ORGANIZATION_ID SOURCE_ORGANIZATION_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROLLUP_ID | NUMBER | (15) | Y | Supply Chain Rollup identifier |
| ASSIGNMENT_SET_ID | NUMBER | (15) | MRP assignment set identifier | |
| INVENTORY_ITEM_ID | NUMBER | (15) | Y | Item identifier |
| ORGANIZATION_ID | NUMBER | (15) | Y | Organization identifier |
| SOURCE_ORGANIZATION_ID | NUMBER | (15) | Source organization identifier | |
| VENDOR_ID | NUMBER | (15) | Vendor identifier | |
| SOURCE_TYPE | NUMBER | (15) | Y | Source type, make, buy, or transfer |
| SHIP_METHOD | VARCHAR2 | (30) | Shipping method | |
| ALLOCATION_PERCENT | NUMBER | Y | Allocation percentage | |
| MARKUP_CODE | NUMBER | Indicates whether markup is by amount or percentage | ||
| MARKUP | NUMBER | Markup amount or percentage | ||
| SHIP_CHARGE_CODE | NUMBER | Indicates whether shipping charge is by amount or percentage | ||
| SHIP_CHARGE | NUMBER | Shipping charge amount or percentage | ||
| ITEM_COST | NUMBER | Buy Item cost | ||
| BUY_COST_FLAG | VARCHAR2 | (1) | Flag indicating whether buy cost was used | |
| CONVERSION_TYPE | VARCHAR2 | (30) | GL daily conversion type identifier | |
| CONVERSION_RATE | NUMBER | GL daily conversion rate used | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| REQUEST_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| VENDOR_SITE_ID | NUMBER | (15) | Vendor site identifier | |
| SOURCING_RULE_NAME | VARCHAR2 | (50) | Sourcing Rule Name |
BOM.CST_SC_SOURCING_RULES does not reference any database object
BOM.CST_SC_SOURCING_RULES is referenced by following:
| Description: | Standard cost history |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_STANDARD_COSTS.COST_UPDATE_ID | CST_COST_UPDATES |
| CST_STANDARD_COSTS.LAST_COST_UPDATE_ID | CST_COST_UPDATES |
CST_STANDARD_COSTS stores item cost and standard cost adjustment
history for every item for every cost update. Records are inserted
during the final phase of the Standard Cost Update process for every
item being updated or when the item costs are initially defined. The
adjustment columns for WIP may not include adjustments for
resource or overhead rates. They include standard cost adjustments
for the items issued and completed from WIP.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_STANDARD_COSTS_U1 | UNIQUE | APPS_TS_TX_IDX |
COST_UPDATE_ID
INVENTORY_ITEM_ID ORGANIZATION_ID |
| CST_STANDARD_COSTS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
ORGANIZATION_ID
INVENTORY_ITEM_ID STANDARD_COST_REVISION_DATE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | Cost update session identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| STANDARD_COST_REVISION_DATE | DATE | Y | The date and time that cost update is run | |
| STANDARD_COST | NUMBER | Y | Standard cost for the item after cost update | |
| INVENTORY_ADJUSTMENT_QUANTITY | NUMBER | Total adjustment quantity for the item | ||
| INVENTORY_ADJUSTMENT_VALUE | NUMBER | Total adjustment value for the item | ||
| INTRANSIT_ADJUSTMENT_QUANTITY | NUMBER | Total intransit adjustment quantity for the item | ||
| INTRANSIT_ADJUSTMENT_VALUE | NUMBER | Total intransit adjustment value for the item | ||
| WIP_ADJUSTMENT_QUANTITY | NUMBER | Total adjustment quantity for the item in WIP | ||
| WIP_ADJUSTMENT_VALUE | NUMBER | Total adjustment value for the item in WIP | ||
| LAST_COST_UPDATE_ID | NUMBER | Not currently used | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_STANDARD_COSTS does not reference any database object
BOM.CST_STANDARD_COSTS is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_STANDARD_COSTS_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_STANDARD_COSTS prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item Identifier | |
| INVENTORY_ADJUSTMENT_VALUE | NUMBER | Inventory Adjustment Value | ||
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| STANDARD_COST | NUMBER | Y | Standard Cost | |
| WIP_ADJUSTMENT_VALUE | NUMBER | Work In Progress Adjustment Value | ||
| INTRANSIT_ADJUSTMENT_VALUE | NUMBER | Intransit Adjustment Value | ||
| COST_UPDATE_ID | NUMBER | Y | Cost Update Identifier | |
| SET_OF_BOOKS_ID | NUMBER | Set Of Books identifier |
BOM.CST_STANDARD_COSTS_EFC does not reference any database object
BOM.CST_STANDARD_COSTS_EFC is referenced by following:
| Description: | Table to store intermediate data when debugging standard cost update process |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_STD_COST_ADJ_DEBUG.COST_UPDATE_ID | CST_COST_UPDATES |
| CST_STD_COST_ADJ_DEBUG.WIP_ENTITY_ID | WIP_ENTITIES |
| CST_STD_COST_ADJ_DEBUG.DEPARTMENT_ID | BOM_DEPARTMENTS |
| CST_STD_COST_ADJ_DEBUG.RESOURCE_ID | BOM_RESOURCES |
CST_STD_COST_ADJ_DEBUG is a table which stores intermediate
calculations when debugging the standard cost update process.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_STD_COST_ADJ_DEBUG_N1 | NONUNIQUE | APPS_TS_INTERFACE |
COST_UPDATE_ID
TRANSACTION_TYPE INVENTORY_ITEM_ID |
| CST_STD_COST_ADJ_DEBUG_N2 | NONUNIQUE | APPS_TS_INTERFACE |
ORGANIZATION_ID
COST_UPDATE_ID TRANSACTION_TYPE WIP_ENTITY_ID OPERATION_SEQ_NUM INVENTORY_ITEM_ID |
| CST_STD_COST_ADJ_DEBUG_N3 | NONUNIQUE | APPS_TS_INTERFACE | WIP_ENTITY_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | Cost update session identifier | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| TRANSACTION_TYPE | NUMBER | Y | Type of transaction | |
| ADJUSTMENT_QUANTITY | NUMBER | Y | Adjustment quantity | |
| SOURCE_TYPE | NUMBER | Y | Flag indicating whether data comes from perpetual stack or transaction rollback | |
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier | ||
| SUBINVENTORY | VARCHAR2 | (10) | Subinventory name | |
| WIP_ENTITY_ID | NUMBER | WIP job or repetitive assembly identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number in a routing | ||
| DEPARTMENT_ID | NUMBER | Department identifier | ||
| RESOURCE_SEQ_ID | NUMBER | Resource sequence identifier | ||
| RESOURCE_SEQ_NUM | NUMBER | Resource sequence number | ||
| RESOURCE_ID | NUMBER | Resource identifier (sub-element) | ||
| TRANSACTION_ID | NUMBER | Transaction identifier | ||
| BASIS_TYPE | NUMBER | Basis | ||
| APPLIED_RESOURCE_VALUE | NUMBER | Resource value applied to job | ||
| STANDARD_CHARGE_FLAG | NUMBER | Not currently used | ||
| STANDARD_RATE_FLAG | NUMBER | Flag indicating resource rate is standard rate or actual rate | ||
| FROM_ORGANIZATION_ID | NUMBER | Intransit source organization | ||
| TO_ORGANIZATION_ID | NUMBER | Intransit target organization | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| COST_GROUP_ID | NUMBER | Cost Group identifier | ||
| INTRANSIT_INV_ACCOUNT | NUMBER | Intransit Inventory Account |
BOM.CST_STD_COST_ADJ_DEBUG does not reference any database object
BOM.CST_STD_COST_ADJ_DEBUG is referenced by following:
| Description: | Temporary table for standard cost adjustment |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_STD_COST_ADJ_TEMP.COST_UPDATE_ID | CST_COST_UPDATES |
| CST_STD_COST_ADJ_TEMP.WIP_ENTITY_ID | WIP_ENTITIES |
| CST_STD_COST_ADJ_TEMP.DEPARTMENT_ID | BOM_DEPARTMENTS |
| CST_STD_COST_ADJ_TEMP.RESOURCE_ID | BOM_RESOURCES |
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_STD_COST_ADJ_TEMP_N1 | NONUNIQUE |
TRANSACTION_TYPE
INVENTORY_ITEM_ID | |
| CST_STD_COST_ADJ_TEMP_N2 | NONUNIQUE |
ORGANIZATION_ID
TRANSACTION_TYPE WIP_ENTITY_ID OPERATION_SEQ_NUM INVENTORY_ITEM_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | ||
| TRANSACTION_TYPE | NUMBER | Y | ||
| ADJUSTMENT_QUANTITY | NUMBER | Y | ||
| SOURCE_TYPE | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | |||
| SUBINVENTORY | VARCHAR2 | (10) | ||
| WIP_ENTITY_ID | NUMBER | |||
| OPERATION_SEQ_NUM | NUMBER | |||
| DEPARTMENT_ID | NUMBER | |||
| RESOURCE_SEQ_ID | NUMBER | |||
| RESOURCE_SEQ_NUM | NUMBER | |||
| RESOURCE_ID | NUMBER | |||
| TRANSACTION_ID | NUMBER | |||
| BASIS_TYPE | NUMBER | |||
| APPLIED_RESOURCE_VALUE | NUMBER | |||
| STANDARD_CHARGE_FLAG | NUMBER | |||
| STANDARD_RATE_FLAG | NUMBER | |||
| FROM_ORGANIZATION_ID | NUMBER | |||
| TO_ORGANIZATION_ID | NUMBER | |||
| COST_GROUP_ID | NUMBER | |||
| INTRANSIT_INV_ACCOUNT | NUMBER |
BOM.CST_STD_COST_ADJ_TEMP does not reference any database object
BOM.CST_STD_COST_ADJ_TEMP is referenced by following:
| Description: | Standard cost adjustment value computed by standard cost update |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_STD_COST_ADJ_VALUES.COST_UPDATE_ID | CST_COST_UPDATES |
| CST_STD_COST_ADJ_VALUES.COST_ELEMENT_ID | CST_COST_ELEMENTS |
| CST_STD_COST_ADJ_VALUES.RESOURCE_ID | BOM_RESOURCES |
| CST_STD_COST_ADJ_VALUES.DEPARTMENT_ID | BOM_DEPARTMENTS |
| CST_STD_COST_ADJ_VALUES.WIP_ENTITY_ID | WIP_ENTITIES |
CST_STD_COST_ADJ_VALUES stores adjustment details during the
standard cost update process and is used for reporting purposes.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_STD_COST_ADJ_VALUES_N1 | NONUNIQUE | APPS_TS_INTERFACE |
COST_UPDATE_ID
TRANSACTION_TYPE ORGANIZATION_ID INVENTORY_ITEM_ID TRANSACTION_ID |
| CST_STD_COST_ADJ_VALUES_N2 | NONUNIQUE | APPS_TS_INTERFACE |
WIP_ENTITY_ID
COST_UPDATE_ID OPERATION_SEQ_NUM RESOURCE_ID NEW_UNIT_COST |
| CST_STD_COST_ADJ_VALUES_N3 | NONUNIQUE | APPS_TS_INTERFACE |
INVENTORY_ITEM_ID
ORGANIZATION_ID COST_UPDATE_ID SUBINVENTORY |
| CST_STD_COST_ADJ_VALUES_N4 | NONUNIQUE | APPS_TS_INTERFACE |
TRANSACTION_ID
TRANSACTION_TYPE COST_UPDATE_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | Cost update session identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| TRANSACTION_TYPE | NUMBER | Y | Type of transaction | |
| ADJUSTMENT_QUANTITY | NUMBER | Y | Adjustment quantity | |
| OLD_UNIT_COST | NUMBER | Y | Current unit cost for the entity | |
| NEW_UNIT_COST | NUMBER | Y | New unit cost for the entity | |
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| LEVEL_TYPE | NUMBER | Level at which cost is incurred | ||
| IN_OUT_FLAG | NUMBER | Direction at which the cost is incurred for WIP | ||
| RESOURCE_ID | NUMBER | Resource identifier (subelement) | ||
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier | ||
| SUBINVENTORY | VARCHAR2 | (10) | Subinventory name | |
| WIP_ENTITY_ID | NUMBER | WIP job or repetitive assembly identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number in a routing | ||
| DEPARTMENT_ID | NUMBER | Department identifier | ||
| RESOURCE_SEQ_ID | NUMBER | Resource sequence identifier | ||
| RESOURCE_SEQ_NUM | NUMBER | Resource sequence number | ||
| STANDARD_RATE_FLAG | NUMBER | Flag indicating resource rate is standard rate or actual rate | ||
| TRANSACTION_ID | NUMBER | Transaction identifier | ||
| BASIS_TYPE | NUMBER | Basis | ||
| FROM_ORGANIZATION_ID | NUMBER | Intransit source organization | ||
| TO_ORGANIZATION_ID | NUMBER | Intransit target organization | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| COST_GROUP_ID | NUMBER | Cost Group identifier | ||
| INTRANSIT_INV_ACCOUNT | NUMBER | Intransit Inventory Account |
BOM.CST_STD_COST_ADJ_VALUES does not reference any database object
BOM.CST_STD_COST_ADJ_VALUES is referenced by following:
| Description: | Euro as a Functional Currency Archive |
|---|
CST_STD_COST_ADJ_VALUES_EFC is used exclusively as an archive table
for the "Euro as a functional currency" project. It mirrors the table
CST_STD_COST_ADJ_VALUES prior to conversion to the euro currency.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| NEW_UNIT_COST | NUMBER | Y | New Unit Cost | |
| TO_ORGANIZATION_ID | NUMBER | To Organization Identifier | ||
| FROM_ORGANIZATION_ID | NUMBER | From Organization Identifier | ||
| OLD_UNIT_COST | NUMBER | Y | Old Unit Cost | |
| COST_UPDATE_ID | NUMBER | Y | Cost Update Identifier | |
| INVENTORY_ITEM_ID | NUMBER | Inventory Item Identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation Sequence Number | ||
| COST_ELEMENT_ID | NUMBER | Y | Cost Element Identifier | |
| SET_OF_BOOKS_ID | NUMBER | Set Of Books Identifier |
BOM.CST_STD_COST_ADJ_VALUES_EFC does not reference any database object
BOM.CST_STD_COST_ADJ_VALUES_EFC is referenced by following:
| Description: | Temporary list of subinventories for use in cost reporting |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SUBINVENTORY_CODE | VARCHAR2 | (10) | Subinventory code from mtl_secondary_inventories |
BOM.CST_SUB_LIST_TEMP does not reference any database object
BOM.CST_SUB_LIST_TEMP is referenced by following:
| Description: | Temporary table used by inventory value report |
|---|
CST_VALUE_REPORT_TEMP is a temporary table used by the Inventory Value
Report to generate a report summarized by valuation account. It is
populated by the report itself and stores the total amount for a
particular account.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_VALUE_REPORT_TEMP_N1 | NONUNIQUE | APPS_TS_NOLOGGING | SESSIONID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSIONID | NUMBER | Y | ORACLE session identifier | |
| ACCOUNT_SEGMENT | VARCHAR2 | (240) | Y | Concatenated code combination segments |
| AMOUNT | NUMBER | Account balance |
BOM.CST_VALUE_REPORT_TEMP does not reference any database object
BOM.CST_VALUE_REPORT_TEMP is referenced by following:
| Description: | CST_WIP_LAYERS stores information about each inventory layer in WIP |
|---|
CST_WIP_LAYERS stores information about each inventory layer
within WIP for each WIP job or schedule for a FIFO/LIFO
organization, by operation sequence number and inventory
item. This is a supporting table for WIP_REQUIREMENT_OPERATIONS,
and together with WIP_LAYER_COST_DETAILS, is a supporting
table for WIP_REQ_OPERATION_COST_DETAILS.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_WIP_LAYERS_U1 | UNIQUE | APPS_TS_TX_IDX |
WIP_LAYER_ID
INV_LAYER_ID |
| CST_WIP_LAYERS_U2 | UNIQUE | APPS_TS_TX_IDX |
WIP_ENTITY_ID
OPERATION_SEQ_NUM INVENTORY_ITEM_ID INV_LAYER_DATE INV_LAYER_ID WIP_LAYER_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| WIP_LAYER_ID | NUMBER | (15) | Y | WIP layer identifier |
| WIP_ENTITY_ID | NUMBER | (15) | Y | WIP job or schedule identifier |
| RELIEVED_MATL_FINAL_COMP_QTY | NUMBER | Y | Material quantity relieved due to WIP final completion | |
| TEMP_RELIEVED_QTY | NUMBER | Y | Temporary column used in completion cost implementation | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Standard Who column | |
| REQUEST_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| OPERATION_SEQ_NUM | NUMBER | (15) | Y | Operation sequence number within a routing |
| INVENTORY_ITEM_ID | NUMBER | (15) | Y | Item identifier |
| REPETITIVE_SCHEDULE_ID | NUMBER | (15) | WIP repetitive schedule identifier | |
| INV_LAYER_ID | NUMBER | (15) | Y | Inventory layer identifier |
| INV_LAYER_DATE | DATE | Y | Inventory layer creation date | |
| CREATE_TXN_ID | NUMBER | (15) | Transaction identifier that created this WIP layer | |
| APPLIED_MATL_QTY | NUMBER | Y | Part quantity issued | |
| RELIEVED_MATL_COMP_QTY | NUMBER | Y | Material quantity relieved due to WIP completion | |
| RELIEVED_MATL_SCRAP_QTY | NUMBER | Y | Material quantity relieved due to WIP scrap |
BOM.CST_WIP_LAYERS does not reference any database object
BOM.CST_WIP_LAYERS is referenced by following:
| Description: | CST_WIP_LAYER_COST_DETAILS stores the elemental cost, by level, of inventory layers in WIP |
|---|
CST_WIP_LAYER_COST_DETAILS stores the elemental cost, by level, of
each inventory layer within WIP. This is a child table of
CST_WIP_LAYERS.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_WIP_LAYER_COST_DETAILS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
WIP_LAYER_ID
INV_LAYER_ID COST_ELEMENT_ID |
| CST_WIP_LAYER_COST_DETAILS_U1 | NONUNIQUE | APPS_TS_TX_IDX |
LEVEL_TYPE
COST_ELEMENT_ID INV_LAYER_ID WIP_LAYER_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| WIP_LAYER_ID | NUMBER | (15) | Y | Material quantity relieved due to WIP scrap |
| INV_LAYER_ID | NUMBER | (15) | Y | Inventory layer identifier |
| COST_ELEMENT_ID | NUMBER | (15) | Y | Cost element identifier |
| LEVEL_TYPE | NUMBER | (15) | Y | Level type |
| LAYER_COST | NUMBER | Y | Elemental layer cost | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard Who column |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | (15) | Y | Standard Who column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Standard Who column | |
| REQUEST_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_APPLICATION_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_ID | NUMBER | (15) | Concurrent Who column | |
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_WIP_LAYER_COST_DETAILS does not reference any database object
BOM.CST_WIP_LAYER_COST_DETAILS is referenced by following:
| Description: | CST_WIP_OPERATION_TXN_COSTS stores snapshots of WIP operations tables |
|---|
CST_WIP_OPERATION_TXN_COSTS stores snapshots of WIP_REQUIREMENT_OPERATIONS,
WIP_REQ_OPERATION_COST_DETAILS, WIP_OPERAION_OVERHEADS, and
WIP_OPERATION_RESOURCES. This information can be used to track the value
changes for a WIP job or schedule.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_WIP_OPERATION_TXN_COSTS_U1 | UNIQUE | APPS_TS_TX_IDX | TXN_COST_ID |
| CST_WIP_OPERATION_TXN_COSTS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
TRANSACTION_ID
TRANSACTION_SOURCE_CODE |
| CST_WIP_OPERATION_TXN_COSTS_N2 | NONUNIQUE | APPS_TS_TX_IDX |
WIP_ENTITY_ID
REPETITIVE_SCHEDULE_ID TRANSACTION_DATE TRANSACTION_ID TRANSACTION_SOURCE_CODE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TXN_COST_ID | NUMBER | Y | Primary key sequence identifier | |
| TRANSACTION_ID | NUMBER | Y | Transaction identifier | |
| TRANSACTION_SOURCE_CODE | NUMBER | Y | Transaction source code | |
| WIP_ENTITY_ID | NUMBER | Y | WIP job or schedule identifier | |
| REPETITIVE_SCHEDULE_ID | NUMBER | WIP repetitive schedule identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Y | Operation sequence number in a routing | |
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| LEVEL_TYPE | NUMBER | Y | Level type | |
| TRANSACTION_DATE | DATE | Transaction date | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Bill identifier of this component | ||
| RESOURCE_ID | NUMBER | Resource identifier | ||
| RESOURCE_SEQ_NUM | NUMBER | Resource sequence number | ||
| BASIS_TYPE | NUMBER | Basis type | ||
| PRIOR_APPLIED_UNITS | NUMBER | Prior quantity applied | ||
| NEW_APPLIED_UNITS | NUMBER | New quantity applied | ||
| PRIOR_APPLIED_VALUE | NUMBER | Prior value applied | ||
| NEW_APPLIED_VALUE | NUMBER | New value applied | ||
| PRIOR_RELIEVED_SCRAP_UNITS | NUMBER | Prior quantity relieved due to WIP scrap | ||
| NEW_RELIEVED_SCRAP_UNITS | NUMBER | New quantity relieved due to WIP scrap | ||
| PRIOR_RELIEVED_SCRAP_VALUE | NUMBER | Prior value relieved due to WIP scrap | ||
| NEW_RELIEVED_SCRAP_VALUE | NUMBER | New value relieved due to WIP scrap | ||
| PRIOR_RELIEVED_VAR_VALUE | NUMBER | Prior value relieved to WIP variance | ||
| NEW_RELIEVED_VAR_VALUE | NUMBER | New value relieved to WIP variance | ||
| PRIOR_RELIEVED_FINAL_UNITS | NUMBER | Prior quantity relieved due to WIP final completion | ||
| NEW_RELIEVED_FINAL_UNITS | NUMBER | New quantity relieved due to WIP final completion | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ORGANIZATION_ID | NUMBER | (15) | Y | Organization identifier |
| PRIOR_RELIEVED_COMP_UNITS | NUMBER | Prior quantity relieved due to WIP completion | ||
| NEW_RELIEVED_COMP_UNITS | NUMBER | New quantity relieved due to WIP completion | ||
| PRIOR_RELIEVED_COMP_VALUE | NUMBER | Prior value relieved due to WIP completion | ||
| NEW_RELIEVED_COMP_VALUE | NUMBER | New value relieved due to WIP completion |
BOM.CST_WIP_OPERATION_TXN_COSTS does not reference any database object
BOM.CST_WIP_OPERATION_TXN_COSTS is referenced by following:
| Description: | PAC specific temporary table for WIP Value Report |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | PAC Cost Type ID | ||
| COST_GROUP_ID | NUMBER | PAC Cost Group ID | ||
| PAC_PERIOD_ID | NUMBER | PAC Period ID | ||
| WIP_ENTITY_ID | NUMBER | WIP entity ID | ||
| LINE_ID | NUMBER | Repetitive Line ID | ||
| ORGANIZATION_ID | NUMBER | Organization ID | ||
| COST_ELEMENT_ID | NUMBER | Cost Element ID | ||
| BEGINING_BALANCE | NUMBER | Begining Balance | ||
| COSTS_INCURRED | NUMBER | Incurred Cost | ||
| COSTS_RELIEVED | NUMBER | Relieved Cost | ||
| ENDING_BALANCE | NUMBER | Ending Balance | ||
| VARIANCE_AMOUNT | NUMBER | Variance Amount |
BOM.CST_WIP_PAC_PERIOD_BAL_TMP does not reference any database object
BOM.CST_WIP_PAC_PERIOD_BAL_TMP is referenced by following:
| Description: | CST_WIP_VALUE_HISTORY stores snapshots of WIP_PERIOD_BALANCES |
|---|
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_WIP_VALUE_HISTORY_U1 | UNIQUE | APPS_TS_TX_IDX |
TRANSACTION_ID
TRANSACTION_SOURCE_CODE |
| CST_WIP_VALUE_HISTORY_U2 | UNIQUE | APPS_TS_TX_IDX |
WIP_ENTITY_ID
REPETITIVE_SCHEDULE_ID TRANSACTION_DATE TRANSACTION_ID TRANSACTION_SOURCE_CODE |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | Y | Transaction identifier | |
| TRANSACTION_SOURCE_CODE | NUMBER | Y | Transaction source code | |
| TRANSACTION_DATE | DATE | Transaction date | ||
| WIP_ENTITY_ID | NUMBER | Y | WIP job or schedule identifier | |
| REPETITIVE_SCHEDULE_ID | NUMBER | WIP repetitive schedule identifier | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| CLASS_TYPE | NUMBER | Y | Accounting class type | |
| PRIOR_TL_RESOURCE_IN | NUMBER | Prior this level resource value put into the job or schedule | ||
| PRIOR_TL_OVERHEAD_IN | NUMBER | Prior this level overhead value put into the job or schedule | ||
| PRIOR_TL_OSP_IN | NUMBER | Prior this level outside processing value put into the job or schedule | ||
| PRIOR_PL_MATERIAL_IN | NUMBER | Prior previous level material value put into the job or schedule | ||
| PRIOR_PL_MATERIAL_OVERHEAD_IN | NUMBER | Prior previous level material overhead value put into the job or schedule | ||
| PRIOR_PL_RESOURCE_IN | NUMBER | Prior previous level resource value put into the job or schedule | ||
| PRIOR_PL_OVERHEAD_IN | NUMBER | Prior previous level overhead value put into the job or schedule | ||
| PRIOR_PL_OSP_IN | NUMBER | Prior previous level outside processing value put into the job or schedule | ||
| PRIOR_TL_MATERIAL_OUT | NUMBER | Prior this level material value taken out of the job or schedule | ||
| PRIOR_TL_MATERIAL_OVERHEAD_OUT | NUMBER | Prior this level material overhead value taken out of the job or schedule | ||
| PRIOR_TL_RESOURCE_OUT | NUMBER | Prior this level resource value taken out of the job or schedule | ||
| PRIOR_TL_OVERHEAD_OUT | NUMBER | Prior this level overhead value taken out of the job or schedule | ||
| PRIOR_TL_OSP_OUT | NUMBER | Prior this level outside processing value taken out of the job or schedule | ||
| PRIOR_PL_MATERIAL_OUT | NUMBER | Prior previous level material value taken out of the job or schedule | ||
| PRIOR_PL_MATERIAL_OVERHEAD_OUT | NUMBER | Prior previous level material overhead value taken out of the job or schedule | ||
| PRIOR_PL_RESOURCE_OUT | NUMBER | Prior previous level resource value taken out of the job or schedule | ||
| PRIOR_PL_OVERHEAD_OUT | NUMBER | Prior previous level overhead value taken out of the job or schedule | ||
| PRIOR_PL_OSP_OUT | NUMBER | Prior previous level outside processing value taken out of the job or schedule | ||
| PRIOR_TL_MATERIAL_VAR | NUMBER | Prior this level material variance | ||
| PRIOR_TL_MATERIAL_OVERHEAD_VAR | NUMBER | Prior this level material overhead variance | ||
| PRIOR_TL_RESOURCE_VAR | NUMBER | Prior this level resource variance | ||
| PRIOR_TL_OSP_VAR | NUMBER | Prior this level outside processing variance | ||
| PRIOR_TL_OVERHEAD_VAR | NUMBER | Prior this level overhead variance | ||
| PRIOR_PL_MATERIAL_VAR | NUMBER | Prior this level material variance | ||
| PRIOR_PL_MATERIAL_OVERHEAD_VAR | NUMBER | Prior this level material overhead variance | ||
| PRIOR_PL_RESOURCE_VAR | NUMBER | Prior this level resource variance | ||
| PRIOR_PL_OVERHEAD_VAR | NUMBER | Prior this level outside processing variance | ||
| PRIOR_PL_OSP_VAR | NUMBER | Prior this level overhead variance | ||
| PRIOR_TL_SCRAP_IN | NUMBER | Prior this level scrap value put into the job or schedule | ||
| PRIOR_TL_SCRAP_OUT | NUMBER | Prior this level scrap value taken out of the job or schedule | ||
| PRIOR_TL_SCRAP_VAR | NUMBER | Prior this level scrap variance | ||
| NEW_TL_RESOURCE_IN | NUMBER | New this level resource value put into the job or schedule | ||
| NEW_TL_OVERHEAD_IN | NUMBER | New this level overhead value put into the job or schedule | ||
| NEW_TL_OSP_IN | NUMBER | New this level outside processing value put into the job or schedule | ||
| NEW_PL_MATERIAL_IN | NUMBER | New previous level material value put into the job or schedule | ||
| NEW_PL_MATERIAL_OVERHEAD_IN | NUMBER | New previous level material overhead value put into the job or schedule | ||
| NEW_PL_RESOURCE_IN | NUMBER | New previous level resource value put into the job or schedule | ||
| NEW_PL_OVERHEAD_IN | NUMBER | New previous level overhead value put into the job or schedule | ||
| NEW_PL_OSP_IN | NUMBER | New previous level outside processing value put into the job or schedule | ||
| NEW_TL_MATERIAL_OUT | NUMBER | New this level material value taken out of the job or schedule | ||
| NEW_TL_MATERIAL_OVERHEAD_OUT | NUMBER | New this level material overhead value taken out of the job or schedule | ||
| NEW_TL_RESOURCE_OUT | NUMBER | New this level resource value taken out of the job or schedule | ||
| NEW_TL_OVERHEAD_OUT | NUMBER | New this level overhead value taken out of the job or schedule | ||
| NEW_TL_OSP_OUT | NUMBER | New this level outside processing value taken out of the job or schedule | ||
| NEW_PL_MATERIAL_OUT | NUMBER | New previous level material value taken out of the job or schedule | ||
| NEW_PL_MATERIAL_OVERHEAD_OUT | NUMBER | New previous level material overhead value taken out of the job or schedule | ||
| NEW_PL_RESOURCE_OUT | NUMBER | New previous level resource value taken out of the job or schedule | ||
| NEW_PL_OVERHEAD_OUT | NUMBER | New previous level overhead value taken out of the job or schedule | ||
| NEW_PL_OSP_OUT | NUMBER | New previous level outside processing value taken out of the job or schedule | ||
| NEW_TL_MATERIAL_VAR | NUMBER | New this level material variance | ||
| NEW_TL_MATERIAL_OVERHEAD_VAR | NUMBER | New this level material overhead variance | ||
| NEW_TL_RESOURCE_VAR | NUMBER | New this level resource variance | ||
| NEW_TL_OSP_VAR | NUMBER | New this level outside processing variance | ||
| NEW_TL_OVERHEAD_VAR | NUMBER | New this level overhead variance | ||
| NEW_PL_MATERIAL_VAR | NUMBER | New previous level material variance | ||
| NEW_PL_MATERIAL_OVERHEAD_VAR | NUMBER | New previous level material overhead variance | ||
| NEW_PL_RESOURCE_VAR | NUMBER | New previous level resource variance | ||
| NEW_PL_OVERHEAD_VAR | NUMBER | New previous level overhead variance | ||
| NEW_PL_OSP_VAR | NUMBER | New previous level outside processing variance | ||
| NEW_TL_SCRAP_IN | NUMBER | New this level scrap value put into the job or schedule | ||
| NEW_TL_SCRAP_OUT | NUMBER | New this level scrap value taken out of the job or schedule | ||
| NEW_TL_SCRAP_VAR | NUMBER | New this level scrap variance | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
BOM.CST_WIP_VALUE_HISTORY does not reference any database object
BOM.CST_WIP_VALUE_HISTORY is referenced by following:
| Description: | Table Holds Write-Off Header Information |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_WRITE_OFFS.ACCRUAL_ACCOUNT_ID | GL_CODE_COMBINATIONS |
| CST_WRITE_OFFS.OPERATING_UNIT_ID | HR_ALL_ORGANIZATION_UNITS |
| CST_WRITE_OFFS.OFFSET_ACCOUNT_ID | GL_CODE_COMBINATIONS |
| CST_WRITE_OFFS.ERV_ACCOUNT_ID | GL_CODE_COMBINATIONS |
| CST_WRITE_OFFS.PO_DISTRIBUTION_ID | PO_DISTRIBUTIONS_ALL |
| CST_WRITE_OFFS.INVENTORY_TRANSACTION_ID | MTL_MATERIAL_TRANSACTIONS |
| CST_WRITE_OFFS.REASON_ID | MTL_TRANSACTION_REASONS |
|
CST_WRITE_OFFS.INVENTORY_ITEM_ID
CST_WRITE_OFFS.OPERATING_UNIT_ID |
MTL_SYSTEM_ITEMS_B |
| CST_WRITE_OFFS.VENDOR_ID | PO_VENDORS |
Table will be used to Hold the Header Information for the Write-Offs and Reversals performed as part of the Accrual Reconciliation Process
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_WRITE_OFFS_U1 | UNIQUE | APPS_TS_TX_IDX | WRITE_OFF_ID |
| CST_WRITE_OFFS_N1 | NONUNIQUE | APPS_TS_TX_IDX |
WRITE_OFF_SELECT_FLAG
OPERATING_UNIT_ID |
| CST_WRITE_OFFS_N2 | NONUNIQUE | APPS_TS_TX_IDX |
OPERATING_UNIT_ID
TRANSACTION_DATE |
| CST_WRITE_OFFS_N3 | NONUNIQUE | APPS_TS_TX_IDX |
INVENTORY_TRANSACTION_ID
ACCRUAL_ACCOUNT_ID |
| CST_WRITE_OFFS_N4 | NONUNIQUE | APPS_TS_TX_IDX |
INVOICE_DISTRIBUTION_ID
ACCRUAL_ACCOUNT_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| WRITE_OFF_ID | NUMBER | Y | Write-Off Identifier | |
| TRANSACTION_DATE | DATE | Y | Write-Off Date | |
| ACCRUAL_ACCOUNT_ID | NUMBER | Y | Accrual Account Identifier | |
| OFFSET_ACCOUNT_ID | NUMBER | Offset Account Identifier | ||
| ERV_ACCOUNT_ID | NUMBER | ERV Account Identifier | ||
| WRITE_OFF_AMOUNT | NUMBER | Y | Total Amount of the Write-Off | |
| ENTERED_AMOUNT | NUMBER | Write-Off Amount in Entered Currency | ||
| CURRENCY_CODE | VARCHAR2 | (15) | Currency Code | |
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | Currency Conversion Type | |
| CURRENCY_CONVERSION_RATE | NUMBER | Currency Conversion Rate | ||
| CURRENCY_CONVERSION_DATE | DATE | Currency Conversion Date | ||
| TRANSACTION_TYPE_CODE | VARCHAR2 | (25) | Y | Transaction Type Identifier |
| PO_DISTRIBUTION_ID | NUMBER | PO Distribution Identifier | ||
| INVOICE_DISTRIBUTION_ID | NUMBER | Invoice Distribution Identifier | ||
| INVENTORY_TRANSACTION_ID | NUMBER | Inventory Transaction Identifier | ||
| REVERSAL_ID | NUMBER | Write-Off Identifier of the Transaction the Current Write-Off is Reversing | ||
| REASON_ID | NUMBER | Write-Off Reason Identifier | ||
| COMMENTS | VARCHAR2 | (240) | Commenty on why Write-Off Occurred | |
| INVENTORY_ITEM_ID | NUMBER | Item Identifier | ||
| VENDOR_ID | NUMBER | Vendor Identifier | ||
| DESTINATION_TYPE_CODE | VARCHAR2 | (25) | Destination Type Identifier | |
| WRITE_OFF_SELECT_FLAG | VARCHAR2 | (1) | Internal Record Selection | |
| LEGAL_ENTITY_ID | NUMBER | Legal Entity Identifier | ||
| OPERATING_UNIT_ID | NUMBER | Y | Operating Unit Identifier | |
| LAST_UPDATE_DATE | DATE | Standard Who Column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Standard Who Column | ||
| CREATED_BY | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who Column |
BOM.CST_WRITE_OFFS does not reference any database object
BOM.CST_WRITE_OFFS is referenced by following:
| Description: | Table Holds Details of Write-Off Transactions |
|---|
| Foreign Key Column | Foreign Table |
|---|---|
| CST_WRITE_OFF_DETAILS.RCV_TRANSACTION_ID | RCV_TRANSACTIONS |
| CST_WRITE_OFF_DETAILS.INVENTORY_TRANSACTION_ID | MTL_MATERIAL_TRANSACTIONS |
| CST_WRITE_OFF_DETAILS.OPERATING_UNIT_ID | HR_ALL_ORGANIZATION_UNITS |
Table will be used to Hold the Write-Off and Reversal Details that are part of the Accrual Reconciliation Process
| Index | Type | Tablespace | Column |
|---|---|---|---|
| CST_WRITE_OFF_DETAILS_N1 | NONUNIQUE | APPS_TS_TX_IDX | WRITE_OFF_ID |
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| WRITE_OFF_ID | NUMBER | Y | Write-Off Identifier | |
| RCV_TRANSACTION_ID | NUMBER | Receiving Transaction Identifier | ||
| INVOICE_DISTRIBUTION_ID | NUMBER | Invoice Distribution Identifier | ||
| INVENTORY_TRANSACTION_ID | NUMBER | Inventory Transaction Identifier | ||
| WRITE_OFF_TRANSACTION_ID | NUMBER | Write-Off Transaction Identifier | ||
| TRANSACTION_TYPE_CODE | VARCHAR2 | (25) | Y | Transaction Type Identifier |
| TRANSACTION_DATE | DATE | Y | Transaction Date | |
| AMOUNT | NUMBER | Y | Transaction Amount | |
| ENTERED_AMOUNT | NUMBER | Entered Transaction Amount | ||
| QUANTITY | NUMBER | Transaction Quantity | ||
| CURRENCY_CODE | VARCHAR2 | (15) | Currency Code | |
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | Currency Conversion Type | |
| CURRENCY_CONVERSION_RATE | NUMBER | Currency Conversion Rate | ||
| CURRENCY_CONVERSION_DATE | DATE | Currency Conversion Date | ||
| INVENTORY_ORGANIZATION_ID | NUMBER | Organization Identifier | ||
| OPERATING_UNIT_ID | NUMBER | Y | Operating Unit Identifier | |
| AE_HEADER_ID | NUMBER | Accounting Header Identifier | ||
| LAST_UPDATE_DATE | DATE | Standard Who Column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Standard Who Column | ||
| CREATED_BY | NUMBER | Standard Who Column | ||
| REQUEST_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_ID | NUMBER | Concurrent Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who Column | ||
| AE_LINE_NUM | NUMBER | Accounting Line Number |
BOM.CST_WRITE_OFF_DETAILS does not reference any database object
BOM.CST_WRITE_OFF_DETAILS is referenced by following:
| Description: | Table to map material transactions to their corresponding event types. |
|---|
This table is used in SLA during processing of material transactions. It serves as a lookup to find which event type and event class should be used based on the transaction action, transaction source type, fob point, organization, transfer pricing flag, and transfer type.
An additional attribute column is used to distinguish between certain event types, such as the implicit cost group transfer in a common issue to wip (CITW attribute) and a regular issue from inventory.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ACTION_ID | NUMBER | TRANSACTION_ACTION_ID from MTL_MATERIAL_TRANSACTIONS | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | TRANSACTION_SOURCE_TYPE_ID from MTL_TRANSACTION_ACCOUNTS | ||
| EVENT_CLASS_CODE | VARCHAR2 | (30) | SLA Event Class | |
| EVENT_TYPE_CODE | VARCHAR2 | (30) | SLA Event Type | |
| ATTRIBUTE | VARCHAR2 | (20) | Used to identify special situations like common issue to WIP, variance transfer etc. | |
| FOB_POINT | NUMBER | FOB_POINT from MTL_MATERIAL_TRANSACTIONS | ||
| ORGANIZATION | VARCHAR2 | (20) | Tells whether to use the organization or the transfer organization for the corresponding MMT transaction. | |
| TRANSFER_TYPE | VARCHAR2 | (20) | SHIP or RCPT | |
| TP | VARCHAR2 | (1) | Y or N based on value of CST: Transfer Price Option |
BOM.CST_XLA_INV_EVENT_MAP does not reference any database object
BOM.CST_XLA_INV_EVENT_MAP is referenced by following:
| Description: | Table to map receiving transactions to their corresponding event types. |
|---|
This table is used in SLA during processing of receiving transactions. It serves as a lookup to find which event type and event class should be used based on the receiving transaction type. Also, an attribute column exists to distinguish event types that cannot be uniquely determined from transaction type.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_TYPE_ID | NUMBER | EVENT_TYPE_ID from RCV_ACCOUNTING_EVENTS | ||
| ATTRIBUTE | VARCHAR2 | (25) | Used in addition to the transaction type id to identify specific transaction type | |
| EVENT_CLASS_CODE | VARCHAR2 | (30) | SLA Event Class | |
| EVENT_TYPE_CODE | VARCHAR2 | (30) | SLA Event Type |
BOM.CST_XLA_RCV_EVENT_MAP does not reference any database object
BOM.CST_XLA_RCV_EVENT_MAP is referenced by following:
| Description: | Temporary table is used in Costing SLA Upgrade to generate XLA entity_id, event_id, and header_id from XLA sequences for every XLA events. |
|---|
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SOURCE_ID_INT_1 | NUMBER | Source transaction identifier; it is used to populate XLA_TRANSACTION_ENTITIES.SOURCE_ID_INT_1. | ||
| SOURCE_ID_INT_2 | NUMBER | Source transaction identifier; it is used to populate XLA_TRANSACTION_ENTITIES.SOURCE_ID_INT_2. | ||
| SOURCE_ID_INT_3 | NUMBER | Source transaction identifier; it is used to populate XLA_TRANSACTION_ENTITIES.SOURCE_ID_INT_3. | ||
| SOURCE_ID_INT_4 | NUMBER | Source transaction identifier; it is used to populate XLA_TRANSACTION_ENTITIES.SOURCE_ID_INT_4. | ||
| SOURCE_ID_INT_5 | NUMBER | Source transaction identifier; for future use. | ||
| ENTITY_ID | NUMBER | XLA transaction entity identifier; it is used to populate XLA_TRANSACTION_ENTITIES.ENTITY_ID. It is populated by XLA_TRANSACTION_ENTITIES_S.nextval | ||
| EVENT_ID | NUMBER | XLA event identifier; it is used to populate XLA_EVENTS.EVENT_ID. It is populated by XLA_EVENTS_S.nextval | ||
| HEADER_ID | NUMBER | XLA journal entry header identifier; it is used to populate XLA_AE_HEADERS.HEADER_ID. It is populated by XLA_AE_HEADERS_S.nextval | ||
| LEGAL_ENTITY | NUMBER | Legal Entity identifier | ||
| ORG_ID | NUMBER | Operation Unit identifier |
BOM.CST_XLA_SEQ_GT does not reference any database object
BOM.CST_XLA_SEQ_GT is referenced by following:
| Description: | Table to map wip transactions to their corresponding event types. |
|---|
This table is used in SLA during processing of wip transactions. It serves as a lookup to find which event type and event class should be used based on the wip transaction type. Also, an attribute column exists to distinguish event types that cannot be uniquely determined from transaction type.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_TYPE_ID | NUMBER | TRANSACTION_TYPE from WIP_TRANSACTIONS | ||
| ATTRIBUTE | VARCHAR2 | (20) | Used to identify special situations like IPV transfer to WIP | |
| EVENT_CLASS_CODE | VARCHAR2 | (30) | SLA Event Class | |
| EVENT_TYPE_CODE | VARCHAR2 | (30) | SLA Event Type |
BOM.CST_XLA_WIP_EVENT_MAP does not reference any database object
BOM.CST_XLA_WIP_EVENT_MAP is referenced by following:
A Business Intelligence System view
This shows codes(designators) which can be used to define alternate
routings and bills of material for items.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_DESIGNATOR_CODE | VARCHAR2 | (10) | Alternate designator identifier | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | Name of the organization |
| DESCRIPTION | VARCHAR2 | (240) | Description of the alternate designator | |
| INACTIVE_DATE | DATE | Date inactive | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| UPDATED_ON | DATE | Y | Standard Who column | |
| UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATED_ON | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column |
APPS.BOMBV_ALTERNATE_BOM_CODES is not referenced by any database object
A Business Intelligence System view
This shows the product assembly structure. This structure classifies Bills of Material as manufacturing or engineering and reveals how lower level item
components are assembled into product configurations in a hierarchical
structure.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:BILL_ITEM_NAME | CHAR | (15) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| PENDING_FROM_ECO | VARCHAR2 | (10) | ||
| _LA:MANUFACTURING_BILL_FLAG | CHAR | (57) | ||
| ASSEMBLY_ITEM_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | Y | ||
| BILL_SEQUENCE_ID | NUMBER | Y | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | |||
| COMMON_BILL_SEQUENCE_ID | NUMBER | Y | ||
| COMMON_ORGANIZATION_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_BILL_OF_MATERIALS is not referenced by any database object
A Business Intelligence System view
This shows individual item components in a engineering or manufacturing
bill of material.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| START_EFFECTIVE_DATE | DATE | Y | Effective Start Date | |
| OPERATION_SEQUENCE_NUMBER | NUMBER | Y | Operation sequence number | |
| _KF:COMPONENT_ITEM_NAME | CHAR | (16) | ||
| _KF:BILL_ITEM_NAME | CHAR | (16) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | Organization name |
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | Alternate bill of material identifier | |
| ITEM_SEQUENCE_NUMBER | NUMBER | Sequence number for item | ||
| QUANTITY_PER_ASSEMBLY | NUMBER | Y | Quantity per assembly | |
| PROJECTED_YIELD | NUMBER | Y | ||
| COMMENTS | VARCHAR2 | (240) | ||
| ECO_IMPLEMENTATION_DATE | DATE | |||
| PLANNING_PERCENT | NUMBER | Y | ||
| MINIMUM_ALLOWED_QUANTITY | NUMBER | |||
| MAXIMUM_ALLOWED_QUANTITY | NUMBER | |||
| END_EFFECTIVE_DATE | DATE | |||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (30) | ||
| OPERATION_LEAD_TIME_PERCENT | VARCHAR2 | (30) | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (10) | ||
| TO_END_ITEM_UNIT_NUMBER | NUMBER | |||
| CHANGE_NOTICE | VARCHAR2 | (10) | ||
| _LA:INCLUDE_IN_COST_ROLLUP | CHAR | (60) | ||
| _LA:CHECK_ATP | CHAR | (47) | ||
| _LA:INCLUDE_ON_SHIP_DOCS | CHAR | (58) | ||
| _LA:MUTUALLY_EXCLUSIVE | CHAR | (64) | ||
| _LA:OPTIONAL | CHAR | (46) | ||
| _LA:QUANTITY_RELATED | CHAR | (54) | ||
| _LA:REQUIRED_FOR_REVENUE | CHAR | (58) | ||
| _LA:REQUIRED_TO_SHIP | CHAR | (54) | ||
| _LA:SHIPPING_ALLOWED | CHAR | (54) | ||
| _LA:SO_BASIS | CHAR | (46) | ||
| _LA:WIP_SUPPLY_TYPE | CHAR | (53) | ||
| _DF | CHAR | (35) | ||
| SUPPLY_LOCATOR_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | Y | ||
| ASSEMBLY_ITEM_ID | NUMBER | |||
| BILL_SEQUENCE_ID | NUMBER | Y | ||
| COMPONENT_ITEM_ID | NUMBER | |||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_BOM_COMPONENTS is not referenced by any database object
A Business Intelligence System view
This shows information about reference designators associated with a bill of
material component.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| REFERENCE_DESIGNATOR_NAME | VARCHAR2 | (15) | Y | |
| START_EFFECTIVITY_DATE | DATE | Y | ||
| OPERATION_SEQUENCE_NUMBER | NUMBER | Y | ||
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| _KF:BILL_ITEM_NAME | CHAR | (16) | ||
| _KF:COMPONENT_ITEM_NAME | CHAR | (16) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| COMMENT | VARCHAR2 | (240) | ||
| _LA:ACD_TYPE | CHAR | (46) | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_BOM_REFERE_DESIGNATORS is not referenced by any database object
A Business Intelligence System view
This shows the revision level of a bill of materials.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_REVISION | VARCHAR2 | (3) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NAME | CHAR | (15) | ||
| ECO_INITIATION_DATE | DATE | |||
| ECO_IMPLEMENTATION_DATE | DATE | |||
| START_EFFECTIVITY_DATE | DATE | Y | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | ||
| ALTERNATE_DESIGNATOR | VARCHAR2 | (0) | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_BOM_REVISIONS is not referenced by any database object
A Business Intelligence System view
This shows a component on an ECO which is either being added, deleted or
undergoing a revision change.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| START_EFFECTIVE_DATE | DATE | Y | ||
| OPERATION_SEQUENCE_NUMBER | NUMBER | Y | ||
| _KF:COMPONENT_ITEM_NAME | CHAR | (16) | ||
| _KF:BILL_ITEM_NAME | CHAR | (16) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| ITEM_SEQUENCE_NUMBER | NUMBER | |||
| QUANTITY_PER_ASSEMBLY | NUMBER | Y | ||
| PROJECTED_YIELD | NUMBER | Y | ||
| COMMENTS | VARCHAR2 | (240) | ||
| ECO_IMPLEMENTATION_DATE | DATE | |||
| PLANNING_PERCENT | NUMBER | Y | ||
| MINIMUM_ALLOWED_QUANTITY | NUMBER | |||
| MAXIMUM_ALLOWED_QUANTITY | NUMBER | |||
| END_EFFECTIVE_DATE | DATE | |||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | ||
| OPERATION_OFFSET_IN_ROUTING | NUMBER | |||
| _LA:INCLUDE_IN_COST_ROLLUP | CHAR | (60) | ||
| _LA:CHECK_ATP | CHAR | (47) | ||
| _LA:INCLUDE_ON_SHIP_DOCS | CHAR | (58) | ||
| _LA:MUTUALLY_EXCLUSIVE_OPT | CHAR | (64) | ||
| _LA:ACD_TYPE | CHAR | (46) | ||
| _LA:OPTIONAL | CHAR | (46) | ||
| _LA:QUANTITY_RELATED | CHAR | (54) | ||
| _LA:REQUIRED_FOR_REVENUE | CHAR | (58) | ||
| _LA:REQUIRED_TO_SHIP | CHAR | (54) | ||
| _LA:SHIPPING_ALLOWED | CHAR | (54) | ||
| _LA:SO_BASIS | CHAR | (46) | ||
| _LA:WIP_SUPPLY_TYPE | CHAR | (53) | ||
| SUPPLY_LOCATOR_ID | NUMBER | |||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | |||
| BILL_SEQUENCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| COMPONENT_ITEM_ID | NUMBER | |||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_ECO_REVISED_COMPONENTS is not referenced by any database object
A Business Intelligence System view
This shows bills of material for a component in an engineering or
prototype environment.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:BILL_ITEM_NAME | CHAR | (15) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| PENDING_FROM_ECO | VARCHAR2 | (10) | ||
| ASSEMBLY_ITEM_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | Y | ||
| BILL_SEQUENCE_ID | NUMBER | Y | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | |||
| COMMON_BILL_SEQUENCE_ID | NUMBER | Y | ||
| COMMON_ORGANIZATION_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_ENGINEERING_BOMS is not referenced by any database object
A Business Intelligence System view
This shows information about processes, events, routing
networks, line operations, yields and cycle times for a product which is
to be manufactured using flow manufacturing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NAME | CHAR | (15) | ||
| _LA:ENGINEERING_ROUTING_FLAG | CHAR | (47) | ||
| _LA:MIXED_MODEL_MAP_FLAG | CHAR | (55) | ||
| _LA:CAPABLE_TO_PROMISE_FLAG | CHAR | (43) | ||
| COMMENT | VARCHAR2 | (240) | ||
| ROUTING_PRIORITY | NUMBER | |||
| TOTAL_CYCLE_TIME | NUMBER | |||
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | |||
| ASSEMBLY_ITEM_ID | NUMBER | Y | ||
| COMMON_ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| COMPLETION_SUBINVENTORY | VARCHAR2 | (10) | ||
| COMPLETION_LOCATOR_ID | NUMBER | |||
| LINE_ID | NUMBER | |||
| PROJECT_ID | NUMBER | |||
| TASK_ID | NUMBER | |||
| CREATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.BOMBV_FLOW_ROUTINGS is not referenced by any database object
A Business Intelligence System view
This shows information about events, yields and cycle times for a
product which is to be manufactured using flow manufacturing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_NUMBER | NUMBER | Y | ||
| START_EFFECTIVE_DATE | DATE | Y | ||
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ROUTING_ITEM_NAME | CHAR | (15) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| END_EFFECTIVE_DATE | DATE | |||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | |||
| OPERATION_YIELD | NUMBER | |||
| OPERATION_CUMULATIVE_YIELD | NUMBER | |||
| REVERSE_CUMULATIVE_YIELD | NUMBER | |||
| CALCULATED_LABOR_TIME | NUMBER | |||
| CALCULATED_MACHINE_TIME | NUMBER | |||
| CALCULATED_ELAPSED_TIME | NUMBER | |||
| ENTERED_LABOR_TIME | NUMBER | |||
| ENTERED_MACHINE_TIME | NUMBER | |||
| USER_ELAPSED_TIME | NUMBER | |||
| NET_PLANNING_PERCENT | NUMBER | |||
| _LA:COUNT_POINT_TYPE | CHAR | (64) | ||
| _LA:BACKFLUSH_RESOURCE_FLAG | CHAR | (52) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (59) | ||
| _LA:REFERENCE_FLAG | CHAR | (52) | ||
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| OPERATION_SEQUENCE_ID | NUMBER | Y | ||
| STANDARD_OPERATION_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | Y | ||
| LINE_OP_SEQ_ID | NUMBER | |||
| PROCESS_OP_SEQ_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_FLOW_ROUTING_EVENTS is not referenced by any database object
A Business Intelligence System view
This shows information about processes, yields and cycle times
for a product which is to be manufactured using flow manufacturing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_NUMBER | NUMBER | Y | ||
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_NAME | VARCHAR2 | (3) | ||
| ORGANIZATION_CODE | VARCHAR2 | (240) | Y | |
| START_EFFECTIVE_DATE | DATE | Y | ||
| _KF:ROUTING_ITEM_NAME | CHAR | (15) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | |||
| OPERATION_YIELD | NUMBER | |||
| OPERATION_CUMULATIVE_YIELD | NUMBER | |||
| REVERSE_CUMULATIVE_YIELD | NUMBER | |||
| END_EFFECTIVE_DATE | DATE | |||
| CALCULATED_LABOR_TIME | NUMBER | |||
| CALCULATED_MACHINE_TIME | NUMBER | |||
| CALCULATED_ELAPSED_TIME | NUMBER | |||
| ENTERED_LABOR_TIME | NUMBER | |||
| ENTERED_MACHINE_TIME | NUMBER | |||
| USER_ELAPSED_TIME | NUMBER | |||
| NET_PLANNING_PERCENT | NUMBER | |||
| _LA:COUNT_POINT_TYPE | CHAR | (61) | ||
| _LA:BACKFLUSH_RESOURCE_FLAG | CHAR | (49) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (56) | ||
| _LA:REFERENCE_FLAG | CHAR | (49) | ||
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| OPERATION_SEQUENCE_ID | NUMBER | Y | ||
| STANDARD_OPERATION_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_FLOW_ROUTING_PROCESSES is not referenced by any database object
A Business Intelligence System view
This shows information about line operations, yields and cycle times
for a product which is to be manufactured using flow manufacturing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_NUMBER | NUMBER | Y | ||
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ROUTING_ITEM_NAME | CHAR | (15) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| START_EFFECTIVE_DATE | DATE | Y | ||
| END_EFFECTIVE_DATE | DATE | |||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | |||
| OPERATION_YIELD | NUMBER | |||
| OPERATION_CUMULATIVE_YIELD | NUMBER | |||
| REVERSE_CUMULATIVE_YIELD | NUMBER | |||
| CALCULATED_LABOR_TIME | NUMBER | |||
| CALCULATED_MACHINE_TIME | NUMBER | |||
| CALCULATED_ELAPSED_TIME | NUMBER | |||
| ENTERED_LABOR_TIME | NUMBER | |||
| ENTERED_MACHINE_TIME | NUMBER | |||
| USER_ELAPSED_TIME | NUMBER | |||
| NET_PLANNING_PERCENT | NUMBER | |||
| _LA:COUNT_POINT_TYPE | CHAR | (61) | ||
| _LA:BACKFLUSH_RESOURCE_FLAG | CHAR | (49) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (56) | ||
| _LA:REFERENCE_FLAG | CHAR | (49) | ||
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| OPERATION_SEQUENCE_ID | NUMBER | Y | ||
| STANDARD_OPERATION_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_FLOW_RTG_LINE_OPERATIONS is not referenced by any database object
A Business Intelligence System view
This shows information about manufacturing resources that are
considered part of an internal organization.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| INACTIVE_DATE | DATE | |||
| UNIT_OF_MEASURE | VARCHAR2 | (3) | ||
| _LA:AUTOCHARGE_TYPE | CHAR | (62) | ||
| _LA:COST_CODE_TYPE | CHAR | (60) | ||
| _LA:DEFAULT_BASIS_TYPE | CHAR | (55) | ||
| _LA:RESOURCE_TYPE | CHAR | (58) | ||
| _LA:ALLOW_COSTS_FLAG | CHAR | (54) | ||
| _LA:STANDARD_RATE_FLAG | CHAR | (56) | ||
| _LA:FUNCTIONAL_CURRENCY_FLAG | CHAR | (62) | ||
| RESOURCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| COST_ELEMENT_ID | NUMBER | Y | ||
| DEFAULT_ACTIVITY_ID | NUMBER | |||
| ABSORPTION_ACCOUNT | NUMBER | |||
| RATE_VARIANCE_ACCOUNT | NUMBER | |||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_INTERNAL_MFG_RESOURCES is not referenced by any database object
A Business Intelligence System view
This shows information about bills of material for an item in a
production or manufacturing environment.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:BILL_ITEM_NAME | CHAR | (15) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| PENDING_FROM_ECO | VARCHAR2 | (10) | ||
| ASSEMBLY_ITEM_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | Y | ||
| BILL_SEQUENCE_ID | NUMBER | Y | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | |||
| COMMON_BILL_SEQUENCE_ID | NUMBER | Y | ||
| COMMON_ORGANIZATION_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_MANUFACTURING_BOMS is not referenced by any database object
A Business Intelligence System view
This shows information about work centers, machine groups or assemblers where a product is manufactured.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LINE_NAME | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| INACTIVE_DATE | DATE | |||
| MINIMUM_HOURLY_RATE | NUMBER | Y | ||
| MAXIIMUM_HOURLY_RATE | NUMBER | Y | ||
| FIXED_LEAD_TIME | NUMBER | |||
| LINE_START_TIME | NUMBER | Y | ||
| LINE_STOP_TIME | NUMBER | Y | ||
| _LA:LINE_SCHEDULE_TYPE | CHAR | (62) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| LINE_ID | NUMBER | Y | ||
| ATP_RULE_ID | NUMBER | |||
| EXCEPTION_SET_NAME | VARCHAR2 | (10) | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_MANUFACTURING_LINES is not referenced by any database object
A Business Intelligence System view
This shows information about the area within an organization that
controls manufacturing operations.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| INACTIVE_DATE | DATE | |||
| DEPARTMENT_ID | NUMBER | Y | ||
| DEPARTMENT_CLASS_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| LOCATION_ID | NUMBER | |||
| PA_EXPENDITURE_ORG_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_MFG_DEPARTMENTS is not referenced by any database object
A Business Intelligence System view
This shows the classification of departments related to
manufacturing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_CLASS_CODE | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_MFG_DEPARTMENT_CLASSES is not referenced by any database object
A Business Intelligence System view
This shows the resources assigned to a department which can be used on routing operations.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| COST_CODE_TYPE | NUMBER | Y | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| CAPACITY_UNITS | NUMBER | |||
| RESOURCE_GROUP_NAME | VARCHAR2 | (30) | ||
| _LA:AVAILABLE_24_HOURS_FLAG | CHAR | (62) | ||
| _LA:SHARE_CAPACITY_FLAG | CHAR | (58) | ||
| _LA:CTP_FLAG | CHAR | (47) | ||
| EXCEPTION_SET_NAME | VARCHAR2 | (10) | ||
| SHARE_FROM_DEPT_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | Y | ||
| RESOURCE_ID | NUMBER | Y | ||
| ATP_RULE_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_MFG_DEPARTMENT_RESOURCES is not referenced by any database object
A Business Intelligence System view
This shows information about routing operations. Users may
define multiple operations for a routing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_NUMBER | NUMBER | Y | ||
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_NAME | VARCHAR2 | (3) | ||
| ORGANIZATION_CODE | VARCHAR2 | (240) | Y | |
| START_EFFECTIVE_DATE | DATE | Y | ||
| _KF:ROUTING_ITEM_NAME | CHAR | (15) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | |||
| OPERATION_YIELD | NUMBER | |||
| OPERATION_CUMULATIVE_YIELD | NUMBER | |||
| REVERSE_CUMULATIVE_YIELD | NUMBER | |||
| END_EFFECTIVE_DATE | DATE | |||
| CALCULATED_LABOR_TIME | NUMBER | |||
| CALCULATED_MACHINE_TIME | NUMBER | |||
| CALCULATED_ELAPSED_TIME | NUMBER | |||
| ENTERED_LABOR_TIME | NUMBER | |||
| ENTERED_MACHINE_TIME | NUMBER | |||
| USER_ELAPSED_TIME | NUMBER | |||
| NET_PLANNING_PERCENT | NUMBER | |||
| _LA:COUNT_POINT_TYPE | CHAR | (61) | ||
| _LA:BACKFLUSH_RESOURCE_FLAG | CHAR | (49) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (56) | ||
| _LA:REFERENCE_FLAG | CHAR | (49) | ||
| _LA:FLOW_OPERATION_TYPE | CHAR | (49) | ||
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| OPERATION_SEQUENCE_ID | NUMBER | Y | ||
| STANDARD_OPERATION_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_MFG_OPERATIONS is not referenced by any database object
A Business Intelligence System view
This shows information about man, machine or raw material resources
used to manufacture a product.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| INACTIVE_DATE | DATE | |||
| UNIT_OF_MEASURE | VARCHAR2 | (3) | ||
| _LA:AUTOCHARGE_TYPE | CHAR | (62) | ||
| _LA:COST_CODE_TYPE | CHAR | (60) | ||
| _LA:DEFAULT_BASIS_TYPE | CHAR | (55) | ||
| _LA:FUNCTIONAL_CURRENCY_FLAG | CHAR | (62) | ||
| _LA:ALLOW_COSTS_FLAG | CHAR | (54) | ||
| _LA:STANDARD_RATE_FLAG | CHAR | (56) | ||
| _LA:RESOURCE_TYPE | CHAR | (58) | ||
| RESOURCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| PURCHASE_ITEM_ID | NUMBER | |||
| COST_ELEMENT_ID | NUMBER | Y | ||
| DEFAULT_ACTIVITY_ID | NUMBER | |||
| ABSORPTION_ACCOUNT | NUMBER | |||
| RATE_VARIANCE_ACCOUNT | NUMBER | |||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_MFG_RESOURCES is not referenced by any database object
A Business Intelligence System view
This shows information about shifts that users assign to a resource.
If the resource is not a 24- hour resource, users can assign multiple
shifts to the resource.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SHIFT_NUMBER | NUMBER | Y | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| RESOURCE_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_MFG_RESOURCE_SHIFTS is not referenced by any database object
A Business Intelligence System view
This shows information about capacity modifications for a resource on a shift in a department. Users can make multiple resource modifications for a shift.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SHIFT_NUMBER | NUMBER | Y | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| CAPACITY_CHANGE_START_DATE | DATE | Y | ||
| CAPACITY_CHANGE_END_DATE | DATE | |||
| CAPACITY_CHANGE_START_TIME | NUMBER | |||
| CAPACITY_CHANGE_END_TIME | NUMBER | |||
| _LA:CAPACITY_CHANGE_TYPE | CHAR | (46) | ||
| SIMULATION_SET | VARCHAR2 | (10) | Y | |
| CAPACITY_CHANGE | NUMBER | |||
| RESOURCE_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_MFG_SHIFT_MODIFICATIONS is not referenced by any database object
A Business Intelligence System view
This shows information about the standard activity or set of
activities used to manufacture a product.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_CODE | VARCHAR2 | (4) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| DESCRIPTION | VARCHAR2 | (240) | ||
| SEQUENCE_NUMBER | NUMBER | |||
| _LA:COUNT_POINT_TYPE | CHAR | (64) | ||
| _LA:BACKFLUSH_FLAG | CHAR | (52) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (59) | ||
| _LA:FLOW_OPERATION_TYPE | CHAR | (60) | ||
| STANDARD_OPERATION_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| LINE_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_MFG_STANDARD_OPERATIONS is not referenced by any database object
A Business Intelligence System view
This shows information about the network of processes or operations and
the order they need to be performed to manufacture a product.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| _KF:ROUTING_FROM_ITEM_NAME | CHAR | (17) | ||
| _KF:ROUTING_TO_ITEM_NAME | CHAR | (17) | ||
| FROM_OPERATION_SEQ_NUM | NUMBER | Y | ||
| FROM_OPRATN_EFFECTIVITY_DATE | DATE | Y | ||
| TO_OPERATION_SEQ_NUM | NUMBER | Y | ||
| TO_OPRATN_EFFECTIVITY_DATE | DATE | Y | ||
| FROM_ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| TO_ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| FROM_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| FROM_ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| TO_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| TO_ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| CONNECTION_TYPE | NUMBER | |||
| PLANNING_PERCENT | NUMBER | |||
| START_EFFECTIVITY_DATE | DATE | |||
| END_EFFECTIVITY_DATE | DATE | |||
| FROM_ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| TO_ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| FROM_OP_SEQ_ID | NUMBER | Y | ||
| TO_OP_SEQ_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_OPERATION_NETWORKS is not referenced by any database object
A Business Intelligence System view
This shows information about resources used in an operation that is
performed outside of an organization.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| INACTIVE_DATE | DATE | |||
| UNIT_OF_MEASURE | VARCHAR2 | (3) | ||
| _LA:AUTOCHARGE_TYPE | CHAR | (62) | ||
| _LA:COST_CODE_TYPE | CHAR | (60) | ||
| _LA:DEFAULT_BASIS_TYPE | CHAR | (55) | ||
| _LA:FUNCTIONAL_CURRENCY_FLAG | CHAR | (62) | ||
| _LA:ALLOW_COSTS_FLAG | CHAR | (54) | ||
| _LA:STANDARD_RATE_FLAG | CHAR | (56) | ||
| _LA:RESOURCE_TYPE | CHAR | (58) | ||
| RESOURCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| PURCHASE_ITEM_ID | NUMBER | |||
| COST_ELEMENT_ID | NUMBER | Y | ||
| DEFAULT_ACTIVITY_ID | NUMBER | |||
| ABSORPTION_ACCOUNT | NUMBER | |||
| RATE_VARIANCE_ACCOUNT | NUMBER | |||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_OUTSIDE_OPRATN_RESOURCES is not referenced by any database object
A Business Intelligence System view
This shows information about the sequence of manufacturing operations
that are performed to manufacture an assembly.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NAME | CHAR | (15) | ||
| _LA:ENGINEERING_ROUTING_FLAG | CHAR | (47) | ||
| _LA:MIXED_MODEL_MAP_FLAG | CHAR | (55) | ||
| _LA:CAPABLE_TO_PROMISE_FLAG | CHAR | (43) | ||
| _LA:FLOW_ROUTING_FLAG | CHAR | (51) | ||
| COMMENT | VARCHAR2 | (240) | ||
| ROUTING_PRIORITY | NUMBER | |||
| TOTAL_CYCLE_TIME | NUMBER | |||
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | |||
| ASSEMBLY_ITEM_ID | NUMBER | Y | ||
| COMMON_ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| COMPLETION_SUBINVENTORY | VARCHAR2 | (10) | ||
| COMPLETION_LOCATOR_ID | NUMBER | |||
| LINE_ID | NUMBER | |||
| PROJECT_ID | NUMBER | |||
| TASK_ID | NUMBER | |||
| CREATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.BOMBV_ROUTINGS is not referenced by any database object
A Business Intelligence System view
This shows information about the revision levels of routings. When
a routing is defined, a revision must be entered, so that every routing has at least one valid revision.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| REVISION | VARCHAR2 | (3) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ROUTING_ITEM_NAME | CHAR | (15) | ||
| ECO_INITIATION_DATE | DATE | |||
| IMPLEMENTATION_DATE | DATE | |||
| START_EFFECTIVE_DATE | DATE | Y | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | ||
| ALTERNATE_DESIGNATOR | VARCHAR2 | (0) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_ROUTING_REVISIONS is not referenced by any database object
A Business Intelligence System view
This shows information about resources used by an operation which
is listed in at least one routing step used to build an assembly.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_SEQUENCE_NUMBER | NUMBER | Y | ||
| OPERATION_SEQUENCE_NUMBER | NUMBER | Y | ||
| EFFECTIVE_START_DATE | DATE | Y | ||
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_NAME | VARCHAR2 | (3) | ||
| ORGANIZATION_CODE | VARCHAR2 | (240) | Y | |
| _KF:ROUTING_ITEM_NAME | CHAR | (15) | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | ||
| INVERSE_RATE_OR_AMOUNT | NUMBER | Y | ||
| ASSIGNED_UNITS | NUMBER | Y | ||
| OFFSET_PERCENT | NUMBER | |||
| _LA:AUTOCHARGE_FLAG | CHAR | (59) | ||
| _LA:RESOURCE_BASIS_TYPE | CHAR | (44) | ||
| _LA:SCHEDULE_FLAG | CHAR | (64) | ||
| _LA:STANDARD_RATE_FLAG | CHAR | (53) | ||
| OPERATION_SEQUENCE_ID | NUMBER | Y | ||
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| RESOURCE_ID | NUMBER | Y | ||
| ACTIVITY_ID | NUMBER | |||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.BOMBV_RTG_OPERATION_RESOURCES is not referenced by any database object
A Business Intelligence System view
This shows information about a standard activity or set of activities which are used to
manufacture a product without using flow manufacturing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_CODE | VARCHAR2 | (4) | Y | |
| ORGANIZATION_NAME | VARCHAR2 | (3) | ||
| ORGANIZATION_CODE | VARCHAR2 | (240) | Y | |
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| DESCRIPTION | VARCHAR2 | (240) | ||
| _LA:COUNT_POINT_TYPE | CHAR | (64) | ||
| _LA:BACKFLUSH_FLAG | CHAR | (52) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (59) | ||
| STANDARD_OPERATION_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_STANDARD_RTG_OPERATIONS is not referenced by any database object
A Business Intelligence System view
This shows information about basic granular tasks within processes,
events and line operations that define physical activities on a manufacturing line.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_CODE | VARCHAR2 | (4) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| DESCRIPTION | VARCHAR2 | (240) | ||
| SEQUENCE_NUMBER | NUMBER | |||
| _LA:COUNT_POINT_TYPE | CHAR | (64) | ||
| _LA:BACKFLUSH_FLAG | CHAR | (52) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (59) | ||
| _LA:OPERATION_TYPE | CHAR | (60) | ||
| STANDARD_OPERATION_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| LINE_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_STD_FLOW_RTG_OPERATIONS is not referenced by any database object
A Business Intelligence System view
This shows information about resources which are used by a basic or
typical operation that is included in at least one routing steps in order
to build an assembly.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_SEQUENCE_NUMBER | NUMBER | Y | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| OPERATION_CODE | VARCHAR2 | (4) | Y | |
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | ||
| INVERSE_RATE_OR_AMOUNT | NUMBER | Y | ||
| ASSIGNED_UNITS | NUMBER | |||
| _LA:AUTOCHARGE_TYPE | CHAR | (62) | ||
| _LA:BASIS_TYPE | CHAR | (47) | ||
| _LA:SCHEDULE_FLAG | CHAR | (51) | ||
| _LA:STANDARD_RATE_FLAG | CHAR | (56) | ||
| STANDARD_OPERATION_ID | NUMBER | Y | ||
| RESOURCE_ID | NUMBER | Y | ||
| ACTIVITY_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_STD_OPRATN_RESOURCES is not referenced by any database object
A Business Intelligence System view
This shows information about component items that may be
substituted for another component item on a particular bill of
materials.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| START_EFFECTIVITY_DATE | DATE | Y | ||
| OPERATION_SEQUENCE_NUMBER | NUMBER | Y | ||
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| _KF:COMPONENT_ITEM_NAME | CHAR | (16) | ||
| _KF:BILL_ITEM_NAME | CHAR | (16) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| SUBSTITUTE_ITEM_QUANTITY | NUMBER | Y | ||
| _LA:ACD_TYPE | CHAR | (46) | ||
| SUBSTITUTE_COMPONENT_ID | NUMBER | Y | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_SUBSTITUTE_BOM_COMPS is not referenced by any database object
A Business Intelligence System view
This shows information about a sequence of non-flow manufacturing
operations that are performed to manufacture an assembly.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NAME | CHAR | (15) | ||
| _LA:ENGINEERING_ROUTING_FLAG | CHAR | (47) | ||
| _LA:CAPABLE_TO_PROMISE_FLAG | CHAR | (43) | ||
| ROUTING_PRIORITY | NUMBER | |||
| COMMENT | VARCHAR2 | (240) | ||
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | |||
| ASSEMBLY_ITEM_ID | NUMBER | Y | ||
| COMMON_ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| COMPLETION_SUBINVENTORY | VARCHAR2 | (10) | ||
| COMPLETION_LOCATOR_ID | NUMBER | |||
| CREATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.BOMBV_WORK_ORDER_ROUTINGS is not referenced by any database object
A Business Intelligence System view
This shows information about routing operations which are not
events, processes or line operations for flow manufacturing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_NUMBER | NUMBER | Y | ||
| START_EFFECTIVE_DATE | DATE | Y | ||
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ROUTING_ITEM_NAME | CHAR | (15) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| END_EFFECTIVE_DATE | DATE | |||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | |||
| OPERATION_YIELD | NUMBER | |||
| _LA:COUNT_POINT_TYPE | CHAR | (61) | ||
| _LA:BACKFLUSH_RESOURCE_FLAG | CHAR | (49) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (56) | ||
| _LA:REFERENCE_FLAG | CHAR | (49) | ||
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| OPERATION_SEQUENCE_ID | NUMBER | Y | ||
| STANDARD_OPERATION_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMBV_WORK_ORDER_RTG_OPRATNS is not referenced by any database object
A Business Intelligence System view
This shows codes(designators) which can be used to define alternate
routings and bills of material for items.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_DESIGNATOR_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| INACTIVE_DATE | DATE | |||
| _DF | CHAR | (36) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_ALTERNATE_BOM_CODES is not referenced by any database object
A Business Intelligence System view
This show the product assembly structure. This structure classifies bills of material as manufacturing or engineering and reveals how lower level item components are assembled into product configurations in a hierarchical structure.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:BILL_ITEM_NAME | CHAR | (16) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| PENDING_FROM_ECO | VARCHAR2 | (10) | ||
| COMMON_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| COMMON_ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:COMMON_BILL_ITEM_NAME | CHAR | (16) | ||
| PROJECT_NAME | VARCHAR2 | (30) | ||
| TASK_NAME | VARCHAR2 | (25) | ||
| _LA:MANUFACTURING_BILL_FLAG | CHAR | (58) | ||
| _DF | CHAR | (33) | ||
| COMMON_ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| ASSEMBLY_ITEM_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | Y | ||
| BILL_SEQUENCE_ID | NUMBER | Y | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | |||
| COMMON_BILL_SEQUENCE_ID | NUMBER | Y | ||
| COMMON_ORGANIZATION_ID | NUMBER | |||
| PROJECT_ID | NUMBER | |||
| TASK_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_BILL_OF_MATERIALS is not referenced by any database object
A Business Intelligence System view
This shows individual item components in a engineering or manufacturing
bill of material.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| START_EFFECTIVE_DATE | DATE | Y | ||
| OPERATION_SEQUENCE_NUMBER | NUMBER | Y | ||
| _KF:COMPONENT_ITEM_NAME | CHAR | (16) | ||
| _KF:BILL_ITEM_NAME | CHAR | (16) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| ITEM_SEQUENCE_NUMBER | NUMBER | |||
| QUANTITY_PER_ASSEMBLY | NUMBER | Y | ||
| PROJECTED_YIELD | NUMBER | Y | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | ||
| COMMENTS | VARCHAR2 | (240) | ||
| ECO_IMPLEMENTATION_DATE | DATE | |||
| PLANNING_PERCENT | NUMBER | Y | ||
| MINIMUM_ALLOWED_QUANTITY | NUMBER | |||
| MAXIMUM_ALLOWED_QUANTITY | NUMBER | |||
| END_EFFECTIVE_DATE | DATE | |||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| OPERATION_OFFSET_IN_ROUTING | NUMBER | |||
| _KF:SUPPLY_LOCATOR_NAME | CHAR | (15) | ||
| _LA:INCLUDE_IN_COST_ROLLUP | CHAR | (60) | ||
| _LA:CHECK_ATP | CHAR | (47) | ||
| _LA:INCLUDE_ON_SHIP_DOCS | CHAR | (58) | ||
| _LA:MUTUALLY_EXCLUSIVE_OPT | CHAR | (64) | ||
| _LA:OPTIONAL | CHAR | (46) | ||
| _LA:QUANTITY_RELATED | CHAR | (54) | ||
| _LA:REQUIRED_FOR_REVENUE | CHAR | (58) | ||
| _LA:REQUIRED_TO_SHIP | CHAR | (54) | ||
| _LA:SHIPPING_ALLOWED | CHAR | (54) | ||
| _LA:SO_BASIS | CHAR | (46) | ||
| _LA:WIP_SUPPLY_TYPE | CHAR | (53) | ||
| _DF | CHAR | (35) | ||
| SUPPLY_LOCATOR_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | Y | ||
| ASSEMBLY_ITEM_ID | NUMBER | |||
| BILL_SEQUENCE_ID | NUMBER | Y | ||
| COMPONENT_ITEM_ID | NUMBER | |||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_BOM_COMPONENTS is not referenced by any database object
A Business Intelligence System view
This shows Information about reference designators associated with a bill of
material component.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| REFERENCE_DESIGNATOR_NAME | VARCHAR2 | (15) | Y | |
| START_EFFECTIVITY_DATE | DATE | Y | ||
| OPERATION_SEQUENCE_NUMBER | NUMBER | Y | ||
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| _KF:BILL_ITEM_NAME | CHAR | (16) | ||
| _KF:COMPONENT_ITEM_NAME | CHAR | (16) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| COMMENT | VARCHAR2 | (240) | ||
| _LA:ACD_TYPE | CHAR | (46) | ||
| _DF | CHAR | (36) | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_BOM_REFERE_DESIGNATORS is not referenced by any database object
A Business Intelligence System view
This shows the revision level of a bill of materials.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_REVISION | VARCHAR2 | (3) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ECO_INITIATION_DATE | DATE | |||
| ECO_IMPLEMENTATION_DATE | DATE | |||
| START_EFFECTIVITY_DATE | DATE | Y | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | ||
| ALTERNATE_DESIGNATOR | VARCHAR2 | (0) | ||
| _KF:ITEM_NAME | CHAR | (16) | ||
| _KF:ECO_REVISED_ITEM_NAME | CHAR | (16) | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_BOM_REVISIONS is not referenced by any database object
A Business Intelligence System view
This shows a component on an ECO which is either being added, deleted or
undergoing a revision change.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| START_EFFECTIVE_DATE | DATE | Y | ||
| OPERATION_SEQUNECE_NUMBER | NUMBER | Y | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| _KF:COMPONENT_ITEM_NAME | CHAR | (16) | ||
| _KF:BILL_ITEM_NAME | CHAR | (16) | ||
| ITEM_SEQUNECE_NUMBER | NUMBER | |||
| QUANTITY_PER_ASSEMBLY | NUMBER | Y | ||
| PROJECTED_YIELD | NUMBER | Y | ||
| COMMENTS | VARCHAR2 | (240) | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | ||
| IMPLEMENTATION_DATE | DATE | |||
| END_EFFECTIVE_DATE | DATE | |||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| PLANNING_FACTOR | NUMBER | Y | ||
| MINIMUM_ALLOWED_QUANTITY | NUMBER | |||
| MAXIMUM_ALLOWED_QUANTITY | NUMBER | |||
| OPERATION_OFFSET_IN_ROUTING | NUMBER | |||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | ||
| _LA:BOM_ITEM_TYPE | CHAR | (55) | ||
| _LA:INCLUDE_IN_COST_ROLLUP | CHAR | (61) | ||
| _LA:CHECK_ATP | CHAR | (48) | ||
| _LA:INCLUDE_ON_SHIP_DOCS | CHAR | (59) | ||
| _LA:MUTUALLY_EXCLUSIVE_OPT | CHAR | (65) | ||
| _LA:OPTIONAL | CHAR | (47) | ||
| _LA:QUANTITY_RELATED | CHAR | (55) | ||
| _LA:REQUIRED_FOR_REVENUE | CHAR | (59) | ||
| _LA:REQUIRED_TO_SHIP | CHAR | (55) | ||
| _LA:SHIPPING_ALLOWED | CHAR | (55) | ||
| _LA:SO_BASIS | CHAR | (49) | ||
| _LA:WIP_SUPPLY_TYPE | CHAR | (54) | ||
| _LA:ACD_TYPE | CHAR | (47) | ||
| _KF:REVISED_ITEM_NAME | CHAR | (16) | ||
| _KF:SUPPLY_LOCATOR_NAME | CHAR | (15) | ||
| _DF | CHAR | (36) | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | ||
| COMPONENT_ITEM_ID | NUMBER | |||
| OLD_COMPONENT_SEQUENCE_ID | NUMBER | |||
| SUPPLY_LOCATOR_ID | NUMBER | Y | ||
| BILL_SEQUENCE_ID | NUMBER | |||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | |||
| ASSEMBLY_ITEM_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.BOMFV_ECO_REVISED_COMPONENTS is not referenced by any database object
A Business Intelligence System view
This shows bills of material for a component in an engineering or
prototype environment.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:BILL_ITEM_NAME | CHAR | (16) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| PENDING_FROM_ECO | VARCHAR2 | (10) | ||
| COMMON_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| COMMON_ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:COMMON_BILL_ITEM_NAME | CHAR | (16) | ||
| PROJECT_NAME | VARCHAR2 | (30) | ||
| TASK_NAME | VARCHAR2 | (25) | ||
| _DF | CHAR | (33) | ||
| ASSEMBLY_ITEM_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | Y | ||
| BILL_SEQUENCE_ID | NUMBER | Y | ||
| COMMON_ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | |||
| COMMON_BILL_SEQUENCE_ID | NUMBER | Y | ||
| COMMON_ORGANIZATION_ID | NUMBER | |||
| PROJECT_ID | NUMBER | |||
| TASK_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_ENGINEERING_BOMS is not referenced by any database object
A Business Intelligence System view
This shows information about processes, events, routing
networks, line operations, yields and cycle times for a product which is
to be manufactured using flow manufacturing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NAME | CHAR | (15) | ||
| TOTAL_CYCLE_TIME | NUMBER | |||
| ROUTING_PRIORITY | NUMBER | |||
| COMMENT | VARCHAR2 | (240) | ||
| _LA:ENGINEERING_ROUTING_FLAG | CHAR | (50) | ||
| _LA:MIXED_MODEL_MAP_FLAG | CHAR | (58) | ||
| _LA:CAPABLE_TO_PROMISE_FLAG | CHAR | (46) | ||
| COMMON_ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| _KF:COMMON_ROUTING_NAME | CHAR | (16) | ||
| _KF:COMPLETION_LOCATOR_CODE | CHAR | (15) | ||
| LINE_NAME | VARCHAR2 | (10) | Y | |
| PROJECT_NAME | VARCHAR2 | (30) | ||
| TASK_NAME | VARCHAR2 | (20) | ||
| _DF | CHAR | (35) | ||
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | |||
| ASSEMBLY_ITEM_ID | NUMBER | Y | ||
| COMMON_ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| COMPLETION_SUBINVENTORY | VARCHAR2 | (10) | ||
| COMPLETION_LOCATOR_ID | NUMBER | |||
| LINE_ID | NUMBER | |||
| PROJECT_ID | NUMBER | |||
| TASK_ID | NUMBER | |||
| CREATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.BOMFV_FLOW_ROUTINGS is not referenced by any database object
A Business Intelligence System view
This shows information about events, yields and cycle times
for a product which is to be manufactured using flow manufacturing concept.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_NUMBER | NUMBER | Y | ||
| START_EFFECTIVE_DATE | DATE | Y | ||
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ROUTING_ITEM_NAME | CHAR | (16) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| END_EFFECTIVE_DATE | DATE | |||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | |||
| _LA:COUNT_POINT_TYPE | CHAR | (65) | ||
| _LA:BACKFLUSH_FLAG | CHAR | (53) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (60) | ||
| _LA:REFERENCE_FLAG | CHAR | (53) | ||
| OPERATION_YIELD | NUMBER | |||
| OPERATION_CUMULATIVE_YIELD | NUMBER | |||
| REVERSE_CUMULATIVE_YIELD | NUMBER | |||
| CALCULATED_LABOR_TIME | NUMBER | |||
| CALCULATED_MACHINE_TIME | NUMBER | |||
| CALCULATED_ELAPSED_TIME | NUMBER | |||
| ENTERED_LABOR_TIME | NUMBER | |||
| ENTERED_MACHINE_TIME | NUMBER | |||
| USER_ELAPSED_TIME | NUMBER | |||
| NET_PLANNING_PERCENT | NUMBER | |||
| _KF:PROCESS_NAME | CHAR | (16) | ||
| _KF:LINE_OPERATION_NAME | CHAR | (16) | ||
| OPERATION_CODE | VARCHAR2 | (4) | ||
| LINEOP_ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| PROCESS_ALTERNATE_RTG_CODE | VARCHAR2 | (10) | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| OPERATION_SEQUENCE_ID | NUMBER | Y | ||
| STANDARD_OPERATION_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | Y | ||
| LINE_OP_SEQ_ID | NUMBER | |||
| PROCESS_OP_SEQ_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_FLOW_ROUTING_EVENTS is not referenced by any database object
A Business Intelligence System view
This shows information about processes, yields and cycle times for
a product which is to be manufactured using flow manufacturing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_NUMBER | NUMBER | Y | ||
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| START_EFFECTIVE_DATE | DATE | Y | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ROUTING_ITEM_NAME | CHAR | (15) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | |||
| END_EFFECTIVE_DATE | DATE | |||
| OPERATION_YIELD | NUMBER | |||
| OPERATION_CUMULATIVE_YIELD | NUMBER | |||
| REVERSE_CUMULATIVE_YIELD | NUMBER | |||
| CALCULATED_LABOR_TIME | NUMBER | |||
| CALCULATED_MACHINE_TIME | NUMBER | |||
| CALCULATED_ELAPSED_TIME | NUMBER | |||
| ENTERED_LABOR_TIME | NUMBER | |||
| ENTERED_MACHINE_TIME | NUMBER | |||
| USER_ELAPSED_TIME | NUMBER | |||
| NET_PLANNING_PERCENT | NUMBER | |||
| _LA:COUNT_POINT_TYPE | CHAR | (64) | ||
| _LA:BACKFLUSH_FLAG | CHAR | (52) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (59) | ||
| _LA:REFERENCE_FLAG | CHAR | (52) | ||
| OPERATION_CODE | VARCHAR2 | (4) | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| OPERATION_SEQUENCE_ID | NUMBER | Y | ||
| STANDARD_OPERATION_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_FLOW_ROUTING_PROCESSES is not referenced by any database object
A Business Intelligence System view
This shows information about line operations, yields and cycle
times for a product which is to be manufactured using flow manufacturing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_NUMBER | NUMBER | Y | ||
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| START_EFFECTIVE_DATE | DATE | Y | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ROUTING_ITEM_NAME | CHAR | (15) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | |||
| END_EFFECTIVE_DATE | DATE | |||
| OPERATION_YIELD | NUMBER | |||
| OPERATION_CUMULATIVE_YIELD | NUMBER | |||
| REVERSE_CUMULATIVE_YIELD | NUMBER | |||
| CALCULATED_LABOR_TIME | NUMBER | |||
| CALCULATED_MACHINE_TIME | NUMBER | |||
| CALCULATED_ELAPSED_TIME | NUMBER | |||
| ENTERED_LABOR_TIME | NUMBER | |||
| ENTERED_MACHINE_TIME | NUMBER | |||
| USER_ELAPSED_TIME | NUMBER | |||
| NET_PLANNING_PERCENT | NUMBER | |||
| _LA:COUNT_POINT_TYPE | CHAR | (64) | ||
| _LA:BACKFLUSH_FLAG | CHAR | (52) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (59) | ||
| _LA:REFERENCE_FLAG | CHAR | (52) | ||
| OPERATION_CODE | VARCHAR2 | (4) | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| OPERATION_SEQUENCE_ID | NUMBER | Y | ||
| STANDARD_OPERATION_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_FLOW_RTG_LINE_OPERATIONS is not referenced by any database object
A Business Intelligence System view
This shows information about manufacturing resources that are
considered part of an internal organization.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| INACTIVE_DATE | DATE | |||
| COST_ELEMENT | VARCHAR2 | (50) | Y | |
| UNIT_OF_MEASURE | VARCHAR2 | (3) | ||
| ABSORPTION_ACCOUNT | NUMBER | |||
| RATE_VARIANCE_ACCOUNT | NUMBER | |||
| ACTIVITY | VARCHAR2 | (10) | ||
| _LA:AUTOCHARGE_TYPE | CHAR | (62) | ||
| _LA:COST_CODE_TYPE | CHAR | (60) | ||
| _LA:DEFAULT_BASIS_TYPE | CHAR | (55) | ||
| _LA:RESOURCE_TYPE | CHAR | (58) | ||
| _LA:ALLOW_COSTS_FLAG | CHAR | (54) | ||
| _LA:STANDARD_RATE_FLAG | CHAR | (56) | ||
| _LA:FUNCTIONAL_CURRENCY_FLAG | CHAR | (62) | ||
| _DF | CHAR | (24) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| RESOURCE_ID | NUMBER | Y | ||
| COST_ELEMENT_ID | NUMBER | Y | ||
| DEFAULT_ACTIVITY_ID | NUMBER | |||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_INTERNAL_MFG_RESOURCES is not referenced by any database object
A Business Intelligence System view
This shows information about bills of material for an item in a
production or manufacturing environment.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:BILL_ITEM_NAME | CHAR | (16) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| COMMON_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| COMMON_ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:COMMON_BILL_ITEM_NAME | CHAR | (16) | ||
| PENDING_FROM_ECO | VARCHAR2 | (10) | ||
| PROJECT_NAME | VARCHAR2 | (30) | ||
| TASK_NAME | VARCHAR2 | (25) | ||
| _DF | CHAR | (33) | ||
| ASSEMBLY_ITEM_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | Y | ||
| BILL_SEQUENCE_ID | NUMBER | Y | ||
| COMMON_ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | |||
| COMMON_BILL_SEQUENCE_ID | NUMBER | Y | ||
| COMMON_ORGANIZATION_ID | NUMBER | |||
| PROJECT_ID | NUMBER | |||
| TASK_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_MANUFACTURING_BOMS is not referenced by any database object
A Business Intelligence System view
This shows information about work centers, machine groups or
or assembers where a product is manufactured.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LINE_NAME | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| INACTIVE_DATE | DATE | |||
| MINIMUM_HOURLY_RATE | NUMBER | Y | ||
| MAXIMUM_HOURLY_RATE | NUMBER | Y | ||
| FIXED_LEAD_TIME | NUMBER | |||
| LINE_START_TIME | NUMBER | Y | ||
| LINE_STOP_TIME | NUMBER | Y | ||
| _LA:LINE_SCHEDULE_TYPE | CHAR | (65) | ||
| RULE_NAME | VARCHAR2 | (80) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| LINE_ID | NUMBER | Y | ||
| ATP_RULE_ID | NUMBER | |||
| EXCEPTION_SET_NAME | VARCHAR2 | (10) | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_MANUFACTURING_LINES is not referenced by any database object
A Business Intelligence System view
This shows information about the area within an organization that
controls manufacturing operations.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| INACTIVE_DATE | DATE | |||
| DESCRIPTION | VARCHAR2 | (240) | ||
| EXPENDITURE_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| EXPENDITURE_ORGANIZATION_NAME | VARCHAR2 | (240) | ||
| LOCATION_NAME | VARCHAR2 | (60) | ||
| _DF | CHAR | (26) | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| DEPARTMENT_CLASS_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| LOCATION_ID | NUMBER | |||
| PA_EXPENDITURE_ORG_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_MFG_DEPARTMENTS is not referenced by any database object
A Business Intelligence System view
This shows the classification of departments related to
manufacturing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_CLASS_CODE | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| _DF | CHAR | (33) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_MFG_DEPARTMENT_CLASSES is not referenced by any database object
A Business Intelligence System view
This shows the resources assigned to a department which can
be used on routing operations.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| COST_CODE_TYPE | NUMBER | Y | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| CAPACITY_UNITS | NUMBER | |||
| RESOURCE_GROUP_NAME | VARCHAR2 | (30) | ||
| _LA:AVAILABLE_24_HOURS_FLAG | CHAR | (62) | ||
| _LA:SHARE_CAPACITY_FLAG | CHAR | (58) | ||
| _LA:CTP_FLAG | CHAR | (47) | ||
| SHARED_DEPARTMENT_CODE | VARCHAR2 | (10) | ||
| RULE_NAME | VARCHAR2 | (80) | ||
| _DF | CHAR | (36) | ||
| SHARE_FROM_DEPT_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | Y | ||
| RESOURCE_ID | NUMBER | Y | ||
| ATP_RULE_ID | NUMBER | |||
| EXCEPTION_SET_NAME | VARCHAR2 | (10) | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_MFG_DEPARTMENT_RESOURCES is not referenced by any database object
A Business Intelligence System view
This shows information about routing operations. Users may
define multiple operations for a routing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_NUMBER | NUMBER | Y | ||
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| START_EFFECTIVE_DATE | DATE | Y | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ROUTING_ITEM_NAME | CHAR | (15) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | |||
| END_EFFECTIVE_DATE | DATE | |||
| OPERATION_YIELD | NUMBER | |||
| OPERATION_CUMULATIVE_YIELD | NUMBER | |||
| REVERSE_CUMULATIVE_YIELD | NUMBER | |||
| CALCULATED_LABOR_TIME | NUMBER | |||
| CALCULATED_MACHINE_TIME | NUMBER | |||
| CALCULATED_ELAPSED_TIME | NUMBER | |||
| ENTERED_LABOR_TIME | NUMBER | |||
| ENTERED_MACHINE_TIME | NUMBER | |||
| USER_ELAPSED_TIME | NUMBER | |||
| NET_PLANNING_PERCENT | NUMBER | |||
| _LA:COUNT_POINT_TYPE | CHAR | (64) | ||
| _LA:BACKFLUSH_FLAG | CHAR | (52) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (59) | ||
| _LA:REFERENCE_FLAG | CHAR | (52) | ||
| _LA:FLOW_OPERATION_TYPE | CHAR | (52) | ||
| OPERATION_CODE | VARCHAR2 | (4) | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| OPERATION_SEQUENCE_ID | NUMBER | Y | ||
| STANDARD_OPERATION_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_MFG_OPERATIONS is not referenced by any database object
A Business Intelligence System view
This shows information about man, machine or raw material resources used to manufacture a product.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| INACTIVE_DATE | DATE | |||
| COST_ELEMENT | VARCHAR2 | (50) | Y | |
| ACTIVITY | VARCHAR2 | (10) | ||
| UNIT_OF_MEASURE | VARCHAR2 | (3) | ||
| ABSORPTION_ACCOUNT | NUMBER | |||
| RATE_VARIANCE_ACCOUNT | NUMBER | |||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | ||
| _LA:AUTOCHARGE_TYPE | CHAR | (62) | ||
| _LA:COST_CODE_TYPE | CHAR | (60) | ||
| _LA:DEFAULT_BASIS_TYPE | CHAR | (55) | ||
| _LA:RESOURCE_TYPE | CHAR | (58) | ||
| _LA:ALLOW_COSTS_FLAG | CHAR | (54) | ||
| _LA:STANDARD_RATE_FLAG | CHAR | (56) | ||
| _LA:FUNCTIONAL_CURRENCY_FLAG | CHAR | (62) | ||
| _KF:OUTSIDE_PROCESS_ITEM | CHAR | (15) | ||
| _DF | CHAR | (24) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| PURCHASE_ITEM_ID | NUMBER | |||
| RESOURCE_ID | NUMBER | Y | ||
| COST_ELEMENT_ID | NUMBER | Y | ||
| DEFAULT_ACTIVITY_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_MFG_RESOURCES is not referenced by any database object
A Business Intelligence System view
This shows information about shifts that users assign to a
resource. If the resource is not a 24-hour resource, users can
assign multiple shifts to the resource.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SHIFT_NUMBER | NUMBER | Y | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| _DF | CHAR | (30) | ||
| RESOURCE_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_MFG_RESOURCE_SHIFTS is not referenced by any database object
A Business Intelligence System view
This shows information about capacity modifications for a
resource on a shift in a department. Users can make multiple resource
modifications for a shift.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SHIFT_NUMBER | NUMBER | Y | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| CAPACITY_CHANGE_START_DATE | DATE | Y | ||
| CAPACITY_CHANGE_END_DATE | DATE | |||
| CAPACITY_CHANGE_START_TIME | NUMBER | |||
| CAPACITY_CHANGE_END_TIME | NUMBER | |||
| SIMULATION_SET | VARCHAR2 | (10) | Y | |
| _LA:CAPACITY_CHANGE_TYPE | CHAR | (46) | ||
| _DF | CHAR | (31) | ||
| CAPACITY_CHANGE | NUMBER | |||
| RESOURCE_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_MFG_SHIFT_MODIFICATIONS is not referenced by any database object
A Business Intelligence System view
This shows information about the standard activity or set of
activities used to manufacture a product.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_CODE | VARCHAR2 | (4) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| DESCRIPTION | VARCHAR2 | (240) | ||
| SEQUENCE_NUMBER | NUMBER | |||
| _LA:COUNT_POINT_TYPE | CHAR | (64) | ||
| _LA:BACKFLUSH_FLAG | CHAR | (52) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (59) | ||
| _LA:FLOW_OPERATION_TYPE | CHAR | (60) | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| LINE_CODE | VARCHAR2 | (10) | ||
| STANDARD_OPERATION_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| LINE_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_MFG_STANDARD_OPERATIONS is not referenced by any database object
A Business Intelligence System view
This shows information about the network of processes or operations and
the order they need to be performed to manufacture a product.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| _KF:ROUTING_TO_ITEM_NAME | CHAR | (16) | ||
| _KF:ROUTING_FROM_ITEM_NAME | CHAR | (16) | ||
| FROM_OPERATION_SEQ_NUM | NUMBER | Y | ||
| FROM_OPRATN_EFFECTIVITY_DATE | DATE | Y | ||
| TO_OPERATION_SEQ_NUM | NUMBER | Y | ||
| TO_OPRATN_EFFECTIVITY_DATE | DATE | Y | ||
| FROM_ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| TO_ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| FROM_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| FROM_ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| TO_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| TO_ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| CONNECTION_TYPE | NUMBER | |||
| PLANNING_PERCENT | NUMBER | |||
| START_EFFECTIVITY_DATE | DATE | |||
| END_EFFECTIVITY_DATE | DATE | |||
| FROM_ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| TO_ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| FROM_OP_SEQ_ID | NUMBER | Y | ||
| TO_OP_SEQ_ID | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_OPERATION_NETWORKS is not referenced by any database object
A Business Intelligence System view
This shows information about resource used in an operation that is
performed outside of an organization.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| INACTIVE_DATE | DATE | |||
| COST_ELEMENT | VARCHAR2 | (50) | Y | |
| ACTIVITY | VARCHAR2 | (10) | ||
| UNIT_OF_MEASURE | VARCHAR2 | (3) | ||
| ABSORPTION_ACCOUNT | NUMBER | |||
| RATE_VARIANCE_ACCOUNT | NUMBER | |||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | ||
| _LA:AUTOCHARGE_TYPE | CHAR | (62) | ||
| _LA:COST_CODE_TYPE | CHAR | (60) | ||
| _LA:DEFAULT_BASIS_TYPE | CHAR | (55) | ||
| _LA:RESOURCE_TYPE | CHAR | (58) | ||
| _LA:ALLOW_COSTS_FLAG | CHAR | (54) | ||
| _LA:STANDARD_RATE_FLAG | CHAR | (56) | ||
| _LA:FUNCTIONAL_CURRENCY_FLAG | CHAR | (62) | ||
| _KF:OUTSIDE_PROCESS_ITEM | CHAR | (15) | ||
| _DF | CHAR | (24) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| PURCHASE_ITEM_ID | NUMBER | |||
| RESOURCE_ID | NUMBER | Y | ||
| COST_ELEMENT_ID | NUMBER | Y | ||
| DEFAULT_ACTIVITY_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_OUTSIDE_OPRATN_RESOURCES is not referenced by any database object
A Business Intelligence System view
This shows information about the sequence of manufacturing operations
that are performed to manufacture an assembly.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NAME | CHAR | (15) | ||
| TOTAL_CYCLE_TIME | NUMBER | |||
| ROUTING_PRIORITY | NUMBER | |||
| COMMENT | VARCHAR2 | (240) | ||
| _LA:ENGINEERING_ROUTING_FLAG | CHAR | (50) | ||
| _LA:MIXED_MODEL_MAP_FLAG | CHAR | (58) | ||
| _LA:CAPABLE_TO_PROMISE_FLAG | CHAR | (46) | ||
| _LA:FLOW_ROUTING_FLAG | CHAR | (54) | ||
| COMMON_ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| _KF:COMMON_ROUTING_NAME | CHAR | (16) | ||
| _KF:COMPLETION_LOCATOR_CODE | CHAR | (15) | ||
| LINE_NAME | VARCHAR2 | (10) | ||
| PROJECT_NAME | VARCHAR2 | (30) | ||
| TASK_NAME | VARCHAR2 | (20) | ||
| _DF | CHAR | (35) | ||
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | |||
| ASSEMBLY_ITEM_ID | NUMBER | Y | ||
| COMMON_ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| COMPLETION_SUBINVENTORY | VARCHAR2 | (10) | ||
| COMPLETION_LOCATOR_ID | NUMBER | |||
| LINE_ID | NUMBER | |||
| PROJECT_ID | NUMBER | |||
| TASK_ID | NUMBER | |||
| CREATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.BOMFV_ROUTINGS is not referenced by any database object
A Business Intelligence System view
This shows information about the revision levels of routings. When
a routing is defined, a revision must be entered, so that every routing has at least one valid revision.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| REVISION | VARCHAR2 | (3) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ECO_INITIATION_DATE | DATE | |||
| IMPLEMENTATION_DATE | DATE | |||
| START_EFFECTIVE_DATE | DATE | Y | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | ||
| ALTERNATE_DESIGNATOR | VARCHAR2 | (0) | ||
| _KF:ROUTING_ITEM_NAME | CHAR | (15) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_ROUTING_REVISIONS is not referenced by any database object
A Business Intelligence System view
This shows information about resources used by an operation which
is listed in at least one routing step used to build an assembly.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_SEQUENCE_NUMBER | NUMBER | Y | ||
| OPERATION_SEQUENCE_NUMBER | NUMBER | Y | ||
| EFFECTIVE_START_DATE | DATE | Y | ||
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| _KF:ROUTING_ITEM_NAME | CHAR | (15) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | ||
| INVERSE_RATE_OR_AMOUNT | NUMBER | Y | ||
| ASSIGNED_UNITS | NUMBER | Y | ||
| OFFSET_PERCENT | NUMBER | |||
| _LA:AUTOCHARGE_FLAG | CHAR | (62) | ||
| _LA:RESOURCE_BASIS_TYPE | CHAR | (47) | ||
| _LA:SCHEDULE_FLAG | CHAR | (67) | ||
| _LA:STANDARD_RATE_FLAG | CHAR | (56) | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| ACTIVITY_NAME | VARCHAR2 | (10) | ||
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| OPERATION_SEQUENCE_ID | NUMBER | Y | ||
| RESOURCE_ID | NUMBER | Y | ||
| ACTIVITY_ID | NUMBER | |||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.BOMFV_RTG_OPERATION_RESOURCES is not referenced by any database object
A Business Intelligence System view
This shows information about a standard activity or set of
activities which are used to manufacture a product without using
flow manufacturing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_CODE | VARCHAR2 | (4) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| DESCRIPTION | VARCHAR2 | (240) | ||
| _LA:COUNT_POINT_TYPE | CHAR | (64) | ||
| _LA:BACKFLUSH_FLAG | CHAR | (52) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (59) | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| STANDARD_OPERATION_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_STANDARD_RTG_OPERATIONS is not referenced by any database object
A Business Intelligence System view
This shows information about basic granular tasks within
processes, events and line operations that define physical activities on
a manufacturing line.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_CODE | VARCHAR2 | (4) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| DESCRIPTION | VARCHAR2 | (240) | ||
| SEQUENCE_NUMBER | NUMBER | |||
| _LA:COUNT_POINT_TYPE | CHAR | (64) | ||
| _LA:BACKFLUSH_FLAG | CHAR | (52) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (59) | ||
| _LA:OPERATION_TYPE | CHAR | (60) | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| LINE_CODE | VARCHAR2 | (10) | Y | |
| STANDARD_OPERATION_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| LINE_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_STD_FLOW_RTG_OPERATIONS is not referenced by any database object
A Business Intelligence System view
This shows information about resources which are used by a basic or
typical operationthat is included in at least one routing step used to
build an assembly.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_SEQUENCE_NUMBER | NUMBER | Y | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| OPERATION_CODE | VARCHAR2 | (4) | Y | |
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | ||
| INVERSE_RATE_OR_AMOUNT | NUMBER | Y | ||
| ASSIGNED_UNITS | NUMBER | |||
| _LA:AUTOCHARGE_TYPE | CHAR | (63) | ||
| _LA:BASIS_TYPE | CHAR | (48) | ||
| _LA:SCHEDULE_FLAG | CHAR | (52) | ||
| _LA:STANDARD_RATE_FLAG | CHAR | (57) | ||
| ACTIVITY | VARCHAR2 | (10) | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| STANDARD_OPERATION_ID | NUMBER | Y | ||
| RESOURCE_ID | NUMBER | Y | ||
| ACTIVITY_ID | NUMBER | |||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_STD_OPRATN_RESOURCES is not referenced by any database object
A Business Intelligence System view
This shows information about component items that may be
substituted for another component item on a particular bill of
materials.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| START_EFFECTIVITY_DATE | DATE | Y | ||
| OPERATION_SEQUENCE_NUMBER | NUMBER | Y | ||
| ALTERNATE_BOM_CODE | VARCHAR2 | (10) | ||
| _KF:COMPONENT_ITEM_NAME | CHAR | (16) | ||
| _KF:BILL_ITEM_NAME | CHAR | (16) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| SUBSTITUTE_ITEM_QUANTITY | NUMBER | Y | ||
| _LA:ACD_TYPE | CHAR | (46) | ||
| _DF | CHAR | (36) | ||
| SUBSTITUTE_COMPONENT_ID | NUMBER | Y | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_SUBSTITUTE_BOM_COMPS is not referenced by any database object
A Business Intelligence System view
This shows information about a sequence of non-flow manufacturing
operations that are performed to manufacture an assembly.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NAME | CHAR | (15) | ||
| ROUTING_PRIORITY | NUMBER | |||
| COMMENT | VARCHAR2 | (240) | ||
| _LA:ENGINEERING_ROUTING_FLAG | CHAR | (50) | ||
| _LA:CAPABLE_TO_PROMISE_FLAG | CHAR | (46) | ||
| COMMON_ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| _KF:COMMON_ROUTING_NAME | CHAR | (16) | ||
| _KF:COMPLETION_LOCATOR_CODE | CHAR | (15) | ||
| PROJECT_NAME | VARCHAR2 | (30) | ||
| TASK_NAME | VARCHAR2 | (20) | ||
| _DF | CHAR | (35) | ||
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| PROJECT_ID | NUMBER | |||
| TASK_ID | NUMBER | |||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | |||
| ASSEMBLY_ITEM_ID | NUMBER | Y | ||
| COMMON_ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| COMPLETION_SUBINVENTORY | VARCHAR2 | (10) | ||
| COMPLETION_LOCATOR_ID | NUMBER | |||
| CREATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.BOMFV_WORK_ORDER_ROUTINGS is not referenced by any database object
A Business Intelligence System view
This shows information about routing operations which are not
events, processes or line operations for flow manufacturing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_NUMBER | NUMBER | Y | ||
| START_EFFECTIVE_DATE | DATE | Y | ||
| ALTERNATE_ROUTING_CODE | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ROUTING_ITEM_NAME | CHAR | (15) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | |||
| END_EFFECTIVE_DATE | DATE | |||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | |||
| OPERATION_YIELD | NUMBER | |||
| _LA:COUNT_POINT_TYPE | CHAR | (64) | ||
| _LA:BACKFLUSH_FLAG | CHAR | (52) | ||
| _LA:OPTION_DEPENDENT_FLAG | CHAR | (59) | ||
| _LA:REFERENCE_FLAG | CHAR | (52) | ||
| OPERATION_CODE | VARCHAR2 | (4) | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | |
| ROUTING_SEQUENCE_ID | NUMBER | Y | ||
| OPERATION_SEQUENCE_ID | NUMBER | Y | ||
| STANDARD_OPERATION_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | Y | ||
| UPDATED_ON | DATE | Y | ||
| UPDATED_BY | NUMBER | Y | ||
| CREATED_ON | DATE | Y | ||
| CREATED_BY | NUMBER | Y |
APPS.BOMFV_WORK_ORDER_RTG_OPRATNS is not referenced by any database object
MultiLingual view (a language resolved view of the data.)
This is a view over alternate designator code base table and translation table
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unique identifier | |
| ALTERNATE_DESIGNATOR_CODE | VARCHAR2 | (10) | Alter designator code | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LANGUAGE | VARCHAR2 | (4) | Y | Language |
| SOURCE_LANG | VARCHAR2 | (4) | Y | Base language |
| DISPLAY_NAME | VARCHAR2 | (80) | Y | Display name |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DISABLE_DATE | DATE | Date disabled | ||
| STRUCTURE_TYPE_ID | NUMBER | Structure type identifier | ||
| LAST_UPDATE_DATE | DATE | Y | Standard WHO column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| REQUEST_ID | NUMBER | Concurrent WHO column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent WHO column | ||
| PROGRAM_ID | NUMBER | Concurrent WHO column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent WHO column | ||
| IS_PREFERRED | VARCHAR2 | (1) | IS_PREFERRED Flag |
A public view which may be useful for custom reporting or other data requirements.
View based on BOM_ALTERNATE_DESIGNATORS table. Main columns are
ALTERNATE_DESIGNATOR_CODE, DESCRIPTION, DISABLE_DATE, and
ORGANIZATION_ID. No records are filtered out.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_DESIGNATOR_CODE | VARCHAR2 | (10) | Alternate designator code | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DISABLE_DATE | DATE | Disable date | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who database | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
APPS.BOM_ALT_DESIGNATORS_ALL_V is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
View based on BOM_ALTERNATE_DESIGNATORS table. Main columns are
ALTERNATE_DESIGNATOR_CODE, DESCRIPTION, DISABLE_DATE, and
ORGANIZATION_ID. Disabled records are filtered out.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ALTERNATE_DESIGNATOR_CODE | VARCHAR2 | (10) | Alternate designator code | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DISABLE_DATE | DATE | Disable date | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| STRUCTURE_TYPE_ID | NUMBER | Structure Type Id | ||
| ENABLE_UNIMPLEMENTED_BOMS | VARCHAR2 | (1) | Enable Unimplemented Boms |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ATTR_GROUP_NAME | VARCHAR2 | (30) | Y | Attribute group name |
| ATTR_GROUP_DISP_NAME | VARCHAR2 | (80) | Y | Attribute group display name |
| ATTR_NAME | VARCHAR2 | (30) | Y | Attribute name |
| ATTR_DISPLAY_NAME | VARCHAR2 | (80) | Y | Attribute display name |
| DATABASE_COLUMN | VARCHAR2 | (30) | Y | Extensible attribute column |
| EXT_TABLE_NAME | VARCHAR2 | (30) | Y | Extensible table name |
| INTF_TABLE_NAME | VARCHAR2 | (29) | Interface table name | |
| ATTR_GROUP_ID | NUMBER | (10) | Y | Attribute group identifier |
| ATTR_GROUP_TYPE | VARCHAR2 | (40) | Y | Attribute group type |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of manufactured assembly | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| COMMON_BILL_SEQUENCE_ID | NUMBER | Y | Identifier of common bill | |
| ASSEMBLY_TYPE | NUMBER | Y | 1=Manufacturing bill 2=Engineering bill | |
| DESCRIPTION | VARCHAR2 | (240) | Description |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| REVISION | VARCHAR2 | (3) | Y | Item revision code |
| EFFECTIVITY_DATE | DATE | Y | Revision effectivity date | |
| IMPLEMENTATION_DATE | DATE | ECO implementation date | ||
| HIGH_DATE | DATE | Last minute before the next higher revision is effective | ||
| IMPLEMENTED_FLAG | NUMBER | Implemented (Yes or No) |
A public view which may be useful for custom reporting or other data requirements.
BOM_BILL_OF_MATERIALS stores information of BOM_STRUCTURES_B which further stores information about manufacturing and engineering bills of material. Each row in this table represents a unique manufacturing or engineering bill and is identified by
BILL_SEQUENCE_ID.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of manufactured assembly | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | Assembly item identifier of common bill | ||
| SPECIFIC_ASSEMBLY_COMMENT | VARCHAR2 | (240) | Specific bill of material comment | |
| PENDING_FROM_ECN | VARCHAR2 | (10) | Change notice that created this bill of material | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ASSEMBLY_TYPE | NUMBER | Y | Assembly type: 1=Manufacturing bill 2=Engineering bill | |
| COMMON_BILL_SEQUENCE_ID | NUMBER | Y | Identifier of common bill | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| COMMON_ORGANIZATION_ID | NUMBER | Organization identifier of common bill | ||
| NEXT_EXPLODE_DATE | DATE | Next date when pre-explosion will be refreshed | ||
| PROJECT_ID | NUMBER | Project Identifier for Project Manufacturing | ||
| TASK_ID | NUMBER | Task identifier for Project Manufacturing | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from. | |
| STRUCTURE_TYPE_ID | NUMBER | Structure Type Id | ||
| IMPLEMENTATION_DATE | DATE | Implementation date | ||
| OBJ_NAME | VARCHAR2 | (30) | Object Name | |
| PK1_VALUE | VARCHAR2 | (240) | Pk1 Value | |
| PK2_VALUE | VARCHAR2 | (240) | Pk2 Value | |
| PK3_VALUE | VARCHAR2 | (240) | Pk3 Value | |
| PK4_VALUE | VARCHAR2 | (240) | Pk4 Value | |
| PK5_VALUE | VARCHAR2 | (240) | Pk5 Value | |
| EFFECTIVITY_CONTROL | NUMBER | Effectivity control | ||
| IS_PREFERRED | VARCHAR2 | (1) | Is preferred | |
| SOURCE_BILL_SEQUENCE_ID | NUMBER | Source Bill Sequence Id |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row identifier | |
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of manufactured assembly | ||
| UOM | VARCHAR2 | (3) | Unit of measure | |
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | Pick components flag |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | Y | Replenish to order |
| BOM_ITEM_TYPE | NUMBER | Y | BOM item type | |
| BASE_ITEM_ID | NUMBER | Base item identifier | ||
| ASSEMBLY_ITEM_NO | VARCHAR2 | (40) | Item number of manufactured assembly | |
| ASSEMBLY_ITEM_DESCRIPTION | VARCHAR2 | (240) | Item description of manufactured assembly | |
| ASSEMBLY_ITEM_REVISION | VARCHAR2 | (3) | Item revision of manufactured assembly | |
| ITEM_CATALOG_GROUP_ID | NUMBER | Item catalog group identifier | ||
| ITEM_CATALOG_GROUP | VARCHAR2 | (4000) | Item catalog group | |
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | ATP component flag |
| WIP_SUPPLY_TYPE | NUMBER | Work in process supply type | ||
| ENG_ITEM_FLAG | VARCHAR2 | (1) | Y | Engineering item flag |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | Organization name |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate BOM designator | |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO column | |
| CREATION_DATE | DATE | Y | Standard WHO column | |
| CREATED_BY | NUMBER | Y | Standard WHO column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO column | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | Assembly item identifier of common bill | ||
| COMMON_ASSEMBLY_ITEM_NO | VARCHAR2 | (40) | Assembly item number of common bill | |
| COMMON_ASSEMBLY_DESCRIPTION | VARCHAR2 | (240) | Assembly item description of common bill | |
| SPECIFIC_ASSEMBLY_COMMENT | VARCHAR2 | (240) | Comment on specific assembly | |
| PENDING_FROM_ECN | VARCHAR2 | (10) | Pending from ECN | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ASSEMBLY_TYPE | NUMBER | Y | Assembly type | |
| COMMON_BILL_SEQUENCE_ID | NUMBER | Y | Sequence id for common bill | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill sequence id | |
| REQUEST_ID | NUMBER | Concurrent WHO column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent WHO column | ||
| PROGRAM_ID | NUMBER | Concurrent WHO column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent WHO column | ||
| COMMON_ORGANIZATION_ID | NUMBER | Organization identifier for common bill | ||
| COMMON_ORGANIZATION_CODE | VARCHAR2 | (3) | organization code for common bill | |
| COMMON_ORGANIZATION_NAME | VARCHAR2 | (240) | Organization name for common bill | |
| NEXT_EXPLODE_DATE | DATE | Next bill explosion date | ||
| ITEM_TYPE | VARCHAR2 | (80) | Item type | |
| BOM_ENABLED_FLAG | VARCHAR2 | (1) | Y | BOM enabled flag |
| EAM_ITEM_TYPE | NUMBER | EAM item type | ||
| EAM_ITEM_TYPE_VALUE | VARCHAR2 | (80) | EAM item type value |
APPS.BOM_BILL_OF_MATERIALS_ERV is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unique identifier | |
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of manufactured assembly | ||
| UOM | VARCHAR2 | (3) | Primary unit of measure code | |
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | Flag indicating all shippable components of should be picked |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | Y | Assemble to Order flag |
| BOM_ITEM_TYPE | NUMBER | Y | Type of item | |
| BASE_ITEM_ID | NUMBER | Base item identifier | ||
| DESCRIPTION | VARCHAR2 | (240) | Item description | |
| ITEM_CATALOG_GROUP_ID | NUMBER | Item catalog group identifier | ||
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | Flag indicating whether item may have components requiring ATP check |
| WIP_SUPPLY_TYPE | NUMBER | Source of WIP material supply | ||
| ENG_ITEM_FLAG | VARCHAR2 | (1) | Y | Flag indicating engineering item |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | Assembly item identifier of common bill | ||
| SPECIFIC_ASSEMBLY_COMMENT | VARCHAR2 | (240) | Specific bill of material comment | |
| PENDING_FROM_ECN | VARCHAR2 | (10) | Change notice that created this bill of material | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ASSEMBLY_TYPE | NUMBER | Y | 1=Manufacturing bill 2=Engineering bill | |
| COMMON_BILL_SEQUENCE_ID | NUMBER | Y | Identifier of common bill | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| COMMON_ORGANIZATION_ID | NUMBER | Organization identifier of common bill | ||
| NEXT_EXPLODE_DATE | DATE | Next date when pre-explosion will be refreshed | ||
| ITEM_TYPE | VARCHAR2 | (80) | QuickCode meaning | |
| BOM_ENABLED_FLAG | VARCHAR2 | (1) | Y | Flag indicating item may appear on a BOM |
| EAM_ITEM_TYPE | NUMBER | |||
| EAM_ITEM_TYPE_VALUE | VARCHAR2 | (80) | ||
| STRUCTURE_TYPE_ID | NUMBER | Structure Type Id | ||
| IMPLEMENTATION_DATE | DATE | Implementation Date | ||
| ENABLE_UNIMPLEMENTED_BOMS | VARCHAR2 | (1) | Enable Unimplemented Boms | |
| EFFECTIVITY_CONTROL | NUMBER | |||
| SOURCE_BILL_SEQUENCE_ID | NUMBER | Source Bill Sequence Id |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| ASSEMBLY_TYPE | NUMBER | Y | 1=Manufacturing bill 2=Engineering bill | |
| ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of manufactured assembly | ||
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| ITEM_NUMBER | VARCHAR2 | (40) | Item number | |
| BOM_ENABLED_FLAG | VARCHAR2 | (1) | Y | Flag indicating item may appear on a BOM |
| BOM_ITEM_TYPE | NUMBER | Y | Type of item |
APPS.BOM_BILL_OF_MTLS_QF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| REVISION | VARCHAR2 | (3) | Y | Item revision code |
| EFFECTIVITY_DATE | DATE | Y | Revision effectivity date | |
| IMPLEMENTATION_DATE | DATE | ECO implementation date | ||
| HIGH_DATE | DATE | Last minute before next higher revision becomes effective | ||
| IMPLEMENTED_FLAG | NUMBER | Implemented (Yes or No) |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| MODEL_ID | NUMBER | (18) | Model Id | |
| ATTRIBUTENAME | VARCHAR2 | (255) | Y | Attribute Name |
| ATTRIBUTENAMEID | NUMBER | (18) | Y | Atribute Name Id |
| OBJECTID | NUMBER | (18) | Y | Object Id |
| COMPONENTID | NUMBER | (18) | Y | Component identifier |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill sequence identifier | |
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component sequence identifier | |
| ATTRIBUTEVALUE | VARCHAR2 | (255) | Attribute value |
APPS.BOM_CAD_COMPONENT_ATTR_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| QUARTERLY_CALENDAR_TYPE | NUMBER | Y | Quarterly calendar type code | |
| DAYS_ON | NUMBER | Number of workdays | ||
| DAYS_OFF | NUMBER | Number of non-workdays | ||
| CALENDAR_START_DATE | DATE | Y | Beginning date for the calendar | |
| CALENDAR_END_DATE | DATE | Y | Ending date for the calendar | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
APPS.BOM_CALENDARS_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| EXCEPTION_SET_ID | NUMBER | Y | Exception set unique identifier | |
| YEAR | NUMBER | Calendar year | ||
| MONTH_NUM | NUMBER | Calendar month number | ||
| MONTH | VARCHAR2 | (9) | Calendar Month | |
| FIRST_DAY | DATE | First day of month |
APPS.BOM_CALENDAR_MONTHS_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| EXCEPTION_SET_ID | NUMBER | Y | Exception set unique identifier | |
| YEAR | NUMBER | Calendar year | ||
| MONTH | VARCHAR2 | (3) | Calendar month | |
| MONTH_NUM | NUMBER | Calendar month number | ||
| WEEK | NUMBER | Calendar week | ||
| SUN | NUMBER | Sunday | ||
| SUN_ON | VARCHAR2 | (1) | Exception type | |
| MON | NUMBER | Monday | ||
| MON_ON | VARCHAR2 | (1) | Exception type | |
| TUE | NUMBER | Tuesday | ||
| TUE_ON | VARCHAR2 | (1) | Exception Type | |
| WED | NUMBER | Wednusday | ||
| WED_ON | VARCHAR2 | (1) | Exception type | |
| THU | NUMBER | Thursday | ||
| THU_ON | VARCHAR2 | (1) | Exception Type | |
| FRI | NUMBER | Friday | ||
| FRI_ON | VARCHAR2 | (1) | Exception type | |
| SAT | NUMBER | Saturday | ||
| SAT_ON | VARCHAR2 | (1) | Exception type |
APPS.BOM_CALENDAR_WEEKS_VIEW is not referenced by any database object
MultiLingual view (a language resolved view of the data.)
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EXTENSION_ID | NUMBER | Y | Entension id | |
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component sequence id | |
| BILL_SEQUENCE_ID | NUMBER | Bill sequence id | ||
| STRUCTURE_TYPE_ID | NUMBER | Y | Structure type id | |
| ATTR_GROUP_ID | NUMBER | Y | Attribute group id | |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard WHO column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Standard WHO column | |
| CREATED_BY | NUMBER | (15) | Y | Standard WHO column |
| CREATION_DATE | DATE | Y | Standard WHO column | |
| SOURCE_LANG | VARCHAR2 | (30) | Y | Base language |
| LANGUAGE | VARCHAR2 | (30) | Y | Language |
| C_EXT_ATTR1 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR2 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR3 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR4 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR5 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR6 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR7 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR8 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR9 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR10 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR11 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR12 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR13 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR14 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR15 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR16 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR17 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR18 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR19 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR20 | VARCHAR2 | (150) | Character attribute | |
| N_EXT_ATTR1 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR1 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR2 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR2 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR3 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR3 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR4 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR4 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR5 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR5 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR6 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR6 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR7 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR7 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR8 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR8 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR9 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR9 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR10 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR10 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| D_EXT_ATTR1 | DATE | Date attribute | ||
| D_EXT_ATTR2 | DATE | Date attribute | ||
| D_EXT_ATTR3 | DATE | Date attribute | ||
| D_EXT_ATTR4 | DATE | Date attribute | ||
| D_EXT_ATTR5 | DATE | Date attribute | ||
| C_EXT_ATTR21 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR22 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR23 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR24 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR25 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR26 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR27 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR28 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR29 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR30 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR31 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR32 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR33 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR34 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR35 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR36 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR37 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR38 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR39 | VARCHAR2 | (150) | Character attribute | |
| C_EXT_ATTR40 | VARCHAR2 | (150) | Character attribute | |
| N_EXT_ATTR11 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR11 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR12 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR12 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR13 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR13 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR14 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR14 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR15 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR15 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR16 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR16 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR17 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR17 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR18 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR18 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR19 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR19 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| N_EXT_ATTR20 | NUMBER | Numeric attribute | ||
| UOM_EXT_ATTR20 | VARCHAR2 | (3) | Unit of measure for corresponding numeric attribute | |
| D_EXT_ATTR6 | DATE | Date attribute | ||
| D_EXT_ATTR7 | DATE | Date attribute | ||
| D_EXT_ATTR8 | DATE | Date attribute | ||
| D_EXT_ATTR9 | DATE | Date attribute | ||
| D_EXT_ATTR10 | DATE | Date attribute | ||
| TL_EXT_ATTR1 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR2 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR3 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR4 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR5 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR6 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR7 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR8 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR9 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR10 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR11 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR12 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR13 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR14 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR15 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR16 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR17 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR18 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR19 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR20 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR21 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR22 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR23 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR24 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR25 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR26 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR27 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR28 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR29 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR30 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR31 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR32 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR33 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR34 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR35 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR36 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR37 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR38 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR39 | VARCHAR2 | (1000) | Translated character attribute | |
| TL_EXT_ATTR40 | VARCHAR2 | (1000) | Translated character attribute |
APPS.BOM_COMPONENTS_EXT_VL is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
BOM_COMPONENTS_OCV stores information to display bom structure type.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CODE | NUMBER | Y | Structure Type Unique Identifier | |
| MEANING | VARCHAR2 | (30) | Y | Structure Type Name |
| LANGUAGE | VARCHAR2 | (4) | Y | The language code of the language which the translatable fields are translated to |
APPS.BOM_COMPONENTS_OCV is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| BILL_SEQUENCE_ID | NUMBER | |||
| COMPONENT_SEQUENCE_ID | NUMBER | |||
| COMPONENT_ITEM_ID | NUMBER | |||
| OPERATION_SEQ_NUM | NUMBER | |||
| EFFECTIVITY_DATE | DATE | |||
| DISABLE_DATE | DATE | |||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| IMPLEMENTATION_DATE | DATE | |||
| ECO_FOR_PRODUCTION | NUMBER | |||
| COMP_OPERATION_SEQ_ID | NUMBER | |||
| ROW_ID | ROWID | (10) | ||
| ENTITY_IDENTIFIER | CHAR | (9) |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | ||
| COMP_OPERATION_SEQ_ID | NUMBER | Y | ||
| OPERATION_SEQ_NUM | NUMBER | Y | ||
| OPERATION_SEQUENCE_ID | NUMBER | Y | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_LOGIN | NUMBER | |||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | ||
| BILL_SEQUENCE_ID | NUMBER | Y | ||
| CONSUMING_OPERATION_FLAG | VARCHAR2 | (1) | ||
| CONSUMPTION_QUANTITY | NUMBER | |||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | ||
| SUPPLY_LOCATOR_ID | NUMBER | |||
| WIP_SUPPLY_TYPE | NUMBER | |||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ATTRIBUTE15 | VARCHAR2 | (150) | ||
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common Component Sequence Id |
APPS.BOM_COMPONENT_OPERATIONS_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| GROUP_ID | NUMBER | Explosion unique identifier | ||
| TOP_BILL_SEQUENCE_ID | NUMBER | Y | Bill identifier for level 0 item | |
| TOP_ITEM_ID | NUMBER | Identifier for level 0 item | ||
| BILL_SEQUENCE_ID | NUMBER | Bill of material unique identifier | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| SORT_ORDER | VARCHAR2 | (2000) | Sort sequence | |
| EXTENDED_QUANTITY | NUMBER | Total quantity of component used in bill | ||
| ITEM_COST | NUMBER | Item unit cost | ||
| WIP_SUPPLY_TYPE | NUMBER | Supply Type | ||
| INCLUDE_IN_ROLLUP_FLAG | NUMBER | Flag to indicate if the component is to be included in cost rollup | ||
| BASED_ON_ROLLUP_FLAG | NUMBER | Flag to indicate if item costs are based on rollup | ||
| ACTUAL_COST_TYPE_ID | NUMBER | Actual cost type | ||
| SHRINKAGE_RATE | NUMBER | Item shrinkage rate | ||
| INVENTORY_ASSET_FLAG | NUMBER | Flag indicating item is an inventory asset | ||
| PLAN_LEVEL | NUMBER | Level in bill of material | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| COMPONENT_YIELD_FACTOR | NUMBER | Factor to multiply component quantity to compute component yield | ||
| COMPONENT_QUANTITY | NUMBER | Quantity of component used in bill | ||
| EXTEND_COST_FLAG | NUMBER | Flag to indicate if the item cost is to be extended |
APPS.BOM_CONSOLIDATE_EXPLOSION_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TOP_BILL_SEQUENCE_ID | NUMBER | Y | Top Bill Sequence Id of the Exploded Structure | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill Sequence Id of the structure | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| EXPLOSION_TYPE | VARCHAR2 | (20) | Explosion type | |
| COMPONENT_SEQUENCE_ID | NUMBER | Sequence id of the component | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| PLAN_LEVEL | NUMBER | Y | Level in bill | |
| SORT_ORDER | VARCHAR2 | (2000) | Y | Sorting sequence of the explosion |
| TOP_ITEM_ID | NUMBER | Item id of evel 0 item | ||
| COMPONENT_QUANTITY | NUMBER | Component quantity | ||
| BOM_ITEM_TYPE | NUMBER | Type of item | ||
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | indicating if the shippable items should bep icked | |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | Assemble to order flag | |
| ASSEMBLY_ITEM_ID | NUMBER | Assembled item id | ||
| COMPONENT_CODE | VARCHAR2 | (4000) | Component code | |
| LOOP_FLAG | NUMBER | Indicates whether a loop is detected | ||
| PARENT_BOM_ITEM_TYPE | NUMBER | Parent Item's BOM item type | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| DISABLE_DATE | DATE | Disable date | ||
| IMPLEMENTATION_DATE | DATE | Implementation date | ||
| COMMON_BILL_SEQUENCE_ID | NUMBER | Common Bill's unique identifier of parent | ||
| COMP_BILL_SEQ_ID | NUMBER | Component bill's unique identifier | ||
| COMP_COMMON_BILL_SEQ_ID | NUMBER | Component's common Bill's unique identifier | ||
| EXPLODE_GROUP_ID | NUMBER | not used | ||
| ITEM_NAME | VARCHAR2 | (40) | Item name | |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (4000) | Alternate BOM designator | |
| CURRENT_ITEM_REVISION | VARCHAR2 | (4000) | Current revision of the item | |
| REVISION_LABEL | VARCHAR2 | (4000) | Revision label of the item | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineerin change notice | |
| CHANGE_ID | NUMBER | Change identifier | ||
| ENG_ITEM_FLAG | VARCHAR2 | (1) | Flag indicating if the item is a change item | |
| PARENT_SORT_ORDER | VARCHAR2 | (2000) | Sort order of the Parent | |
| REVISION_CODE | VARCHAR2 | (4000) | Revision code | |
| STRUCTURE_TYPE_ID | NUMBER | Structure type identifier | ||
| PK1_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK2_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK3_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK4_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK5_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| OBJ_NAME | VARCHAR2 | (30) | Object name | |
| REVISION_ID | NUMBER | Revision identifier | ||
| FROM_MINOR_REVISION_ID | NUMBER | From minor revision id | ||
| TO_MINOR_REVISION_ID | NUMBER | To minor revision id | ||
| FROM_END_ITEM_REV_ID | NUMBER | From end item revision id | ||
| TO_END_ITEM_REV_ID | NUMBER | To end item revision id | ||
| FROM_END_ITEM_MINOR_REV_ID | NUMBER | From end item minor revision id | ||
| TO_END_ITEM_MINOR_REV_ID | NUMBER | To end item minor revision id | ||
| EFFECTIVITY_CONTROL | NUMBER | Effectivity control | ||
| ACCESS_FLAG | VARCHAR2 | (4000) | Access flag | |
| BOM_IMPLEMENTATION_DATE | DATE | BOM Implementation date | ||
| MINOR_REVISION | NUMBER | Minor revision | ||
| ASSEMBLY_TYPE | NUMBER | Assembly type | ||
| ACD_TYPE | NUMBER | ACD type | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | From end item unit number | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | To end item unit number | |
| CHANGE_POLICY_VALUE | VARCHAR2 | (240) | Change policy value | |
| IS_EXCLUDED_BY_RULE | VARCHAR2 | (4000) | BOM explosion excluded by rule | |
| GROUP_ID | NUMBER | Group id | ||
| PARENT_IMPLEMENTATION_DATE | DATE | Parent implementation date | ||
| PARENT_CHANGE_NOTICE | VARCHAR2 | (10) | Parent change notice | |
| COMP_FIXED_REV_CODE | VARCHAR2 | (4000) | Component fixed revision code | |
| SOURCE_BILL_SEQUENCE_ID | NUMBER | Source bill sequence id | ||
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common component sequence id | ||
| COMP_SOURCE_BILL_SEQ_ID | NUMBER | Component source bill sequence id | ||
| CATALOG_CATEGORY_ID | NUMBER | Catalog category id | ||
| COMMON_ORGANIZATION_ID | NUMBER | Organization id of common bill | ||
| ITEM_STATUS | VARCHAR2 | (10) | Y | Item status |
| CREATION_DATE | DATE | Standard WHO column | ||
| CREATED_BY | NUMBER | Standard WHO column | ||
| LAST_UPDATE_DATE | DATE | Standard WHO column | ||
| LAST_UPDATED_BY | NUMBER | Standard WHO column |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LINE_ID | NUMBER | (10) | Y | LINE ID |
| TOP_MODEL_LINE_ID | NUMBER | (10) | Y | TOP_MODEL_LINE_ID |
| REFERENCE_ID | NUMBER | |||
| GROUP_REFERENCE_ID | NUMBER | |||
| CREATE_BOM | VARCHAR2 | (1) | Create Bom | |
| COST_ROLLUP | VARCHAR2 | (1) | Cost Rollup | |
| CONFIG_ITEM_ID | NUMBER | CONFIG ITEM ID | ||
| CREATE_SRC_RULES | VARCHAR2 | (1) | Create Src Rules | |
| MODEL_ITEM_ID | NUMBER | Model Item Id | ||
| ORGANIZATION_ID | NUMBER | Organization Id | ||
| ORGANIZATION_TYPE | NUMBER | Organization Type | ||
| RANK | NUMBER | Rank | ||
| RCV_ORG_ID | NUMBER | Rcv Org Id | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| LAST_UPDATE_DATE | DATE | Standard Who column |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unique identifier | |
| DELETE_ENTITY_SEQUENCE_ID | NUMBER | Y | Delete entity unique identifier | |
| DELETE_GROUP_SEQUENCE_ID | NUMBER | Y | Delete group unique identifier | |
| DELETE_ENTITY_TYPE | NUMBER | Type of delete entity | ||
| DELETE_ENTITY | VARCHAR2 | (80) | Type of entity to be deleted | |
| BILL_SEQUENCE_ID | NUMBER | Bill of material unique identifier | ||
| ROUTING_SEQUENCE_ID | NUMBER | Routing unique identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Item unique identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate designator of bom or routing being deleted | |
| ITEM_DESCRIPTION | VARCHAR2 | (240) | Item description | |
| ITEM_CONCAT_SEGMENTS | VARCHAR2 | (240) | Y | Item concatenated key flexfield segments |
| DELETE_STATUS_TYPE | NUMBER | Delete entity status | ||
| DELETE_STATUS | VARCHAR2 | (80) | Status of delete | |
| DELETE_DATE | DATE | Date entity was deleted | ||
| PRIOR_PROCESS_FLAG | NUMBER | Y | Indicates whether this row has been exploded into its bill or routings for child organizations | |
| PRIOR_COMMIT_FLAG | NUMBER | Y | Indicates if the row is user entered or loaded automatically | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code |
APPS.BOM_DELETE_ENTITIES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unique identifier | |
| DELETE_ENTITY_SEQUENCE_ID | NUMBER | Y | Delete entity unique identifier | |
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| OPERATION_SEQUENCE_ID | NUMBER | Routing operation unique identifier | ||
| ERROR_SEQUENCE_NUMBER | NUMBER | Y | Error sequence number | |
| SQL_STATEMENT_NAME | VARCHAR2 | (10) | Y | Name of failed sql statement |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| MESSAGE_NAME | VARCHAR2 | (30) | Name of the message to be produced when the sql statement fails |
APPS.BOM_DELETE_ERRORS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unique identifier | |
| DELETE_ENTITY_SEQUENCE_ID | NUMBER | Delete entity unique identifier | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| OPERATION_SEQUENCE_ID | NUMBER | Routing operation unique identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| COMPONENT_CONCAT_SEGMENTS | VARCHAR2 | (240) | Component item concatenated key flexfield segments | |
| ITEM_NUM | NUMBER | Sequence number of the component within the bill | ||
| DISABLE_DATE | DATE | Disable date | ||
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| OPERATION_DEPARTMENT_CODE | VARCHAR2 | (10) | Department in which the operation takes place | |
| DELETE_STATUS_TYPE | NUMBER | Delete status | ||
| DELETE_STATUS | VARCHAR2 | (80) | Y | Status of delete |
| DELETE_DATE | DATE | Date the sub-entity was deleted | ||
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | From End Item Unit Number | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | To End Item Unit Number |
APPS.BOM_DELETE_SUB_ENTITIES_V is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
View based on BOM_DEPARTMENTS table. Main columns include
DEPARTMENT_ID, DEPARTMENT_CODE, DESCRIPTION, DISABLE_DATE,
ORGANIZATION_ID. No records are filtered out.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | Department code |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DISABLE_DATE | DATE | Disable date | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| DEPARTMENT_CLASS_CODE | VARCHAR2 | (10) | Department class code | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| LOCATION_ID | NUMBER | Location unique identifier |
APPS.BOM_DEPARTMENTS_ALL_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | - Record unique identifier | |
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | Department code |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DISABLE_DATE | DATE | Disable date | ||
| DEPARTMENT_CLASS_CODE | VARCHAR2 | (10) | Department class code | |
| CLASS_DESCRIPTION | VARCHAR2 | (240) | Description | |
| LOCATION_ID | NUMBER | Location identifier | ||
| LOCATION_CODE | VARCHAR2 | (60) | Location name | |
| LOCATION_DESCRIPTION | VARCHAR2 | (240) | Brief description of the location | |
| PA_EXPENDITURE_ORG_ID | NUMBER | Expenditure organization identifier | ||
| PA_EXPENDITURE_ORG_NAME | VARCHAR2 | (240) | Expenditure organization name | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| SCRAP_ACCOUNT | NUMBER | Scrap account of department | ||
| EST_ABSORPTION_ACCOUNT | NUMBER | Estimated scrap absorption account | ||
| MAINT_COST_CATEGORY | VARCHAR2 | (30) | ||
| MAINT_COST_CATEGORY_VALUE | VARCHAR2 | (80) |
A public view which may be useful for custom reporting or other data requirements.
View based on BOM_DEPARTMENTS table. Main columns include
DEPARTMENT_ID, DEPARTMENT_CODE, DESCRIPTION, DISABLE_DATE,
ORGANIZATION_ID. Disabled records are filtered out.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | Department code |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DISABLE_DATE | DATE | Disable date | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| DEPARTMENT_CLASS_CODE | VARCHAR2 | (10) | Department class code | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| LOCATION_ID | NUMBER | Location identifier |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row unique identifier | |
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| RESOURCE_CODE | VARCHAR2 | (10) | Y | Resource code |
| RESOURCE_DESCRIPTION | VARCHAR2 | (240) | Description | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| UNIT_OF_MEASURE | VARCHAR2 | (3) | Unit of measure | |
| SHARE_CAPACITY_FLAG | NUMBER | Y | Allow sharing of capacity | |
| SHARE_FROM_DEPT_ID | NUMBER | Share capacity from department identifier | ||
| SHARE_FROM_DEPARTMENT | VARCHAR2 | (10) | Department code | |
| DEPARTMENT_DESCRIPTION | VARCHAR2 | (240) | Description | |
| CAPACITY_UNITS | NUMBER | Resource capacity | ||
| RESOURCE_GROUP_NAME | VARCHAR2 | (30) | Resource use category | |
| AVAILABLE_24_HOURS_FLAG | NUMBER | Y | Resource is available 24 hours or by shifts | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | ||
| DEPARTMENT_DISABLE_DATE | DATE | |||
| RESOURCE_DISABLE_DATE | DATE | |||
| ORGANIZATION_ID | NUMBER | Y | ||
| EXCEPTION_SET_NAME | VARCHAR2 | (10) | ||
| CTP_FLAG | NUMBER | |||
| ATP_RULE_ID | NUMBER | |||
| ATP_RULE_NAME | VARCHAR2 | (80) | ||
| UTILIZATION | NUMBER | Resource Utilization | ||
| EFFICIENCY | NUMBER | Resource Efficiency | ||
| SCHEDULE_TO_INSTANCE | NUMBER | |||
| SEQUENCING_WINDOW | NUMBER | Sequencing Window | ||
| IDLE_TIME_TOLERANCE | NUMBER | Idle Time Tolerance |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unique identifier | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| ELEMENT_NAME | VARCHAR2 | (30) | Y | Descriptive element name |
| DESCRIPTION | VARCHAR2 | (50) | Descriptive element description | |
| LAST_UPDATE_DATE | DATE | Y | Last update date | |
| LAST_UPDATED_BY | NUMBER | Y | Last updated by | |
| CREATION_DATE | DATE | Y | Creation date | |
| CREATED_BY | NUMBER | Y | Created by | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Last update login |
APPS.BOM_DEPENDENT_DESC_ELEMENTS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row unique identifier | |
| INSTANCE_ID | NUMBER | Y | Instance Id | |
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | ||
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| EMPLOYEE_NUMBER | VARCHAR2 | (30) | Employee Number | |
| FULL_NAME | VARCHAR2 | (240) | Full Name | |
| EFFECTIVE_START_DATE | DATE | Y | Effective Start Date | |
| EFFECTIVE_END_DATE | DATE | Y | Effective End Date |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row unique identifier | |
| INSTANCE_ID | NUMBER | Y | Instance Id | |
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | ||
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| EQUIPMENT | VARCHAR2 | (40) | Employee Number | |
| DESCRIPTION | VARCHAR2 | (240) | Full Name |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPT_ID | NUMBER | Y | Department identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who columns | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who columns | |
| CREATION_DATE | DATE | Y | Standard Who columns | |
| CREATED_BY | NUMBER | Y | Standard Who columns | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who columns | ||
| RESPONSIBILITY_ID | NUMBER | Y | Responsibility identifier of responsibility associated with department | |
| RESPONSIBILITY_APPLICATION_ID | NUMBER | Y | Resposibility application identifier | |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | Department code to which a responsibility is associated |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ROW_ID | ROWID | (10) | Row identifier (for internal use only) | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| PRIMARY_APPROVER_ID | NUMBER | |||
| PRIMARY_APPROVER_NAME | VARCHAR2 | (100) |
APPS.BOM_EAM_DEPT_APPROVERS_VL is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TOP_BILL_SEQUENCE_ID | NUMBER | Y | Top Bill Sequence Id of Explosion | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill Sequence Id of the Item | |
| ORGANIZATION_ID | NUMBER | Y | Organization Id of the Item | |
| EXPLOSION_TYPE | VARCHAR2 | (20) | Explosion Type | |
| COMPONENT_SEQUENCE_ID | NUMBER | Coponent Sequence ID | ||
| COMPONENT_ITEM_ID | NUMBER | Component Item Id | ||
| PLAN_LEVEL | NUMBER | Y | Hierarchy Level for Explosion | |
| EXTENDED_QUANTITY | NUMBER | Components Extended Quantity | ||
| SORT_ORDER | VARCHAR2 | (2000) | Y | Sort Order for the Hierarchy |
| CREATION_DATE | DATE | Standard Who Column | ||
| CREATED_BY | NUMBER | Standard Who Column | ||
| LAST_UPDATE_DATE | DATE | Standard Who Column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who Column | ||
| TOP_ITEM_ID | NUMBER | Exploded Top Item Id | ||
| CONTEXT | VARCHAR2 | (30) | CONTEXT | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| COMPONENT_QUANTITY | NUMBER | Quantity of Component in Assembly | ||
| BASIS_TYPE | NUMBER | |||
| SO_BASIS | NUMBER | SO BASIS | ||
| OPTIONAL | NUMBER | Optional Item Flag | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | MUTUALLY_EXCLUSIVE_OPTIONS | ||
| CHECK_ATP | NUMBER | CHECK ATP FLAG | ||
| SHIPPING_ALLOWED | NUMBER | Shipping Allowed Flag | ||
| REQUIRED_TO_SHIP | NUMBER | REQUIRED TO SHIP Flag | ||
| REQUIRED_FOR_REVENUE | NUMBER | REQUIRED_FOR_REVENUE | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | INCLUDE_ON_SHIP_DOCS | ||
| INCLUDE_ON_BILL_DOCS | NUMBER | INCLUDE_ON_BILL_DOCS | ||
| LOW_QUANTITY | NUMBER | LOW QUANTITY | ||
| HIGH_QUANTITY | NUMBER | HIGH_QUANTITY | ||
| PICK_COMPONENTS | NUMBER | PICK_COMPONENTS | ||
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | Unit of Measure Code | |
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (25) | Primary Unit of Measure | |
| BASE_ITEM_ID | NUMBER | BASE_ITEM_ID | ||
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | ATP_COMPONENTS_FLAG | |
| ATP_FLAG | VARCHAR2 | (1) | ATP_FLAG | |
| BOM_ITEM_TYPE | NUMBER | BOM_ITEM_TYPE | ||
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | PICK_COMPONENTS_FLAG | |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | REPLENISH_TO_ORDER_FLAG | |
| SHIPPABLE_ITEM_FLAG | VARCHAR2 | (1) | SHIPPABLE_ITEM_FLAG | |
| CUSTOMER_ORDER_FLAG | VARCHAR2 | (1) | CUSTOMER_ORDER_FLAG | |
| INTERNAL_ORDER_FLAG | VARCHAR2 | (1) | INTERNAL_ORDER_FLAG | |
| CUSTOMER_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | CUSTOMER_ORDER_ENABLED_FLAG | |
| INTERNAL_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | INTERNAL_ORDER_ENABLED_FLAG | |
| SO_TRANSACTIONS_FLAG | VARCHAR2 | (1) | SO_TRANSACTIONS_FLAG | |
| DESCRIPTION | VARCHAR2 | (255) | DESCRIPTION | |
| ASSEMBLY_ITEM_ID | NUMBER | ASSEMBLY_ITEM_ID | ||
| COMPONENT_CODE | VARCHAR2 | (4000) | COMPONENT_CODE | |
| LOOP_FLAG | NUMBER | LOOP_FLAG | ||
| PARENT_BOM_ITEM_TYPE | NUMBER | PARENT_BOM_ITEM_TYPE | ||
| OPERATION_SEQ_NUM | NUMBER | OPERATION_SEQ_NUM | ||
| ITEM_NUM | NUMBER | ITEM_NUM | ||
| EFFECTIVITY_DATE | DATE | EFFECTIVITY_DATE | ||
| DISABLE_DATE | DATE | DISABLE_DATE | ||
| IMPLEMENTATION_DATE | DATE | IMPLEMENTATION_DATE | ||
| REXPLODE_FLAG | NUMBER | REXPLODE_FLAG | ||
| COMMON_BILL_SEQUENCE_ID | NUMBER | COMMON_BILL_SEQUENCE_ID | ||
| COMP_BILL_SEQ_ID | NUMBER | COMP_BILL_SEQ_ID | ||
| COMP_COMMON_BILL_SEQ_ID | NUMBER | COMP_COMMON_BILL_SEQ_ID | ||
| EXPLODE_GROUP_ID | NUMBER | EXPLODE_GROUP_ID | ||
| NUM_COL1 | NUMBER | NUM_COL1 | ||
| NUM_COL2 | NUMBER | NUM_COL2 | ||
| NUM_COL3 | NUMBER | NUM_COL3 | ||
| DATE_COL1 | DATE | DATE_COL1 | ||
| DATE_COL2 | DATE | DATE_COL1 | ||
| DATE_COL3 | DATE | DATE_COL3 | ||
| CHAR_COL1 | VARCHAR2 | (80) | CHAR_COL1 | |
| CHAR_COL2 | VARCHAR2 | (80) | CHAR_COL1 | |
| CHAR_COL3 | VARCHAR2 | (80) | CHAR_COL3 | |
| AUTO_REQUEST_MATERIAL | VARCHAR2 | (1) | AUTO_REQUEST_MATERIAL | |
| ITEM_NAME | VARCHAR2 | (2048) | Concatenated Sengments | |
| ITEM_STATUS | VARCHAR2 | (80) | ITEM_STATUS | |
| IMAGE_SOURCE | CHAR | (20) | Image Source to Show Documents and Components | |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (4000) | Structure Name | |
| CURRENT_ITEM_REVISION | VARCHAR2 | (4000) | CURRENT_ITEM_REVISION | |
| REVISION_LABEL | VARCHAR2 | (4000) | Revision Label | |
| INCLUDE_IN_COST_ROLLUP | NUMBER | INCLUDE_IN_COST_ROLLUP | ||
| COMPONENT_YIELD_FACTOR | NUMBER | COMPONENT_YIELD_FACTOR | ||
| PLANNING_FACTOR | NUMBER | PLANNING_FACTOR | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | CHANGE_NOTICE | |
| STRUCTURE_TYPE | VARCHAR2 | (4000) | Structure Type Display | |
| USER_ITEM_TYPE | CHAR | (8) | USER_ITEM_TYPE | |
| CHANGE_ID | NUMBER | Change Id for the Engineering Change Order | ||
| CATALOG_CATEGORY | VARCHAR2 | (255) | Catalog Category Group | |
| ENG_ITEM_FLAG | VARCHAR2 | (1) | Engineering Item Flag | |
| PARENT_SORT_ORDER | VARCHAR2 | (2000) | Parent Sort Order for Sorting the Components in a Tree Structure | |
| LONG_DESCRIPTION | VARCHAR2 | (4000) | Components Long Description | |
| REVISION_CODE | VARCHAR2 | (4000) | ||
| STRUCTURE_TYPE_ID | NUMBER | Structure Type Identifier | ||
| SUGGESTED_VENDOR_NAME | VARCHAR2 | (240) | Used by direct items in EAM BOMs | |
| VENDOR_ID | NUMBER | Used by direct items in EAM BOMs | ||
| UNIT_PRICE | NUMBER | Unit Price for direct items used by EAM BOMs | ||
| PK1_VALUE | VARCHAR2 | (240) | PK Columns | |
| PK2_VALUE | VARCHAR2 | (240) | PK Columns | |
| PK3_VALUE | VARCHAR2 | (240) | PK Columns | |
| PK4_VALUE | VARCHAR2 | (240) | PK Columns | |
| PK5_VALUE | VARCHAR2 | (240) | PK Columns | |
| OBJ_NAME | VARCHAR2 | (30) | Object Name | |
| HGRID_FLAG | VARCHAR2 | (240) | Filter Flag | |
| CATALOG_CATEGORY_ID | NUMBER | Item Catalog Category ID | ||
| REVISION_ID | NUMBER | |||
| FROM_MINOR_REVISION_ID | NUMBER | |||
| TO_MINOR_REVISION_ID | NUMBER | |||
| FROM_MINOR_REVISION_LABEL | VARCHAR2 | (0) | ||
| TO_MINOR_REVISION_LABEL | VARCHAR2 | (0) | ||
| FROM_END_ITEM_REV_ID | NUMBER | |||
| TO_END_ITEM_REV_ID | NUMBER | |||
| FROM_END_ITEM_REVISION_LABEL | VARCHAR2 | (80) | ||
| TO_END_ITEM_REVISION_LABEL | VARCHAR2 | (80) | ||
| FROM_END_ITEM_MINOR_REV_ID | NUMBER | |||
| TO_END_ITEM_MINOR_REV_ID | NUMBER | |||
| FROM_END_ITEM_MINOR_REV_LABEL | VARCHAR2 | (0) | ||
| TO_END_ITEM_MINOR_REV_LABEL | VARCHAR2 | (0) | ||
| OBJECT_VERSION | NUMBER | |||
| MAPPED_ITEM_NAME | VARCHAR2 | (40) | ||
| MAPPED_ITEM_REVISION | VARCHAR2 | (84) | ||
| MAP_STATUS | NUMBER | |||
| FROM_END_ITEM | VARCHAR2 | (40) | ||
| TO_END_ITEM | VARCHAR2 | (40) | ||
| EFFECTIVITY_CONTROL | NUMBER | |||
| ACCESS_FLAG | VARCHAR2 | (4000) | ||
| TEMPLATE_NAME | VARCHAR2 | (0) | Item Template | |
| BOM_IMPLEMENTATION_DATE | DATE | |||
| MINOR_REVISION | VARCHAR2 | (0) | ||
| ASSEMBLY_TYPE | NUMBER | Assembly Type of the BOM | ||
| GTIN_NUMBER | VARCHAR2 | (25) | ||
| GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (35) | ||
| TOP_GTIN_NUMBER | VARCHAR2 | (25) | ||
| TOP_GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| TOP_TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (35) | ||
| PARENT_GTIN_NUMBER | VARCHAR2 | (25) | ||
| PARENT_GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| PARENT_TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (35) | ||
| QUANTITY_OF_CHILDREN | NUMBER | |||
| TOTAL_QTY_AT_NEXT_LEVEL | NUMBER | |||
| IS_PREFERRED | VARCHAR2 | (1) | ||
| TRADE_ITEM_DESCRIPTOR_DESC | VARCHAR2 | (80) | Trade Item Descriptor Description | |
| GTIN_PUBLICATION_STATUS | VARCHAR2 | (1) | GTIN Publication Status | |
| ATTACHMENT_NAME | VARCHAR2 | (0) | ||
| ACD_TYPE | NUMBER | |||
| QUANTITY_RELATED | NUMBER | |||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| STRUCTURE_DISPLAY_NAME | VARCHAR2 | (4000) | ||
| CHANGE_POLICY_VALUE | VARCHAR2 | (240) | ||
| COMPONENT_REMARKS | VARCHAR2 | (240) | Component Comments | |
| IS_EXCLUDED_BY_RULE | VARCHAR2 | (4000) | Whether the component is excluded by rule or not. | |
| WIP_SUPPLY_TYPE | NUMBER | |||
| LOCATOR | VARCHAR2 | (40) | ||
| GROUP_ID | NUMBER | |||
| PARENT_IMPLEMENTATION_DATE | DATE | |||
| PARENT_CHANGE_NOTICE | VARCHAR2 | (10) | ||
| COMP_FIXED_REV_CODE | VARCHAR2 | (4000) | Holds the value of fixed revision code for Fixed Rev Components. |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TOP_BILL_SEQUENCE_ID | NUMBER | Top Bill Sequence Id of Explosion | ||
| BILL_SEQUENCE_ID | NUMBER | Bill Sequence Id of the Item | ||
| ORGANIZATION_ID | NUMBER | Organization Id of the Item | ||
| EXPLOSION_TYPE | VARCHAR2 | (20) | Explosion Type | |
| COMPONENT_SEQUENCE_ID | NUMBER | Coponent Sequence ID | ||
| COMPONENT_ITEM_ID | NUMBER | Component Item Id | ||
| PLAN_LEVEL | NUMBER | Hierarchy Level for Explosion | ||
| EXTENDED_QUANTITY | NUMBER | Components Extended Quantity | ||
| SORT_ORDER | VARCHAR2 | (2008) | Sort Order for the Hierarchy | |
| CREATION_DATE | DATE | Standard Who Column | ||
| CREATED_BY | NUMBER | Standard Who Column | ||
| LAST_UPDATE_DATE | DATE | Standard Who Column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who Column | ||
| TOP_ITEM_ID | NUMBER | Exploded Top Item Id | ||
| CONTEXT | VARCHAR2 | (30) | CONTEXT | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BASIS_TYPE | NUMBER | |||
| COMPONENT_QUANTITY | NUMBER | Quantity of Component in Assembly | ||
| SO_BASIS | NUMBER | SO BASIS | ||
| OPTIONAL | NUMBER | Optional Item Flag | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | MUTUALLY_EXCLUSIVE_OPTIONS | ||
| CHECK_ATP | NUMBER | CHECK ATP FLAG | ||
| SHIPPING_ALLOWED | NUMBER | Shipping Allowed Flag | ||
| REQUIRED_TO_SHIP | NUMBER | REQUIRED TO SHIP Flag | ||
| REQUIRED_FOR_REVENUE | NUMBER | REQUIRED_FOR_REVENUE | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | INCLUDE_ON_SHIP_DOCS | ||
| INCLUDE_ON_BILL_DOCS | NUMBER | INCLUDE_ON_BILL_DOCS | ||
| LOW_QUANTITY | NUMBER | LOW QUANTITY | ||
| HIGH_QUANTITY | NUMBER | HIGH_QUANTITY | ||
| PICK_COMPONENTS | NUMBER | PICK_COMPONENTS | ||
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | Unit of Measure Code | |
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (50) | Primary Unit of Measure | |
| BASE_ITEM_ID | NUMBER | BASE_ITEM_ID | ||
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | ATP_COMPONENTS_FLAG | |
| ATP_FLAG | VARCHAR2 | (1) | ATP_FLAG | |
| BOM_ITEM_TYPE | NUMBER | BOM_ITEM_TYPE | ||
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | PICK_COMPONENTS_FLAG | |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | REPLENISH_TO_ORDER_FLAG | |
| SHIPPABLE_ITEM_FLAG | VARCHAR2 | (1) | SHIPPABLE_ITEM_FLAG | |
| CUSTOMER_ORDER_FLAG | VARCHAR2 | (1) | CUSTOMER_ORDER_FLAG | |
| INTERNAL_ORDER_FLAG | VARCHAR2 | (1) | INTERNAL_ORDER_FLAG | |
| CUSTOMER_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | CUSTOMER_ORDER_ENABLED_FLAG | |
| INTERNAL_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | INTERNAL_ORDER_ENABLED_FLAG | |
| SO_TRANSACTIONS_FLAG | VARCHAR2 | (1) | SO_TRANSACTIONS_FLAG | |
| DESCRIPTION | VARCHAR2 | (255) | DESCRIPTION | |
| ASSEMBLY_ITEM_ID | NUMBER | ASSEMBLY_ITEM_ID | ||
| COMPONENT_CODE | VARCHAR2 | (4000) | COMPONENT_CODE | |
| LOOP_FLAG | NUMBER | LOOP_FLAG | ||
| PARENT_BOM_ITEM_TYPE | NUMBER | PARENT_BOM_ITEM_TYPE | ||
| OPERATION_SEQ_NUM | NUMBER | OPERATION_SEQ_NUM | ||
| ITEM_NUM | NUMBER | ITEM_NUM | ||
| EFFECTIVITY_DATE | DATE | EFFECTIVITY_DATE | ||
| DISABLE_DATE | DATE | DISABLE_DATE | ||
| IMPLEMENTATION_DATE | DATE | IMPLEMENTATION_DATE | ||
| REXPLODE_FLAG | NUMBER | REXPLODE_FLAG | ||
| COMMON_BILL_SEQUENCE_ID | NUMBER | COMMON_BILL_SEQUENCE_ID | ||
| COMP_BILL_SEQ_ID | NUMBER | COMP_BILL_SEQ_ID | ||
| COMP_COMMON_BILL_SEQ_ID | NUMBER | COMP_COMMON_BILL_SEQ_ID | ||
| EXPLODE_GROUP_ID | NUMBER | EXPLODE_GROUP_ID | ||
| NUM_COL1 | NUMBER | NUM_COL1 | ||
| NUM_COL2 | NUMBER | NUM_COL2 | ||
| NUM_COL3 | NUMBER | NUM_COL3 | ||
| DATE_COL1 | DATE | DATE_COL1 | ||
| DATE_COL2 | DATE | DATE_COL1 | ||
| DATE_COL3 | DATE | DATE_COL3 | ||
| CHAR_COL1 | VARCHAR2 | (80) | CHAR_COL1 | |
| CHAR_COL2 | VARCHAR2 | (80) | CHAR_COL1 | |
| CHAR_COL3 | VARCHAR2 | (80) | CHAR_COL3 | |
| AUTO_REQUEST_MATERIAL | VARCHAR2 | (1) | AUTO_REQUEST_MATERIAL | |
| ITEM_NAME | VARCHAR2 | (2048) | Concatenated Sengments | |
| ITEM_STATUS | VARCHAR2 | (80) | ITEM_STATUS | |
| IMAGE_SOURCE | VARCHAR2 | (20) | Image Source to Show Documents and Components | |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (4000) | Structure Name | |
| CURRENT_ITEM_REVISION | VARCHAR2 | (4000) | CURRENT_ITEM_REVISION | |
| REVISION_LABEL | VARCHAR2 | (4000) | Revision Label | |
| INCLUDE_IN_COST_ROLLUP | NUMBER | INCLUDE_IN_COST_ROLLUP | ||
| COMPONENT_YIELD_FACTOR | NUMBER | COMPONENT_YIELD_FACTOR | ||
| PLANNING_FACTOR | NUMBER | PLANNING_FACTOR | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | CHANGE_NOTICE | |
| STRUCTURE_TYPE | VARCHAR2 | (4000) | Structure Type Display | |
| USER_ITEM_TYPE | CHAR | (8) | USER_ITEM_TYPE | |
| CHANGE_ID | NUMBER | Change Id for the Engineering Change Order | ||
| CATALOG_CATEGORY | VARCHAR2 | (4000) | Catalog Category Group | |
| ENG_ITEM_FLAG | VARCHAR2 | (1) | Engineering Item Flag | |
| PARENT_SORT_ORDER | VARCHAR2 | (2000) | Parent Sort Order for Sorting the Components in a Tree Structure | |
| LONG_DESCRIPTION | VARCHAR2 | (4000) | Components Long Description | |
| REVISION_CODE | VARCHAR2 | (4000) | ||
| STRUCTURE_TYPE_ID | NUMBER | Structure Type Identifier | ||
| SUGGESTED_VENDOR_NAME | VARCHAR2 | (240) | Used by direct items in EAM BOMs | |
| VENDOR_ID | NUMBER | Used by direct items in EAM BOMs | ||
| UNIT_PRICE | NUMBER | Unit Price for direct items used by EAM BOMs | ||
| PK1_VALUE | VARCHAR2 | (240) | PK Columns | |
| PK2_VALUE | VARCHAR2 | (240) | PK Columns | |
| PK3_VALUE | VARCHAR2 | (240) | PK Columns | |
| PK4_VALUE | VARCHAR2 | (240) | PK Columns | |
| PK5_VALUE | VARCHAR2 | (240) | PK Columns | |
| OBJ_NAME | VARCHAR2 | (30) | Object Name | |
| HGRID_FLAG | VARCHAR2 | (240) | Filter Flag | |
| CATALOG_CATEGORY_ID | NUMBER | Item Catalog Category ID | ||
| REVISION_ID | NUMBER | |||
| FROM_MINOR_REVISION_ID | NUMBER | |||
| TO_MINOR_REVISION_ID | NUMBER | |||
| FROM_MINOR_REVISION_LABEL | VARCHAR2 | (80) | ||
| TO_MINOR_REVISION_LABEL | VARCHAR2 | (80) | ||
| FROM_END_ITEM_REV_ID | NUMBER | |||
| TO_END_ITEM_REV_ID | NUMBER | |||
| FROM_END_ITEM_REVISION_LABEL | VARCHAR2 | (80) | ||
| TO_END_ITEM_REVISION_LABEL | VARCHAR2 | (80) | ||
| FROM_END_ITEM_MINOR_REV_ID | NUMBER | |||
| TO_END_ITEM_MINOR_REV_ID | NUMBER | |||
| FROM_END_ITEM_MINOR_REV_LABEL | VARCHAR2 | (80) | ||
| TO_END_ITEM_MINOR_REV_LABEL | VARCHAR2 | (80) | ||
| OBJECT_VERSION | NUMBER | |||
| MAPPED_ITEM_NAME | VARCHAR2 | (40) | ||
| MAPPED_ITEM_REVISION | VARCHAR2 | (84) | ||
| MAP_STATUS | NUMBER | |||
| FROM_END_ITEM | VARCHAR2 | (40) | ||
| TO_END_ITEM | VARCHAR2 | (40) | ||
| EFFECTIVITY_CONTROL | NUMBER | |||
| ACCESS_FLAG | VARCHAR2 | (4000) | ||
| TEMPLATE_NAME | VARCHAR2 | (0) | Item Template | |
| BOM_IMPLEMENTATION_DATE | DATE | |||
| MINOR_REVISION | VARCHAR2 | (80) | ||
| ASSEMBLY_TYPE | NUMBER | Assembly Type of the BOM | ||
| GTIN_NUMBER | VARCHAR2 | (25) | ||
| GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (35) | ||
| TOP_GTIN_NUMBER | VARCHAR2 | (25) | ||
| TOP_GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| TOP_TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (35) | ||
| PARENT_GTIN_NUMBER | VARCHAR2 | (25) | ||
| PARENT_GTIN_DESCRIPTION | VARCHAR2 | (240) | ||
| PARENT_TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (35) | ||
| QUANTITY_OF_CHILDREN | NUMBER | |||
| TOTAL_QTY_AT_NEXT_LEVEL | NUMBER | |||
| IS_PREFERRED | VARCHAR2 | (1) | ||
| TRADE_ITEM_DESCRIPTOR_DESC | VARCHAR2 | (80) | Trade Item Descriptor Description | |
| GTIN_PUBLICATION_STATUS | VARCHAR2 | (1) | GTIN Publication Status | |
| ATTACHMENT_NAME | VARCHAR2 | (2048) | ||
| ACD_TYPE | NUMBER | |||
| QUANTITY_RELATED | NUMBER | |||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| STRUCTURE_DISPLAY_NAME | VARCHAR2 | (4000) | ||
| CHANGE_POLICY_VALUE | VARCHAR2 | (4000) | ||
| COMPONENT_REMARKS | VARCHAR2 | (240) | Component Comments | |
| IS_EXCLUDED_BY_RULE | VARCHAR2 | (4000) | Whether the component is excluded by rule or not. | |
| WIP_SUPPLY_TYPE | NUMBER | |||
| LOCATOR | VARCHAR2 | (40) | ||
| GROUP_ID | NUMBER | |||
| PARENT_IMPLEMENTATION_DATE | DATE | |||
| PARENT_CHANGE_NOTICE | VARCHAR2 | (10) | ||
| COMP_FIXED_REV_CODE | VARCHAR2 | (4000) | Holds the value of fixed revision code for Fixed Rev Components. | |
| SOURCE_BILL_SEQUENCE_ID | NUMBER | Source Bill Sequence Id | ||
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common Component Sequence Id | ||
| COMP_SOURCE_BILL_SEQ_ID | NUMBER | Comp Source Bill Seq Id | ||
| INVERSE_QUANTITY | NUMBER | Inverse of Component Quantity | ||
| COMP_EFFECTIVITY_CONTROL | NUMBER | |||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | |||
| FROM_END_ITEM_REVISION_CODE | VARCHAR2 | (3) | ||
| TO_END_ITEM_REVISION_CODE | VARCHAR2 | (3) | ||
| ENFORCE_INT_REQUIREMENTS | NUMBER | |||
| PARENT_REVISION_CODE | VARCHAR2 | (4000) | ||
| PARENT_REVISION_LABEL | VARCHAR2 | (4000) | ||
| PARENT_REVISION_ID | NUMBER | |||
| COMMON_ITEM_NAME | VARCHAR2 | (255) | ||
| COMMON_ORGANIZATION_NAME | VARCHAR2 | (240) | ||
| STRUCTURE_DESC | VARCHAR2 | (240) | ||
| STYLE_ITEM_ID | NUMBER | |||
| STYLE_ITEM_FLAG | VARCHAR2 | (1) |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TOP_BILL_SEQUENCE_ID | NUMBER | Y | Bill identifier of top level bill | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| PLAN_LEVEL | NUMBER | Y | Level in indented structure | |
| EXTENDED_QUANTITY | NUMBER | Extended quantity | ||
| ITEM_NUM | NUMBER | Sequence number in routing | ||
| SORT_ORDER | VARCHAR2 | (2000) | Y | Sort order for retrieving tree information |
| GROUP_ID | NUMBER | Group identifier | ||
| ITEM_COST | NUMBER | Item cost | ||
| RESERVABLE_TYPE | NUMBER | Flag to show if item is reservable | ||
| EXTEND_COST_FLAG | NUMBER | Flag to show if costs should be extended | ||
| TOP_ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate of top level bill | |
| TOP_ITEM_ID | NUMBER | Item identifier of top level bill | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| DISABLE_DATE | DATE | Disable date | ||
| IMPLEMENTATION_DATE | DATE | Implementation date | ||
| OPTIONAL | NUMBER | Flag to show if component is optional | ||
| PLANNING_FACTOR | NUMBER | Planning factor | ||
| COMPONENT_YIELD_FACTOR | NUMBER | Component yield factor | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | Flag to show if item should be included in cost rollup | ||
| WIP_SUPPLY_TYPE | NUMBER | Supply type | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator | ||
| COMPONENT_REMARKS | VARCHAR2 | (240) | Component remarks | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| BASIS_TYPE | VARCHAR2 | (80) | ||
| COMPONENT_QUANTITY | NUMBER | Quantity | ||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Lead time percent | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag to show if options below are mutually exclusive | ||
| CHECK_ATP | NUMBER | Flag to indicate if ATP check should be performed | ||
| REQUIRED_TO_SHIP | NUMBER | Flag to show if item is required to ship | ||
| SO_BASIS | VARCHAR2 | (80) | Order basis | |
| REQUIRED_FOR_REVENUE | NUMBER | Flag to show if item is required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag to indicate if item is to be shown on shipping documents | ||
| MINIMUM_QUANTITY | NUMBER | minimum order quantity | ||
| MAXIMUM_QUANTITY | NUMBER | maximum order quantity | ||
| UNIT_OF_MEASURE | VARCHAR2 | (3) | Unit of measure | |
| ITEM_TYPE | VARCHAR2 | (30) | User defined item type | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ENG_ITEM_FLAG | VARCHAR2 | (1) | Y | Flag showing if item is an engineering item |
| CUM_MANUFACTURING_LEAD_TIME | NUMBER | Cumulative manufacturing lead time | ||
| CUMULATIVE_TOTAL_LEAD_TIME | NUMBER | Cumulative total lead time | ||
| MANUFACTURING_LEAD_TIME | NUMBER | Manufacturing lead time | ||
| PARENT_ITEM_ID | NUMBER | Parent item identifier | ||
| PARENT_ALTERNATE | VARCHAR2 | (10) | Alternate of parent bill | |
| ENG_BILL | NUMBER | Y | Flag showing if bill is an engineering bill | |
| DISPLAY_PLAN_LEVEL | VARCHAR2 | (4000) | Formatted plan level | |
| EFFECTIVITY_TIME | VARCHAR2 | (5) | Effective time | |
| DISABLE_TIME | VARCHAR2 | (5) | Disable time | |
| EXTENDED_QUANTITY6 | NUMBER | Extended quantity | ||
| EXTENDED_COST | NUMBER | Extended cost | ||
| OPERATION_SEQ_NUM7 | NUMBER | Operation sequence number | ||
| BOM_ITEM_TYPE | NUMBER | Y | BOM item type of item | |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | Y | Flag showing if work ordered is opened for this item |
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | Flag showing if components of this item are to be picked |
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | Flag showing if components of item should be checked for ATP |
| ATP_FLAG | VARCHAR2 | (1) | Y | Flag showing if ATP check is performed for item (item level) |
| SHIPPABLE_ITEM_FLAG | VARCHAR2 | (1) | Y | Flag showing if item is shippable |
| MRP_PLANNING_CODE | NUMBER | MPR planning option | ||
| SO_TRANSACTIONS_FLAG | VARCHAR2 | (1) | Y | Sales order transactions flag |
| CUSTOMER_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | Y | Flag indicating item is customer orderable |
| INVOICE_ENABLED_FLAG | VARCHAR2 | (1) | Y | Flag indicating item is invoiceable |
| INVENTORY_ASSET_FLAG | VARCHAR2 | (1) | Y | Flag indicating item is an inventory asset |
| ITEM_NUMBER | VARCHAR2 | (40) | Item name consisting of concatenated item flexfield segments | |
| PADDED_ITEM_NUMBER | VARCHAR2 | (40) | Item name blank padded to 40 characters | |
| AUTO_REQUEST_MATERIAL | VARCHAR2 | (1) | Auomatically create move order for the material at work order release | |
| LOOP_FLAG | NUMBER |
APPS.BOM_EXPLOSION_VIEW is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | VARCHAR2 | (18) | Rowid of table BOM_SMALL_EXPL_TEMP | |
| TOP_BILL_SEQUENCE_ID | NUMBER | Y | Bill identifier of top level bill | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| PLAN_LEVEL | NUMBER | Y | Level in indented structure | |
| EXTENDED_QUANTITY | NUMBER | Y | Extended quantity | |
| ITEM_NUM | NUMBER | Sequence number in routing | ||
| SORT_ORDER | VARCHAR2 | (2000) | Sort order for retrieving tree information | |
| GROUP_ID | NUMBER | Group identifier | ||
| ITEM_COST | NUMBER | Item cost | ||
| RESERVABLE_TYPE | NUMBER | Flag to show if item is reservable | ||
| EXTEND_COST_FLAG | NUMBER | Flag to show if costs should be extended | ||
| TOP_ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate of top level bill | |
| TOP_ITEM_ID | NUMBER | Item identifier of top level bill | ||
| IMPLEMENTATION_DATE | DATE | Implementation date | ||
| IMPLEMENTED_FLAG | NUMBER | Implemented (yes or no) | ||
| OPTIONAL | NUMBER | Flag to show if component is optional | ||
| PLANNING_FACTOR | NUMBER | Planning factor | ||
| COMPONENT_YIELD_FACTOR | NUMBER | Component yield factor | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | Flag to show if item should be included in cost rollup | ||
| WIP_SUPPLY_TYPE | NUMBER | Supply type | ||
| SUPPLY_TYPE | VARCHAR2 | (80) | Descriptor for WIP supply type | |
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator identifier | ||
| LOCATOR | VARCHAR2 | (40) | Concatenated segments of supply locator | |
| COMPONENT_REMARKS | VARCHAR2 | (240) | Component remarks | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| BASIS_TYPE | VARCHAR2 | (80) | ||
| COMPONENT_QUANTITY | NUMBER | Quantity | ||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Lead time percent | ||
| OPERATION_OFFSET | NUMBER | Lead time offset of the operation | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag to show if options below are mutually exclusive | ||
| CHECK_ATP | NUMBER | Flag to indicate if ATP check should be performed | ||
| REQUIRED_TO_SHIP | NUMBER | Flag to show if item is required to ship | ||
| SO_BASIS | VARCHAR2 | (80) | Order basis | |
| REQUIRED_FOR_REVENUE | NUMBER | Flag to show if item is required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag to indicate if item is to be shown on shipping documents | ||
| MINIMUM_QUANTITY | NUMBER | minimum order quantity | ||
| MAXIMUM_QUANTITY | NUMBER | maximum order quantity | ||
| UNIT_OF_MEASURE | VARCHAR2 | (3) | Unit of measure | |
| ITEM_TYPE | VARCHAR2 | (30) | User defined item type | |
| ITEM_TYPE_DESCRIPTION | VARCHAR2 | (80) | Description of user defined item type | |
| ITEM_STATUS | VARCHAR2 | (10) | Y | Item Status |
| DESCRIPTION | VARCHAR2 | (4000) | Description | |
| ENG_ITEM_FLAG | VARCHAR2 | (1) | Y | Flag showing if item is an engineering item |
| CUM_MANUFACTURING_LEAD_TIME | NUMBER | Cumulative manufacturing lead time | ||
| CUMULATIVE_TOTAL_LEAD_TIME | NUMBER | Cumulative total lead time | ||
| MANUFACTURING_LEAD_TIME | NUMBER | Manufacturing lead time | ||
| PARENT_ITEM_ID | NUMBER | Parent item identifier | ||
| PARENT_ALTERNATE | VARCHAR2 | (10) | Alternate of parent bill | |
| PARENT_ALTERNATE_FLAG | NUMBER | Is the parent bill an alternate? | ||
| ENG_BILL | NUMBER | Flag showing if bill is an engineering bill | ||
| DISPLAY_PLAN_LEVEL | VARCHAR2 | (4000) | Formatted plan level | |
| EFFECTIVITY_TIME | VARCHAR2 | (5) | Effective time | |
| DISABLE_TIME | VARCHAR2 | (5) | Disable time | |
| EXTENDED_QUANTITY6 | NUMBER | Y | Extended quantity | |
| EXTENDED_COST | NUMBER | Extended cost | ||
| OPERATION_SEQ_NUM7 | NUMBER | Operation sequence number | ||
| BOM_ITEM_TYPE | NUMBER | Y | BOM item type of item | |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | Y | Flag showing if work ordered is opened for this item |
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | Flag showing if components of this item are to be picked |
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | Flag showing if components of item should be checked for ATP |
| ATP_FLAG | VARCHAR2 | (1) | Y | Flag showing if ATP check is performed for item (item level) |
| SHIPPABLE_ITEM_FLAG | VARCHAR2 | (1) | Y | Flag showing if item is shippable |
| MRP_PLANNING_CODE | NUMBER | MPR planning option | ||
| SO_TRANSACTIONS_FLAG | VARCHAR2 | (1) | Y | Sales order transactions flag |
| CUSTOMER_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | Y | Flag indicating item is customer orderable |
| INVOICE_ENABLED_FLAG | VARCHAR2 | (1) | Y | Flag indicating item is invoiceable |
| INVENTORY_ASSET_FLAG | VARCHAR2 | (1) | Y | Flag indicating item is an inventory asset |
| ITEM_NUMBER | VARCHAR2 | (4000) | Item name consisting of concatenated item flexfield segments | |
| PADDED_ITEM_NUMBER | VARCHAR2 | (40) | Item name blank padded to 40 characters | |
| CURRENT_REVISION | VARCHAR2 | (3) | Current item revision of component | |
| EFFECTIVE_FROM | VARCHAR2 | (30) | ||
| EFFECTIVE_TO | VARCHAR2 | (30) | ||
| EFFECTIVITY_CONTROL | VARCHAR2 | (80) | ||
| DISABLED_FLAG | NUMBER | Disabled (Yes/No) | ||
| FROM_EFFECTIVITY_DATE | DATE | |||
| TO_EFFECTIVITY_DATE | DATE |
APPS.BOM_EXPL_INQUIRY_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row identifier | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| SEQUENCE_ID | NUMBER | Y | Sequence id | |
| LOWEST_ITEM_ID | NUMBER | Y | Identifier of item to implode | |
| COMPONENT_ITEM_ID | NUMBER | Y | Component item id | |
| SORT_CODE | VARCHAR2 | (240) | Y | Sort sequence |
| CURRENT_LEVEL | NUMBER | Y | Implosion level | |
| PARENT_ITEM_ID | NUMBER | Assembly item identifier | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| PARENT | VARCHAR2 | (40) | Parent item | |
| PARENT_DESCRIPTION | VARCHAR2 | (240) | Parent description | |
| PARENT_UOM | VARCHAR2 | (3) | Parent unit of measure | |
| ITEM_TYPE | VARCHAR2 | (80) | Item type | |
| PARENT_ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Parent alternate BOM designator | |
| COMPONENT_OP_SEQ_NUM | NUMBER | Component operation sequence number | ||
| COMPONENT_REVISION | VARCHAR2 | (3) | Y | Component revision |
| BASIS_TYPE | VARCHAR2 | (80) | Basis type identifier | |
| COMPONENT_QUANTITY | NUMBER | Component quantity | ||
| PARENT_ENGINEERING_BILL | NUMBER | Parent engineering bill | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Change notice | |
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Revised item sequence identifier | ||
| IMPLEMENTED_FLAG | NUMBER | Implemented flag | ||
| ITEM_STATUS | VARCHAR2 | (10) | Y | Item status |
| COMPONENT_EFFECTIVE_FROM | VARCHAR2 | (80) | Component effective from | |
| COMPONENT_EFFECTIVE_TO | VARCHAR2 | (80) | Component effective to date | |
| EFFECTIVITY_CONTROL | VARCHAR2 | (80) | Y | Effectivity control |
| DISABLED_FLAG | NUMBER | DIsabled flag | ||
| ORG_NAME | VARCHAR2 | (240) | Y | Organization name |
| COMPONENT_NAME | VARCHAR2 | (40) | Component name | |
| COMPONENT_DESCRIPTION | VARCHAR2 | (240) | Component description | |
| REVISION_LABEL | VARCHAR2 | (80) | Revision label | |
| STRUCTURE_TYPE_NAME | VARCHAR2 | (30) | Structure type name | |
| ITEM_CATALOG_GROUP_NAME | VARCHAR2 | (4000) | Item catalog group name | |
| CHANGE_ID | NUMBER | Engineering change identifier | ||
| PARENT_SORT_CODE | VARCHAR2 | (240) | Sort sequence of parent | |
| LIFECYCLE_ID | NUMBER | Lifecycle identifier | ||
| CURRENT_PHASE_ID | NUMBER | Current phase identifier | ||
| TOP_ITEM_FLAG | VARCHAR2 | (1) | indicating the topmost item in the BOM | |
| PK1_VALUE | VARCHAR2 | (50) | Primary key of the object | |
| PK2_VALUE | VARCHAR2 | (50) | Primary key of the object | |
| OBJ_NAME | VARCHAR2 | (50) | Object name | |
| CURRENT_PK1_VALUE | VARCHAR2 | (50) | Primary key | |
| CURRENT_PK2_VALUE | VARCHAR2 | (50) | Primary key | |
| REVISION_ID | NUMBER | Y | Revision id | |
| GTIN_NUMBER | VARCHAR2 | (255) | Gtin Number | |
| GTIN_DESCRIPTION | VARCHAR2 | (240) | Gtin Description | |
| TRADE_ITEM_DESCRIPTOR | VARCHAR2 | (150) | Trade Item Descriptor | |
| COMPONENT_SEQUENCE_ID | NUMBER | Component Sequence Id | ||
| LAST_UPDATE_DATE | DATE | Y | Standard WHO column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO column | |
| CREATION_DATE | DATE | Y | Standard WHO column | |
| CREATED_BY | NUMBER | Standard WHO column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO column | ||
| STRUCTURE_TYPE_ID | NUMBER | Structure Type id | ||
| STRUCTURE_TYPE_DISP_NAME | VARCHAR2 | (80) | Structure Type Display Name | |
| PRIMARY_UOM_DESCRIPTOR | VARCHAR2 | (50) | Primary UOM Description | |
| STRUCTURE_NAME | VARCHAR2 | (4000) | Structure nam,e | |
| GTIN_PUBLICATION_STATUS | CHAR | (1) | GTIN publication status | |
| ACCESS_FLAG | VARCHAR2 | (1) | View Privilege | |
| REVISION | VARCHAR2 | (3) | Y | Revision |
| COMP_REVISION_ON_IMPL_DATE | VARCHAR2 | (80) | Component revision on implementation date | |
| IS_EXCLUDED_BY_RULE | VARCHAR2 | (1) | Is excluded by rule | |
| COMP_REVCODE_ON_IMPL_DATE | VARCHAR2 | (3) | Y | COmponent revision code in implementation date |
| REVISION_CODE | VARCHAR2 | (3) | Revision code |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_ID | NUMBER | (22) | Y | Implosion identifier |
| LOWEST_ITEM_ID | NUMBER | Y | Identifier of item imploded | |
| SORT_CODE | VARCHAR2 | (2000) | Y | Sort sequence |
| CURRENT_LEVEL | NUMBER | Y | Level of implosion | |
| PARENT_ITEM_ID | NUMBER | Identifier of parent item | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| PARENT | VARCHAR2 | (40) | Concatenated item flex segments of parent item | |
| PARENT_DESCRIPTION | VARCHAR2 | (240) | Description of parent item | |
| PARENT_UOM | VARCHAR2 | (3) | Unit of measure of parent item | |
| PARENT_ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate bom designator of assembly | |
| PARENT_ENGINEERING_BILL | NUMBER | Indicates if parent is an engineering or manufacturing bill | ||
| COMPONENT_OP_SEQ_NUM | NUMBER | Operation sequence number at which component is used in bill | ||
| COMPONENT_EFFECTIVE_DATE | DATE | Date on which component is effective in bill | ||
| COMPONENT_DISABLE_DATE | DATE | Date on which component is disabled in bill | ||
| BASIS_TYPE | VARCHAR2 | (80) | ||
| COMPONENT_QUANTITY | NUMBER | Quantity of component used in bill | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Status of parent item on an ECO | ||
| ITEM_TYPE | VARCHAR2 | (30) | User defined item type | |
| DISPLAY_PLAN_LEVEL | VARCHAR2 | (4000) | Formatted plan level for reporting | |
| IMPLEMENTED_FLAG | NUMBER | Implemented (yes or no) |
APPS.BOM_IMPLOSION_VIEW is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row identifier | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| SEQUENCE_ID | NUMBER | Y | Implosion identifier | |
| LOWEST_ITEM_ID | NUMBER | Y | Identifier of item to implode | |
| COMPONENT_ITEM_ID | NUMBER | Y | Component item identifier | |
| SORT_CODE | VARCHAR2 | (240) | Y | Sort sequence |
| CURRENT_LEVEL | NUMBER | Y | Implosion level | |
| PARENT_ITEM_ID | NUMBER | Assembly item identifier | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| PARENT | VARCHAR2 | (4000) | Parent item | |
| PARENT_DESCRIPTION | VARCHAR2 | (4000) | Parent item description | |
| PARENT_UOM | VARCHAR2 | (3) | Parent item's unit of measure | |
| ITEM_TYPE | VARCHAR2 | (80) | Parent item's user defined item type | |
| PARENT_ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Parent's alternate bom designator | |
| COMPONENT_OP_SEQ_NUM | NUMBER | Component's operation sequence number | ||
| COMPONENT_REVISION | VARCHAR2 | (3) | Y | Component's revision |
| BASIS_TYPE | VARCHAR2 | (80) | ||
| COMPONENT_QUANTITY | NUMBER | Component quantity | ||
| PARENT_ENGINEERING_BILL | NUMBER | Flag indicating if parent bill is engineering or manufacturing | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order | |
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Revised item unique identifier | ||
| IMPLEMENTED_FLAG | NUMBER | Indicator if component row is implemented or pending | ||
| ITEM_STATUS | VARCHAR2 | (10) | Y | Component's item status code |
| COMPONENT_EFFECTIVE_FROM | VARCHAR2 | (30) | ||
| COMPONENT_EFFECTIVE_TO | VARCHAR2 | (30) | ||
| EFFECTIVITY_CONTROL | VARCHAR2 | (80) | ||
| DISABLED_FLAG | NUMBER | Disabled (Yes/No) | ||
| ORG_NAME | VARCHAR2 | (240) | Y | |
| COMPONENT_NAME | VARCHAR2 | (4000) | Component name | |
| REVISION_LABEL | VARCHAR2 | (80) | Revision Label | |
| PARENT_SORT_CODE | VARCHAR2 | (240) | ||
| LIFECYCLE_ID | NUMBER | |||
| CURRENT_PHASE_ID | NUMBER | |||
| COMPONENT_EFFECTIVE_FROM_DATE | DATE | |||
| COMPONENT_EFFECTIVE_TO_DATE | DATE |
APPS.BOM_IMPL_INQUIRY_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_ID | NUMBER | Y | Implosion identifier | |
| LOWEST_ITEM_ID | NUMBER | Y | Identifier of item imploded | |
| SORT_CODE | VARCHAR2 | (240) | Y | Sort sequence |
| CURRENT_LEVEL | NUMBER | Y | Level of implosion | |
| PARENT_ITEM_ID | NUMBER | Identifier of parent item | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| PARENT | VARCHAR2 | (40) | Concatenated item flex segments of parent item | |
| PARENT_DESCRIPTION | VARCHAR2 | (240) | Description of parent item | |
| PARENT_UOM | VARCHAR2 | (3) | Unit of measure of parent item | |
| PARENT_ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate bom designator of assembly | |
| PARENT_ENGINEERING_BILL | NUMBER | Indicates if parent is an engineering or manufacturing bill | ||
| COMPONENT_OP_SEQ_NUM | NUMBER | Operation sequence number at which component is used in bill | ||
| COMPONENT_EFFECTIVE_DATE | DATE | Date on which component is effective in bill | ||
| COMPONENT_EFFECTIVE_TIME | VARCHAR2 | (5) | Time at which component is effective in bill | |
| COMPONENT_DISABLE_DATE | DATE | Date on which component is disabled in bill | ||
| COMPONENT_DISABLE_TIME | VARCHAR2 | (5) | Time at which component is disabled in bill | |
| BASIS_TYPE | VARCHAR2 | (80) | ||
| COMPONENT_QUANTITY | NUMBER | Quantity of component used in bill | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Status of parent item on an ECO | ||
| ITEM_TYPE | VARCHAR2 | (30) | User defined item type | |
| DISPLAY_PLAN_LEVEL | VARCHAR2 | (4000) | Formatted plan level for reporting | |
| IMPLEMENTED_FLAG | NUMBER | Implemented (yes or no) |
APPS.BOM_IMPL_INQUIRY_VIEW is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
BOM_INVENTORY_COMPONENTS stores information of BOM_COMPONENTS_B which further stores information about bills of material components and stores single-level components.This lists the first level components of an assembly item
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_SEQ_NUM | NUMBER | Y | Operation sequence number | |
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ITEM_NUM | NUMBER | Item sequence within bill of material structure | ||
| BASIS_TYPE | NUMBER | Basis Type - Item or Lot | ||
| COMPONENT_QUANTITY | NUMBER | Y | Quantity of component in bill of material | |
| COMPONENT_YIELD_FACTOR | NUMBER | Y | Factor used to multiply component quantity with to obtain required component quantity | |
| COMPONENT_REMARKS | VARCHAR2 | (240) | Component remarks | |
| EFFECTIVITY_DATE | DATE | Y | Effective date | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| IMPLEMENTATION_DATE | DATE | Date on which engineering change order was implemented | ||
| DISABLE_DATE | DATE | Disable date | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PLANNING_FACTOR | NUMBER | Y | Factor used to multiply component quantity with to obtain planning quantity | |
| QUANTITY_RELATED | NUMBER | Y | Identifier to indicate if this component has quantity related reference designators | |
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Management to determine how many units of component to put on an order | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | Y | Flag indicating if this component is to be used when rolling up costs | |
| CHECK_ATP | NUMBER | Y | Flag indicating if ATP check is required | |
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to ship | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is displayed on shipping documents | ||
| INCLUDE_ON_BILL_DOCS | NUMBER | (not currently used) | ||
| LOW_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| HIGH_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| ACD_TYPE | NUMBER | Add, change, or disable code for component on an engineering change order | ||
| OLD_COMPONENT_SEQUENCE_ID | NUMBER | Identifier of original component row an ECO effects | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| WIP_SUPPLY_TYPE | NUMBER | WIP supply type code | ||
| PICK_COMPONENTS | NUMBER | (not currently used) | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator identifier | ||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Operation offset from first operation in routing (denormalized from corresponding column in BOM_OPERATION_SEQUNCES) | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Engineering change order revised item identifier | ||
| COST_FACTOR | NUMBER | (not currently used) | ||
| BOM_ITEM_TYPE | NUMBER | Type of item (denormalized from BOM Item Type in MTL_SYSTEM_ITEMS) | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | From End Item Unit Number | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | To End Item Unit Number | |
| COMPONENT_ITEM_REVISION_ID | NUMBER | Item revision Identifier | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original system that data for the current record has come from | |
| ECO_FOR_PRODUCTION | NUMBER | Indicates if this component on an Engineering Change Order is only for WIP jobs | ||
| DELETE_GROUP_NAME | VARCHAR2 | (10) | Delete group name for the entity type you are deleting | |
| DG_DESCRIPTION | VARCHAR2 | (240) | Description of the delete group | |
| ENFORCE_INT_REQUIREMENTS | NUMBER | Enforce Integer Requirements | ||
| OPTIONAL_ON_MODEL | NUMBER | Flag indicating if component is optional on model bill (for ATO) | ||
| PARENT_BILL_SEQ_ID | NUMBER | Common bill sequence id of the model bill (for ATO) | ||
| MODEL_COMP_SEQ_ID | NUMBER | Component sequence identifier from model bill (for ATO) | ||
| PLAN_LEVEL | NUMBER | Plan level based on model bill (for ATO) | ||
| AUTO_REQUEST_MATERIAL | VARCHAR2 | (1) | Auto Request Material | |
| SUGGESTED_VENDOR_NAME | VARCHAR2 | (240) | Suggested vendor name will be used for direct items for EAM BOMs | |
| VENDOR_ID | NUMBER | Suggested Vendor ID column | ||
| UNIT_PRICE | NUMBER | Unit Price for direct items used by EAM BOMs | ||
| OBJ_NAME | VARCHAR2 | (30) | Object name | |
| PK1_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK2_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK3_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK4_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| PK5_VALUE | VARCHAR2 | (240) | Primary key of the object | |
| FROM_END_ITEM_REV_ID | NUMBER | From End Item Revision Id | ||
| TO_END_ITEM_REV_ID | NUMBER | To End Item Revision Id | ||
| OVERLAPPING_CHANGES | NUMBER | Overlapping Changes | ||
| FROM_OBJECT_REVISION_ID | NUMBER | From Object Revision Id | ||
| FROM_MINOR_REVISION_ID | NUMBER | From Minor Revision Id | ||
| TO_OBJECT_REVISION_ID | NUMBER | To Object Revision Id | ||
| TO_MINOR_REVISION_ID | NUMBER | To Minor Revision Id | ||
| FROM_END_ITEM_MINOR_REV_ID | NUMBER | From End Item Minor Revision Id | ||
| TO_END_ITEM_MINOR_REV_ID | NUMBER | To End Item Minor Revision Id | ||
| COMPONENT_MINOR_REVISION_ID | NUMBER | Component Minor Revision Id | ||
| FROM_BILL_REVISION_ID | NUMBER | From bill revision id | ||
| TO_BILL_REVISION_ID | NUMBER | To bill revision id | ||
| FROM_STRUCTURE_REVISION_CODE | VARCHAR2 | (30) | From structure revision code | |
| TO_STRUCTURE_REVISION_CODE | VARCHAR2 | (30) | To structure revision code | |
| FROM_END_ITEM_STRC_REV_ID | NUMBER | From end item structure revision id | ||
| TO_END_ITEM_STRC_REV_ID | NUMBER | TO end item structure revision id | ||
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common Component Sequence Id |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row identifier | |
| OPERATION_SEQ_NUM | NUMBER | Y | Sequence number of the operation | |
| COMPONENT_ITEM_ID | NUMBER | COmponent item id | ||
| LAST_UPDATE_DATE | DATE | Y | Standard WHO column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO column | |
| CREATION_DATE | DATE | Y | Standard WHO column | |
| CREATED_BY | NUMBER | Y | Standard WHO column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO column | ||
| ITEM_NUM | NUMBER | Item number | ||
| COMPONENT_QUANTITY | NUMBER | Y | Component quantity | |
| COMPONENT_YIELD_FACTOR | NUMBER | Y | Component yield factor | |
| COMPONENT_REMARKS | VARCHAR2 | (240) | Component remarks | |
| EFFECTIVITY_DATE | DATE | Y | Effective date | |
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | From end item unit number | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | To end item unit number | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change notice | |
| IMPLEMENTATION_DATE | DATE | Implementation date | ||
| IMPL_CB | NUMBER | |||
| DISABLE_DATE | DATE | Disable date | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Flex structure defining columns | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PLANNING_FACTOR | NUMBER | Y | Planning factor | |
| QUANTITY_RELATED | NUMBER | Y | Related quantity | |
| SO_BASIS | NUMBER | QUantity basis used by Oracle Order Mgmt to determine how many units of components to put on an order | ||
| OPTIONAL | NUMBER | indicating if quantity is optional in bill | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag indicating if one or more children of component can be picked up when taking an order | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | Y | Flag indicating if component is to be used when rolling up cost | |
| CHECK_ATP | NUMBER | Y | Flag indicating if ATP check is required | |
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to be shipped | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to be shipped | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicatinf if component s required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is required for shipping documents | ||
| INCLUDE_ON_BILL_DOCS | NUMBER | not used | ||
| LOW_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| HIGH_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| ACD_TYPE | NUMBER | ACD type | ||
| OLD_COMPONENT_SEQUENCE_ID | NUMBER | Sequnce id of original component record in ECO | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Sequence id of the component | |
| BILL_SEQUENCE_ID | NUMBER | Y | Sequence id of the BILL | |
| REQUEST_ID | NUMBER | Concurrent WHO columns | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent WHO columns | ||
| PROGRAM_ID | NUMBER | Concurrent WHO columns | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent WHO columns | ||
| WIP_SUPPLY_TYPE | NUMBER | Work in process supply type | ||
| SUPPLY_TYPE | VARCHAR2 | (80) | Supply type | |
| PICK_COMPONENTS | NUMBER | not used | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supplu subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator type | ||
| SUPPLY_LOCATOR | VARCHAR2 | (1) | Supply locator | |
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Operation lead time percentage | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Revised item sequence id | ||
| COST_FACTOR | NUMBER | not used | ||
| BOM_ITEM_TYPE | NUMBER | BOM item type | ||
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | Primary unit of measure | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ENG_ITEM_FLAG | VARCHAR2 | (1) | Y | Flag indicating if the item is an engineering item |
| INVENTORY_ITEM_STATUS_CODE | VARCHAR2 | (10) | Y | Status code of the item |
| SHIPPABLE_ITEM_FLAG | VARCHAR2 | (1) | Y | Flag indicating if the item is shippable |
| ITEM_LOCATOR_CONTROL | NUMBER | Item locator control | ||
| RESTRICT_LOCATORS_FLAG | NUMBER | Restrict locators flag | ||
| RESTRICT_SUBINVENTORIES_FLAG | VARCHAR2 | (1) | Restrict subinventories flag | |
| ITEM_TYPE | VARCHAR2 | (80) | Item type | |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | Y | Replenish to order flag |
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | ATP components flag |
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | Pick components flag |
| INVENTORY_ASSET_FLAG | VARCHAR2 | (1) | Y | Inventory assets flag |
| ATP_FLAG | VARCHAR2 | (1) | Y | ATP flag |
| FORECAST_CONTROL | NUMBER | Forecast control | ||
| DISABLE_CB | NUMBER | |||
| ECO_FOR_PRODUCTION | NUMBER | Engineering change ordre for production | ||
| ENFORCE_INT_REQUIREMENTS | NUMBER | Enforce initial requirements | ||
| ENFORCE_INT_REQUIREMENTS_DESC | VARCHAR2 | (80) | Enforce initial requirements description | |
| AUTO_REQUEST_MATERIAL | VARCHAR2 | (1) | Auto request material | |
| EFFECTIVITY_CONTROL | NUMBER | Effectivity control | ||
| CURRENT_REVISION | VARCHAR2 | (3) | Current revision | |
| COMPONENT_ITEM_NAME | VARCHAR2 | (40) | Component item name |
APPS.BOM_INVENTORY_COMPONENTS_ERV is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unqiue identifier | |
| OPERATION_SEQ_NUM | NUMBER | Y | Operation sequence number | |
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ITEM_NUM | NUMBER | Item sequence within bill of material structure | ||
| BASIS_TYPE | NUMBER | |||
| COMPONENT_QUANTITY | NUMBER | Y | Quantity of component in bill of material | |
| COMPONENT_YIELD_FACTOR | NUMBER | Y | Factor used to multiply component quantity with to obtain component quantity | |
| COMPONENT_REMARKS | VARCHAR2 | (240) | Component remarks | |
| EFFECTIVITY_DATE | DATE | Y | Effective date | |
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | From End Item Unit Number | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | To End Item Unit Number | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| IMPLEMENTATION_DATE | DATE | Date on which engineering change order was implemented | ||
| IMPL_CB | NUMBER | Implementation flag | ||
| DISABLE_DATE | DATE | Disable date | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PLANNING_FACTOR | NUMBER | Y | Factor used to multiply component quantity with to obtain planning quantity | |
| QUANTITY_RELATED | NUMBER | Y | Identifier to indicate if this component has quantity related reference designators | |
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Entry to determine how many units of component to put on an order | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | Y | Flag indicating if this component is to be used when rolling up costs | |
| CHECK_ATP | NUMBER | Y | Flag indicating if ATP check is required | |
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to ship | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is displayed on shipping documents | ||
| INCLUDE_ON_BILL_DOCS | NUMBER | (not currently used) | ||
| LOW_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| HIGH_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| ACD_TYPE | NUMBER | Add, change or disable code for component on an engineering change order | ||
| OLD_COMPONENT_SEQUENCE_ID | NUMBER | Identifier of original component row an ECO affects | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| WIP_SUPPLY_TYPE | NUMBER | WIP supply type code | ||
| SUPPLY_TYPE | VARCHAR2 | (80) | Supply type code | |
| PICK_COMPONENTS | NUMBER | (not currently used) | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator identifier | ||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Operation offset from first operation in routing | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Engineering change order revised item identifier | ||
| COST_FACTOR | NUMBER | (not currently used) | ||
| BOM_ITEM_TYPE | NUMBER | Type of item | ||
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | Primary unit of measure code | |
| DESCRIPTION | VARCHAR2 | (240) | Item description | |
| ENG_ITEM_FLAG | VARCHAR2 | (1) | Y | Flag indicating engineering item |
| INVENTORY_ITEM_STATUS_CODE | VARCHAR2 | (10) | Y | Material status code |
| SHIPPABLE_ITEM_FLAG | VARCHAR2 | (1) | Y | Flag indicating shippable item |
| ITEM_LOCATOR_CONTROL | NUMBER | Stock locator control code | ||
| RESTRICT_LOCATORS_FLAG | NUMBER | Locators restrictions type | ||
| RESTRICT_SUBINVENTORIES_FLAG | VARCHAR2 | (1) | Subinventories restrictions type | |
| ITEM_TYPE | VARCHAR2 | (80) | QuickCode meaning | |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | Y | Assemble to Order flag |
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | Flag indicating whether item may have components requiring ATP check |
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | Flag indicating all shippable components of should be picked |
| INVENTORY_ASSET_FLAG | VARCHAR2 | (1) | Y | Flag indicating item is an inventory asset |
| ATP_FLAG | VARCHAR2 | (1) | Y | Flag indicating ATP must be checked when item is ordered |
| FORECAST_CONTROL | NUMBER | Type of forecast control for ATO | ||
| DISABLE_CB | NUMBER | |||
| ECO_FOR_PRODUCTION | NUMBER | |||
| ENFORCE_INT_REQUIREMENTS | NUMBER | Enforce Integer Requirements | ||
| ENFORCE_INT_REQUIREMENTS_DESC | VARCHAR2 | (80) | Enforce Integer Requirements Description | |
| FROM_BILL_REVISION_ID | NUMBER | From Bill Revision Id | ||
| TO_BILL_REVISION_ID | NUMBER | To Bill Revision Id | ||
| AUTO_REQUEST_MATERIAL | VARCHAR2 | (1) | ||
| SUGGESTED_VENDOR_NAME | VARCHAR2 | (240) | ||
| VENDOR_ID | NUMBER | |||
| UNIT_PRICE | NUMBER | |||
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common Component Sequence Id |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Rowid from table BOM_INVENTORY_COMPS_INTERFACE | |
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| COMPONENT_ITEM_NUMBER | VARCHAR2 | (40) | ||
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ITEM_NUM | NUMBER | Item sequence within bill of material structure | ||
| COMPONENT_QUANTITY | NUMBER | Quantity of component in bill of material | ||
| COMPONENT_YIELD_FACTOR | NUMBER | Factor used to multiply component quantity to obtain component quantity | ||
| DISABLE_DATE | DATE | Disable date | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PLANNING_FACTOR | NUMBER | Factor used to multiply component quantity with to obtain planning quantity | ||
| QUANTITY_RELATED | NUMBER | Identifier to indicate if this component has quantity related reference designators | ||
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Entry to determine how many units of component to put on an order | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | Flag indicating if this component is to be used when rolling up costs | ||
| CHECK_ATP | NUMBER | Flag indicating if ATP check is required | ||
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to ship | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is displayed on shipping documents | ||
| INCLUDE_ON_BILL_DOCS | NUMBER | (not currently used) | ||
| LOW_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| HIGH_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| ACD_TYPE | NUMBER | Add, change or disable code for component on an engineering change order | ||
| OLD_COMPONENT_SEQUENCE_ID | NUMBER | Identifier of original component row that an ECO affects | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| WIP_SUPPLY_TYPE | NUMBER | WIP supply type code | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator identifier | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Engineering change order revised item identifier | ||
| COST_FACTOR | NUMBER | (not currently used) | ||
| DDF_CONTEXT1 | VARCHAR2 | (30) | used by Mass Change | |
| DDF_CONTEXT2 | VARCHAR2 | (30) | used by Mass Change | |
| DESCRIPTION | VARCHAR2 | (240) | Item description | |
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | Primary unit of measure code | |
| BOM_ITEM_TYPE | NUMBER | Y | Type of item | |
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | Flag indicating whether item may have components requiring ATP check |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | Y | Assemble to Order flag |
| DEFAULT_SHIPPABLE | NUMBER | Default shippable flag from table MTL_SYSTEM_ITEMS | ||
| DEFAULT_COST_ROLLUP | NUMBER | Default Include in Cost Rollup flag from table MTL_SYSTEM_ITEMS | ||
| DEFAULT_WIP_SUPPLY_TYPE | NUMBER | Default supply type from table MTL_SYSTEM_ITEMS | ||
| DEFAULT_SUPPLY_LOCATOR_ID | NUMBER | Supply locator for WIP transactions | ||
| DEFAULT_SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory for WIP transactions | |
| DEFAULT_CHECK_ATP | NUMBER | Default Available to Promise flag from table MTL_SYSTEM_ITEMS | ||
| ITEM_LOCATOR_CONTROL | NUMBER | Used to control supply locator flexfield | ||
| RESTRICT_LOCATORS_FLAG | VARCHAR2 | (1) | Used to control Supply Locator flexfield | |
| RESTRICT_SUBINVENTORIES_FLAG | VARCHAR2 | (1) | Used to control Subinventory LOV | |
| INVENTORY_ASSET_FLAG | VARCHAR2 | (1) | Y | Flag indicating item is an inventory asset |
| SHIPPABLE_ITEM_FLAG | VARCHAR2 | (1) | Y | Flag indicating shippable item |
| REVISION | VARCHAR2 | (3) | Y | Current item revision of component |
| ITEM_TYPE_NAME | VARCHAR2 | (80) | QuickCode meaning | |
| ACD_TYPE_NAME | VARCHAR2 | (80) | Y | Meaning of Add, Change or Disable code |
| SUPPLY_TYPE | VARCHAR2 | (80) | Meaning of Supply Type code | |
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | To End Item Unit Number | |
| LOCATOR | VARCHAR2 | (1) | Locator |
APPS.BOM_INV_COMPS_INTERFACE_ERV is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Rowid from table BOM_INVENTORY_COMPS_INTERFACE | |
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ITEM_NUM | NUMBER | Item sequence within bill of material structure | ||
| COMPONENT_QUANTITY | NUMBER | Quantity of component in bill of material | ||
| COMPONENT_YIELD_FACTOR | NUMBER | Factor used to multiply component quantity to obtain component quantity | ||
| DISABLE_DATE | DATE | Disable date | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PLANNING_FACTOR | NUMBER | Factor used to multiply component quantity with to obtain planning quantity | ||
| QUANTITY_RELATED | NUMBER | Identifier to indicate if this component has quantity related reference designators | ||
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Entry to determine how many units of component to put on an order | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| INCLUDE_IN_COST_ROLLUP | NUMBER | Flag indicating if this component is to be used when rolling up costs | ||
| CHECK_ATP | NUMBER | Flag indicating if ATP check is required | ||
| SHIPPING_ALLOWED | NUMBER | Flag indicating if component is allowed to ship | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is displayed on shipping documents | ||
| INCLUDE_ON_BILL_DOCS | NUMBER | (not currently used) | ||
| LOW_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| HIGH_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| ACD_TYPE | NUMBER | Add, change or disable code for component on an engineering change order | ||
| OLD_COMPONENT_SEQUENCE_ID | NUMBER | Identifier of original component row that an ECO affects | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| WIP_SUPPLY_TYPE | NUMBER | WIP supply type code | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator identifier | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Engineering change order revised item identifier | ||
| COST_FACTOR | NUMBER | (not currently used) | ||
| DDF_CONTEXT1 | VARCHAR2 | (30) | used by Mass Change | |
| DDF_CONTEXT2 | VARCHAR2 | (30) | used by Mass Change | |
| DESCRIPTION | VARCHAR2 | (240) | Item description | |
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | Primary unit of measure code | |
| BOM_ITEM_TYPE | NUMBER | Y | Type of item | |
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | Flag indicating whether item may have components requiring ATP check |
| REPLENISH_TO_ORDER_FLAG | VARCHAR2 | (1) | Y | Assemble to Order flag |
| DEFAULT_SHIPPABLE | NUMBER | Default shippable flag from table MTL_SYSTEM_ITEMS | ||
| DEFAULT_COST_ROLLUP | NUMBER | Default Include in Cost Rollup flag from table MTL_SYSTEM_ITEMS | ||
| DEFAULT_WIP_SUPPLY_TYPE | NUMBER | Default supply type from table MTL_SYSTEM_ITEMS | ||
| DEFAULT_SUPPLY_LOCATOR_ID | NUMBER | Supply locator for WIP transactions | ||
| DEFAULT_SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory for WIP transactions | |
| DEFAULT_CHECK_ATP | NUMBER | Default Available to Promise flag from table MTL_SYSTEM_ITEMS | ||
| ITEM_LOCATOR_CONTROL | NUMBER | Used to control supply locator flexfield | ||
| RESTRICT_LOCATORS_FLAG | VARCHAR2 | (1) | Used to control Supply Locator flexfield | |
| RESTRICT_SUBINVENTORIES_FLAG | VARCHAR2 | (1) | Used to control Subinventory LOV | |
| INVENTORY_ASSET_FLAG | VARCHAR2 | (1) | Y | Flag indicating item is an inventory asset |
| SHIPPABLE_ITEM_FLAG | VARCHAR2 | (1) | Y | Flag indicating shippable item |
| REVISION | VARCHAR2 | (3) | Y | Current item revision of component |
| ITEM_TYPE_NAME | VARCHAR2 | (80) | QuickCode meaning | |
| ACD_TYPE_NAME | VARCHAR2 | (80) | Y | Meaning of Add, Change or Disable code |
| SUPPLY_TYPE | VARCHAR2 | (80) | Meaning of Supply Type code | |
| BASIS_TYPE | NUMBER | |||
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | To End Item Unit Number |
APPS.BOM_INV_COMPS_INTERFACE_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Item identifier | |
| CURRENT_REVISION | VARCHAR2 | (3) | Y | Current implemented item revision |
| EFFECTIVITY_DATE | DATE | Y | Effective date | |
| REVISION_LABEL | VARCHAR2 | (80) | Revision Label | |
| REVISION_ID | NUMBER | Y |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Item identifier | |
| REVISION | VARCHAR2 | (3) | Y | Item revision |
| EFFECTIVITY_DATE | VARCHAR2 | (20) | Effective date | |
| HIGH_DATE | VARCHAR2 | (19) | Date upto which revision is valid | |
| IMPLEMENTATION_DATE | VARCHAR2 | (19) | Date revision is implemented | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| REVISED_ITEM_ID | NUMBER | Revised item identifier | ||
| REVISED_ITEM_STATUS | NUMBER | Status of item on ECO |
APPS.BOM_ITEM_REVISIONS_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LINE_ID | NUMBER | Y | System-generated identifier of order, configuration or shipment schedule line | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent program that last changed line | ||
| PROGRAM_ID | NUMBER | Standard Who column x | ||
| PROGRAM_UPDATE_DATE | DATE | Last date changed by concurrent program | ||
| SOURCE_LINE_ID | NUMBER | Identifier of shipment schedule parent option line from which shipment schedule line is copied | ||
| ORIGINAL_SYSTEM_LINE_REFERENCE | VARCHAR2 | (50) | Identifier of a line from a source system outside of Oracle Order Entry | |
| HEADER_ID | NUMBER | Y | System-generated identifier of order header | |
| SHIPMENT_SCHEDULE_LINE_ID | NUMBER | Identifier of shipment schedule parent line | ||
| PARENT_LINE_ID | NUMBER | Identifier of configuration top parent line | ||
| ATO_LINE_ID | NUMBER | Identifier of ATO configuration top model line | ||
| LINK_TO_LINE_ID | NUMBER | Identifier of immediate parent component line | ||
| SERVICE_PARENT_LINE_ID | NUMBER | (for internal use only) | ||
| LINE_TYPE_CODE | VARCHAR2 | (30) | Y | Indicates if line is part of a shipment schedule, top shipment schedule line, regular or return line |
| OPTION_FLAG | VARCHAR2 | (1) | Y | Indicates if line is an option in a configuration |
| OPEN_FLAG | VARCHAR2 | (1) | Indicates if line has completed the order cycle. | |
| CYCLE_ID | NUMBER | System-generated identifier of order cycle | ||
| LINE_NUMBER | NUMBER | Line sequence number | ||
| INVENTORY_ITEM_ID | NUMBER | Y | System-generated identifier of inventory item | |
| COMPONENT_SEQUENCE_ID | NUMBER | Component identifier | ||
| ITEM_TYPE_CODE | VARCHAR2 | (30) | Y | Type of item |
| ATO_FLAG | VARCHAR2 | (1) | Y | Indicates if line is ATO |
| SHIP_MODEL_COMPLETE_FLAG | VARCHAR2 | (1) | Indicates if line is in a ship-complete configuration | |
| COMPONENT_CODE | VARCHAR2 | (1000) | Identifier of component within an exploded bill | |
| COMPONENT_SORT_CODE | VARCHAR2 | (240) | Sorting sequence for a component within a bill | |
| STANDARD_COMPONENT_FREEZE_DATE | DATE | Date when included item are frozen | ||
| CONFIGURATION_EDITED_FLAG | VARCHAR2 | (1) | Not used | |
| ORDERED_QUANTITY | NUMBER | Quantity ordered | ||
| CANCELLED_QUANTITY | NUMBER | Quantity cancelled | ||
| UNIT_CODE | VARCHAR2 | (3) | Unit of measure | |
| PRICE_LIST_ID | NUMBER | System-generated identifier of price list | ||
| PRICING_METHOD_CODE | VARCHAR2 | (30) | Method used to calculate price | |
| LIST_PRICE | NUMBER | Price list price of item | ||
| SELLING_PRICE | NUMBER | Actual price charged to customer | ||
| LIST_PERCENT | NUMBER | Price list percent of the item | ||
| SELLING_PERCENT | NUMBER | Percent actually charged to customer | ||
| PERCENT_BASE_PRICE | NUMBER | Base price used for percent-based pricing | ||
| PRICING_CONTEXT | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| PRICING_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRICING_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| PRICING_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRICING_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRICING_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRICING_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRICING_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRICING_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRICING_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRICING_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRICING_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRICING_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRICING_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRICING_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRICING_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| WAREHOUSE_ID | NUMBER | System-generated identifier of inventory organization | ||
| DEMAND_CLASS_CODE | VARCHAR2 | (30) | Demand class | |
| SCHEDULE_DATE | DATE | Date planned to ship item | ||
| SHIP_SET_NUMBER | NUMBER | Ship set number | ||
| SHIPPED_QUANTITY | NUMBER | Quantity shipped on line | ||
| DATE_REQUESTED_CURRENT | DATE | Date requested by customer to receive item | ||
| PROMISE_DATE | DATE | Date promised to customer to receive item | ||
| SHIP_TO_SITE_USE_ID | NUMBER | Location to which line is to be shipped | ||
| SHIP_TO_CONTACT_ID | NUMBER | Person to which line is to be shipped | ||
| SHIPMENT_PRIORITY_CODE | VARCHAR2 | (30) | Shipment priority | |
| SHIP_METHOD_CODE | VARCHAR2 | (30) | Freight carrier | |
| AGREEMENT_ID | NUMBER | (For internal use) | ||
| COMMITMENT_ID | NUMBER | Commitment to apply line against | ||
| TERMS_ID | NUMBER | System-generated identifier of payment terms | ||
| INVOICING_RULE_ID | NUMBER | Invoicing rule | ||
| ACCOUNTING_RULE_ID | NUMBER | Accouting rule | ||
| INVOICE_COUNT | NUMBER | Number of times line has been incrementally billed | ||
| INVOICED_QUANTITY | NUMBER | Quantity invoiced | ||
| QUANTITY_TO_INVOICE | NUMBER | Current quantity outstanding to be invoiced | ||
| REVENUE_AMOUNT | NUMBER | Unit price to invoice | ||
| TAX_EXEMPT_NUMBER | VARCHAR2 | (80) | Tax exemption certificate number | |
| TAX_EXEMPT_REASON_CODE | VARCHAR2 | (30) | Tax exemption reason | |
| TRANSACTION_TYPE_CODE | VARCHAR2 | (30) | For internal use only | |
| TRANSACTION_REASON_CODE | VARCHAR2 | (30) | Reason for return of item | |
| TRANSACTION_COMMENTS | VARCHAR2 | (240) | For internal use only | |
| RETURN_REFERENCE_TYPE_CODE | VARCHAR2 | (30) | Type of line to which return line is related | |
| RETURN_REFERENCE_ID | NUMBER | Order line or invoice line to which return line is related | ||
| CREDIT_INVOICE_LINE_ID | NUMBER | Credit invoice line of return | ||
| INSPECTION_REQUIRED_FLAG | VARCHAR2 | (1) | Inspection required indicator for RMA | |
| CUSTOMER_PRODUCT_ID | NUMBER | For internal use only | ||
| CP_SERVICE_ID | NUMBER | For internal use only | ||
| SERVICED_QUANTITY | NUMBER | For internal use only | ||
| SERVICE_DURATION | NUMBER | For internal use only | ||
| SERVICE_START_DATE | DATE | For internal use only | ||
| SERVICE_END_DATE | DATE | For internal use only | ||
| SERVICE_COTERMINATE_FLAG | VARCHAR2 | (1) | For internal use only | |
| SERVICE_PERIOD_CONVERSION_RATE | NUMBER | For internal use only | ||
| SERVICE_MASS_TXN_TEMP_ID | NUMBER | For internal use only | ||
| NUMBER_SVRID | NUMBER | Standard value rule from which line number is derived | ||
| ITEM_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| ORDERED_QUANTITY_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| UNIT_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| PRICING_ATTRIBUTES_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| LIST_PRICE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| SELLING_PRICE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| LIST_PERCENT_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| SELLING_PERCENT_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| WAREHOUSE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| DEMAND_CLASS_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| SHIP_SET_NUMBER_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| REQUEST_DATE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| PROMISE_DATE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| SCHEDULE_DATE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| SHIP_TO_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| SHIP_TO_CONTACT_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| SHIPMENT_PRIORITY_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| FREIGHT_CARRIER_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| AGREEMENT_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| COMMITMENT_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| PAYMENT_TERMS_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| INVOICING_RULE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| ACCOUNTING_RULE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| TAX_EXEMPT_NUMBER_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| TAX_EXEMPT_REASON_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| TRANSACTION_TYPE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| TRANSACTION_REASON_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| TRANSACTION_COMMENTS_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| RETURN_REFERENCE_TYPE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| RETURN_REFERENCE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| CREDIT_INVOICE_LINE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| INSPECTION_REQUIRED_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| CUSTOMER_PRODUCT_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| CUSTOMER_PRODUCT_SERVICE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| SERVICE_DURATION_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| SERVICE_START_DATE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| SERVICE_END_DATE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| SERVICE_PER_CONV_RATE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| SERVICE_COTERMINATE_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| DF_SVRID | NUMBER | Standard value rule from which attribute is derived | ||
| S1 | NUMBER | Cycle action status column | ||
| S1_DATE | DATE | Cycle action status date column | ||
| S2 | NUMBER | Cycle action status column | ||
| S2_DATE | DATE | Cycle action status date column | ||
| S3 | NUMBER | Cycle action status column | ||
| S3_DATE | DATE | Cycle action status date column | ||
| S4 | NUMBER | Cycle action status column | ||
| S4_DATE | DATE | Cycle action status date column | ||
| S5 | NUMBER | Cycle action status column | ||
| S5_DATE | DATE | Cycle action status date column | ||
| S6 | NUMBER | Cycle action status column | ||
| S6_DATE | DATE | Cycle action status date column | ||
| S7 | NUMBER | Cycle action status column | ||
| S7_DATE | DATE | Cycle action status date column | ||
| S8 | NUMBER | Cycle action status column | ||
| S8_DATE | DATE | Cycle action status date column | ||
| S9 | NUMBER | Cycle action status column | ||
| S9_DATE | DATE | Cycle action status date column | ||
| S10 | NUMBER | Cycle action status column | ||
| S10_DATE | DATE | Cycle action status date column | ||
| S11 | NUMBER | Cycle action status column | ||
| S11_DATE | DATE | Cycle action status date column | ||
| S12 | NUMBER | Cycle action status column | ||
| S12_DATE | DATE | Cycle action status date column | ||
| S13 | NUMBER | Cycle action status column | ||
| S13_DATE | DATE | Cycle action status date column | ||
| S14 | NUMBER | Cycle action status column | ||
| S14_DATE | DATE | Cycle action status date column | ||
| S15 | NUMBER | Cycle action status column | ||
| S15_DATE | DATE | Cycle action status date column | ||
| S16 | NUMBER | Cycle action status column | ||
| S16_DATE | DATE | Cycle action status date column | ||
| S17 | NUMBER | Cycle action status column | ||
| S17_DATE | DATE | Cycle action status date column | ||
| S18 | NUMBER | Cycle action status column | ||
| S18_DATE | DATE | Cycle action status date column | ||
| S19 | NUMBER | Cycle action status column | ||
| S19_DATE | DATE | Cycle action status date column | ||
| S20 | NUMBER | Cycle action status column | ||
| S20_DATE | DATE | Cycle action status date column | ||
| S21 | NUMBER | Cycle action status column | ||
| S21_DATE | DATE | Cycle action status date column | ||
| S22 | NUMBER | Cycle action status column | ||
| S22_DATE | DATE | Cycle action status date column | ||
| S23 | NUMBER | Cycle action status column | ||
| S23_DATE | DATE | Cycle action status date column | ||
| S24 | NUMBER | Cycle action status column | ||
| S24_DATE | DATE | Cycle action status date column | ||
| S25 | NUMBER | Cycle action status column | ||
| S25_DATE | DATE | Cycle action status date column | ||
| S26 | NUMBER | Cycle action status column | ||
| S26_DATE | DATE | Cycle action status date column | ||
| S27 | NUMBER | Cycle action status column | ||
| S27_DATE | DATE | Cycle action status date column | ||
| S28 | NUMBER | Cycle action status column | ||
| S28_DATE | DATE | Cycle action status date column | ||
| S29 | NUMBER | Cycle action status column | ||
| S29_DATE | DATE | Cycle action status date column | ||
| S30 | NUMBER | Cycle action status column | ||
| S30_DATE | DATE | Cycle action status date column | ||
| CONTEXT | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PRICING_DATE | DATE | Date on which list price or percent is based | ||
| LATEST_ACCEPTABLE_DATE | DATE | |||
| LATEST_ACCEPTABLE_DATE_SVRID | NUMBER |
APPS.BOM_LINES_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LINE_DETAIL_ID | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| LINE_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Item identifier | |
| INCLUDED_ITEM_FLAG | VARCHAR2 | (1) | Y | |
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| COMPONENT_CODE | VARCHAR2 | (1000) | Y | |
| COMPONENT_RATIO | NUMBER | Y | ||
| SHIPPABLE_FLAG | VARCHAR2 | (1) | ||
| TRANSACTABLE_FLAG | VARCHAR2 | (1) | ||
| RESERVABLE_FLAG | VARCHAR2 | (1) | ||
| RELEASED_FLAG | VARCHAR2 | (1) | Y | |
| QUANTITY | NUMBER | Y | Quantity | |
| WAREHOUSE_ID | NUMBER | |||
| DEMAND_CLASS_CODE | VARCHAR2 | (30) | ||
| SCHEDULE_DATE | DATE | |||
| REVISION | VARCHAR2 | (3) | ||
| LOT_NUMBER | VARCHAR2 | (30) | Lot | |
| SUBINVENTORY | VARCHAR2 | (10) | subinventory | |
| CUSTOMER_REQUESTED_LOT_FLAG | VARCHAR2 | (1) | Indicator whether customer requested lot | |
| SCHEDULE_STATUS_CODE | VARCHAR2 | (30) | ||
| SCHEDULE_LEVEL_CODE | NUMBER | |||
| CONTEXT | VARCHAR2 | (30) | ||
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
APPS.BOM_LINE_DETAILS_VIEW is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| MIXED_MODEL_MAP_ID | NUMBER | Y | Mixed Model Map identifier | |
| GROUP_NUMBER | NUMBER | Y | Each Mixed Model Map's Processes are grouped together in sets of 5. This group number represents which set the Process is in. | |
| PRODUCT_ITEM_ID | NUMBER | Y | Product item identifier | |
| DEMAND | NUMBER | Y | Amount of demand for the Product | |
| MACHINE_TIME1 | NUMBER | Machine Time for the first process | ||
| MACHINE_TIME2 | NUMBER | Machine Time for the second process | ||
| MACHINE_TIME3 | NUMBER | Machine Time for the third process | ||
| MACHINE_TIME4 | NUMBER | Machine Time for the fourth process | ||
| MACHINE_TIME5 | NUMBER | Machine Time for the fifth process | ||
| LABOR_TIME1 | NUMBER | Labor Time for the first process | ||
| LABOR_TIME2 | NUMBER | Labor Time for the second process | ||
| LABOR_TIME3 | NUMBER | Labor Time for the third process | ||
| LABOR_TIME4 | NUMBER | Labor Time for the fourth process | ||
| LABOR_TIME5 | NUMBER | Labor Time for the fifth process | ||
| TOTAL_TIME1 | NUMBER | Total Time for the first process | ||
| TOTAL_TIME2 | NUMBER | Total Time for the second process | ||
| TOTAL_TIME3 | NUMBER | Total Time for the third process | ||
| TOTAL_TIME4 | NUMBER | Total Time for the fourth process | ||
| TOTAL_TIME5 | NUMBER | Total Time for the fifth process | ||
| PROCESS_VOLUME1 | NUMBER | Process Volume for the first process | ||
| PROCESS_VOLUME2 | NUMBER | Process Volume for the second process | ||
| PROCESS_VOLUME3 | NUMBER | Process Volume for the third process | ||
| PROCESS_VOLUME4 | NUMBER | Process Volume for the fourth process | ||
| PROCESS_VOLUME5 | NUMBER | Process Volume for the fifth process |
APPS.BOM_MIXED_MODEL_MAP_CELLS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| MIXED_MODEL_MAP_ID | NUMBER | Y | Mixed Model Map identifier | |
| GROUP_NUMBER | NUMBER | Y | Each Mixed Model Map's Processes are grouped together in sets of 5. This group number represents which set the Process is in. | |
| OPERATION_CODE1 | VARCHAR2 | (4) | Y | Process or Line Op name shown in the first column of the map |
| OPERATION_CODE2 | VARCHAR2 | (4) | Process or Line Op name shown in the second column of the map | |
| OPERATION_CODE3 | VARCHAR2 | (4) | Process or Line Op name shown in the third column of the map | |
| OPERATION_CODE4 | VARCHAR2 | (4) | Process or Line Op name shown in the fourth column of the map | |
| OPERATION_CODE5 | VARCHAR2 | (4) | Process or Line Op name shown in the fifth column of the map | |
| MACHINE_WEIGHTED_TIME1 | NUMBER | Weighted machine time for the first process | ||
| MACHINE_WEIGHTED_TIME2 | NUMBER | Weighted machine time for the second process | ||
| MACHINE_WEIGHTED_TIME3 | NUMBER | Weighted machine time for the third process | ||
| MACHINE_WEIGHTED_TIME4 | NUMBER | Weighted machine time for the fourth process | ||
| MACHINE_WEIGHTED_TIME5 | NUMBER | Weighted machine time for the fifth process | ||
| LABOR_WEIGHTED_TIME1 | NUMBER | Weighted labor time for the first process | ||
| LABOR_WEIGHTED_TIME2 | NUMBER | Weighted labor time for the second process | ||
| LABOR_WEIGHTED_TIME3 | NUMBER | Weighted labor time for the third process | ||
| LABOR_WEIGHTED_TIME4 | NUMBER | Weighted labor time for the fourth process | ||
| LABOR_WEIGHTED_TIME5 | NUMBER | Weighted labor time for the fifth process | ||
| TOTAL_WEIGHTED_TIME1 | NUMBER | Weighted total time for the first process | ||
| TOTAL_WEIGHTED_TIME2 | NUMBER | Weighted total time for the second process | ||
| TOTAL_WEIGHTED_TIME3 | NUMBER | Weighted total time for the third process | ||
| TOTAL_WEIGHTED_TIME4 | NUMBER | Weighted total time for the fourth process | ||
| TOTAL_WEIGHTED_TIME5 | NUMBER | Weighted total time for the fifth process | ||
| MACHINES_NEEDED1 | NUMBER | Number of machines needed for the first process | ||
| MACHINES_NEEDED2 | NUMBER | Number of machines needed for the second process | ||
| MACHINES_NEEDED3 | NUMBER | Number of machines needed for the third process | ||
| MACHINES_NEEDED4 | NUMBER | Number of machines needed for the fourth process | ||
| MACHINES_NEEDED5 | NUMBER | Number of machines needed for the fifth process | ||
| MACHINES_ASSIGNED1 | NUMBER | Number of machines assigned for the first process | ||
| MACHINES_ASSIGNED2 | NUMBER | Number of machines assigned for the second process | ||
| MACHINES_ASSIGNED3 | NUMBER | Number of machines assigned for the third process | ||
| MACHINES_ASSIGNED4 | NUMBER | Number of machines assigned for the fourth process | ||
| MACHINES_ASSIGNED5 | NUMBER | Number of machines assigned for the fifth process | ||
| LABOR_NEEDED1 | NUMBER | Number of labor resources needed for the first process | ||
| LABOR_NEEDED2 | NUMBER | Number of labor resources needed for the second process | ||
| LABOR_NEEDED3 | NUMBER | Number of labor resources needed for the third process | ||
| LABOR_NEEDED4 | NUMBER | Number of labor resources needed for the fourth process | ||
| LABOR_NEEDED5 | NUMBER | Number of labor resources needed for the fifth process | ||
| LABOR_ASSIGNED1 | NUMBER | Number of labor resources assigned for the first process | ||
| LABOR_ASSIGNED2 | NUMBER | Number of labor resources assigned for the second process | ||
| LABOR_ASSIGNED3 | NUMBER | Number of labor resources assigned for the third process | ||
| LABOR_ASSIGNED4 | NUMBER | Number of labor resources assigned for the fourth process | ||
| LABOR_ASSIGNED5 | NUMBER | Number of labor resources assigned for the fifth process | ||
| TAKT_TIME1 | NUMBER | TAKT time for the first process | ||
| TAKT_TIME2 | NUMBER | TAKT time for the second process | ||
| TAKT_TIME3 | NUMBER | TAKT time for the third process | ||
| TAKT_TIME4 | NUMBER | TAKT time for the fourth process | ||
| TAKT_TIME5 | NUMBER | TAKT time for the fifth process | ||
| TAKT_TIME_FOR_ASSIGNED1 | NUMBER | TAKT time from assigned labor or machines for the first process | ||
| TAKT_TIME_FOR_ASSIGNED2 | NUMBER | TAKT time from assigned labor or machines for the second process | ||
| TAKT_TIME_FOR_ASSIGNED3 | NUMBER | TAKT time from assigned labor or machines for the third process | ||
| TAKT_TIME_FOR_ASSIGNED4 | NUMBER | TAKT time from assigned labor or machines for the fourth process | ||
| TAKT_TIME_FOR_ASSIGNED5 | NUMBER | TAKT time from assigned labor or machines for the fifth process | ||
| IN_PROCESS_KANBAN1 | NUMBER | IPKs Needed for the first process | ||
| IN_PROCESS_KANBAN2 | NUMBER | IPKs Needed for the second process | ||
| IN_PROCESS_KANBAN3 | NUMBER | IPKs Needed for the third process | ||
| IN_PROCESS_KANBAN4 | NUMBER | IPKs Needed for the fourth process | ||
| IN_PROCESS_KANBAN5 | NUMBER | IPKs Needed for the fifth process | ||
| MACHINES_NEEDED_DELTA1 | NUMBER | Machines needed delta value between the current map and the baseline map for the first process | ||
| MACHINES_NEEDED_DELTA2 | NUMBER | Machines needed delta value between the current map and the baseline map for the second process | ||
| MACHINES_NEEDED_DELTA3 | NUMBER | Machines needed delta value between the current map and the baseline map for the third process | ||
| MACHINES_NEEDED_DELTA4 | NUMBER | Machines needed delta value between the current map and the baseline map for the fourth process | ||
| MACHINES_NEEDED_DELTA5 | NUMBER | Machines needed delta value between the current map and the baseline map for the fifth process | ||
| LABOR_NEEDED_DELTA1 | NUMBER | Labor needed delta value between the current map and the baseline map for the first process | ||
| LABOR_NEEDED_DELTA2 | NUMBER | Labor needed delta value between the current map and the baseline map for the second process | ||
| LABOR_NEEDED_DELTA3 | NUMBER | Labor needed delta value between the current map and the baseline map for the third process | ||
| LABOR_NEEDED_DELTA4 | NUMBER | Labor needed delta value between the current map and the baseline map for the fourth process | ||
| LABOR_NEEDED_DELTA5 | NUMBER | Labor needed delta value between the current map and the baseline map for the fifth process | ||
| IN_PROCESS_KANBAN_DELTA1 | NUMBER | IPKs needed delta value between the current map and the baseline map for the first process | ||
| IN_PROCESS_KANBAN_DELTA2 | NUMBER | IPKs needed delta value between the current map and the baseline map for the second process | ||
| IN_PROCESS_KANBAN_DELTA3 | NUMBER | IPKs needed delta value between the current map and the baseline map for the second process | ||
| IN_PROCESS_KANBAN_DELTA4 | NUMBER | IPKs needed delta value between the current map and the baseline map for the fourth process | ||
| IN_PROCESS_KANBAN_DELTA5 | NUMBER | IPKs needed delta value between the current map and the baseline map for the fifth process |
APPS.BOM_MIXED_MODEL_MAP_PROC_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| MIXED_MODEL_MAP_ID | NUMBER | Y | Mixed model map unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resouce identifier | |
| RESOURCE_CODE | VARCHAR2 | (10) | Resource code | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| ACTIVITY | VARCHAR2 | (10) | Activity name | |
| STANDARD_OPERATION_ID | NUMBER | Standard operation identifier | ||
| OPERATION_CODE | VARCHAR2 | (4) | Operation code | |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| RESOURCE_TYPE | NUMBER | Rsource type | ||
| RESOURCE_TYPE_DISP | VARCHAR2 | (80) | Lookup meaning | |
| RESOURCE_NEEDED | NUMBER | Resource needed for the operation |
APPS.BOM_MIXED_MODEL_MAP_RES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Rowid of table BOM_OPERATIONAL_ROUTINGS | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization Identifier | |
| ORGANIZATION_NAME | VARCHAR2 | (240) | Organization Name | |
| ITEM_CATEGORY | VARCHAR2 | (0) | Item Category | |
| ASSEMBLY_ITEM | VARCHAR2 | (40) | Assembly Item Name | |
| ASSEMBLY_ITEM_DESCRIPTION | VARCHAR2 | (240) | Assembly Item Description | |
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | Primary Unit Of Measure | |
| ALTERNATE_ROUTING_DESIGNATOR | VARCHAR2 | (10) | Alternate Routing Designator | |
| CURRENT_REVISION | VARCHAR2 | (3) | Y | Revision Code of Current Revision |
| PRIORITY | NUMBER | Priority | ||
| PRODUCT_FAMILY | VARCHAR2 | (40) | Name of Product Family | |
| SERIALIZATION_START_OP | NUMBER | Serialization Start Operation | ||
| COMPLETION_SUBINVENTORY | VARCHAR2 | (10) | Completion Sub-Inventory | |
| COMPLETION_LOCATOR | VARCHAR2 | (1) | Completion Locator | |
| ROUTING_COMMENT | VARCHAR2 | (240) | Routing Comments | |
| COMMON_ROUTING_ITEM | VARCHAR2 | (40) | Name of Item whose routing we are referencing | |
| COMMON_ROUTING_ITEM_DESC | VARCHAR2 | (240) | Description of Item whose routing we are referencing | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ASSEMBLY_ITEM_ID | NUMBER | Y | Assembly Item Id | |
| ROUTING_SEQUENCE_ID | NUMBER | Y | Unique Id for Routing | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ROUTING_TYPE | NUMBER | Y | Type Of Routing | |
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | Id of Item whose routing we are referencing | ||
| COMMON_ROUTING_SEQUENCE_ID | NUMBER | Y | Routing Id of Item whose routing we are referencing | |
| SUB_LOCATOR_CONTROL | NUMBER | Locator Control Information | ||
| COMPLETION_LOCATOR_ID | NUMBER | Locator Identifier | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| LINE_ID | NUMBER | WIP Line Identifier | ||
| LINE_CODE | VARCHAR2 | (10) | WIP Line Code | |
| CFM_ROUTING_FLAG | NUMBER | CFM Routing flag | ||
| MIXED_MODEL_MAP_FLAG | NUMBER | Mixed Model Map Flag | ||
| PRODUCT_FAMILY_ITEM_ID | NUMBER | Product Family Identifier | ||
| PRODUCT_ITEM_NUMBER | VARCHAR2 | (40) | Product Item Number | |
| CTP_FLAG | NUMBER | CTP Flag | ||
| TOTAL_PRODUCT_CYCLE_TIME | NUMBER | total Product Cycle time | ||
| PENDING_FROM_ECN | VARCHAR2 | (10) | ECO Attribute | |
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original System Reference | |
| EAM_ITEM_TYPE | NUMBER | EAM Item Type |
APPS.BOM_OPERATIONAL_ROUTINGS_ERV is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Rowid of table BOM_OPERATIONAL_ROUTINGS | |
| ROUTING_SEQUENCE_ID | NUMBER | Y | Routing unique identifier | |
| ASSEMBLY_ITEM_ID | NUMBER | Y | Inventory item identifier of manufactured assembly | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ALTERNATE_ROUTING_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| ROUTING_TYPE | NUMBER | Y | 2=Engineering routing 1=Manufacturing routing | |
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | Inventory item identifier of common assembly | ||
| COMMON_ROUTING_SEQUENCE_ID | NUMBER | Y | Routing identifier of common routing | |
| ROUTING_COMMENT | VARCHAR2 | (240) | Routing specific comment | |
| COMPLETION_SUBINVENTORY | VARCHAR2 | (10) | Completion subinventory | |
| SUB_LOCATOR_CONTROL | NUMBER | Used to control behavior of Locator flex field | ||
| COMPLETION_LOCATOR_ID | NUMBER | Completion locator identifier | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| LINE_ID | NUMBER | Unique identifier from WIP Lines. Used in Flow Manufacturing. | ||
| LINE_CODE | VARCHAR2 | (10) | WIP Line code. Used in Flow Manufacturing. | |
| CFM_ROUTING_FLAG | NUMBER | Continous Flow or Traditional routing | ||
| MIXED_MODEL_MAP_FLAG | NUMBER | Use this routing in Mixed Model Map calculation | ||
| PRIORITY | NUMBER | For Information Only | ||
| PRODUCT_FAMILY_ITEM_ID | NUMBER | Product Family item identifier | ||
| PRODUCT_FAMILY_ITEM | VARCHAR2 | (40) | Product Family item code | |
| CTP_FLAG | NUMBER | Capable to Promise. Flag indicating capacity must be checked when item is ordered | ||
| TOTAL_PRODUCT_CYCLE_TIME | NUMBER | Total time that an assembly takes along the primary path in the operation network. Calculated by Flow Manufacturing. | ||
| PENDING_FROM_ECN | VARCHAR2 | (10) | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | ||
| EAM_ITEM_TYPE | NUMBER | |||
| SERIALIZATION_START_OP | NUMBER | |||
| DESCRIPTION | VARCHAR2 | (240) | ||
| UOM | VARCHAR2 | (3) |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Rowid of table BOM_OPERATION_NETWORKS | |
| ROUTING_SEQUENCE_ID | NUMBER | Y | Routing unique identifier | |
| FROM_OP_SEQ_ID | NUMBER | Y | From routing operation identifier | |
| FROM_SEQ_NUM | NUMBER | Y | From routing operation sequence number | |
| FROM_OPERATION_CODE | VARCHAR2 | (4) | From routing operation code | |
| FROM_EFFECTIVITY_DATE | DATE | Y | Effective Date of the From operation | |
| FROM_OPERATION_DESC | VARCHAR2 | (240) | From routing operation code | |
| FROM_DEPT_CODE | VARCHAR2 | (10) | Y | From routing operation code |
| TO_OP_SEQ_ID | NUMBER | Y | To routing operation identifier | |
| TO_SEQ_NUM | NUMBER | Y | To routing operation sequence number | |
| TO_OPERATION_CODE | VARCHAR2 | (4) | To routing operation code | |
| TO_EFFECTIVITY_DATE | DATE | Y | Effective Date of the To operation | |
| TO_OPERATION_DESC | VARCHAR2 | (240) | From routing operation code | |
| TO_DEPT_CODE | VARCHAR2 | (10) | Y | From routing operation code |
| TRANSITION_TYPE | NUMBER | Primary, Alternate or Rework connection | ||
| PLANNING_PCT | NUMBER | Planning Percentage | ||
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| OPERATION_TYPE | NUMBER | Process, Line Operation or Event | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Rowid of table BOM_OPERATION_RESOURCES | |
| OPERATION_SEQUENCE_ID | NUMBER | Routing operation unique identifier | ||
| RESOURCE_SEQ_NUM | NUMBER | Resource sequence number | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Resource code | |
| UOM | VARCHAR2 | (3) | Unit of measure | |
| RESOURCE_ID | NUMBER | Resource unique identifier | ||
| ACTIVITY | VARCHAR2 | (10) | Activity name | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| STANDARD_RATE_FLAG | NUMBER | Use standard rate for shopfloor transactions | ||
| ASSIGNED_UNITS | NUMBER | Resource units assigned | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Resource usage rate | ||
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Resource usage rate inverse | ||
| BASIS_TYPE | NUMBER | Basis type identifier | ||
| SCHEDULE_FLAG | NUMBER | Schedule the resource | ||
| AVAILABLE_24_HOURS_FLAG | NUMBER | Resource is available 24 hours or by shifts | ||
| LAST_UPDATE_DATE | DATE | Standard who column | ||
| LAST_UPDATED_BY | NUMBER | Standard who column | ||
| CREATION_DATE | DATE | Standard who column | ||
| CREATED_BY | NUMBER | Standard who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| RESOURCE_OFFSET_PERCENT | NUMBER | Resource offset percent from the start of the routing | ||
| AUTOCHARGE_TYPE | NUMBER | Autocharge type for shopfloor moves | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| SCHEDULE_SEQ_NUM | NUMBER | Scheduling Sequence number | ||
| SUBSTITUTE_GROUP_NUM | NUMBER | |||
| PRINCIPLE_FLAG | NUMBER | |||
| SETUP_ID | NUMBER | Setup Id | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Change Notice | |
| ACD_TYPE | NUMBER | Acd Type | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original System Reference | |
| SETUP_CODE | VARCHAR2 | (10) | Setup Code |
APPS.BOM_OPERATION_RESOURCES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Rowid of table BOM_OPERATION_SEQUENCES | |
| OPERATION_SEQUENCE_ID | NUMBER | Y | Routing operation unique identifier | |
| ROUTING_SEQUENCE_ID | NUMBER | Y | Routing unique identifier | |
| OPERATION_SEQ_NUM | NUMBER | Y | Operation sequence number | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| STANDARD_OPERATION_CODE | VARCHAR2 | (4) | Standard operation code | |
| STANDARD_OPERATION_ID | NUMBER | Standard operation unique identifier | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | Department code |
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| LOCATION_ID | NUMBER | Location identifier | ||
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Operation lead time offset percentage | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | Minimum operation transfer quantity | ||
| COUNT_POINT_TYPE | NUMBER | Y | Count point | |
| OPERATION_DESCRIPTION | VARCHAR2 | (240) | Operation description | |
| EFFECTIVITY_DATE | DATE | Y | Effective date | |
| DISABLE_DATE | DATE | Disable date | ||
| BACKFLUSH_FLAG | NUMBER | Y | Indicates whether operation requires backflushing | |
| OPTION_DEPENDENT_FLAG | NUMBER | Y | Indicates whether to use this operation in all configuration routings, even if no components of the configuration are used in this operation | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| COUNT_POINT_FLAG | NUMBER | Derived from Count Point Type (Count Point, Yes or No) | ||
| AUTOCHARGE_FLAG | NUMBER | Derived from Count Point Type (Autocharge, Yes or No) | ||
| OPERATION_TYPE | NUMBER | Process, Line Operation or Event | ||
| REFERENCE_FLAG | NUMBER | Is Standard Operation referenced or copied. If referenced, operation can not be updated. | ||
| PROCESS_OP_SEQ_ID | NUMBER | Operation sequence id of parent process (applies only to Events). | ||
| PROCESS_SEQ_NUM | NUMBER | Operation sequence number of parent process (applies only to Events). | ||
| PROCESS_CODE | VARCHAR2 | (4) | Operation sequence code of parent process (applies only to Events). | |
| LINE_OP_SEQ_ID | NUMBER | Operation sequence id of the parent Line Operation (applies only to Events). | ||
| LINE_OP_SEQ_NUM | NUMBER | Operation sequence number of the parent Line Operation (applies only to Events). | ||
| LINE_OP_CODE | VARCHAR2 | (4) | Operation sequence code of the parent Line Operation (applies only to Events). | |
| YIELD | NUMBER | Process yield at this operation. | ||
| CUMULATIVE_YIELD | NUMBER | Cumulative process yield from begining of routing to this operation. | ||
| REVERSE_CUMULATIVE_YIELD | NUMBER | Cumulative process yield from end of routing to comparable operation. For example, if this is the second operation out of 10 operations, the reversecumulative yield would be the total yield from the tenth down to the ninth operation. | ||
| LABOR_TIME_CALC | NUMBER | System calculated run time attributable to labor. | ||
| MACHINE_TIME_CALC | NUMBER | System calculated run time attributable to machines. | ||
| TOTAL_TIME_CALC | NUMBER | System calculated run time attributable to both labor and machines. | ||
| LABOR_TIME_USER | NUMBER | User calculated run time attributable to labor. | ||
| MACHINE_TIME_USER | NUMBER | User calculated run time attributable to machines. | ||
| TOTAL_TIME_USER | NUMBER | User calculated run time attributable to both labor and machines. | ||
| NET_PLANNING_PERCENT | NUMBER | Cumulative planning percents derived from the operation network. | ||
| INCLUDE_IN_ROLLUP | NUMBER | Indicates whether operation yield is to be considered in cost rollup | ||
| OPERATION_YIELD_ENABLED | NUMBER | Indicates whether operation yield is to be considered during costing. | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Change Notice | |
| IMPLEMENTATION_DATE | DATE | Implementation Date | ||
| IMPL_CB | NUMBER | Implementation Flag | ||
| OLD_OPERATION_SEQUENCE_ID | NUMBER | Old Operation Sequence Id | ||
| ACD_TYPE | NUMBER | Acd Type | ||
| REVISED_ITEM_SEQUENCE_ID | NUMBER | Revised Item Sequence Id | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original System Reference | |
| ECO_FOR_PRODUCTION | NUMBER | |||
| SHUTDOWN_TYPE | VARCHAR2 | (30) | ||
| SHUTDOWN_TYPE_VALUE | VARCHAR2 | (80) | ||
| MACHINE_PROCESS_EFFICIENCY | NUMBER | Used by Flow manufacturing for Process Efficiency calculations | ||
| LABOR_PROCESS_EFFICIENCY | NUMBER | Used by Flow manufacturing for Process Efficiency calculations | ||
| TOTAL_PROCESS_EFFICIENCY | NUMBER | Used by Flow manufacturing for Process Efficiency calculations | ||
| CRITICAL_TO_QUALITY | VARCHAR2 | (1) | Used by Flow manufacturing | |
| VALUE_ADDED | VARCHAR2 | (1) | Used by Flow manufacturing | |
| LONG_DESCRIPTION | VARCHAR2 | (4000) | Used by EAM routings | |
| CONFIG_ROUTING_ID | NUMBER | this columns denotes the corresponding model routing that this configuration routing operation is derrived from | ||
| MODEL_OP_SEQ_ID | NUMBER | this columns denotes the corresponding model routing operation that this configuration routing operation is derrived from | ||
| LOWEST_ACCEPTABLE_YIELD | NUMBER | Lowest Accpetable Yield | ||
| USE_ORG_SETTINGS | NUMBER | Use Org Settings | ||
| QUEUE_MANDATORY_FLAG | NUMBER | Queue Mandatory Flag | ||
| RUN_MANDATORY_FLAG | NUMBER | Run Mandatory Flag | ||
| TO_MOVE_MANDATORY_FLAG | NUMBER | To Move Mandatory Flag | ||
| SHOW_NEXT_OP_BY_DEFAULT | NUMBER | Show Next Operation By Default | ||
| SHOW_SCRAP_CODE | NUMBER | Show Scrap Code | ||
| SHOW_LOT_ATTRIB | NUMBER | Show Lot Attributes | ||
| TRACK_MULTIPLE_RES_USAGE_DATES | NUMBER | Track Multiple Resource Usage Dates | ||
| CHECK_SKILL | NUMBER | CHECK_SKILL |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | ROW_ID | |
| LEVEL_ID | NUMBER | Y | LEVEL_ID | |
| STANDARD_OPERATION_ID | NUMBER | STANDARD_OPERATION_ID | ||
| ORGANIZATION_ID | NUMBER | Y | ORGANIZATION_ID | |
| OPERATION_SEQUENCE_ID | NUMBER | OPERATION_SEQUENCE_ID | ||
| RESOURCE_ID | NUMBER | RESOURCE_ID | ||
| COMPETENCE_ID | NUMBER | COMPETENCE_ID | ||
| COMPETENCE | VARCHAR2 | (700) | COMPETENCE | |
| RATING_LEVEL_ID | NUMBER | RATING_LEVEL_ID | ||
| SKILL_LEVEL | VARCHAR2 | (121) | SKILL_LEVEL | |
| QUALIFICATION_TYPE_ID | NUMBER | Unique identifier for qualification type. | ||
| QUALIFICATION | VARCHAR2 | (150) | QUALIFICATION | |
| LAST_UPDATE_DATE | DATE | Y | LAST_UPDATE_DATE | |
| LAST_UPDATED_BY | NUMBER | Y | LAST_UPDATED_BY | |
| LAST_UPDATE_LOGIN | NUMBER | LAST_UPDATE_LOGIN | ||
| CREATION_DATE | DATE | Y | CREATION_DATE | |
| CREATED_BY | NUMBER | Y | CREATED_BY |
APPS.BOM_OPERATION_SKILLS_V is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
The BOM_OP_RESOURCES_VIEW contains information about resources used on
routings.
.
BOM_OP_RESOURCES_VIEW resolves the foreign key information of
BOM_OPERATION_RESOURCES from MFG_LOOKUPS, MTL_ITEM_FLEXFIELDS,
BOM_OPERATION_SEQUENCES, CST_ACTIVITIES, BOM_OPERATIONAL_ROUTINGS,
BOM_DEPARTMENTS, and BOM_RESOURCES.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ROUTING_TYPE | NUMBER | Y | Indicates if routing is engineering or manufacturing | |
| ALTERNATE_ROUTING_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| ASSEMBLY_ITEM_ID | NUMBER | Y | Assembly item identifier | |
| COMMON_ASSEMBLY_ITEM_ID | NUMBER | Assembly item identifier of the common assembly | ||
| ITEM_NUMBER | VARCHAR2 | (40) | Concatenated item flex segments | |
| PADDED_ITEM_NUMBER | VARCHAR2 | (40) | Padded concatenated item flex segments | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | Department |
| OPERATION_SEQ_NUM | NUMBER | Y | Operation sequence number | |
| OPERATION_DESCRIPTION | VARCHAR2 | (240) | Operation description | |
| EFFECTIVITY_DATE | DATE | Y | Effective date | |
| DISABLE_DATE | DATE | Disable date | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Y | Resource |
| RESOURCE_SEQ_NUM | NUMBER | Y | Resource sequence number | |
| ACTIVITY | VARCHAR2 | (10) | Activity for which resource is used | |
| AUTOCHARGE | VARCHAR2 | (4000) | Autocharge type for shopfloor transactions | |
| STANDARD_RATE | VARCHAR2 | (4000) | Use standard rate for costing | |
| ASSIGNED_UNITS | NUMBER | Y | Resource units assigned | |
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Usage rate | |
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Y | Usage rate inverse | |
| BASIS | VARCHAR2 | (4000) | Indicates whether resources are used per item or per lot | |
| SCHEDULE_FLAG | VARCHAR2 | (4000) | Indicates how resource is scheduled | |
| RESOURCE_OFFSET_PERCENT | NUMBER | Lead time offset percent | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ACD_TYPE | NUMBER | Acd type |
APPS.BOM_OP_RESOURCES_VIEW is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
This view allows you to retrieve data from BOM_CALENDAR_DATES without knowing the exception set or calendar name for an organization. The view joins with MTL_PARAMETERS and determines
the calendar and exception set to which the organization points. Further, joining to BOM_CALENDAR_DATES gets the calendar dates, sequence number, prior sequence num , prior date, next sequence number, and next date.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| CALENDAR_DATE | DATE | Y | Calendar date | |
| SEQ_NUM | NUMBER | Sequence number for working days | ||
| PRIOR_SEQ_NUM | NUMBER | Y | Prior sequence number | |
| PRIOR_DATE | DATE | Y | Calendar date for prior sequence number | |
| NEXT_SEQ_NUM | NUMBER | Y | Next sequence number | |
| NEXT_DATE | DATE | Y | Calendar date for next sequence number |
APPS.BOM_ORG_CAL_DATES_VIEW is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
You can view period information from this view without knowing the calendar name and the exception set for an organization. This view joins with MTL_PARAMETERS to find which calendar and
exception set an organization is pointing to. Further, joining to BOM_PERIOD_START_DATES gets all the information on the period start dates, sequence number, period name, next date and prior date.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| PERIOD_START_DATE | DATE | Y | Period start date | |
| PERIOD_SEQUENCE_NUM | NUMBER | Period sequence number | ||
| PERIOD_NAME | VARCHAR2 | (3) | Period name | |
| NEXT_DATE | DATE | Y | Next date | |
| PRIOR_DATE | DATE | Y | Prior date |
A public view which may be useful for custom reporting or other data requirements.
This view lets you see data from BOM_CAL_WEEK_START_DATES without knowing the calendar and the exception set for any given organization. This view joins with MTL_PARAMETERS and finds the
calendar name and exception set an organization is pointing to.
Further, joining to BOM_CAL_WEEK_START_DATES gives the week start
date, sequence number, next date, and prior date.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| WEEK_START_DATE | DATE | Y | Week start date | |
| SEQ_NUM | NUMBER | Y | Sequence number | |
| NEXT_DATE | DATE | Y | Next date | |
| PRIOR_DATE | DATE | Y | Prior date |
A public view which may be useful for custom reporting or other data requirements.
BOM_ORG_SHIFT_DATES_VIEW allows you to retrieve data from
BOM_SHIFT_DATES without knowing the exception set or calendar
name for an organization and shift number. This view joins with
MTL_PARAMETERS and determines the calendar and exception set to which
the organization points. Further, joining to BOM_CALENDAR_DATES gets
the calendar dates, sequence number, prior sequence num, prior date,
next sequence number, and next date. This view is used in Calendar
Define window to show the shift dates for a compiled calendar.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| SHIFT_NUM | NUMBER | Y | Shift number | |
| SHIFT_DATE | DATE | Y | Calendar date | |
| SEQ_NUM | NUMBER | Sequence Number | ||
| PRIOR_SEQ_NUM | NUMBER | Y | Sequence number for prior working date | |
| PRIOR_DATE | DATE | Y | Calendar date for prior sequence number | |
| NEXT_SEQ_NUM | NUMBER | Y | Sequence number for next working date | |
| NEXT_DATE | DATE | Y | Calendar date for next sequence number |
APPS.BOM_ORG_SHIFT_DATES_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PICKING_LINE_ID | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | (15) | ||
| PROGRAM_ID | NUMBER | (15) | ||
| PROGRAM_UPDATE_DATE | DATE | |||
| REQUEST_ID | NUMBER | (15) | ||
| PICKING_HEADER_ID | NUMBER | Y | ||
| SEQUENCE_NUMBER | NUMBER | Y | ||
| ORDER_LINE_ID | NUMBER | Y | ||
| COMPONENT_CODE | VARCHAR2 | (1000) | Y | |
| LINE_DETAIL_ID | NUMBER | Y | ||
| COMPONENT_RATIO | NUMBER | Y | ||
| REQUESTED_QUANTITY | NUMBER | Y | quantity released by pick release | |
| INVENTORY_ITEM_ID | NUMBER | Y | System-generated identifier of inventory item | |
| INCLUDED_ITEM_FLAG | VARCHAR2 | (1) | ||
| DATE_REQUESTED | DATE | Y | Date items were requested | |
| ORIGINAL_REQUESTED_QUANTITY | NUMBER | Y | Unshipped quantity | |
| WAREHOUSE_ID | NUMBER | System-generated identifier of inventory organization | ||
| SHIPPED_QUANTITY | NUMBER | |||
| CANCELLED_QUANTITY | NUMBER | |||
| SHIP_TO_SITE_USE_ID | NUMBER | |||
| SHIP_TO_CONTACT_ID | NUMBER | |||
| SHIPMENT_PRIORITY_CODE | VARCHAR2 | (30) | ||
| SHIP_METHOD_CODE | VARCHAR2 | (30) | ||
| DATE_CONFIRMED | DATE | |||
| RA_INTERFACE_STATUS | VARCHAR2 | (30) | ||
| INVOICED_QUANTITY | NUMBER | |||
| INVENTORY_STATUS | VARCHAR2 | (30) | Indicates whether inventory interface has processed line | |
| UNIT_CODE | VARCHAR2 | (3) | ||
| CONTEXT | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ATTRIBUTE15 | VARCHAR2 | (150) | ||
| SCHEDULE_DATE | DATE | |||
| DEMAND_CLASS_CODE | VARCHAR2 | (30) | ||
| COMPONENT_SEQUENCE_ID | NUMBER | |||
| CONFIGURATION_ITEM_FLAG | VARCHAR2 | (1) | ||
| LATEST_ACCEPTABLE_DATE | DATE |
APPS.BOM_PICKING_LINES_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TOP_BILL_SEQUENCE_ID | NUMBER | Y | Bill identifier of level 0 items | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| COMMON_BILL_SEQUENCE_ID | NUMBER | Common bill of material unique identifier | ||
| COMMON_ORGANIZATION_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COMPONENT_SEQUENCE_ID | NUMBER | Component unique identifier | ||
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| COMPONENT_QUANTITY | NUMBER | Quantity of component in bill of material | ||
| PLAN_LEVEL | NUMBER | Y | Level in bill | |
| EXTENDED_QUANTITY | NUMBER | Extended quantity including quantity per, yield, and shrinkage | ||
| SORT_ORDER | VARCHAR2 | (2000) | Y | Sorting sequence for the explosion |
| GROUP_ID | NUMBER | Explosion identifier | ||
| TOP_ALTERNATE_DESIGNATOR | VARCHAR2 | (10) | Alternate designator for level 0 | |
| COMPONENT_YIELD_FACTOR | NUMBER | Component yield | ||
| TOP_ITEM_ID | NUMBER | Item identifier of level 0 item | ||
| COMPONENT_CODE | VARCHAR2 | (1000) | Concatenation of component item identifiers | |
| INCLUDE_IN_ROLLUP_FLAG | NUMBER | Flag indicating if component is to be used when rolling up costs | ||
| LOOP_FLAG | NUMBER | Indicates whether a loop is detected | ||
| PLANNING_FACTOR | NUMBER | Factor used to multiply component quantity with to obtain planning quantity | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number | ||
| BOM_ITEM_TYPE | NUMBER | Type of item | ||
| PARENT_BOM_ITEM_TYPE | NUMBER | Parent item's bom item type | ||
| ASSEMBLY_ITEM_ID | NUMBER | Assembly item identifier | ||
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | ||
| WIP_SUPPLY_TYPE | NUMBER | Supply type | ||
| ITEM_NUM | NUMBER | Item sequence within bill of material structure | ||
| EFFECTIVITY_DATE | DATE | Effective date | ||
| DISABLE_DATE | DATE | Disable date | ||
| FROM_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| TO_END_ITEM_UNIT_NUMBER | VARCHAR2 | (30) | ||
| IMPLEMENTATION_DATE | DATE | Date on which engineering change order was implemented | ||
| OPTIONAL | NUMBER | Flag indicating if component is optional in bill of material | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator identifier | ||
| COMPONENT_REMARKS | VARCHAR2 | (240) | Component remarks | |
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| OPERATION_LEAD_TIME_PERCENT | NUMBER | Operation offset from first operation in routing | ||
| MUTUALLY_EXCLUSIVE_OPTIONS | NUMBER | Flag indicating if one or more children of component can be picked when taking an order | ||
| CHECK_ATP | NUMBER | Flag indicating if ATP check is required | ||
| REQUIRED_TO_SHIP | NUMBER | Flag indicating if component is required to ship | ||
| REQUIRED_FOR_REVENUE | NUMBER | Flag indicating if component is required for revenue | ||
| INCLUDE_ON_SHIP_DOCS | NUMBER | Flag indicating if component is included on shipping documents | ||
| LOW_QUANTITY | NUMBER | Minimum quantity allowed on an order | ||
| HIGH_QUANTITY | NUMBER | Maximum quantity allowed on an order | ||
| SO_BASIS | NUMBER | Quantity basis used by Oracle Order Management to determine how many units of component to put on an order | ||
| OPERATION_OFFSET | NUMBER | |||
| CURRENT_REVISION | VARCHAR2 | (3) | ||
| LOCATOR | VARCHAR2 | (40) | ||
| CONTEXT | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| OBJ_NAME | VARCHAR2 | (30) | ||
| PK1_VALUE | VARCHAR2 | (240) | ||
| PK2_VALUE | VARCHAR2 | (240) | ||
| PK3_VALUE | VARCHAR2 | (240) | ||
| PK4_VALUE | VARCHAR2 | (240) | ||
| PK5_VALUE | VARCHAR2 | (240) | ||
| FROM_END_ITEM_REV_ID | NUMBER | |||
| FROM_END_ITEM_MINOR_REV_ID | NUMBER | From End Item Minor Rev Id | ||
| TO_END_ITEM_REV_ID | NUMBER | |||
| TO_END_ITEM_MINOR_REV_ID | NUMBER | To End Item Minor Rev Id | ||
| NEW_COMPONENT_CODE | VARCHAR2 | (4000) | ||
| PARENT_SORT_ORDER | VARCHAR2 | (2000) | ||
| COMP_COMMON_BILL_SEQ_ID | NUMBER | |||
| COMP_BILL_SEQ_ID | NUMBER | |||
| ACCESS_FLAG | VARCHAR2 | (1) | ||
| ASSEMBLY_TYPE | NUMBER | |||
| REVISION_LABEL | VARCHAR2 | (260) | ||
| REVISION_ID | NUMBER | |||
| EFFECTIVITY_CONTROL | NUMBER | |||
| OBJECT_REVISION_ID | NUMBER | |||
| MINOR_REVISION_ID | NUMBER | |||
| MINOR_REVISION_CODE | VARCHAR2 | (30) | ||
| FROM_OBJECT_REVISION_ID | NUMBER | From Object Revision Id | ||
| FROM_MINOR_REVISION_ID | NUMBER | From Minor Revision Id | ||
| TO_OBJECT_REVISION_ID | NUMBER | To Object Revision Id | ||
| TO_MINOR_REVISION_ID | NUMBER | To Minor Revision Id | ||
| COMPONENT_ITEM_REVISION_ID | NUMBER | Item revision Identifier | ||
| COMPONENT_MINOR_REVISION_ID | NUMBER | |||
| BOM_IMPLEMENTATION_DATE | DATE |
APPS.BOM_PLM_EXPLOSION_TEMP is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COMPONENT_ITEM_ID | NUMBER | Component item identifier | ||
| BILL_SEQUENCE_ID | NUMBER | Y | Bill of material unique identifier | |
| FORECAST_CONTROL | VARCHAR2 | (80) | Type of forecast control for product family member | |
| PLANNING_METHOD | VARCHAR2 | (80) | Type of Planning Method for product family member | |
| BOM_ITEM_TYPE | VARCHAR2 | (80) | Y | Type of item |
APPS.BOM_PRODUCTFAMILY_MEM_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unqiue identifier | |
| COMPONENT_REFERENCE_DESIGNATOR | VARCHAR2 | (15) | Y | Component reference designator |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REF_DESIGNATOR_COMMENT | VARCHAR2 | (240) | Reference designator comment | |
| IMPLEMENTATION_DATE | DATE | Date on which engineering change order was implemented | ||
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| ACD_TYPE | NUMBER | Add or delete code from an engineering change order | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| COMPONENT_REFERENCE_DESIGNATOR | VARCHAR2 | (15) | Y | Reference designator |
| ACD_TYPE | NUMBER | Change type | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| IMPLEMENTATION_DATE | DATE | Implementation date | ||
| REF_DESIGNATOR_COMMENT | VARCHAR2 | (240) | Reference designator comment | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common Component Sequence Id |
A public view which may be useful for custom reporting or other data requirements.
View based on BOM_RESOURCES table. Main columns include
RESOURCE_ID, RESOURCE_CODE, DESCRIPTION, UNIT_OF_MEASURE,
COST_ELEMENT_ID, DISABLE_DATE, ORGANIZATION_ID, COST_CODE_TYPE.
No records are filtered out.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| RESOURCE_CODE | VARCHAR2 | (10) | Y | Resource code |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| UNIT_OF_MEASURE | VARCHAR2 | (3) | Unit of measure | |
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| DISABLE_DATE | DATE | Disable date | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_CODE_TYPE | NUMBER | Y | Cost code type | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| PURCHASE_ITEM_ID | NUMBER | Purchase item identifier | ||
| FUNCTIONAL_CURRENCY_FLAG | NUMBER | Y | Unit of measure is functional currency | |
| DEFAULT_ACTIVITY_ID | NUMBER | Default activity identifier | ||
| RESOURCE_TYPE | NUMBER | Resource type | ||
| AUTOCHARGE_TYPE | NUMBER | Autocharge for shopfloor transaction | ||
| STANDARD_RATE_FLAG | NUMBER | Use standard rate for shopfloor transaction | ||
| DEFAULT_BASIS_TYPE | NUMBER | Default basis | ||
| ABSORPTION_ACCOUNT | NUMBER | Absorption account | ||
| ALLOW_COSTS_FLAG | NUMBER | Y | Allow costs to be defined | |
| RATE_VARIANCE_ACCOUNT | NUMBER | Rate variance account | ||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | Expenditure type | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| BATCHABLE | NUMBER | Batchable flag | ||
| MIN_BATCH_CAPACITY | NUMBER | Minimum batch capacity | ||
| MAX_BATCH_CAPACITY | NUMBER | Maximum batch capacity | ||
| BATCH_CAPACITY_UOM | VARCHAR2 | (3) | Batch capacity Unit of Measure | |
| BATCH_WINDOW | NUMBER | Batch window | ||
| BATCH_WINDOW_UOM | VARCHAR2 | (3) | Batch window UOM | |
| COMPETENCE_ID | NUMBER | (15) | Competence idetifier for people resources | |
| RATING_LEVEL_ID | NUMBER | (15) | Rating level identifier for the competence of a person resource | |
| QUALIFICATION_TYPE_ID | NUMBER | (9) | Qualification type identifier for a person resource | |
| BILLABLE_ITEM_ID | NUMBER | Item ID for the billable resource | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory for resource type machine | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator id for resource type machine |
APPS.BOM_RESOURCES_ALL_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| RESOURCE_CODE | VARCHAR2 | (10) | Y | Resource code |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DISABLE_DATE | DATE | Disable date | ||
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| PURCHASE_ITEM_ID | NUMBER | Purchase item identifier | ||
| COST_CODE_TYPE | NUMBER | Y | Cost code type | |
| FUNCTIONAL_CURRENCY_FLAG | NUMBER | Y | Unit of measure is functional currency | |
| UNIT_OF_MEASURE | VARCHAR2 | (3) | Unit of measure | |
| DEFAULT_ACTIVITY_ID | NUMBER | Default activity identifier | ||
| DEFAULT_ACTIVITY | VARCHAR2 | (10) | Activity name | |
| RESOURCE_TYPE | NUMBER | Resource type | ||
| AUTOCHARGE_TYPE | NUMBER | Autocharge for shopfloor transaction | ||
| STANDARD_RATE_FLAG | NUMBER | Use standard rate for shopfloor transaction | ||
| DEFAULT_BASIS_TYPE | NUMBER | Default basis | ||
| ALLOW_COSTS_FLAG | NUMBER | Y | Allow costs to be defined | |
| ABSORPTION_ACCOUNT | NUMBER | Absorption account | ||
| RATE_VARIANCE_ACCOUNT | NUMBER | Rate variance account | ||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | Expenditure type | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| BATCHABLE | NUMBER | |||
| MIN_BATCH_CAPACITY | NUMBER | |||
| MAX_BATCH_CAPACITY | NUMBER | |||
| BATCH_CAPACITY_UOM | VARCHAR2 | (3) | ||
| BATCH_WINDOW | NUMBER | |||
| BATCH_WINDOW_UOM | VARCHAR2 | (3) | ||
| COMPETENCE_ID | NUMBER | (15) | ||
| RATING_LEVEL_ID | NUMBER | (15) | ||
| QUALIFICATION_TYPE_ID | NUMBER | (9) | ||
| BILLABLE_ITEM_ID | NUMBER | |||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory for resource type machine | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator id for resource type machine | ||
| BATCHING_PENALTY | NUMBER | Batching Penalty |
A public view which may be useful for custom reporting or other data requirements.
View based on BOM_RESOURCES table. Main columns include
RESOURCE_ID, RESOURCE_CODE, DESCRIPTION, UNIT_OF_MEASURE,
COST_ELEMENT_ID, DISABLE_DATE, ORGANIZATION_ID, COST_CODE_TYPE.
Disabled records are filtered out.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| RESOURCE_CODE | VARCHAR2 | (10) | Y | Resource code |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| UNIT_OF_MEASURE | VARCHAR2 | (3) | Unit of measure | |
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| DISABLE_DATE | DATE | Disable date | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_CODE_TYPE | NUMBER | Y | Cost code type | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| PURCHASE_ITEM_ID | NUMBER | Purchase item identifier | ||
| FUNCTIONAL_CURRENCY_FLAG | NUMBER | Y | Unit of measure is functional currency | |
| DEFAULT_ACTIVITY_ID | NUMBER | Default activity identifier | ||
| RESOURCE_TYPE | NUMBER | Resource type | ||
| AUTOCHARGE_TYPE | NUMBER | Autocharge for shopfloor transaction | ||
| STANDARD_RATE_FLAG | NUMBER | Use standard rate for shopfloor transactions | ||
| DEFAULT_BASIS_TYPE | NUMBER | Default basis | ||
| ABSORPTION_ACCOUNT | NUMBER | Absorption account | ||
| ALLOW_COSTS_FLAG | NUMBER | Y | Allow costs to be defined | |
| RATE_VARIANCE_ACCOUNT | NUMBER | Rate variance account | ||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | Expenditure type | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| BATCHABLE | NUMBER | Batchable flag | ||
| MIN_BATCH_CAPACITY | NUMBER | Minimum batch capacity | ||
| MAX_BATCH_CAPACITY | NUMBER | Maximum batch capacity | ||
| BATCH_CAPACITY_UOM | VARCHAR2 | (3) | Batch capacity Unit of Measure | |
| BATCH_WINDOW | NUMBER | Batch window | ||
| BATCH_WINDOW_UOM | VARCHAR2 | (3) | Batch window UOM | |
| COMPETENCE_ID | NUMBER | (15) | Comptence identifier for people resources | |
| RATING_LEVEL_ID | NUMBER | (15) | Rating level identifier for the competence chosen for the person resource type | |
| QUALIFICATION_TYPE_ID | NUMBER | (9) | Qualification type identifier for person resource type | |
| BILLABLE_ITEM_ID | NUMBER | Item ID for billable resources | ||
| SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | Supply subinventory for resource type machine | |
| SUPPLY_LOCATOR_ID | NUMBER | Supply locator id for resource type machine |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unique identifier | |
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| SHIFT_NUM | NUMBER | Y | Shift number | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| FROM_DATE | DATE | Y | Capacity exception from date | |
| TO_DATE | DATE | Capacity exception to date | ||
| FROM_TIME | NUMBER | Capacity exception from time | ||
| TO_TIME | NUMBER | Capacity exception to time | ||
| CAPACITY_CHANGE | NUMBER | Capacity change | ||
| SIMULATION_SET | VARCHAR2 | (10) | Y | Simulation set identifier |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ACTION_TYPE | NUMBER | Type of capacity modification | ||
| REASON_CODE | VARCHAR2 | (80) | Reason code | |
| DOWNTIME_GROUP_ID | NUMBER | Unique batch identifier of Load Production Equipment Downtime process |
APPS.BOM_RESOURCE_CHANGES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row identifier | |
| RESOURCE_ID | NUMBER | Y | Resource identifier | |
| DOWNCODE | NUMBER | Y | Resource downcode | |
| MEANING | VARCHAR2 | (80) | Y | Lookup meaning |
| DESCRIPTION | VARCHAR2 | (240) | Resouce downcode description | |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO column | |
| CREATION_DATE | DATE | Y | Standard WHO column | |
| CREATED_BY | NUMBER | Y | Standard WHO column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO column |
APPS.BOM_RESOURCE_DOWNCODES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unique identifier | |
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| SHIFT_NUM | NUMBER | Y | Shift number | |
| SHIFT_DESCRIPTION | VARCHAR2 | (240) | Description | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| CAPACITY_UNITS | NUMBER |
APPS.BOM_RESOURCE_SHIFTS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unique identifier | |
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| SHIFT_NUM | NUMBER | Y | Shift number | |
| SIMULATION_SET | VARCHAR2 | (10) | Y | Simulation set identifier |
| FROM_DATE | DATE | Y | Capacity exception from date | |
| FROM_TIME | NUMBER | Capacity exception from time | ||
| TO_DATE | DATE | Capacity exception to date | ||
| TO_TIME | NUMBER | Capacity exception to time | ||
| INSTANCE_ID | NUMBER | Y | ||
| SERIAL_NUMBER | VARCHAR2 | (30) | ||
| ACTION_TYPE | NUMBER | Type of capacity modification | ||
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| EMPLOYEE_NUMBER | VARCHAR2 | (30) | Employee Number | |
| FULL_NAME | VARCHAR2 | (240) | Fullname | |
| CAPACITY_CHANGE | NUMBER | |||
| EFFECTIVE_START_DATE | DATE | Y | Effective Start Date | |
| EFFECTIVE_END_DATE | DATE | Y | Effective End Date | |
| REASON_CODE | VARCHAR2 | (80) | Reason code |
APPS.BOM_RES_INSTANCE_CHANGES_EMP_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unique identifier | |
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| SHIFT_NUM | NUMBER | Y | Shift number | |
| SIMULATION_SET | VARCHAR2 | (10) | Y | Simulation set identifier |
| FROM_DATE | DATE | Y | Capacity exception from date | |
| FROM_TIME | NUMBER | Capacity exception from time | ||
| TO_DATE | DATE | Capacity exception to date | ||
| TO_TIME | NUMBER | Capacity exception to time | ||
| INSTANCE_ID | NUMBER | Y | ||
| SERIAL_NUMBER | VARCHAR2 | (30) | ||
| ACTION_TYPE | NUMBER | Type of capacity modification | ||
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| EQUIPMENT | VARCHAR2 | (40) | Item | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| CAPACITY_CHANGE | NUMBER | |||
| REASON_CODE | VARCHAR2 | (80) | ||
| DOWNTIME_SOURCE_CODE | NUMBER | Code to identify souce of the maintenance downtime | ||
| WIP_ENTITY_ID | NUMBER | Unique identifier of maintenance work order | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number of maintenance work order | ||
| MAINTENANCE_ORGANIZATION_ID | NUMBER | Organization performing the maintenance work order | ||
| DOWNTIME_GROUP_ID | NUMBER | Unique batch identifier of Load Production Equipment Downtime process | ||
| DOWNTIME_NEGOTIABLE_FLAG | NUMBER |
APPS.BOM_RES_INSTANCE_CHANGES_EQP_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ASSEMBLY_ITEM_ID | NUMBER | Y | Inventory item identifier of manufactured assembly | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ALTERNATE_ROUTING_DESIGNATOR | VARCHAR2 | (10) | Alternate designator code | |
| ROUTING_SEQUENCE_ID | NUMBER | Y | Routing unique identifier | |
| COMMON_ROUTING_SEQUENCE_ID | NUMBER | Y | Routing identifier of common routing | |
| COMPLETION_SUBINVENTORY | VARCHAR2 | (10) | Completion subinventory | |
| COMPLETION_LOCATOR_ID | NUMBER | Completion locator identifier | ||
| ROUTING_TYPE | NUMBER | Y | 2=Engineering routing 1=Manufacturing routing | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| CFM_ROUTING_FLAG | NUMBER | Column to indicate if routing is for CFM. | ||
| PENDING_FROM_ECN | VARCHAR2 | (10) |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Item identifier | |
| PROCESS_REVISION | VARCHAR2 | (3) | Y | Routing revision |
| EFFECTIVITY_DATE | VARCHAR2 | (19) | Effective date | |
| HIGH_DATE | VARCHAR2 | (19) | Date up to which revision is valid | |
| IMPLEMENTATION_DATE | VARCHAR2 | (19) | Date on which revision is implemented |
APPS.BOM_ROUTING_REVISIONS_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Routing item identifier | |
| CURRENT_REVISION | VARCHAR2 | (3) | Y | Current revision |
| EFFECTIVITY_DATE | DATE | Y | Effective date |
APPS.BOM_RTG_CURRENT_REV_VIEW is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unique identifier | |
| SETUP_ID | NUMBER | Y | Resource unique identifier | |
| SETUP_CODE | VARCHAR2 | (10) | Y | Resource code |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ORGANIZATION_ID | NUMBER | Y | Organization Id |
APPS.BOM_SETUP_TYPES_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| EXCEPTION_SET_ID | NUMBER | Y | Exception set unique identifier | |
| SHIFT_NUM | NUMBER | Y | Shift number | |
| YEAR | NUMBER | Calendar year | ||
| MONTH_NUM | NUMBER | Month Number | ||
| MONTH | VARCHAR2 | (9) | Calendar Month | |
| FIRST_DAY | DATE | First day of the month |
APPS.BOM_SHIFT_MONTHS_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CALENDAR_CODE | VARCHAR2 | (10) | Y | Workday calendar identifier |
| EXCEPTION_SET_ID | NUMBER | Y | Exception set unique identifier | |
| SHIFT_NUM | NUMBER | Y | Shift number | |
| YEAR | NUMBER | Calendar Year | ||
| MONTH | VARCHAR2 | (3) | Month | |
| MONTH_NUM | NUMBER | Month Number | ||
| WEEK | NUMBER | Week | ||
| SUN | NUMBER | Sunday | ||
| SUN_ON | VARCHAR2 | (1) | Exception Type | |
| MON | NUMBER | Monday | ||
| MON_ON | VARCHAR2 | (1) | Exception type | |
| TUE | NUMBER | Tuesday | ||
| TUE_ON | VARCHAR2 | (1) | Exception type | |
| WED | NUMBER | Wednusday | ||
| WED_ON | VARCHAR2 | (1) | Exception Type | |
| THU | NUMBER | Thursday | ||
| THU_ON | VARCHAR2 | (1) | Exception Type | |
| FRI | NUMBER | Friday | ||
| FRI_ON | VARCHAR2 | (1) | Exception Type | |
| SAT | NUMBER | Saturday | ||
| SAT_ON | VARCHAR2 | (1) | Exception type |
APPS.BOM_SHIFT_WEEKS_VIEW is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
View based on BOM_STANDARD_OPERATIONS table. Main columns include
STANDARD_OPERATION_ID, LINE_ID, OPERATION_CODE, OPERATION_TYPE,
OPERATION_DESCRIPTION, ORGANIZATION_ID. No records are filtered out.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SEQUENCE_NUM | NUMBER | Sequence number | ||
| LINE_ID | NUMBER | Line identifier | ||
| OPERATION_TYPE | NUMBER | Operation type | ||
| STANDARD_OPERATION_ID | NUMBER | Y | Standard operation identifier | |
| OPERATION_CODE | VARCHAR2 | (4) | Y | Operation code |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| DEPARTMENT_ID | NUMBER | Y | Department identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | Minimum transfer quantity | ||
| COUNT_POINT_TYPE | NUMBER | Count point type | ||
| OPERATION_DESCRIPTION | VARCHAR2 | (240) | Operation description | |
| OPTION_DEPENDENT_FLAG | NUMBER | Indicates whether to use this operation in all configuration routings, even if no components of the configuration are used in this operation | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| BACKFUSH_FLAG | NUMBER | Backflush at this operation | ||
| DEFAULT_SUBINVENTORY | VARCHAR2 | (10) | Default subinventory | |
| DEFAULT_LOCATOR_ID | NUMBER | Default locator identifier | ||
| CRITICAL_TO_QUALITY | VARCHAR2 | (1) | Critical to quality | |
| VALUE_ADDED | VARCHAR2 | (1) | Value added |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LINE_CODE | VARCHAR2 | (10) | Line Code | |
| SEQUENCE_NUM | NUMBER | Operation Sequence Number, showing the sequence of Processes and Line Operations. | ||
| LINE_ID | NUMBER | Line Identifier for CFM Operations | ||
| OPERATION_TYPE | NUMBER | Operation Type 1: Standard Operation/Event 2: Process 3: Line Operation | ||
| ROW_ID | ROWID | (10) | Rowid of table BOM_STANDARD_OPERATIONS | |
| STANDARD_OPERATION_ID | NUMBER | Y | Standard operation unique identifier | |
| OPERATION_CODE | VARCHAR2 | (4) | Y | Standard operation code |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | Department code |
| DEPARTMENT_DESCRIPTION | VARCHAR2 | (240) | Description | |
| LOCATION_ID | NUMBER | Location identifier | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | Minimum operation transfer quantity | ||
| COUNT_POINT_TYPE | NUMBER | Count point type (combination of count point and autocharge flags) | ||
| OPERATION_DESCRIPTION | VARCHAR2 | (240) | Specific operation description | |
| OPTION_DEPENDENT_FLAG | NUMBER | Indicates whether to use this operation in all configuration routings, even if no components of the configuration are used in this operation | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| BACKFLUSH_FLAG | NUMBER | Backflush at this operation | ||
| COUNT_POINT_FLAG | NUMBER | Count Point (Yes or No) | ||
| AUTOCHARGE_FLAG | NUMBER | Autocharge (Yes or No) | ||
| WMS_TASK_TYPE | NUMBER | WMS Task Type | ||
| OPERATION_YIELD_ENABLED | NUMBER | Indicates whether operation yield is to be considered during costing | ||
| YIELD | NUMBER | Operation Yield for an operation. | ||
| SHUTDOWN_TYPE | VARCHAR2 | (30) | Shutdown type | |
| SHUTDOWN_TYPE_VALUE | VARCHAR2 | (80) | Shutdown type value | |
| DEFAULT_SUBINVENTORY | VARCHAR2 | (10) | Default subinventory | |
| DEFAULT_LOCATOR_ID | NUMBER | Default locator identifier | ||
| LOWEST_ACCEPTABLE_YIELD | NUMBER | |||
| USE_ORG_SETTINGS | NUMBER | |||
| CRITICAL_TO_QUALITY | VARCHAR2 | (1) | Critical to quality | |
| QUEUE_MANDATORY_FLAG | NUMBER | |||
| VALUE_ADDED | VARCHAR2 | (1) | Value added | |
| RUN_MANDATORY_FLAG | NUMBER | |||
| TO_MOVE_MANDATORY_FLAG | NUMBER | |||
| SHOW_NEXT_OP_BY_DEFAULT | NUMBER | |||
| SHOW_SCRAP_CODE | NUMBER | |||
| SHOW_LOT_ATTRIB | NUMBER | |||
| TRACK_MULTIPLE_RES_USAGE_DATES | NUMBER | |||
| CHECK_SKILL | NUMBER | CHECK_SKILL |
A public view which may be useful for custom reporting or other data requirements.
This view only shows standard operations with valid departments.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Rowid of table BOM_STANDARD_OPERATIONS | |
| STANDARD_OPERATION_ID | NUMBER | Y | Standard operation unique identifier | |
| OPERATION_CODE | VARCHAR2 | (4) | Y | Standard operation code |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| DEPARTMENT_ID | NUMBER | Y | Department unique identifier | |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | Department code |
| DEPARTMENT_DESCRIPTION | VARCHAR2 | (240) | Department description | |
| LOCATION_ID | NUMBER | Location identifier | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| MINIMUM_TRANSFER_QUANTITY | NUMBER | Minimum operation transfer quantity | ||
| COUNT_POINT_TYPE | NUMBER | Count point | ||
| OPERATION_DESCRIPTION | VARCHAR2 | (240) | Specific operation description | |
| OPTION_DEPENDENT_FLAG | NUMBER | Indicates whether to use this operation in all configuration routings, even if no components of the configuration are used in this operation | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| BACKFLUSH_FLAG | NUMBER | Backflush at this operation | ||
| DEFAULT_SUBINVENTORY | VARCHAR2 | (10) | Default subinventory | |
| DEFAULT_LOCATOR_ID | NUMBER | Default locator identifier | ||
| CRITICAL_TO_QUALITY | VARCHAR2 | (1) | Critical to quality | |
| VALUE_ADDED | VARCHAR2 | (1) | Value added |
APPS.BOM_STANDARD_OPERATIONS_VAL_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row identifier | |
| STANDARD_OPERATION_ID | NUMBER | Y | Standard operation identifier | |
| SEQUENCE_NUMBER | NUMBER | Y | Sequence number of the operation | |
| BONUS_CODE | NUMBER | Y | Bonus code | |
| MEANING | VARCHAR2 | (80) | Y | Lookup value |
| DESCRIPTION | VARCHAR2 | (240) | Bonus code description | |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO column | |
| CREATION_DATE | DATE | Y | Standard WHO column | |
| CREATED_BY | NUMBER | Y | Standard WHO column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO column |
APPS.BOM_STD_OP_BONUS_CODES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_TYPE | NUMBER | Operation Type 1: Standard Operation/Event 2: Process 3: Line Operation | ||
| ROW_ID | ROWID | (10) | Rowid from table BOM_STD_OP_RESOURCES. | |
| STANDARD_OPERATION_ID | NUMBER | Y | Standard operation unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| RESOURCE_CODE | VARCHAR2 | (10) | Y | Resource code |
| UNIT_OF_MEASURE | VARCHAR2 | (3) | Unit of measure | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| ACTIVITY | VARCHAR2 | (10) | Activity name | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| RESOURCE_SEQ_NUM | NUMBER | Y | Resource sequence number | |
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Resource usage rate | |
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Y | Resource usage rate inverse | |
| BASIS_TYPE | NUMBER | Y | Basis type | |
| AUTOCHARGE_TYPE | NUMBER | Y | Charging for shop floor transactions | |
| STANDARD_RATE_FLAG | NUMBER | Y | Use standard rate for shopfloor transaction | |
| ASSIGNED_UNITS | NUMBER | Resource units assigned | ||
| SCHEDULE_FLAG | NUMBER | Y | Schedule this resource | |
| AVAILABLE_24_HOURS_FLAG | NUMBER | Y | Resource is available 24 hours or by shifts | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| SUBSTITUTE_GROUP_NUM | NUMBER | substitute group number field |
APPS.BOM_STD_OP_RESOURCES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row identifier | |
| RESPONSIBILITY_ID | NUMBER | Y | Responsibility id | |
| APPLICATION_ID | NUMBER | Y | Application to which current responsibility belongs to | |
| STANDARD_OPERATION_ID | NUMBER | Y | Standard operation id | |
| RESPONSIBILITY_NAME | VARCHAR2 | (100) | Y | Responsibility name |
| DESCRIPTION | VARCHAR2 | (240) | Responsibility description | |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO column | |
| CREATION_DATE | DATE | Y | Standard WHO column | |
| CREATED_BY | NUMBER | Y | Standard WHO column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO column |
APPS.BOM_STD_OP_RESP_EXCL_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row identifier | |
| STANDARD_OPERATION_ID | NUMBER | Y | Standard operation id | |
| SEQUENCE_NUM | NUMBER | Y | Sequence number of the operation | |
| SCRAP_CODE | NUMBER | Y | Scrap code | |
| MEANING | VARCHAR2 | (80) | Y | Lookup value |
| MAX_ACCEPTABLE_SCRAP_QTY | NUMBER | Maximum acceptable scrap quantity | ||
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard WHO column | |
| CREATION_DATE | DATE | Y | Standard WHO column | |
| CREATED_BY | NUMBER | Y | Standard WHO column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard WHO column |
APPS.BOM_STD_OP_SCRAP_CODES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_TYPE | NUMBER | |||
| ROW_ID | ROWID | (10) | ||
| STANDARD_OPERATION_ID | NUMBER | Y | ||
| RESOURCE_ID | NUMBER | Y | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| SUBSTITUTE_GROUP_NUM | NUMBER | Y | ||
| REPLACEMENT_GROUP_NUM | NUMBER | Y | ||
| UNIT_OF_MEASURE | VARCHAR2 | (3) | ||
| ACTIVITY_ID | NUMBER | |||
| ACTIVITY | VARCHAR2 | (10) | ||
| STANDARD_RATE_FLAG | NUMBER | Y | ||
| ASSIGNED_UNITS | NUMBER | Y | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | ||
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Y | ||
| BASIS_TYPE | NUMBER | Y | ||
| SCHEDULE_FLAG | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_LOGIN | NUMBER | |||
| AUTOCHARGE_TYPE | NUMBER | Y | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE | |||
| ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ATTRIBUTE15 | VARCHAR2 | (150) | ||
| AVAILABLE_24_HOURS_FLAG | NUMBER | Y | taken from bom_department_resources | |
| SCHEDULE_SEQ_NUM | NUMBER | Schedule Sequence Number for Alternate Recources |
APPS.BOM_STD_SUB_OP_RESOURCES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OPERATION_TYPE | NUMBER | Operation Type 1: Standard Operation/Event 2: Process 3: Line Operation | ||
| ROW_ID | ROWID | (10) | Rowid from table BOM_STD_OP_RESOURCES. | |
| STANDARD_OPERATION_ID | NUMBER | Y | Standard operation unique identifier | |
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| RESOURCE_CODE | VARCHAR2 | (10) | Y | Resource code |
| UNIT_OF_MEASURE | VARCHAR2 | (3) | Unit of measure | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| ACTIVITY | VARCHAR2 | (10) | Activity name | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| RESOURCE_SEQ_NUM | NUMBER | Y | Resource sequence number | |
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Resource usage rate | |
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Y | Resource usage rate inverse | |
| BASIS_TYPE | NUMBER | Y | Basis type | |
| AUTOCHARGE_TYPE | NUMBER | Y | Charging for shop floor transactions | |
| STANDARD_RATE_FLAG | NUMBER | Y | Use standard rate for shopfloor transaction | |
| ASSIGNED_UNITS | NUMBER | Resource units assigned | ||
| SCHEDULE_FLAG | NUMBER | Y | Schedule this resource | |
| AVAILABLE_24_HOURS_FLAG | NUMBER | Y | Resource is available 24 hours or by shifts | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
APPS.BOM_STP_STD_OP_RESOURCES_V is not referenced by any database object
MultiLingual view (a language resolved view of the data.)
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EXTENSION_ID | NUMBER | Y | Extension id | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill sequence id | |
| BILL_REVISION_ID | NUMBER | Bill revision identifier | ||
| STRUCTURE_TYPE_ID | NUMBER | Y | Structure type identifier | |
| CHANGE_LINE_ID | NUMBER | Change line id | ||
| ACD_TYPE | NUMBER | ACD type | ||
| ATTR_GROUP_ID | NUMBER | Y | Attribute group id | |
| LAST_UPDATE_DATE | DATE | Y | Standard WHO column | |
| LAST_UPDATED_BY | NUMBER | (15) | Y | Standard WHO column |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Standard WHO column | |
| CREATED_BY | NUMBER | (15) | Y | Standard WHO column |
| CREATION_DATE | DATE | Y | Standard WHO column | |
| SOURCE_LANG | VARCHAR2 | (30) | Y | Base language |
| LANGUAGE | VARCHAR2 | (30) | Y | Language |
| C_EXT_ATTR1 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR2 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR3 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR4 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR5 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR6 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR7 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR8 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR9 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR10 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR11 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR12 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR13 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR14 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR15 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR16 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR17 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR18 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR19 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR20 | VARCHAR2 | (150) | Character attributes | |
| N_EXT_ATTR1 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR1 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR2 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR2 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR3 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR3 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR4 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR4 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR5 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR5 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR6 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR6 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR7 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR7 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR8 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR8 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR9 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR9 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR10 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR10 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| D_EXT_ATTR1 | DATE | Date attributes | ||
| D_EXT_ATTR2 | DATE | Date attributes | ||
| D_EXT_ATTR3 | DATE | Date attributes | ||
| D_EXT_ATTR4 | DATE | Date attributes | ||
| D_EXT_ATTR5 | DATE | Date attributes | ||
| C_EXT_ATTR21 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR22 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR23 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR24 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR25 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR26 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR27 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR28 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR29 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR30 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR31 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR32 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR33 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR34 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR35 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR36 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR37 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR38 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR39 | VARCHAR2 | (150) | Character attributes | |
| C_EXT_ATTR40 | VARCHAR2 | (150) | Character attributes | |
| N_EXT_ATTR11 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR11 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR12 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR12 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR13 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR13 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR14 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR14 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR15 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR15 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR16 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR16 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR17 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR17 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR18 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR18 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR19 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR19 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| N_EXT_ATTR20 | NUMBER | Numeric attributes | ||
| UOM_EXT_ATTR20 | VARCHAR2 | (3) | Unit of measure for the corresponding numeric attributes | |
| D_EXT_ATTR6 | DATE | Date attributes | ||
| D_EXT_ATTR7 | DATE | Date attributes | ||
| D_EXT_ATTR8 | DATE | Date attributes | ||
| D_EXT_ATTR9 | DATE | Date attributes | ||
| D_EXT_ATTR10 | DATE | Date attributes | ||
| TL_EXT_ATTR1 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR2 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR3 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR4 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR5 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR6 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR7 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR8 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR9 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR10 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR11 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR12 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR13 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR14 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR15 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR16 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR17 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR18 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR19 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR20 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR21 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR22 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR23 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR24 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR25 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR26 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR27 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR28 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR29 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR30 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR31 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR32 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR33 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR34 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR35 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR36 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR37 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR38 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR39 | VARCHAR2 | (1000) | Translated value for the character attributes | |
| TL_EXT_ATTR40 | VARCHAR2 | (1000) | Translated value for the character attributes |
APPS.BOM_STRUCTURES_EXT_VL is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
BOM_STRUCTURES_OCV stores information to display bom structure type.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CODE | NUMBER | Y | Structure Type Unique Identifier | |
| MEANING | VARCHAR2 | (30) | Y | Structure Type Name |
| LANGUAGE | VARCHAR2 | (4) | Y | The language code of the language which the translatable fields are translated to |
APPS.BOM_STRUCTURES_OCV is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
This View is used for Structure Sync operations with external systems. Currently this is being used for Complex Product Sync with Siebel
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ASSEMBLY_ITEM_ID | NUMBER | Assembly Item identifier | ||
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| SORT_ORDER | VARCHAR2 | (2000) | Y | Sort Order for Explosion |
| PARENT_SORT_ORDER | VARCHAR2 | (2000) | Parent Sort Order for Explosion | |
| PLAN_LEVEL | NUMBER | Y | Plan Level for Explosion | |
| EXPLODE_GROUP_ID | NUMBER | Explosion Group Identifier | ||
| TOP_ITEM_ID | NUMBER | Y | Top Item Identifier | |
| TOP_BILL_SEQUENCE_ID | NUMBER | Y | Top Bill Sequence Identifier | |
| BILL_SEQUENCE_ID | NUMBER | Y | Bill Sequence Identifier | |
| COMPONENT_ITEM_ID | NUMBER | Y | Component Item Identifier | |
| COMPONENT_SEQUENCE_ID | NUMBER | Component Sequence Id | ||
| COMPONENT_QUANTITY | NUMBER | Component Quantity | ||
| EFFECTIVITY_DATE | DATE | Start Effective Date for Component | ||
| DISABLE_DATE | DATE | Disable Date for Component | ||
| COMP_BILL_SEQ_ID | NUMBER | Component Bill Sequence Identifier | ||
| ASSEMBLY_ITEM_NAME | VARCHAR2 | (40) | Assembly Item Name | |
| ASSEMBLY_ITEM_DESCRIPTION | VARCHAR2 | (240) | Assembly Item Description | |
| ASSEM_CUSTORDERENABLED_FLAG | VARCHAR2 | (1) | Y | Customer Order Enabled Flag for Assembly |
| ASSEM_CUSTORDER_FLAG | VARCHAR2 | (1) | Y | Customer Orderable Flag for Assembly |
| ASSEM_EFFECTIVITY_CONTROL | NUMBER | Effectivity Control for Assembly | ||
| ASSEMBLY_BOM_ITEM_TYPE | NUMBER | Y | BOM Item Type for Assembly | |
| ASSEM_PRIMARY_UOM | VARCHAR2 | (3) | Primary UOM Code for Assembly | |
| COMPONENT_ITEM_NAME | VARCHAR2 | (40) | Component Item Name | |
| COMPONENT_ITEM_DESCRIPTION | VARCHAR2 | (240) | Component Item Description | |
| COMP_CUSTORDERENABLED_FLAG | VARCHAR2 | (1) | Y | Customer Order Enabled Flag for Component |
| COMP_CUSORDER_FLAG | VARCHAR2 | (1) | Y | Customer Orderable Flag for Component |
| COMP_EFFECTIVITY_CONTROL | NUMBER | Effectivity Control for Component | ||
| COMP_BOM_ITEM_TYPE | NUMBER | Y | BOM Item Type for Component | |
| COMP_PRIMARY_UOM | VARCHAR2 | (3) | Primary UOM Code for Component | |
| OPERATING_UNIT_NAME | VARCHAR2 | (240) | Y | Operating Unit Name |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization Code | |
| ORGANIZATION_NAME | VARCHAR2 | (3) | Organization Name | |
| OPERATING_UNIT_ID | NUMBER | (15) | Y | Operating Unit Id |
MultiLingual view (a language resolved view of the data.)
This is a view over Structure type base table and translation table
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unique identifier | |
| STRUCTURE_TYPE_ID | NUMBER | Y | Structure Type Unique Identifier | |
| LANGUAGE | VARCHAR2 | (4) | Y | The language code of the language which the translatable fields are translated to |
| SOURCE_LANG | VARCHAR2 | (4) | Y | Language code of the language which the values of the translatable columns were originally entered |
| LAST_UPDATE_DATE | DATE | Y | Standard Who Column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who Column | |
| CREATION_DATE | DATE | Y | Standard Who Column | |
| CREATED_BY | NUMBER | Y | Standard Who Column | |
| LAST_UPDATE_LOGIN | NUMBER | Y | Standard Who Column | |
| STRUCTURE_TYPE_NAME | VARCHAR2 | (30) | Y | Structure Type Name |
| ITEM_CATALOG_GROUP_ID | NUMBER | Item Catalog group identifier | ||
| EFFECTIVE_DATE | DATE | Y | Effective Date for structure type | |
| STRUCTURE_CREATION_ALLOWED | VARCHAR2 | (1) | Y | Flag to decide Structure creation |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DISABLE_DATE | DATE | Disable date for a structure type | ||
| PARENT_STRUCTURE_TYPE_ID | NUMBER | Parent Structure Type Identifier | ||
| ENABLE_ATTACHMENTS_FLAG | VARCHAR2 | (1) | Flag to decide enabling attachments | |
| DISPLAY_NAME | VARCHAR2 | (80) | Y | Display Name for Structure Type |
| ENABLE_UNIMPLEMENTED_BOMS | VARCHAR2 | (1) | Enable Unimplemented Boms | |
| ALLOW_SUBTYPES | VARCHAR2 | (1) | Allow Subtypes |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| STRUCTURE_TYPE_ID | VARCHAR2 | (150) | Structure type id | |
| PARENT_STRUCTURE_TYPE_ID | NUMBER | Parent's structure type id | ||
| STRUCTURE_TYPE_NAME | VARCHAR2 | (30) | Y | Structure type name |
| ATTR_GROUP_NAME | VARCHAR2 | (30) | Y | Attribute group name |
| ATTR_GROUP_TYPE | VARCHAR2 | (40) | Y | Attribute group type |
| ATTR_GROUP_ID | NUMBER | (10) | Y | Attribute group id |
| ATTR_GROUP_DESCRIPTION | VARCHAR2 | (240) | Attribute group description | |
| ATTR_GROUP_DISP_NAME | VARCHAR2 | (80) | Y | Attribute group display name |
| OBJECT_NAME | VARCHAR2 | (430) | Y | Object name |
| APPLICATION_ID | NUMBER | (10) | Y |
APPS.BOM_STRUCT_ATTR_GRP_ASSOCS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unqiue identifier | |
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | Primary unit of measure code | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| IMPLEMENTATION_DATE | DATE | Date on which engineering change order was implemented | ||
| SUBSTITUTE_COMPONENT_ID | NUMBER | Y | Substitute component inventory item | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| SUBSTITUTE_ITEM_QUANTITY | NUMBER | Y | Substitute component quantity | |
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| ACD_TYPE | NUMBER | Type to indicate add or delete on an engineering change order | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ENFORCE_INT_REQUIREMENTS | NUMBER | Enforce Integer Requirements | ||
| ENFORCE_INT_REQUIREMENTS_DESC | VARCHAR2 | (80) | Enforce Integer Requirements Description | |
| COMPONENT_ITEM_NO | VARCHAR2 | (40) |
APPS.BOM_SUBSTITUTE_COMPONENTS_ERV is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Record unqiue identifier | |
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | Primary unit of measure code | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| IMPLEMENTATION_DATE | DATE | Date on which engineering change order was implemented | ||
| SUBSTITUTE_COMPONENT_ID | NUMBER | Y | Substitute component inventory item | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| SUBSTITUTE_ITEM_QUANTITY | NUMBER | Y | Substitute component quantity | |
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| ACD_TYPE | NUMBER | Type to indicate add or delete on an engineering change order | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| ENFORCE_INT_REQUIREMENTS | NUMBER | Enforce Integer Requirements | ||
| ENFORCE_INT_REQUIREMENTS_DESC | VARCHAR2 | (80) | Enforce Integer Requirements Description |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| SUBSTITUTE_COMPONENT_ID | NUMBER | Y | Substitute component identifier | |
| ACD_TYPE | NUMBER | Change type | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Engineering change order number | |
| SUBSTITUTE_ITEM_QUANTITY | NUMBER | Y | Substitute component quantity to be used in bill | |
| IMPLEMENTATION_DATE | DATE | Implenentation date | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| COMMON_COMPONENT_SEQUENCE_ID | NUMBER | Common Component Sequence Id | ||
| ENFORCE_INT_REQUIREMENTS | NUMBER | ENFORCE_INT_REQUIREMENTS |
APPS.BOM_SUB_COMPONENTS_VIEW is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SUBSTITUTE_COMPONENT_ID | NUMBER | Y | Substitute component inventory item | |
| COMPONENT_SEQUENCE_ID | NUMBER | Y | Component unique identifier | |
| ACD_TYPE | NUMBER | Type to indicate add or delete on an engineering change order | ||
| ITEM_NUMBER | VARCHAR2 | (40) | Item number | |
| DESCRIPTION | VARCHAR2 | (240) | Description |
APPS.BOM_SUB_COMPS_QF_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row ID of table BOM_SUB_OPERATION_RESOURCEs | |
| OPERATION_SEQUENCE_ID | NUMBER | Y | Operation sequence identifier | |
| RESOURCE_CODE | VARCHAR2 | (10) | Y | Resource code |
| UOM | VARCHAR2 | (3) | Unit of measure | |
| RESOURCE_ID | NUMBER | Y | Resource identifier | |
| REPLACEMENT_GROUP_NUM | NUMBER | Y | Replacement group number | |
| ACTIVITY | VARCHAR2 | (10) | Activity | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| STANDARD_RATE_FLAG | NUMBER | Y | Standard Rate flag | |
| ASSIGNED_UNITS | NUMBER | Y | Assigned Units | |
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Usage rate or amount | |
| USAGE_RATE_OR_AMOUNT_INVERSE | NUMBER | Y | Inverse of usage rate or amount | |
| BASIS_TYPE | NUMBER | Y | Basis type | |
| SCHEDULE_FLAG | NUMBER | Y | Schedule flag | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| RESOURCE_OFFSET_PERCENT | NUMBER | Resource offset percentage | ||
| AUTOCHARGE_TYPE | NUMBER | Y | Autocharge type | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| SCHEDULE_SEQ_NUM | NUMBER | Schedule sequence number | ||
| SUBSTITUTE_GROUP_NUM | NUMBER | Y | Substitute group number | |
| PRINCIPLE_FLAG | NUMBER | Principal flag | ||
| SETUP_ID | NUMBER | Setup Id | ||
| CHANGE_NOTICE | VARCHAR2 | (10) | Change Notice | |
| ACD_TYPE | NUMBER | Acd Type | ||
| ORIGINAL_SYSTEM_REFERENCE | VARCHAR2 | (50) | Original System Reference | |
| SETUP_CODE | VARCHAR2 | (10) | Setup Code |
APPS.BOM_SUB_OPERATION_RESOURCES_V is not referenced by any database object
A Business Intelligence System view
This shows the average cost of an item in a cost group in a manufacturing organization.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LAYER_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| ITEM_COST | NUMBER | Y | ||
| MATERIAL_COST | NUMBER | |||
| MATERIAL_OVERHEAD_COST | NUMBER | |||
| OVERHEAD_COST | NUMBER | |||
| RESOURCE_COST | NUMBER | |||
| OUTSIDE_PROCESSING_COST | NUMBER | |||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (15) | ||
| COST_GROUP_ID | NUMBER | Y | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_AVERAGE_ITEM_COSTS is not referenced by any database object
A Business Intelligence System view
This shows the five seeded cost elements and their corresponding expenditure types.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_ELEMENT_ID | NUMBER | Y | ||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | Y | |
| EXPENDITURE_TRANSFER_IN_TYPE | VARCHAR2 | (30) | ||
| EXPENDITURE_TRANSFER_OUT_TYPE | VARCHAR2 | (30) | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y |
APPS.CSTBV_COST_ELEMENTS is not referenced by any database object
A Business Intelligence System view
This shows information about cost groups. Cost groups are used to group project related costs.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_GROUP_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | |||
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| DISABLE_DATE | DATE | |||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | ||
| MATERIAL_ACCOUNT | NUMBER | |||
| MATERIAL_OVERHEAD_ACCOUNT | NUMBER | |||
| RESOURCE_ACCOUNT | NUMBER | |||
| OVERHEAD_ACCOUNT | NUMBER | |||
| OUTSIDE_PROCESSING_ACCOUNT | NUMBER | |||
| AVERAGE_COST_VARIANCE_ACCOUNT | NUMBER | |||
| ENCUMBRANCE_ACCOUNT | NUMBER | |||
| PAYBACK_MAT_VAR_ACCOUNT | NUMBER | |||
| PAYBACK_RES_VAR_ACCOUNT | NUMBER | |||
| PAYBACK_OSP_VAR_ACCOUNT | NUMBER | |||
| PAYBACK_MOH_VAR_ACCOUNT | NUMBER | |||
| PAYBACK_OVH_VAR_ACCOUNT | NUMBER | |||
| LEGAL_ENTITY | NUMBER | |||
| COST_GROUP_TYPE_ID | NUMBER | |||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_COST_GROUPS is not referenced by any database object
A Business Intelligence System view
It shows the organization assignment
information for Periodic Costing. In Periodic Costing, various cost_groups belong to a
legal_entity. They act as place-holders for organizations, and groups of organizations
within a cost_group can be costed as a group, for legal reporting. The
organizations all belong to the same legal entity.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_GROUP_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_COST_GROUP_ASSIGNMENTS is not referenced by any database object
A Business Intelligence System view
This shows information about all available cost types, both organization specific and multi-org.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | |||
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | ||
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| DEFAULT_COST_TYPE | VARCHAR2 | (10) | Y | |
| _LA:BOM_SNAPSHOT_FLAG | CHAR | (55) | ||
| _LA:PL_ELEMENT_FLAG | CHAR | (53) | ||
| _LA:PL_RESOURCE_FLAG | CHAR | (54) | ||
| _LA:PL_OPERATION_FLAG | CHAR | (55) | ||
| _LA:PL_ACTIVITY_FLAG | CHAR | (54) | ||
| _LA:COMPONENT_YIELD_FLAG | CHAR | (58) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| _LA:ALLOW_UPDATES_FLAG | CHAR | (56) | ||
| DISABLE_DATE | DATE | |||
| _LA:AVAILABLE_TO_ENG_FLAG | CHAR | (59) | ||
| MULTI_ORG_FLAG | VARCHAR2 | (3) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y |
APPS.CSTBV_COST_TYPES is not referenced by any database object
A Business Intelligence System view
This shows records for every standard cost update performed.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| UPDATE_DATE | DATE | |||
| COST_TYPE_ID | NUMBER | Y | ||
| SINGLE_ITEM | NUMBER | |||
| CATEGORY_ID | NUMBER | |||
| CATEGORY_SET_ID | NUMBER | |||
| INV_ADJUSTMENT_ACCOUNT | NUMBER | |||
| _LA:STATUS | CHAR | (56) | ||
| DESCRIPTION | VARCHAR2 | (240) | Y | |
| _LA:RANGE_OPTION | CHAR | (54) | ||
| _LA:UPDT_RESOURCE_OVHD_FLAG | CHAR | (63) | ||
| _LA:UPDATE_ACTIVITY_FLAG | CHAR | (58) | ||
| _LA:SNAPSHOT_SAVED_FLAG | CHAR | (57) | ||
| ITEM_RANGE_LOW | VARCHAR2 | (240) | ||
| ITEM_RANGE_HIGH | VARCHAR2 | (240) | ||
| INVENTORY_ADJUSTMENT_VALUE | NUMBER | |||
| INTRANSIT_ADJUSTMENT_VALUE | NUMBER | |||
| WIP_ADJUSTMENT_VALUE | NUMBER | |||
| SCRAP_ADJUSTMENT_VALUE | NUMBER | |||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y |
APPS.CSTBV_ITEM_STD_COST_UPDATES is not referenced by any database object
A Business Intelligence System view
This shows, for every item, historical information for standard cost updates.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| LAST_COST_UPDATE_ID | NUMBER | |||
| STANDARD_COST_REVISION_DATE | DATE | Y | ||
| STANDARD_COST | NUMBER | Y | ||
| INVENTORY_ADJUSTMENT_QUANTITY | NUMBER | |||
| INVENTORY_ADJUSTMENT_VALUE | NUMBER | |||
| INTRANSIT_ADJUSTMENT_QUANTITY | NUMBER | |||
| INTRANSIT_ADJUSTMENT_VALUE | NUMBER | |||
| WIP_ADJUSTMENT_QUANTITY | NUMBER | |||
| WIP_ADJUSTMENT_VALUE | NUMBER | |||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (16) | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y |
APPS.CSTBV_ITEM_STD_COST_UPDT_HIST is not referenced by any database object
A Business Intelligence System view
This shows the detailed adjustments made to the standard cost of inventory, intransit, and Work in Process transactions for each standard cost update performed.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | ||
| COST_ELEMENT_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | |||
| WIP_ENTITY_ID | NUMBER | |||
| SUBINVENTORY | VARCHAR2 | (10) | ||
| OPERATION_SEQ_NUM | NUMBER | |||
| FROM_ORGANIZATION_ID | NUMBER | |||
| TO_ORGANIZATION_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | |||
| RESOURCE_ID | NUMBER | |||
| _LA:TRANSACTION_TYPE | CHAR | (66) | ||
| ADJUSTMENT_QUANTITY | NUMBER | Y | ||
| OLD_UNIT_COST | NUMBER | Y | ||
| NEW_UNIT_COST | NUMBER | Y | ||
| _LA:LEVEL_TYPE | CHAR | (51) | ||
| IN_OUT_FLAG | NUMBER | |||
| RESOURCE_SEQ_ID | NUMBER | |||
| RESOURCE_SEQ_NUM | NUMBER | |||
| _LA:STANDARD_RATE_FLAG | CHAR | (59) | ||
| TRANSACTION_ID | NUMBER | |||
| _LA:BASIS_TYPE | CHAR | (50) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| COST_UPDATE_DESCRIPTION | VARCHAR2 | (240) | Y | |
| COST_ELEMENT_NAME | VARCHAR2 | (50) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (16) | ||
| WIP_ENTITY_NAME | VARCHAR2 | (240) | ||
| FROM_ORG_CODE | VARCHAR2 | (3) | ||
| FROM_ORG_NAME | VARCHAR2 | (240) | ||
| TO_ORG_CODE | VARCHAR2 | (3) | ||
| TO_ORG_NAME | VARCHAR2 | (240) | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y |
APPS.CSTBV_ITEM_STD_CST_UPDATE_ADJ is not referenced by any database object
A Business Intelligence System view
This shows detailed cost information -- including costs by subelement, level, department, operation and activity -- for items of a given cost type.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| COST_TYPE_ID | NUMBER | Y | ||
| ITEM_UNITS | NUMBER | |||
| ACTIVITY_UNITS | NUMBER | |||
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | ||
| BASIC_FACTOR | NUMBER | Y | ||
| NET_YIELD_OR_SHRINKAGE_FACTOR | NUMBER | Y | ||
| _LA:BASIS_TYPE | CHAR | (48) | ||
| ITEM_COST | NUMBER | Y | ||
| _LA:LEVEL_TYPE | CHAR | (48) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (15) | ||
| COST_TYPE | VARCHAR2 | (10) | Y | |
| COST_ELEMENT_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | |||
| ACTIVITY_ID | NUMBER | |||
| RESOURCE_ID | NUMBER | |||
| BASIS_RESOURCE_ID | NUMBER | |||
| OPERATION_SEQUENCE_ID | NUMBER | |||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_ITEM_UNIT_COST_DETAILS is not referenced by any database object
A Business Intelligence System view
This shows the detailed average cost of items, by element and level, for a particular cost group.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| _LA:LEVEL | CHAR | (48) | ||
| ITEM_COST | NUMBER | Y | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (15) | ||
| COST_GROUP | VARCHAR2 | (10) | Y | |
| COST_ELEMENT_NAME | VARCHAR2 | (50) | Y | |
| LEVEL_TYPE | NUMBER | Y | ||
| COST_ELEMENT_ID | NUMBER | Y | ||
| LAYER_ID | NUMBER | Y | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_ITM_CST_GRP_UNT_CST_DTL is not referenced by any database object
A Business Intelligence System view
This shows the elemental item cost history for every standard cost update.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| COST_ELEMENT_ID | NUMBER | Y | ||
| STANDARD_COST | NUMBER | |||
| COST_UPDATE_DESCRIPTION | VARCHAR2 | (240) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (16) | ||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | Y | |
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y |
APPS.CSTBV_ITM_STD_CST_UPD_ELM_HST is not referenced by any database object
A Business Intelligence System view
This view shows the legal entity and cost type assignment
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY | NUMBER | (15) | Y | |
| COST_TYPE_ID | NUMBER | Y | ||
| LEGAL_ENTITY_NAME | VARCHAR2 | (240) | Y | |
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| LEDGER_ID | NUMBER | (15) | Y | |
| PRIMARY_COST_METHOD_ID | NUMBER | Y | ||
| PAC_RATES_COST_TYPE_ID | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_LE_COST_TYPES is not referenced by any database object
A Business Intelligence System view
This shows information about manufacturing activities that are either organization specific or common to all organizations.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACTIVITY_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | |||
| ACTIVITY_NAME | VARCHAR2 | (10) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | Y | |
| _LA:DEFAULT_BASIS_TYPE | CHAR | (55) | ||
| INACTIVE_DATE | DATE | |||
| ACTIVITY_MEASURE_UNIT | VARCHAR2 | (50) | ||
| ACTIVITY_ADDS_VALUE_FLAG | VARCHAR2 | (150) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_MANUFACTURING_ACTIVITIES is not referenced by any database object
A Business Intelligence System view
This shows information about each batch that has been posted from manufacturing to Oracle General Ledger.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | ||
| GL_BATCH_ID | NUMBER | Y | ||
| DESCRIPTION | VARCHAR2 | (50) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ACCT_PERIOD_ID | NUMBER | Y | ||
| GL_BATCH_DATE | DATE | Y | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_MANUFACTURING_GL_BATCH is not referenced by any database object
A Business Intelligence System view
This shows information about material subelements.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| DISABLE_DATE | DATE | |||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | ||
| _LA:DEFAULT_BASIS_TYPE | CHAR | (55) | ||
| _LA:COST_CODE_TYPE | CHAR | (60) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| DEFAULT_ACTIVITY_ID | NUMBER | |||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_MATL_COST_SUB_ELEMENT is not referenced by any database object
A Business Intelligence System view
This shows information about material overhead subelements.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| DISABLE_DATE | DATE | |||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | ||
| _LA:DEFAULT_BASIS_TYPE | CHAR | (55) | ||
| _LA:COST_CODE_TYPE | CHAR | (60) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| DEFAULT_ACTIVITY_ID | NUMBER | |||
| ABSORPTION_ACCOUNT | NUMBER | |||
| RATE_VARIANCE_ACCOUNT | NUMBER | |||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_MATL_OVHD_CST_SUB_ELMNT is not referenced by any database object
A Business Intelligence System view
This shows the accounting distributions for material transactions performed in Oracle Inventory.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_DATE | DATE | Y | ||
| TRANSACTION_VALUE | NUMBER | |||
| PRIMARY_QUANTITY | NUMBER | |||
| BASE_TRANSACTION_VALUE | NUMBER | Y | ||
| RATE_OR_AMOUNT | NUMBER | |||
| _LA:ACCOUNTING_LINE_TYPE | CHAR | (73) | ||
| _LA:BASIS_TYPE | CHAR | (48) | ||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| RESOURCE_ID | NUMBER | |||
| ACTIVITY_ID | NUMBER | |||
| REFERENCE_ACCOUNT | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| GL_BATCH_ID | NUMBER | |||
| REPETITIVE_SCHEDULE_ID | NUMBER | |||
| TRANSACTION_ID | NUMBER | |||
| OFFSET_ACCOUNT | NUMBER | Y | ||
| COST_ELEMENT_ID | NUMBER | |||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| TXN_SOURCE_ID | NUMBER | Y | ||
| _LA:TXN_SOURCE_TYPE | CHAR | (70) | ||
| ENCUMBRANCE_TYPE_ID | NUMBER | |||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER |
APPS.CSTBV_MATL_TXN_DISTRIBUTIONS is not referenced by any database object
A Business Intelligence System view
This shows all open and closed inventory accounting periods for every organization.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | ||
| ACCT_PERIOD_ID | NUMBER | Y | ||
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | |
| PERIOD_NAME | VARCHAR2 | (15) | Y | |
| PERIOD_YEAR | NUMBER | Y | ||
| PERIOD_NUM | NUMBER | Y | ||
| PERIOD_START_DATE | DATE | Y | ||
| PERIOD_CLOSE_DATE | DATE | |||
| SCHEDULE_CLOSE_DATE | DATE | Y | ||
| OPEN_FLAG | VARCHAR2 | (1) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_MFG_ACCTG_PERIOD is not referenced by any database object
A Business Intelligence System view
This shows the activity costs for a given cost type.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACTIVITY_ID | NUMBER | Y | ||
| COST_TYPE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| TOTAL_COST | NUMBER | |||
| TOTAL_ACTIVITY_UNITS | NUMBER | |||
| UNIT_COST | NUMBER | |||
| ACTIVITY_NAME | VARCHAR2 | (10) | Y | |
| COST_TYPE | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_MFG_ACTIVITY_COSTS is not referenced by any database object
A Business Intelligence System view
This shows the overhead rates or amounts associated with departments by cost type.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| OVERHEAD_ID | NUMBER | Y | ||
| _LA:UNIT_BASIS | CHAR | (48) | ||
| RATE_OR_AMOUNT | NUMBER | Y | ||
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| DEPARTMENT_NAME | VARCHAR2 | (10) | Y | |
| OVERHEAD_NAME | VARCHAR2 | (10) | Y | |
| ORGANIZATION_ID | NUMBER | Y | ||
| ACTIVITY_ID | NUMBER | |||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_MFG_DEPARTMENT_OVERHEADS is not referenced by any database object
A Business Intelligence System view
This shows the resource and outside processing resource unit costs.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | ||
| RESOURCE_ID | NUMBER | Y | ||
| RESOURCE_RATE | NUMBER | Y | ||
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| RESOURCE_NAME | VARCHAR2 | (10) | Y | |
| ORGANIZATION_ID | NUMBER | Y | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_MFG_RESOURCE_COSTS is not referenced by any database object
A Business Intelligence System view
This shows resource-based overhead associations.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | ||
| RESOURCE_ID | NUMBER | Y | ||
| OVERHEAD_ID | NUMBER | Y | ||
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| RESOURCE_NAME | VARCHAR2 | (10) | Y | |
| OVERHEAD_NAME | VARCHAR2 | (10) | Y | |
| ORGANIZATION_ID | NUMBER | Y | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_MFG_RESOURCE_OVERHEADS is not referenced by any database object
A Business Intelligence System view
This shows the distribution information for Oracle Work in Process transactions.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OVERHEAD_BASIS_FACTOR | NUMBER | The resource value or resource units the overhead is based upon | ||
| TRANSACTION_DATE | DATE | Y | Date transaction was performed | |
| TRANSACTION_VALUE | NUMBER | WIP cost transaction value in transaction currency | ||
| PRIMARY_QUANTITY | NUMBER | Resource units transacted or item units moved in terms of primaryUOM | ||
| BASE_TRANSACTION_VALUE | NUMBER | Y | WIP cost transaction value in functional currency | |
| RATE_OR_AMOUNT | NUMBER | Rate or amount per basis for overhead | ||
| _LA:ACCOUNTING_LINE_TYPE | CHAR | (73) | Type of accounting distribution | |
| _LA:BASIS_TYPE | CHAR | (48) | Basis for the resource, overhead | |
| CURRENCY_CODE | VARCHAR2 | (15) | The transaction currency code | |
| CURRENCY_CONVERSION_DATE | DATE | The date the currency conversion rate is used | ||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (10) | The rate of converting transaction currency into functional currency | |
| CURRENCY_CONVERSION_RATE | NUMBER | The rate of converting transaction currency into functional currency | ||
| RESOURCE_ID | NUMBER | Resource or sub-element identifier | ||
| ACTIVITY_ID | NUMBER | Activity identfier | ||
| REFERENCE_ACCOUNT | NUMBER | Y | Transaction distribution account | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| GL_BATCH_ID | NUMBER | Source General Ledger transaction journal entry batch | ||
| WIP_ENTITY_ID | NUMBER | Y | Charged entity identifier (job or schedule number) | |
| REPETITIVE_SCHEDULE_ID | NUMBER | WIP repetitive schedule identifier | ||
| TRANSACTION_ID | NUMBER | Y | Transaction identifier | |
| OFFSET_ACCOUNT | NUMBER | This id plus transaction_id identifies a set of contra accounts | ||
| BASIS_RESOURCE_ID | NUMBER | Resource identifier for the resource overhead is based on | ||
| COST_ELEMENT_ID | NUMBER | Cost element identifier | ||
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column |
APPS.CSTBV_MFG_TXN_DISTRIBUTIONS is not referenced by any database object
A Business Intelligence System view
This shows the item cost and quantity in a period and cost group. The quantity and cost are computed by summarizing the transactions belonging to a particular cost group in one period.
The COST_LAYER_ID is unique for a period / cost group / item combination.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_LAYER_ID | NUMBER | Y | ||
| PAC_PERIOD_ID | NUMBER | Y | ||
| COST_GROUP_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| BUY_QUANTITY | NUMBER | |||
| MAKE_QUANTITY | NUMBER | |||
| ISSUE_QUANTITY | NUMBER | |||
| TOTAL_LAYER_QUANTITY | NUMBER | |||
| ITEM_COST | NUMBER | |||
| ITEM_BUY_COST | NUMBER | |||
| ITEM_MAKE_COST | NUMBER | |||
| BEGIN_ITEM_COST | NUMBER | |||
| MATERIAL_COST | NUMBER | |||
| MATERIAL_OVERHEAD_COST | NUMBER | |||
| RESOURCE_COST | NUMBER | |||
| OVERHEAD_COST | NUMBER | |||
| OUTSIDE_PROCESSING_COST | NUMBER | |||
| UNBURDENED_COST | NUMBER | |||
| BURDEN_COST | NUMBER | |||
| PAC_PERIOD_NAME | VARCHAR2 | (15) | Y | |
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| _KF:ITEM_NAME | CHAR | (15) | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_PAC_ITEM_COSTS is not referenced by any database object
A Business Intelligence System view
This shows the details of the cost of an item in a period and cost group. The costs are stored by element and level.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_LAYER_ID | NUMBER | Y | ||
| COST_ELEMENT_ID | NUMBER | Y | ||
| LEVEL_TYPE_ID | NUMBER | Y | ||
| PAC_PERIOD_ID | NUMBER | Y | ||
| COST_GROUP_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| ITEM_COST | NUMBER | Y | ||
| ITEM_BUY_COST | NUMBER | |||
| ITEM_MAKE_COST | NUMBER | |||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | Y | |
| _LA:LEVEL_TYPE | CHAR | (50) | ||
| PAC_PERIOD_NAME | VARCHAR2 | (15) | Y | |
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| _KF:ITEM_NAME | CHAR | (15) | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_PAC_ITEM_COST_DETAILS is not referenced by any database object
A Business Intelligence System view
This shows information about periodic costing open and closed periods for each legal entity and cost groups combination.
This information is entered by using the Define Periodic Costing Accounting Periods window in Oracle Cost Management.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PAC_PERIOD_ID | NUMBER | Y | ||
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | |
| PERIOD_START_DATE | DATE | Y | ||
| PERIOD_END_DATE | DATE | Y | ||
| OPEN_FLAG | VARCHAR2 | (1) | Y | |
| PERIOD_YEAR | NUMBER | Y | ||
| PERIOD_NUM | NUMBER | Y | ||
| PERIOD_NAME | VARCHAR2 | (15) | Y | |
| PERIOD_CLOSE_DATE | DATE | |||
| LEGAL_ENTITY | NUMBER | (15) | Y | |
| COST_TYPE_ID | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_PAC_PERIODS is not referenced by any database object
A Business Intelligence System view
CSTBV_PAC_PERIOD_BALANCES stores the WIP balances for all entities within
a cost group by period.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PAC_PERIOD_ID | NUMBER | Y | ||
| WIP_ENTITY_ID | NUMBER | Y | ||
| LINE_ID | NUMBER | |||
| OPERATION_SEQ_NUM | NUMBER | Y | ||
| COST_GROUP_ID | NUMBER | Y | ||
| COST_TYPE_ID | NUMBER | Y | ||
| OPERATION_COMPLETED_UNITS | NUMBER | |||
| RELIEVED_ASSEMBLY_UNITS | NUMBER | |||
| TL_RESOURCE_IN | NUMBER | |||
| TL_RESOURCE_OUT | NUMBER | |||
| TL_OUTSIDE_PROCESSING_IN | NUMBER | |||
| TL_OUTSIDE_PROCESSING_OUT | NUMBER | |||
| TL_OVERHEAD_IN | NUMBER | |||
| TL_OVERHEAD_OUT | NUMBER | |||
| PL_MATERIAL_IN | NUMBER | |||
| PL_MATERIAL_OUT | NUMBER | |||
| PL_RESOURCE_IN | NUMBER | |||
| PL_RESOURCE_OUT | NUMBER | |||
| PL_OVERHEAD_IN | NUMBER | |||
| PL_OVERHEAD_OUT | NUMBER | |||
| PL_OUTSIDE_PROCESSING_IN | NUMBER | |||
| PL_OUTSIDE_PROCESSING_OUT | NUMBER | |||
| PL_MATERIAL_OVERHEAD_IN | NUMBER | |||
| PL_MATERIAL_OVERHEAD_OUT | NUMBER | |||
| TL_RESOURCE_VAR | NUMBER | |||
| TL_OUTSIDE_PROCESSING_VAR | NUMBER | |||
| TL_OVERHEAD_VAR | NUMBER | |||
| PL_MATERIAL_VAR | NUMBER | |||
| PL_MATERIAL_OVERHEAD_VAR | NUMBER | |||
| PL_RESOURCE_VAR | NUMBER | |||
| PL_OUTSIDE_PROCESSING_VAR | NUMBER | |||
| PL_OVERHEAD_VAR | NUMBER | |||
| PAC_PERIOD_NAME | VARCHAR2 | (15) | ||
| WIP_ENTITY_NAME | VARCHAR2 | (240) | ||
| REPETITIVE_SCHEDULE_NAME | VARCHAR2 | (10) | ||
| COST_GROUP_NAME | VARCHAR2 | (10) | ||
| COST_TYPE_NAME | VARCHAR2 | (10) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| WIP_ENTITY_TYPE | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_PAC_PERIOD_BALANCES is not referenced by any database object
A Business Intelligence System view
This shows the layer quantity of an item by period.
The QUANTITY_LAYER_ID is unique for a period and cost layer combination. In periodic LIFO method, multiple layer may exist in the same period. On the other hand, only one layer exists in each period for periodic weighted average costing method.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| QUANTITY_LAYER_ID | NUMBER | Y | ||
| COST_LAYER_ID | NUMBER | Y | ||
| PAC_PERIOD_ID | NUMBER | Y | ||
| COST_GROUP_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| LAYER_QUANTITY | NUMBER | |||
| BEGIN_LAYER_QUANTITY | NUMBER | |||
| PAC_PERIOD_NAME | VARCHAR2 | (15) | Y | |
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| _KF:ITEM_NAME | CHAR | (15) | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_PAC_QUANTITY_LAYERS is not referenced by any database object
A Business Intelligence System view
This shows the period-end quantities, costs, and values by subinventory, item, and cost group for manufacturing average cost organizations.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCT_PERIOD_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| SECONDARY_INVENTORY | VARCHAR2 | (10) | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| COST_GROUP_ID | NUMBER | |||
| PERIOD_END_QUANTITY | NUMBER | |||
| PERIOD_END_UNIT_COST | NUMBER | |||
| COST_GROUP | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ACCT_PERIOD_NAME | VARCHAR2 | (15) | Y | |
| SECONDARY_INVENTORY_DESC | VARCHAR2 | (50) | ||
| _KF:ITEM_NUMBER:_CO | CHAR | (15) | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_PERIOD_CLOSE_DTL_BAL is not referenced by any database object
A Business Intelligence System view
This shows the inventory value in each subinventory at the end of a period.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCT_PERIOD_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| SECONDARY_INVENTORY | VARCHAR2 | (10) | ||
| INVENTORY_TYPE | VARCHAR2 | (80) | Y | |
| INVENTORY_VALUE | NUMBER | Y | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ACCT_PERIOD_NAME | VARCHAR2 | (15) | Y | |
| SECONDARY_INVENTORY_DESC | VARCHAR2 | (50) | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_PERIOD_CLOSE_SUMM_BAL is not referenced by any database object
A Business Intelligence System view
This shows valuation, variance, and analytical expense accounts for each product line.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CATEGORY_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| COST_GROUP_ID | NUMBER | |||
| _KF:CATEGORY_NAME:_CO | CHAR | (15) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| SUBINVENTORY_NAME | VARCHAR2 | (10) | ||
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| CATEGORY_SET_ID | NUMBER | |||
| MATERIAL_ACCOUNT | NUMBER | |||
| MATERIAL_OVERHEAD_ACCOUNT | NUMBER | |||
| RESOURCE_ACCOUNT | NUMBER | |||
| OUTSIDE_PROCESSING_ACCOUNT | NUMBER | |||
| OVERHEAD_ACCOUNT | NUMBER | |||
| EXPENSE_ACCOUNT | NUMBER | |||
| ENCUMBRANCE_ACCOUNT | NUMBER | |||
| BRIDGING_ACCOUNT | NUMBER | |||
| ANALYTICAL_IPV | NUMBER | |||
| ANALYTICAL_PO_MIRROR | NUMBER | |||
| NON_INVOICED_SALES_ORDER | NUMBER | |||
| NON_INVOICED_REVENUE | NUMBER | |||
| ANALYTICAL_REVENUE_MIRROR | NUMBER | |||
| ANALYTICAL_MOGS | NUMBER | |||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_PRODUCT_LINE_ACCOUNT is not referenced by any database object
A Business Intelligence System view
This shows periodic acquisition cost summary for each receipt for an organization cost group and cost type.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| HEADER_ID | NUMBER | Y | ||
| COST_GROUP_ID | NUMBER | Y | ||
| COST_TYPE_ID | NUMBER | Y | ||
| PAC_PERIOD_ID | NUMBER | Y | ||
| RCV_TRANSACTION_ID | NUMBER | Y | ||
| NET_QUANTITY_RECEIVED | NUMBER | |||
| TOTAL_QUANTITY_INVOICED | NUMBER | |||
| QUANTITY_AT_PO_PRICE | NUMBER | |||
| TOTAL_INVOICE_AMOUNT | NUMBER | |||
| AMOUNT_AT_PO_PRICE | NUMBER | |||
| TOTAL_AMOUNT | NUMBER | |||
| COSTED_QUANTITY | NUMBER | |||
| ACQUISITION_COST | NUMBER | |||
| PO_UNIT_PRICE | NUMBER | |||
| PRIMARY_UOM | VARCHAR2 | (3) | ||
| REC_EXCHG_RATE | NUMBER | |||
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| PAC_PERIOD_NAME | VARCHAR2 | (15) | Y | |
| RECEIVING_TXN_TYPE | VARCHAR2 | (25) | Y | |
| RECEIVING_TXN_DATE | DATE | Y | ||
| PO_LINE_LOCATION_ID | NUMBER | |||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_RCV_ACQ_COSTS is not referenced by any database object
A Business Intelligence System view
This shows the details of the periodic acquisition cost.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| HEADER_ID | NUMBER | Y | ||
| DETAIL_ID | NUMBER | Y | ||
| SOURCE_TYPE | VARCHAR2 | (10) | ||
| LEVEL_NUM | NUMBER | |||
| AMOUNT | NUMBER | |||
| QUANTITY | NUMBER | |||
| PRICE | NUMBER | |||
| LINE_TYPE | VARCHAR2 | (25) | ||
| DISTRIBUTION_NUM | NUMBER | |||
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| PAC_PERIOD_NAME | VARCHAR2 | (15) | Y | |
| RECEIVING_TXN_TYPE | VARCHAR2 | (25) | Y | |
| RECEIVING_TXN_DATE | DATE | Y | ||
| IMMED_PARENT_INVOICE_NUM | VARCHAR2 | (50) | ||
| INVOICE_NUMBER | VARCHAR2 | (50) | ||
| TOP_PARENT_INVOICE_NUM | VARCHAR2 | (50) | ||
| IMMED_PARENT_DIST_LINE_NUM | NUMBER | (15) | ||
| DISTRIBUTION_LINE_NUMBER | NUMBER | (15) | ||
| TOP_PARENT_DIST_LINE_NUM | NUMBER | (15) | ||
| PO_LINE_LOCATION_ID | NUMBER | |||
| PARENT_DISTRIBUTION_ID | NUMBER | |||
| INVOICE_DISTRIBUTION_ID | NUMBER | (15) | ||
| PARENT_INVOICE_DIST_ID | NUMBER | |||
| COST_GROUP_ID | NUMBER | Y | ||
| COST_TYPE_ID | NUMBER | Y | ||
| PAC_PERIOD_ID | NUMBER | Y | ||
| RCV_TRANSACTION_ID | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_RCV_ACQ_COST_DETAILS is not referenced by any database object
A Business Intelligence System view
This shows information about overhead cost subelements.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| DISABLE_DATE | DATE | |||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| DEFAULT_ACTIVITY_ID | NUMBER | |||
| _LA:DEFAULT_BASIS_TYPE | CHAR | (55) | ||
| _LA:COST_CODE_TYPE | CHAR | (60) | ||
| ABSORPTION_ACCOUNT | NUMBER | |||
| RATE_VARIANCE_ACCOUNT | NUMBER | |||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_RTNG_OVHD_CST_SUB_ELMNT is not referenced by any database object
A Business Intelligence System view
This shows item unit costs, costs by element, and item cost control information by cost type.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| COST_TYPE_ID | NUMBER | Y | ||
| ITEM_COST | NUMBER | |||
| MATERIAL_COST | NUMBER | |||
| MATERIAL_OVERHEAD_COST | NUMBER | |||
| OVERHEAD_COST | NUMBER | |||
| RESOURCE_COST | NUMBER | |||
| OUTSIDE_PROCESSING_COST | NUMBER | |||
| INVENTORY_ASSET_FLAG | VARCHAR2 | (80) | Y | |
| LOT_SIZE | NUMBER | |||
| BASED_ON_ROLLUP_FLAG | VARCHAR2 | (80) | Y | |
| SHRINKAGE_RATE | NUMBER | |||
| DEFAULTED_FLAG | VARCHAR2 | (80) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (15) | ||
| COST_TYPE | VARCHAR2 | (10) | Y | |
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTBV_STANDARD_ITEM_COST is not referenced by any database object
A Business Intelligence System view
This shows the average cost of an item in a cost group in a manufacturing organization.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LAYER_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| ITEM_COST | NUMBER | Y | ||
| MATERIAL_COST | NUMBER | |||
| MATERIAL_OVERHEAD_COST | NUMBER | |||
| OVERHEAD_COST | NUMBER | |||
| RESOURCE_COST | NUMBER | |||
| OUTSIDE_PROCESSING_COST | NUMBER | |||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (15) | ||
| COST_GROUP | VARCHAR2 | (10) | Y | |
| COST_GROUP_ID | NUMBER | Y | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_AVERAGE_ITEM_COSTS is not referenced by any database object
A Business Intelligence System view
This shows the five seeded cost elements and their corresponding expenditure types.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_ELEMENT_ID | NUMBER | Y | ||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | Y | |
| EXPENDITURE_TRANSFER_IN_TYPE | VARCHAR2 | (30) | ||
| EXPENDITURE_TRANSFER_OUT_TYPE | VARCHAR2 | (30) | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y |
APPS.CSTFV_COST_ELEMENTS is not referenced by any database object
A Business Intelligence System view
This shows information about cost groups. Project cost groups are used to group project related costs. Organization cost groups are used for period average costing.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_GROUP_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | |||
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| DISABLE_DATE | DATE | |||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | ||
| LEGAL_ENTITY_NAME | VARCHAR2 | (240) | Legal Entity Name | |
| _LA:COST_GROUP_TYPE | CHAR | (63) | ||
| _DF | CHAR | (27) | ||
| MATERIAL_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:MATL:_CO | CHAR | (18) | ||
| MATERIAL_OVERHEAD_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:MTL_OVERHEAD:_CO | CHAR | (18) | ||
| RESOURCE_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:RESOURCE:_CO | CHAR | (18) | ||
| OVERHEAD_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:OVERHEAD:_CO | CHAR | (18) | ||
| OUTSIDE_PROCESSING_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:OUTSIDE_PROCS:_CO | CHAR | (18) | ||
| AVERAGE_COST_VARIANCE_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:AVG_COST_VAR:_CO | CHAR | (18) | ||
| ENCUMBRANCE_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:ENCUMBRANCE:_CO | CHAR | (18) | ||
| PAYBACK_MAT_VAR_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:PAYBK_MAT_VAR:_CO | CHAR | (18) | ||
| PAYBACK_RES_VAR_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:PAYBK_RES_VAR:_CO | CHAR | (18) | ||
| PAYBACK_OSP_VAR_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:PAYBK_OSP_VAR:_CO | CHAR | (19) | ||
| PAYBACK_MOH_VAR_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:PAYBK_MOH_VAR:_CO | CHAR | (19) | ||
| PAYBACK_OVH_VAR_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:PAYBK_OVH_VAR:_CO | CHAR | (19) | ||
| LEGAL_ENTITY | NUMBER | |||
| COST_GROUP_TYPE_ID | NUMBER | |||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_COST_GROUPS is not referenced by any database object
A Business Intelligence System view
This shows the organization assignment information for Periodic Costing. Various cost groups can belong to a legal_entity for legal cost reporting purposes.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_GROUP_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_COST_GROUP_ASSIGNMENTS is not referenced by any database object
A Business Intelligence System view
This shows information about all available cost types, both organization specific and multi-org.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | |||
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | ||
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| DEFAULT_COST_TYPE | VARCHAR2 | (10) | Y | |
| _LA:BOM_SNAPSHOT_FLAG | CHAR | (55) | ||
| _LA:PL_ELEMENT_FLAG | CHAR | (53) | ||
| _LA:PL_RESOURCE_FLAG | CHAR | (54) | ||
| _LA:PL_OPERATION_FLAG | CHAR | (55) | ||
| _LA:PL_ACTIVITY_FLAG | CHAR | (54) | ||
| _LA:COMPONENT_YIELD_FLAG | CHAR | (58) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| _LA:ALLOW_UPDATES_FLAG | CHAR | (56) | ||
| DISABLE_DATE | DATE | |||
| _LA:AVAILABLE_TO_ENG_FLAG | CHAR | (59) | ||
| MULTI_ORG_FLAG | NUMBER | |||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | ||
| ALTERNATE_DESIGNATOR_CODE | VARCHAR2 | (10) | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y |
APPS.CSTFV_COST_TYPES is not referenced by any database object
A Business Intelligence System view
This shows records for every standard cost update performed.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| UPDATE_DATE | DATE | |||
| COST_TYPE_ID | NUMBER | Y | ||
| SINGLE_ITEM | NUMBER | |||
| CATEGORY_ID | NUMBER | |||
| CATEGORY_SET_ID | NUMBER | |||
| INV_ADJUSTMENT_ACCOUNT | NUMBER | |||
| _LA:STATUS | CHAR | (56) | ||
| DESCRIPTION | VARCHAR2 | (240) | Y | |
| _LA:RANGE_OPTION | CHAR | (54) | ||
| _LA:UPDT_RESOURCE_OVHD_FLAG | CHAR | (63) | ||
| _LA:UPDATE_ACTIVITY_FLAG | CHAR | (58) | ||
| _LA:SNAPSHOT_SAVED_FLAG | CHAR | (57) | ||
| ITEM_RANGE_LOW | VARCHAR2 | (240) | ||
| ITEM_RANGE_HIGH | VARCHAR2 | (240) | ||
| INVENTORY_ADJUSTMENT_VALUE | NUMBER | |||
| INTRANSIT_ADJUSTMENT_VALUE | NUMBER | |||
| WIP_ADJUSTMENT_VALUE | NUMBER | |||
| SCRAP_ADJUSTMENT_VALUE | NUMBER | |||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (16) | ||
| _KF:CATEGORY_NAME:_CO | CHAR | (15) | ||
| CATEGORY_SET_NAME | VARCHAR2 | (30) | ||
| _KF:INV_ADJ_ACCOUNT:_CO | CHAR | (17) | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y |
APPS.CSTFV_ITEM_STD_COST_UPDATES is not referenced by any database object
A Business Intelligence System view
This shows, for every item, historical information for standard cost updates.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| LAST_COST_UPDATE_ID | NUMBER | |||
| STANDARD_COST_REVISION_DATE | DATE | Y | ||
| STANDARD_COST | NUMBER | Y | ||
| INVENTORY_ADJUSTMENT_QUANTITY | NUMBER | |||
| INVENTORY_ADJUSTMENT_VALUE | NUMBER | |||
| INTRANSIT_ADJUSTMENT_QUANTITY | NUMBER | |||
| INTRANSIT_ADJUSTMENT_VALUE | NUMBER | |||
| WIP_ADJUSTMENT_QUANTITY | NUMBER | |||
| WIP_ADJUSTMENT_VALUE | NUMBER | |||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (16) | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y |
APPS.CSTFV_ITEM_STD_COST_UPDT_HIST is not referenced by any database object
A Business Intelligence System view
This shows the detailed adjustments made to the standard cost of inventory, intransit, and Work in Process transactions for each standard cost update performed.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | ||
| COST_ELEMENT_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | |||
| WIP_ENTITY_ID | NUMBER | |||
| SUBINVENTORY | VARCHAR2 | (10) | ||
| OPERATION_SEQ_NUM | NUMBER | |||
| FROM_ORGANIZATION_ID | NUMBER | |||
| TO_ORGANIZATION_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | |||
| RESOURCE_ID | NUMBER | |||
| _LA:TRANSACTION_TYPE | CHAR | (66) | ||
| ADJUSTMENT_QUANTITY | NUMBER | Y | ||
| OLD_UNIT_COST | NUMBER | Y | ||
| NEW_UNIT_COST | NUMBER | Y | ||
| _LA:LEVEL_TYPE | CHAR | (51) | ||
| IN_OUT_FLAG | NUMBER | |||
| RESOURCE_SEQ_ID | NUMBER | |||
| RESOURCE_SEQ_NUM | NUMBER | |||
| _LA:STANDARD_RATE_FLAG | CHAR | (59) | ||
| TRANSACTION_ID | NUMBER | |||
| _LA:BASIS_TYPE | CHAR | (50) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| COST_UPDATE_DESCRIPTION | VARCHAR2 | (240) | Y | |
| COST_ELEMENT_NAME | VARCHAR2 | (50) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (16) | ||
| WIP_ENTITY_NAME | VARCHAR2 | (240) | ||
| FROM_ORG_CODE | VARCHAR2 | (3) | ||
| FROM_ORG_NAME | VARCHAR2 | (240) | ||
| TO_ORG_CODE | VARCHAR2 | (3) | ||
| TO_ORG_NAME | VARCHAR2 | (240) | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | ||
| RESOURCE_CODE | VARCHAR2 | (10) | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y |
APPS.CSTFV_ITEM_STD_CST_UPDATE_ADJ is not referenced by any database object
A Business Intelligence System view
This shows detailed cost information -- including costs by subelement, level, department, operation and activity -- for items of a given cost type.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| COST_TYPE_ID | NUMBER | Y | ||
| ITEM_UNITS | NUMBER | |||
| ACTIVITY_UNITS | NUMBER | |||
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | ||
| _LA:BASIS_TYPE | CHAR | (48) | ||
| ITEM_COST | NUMBER | Y | ||
| _LA:LEVEL_TYPE | CHAR | (48) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (15) | ||
| COST_TYPE | VARCHAR2 | (10) | Y | |
| COST_ELEMENT_NAME | VARCHAR2 | (50) | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | ||
| ACTIVITY_NAME | VARCHAR2 | (10) | ||
| RESOURCE_CODE | VARCHAR2 | (10) | ||
| BASIS_RESOURCE_CODE | VARCHAR2 | (10) | ||
| OPERATION_DESCRIPTION | VARCHAR2 | (240) | ||
| _DF | CHAR | (21) | ||
| COST_ELEMENT_ID | NUMBER | |||
| DEPARTMENT_ID | NUMBER | |||
| ACTIVITY_ID | NUMBER | |||
| RESOURCE_ID | NUMBER | |||
| BASIS_RESOURCE_ID | NUMBER | |||
| OPERATION_SEQUENCE_ID | NUMBER | |||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_ITEM_UNIT_COST_DETAILS is not referenced by any database object
A Business Intelligence System view
This shows the detailed average cost of items, by element and level, for a particular cost group.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| _LA:LEVEL | CHAR | (48) | ||
| ITEM_COST | NUMBER | Y | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (15) | ||
| COST_GROUP | VARCHAR2 | (10) | Y | |
| COST_ELEMENT_NAME | VARCHAR2 | (50) | Y | |
| LEVEL_TYPE | NUMBER | Y | ||
| COST_ELEMENT_ID | NUMBER | Y | ||
| LAYER_ID | NUMBER | Y | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_ITM_CST_GRP_UNT_CST_DTL is not referenced by any database object
A Business Intelligence System view
This shows the elemental item cost history for every standard cost update.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| COST_ELEMENT_ID | NUMBER | Y | ||
| STANDARD_COST | NUMBER | |||
| COST_UPDATE_DESCRIPTION | VARCHAR2 | (240) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (16) | ||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | Y | |
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y |
APPS.CSTFV_ITM_STD_CST_UPD_ELM_HST is not referenced by any database object
A Business Intelligence System view
This shows the legal entity and cost type assignment
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY | NUMBER | (15) | Y | |
| COST_TYPE_ID | NUMBER | Y | ||
| LEGAL_ENTITY_NAME | VARCHAR2 | (240) | Y | |
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| LEDGER_NAME | VARCHAR2 | (30) | Y | |
| _LA:PRIMARY_COST_METHOD_NAME | CHAR | (65) | ||
| PAC_RATES_COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| LEDGER_ID | NUMBER | (15) | Y | |
| PRIMARY_COST_METHOD_ID | NUMBER | Y | ||
| PAC_RATES_COST_TYPE_ID | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_LE_COST_TYPES is not referenced by any database object
A Business Intelligence System view
This shows information about manufacturing activities that are either organization specific or common to all organizations.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACTIVITY_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | |||
| ACTIVITY_NAME | VARCHAR2 | (10) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | Y | |
| _LA:DEFAULT_BASIS_TYPE | CHAR | (55) | ||
| INACTIVE_DATE | DATE | |||
| ACTIVITY_MEASURE_UNIT | VARCHAR2 | (50) | ||
| ACTIVITY_ADDS_VALUE_FLAG | VARCHAR2 | (150) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | ||
| _DF | CHAR | (25) | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_MANUFACTURING_ACTIVITIES is not referenced by any database object
A Business Intelligence System view
This shows information about each batch that has been posted from manufacturing to Oracle General Ledger.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | ||
| GL_BATCH_ID | NUMBER | Y | ||
| DESCRIPTION | VARCHAR2 | (50) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ACCOUNT_PERIOD_NAME | VARCHAR2 | (15) | Y | |
| ACCT_PERIOD_ID | NUMBER | Y | ||
| GL_BATCH_DATE | DATE | Y | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_MANUFACTURING_GL_BATCH is not referenced by any database object
A Business Intelligence System view
This shows information about material subelements.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| DISABLE_DATE | DATE | |||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | ||
| _LA:DEFAULT_BASIS_TYPE | CHAR | (55) | ||
| _LA:COST_CODE_TYPE | CHAR | (60) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ORGANIZATION_ID | NUMBER | Y | ||
| DEFAULT_ACTIVITY | VARCHAR2 | (10) | ||
| DEFAULT_ACTIVITY_ID | NUMBER | |||
| _DF | CHAR | (24) | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_MATL_COST_SUB_ELEMENT is not referenced by any database object
A Business Intelligence System view
This shows information about material overhead subelements.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| DISABLE_DATE | DATE | |||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | ||
| _LA:DEFAULT_BASIS_TYPE | CHAR | (55) | ||
| _LA:COST_CODE_TYPE | CHAR | (60) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ORGANIZATION_ID | NUMBER | Y | ||
| DEFAULT_ACTIVITY_NAME | VARCHAR2 | (10) | ||
| DEFAULT_ACTIVITY_ID | NUMBER | |||
| _KF:ACC_NO:ABSORPTION:_CO | CHAR | (18) | ||
| ABSORPTION_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:RATE_VARIANCE:_CO | CHAR | (18) | ||
| RATE_VARIANCE_ACCOUNT | NUMBER | |||
| _DF | CHAR | (24) | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_MATL_OVHD_CST_SUB_ELMNT is not referenced by any database object
A Business Intelligence System view
This shows the accounting distributions for material transactions performed in Oracle Inventory.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_DATE | DATE | Y | ||
| TRANSACTION_VALUE | NUMBER | |||
| PRIMARY_QUANTITY | NUMBER | |||
| BASE_TRANSACTION_VALUE | NUMBER | Y | ||
| RATE_OR_AMOUNT | NUMBER | |||
| _LA:ACCOUNTING_LINE_TYPE | CHAR | (73) | ||
| _LA:BASIS_TYPE | CHAR | (48) | ||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| RESOURCE_CODE | VARCHAR2 | (10) | ||
| ACTIVITY_NAME | VARCHAR2 | (10) | ||
| _KF:REFERENCE_ACCOUNT:_CO | CHAR | (17) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| GL_BATCH_DESCRIPTION | VARCHAR2 | (50) | ||
| REP_SCH_DESCRIPTION | VARCHAR2 | (240) | ||
| TRANSACTION_TYPE | NUMBER | |||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | ||
| _KF:ITEM_NUMBER:_CO | CHAR | (16) | ||
| TRANSACTION_SOURCE_TYPE_NAME | VARCHAR2 | (30) | ||
| ENCUMBRANCE_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CODE_NAME | VARCHAR2 | (80) | ||
| _LA:TXN_SOURCE_TYPE | CHAR | (70) | ||
| RESOURCE_ID | NUMBER | |||
| ACTIVITY_ID | NUMBER | |||
| REFERENCE_ACCOUNT_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| GL_BATCH_ID | NUMBER | |||
| REPETITIVE_SCHEDULE_ID | NUMBER | |||
| TRANSACTION_ID | NUMBER | |||
| OFFSET_ACCOUNT_ID | NUMBER | Y | ||
| COST_ELEMENT_ID | NUMBER | |||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| TXN_SOURCE_ID | NUMBER | Y | ||
| ENCUMBRANCE_TYPE_ID | NUMBER | |||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER |
APPS.CSTFV_MATL_TXN_DISTRIBUTIONS is not referenced by any database object
A Business Intelligence System view
This shows all open and closed inventory accounting periods for every organization.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | ||
| ACCT_PERIOD_ID | NUMBER | Y | ||
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | |
| PERIOD_NAME | VARCHAR2 | (15) | Y | |
| PERIOD_YEAR | NUMBER | Y | ||
| PERIOD_NUM | NUMBER | Y | ||
| PERIOD_START_DATE | DATE | Y | ||
| PERIOD_CLOSE_DATE | DATE | |||
| SCHEDULE_CLOSE_DATE | DATE | Y | ||
| OPEN_FLAG | VARCHAR2 | (1) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_MFG_ACCTG_PERIOD is not referenced by any database object
A Business Intelligence System view
This shows the activity costs for a given cost type.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACTIVITY_ID | NUMBER | Y | ||
| COST_TYPE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| TOTAL_COST | NUMBER | |||
| TOTAL_ACTIVITY_UNITS | NUMBER | |||
| UNIT_COST | NUMBER | |||
| ACTIVITY_NAME | VARCHAR2 | (10) | Y | |
| COST_TYPE | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _DF | CHAR | (29) | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_MFG_ACTIVITY_COSTS is not referenced by any database object
A Business Intelligence System view
This shows the overhead rates or amounts associated with departments by cost type.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | Y | ||
| OVERHEAD_ID | NUMBER | Y | ||
| _LA:UNIT_BASIS | CHAR | (48) | ||
| RATE_OR_AMOUNT | NUMBER | Y | ||
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| DEPARTMENT_NAME | VARCHAR2 | (10) | Y | |
| OVERHEAD_NAME | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ACTIVITY_NAME | VARCHAR2 | (10) | ||
| _DF | CHAR | (36) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| ACTIVITY_ID | NUMBER | |||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_MFG_DEPARTMENT_OVERHEADS is not referenced by any database object
A Business Intelligence System view
This shows the resource and outside processing resource unit costs.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | ||
| RESOURCE_ID | NUMBER | Y | ||
| RESOURCE_RATE | NUMBER | Y | ||
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| RESOURCE_NAME | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _DF | CHAR | (30) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_MFG_RESOURCE_COSTS is not referenced by any database object
A Business Intelligence System view
This shows resource-based overhead associations.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | ||
| RESOURCE_ID | NUMBER | Y | ||
| OVERHEAD_ID | NUMBER | Y | ||
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| RESOURCE_NAME | VARCHAR2 | (10) | Y | |
| OVERHEAD_NAME | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _DF | CHAR | (34) | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_MFG_RESOURCE_OVERHEADS is not referenced by any database object
A Business Intelligence System view
This shows the distribution information for Oracle Work in Process transactions.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OVERHEAD_BASIS_FACTOR | NUMBER | The resource value or resource units the overhead is based upon | ||
| TRANSACTION_DATE | DATE | Y | Date transaction was performed | |
| TRANSACTION_VALUE | NUMBER | WIP cost transaction value in transaction currency | ||
| PRIMARY_QUANTITY | NUMBER | Resource units transacted or item units moved in terms of primaryUOM | ||
| BASE_TRANSACTION_VALUE | NUMBER | Y | WIP cost transaction value in functional currency | |
| RATE_OR_AMOUNT | NUMBER | Rate or amount per basis for overhead | ||
| _LA:ACCOUNTING_LINE_TYPE | CHAR | (73) | Type of accounting distribution | |
| _LA:BASIS_TYPE | CHAR | (48) | ||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (10) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| RESOURCE_CODE | VARCHAR2 | (10) | ||
| BASIS_RESOURCE_CODE | VARCHAR2 | (10) | ||
| ACTIVITY_NAME | VARCHAR2 | (10) | ||
| _KF:REFERENCE_ACCOUNT:_CO | CHAR | (17) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| GL_BATCH_DESCRIPTION | VARCHAR2 | (50) | ||
| WIP_ENTITY_NAME | VARCHAR2 | (240) | Y | |
| REPETITIVE_SCHEDULE_DESC | VARCHAR2 | (240) | ||
| _LA:TRANSACTION_TYPE | CHAR | (64) | ||
| RESOURCE_ID | NUMBER | |||
| ACTIVITY_ID | NUMBER | |||
| REFERENCE_ACCOUNT_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| GL_BATCH_ID | NUMBER | |||
| WIP_ENTITY_ID | NUMBER | Y | ||
| REPETITIVE_SCHEDULE_ID | NUMBER | |||
| TRANSACTION_ID | NUMBER | Y | ||
| OFFSET_ACCOUNT_ID | NUMBER | |||
| BASIS_RESOURCE_ID | NUMBER | |||
| COST_ELEMENT_ID | NUMBER | |||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y |
APPS.CSTFV_MFG_TXN_DISTRIBUTIONS is not referenced by any database object
A Business Intelligence System view
This shows item cost and quantity for Period Average Costing. The quantity and cost are computed by summarizing the transactions of a particular cost group in one period.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_LAYER_ID | NUMBER | Y | Cost layer identifier | |
| PAC_PERIOD_ID | NUMBER | Y | Period identifier | |
| COST_GROUP_ID | NUMBER | Y | cost group identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | item identifier | |
| ORGANIZATION_ID | NUMBER | organization identifier | ||
| BUY_QUANTITY | NUMBER | quantity of item bought this period | ||
| MAKE_QUANTITY | NUMBER | quantity of item made this period | ||
| ISSUE_QUANTITY | NUMBER | The quantity issued in the periodic costing period. | ||
| TOTAL_LAYER_QUANTITY | NUMBER | Total quantity at the end of the period | ||
| ITEM_COST | NUMBER | Total item cost | ||
| ITEM_BUY_COST | NUMBER | The buy item cost at the end of the period. | ||
| ITEM_MAKE_COST | NUMBER | The make item cost at the end of the period. | ||
| BEGIN_ITEM_COST | NUMBER | The item cost at the beginning of the period. | ||
| MATERIAL_COST | NUMBER | Material cost | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material Overhead Cost | ||
| RESOURCE_COST | NUMBER | Resource Cost | ||
| OVERHEAD_COST | NUMBER | Overhead Cost | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside processing cost | ||
| UNBURDENED_COST | NUMBER | Item unit cost minus this level material overhead | ||
| BURDEN_COST | NUMBER | |||
| PAC_PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | Cost Group Name |
| _KF:ITEM_NAME | CHAR | (15) | Item Name | |
| CREATION_DATE | DATE | Y | creation date | |
| CREATED_BY | NUMBER | Y | created by | |
| LAST_UPDATE_DATE | DATE | Y | last update date | |
| UPDATED_BY | NUMBER | Y | updated by |
APPS.CSTFV_PAC_ITEM_COSTS is not referenced by any database object
A Business Intelligence System view
This shows the details of the cost of an item in a period and cost group. The costs are stored by element and level.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_LAYER_ID | NUMBER | Y | cost layer identifier | |
| COST_ELEMENT_ID | NUMBER | Y | cost element identifier | |
| LEVEL_TYPE_ID | NUMBER | Y | level type identifier | |
| PAC_PERIOD_ID | NUMBER | Y | period identifier | |
| COST_GROUP_ID | NUMBER | Y | cost group identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | item identifier | |
| ORGANIZATION_ID | NUMBER | organization identifier | ||
| ITEM_COST | NUMBER | Y | item elemental cost | |
| ITEM_BUY_COST | NUMBER | elemental item buy cost for this period | ||
| ITEM_MAKE_COST | NUMBER | The elemental make item cost at the end of the period | ||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | Y | cost element |
| _LA:LEVEL_TYPE | CHAR | (50) | level type | |
| PAC_PERIOD_NAME | VARCHAR2 | (15) | Y | period name |
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | cost group |
| _KF:ITEM_NAME | CHAR | (15) | item name | |
| CREATION_DATE | DATE | Y | creation date | |
| CREATED_BY | NUMBER | Y | created by | |
| LAST_UPDATE_DATE | DATE | Y | last update date | |
| UPDATED_BY | NUMBER | Y | updated by |
APPS.CSTFV_PAC_ITEM_COST_DETAILS is not referenced by any database object
A Business Intelligence System view
This shows information about periodic costing open and closed periods for each legal entity and cost groups combination.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PAC_PERIOD_ID | NUMBER | Y | Periodic Costing Period Identifier | |
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Calendar associated with Set of books |
| PERIOD_START_DATE | DATE | Y | Period Start Date | |
| PERIOD_END_DATE | DATE | Y | Period End date | |
| OPEN_FLAG | VARCHAR2 | (1) | Y | Flag to denote whether period is in open, close or error status |
| PERIOD_YEAR | NUMBER | Y | Period Year | |
| PERIOD_NUM | NUMBER | Y | Period Number | |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| PERIOD_CLOSE_DATE | DATE | Period Close date | ||
| LEGAL_ENTITY_NAME | VARCHAR2 | (240) | Y | Legal Entity Name |
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | Cost Type Name |
| LEGAL_ENTITY | NUMBER | (15) | Y | Legal Entity Identifier |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| CREATION_DATE | DATE | Y | Creation date | |
| CREATED_BY | NUMBER | Y | Created by | |
| LAST_UPDATE_DATE | DATE | Y | Last update date | |
| UPDATED_BY | NUMBER | Y | Updated by |
APPS.CSTFV_PAC_PERIODS is not referenced by any database object
A Business Intelligence System view
This shows WIP balances for all entities within a cost group by period. Values are stored by WIP entity, line and operation sequence.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PAC_PERIOD_ID | NUMBER | Y | ||
| WIP_ENTITY_ID | NUMBER | Y | ||
| LINE_ID | NUMBER | |||
| OPERATION_SEQ_NUM | NUMBER | Y | ||
| COST_GROUP_ID | NUMBER | Y | ||
| COST_TYPE_ID | NUMBER | Y | ||
| WIP_ENTITY_TYPE | NUMBER | Y | ||
| OPERATION_COMPLETED_UNITS | NUMBER | |||
| RELIEVED_ASSEMBLY_UNITS | NUMBER | |||
| TL_RESOURCE_IN | NUMBER | |||
| TL_RESOURCE_OUT | NUMBER | |||
| TL_OUTSIDE_PROCESSING_IN | NUMBER | |||
| TL_OUTSIDE_PROCESSING_OUT | NUMBER | |||
| TL_OVERHEAD_IN | NUMBER | |||
| TL_OVERHEAD_OUT | NUMBER | |||
| PL_MATERIAL_IN | NUMBER | |||
| PL_MATERIAL_OUT | NUMBER | |||
| PL_RESOURCE_IN | NUMBER | |||
| PL_RESOURCE_OUT | NUMBER | |||
| PL_OVERHEAD_IN | NUMBER | |||
| PL_OVERHEAD_OUT | NUMBER | |||
| PL_OUTSIDE_PROCESSING_IN | NUMBER | |||
| PL_OUTSIDE_PROCESSING_OUT | NUMBER | |||
| PL_MATERIAL_OVERHEAD_IN | NUMBER | |||
| PL_MATERIAL_OVERHEAD_OUT | NUMBER | |||
| TL_RESOURCE_VAR | NUMBER | |||
| TL_OUTSIDE_PROCESSING_VAR | NUMBER | |||
| TL_OVERHEAD_VAR | NUMBER | |||
| PL_MATERIAL_VAR | NUMBER | |||
| PL_MATERIAL_OVERHEAD_VAR | NUMBER | |||
| PL_RESOURCE_VAR | NUMBER | |||
| PL_OUTSIDE_PROCESSING_VAR | NUMBER | |||
| PL_OVERHEAD_VAR | NUMBER | |||
| PAC_PERIOD_NAME | VARCHAR2 | (15) | ||
| WIP_ENTITY_NAME | VARCHAR2 | (240) | ||
| REPETITIVE_SCHEDULE_NAME | VARCHAR2 | (10) | ||
| COST_GROUP_NAME | VARCHAR2 | (10) | ||
| COST_TYPE_NAME | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ORGANIZATION_ID | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_PAC_PERIOD_BALANCES is not referenced by any database object
A Business Intelligence System view
This shows the layer quantity of an item by period. A quantity layer is unique for a period and cost layer pair. In periodic LIFO, multiple layers may exist in the same period.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| QUANTITY_LAYER_ID | NUMBER | Y | Quantity layer identifier | |
| COST_LAYER_ID | NUMBER | Y | Cost layer identifier | |
| PAC_PERIOD_ID | NUMBER | Y | Period identifier | |
| COST_GROUP_ID | NUMBER | Y | Cost group identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| LAYER_QUANTITY | NUMBER | Layer quantity | ||
| BEGIN_LAYER_QUANTITY | NUMBER | quantity at the beginning of the period | ||
| PAC_PERIOD_NAME | VARCHAR2 | (15) | Y | Period name |
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | Cost Group name |
| _KF:ITEM_NAME | CHAR | (15) | Item Name | |
| CREATION_DATE | DATE | Y | Creation date | |
| CREATED_BY | NUMBER | Y | Created by | |
| LAST_UPDATE_DATE | DATE | Y | last update date | |
| UPDATED_BY | NUMBER | Y | updated by |
APPS.CSTFV_PAC_QUANTITY_LAYERS is not referenced by any database object
A Business Intelligence System view
This shows the period-end quantities, costs, and values by subinventory, item, and cost group for manufacturing average cost organizations.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCT_PERIOD_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| SECONDARY_INVENTORY | VARCHAR2 | (10) | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| COST_GROUP_ID | NUMBER | |||
| PERIOD_END_QUANTITY | NUMBER | |||
| PERIOD_END_UNIT_COST | NUMBER | |||
| COST_GROUP | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ACCT_PERIOD_NAME | VARCHAR2 | (15) | Y | |
| SECONDARY_INVENTORY_DESC | VARCHAR2 | (50) | ||
| _KF:ITEM_NUMBER:_CO | CHAR | (15) | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_PERIOD_CLOSE_DTL_BAL is not referenced by any database object
A Business Intelligence System view
This shows the inventory value in each subinventory at the end of a period.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCT_PERIOD_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| SECONDARY_INVENTORY | VARCHAR2 | (10) | ||
| INVENTORY_TYPE | VARCHAR2 | (80) | Y | |
| INVENTORY_VALUE | NUMBER | Y | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ACCT_PERIOD_NAME | VARCHAR2 | (15) | Y | |
| SECONDARY_INVENTORY_DESC | VARCHAR2 | (50) | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_PERIOD_CLOSE_SUMM_BAL is not referenced by any database object
A Business Intelligence System view
This shows valuation, variance, and analytical expense accounts for each product line.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CATEGORY_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| COST_GROUP_ID | NUMBER | |||
| _KF:CATEGORY_NAME:_CO | CHAR | (15) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| SUBINVENTORY_NAME | VARCHAR2 | (10) | ||
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| CATEGORY_SET_NAME | VARCHAR2 | (30) | ||
| CATEGORY_SET_ID | NUMBER | |||
| _KF:ACC_NO:MATL:_CO | CHAR | (18) | ||
| MATERIAL_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:MTL_OVERHEAD:_CO | CHAR | (18) | ||
| MATERIAL_OVERHEAD_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:RESOURCE:_CO | CHAR | (18) | ||
| RESOURCE_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:OUTSIDE_PROCS:_CO | CHAR | (18) | ||
| OUTSIDE_PROCESSING_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:OVERHEAD:_CO | CHAR | (18) | ||
| OVERHEAD_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:EXPENSE:_CO | CHAR | (18) | ||
| EXPENSE_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:ENCUMBRANCE:_CO | CHAR | (18) | ||
| ENCUMBRANCE_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:BRIDGING:_CO | CHAR | (18) | ||
| BRIDGING_ACCOUNT | NUMBER | |||
| ANALYTICAL_IPV | NUMBER | |||
| ANALYTICAL_PO_MIRROR | NUMBER | |||
| NON_INVOICED_SO | NUMBER | |||
| NON_INVOICED_REVENUE | NUMBER | |||
| ANALYTICAL_REVENUE_MIRROR | NUMBER | |||
| ANALYTICAL_MOGS | NUMBER | |||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_PRODUCT_LINE_ACCOUNT is not referenced by any database object
A Business Intelligence System view
This shows periodic acquisition cost summary for each receipt for an organization cost group and cost type.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| HEADER_ID | NUMBER | Y | ||
| COST_GROUP_ID | NUMBER | Y | ||
| COST_TYPE_ID | NUMBER | Y | ||
| PAC_PERIOD_ID | NUMBER | Y | ||
| RCV_TRANSACTION_ID | NUMBER | Y | ||
| NET_QUANTITY_RECEIVED | NUMBER | |||
| TOTAL_QUANTITY_INVOICED | NUMBER | |||
| QUANTITY_AT_PO_PRICE | NUMBER | |||
| TOTAL_INVOICE_AMOUNT | NUMBER | |||
| AMOUNT_AT_PO_PRICE | NUMBER | |||
| TOTAL_AMOUNT | NUMBER | |||
| COSTED_QUANTITY | NUMBER | |||
| ACQUISITION_COST | NUMBER | |||
| PO_UNIT_PRICE | NUMBER | |||
| PRIMARY_UOM | VARCHAR2 | (3) | ||
| REC_EXCHG_RATE | NUMBER | |||
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| PAC_PERIOD_NAME | VARCHAR2 | (15) | Y | |
| RECEIVING_TXN_TYPE | VARCHAR2 | (25) | Y | |
| RECEIVING_TXN_DATE | DATE | Y | ||
| PO_LINE_NUMBER | NUMBER | |||
| PO_NUMBER | VARCHAR2 | (20) | ||
| SHIPMENT_NUMBER | NUMBER | |||
| MATCH_OPTION | VARCHAR2 | (7) | ||
| SHIP_TO_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| SHIP_TO_ORGANIZATION_NAME | VARCHAR2 | (240) | ||
| PO_LINE_LOCATION_ID | NUMBER | |||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_RCV_ACQ_COSTS is not referenced by any database object
A Business Intelligence System view
This shows the details of the periodic acquisition cost.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| HEADER_ID | NUMBER | Y | ||
| DETAIL_ID | NUMBER | Y | ||
| SOURCE_TYPE | VARCHAR2 | (10) | ||
| LEVEL_NUM | NUMBER | |||
| AMOUNT | NUMBER | |||
| QUANTITY | NUMBER | |||
| PRICE | NUMBER | |||
| LINE_TYPE | VARCHAR2 | (25) | ||
| DISTRIBUTION_NUM | NUMBER | |||
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| PAC_PERIOD_NAME | VARCHAR2 | (15) | Y | |
| RECEIVING_TXN_TYPE | VARCHAR2 | (25) | Y | |
| RECEIVING_TXN_DATE | DATE | Y | ||
| IMMED_PARENT_INVOICE_NUM | VARCHAR2 | (50) | ||
| INVOICE_NUMBER | VARCHAR2 | (50) | ||
| TOP_PARENT_INVOICE_NUM | VARCHAR2 | (50) | ||
| IMMED_PARENT_DIST_LINE_NUM | NUMBER | (15) | ||
| DISTRIBUTION_LINE_NUMBER | NUMBER | (15) | ||
| TOP_PARENT_DIST_LINE_NUM | NUMBER | (15) | ||
| PO_LINE_NUMBER | NUMBER | |||
| PO_NUMBER | VARCHAR2 | (20) | ||
| SHIPMENT_NUMBER | NUMBER | |||
| MATCH_OPTION | VARCHAR2 | (7) | ||
| SHIP_TO_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| SHIP_TO_ORGANIZATION_NAME | VARCHAR2 | (240) | ||
| PO_LINE_LOCATION_ID | NUMBER | |||
| PARENT_DISTRIBUTION_ID | NUMBER | |||
| INVOICE_DISTRIBUTION_ID | NUMBER | (15) | ||
| PARENT_INVOICE_DIST_ID | NUMBER | |||
| COST_GROUP_ID | NUMBER | Y | ||
| COST_TYPE_ID | NUMBER | Y | ||
| PAC_PERIOD_ID | NUMBER | Y | ||
| RCV_TRANSACTION_ID | NUMBER | Y | ||
| TOP_PARENT_INVOICE_ID | NUMBER | (15) | ||
| INVOICE_ID | NUMBER | (15) | ||
| IMMED_PARENT_INVOICE_ID | NUMBER | (15) | ||
| PO_HEADER_ID | NUMBER | |||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_RCV_ACQ_COST_DETAILS is not referenced by any database object
A Business Intelligence System view
This shows information about overhead cost subelements.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Y | |
| DESCRIPTION | VARCHAR2 | (240) | ||
| DISABLE_DATE | DATE | |||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | ||
| _LA:DEFAULT_BASIS_TYPE | CHAR | (55) | ||
| _LA:COST_CODE_TYPE | CHAR | (60) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| ORGANIZATION_ID | NUMBER | Y | ||
| DEFAULT_ACTIVITY_NAME | VARCHAR2 | (10) | ||
| DEFAULT_ACTIVITY_ID | NUMBER | |||
| _KF:ACC_NO:ABSORPTION:_CO | CHAR | (18) | ||
| ABSORPTION_ACCOUNT | NUMBER | |||
| _KF:ACC_NO:RATE_VARIANCE:_CO | CHAR | (18) | ||
| RATE_VARIANCE_ACCOUNT | NUMBER | |||
| _DF | CHAR | (24) | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_RTNG_OVHD_CST_SUB_ELMNT is not referenced by any database object
A Business Intelligence System view
This shows item unit costs, costs by element, and item cost control information by cost type.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| COST_TYPE_ID | NUMBER | Y | ||
| ITEM_COST | NUMBER | |||
| MATERIAL_COST | NUMBER | |||
| MATERIAL_OVERHEAD_COST | NUMBER | |||
| OVERHEAD_COST | NUMBER | |||
| RESOURCE_COST | NUMBER | |||
| OUTSIDE_PROCESSING_COST | NUMBER | |||
| INVENTORY_ASSET_FLAG | VARCHAR2 | (80) | Y | |
| LOT_SIZE | NUMBER | |||
| BASED_ON_ROLLUP_FLAG | VARCHAR2 | (80) | Y | |
| SHRINKAGE_RATE | NUMBER | |||
| DEFAULTED_FLAG | VARCHAR2 | (80) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| _KF:ITEM_NUMBER:_CO | CHAR | (15) | ||
| COST_TYPE | VARCHAR2 | (10) | Y | |
| _DF | CHAR | (26) | ||
| CREATED_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| UPDATED_DATE | DATE | Y | ||
| UPDATED_BY | NUMBER | Y |
APPS.CSTFV_STANDARD_ITEM_COST is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EVENT_TYPE | VARCHAR2 | (122) | ||
| TRANSACTION_TYPE_ID | NUMBER | |||
| TRANSACTION_ACTION_ID | NUMBER | |||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | |||
| TRANSACTION_TYPE | VARCHAR2 | (30) | ||
| DESCRIPTION | VARCHAR2 | (80) | ||
| TRANSACTION_TYPE_FLAG | CHAR | (3) |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | (15) | Y | Inventory Organization Identifier |
| LEDGER_ID | NUMBER | Ledger Identifier | ||
| LEGAL_ENTITY | NUMBER | Legal Entity | ||
| OPERATING_UNIT | NUMBER | Operating Unit |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | ||
| ACTIVITY_ID | NUMBER | Y | Activity identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ACTIVITY | VARCHAR2 | (10) | Y | Activity name |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| MULTIPLE_ORG_FLAG | NUMBER | Organization identifier | ||
| DESCRIPTION | VARCHAR2 | (240) | Y | Description |
| DEFAULT_BASIS_TYPE | NUMBER | Default basis for the activity | ||
| BASIS | VARCHAR2 | (80) | ||
| DISABLE_DATE | DATE | Disable date | ||
| OUTPUT_UOM | VARCHAR2 | (50) | Activity measurement unit | |
| VALUE_ADDED_ACTIVITY_FLAG | VARCHAR2 | (150) | Flag indicating whether the activity adds value | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
APPS.CST_ACTIVITIES_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACTIVITY_ID | NUMBER | Y | Activity identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ACTIVITY | VARCHAR2 | (10) | Y | Activity name |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| DESCRIPTION | VARCHAR2 | (240) | Y | Description |
| DEFAULT_BASIS_TYPE | NUMBER | Default basis for the activity | ||
| DISABLE_DATE | DATE | Disable date | ||
| OUTPUT_UOM | VARCHAR2 | (50) | Activity measurement unit | |
| VALUE_ADDED_ACTIVITY_FLAG | VARCHAR2 | (150) | Flag indicating whether the activity adds value | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who column | ||
| PROGRAM_ID | NUMBER | Concurrent who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent who column |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row Identifier | |
| ACTIVITY_ID | NUMBER | Y | Activity identifier | |
| ACTIVITY | VARCHAR2 | (10) | Y | Activity name |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| COST_TYPE | VARCHAR2 | (10) | Y | Cost type name |
| COST_TYPE_DESCRIPTION | VARCHAR2 | (240) | Description | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ALLOW_UPDATES_FLAG | NUMBER | Whether the costs defined for this cost type can be changed | ||
| TOTAL_ACTIVITY_UNITS | NUMBER | The total expected number of activity occurances | ||
| TOTAL_COST | NUMBER | Total expected cost for the activity | ||
| UNIT_COST | NUMBER | Total unit cost | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
APPS.CST_ACTIVITY_COSTS_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | VARCHAR2 | (0) | Unused | |
| OPERATION_SEQUENCE_ID | VARCHAR2 | (0) | Unused | |
| DEPARTMENT_ID | VARCHAR2 | (0) | Unused | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| RESOURCE_ID | VARCHAR2 | (0) | Unused | |
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | VARCHAR2 | (0) | Unused | |
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (10) | Activity name | |
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN1_VALUE_2B | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2B | VARCHAR2 | (10) | Activity name | |
| DESCRIPTION_COLUMN | VARCHAR2 | (240) | Description | |
| GUI_COLUMN1 | VARCHAR2 | (0) | Unused | |
| GUI_COLUMN2 | VARCHAR2 | (10) | Activity name | |
| GUI_DESCRIPTION | VARCHAR2 | (240) | Description |
APPS.CST_ACTIVITY_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | VARCHAR2 | (0) | Unused | |
| OPERATION_SEQUENCE_ID | VARCHAR2 | (0) | Unused | |
| DEPARTMENT_ID | NUMBER | Department identifier | ||
| ACTIVITY_ID | NUMBER | Unused | ||
| RESOURCE_ID | VARCHAR2 | (0) | Unused | |
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | VARCHAR2 | (0) | Unused | |
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (0) | Unsed | |
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN1_VALUE_2B | VARCHAR2 | (10) | Column 1 value for the Summary template in View Item Cost Information | |
| COLUMN2_VALUE_2B | VARCHAR2 | (10) | Column 2 value for the Summary template in View Item Cost Information | |
| DESCRIPTION_COLUMN | VARCHAR2 | (240) | Column 3 value for the Summary template in View Item Cost Information | |
| GUI_COLUMN1 | VARCHAR2 | (10) | 10SC - Activity | |
| GUI_COLUMN2 | VARCHAR2 | (10) | 10SC - Department code | |
| GUI_DESCRIPTION | VARCHAR2 | (240) | 10SC - Description |
APPS.CST_ACTIVITY_DEPT_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | VARCHAR2 | (0) | Unused | |
| OPERATION_SEQUENCE_ID | VARCHAR2 | (0) | Unused | |
| DEPARTMENT_ID | VARCHAR2 | (0) | Unused | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| RESOURCE_ID | VARCHAR2 | (0) | Unused | |
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | VARCHAR2 | (0) | Unused | |
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN1_VALUE_2B | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2B | VARCHAR2 | (0) | Unused | |
| DESCRIPTION_COLUMN | VARCHAR2 | (0) | Unused | |
| GUI_COLUMN1 | VARCHAR2 | (0) | Unused | |
| GUI_COLUMN2 | VARCHAR2 | (0) | Unused | |
| GUI_DESCRIPTION | VARCHAR2 | (0) | Unused | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| VALUE_ADDED_ACTIVITY_FLAG | VARCHAR2 | (150) | Flag indicating whether the activity adds value | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
APPS.CST_ACTIVITY_FLEX_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number in a routing | ||
| OPERATION_SEQUENCE_ID | NUMBER | Operation sequence identifier | ||
| DEPARTMENT_ID | VARCHAR2 | (0) | Unused | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| RESOURCE_ID | VARCHAR2 | (0) | Unused | |
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | VARCHAR2 | (0) | Unused | |
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN1_VALUE_2B | VARCHAR2 | (10) | Activity name | |
| COLUMN2_VALUE_2B | NUMBER | Operation sequence number in a routing | ||
| DESCRIPTION_COLUMN | VARCHAR2 | (240) | Operation description | |
| GUI_COLUMN1 | VARCHAR2 | (10) | Activity name | |
| GUI_COLUMN2 | NUMBER | Operation sequence number in a routing | ||
| GUI_DESCRIPTION | VARCHAR2 | (240) | Operation description |
APPS.CST_ACTIVITY_OP_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| APPLICATION_ID | NUMBER | |||
| SET_OF_BOOKS_ID | NUMBER | (15) | ||
| INVENTORY_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| INVENTORY_ORGANIZATION_ID | NUMBER | |||
| TRX_CLASS_NAME | VARCHAR2 | (80) | ||
| TRX_CLASS | CHAR | (7) | ||
| TRX_TYPE_NAME | VARCHAR2 | (80) | ||
| TRX_TYPE_N | NUMBER | |||
| TRX_NUMBER_DISPLAYED | VARCHAR2 | (40) | ||
| TRX_NUMBER_N | NUMBER | |||
| TRX_DATE | DATE | |||
| COMMENTS | VARCHAR2 | (240) | ||
| TRX_HDR_TABLE | CHAR | (3) | ||
| TRX_HDR_ID | NUMBER | |||
| ACCT_LINE_TYPE_NAME | VARCHAR2 | (80) | ||
| ACCT_LINE_TYPE | VARCHAR2 | (40) | ||
| CODE_COMBINATION_ID | NUMBER | |||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| ENTERED_DR | NUMBER | |||
| ENTERED_CR | NUMBER | |||
| ACCOUNTED_DR | VARCHAR2 | (40) | ||
| ACCOUNTED_CR | NUMBER | |||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_USER_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| ACCOUNTING_DATE | DATE | |||
| GL_TRANSFER_STATUS_NAME | VARCHAR2 | (80) | ||
| GL_TRANSFER_STATUS | VARCHAR2 | (1) | ||
| GL_BATCH_ID | NUMBER | |||
| SOURCE_TABLE | CHAR | (3) | ||
| SOURCE_ID | NUMBER | |||
| AEL_TABLE | CHAR | (3) | ||
| AE_LINE_REFERENCE | VARCHAR2 | (136) | ||
| AE_LINE_REFERENCE_INTERNAL | VARCHAR2 | (132) | ||
| INVENTORY_ITEM_ID | NUMBER | |||
| INVENTORY_ITEM_REVISION | VARCHAR2 | (3) | ||
| TRX_UOM | VARCHAR2 | (3) | ||
| TRX_QUANTITY | NUMBER | |||
| UNIT_COST | VARCHAR2 | (40) | ||
| SUBINVENTORY | VARCHAR2 | (10) | ||
| INVENTORY_ITEM_LOCATOR_ID | NUMBER | |||
| INVENTORY_ITEM_LOCATOR_NAME | VARCHAR2 | (50) | ||
| MFG_OPERATION_SEQ_NUM | NUMBER | |||
| TRX_SOURCE_TYPE_NAME | VARCHAR2 | (30) | ||
| TRX_SOURCE_TYPE_ID | NUMBER | |||
| TRX_SOURCE_NAME | VARCHAR2 | (80) | ||
| TRX_SOURCE_ID | NUMBER | |||
| TRX_REASON_NAME | VARCHAR2 | (30) | ||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | ||
| COST_ELEMENT_ID | NUMBER | |||
| JE_HEADER_ID | NUMBER | (15) | ||
| JE_LINE_NUM | NUMBER | (15) | ||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | |||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | |||
| LAST_UPDATE_LOGIN | NUMBER | |||
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| APPLICATION_ID | NUMBER | |||
| SET_OF_BOOKS_ID | NUMBER | (15) | ||
| INVENTORY_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| INVENTORY_ORGANIZATION_ID | NUMBER | |||
| TRX_CLASS_NAME | VARCHAR2 | (80) | ||
| TRX_CLASS | CHAR | (7) | ||
| TRX_TYPE_NAME | VARCHAR2 | (80) | ||
| TRX_TYPE_N | NUMBER | |||
| TRX_NUMBER_DISPLAYED | VARCHAR2 | (40) | ||
| TRX_NUMBER_N | NUMBER | |||
| TRX_DATE | DATE | |||
| COMMENTS | VARCHAR2 | (240) | ||
| TRX_HDR_TABLE | CHAR | (2) | ||
| TRX_HDR_ID | NUMBER | |||
| ACCT_LINE_TYPE_NAME | VARCHAR2 | (80) | ||
| ACCT_LINE_TYPE | VARCHAR2 | (40) | ||
| CODE_COMBINATION_ID | NUMBER | |||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| ENTERED_DR | NUMBER | |||
| ENTERED_CR | NUMBER | |||
| ACCOUNTED_DR | NUMBER | |||
| ACCOUNTED_CR | NUMBER | |||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (10) | ||
| CURRENCY_USER_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| ACCOUNTING_DATE | DATE | |||
| GL_TRANSFER_STATUS_NAME | VARCHAR2 | (80) | ||
| GL_TRANSFER_STATUS | VARCHAR2 | (1) | ||
| GL_BATCH_ID | NUMBER | |||
| SOURCE_TABLE | CHAR | (2) | ||
| SOURCE_ID | NUMBER | |||
| AEL_TABLE | CHAR | (3) | ||
| AE_LINE_REFERENCE | VARCHAR2 | (132) | ||
| AE_LINE_REFERENCE_INTERNAL | VARCHAR2 | (132) | ||
| TRX_UOM | VARCHAR2 | (3) | ||
| TRX_QUANTITY | NUMBER | |||
| UNIT_COST | VARCHAR2 | (40) | ||
| MFG_OPERATION_SEQ_NUM | NUMBER | |||
| BOM_DEPARTMENT_CODE | VARCHAR2 | (10) | ||
| BOM_DEPARTMENT_NAME | VARCHAR2 | (240) | ||
| WIP_RESOURCE_SEQ_NUM | NUMBER | |||
| TRX_SOURCE_NAME | VARCHAR2 | (20) | ||
| WIP_JOB_ID | NUMBER | |||
| WIP_JOB_NAME | VARCHAR2 | (240) | ||
| WIP_LINE_ID | NUMBER | |||
| WIP_LINE_CODE | VARCHAR2 | (10) | ||
| WIP_ASSEMBLY | VARCHAR2 | (40) | ||
| WIP_BASIS | VARCHAR2 | (80) | ||
| WIP_RESOURCE_ID | NUMBER | |||
| WIP_RESOURCE_NAME | VARCHAR2 | (10) | ||
| WIP_FLOW_SCHEDULE_NUMBER | VARCHAR2 | (30) | ||
| TRX_REASON_NAME | VARCHAR2 | (30) | ||
| COST_ELEMENT_ID | NUMBER | |||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | ||
| JE_HEADER_ID | NUMBER | (15) | ||
| JE_LINE_NUM | NUMBER | (15) | ||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | |||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | |||
| LAST_UPDATE_LOGIN | NUMBER | |||
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| APPLICATION_ID | NUMBER | |||
| SET_OF_BOOKS_ID | NUMBER | (15) | ||
| INVENTORY_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| INVENTORY_ORGANIZATION_ID | NUMBER | |||
| TRX_CLASS_NAME | VARCHAR2 | (80) | ||
| TRX_CLASS | CHAR | (7) | ||
| TRX_TYPE_NAME | VARCHAR2 | (80) | ||
| TRX_TYPE_N | NUMBER | |||
| TRX_NUMBER_DISPLAYED | VARCHAR2 | (40) | ||
| TRX_NUMBER_N | NUMBER | |||
| TRX_DATE | DATE | |||
| COMMENTS | VARCHAR2 | (240) | ||
| TRX_HDR_TABLE | CHAR | (3) | ||
| TRX_HDR_ID | NUMBER | |||
| ACCT_LINE_TYPE_NAME | VARCHAR2 | (80) | ||
| ACCT_LINE_TYPE | VARCHAR2 | (40) | ||
| CODE_COMBINATION_ID | NUMBER | |||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| ENTERED_DR | NUMBER | |||
| ENTERED_CR | NUMBER | |||
| ACCOUNTED_DR | VARCHAR2 | (40) | ||
| ACCOUNTED_CR | NUMBER | |||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_USER_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| ACCOUNTING_DATE | DATE | |||
| GL_TRANSFER_STATUS_NAME | VARCHAR2 | (80) | ||
| GL_TRANSFER_STATUS | VARCHAR2 | (1) | ||
| GL_BATCH_ID | NUMBER | |||
| SOURCE_TABLE | CHAR | (3) | ||
| SOURCE_ID | NUMBER | |||
| AEL_TABLE | CHAR | (3) | ||
| AE_LINE_REFERENCE | VARCHAR2 | (132) | ||
| AE_LINE_REFERENCE_INTERNAL | VARCHAR2 | (132) | ||
| INVENTORY_ITEM_ID | NUMBER | |||
| INVENTORY_ITEM_REVISION | VARCHAR2 | (3) | ||
| TRX_UOM | VARCHAR2 | (3) | ||
| TRX_QUANTITY | NUMBER | |||
| UNIT_COST | VARCHAR2 | (40) | ||
| SUBINVENTORY | VARCHAR2 | (10) | ||
| INVENTORY_ITEM_LOCATOR_ID | NUMBER | |||
| INVENTORY_ITEM_LOCATOR_NAME | VARCHAR2 | (50) | ||
| MFG_OPERATION_SEQ_NUM | NUMBER | |||
| TRX_SOURCE_TYPE_NAME | VARCHAR2 | (30) | ||
| TRX_SOURCE_TYPE_ID | NUMBER | |||
| TRX_SOURCE_NAME | VARCHAR2 | (80) | ||
| TRX_SOURCE_ID | NUMBER | |||
| TRX_REASON_NAME | VARCHAR2 | (30) | ||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | ||
| COST_ELEMENT_ID | NUMBER | |||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | |||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | |||
| LAST_UPDATE_LOGIN | NUMBER | |||
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| APPLICATION_ID | NUMBER | |||
| SET_OF_BOOKS_ID | NUMBER | (15) | Y | |
| INVENTORY_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| INVENTORY_ORGANIZATION_ID | NUMBER | Y | ||
| TRX_CLASS_NAME | VARCHAR2 | (80) | Y | |
| TRX_CLASS | CHAR | (7) | ||
| TRX_TYPE_NAME | VARCHAR2 | (80) | ||
| TRX_TYPE_N | NUMBER | Y | ||
| TRX_NUMBER_DISPLAYED | VARCHAR2 | (40) | ||
| TRX_NUMBER_N | NUMBER | Y | ||
| TRX_DATE | DATE | |||
| COMMENTS | VARCHAR2 | (240) | ||
| TRX_HDR_TABLE | CHAR | (2) | ||
| TRX_HDR_ID | NUMBER | Y | ||
| ACCT_LINE_TYPE_NAME | VARCHAR2 | (80) | Y | |
| ACCT_LINE_TYPE | VARCHAR2 | (40) | ||
| CODE_COMBINATION_ID | NUMBER | Y | ||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| ENTERED_DR | NUMBER | |||
| ENTERED_CR | NUMBER | |||
| ACCOUNTED_DR | NUMBER | |||
| ACCOUNTED_CR | NUMBER | |||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (10) | ||
| CURRENCY_USER_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| ACCOUNTING_DATE | DATE | |||
| GL_TRANSFER_STATUS_NAME | VARCHAR2 | (80) | Y | |
| GL_TRANSFER_STATUS | VARCHAR2 | (1) | ||
| GL_BATCH_ID | NUMBER | |||
| SOURCE_TABLE | CHAR | (2) | ||
| SOURCE_ID | NUMBER | Y | ||
| AEL_TABLE | CHAR | (3) | ||
| AE_LINE_REFERENCE | VARCHAR2 | (132) | ||
| AE_LINE_REFERENCE_INTERNAL | VARCHAR2 | (132) | ||
| TRX_UOM | VARCHAR2 | (3) | ||
| TRX_QUANTITY | NUMBER | |||
| UNIT_COST | VARCHAR2 | (40) | ||
| MFG_OPERATION_SEQ_NUM | NUMBER | |||
| BOM_DEPARTMENT_CODE | VARCHAR2 | (10) | ||
| BOM_DEPARTMENT_NAME | VARCHAR2 | (240) | ||
| WIP_RESOURCE_SEQ_NUM | NUMBER | |||
| TRX_SOURCE_NAME | VARCHAR2 | (20) | ||
| WIP_JOB_ID | NUMBER | Y | ||
| WIP_JOB_NAME | VARCHAR2 | (240) | ||
| WIP_LINE_ID | NUMBER | |||
| WIP_LINE_CODE | VARCHAR2 | (10) | ||
| WIP_ASSEMBLY | VARCHAR2 | (40) | ||
| WIP_BASIS | VARCHAR2 | (80) | ||
| WIP_RESOURCE_ID | NUMBER | |||
| WIP_RESOURCE_NAME | VARCHAR2 | (10) | ||
| WIP_FLOW_SCHEDULE_NUMBER | VARCHAR2 | (30) | ||
| TRX_REASON_NAME | VARCHAR2 | (30) | ||
| COST_ELEMENT_ID | NUMBER | |||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_LOGIN | NUMBER | |||
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| BATCH_ID | NUMBER | Y | ||
| BATCH_DESCRIPTION | VARCHAR2 | (240) | ||
| ADJUSTMENT_ACCOUNT | NUMBER | |||
| PROJECT_ID | NUMBER | |||
| PROJECT_NUMBER | VARCHAR2 | (25) | Project Number | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (3) | ||
| COST_GROUP | VARCHAR2 | (10) | Y | |
| VARIANCE_HEADER_ID | NUMBER | Y | ||
| VARIANCE_LINE_ID | NUMBER | Y | ||
| ORIG_TRANSACTION_DATE | DATE | |||
| TRANSACTION_DATE | DATE | Y | ||
| CURRENT_QUANTITY | NUMBER | Y | ||
| CURRENT_ITEM_COST | NUMBER | Y | ||
| VALUE_CHANGE | NUMBER | |||
| PCNT_VALUE_CHANGE | NUMBER | |||
| PO_NUMBER | VARCHAR2 | (20) | Y | |
| PO_LINE_NUM | NUMBER | Y | ||
| INVOICE_NUM | VARCHAR2 | (50) | Y | |
| INVOICE_DIST_LINE_NUM | NUMBER | |||
| PO_DISTRIBUTION_NUM | NUMBER | Y | PO Distribution Line Number | |
| HEADER_VAR_AMOUNT | NUMBER | |||
| LINE_VAR_AMOUNT | NUMBER | |||
| ORGANIZATION_ID | NUMBER | |||
| INVENTORY_ITEM_ID | NUMBER | |||
| PO_DISTRIBUTION_ID | NUMBER | |||
| PO_DIST_ACCOUNT | NUMBER | PO Distribution Accrual Account |
APPS.CST_AP_VARIANCE_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| COST_GROUP_ID | NUMBER | Cost Group Identifier | ||
| MATERIAL_ACCOUNT | NUMBER | Inventory material account | ||
| MATERIAL_OVERHEAD_ACCOUNT | NUMBER | Inventory material overhead account | ||
| RESOURCE_ACCOUNT | NUMBER | Resource labor account | ||
| OVERHEAD_ACCOUNT | NUMBER | Overhead account | ||
| OUTSIDE_PROCESSING_ACCOUNT | NUMBER | Outside processing account | ||
| AVERAGE_COST_VAR_ACCOUNT | NUMBER | Average cost variance account | ||
| ENCUMBRANCE_ACCOUNT | NUMBER | Encumbrance account | ||
| PAYBACK_MAT_VAR_ACCOUNT | NUMBER | borrow payback material variance account | ||
| PAYBACK_RES_VAR_ACCOUNT | NUMBER | borrow payback resource account | ||
| PAYBACK_OSP_VAR_ACCOUNT | NUMBER | borrow payback outside processing variance account | ||
| PAYBACK_MOH_VAR_ACCOUNT | NUMBER | borrow payback material overhead variance account | ||
| PAYBACK_OVH_VAR_ACCOUNT | NUMBER | borrow payback overhead variance account |
APPS.CST_AVG_DIST_ACCTS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LAYER_ID | NUMBER | Y | Unique layer identifier generated by the sequence CST_QUANTITY_LAYERS_S. | |
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| COST_ELEMENT_DSP | VARCHAR2 | (50) | Y | Cost element name |
| TL_COST | NUMBER | This level cost. | ||
| PL_COST | NUMBER | Previous level cost | ||
| ITEM_COST | NUMBER | Item cost |
APPS.CST_AVG_ELEM_COSTS_V is not referenced by any database object
A Business Intelligence System view
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PRODUCT_CATEGORY | VARCHAR2 | (163) | ||
| ITEM_NUMBER | VARCHAR2 | (40) | ||
| ITEM_PRIMARY_UOM | VARCHAR2 | (3) | ||
| LEGAL_ENTITY_NAME | VARCHAR2 | (240) | ||
| OPERATING_UNIT_NAME | VARCHAR2 | (240) | ||
| SALES_ORDER_NUMBER | NUMBER | |||
| SALES_ORDER_LINE_NUMBER | NUMBER | |||
| TRANSACTION_DATE | DATE | |||
| SALES_CHANNEL_NAME | VARCHAR2 | (80) | ||
| CUSTOMER_NAME | VARCHAR2 | (360) | ||
| SALES_REP_NAME | VARCHAR2 | (240) | ||
| CUSTOMER_CLASS_NAME | VARCHAR2 | (80) | ||
| TERRITORY_NAME | VARCHAR2 | (40) | ||
| AREA_NAME | VARCHAR2 | (80) | ||
| COUNTRY_NAME | VARCHAR2 | (80) | ||
| REGION_NAME | VARCHAR2 | (80) | ||
| YEAR | VARCHAR2 | (15) | ||
| QUARTER | VARCHAR2 | (15) | ||
| MONTH | VARCHAR2 | (15) | ||
| YEAR_PERIOD_NUM | NUMBER | |||
| QTR_PERIOD_NUM | NUMBER | |||
| MONTH_PERIOD_NUM | NUMBER | |||
| QTR_PERIOD_LABEL | VARCHAR2 | (48) | ||
| MONTH_PERIOD_LABEL | VARCHAR2 | (46) | ||
| QTR_PERIOD_SEQ | NUMBER | |||
| MONTH_PERIOD_SEQ | NUMBER | |||
| QUANTITY_INVOICED | NUMBER | |||
| QUANTITY_SHIPPED | NUMBER | |||
| SALES_REVENUE_VALUE | NUMBER | |||
| COST_OF_GOODS_SOLD_VALUE | NUMBER |
APPS.CST_BIS_MARGIN_ANALYSIS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CATEGORY_ID | NUMBER | Y | Category ID | |
| CATEGORY_CONCAT_SEGMENTS | VARCHAR2 | (163) | Category Concatenated Segments | |
| MNT_COST_ELEMENT_ID | NUMBER | Y | Maintenace Cost Element ID | |
| MNT_COST_ELEMENT | VARCHAR2 | (50) | Y | Maintenace Cost Element |
| MFG_COST_ELEMENT_ID | NUMBER | Y | Manufacturing Cost Element ID | |
| MFG_COST_ELEMENT | VARCHAR2 | (50) | Y | Manufacturing Cost Element |
| START_DATE | DATE | Y | Start Enable Date | |
| END_DATE | DATE | End Enable Date | ||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | Direct Item Expenditure Type | |
| EXPENDITURE_TYPE_ID | NUMBER | Direct Item Expenditure Type ID |
APPS.CST_CAT_ELE_EXP_ASSOCS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Inventory Item Identifier | ||
| TRANSACTION_ID | NUMBER | Transaction ID | ||
| ORGANIZATION_ID | NUMBER | Organization Identifier | ||
| LAYER_ID | NUMBER | Layer ID | ||
| TRANSACTION_COSTED_DATE | DATE | Transaction costed date | ||
| TRANSACTION_DATE | DATE | Transaction date | ||
| PRIOR_COSTED_QUANTITY | NUMBER | Prior Costed Quantity | ||
| PRIMARY_QUANTITY | NUMBER | Primary Quantity | ||
| NEW_QUANTITY | NUMBER | New quantity | ||
| COST_GROUP_ID | NUMBER | Cost group id | ||
| TRANSACTION_TYPE | VARCHAR2 | (80) | Transaction type | |
| ACTUAL_COST | NUMBER | Actual Cost | ||
| ACTUAL_MATERIAL | NUMBER | Material Element Cost | ||
| ACTUAL_MATERIAL_OVERHEAD | NUMBER | Material Overhead Element Cost | ||
| ACTUAL_RESOURCE | NUMBER | Resource Element Cost | ||
| ACTUAL_OUTSIDE_PROCESSING | NUMBER | Outside Processing Element Cost | ||
| ACTUAL_OVERHEAD | NUMBER | Overhead Cost | ||
| PRIOR_COST | NUMBER | Prior Cost | ||
| PRIOR_MATERIAL | NUMBER | Prior material element cost | ||
| PRIOR_MATERIAL_OVERHEAD | NUMBER | Prior material overhead cost | ||
| PRIOR_RESOURCE | NUMBER | Prior resource element cost | ||
| PRIOR_OUTSIDE_PROCESSING | NUMBER | Prior outside processing element cost | ||
| PRIOR_OVERHEAD | NUMBER | Prior overhead cost | ||
| NEW_COST | NUMBER | New cost | ||
| NEW_MATERIAL | NUMBER | New material element cost | ||
| NEW_MATERIAL_OVERHEAD | NUMBER | New material overhead element cost | ||
| NEW_RESOURCE | NUMBER | New resource element cost | ||
| NEW_OUTSIDE_PROCESSING | NUMBER | New outside processing element cost | ||
| NEW_OVERHEAD | NUMBER | New overhead cost | ||
| CHANGE | VARCHAR2 | (1) | Cost element change flag |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LAYER_ID | NUMBER | Unique layer identifier generated from the sequence CST_QUANTITY_LAYERS_s | ||
| COST_GROUP_ID | NUMBER | Cost group identifier | ||
| LAYER_QUANTITY | NUMBER | Costed quantity for this particular layer | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| INVENTORY_ASSET_FLAG | NUMBER | Y | Flag indicating whether the item is asset or expense | |
| LOT_SIZE | NUMBER | Lot Size | ||
| BASED_ON_ROLLUP_FLAG | NUMBER | Flag indicating whether cost will be rolled up | ||
| SHRINKAGE_RATE | NUMBER | Manufacturing shrinkage rate (for make item only) | ||
| DEFAULTED_FLAG | NUMBER | Y | Flag indicating whether the cost of the item is defaulted from the default cost type during cost roll up | |
| COST_UPDATE_ID | NUMBER | Cost update session identifier | ||
| PL_MATERIAL | NUMBER | Previous level material cost | ||
| PL_MATERIAL_OVERHEAD | NUMBER | Previous level material overhead cost | ||
| PL_RESOURCE | NUMBER | Previous level resourcecost | ||
| PL_OUTSIDE_PROCESSING | NUMBER | Previous level outside processing cost | ||
| PL_OVERHEAD | NUMBER | Previous level overhead cost | ||
| TL_MATERIAL | NUMBER | This level material cost. | ||
| TL_MATERIAL_OVERHEAD | NUMBER | This level material overhead cost. | ||
| TL_RESOURCE | NUMBER | This level resource cost. | ||
| TL_OUTSIDE_PROCESSING | NUMBER | This level outside processing cost. | ||
| TL_OVERHEAD | NUMBER | This level overhead cost. | ||
| MATERIAL_COST | NUMBER | Material cost. | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material overhead cost | ||
| RESOURCE_COST | NUMBER | Resource cost | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside processing cost. | ||
| OVERHEAD_COST | NUMBER | Overhead cost. | ||
| PL_ITEM_COST | NUMBER | Previous level item cost. | ||
| TL_ITEM_COST | NUMBER | This level item cost. | ||
| ITEM_COST | NUMBER | Layer item cost. | ||
| UNBURDENED_COST | NUMBER | Item unit cost minus this level material overhead | ||
| BURDEN_COST | NUMBER | This level material overhead. | ||
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | Organization Id | |
| CLASS_CODE | VARCHAR2 | (10) | Y | Class Code |
| CLASS_TYPE | NUMBER | Y | Class Type | |
| COST_GROUP_ID | NUMBER | Cost Group Id | ||
| DISABLE_DATE | DATE | Disable Date |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| GROUP_ID | VARCHAR2 | (40) | ||
| DESCRIPTION | VARCHAR2 | (80) | ||
| SRC_TABLE | NUMBER |
APPS.CST_CIMP_GROUP_ID is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORALCE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | VARCHAR2 | (0) | Unused | |
| OPERATION_SEQUENCE_ID | VARCHAR2 | (0) | Unused | |
| DEPARTMENT_ID | VARCHAR2 | (0) | Unused | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| RESOURCE_ID | NUMBER | Resource identifier(sub-element) | ||
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | VARCHAR2 | (0) | Unused | |
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN1_VALUE_2B | VARCHAR2 | (10) | Resource code | |
| COLUMN2_VALUE_2B | VARCHAR2 | (10) | Activity name | |
| DESCRIPTION_COLUMN | VARCHAR2 | (240) | Description | |
| GUI_COLUMN1 | VARCHAR2 | (10) | Resource code | |
| GUI_COLUMN2 | VARCHAR2 | (10) | Activity name | |
| GUI_DESCRIPTION | VARCHAR2 | (240) | Description |
APPS.CST_CODE_ACTIVITY_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | VARCHAR2 | (0) | Unused | |
| OPERATION_SEQUENCE_ID | VARCHAR2 | (0) | Unused | |
| DEPARTMENT_ID | VARCHAR2 | (0) | Unused | |
| ACTIVITY_ID | VARCHAR2 | (0) | Unused | |
| RESOURCE_ID | NUMBER | Resource identifier (sub-element) | ||
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | VARCHAR2 | (0) | Unused | |
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (10) | Resource code | |
| COLUMN2_VALUE_2A | VARCHAR2 | (3) | Unit of measure | |
| COLUMN1_VALUE_2B | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2B | VARCHAR2 | (10) | Resource code | |
| DESCRIPTION_COLUMN | VARCHAR2 | (240) | Description | |
| GUI_COLUMN1 | VARCHAR2 | (0) | Unused | |
| GUI_COLUMN2 | VARCHAR2 | (10) | Resource code | |
| GUI_DESCRIPTION | VARCHAR2 | (240) | Description |
APPS.CST_CODE_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | VARCHAR2 | (0) | Unused | |
| OPERATION_SEQUENCE_ID | VARCHAR2 | (0) | Unused | |
| DEPARTMENT_ID | NUMBER | Department identifier | ||
| ACTIVITY_ID | VARCHAR2 | (0) | Unused | |
| RESOURCE_ID | NUMBER | Resource identifier (sub-element) | ||
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | VARCHAR2 | (0) | Unused | |
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN1_VALUE_2B | VARCHAR2 | (10) | Resource code | |
| COLUMN2_VALUE_2B | VARCHAR2 | (10) | Department code | |
| DESCRIPTION_COLUMN | VARCHAR2 | (240) | Description | |
| GUI_COLUMN1 | VARCHAR2 | (10) | Resource code | |
| GUI_COLUMN2 | VARCHAR2 | (10) | Department code | |
| GUI_DESCRIPTION | VARCHAR2 | (240) | Description |
APPS.CST_CODE_DEPARTMENT_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | VARCHAR2 | (0) | Unused | |
| OPERATION_SEQUENCE_ID | VARCHAR2 | (0) | Unused | |
| DEPARTMENT_ID | VARCHAR2 | (0) | Unused | |
| ACTIVITY_ID | VARCHAR2 | (0) | Unused | |
| RESOURCE_ID | NUMBER | Resource identifier (sub-element) | ||
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | VARCHAR2 | (0) | Unused | |
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN1_VALUE_2B | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2B | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| DESCRIPTION_COLUMN | VARCHAR2 | (0) | Description | |
| GUI_COLUMN1 | VARCHAR2 | (0) | Unused | |
| GUI_COLUMN2 | VARCHAR2 | (0) | Unused | |
| GUI_DESCRIPTION | VARCHAR2 | (0) | Unused | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
APPS.CST_CODE_FLEX_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number in a routing | ||
| OPERATION_SEQUENCE_ID | NUMBER | Operation sequence identifier | ||
| DEPARTMENT_ID | VARCHAR2 | (0) | Unused | |
| ACTIVITY_ID | VARCHAR2 | (0) | Unused | |
| RESOURCE_ID | NUMBER | Resource identifier (sub-element) | ||
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | VARCHAR2 | (0) | Unused | |
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN1_VALUE_2B | VARCHAR2 | (10) | Resource code | |
| COLUMN2_VALUE_2B | NUMBER | Operation sequence number in a routing | ||
| DESCRIPTION_COLUMN | VARCHAR2 | (240) | Description | |
| GUI_COLUMN1 | VARCHAR2 | (10) | Resource code | |
| GUI_COLUMN2 | NUMBER | Operation sequence number in a routing | ||
| GUI_DESCRIPTION | VARCHAR2 | (240) | Description |
APPS.CST_CODE_OPERATION_COST_VIEW is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row Identifier | |
| COST_GROUP_ID | NUMBER | Y | Cost group identifier | |
| COST_GROUP | VARCHAR2 | (10) | Y | Cost group name |
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| MULTI_ORG_FLAG | NUMBER | Flag indicating if the cost group is available in multiple organizations | ||
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| DISABLE_DATE | DATE | Disable date | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who column | ||
| PROGRAM_ID | NUMBER | Concurrent who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent who column | ||
| LEGAL_ENTITY | NUMBER | |||
| COST_GROUP_TYPE | NUMBER | |||
| LEGAL_ENTITY_NAME | VARCHAR2 | (240) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | ||
| COST_UPDATE_ID | NUMBER | Y | Cost update session identifier | |
| COST_UPDATE_ID_JOIN | NUMBER | Y | Cost update session identifier | |
| COUNT | NUMBER | |||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ITEM_DESCRIPTION | VARCHAR2 | (240) | ||
| PADDED_ITEM_NUMBER | VARCHAR2 | (40) | ||
| UOM | VARCHAR2 | (3) | ||
| UPDATE_DESCRIPTION | VARCHAR2 | (240) | Description | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| UPDATE_DATE | DATE | The date and time that cost update is run | ||
| STANDARD_COST | NUMBER | Standard cost for the item after cost update | ||
| INV_ADJ_VAL_C | NUMBER | Total adjustment value for the item | ||
| INTRANSIT_ADJ_VAL_C | NUMBER | Total intransit adjustment value for the item | ||
| WIP_ADJ_VAL_C | NUMBER | Total adjustment value for the item in WIP | ||
| INV_ADJ_QTY_C | NUMBER | Total adjustment quantity for the item | ||
| INTRANSIT_ADJ_QTY_C | NUMBER | Total intransit adjustment quantity for the item | ||
| WIP_ADJ_QTY_C | NUMBER | Total adjustment quantity for the item in WIP | ||
| MATERIAL | NUMBER | |||
| MATERIAL_OVERHEAD | NUMBER | |||
| RESOURCE_COST | NUMBER | |||
| OUTSIDE_PROCESSING | NUMBER | |||
| OVERHEAD | NUMBER | |||
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who column | ||
| PROGRAM_ID | NUMBER | Concurrent who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent who column |
APPS.CST_COST_HISTORY_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| COST_TYPE | VARCHAR2 | (10) | Y | Cost type name |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| COSTING_METHOD_TYPE | NUMBER | Y | Costing method used, standard or average | |
| FROZEN_STANDARD_FLAG | NUMBER | Whether it is frozen standard cost type or not | ||
| DEFAULT_COST_TYPE_ID | NUMBER | Y | Cost type identifier whose set of costs will be used as the default cost type during the cost roll up | |
| BOM_SNAPSHOT_FLAG | NUMBER | Y | Whether to save the bill structure when rolling up costs | |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator | |
| ALLOW_UPDATES_FLAG | NUMBER | Whether the costs defined for this cost type can be changed | ||
| ALLOW_UPDATES_FLAG_DSP | VARCHAR2 | (80) | Y | |
| PL_ELEMENT_FLAG | NUMBER | Y | Whether to group previous level cost by cost element | |
| PL_RESOURCE_FLAG | NUMBER | Y | Whether to group previous level cost by sub-element | |
| PL_OPERATION_FLAG | NUMBER | Y | Whether to group previous level cost by operation sequence number | |
| PL_ACTIVITY_FLAG | NUMBER | Y | Whether to group previous level cost by activity | |
| DISABLE_DATE | DATE | Disable date | ||
| AVAILABLE_TO_ENG_FLAG | NUMBER | Whether the set of cost for this cost type is available for ENG | ||
| COMPONENT_YIELD_FLAG | NUMBER | Y | Whether to consider component yield factor when rolling up costs | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who column | ||
| PROGRAM_ID | NUMBER | Concurrent who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent who column |
APPS.CST_COST_TYPES_ALL_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | ||
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| COST_TYPE | VARCHAR2 | (10) | Y | Cost type name |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| COSTING_METHOD_TYPE | NUMBER | Y | Costing method used, standard or average | |
| FROZEN_STANDARD_FLAG | NUMBER | Whether it is frozen standard cost type or not | ||
| DEFAULT_COST_TYPE_ID | NUMBER | Y | Cost type identifier whose set of costs will be used as the default cost type during the cost roll up | |
| DEFAULT_COST_TYPE | VARCHAR2 | (10) | Y | Cost type name |
| BOM_SNAPSHOT_FLAG | NUMBER | Y | Whether to save the bill structure when rolling up costs | |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator | |
| ALLOW_UPDATES_FLAG | NUMBER | Whether the costs defined for this cost type can be changed | ||
| MULTI_ORG_FLAG | NUMBER | Flag indicating if the cost group is available in multiple organizations | ||
| PL_ELEMENT_FLAG | NUMBER | Y | Whether to group previous level cost by cost element | |
| PL_RESOURCE_FLAG | NUMBER | Y | Whether to group previous level cost by sub-element | |
| PL_OPERATION_FLAG | NUMBER | Y | Whether to group previous level cost by operation sequence number | |
| PL_ACTIVITY_FLAG | NUMBER | Y | Whether to group previous level cost by activity | |
| DISABLE_DATE | DATE | Disable date | ||
| AVAILABLE_TO_ENG_FLAG | NUMBER | Whether the set of cost for this cost type is available for ENG | ||
| COMPONENT_YIELD_FLAG | NUMBER | Y | Whether to consider component yield factor when rolling up costs | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who column | ||
| PROGRAM_ID | NUMBER | Concurrent who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent who column |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| COST_TYPE | VARCHAR2 | (10) | Y | Cost type name |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| COSTING_METHOD_TYPE | NUMBER | Y | Costing method used, standard or average | |
| FROZEN_STANDARD_FLAG | NUMBER | Whether it is frozen standard cost type or not | ||
| DEFAULT_COST_TYPE_ID | NUMBER | Y | Cost type identifier whose set of costs will be used as the default cost type during the cost roll up | |
| BOM_SNAPSHOT_FLAG | NUMBER | Y | Whether to save the bill structure when rolling up costs | |
| ALTERNATE_BOM_DESIGNATOR | VARCHAR2 | (10) | Alternate designator | |
| ALLOW_UPDATES_FLAG | NUMBER | Whether the costs defined for this cost type can be changed | ||
| ALLOW_UPDATES_FLAG_DSP | VARCHAR2 | (80) | Y | |
| PL_ELEMENT_FLAG | NUMBER | Y | Whether to group previous level cost by cost element | |
| PL_RESOURCE_FLAG | NUMBER | Y | Whether to group previous level cost by sub-element | |
| PL_OPERATION_FLAG | NUMBER | Y | Whether to group previous level cost by operation sequence number | |
| PL_ACTIVITY_FLAG | NUMBER | Y | Whether to group previous level cost by activity | |
| DISABLE_DATE | DATE | Disable date | ||
| AVAILABLE_TO_ENG_FLAG | NUMBER | Whether the set of cost for this cost type is available for ENG | ||
| COMPONENT_YIELD_FLAG | NUMBER | Y | Whether to consider component yield factor when rolling up costs | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who column | ||
| PROGRAM_ID | NUMBER | Concurrent who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent who column |
APPS.CST_COST_TYPES_VAL_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | Cost update session identifier | |
| UPDATE_DATE | DATE | Cost update session start time | ||
| STATUS | NUMBER | Y | The status of the cost update program | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| COST_TYPE | VARCHAR2 | (10) | Y | Cost type name |
| SNAPSHOT_SAVED_FLAG | NUMBER | Flag indicating whether adjustment details are saved | ||
| UPDATE_OPTION_DSP | VARCHAR2 | (80) | ||
| DESCRIPTION | VARCHAR2 | (240) | Y | Description |
| INV_ADJUSTMENT_ACCOUNT | NUMBER | Code combination identifier for the inventory adjustment account | ||
| CODE_COMBINATION_ID | NUMBER | (15) | Key flexfield combination defining column | |
| UPDATE_RESOURCE_OVHD_FLAG | NUMBER | Y | Flag indicating whether resource and overhead costs should be updated | |
| UPDATE_ACTIVITY_FLAG | NUMBER | Flag indicating whether activity cost should be updated | ||
| RANGE_OPTION_DSP | VARCHAR2 | (80) | ||
| SINGLE_ITEM | NUMBER | Inventory item identifier | ||
| INV_ITEM_ID | NUMBER | |||
| ITEM_RANGE_LOW | VARCHAR2 | (240) | Inventory item range from | |
| ITEM_RANGE_HIGH | VARCHAR2 | (240) | Inventory item range to | |
| CATEGORY_ID | NUMBER | Category identifier | ||
| CATEGORY_NAME | VARCHAR2 | (163) | ||
| CATEGORY_SET_ID | NUMBER | Category set identifier | ||
| CATEGORY_SET_NAME | VARCHAR2 | (30) | Category set name | |
| REQUEST_ID | NUMBER | Concurrent who column | ||
| CONC_PHASE_DSP | VARCHAR2 | (80) | ||
| CONC_STATUS_DSP | VARCHAR2 | (80) | ||
| CONC_MESSAGE | VARCHAR2 | (240) | The text message about how the request completed | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who column | ||
| PROGRAM_ID | NUMBER | Concurrent who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent who column | ||
| ROW_ID | ROWID | (10) |
APPS.CST_COST_UPDATES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier | ||
| COST_GROUP_ID | NUMBER | Cost group identifier | ||
| COST_TYPE_ID | NUMBER | Cost type identifier | ||
| ITEM_COST | NUMBER | Item unit cost | ||
| PL_MATERIAL | NUMBER | Previous level material cost | ||
| PL_MATERIAL_OVERHEAD | NUMBER | Previous level material overhead cost | ||
| PL_RESOURCE | NUMBER | Previous level resource cost | ||
| PL_OUTSIDE_PROCESSING | NUMBER | Previous level outside processing cost | ||
| PL_OVERHEAD | NUMBER | Previous level overhead cost | ||
| TL_MATERIAL | NUMBER | This level material cost | ||
| TL_MATERIAL_OVERHEAD | NUMBER | This level material overhead cost | ||
| TL_RESOURCE | NUMBER | This level resource cost | ||
| TL_OUTSIDE_PROCESSING | NUMBER | This level outside processing cost | ||
| TL_OVERHEAD | NUMBER | This level overhead cost | ||
| MATERIAL_COST | NUMBER | Material cost | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material overhead cost | ||
| RESOURCE_COST | NUMBER | Resource cost | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside processing cost | ||
| OVERHEAD_COST | NUMBER | Overhead cost | ||
| PL_ITEM_COST | NUMBER | Previous level item cost | ||
| TL_ITEM_COST | NUMBER | This level item cost | ||
| UNBURDENED_COST | NUMBER | Item unit cost minus this level material overhead | ||
| BURDEN_COST | NUMBER | This level material overhead | ||
| INVENTORY_ASSET_FLAG | NUMBER | Flag indicating whether item is asset or expense |
APPS.CST_CQL_CIC_ITEM_COSTS_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| ACTUAL_COST_TYPE_ID | NUMBER | Y | Cost type identifier or the default cost type identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| INVENTORY_ASSET_FLAG | NUMBER | Y | Flag indicating whether the item is asset or expense | |
| LOT_SIZE | NUMBER | Lot Size | ||
| BASED_ON_ROLLUP_FLAG | NUMBER | Flag indicating whether cost will be rolled up | ||
| SHRINKAGE_RATE | NUMBER | Manufacturing shrinkage rate (for make item only) | ||
| DEFAULTED_FLAG | NUMBER | Y | Flag indicating whether the cost of the item is defaulted from the default cost type during cost roll up | |
| COST_UPDATE_ID | NUMBER | Cost update session identifier | ||
| PL_MATERIAL | NUMBER | Previous level material cost | ||
| PL_MATERIAL_OVERHEAD | NUMBER | Previous level material overhead cost | ||
| PL_RESOURCE | NUMBER | Previous level resource cost | ||
| PL_OUTSIDE_PROCESSING | NUMBER | Previous level outside processing cost | ||
| PL_OVERHEAD | NUMBER | Previous level overhead cost | ||
| TL_MATERIAL | NUMBER | This level material cost | ||
| TL_MATERIAL_OVERHEAD | NUMBER | This level material overhead cost | ||
| TL_OUTSIDE_PROCESSING | NUMBER | This level outside processing cost | ||
| TL_OVERHEAD | NUMBER | This level overhead cost | ||
| MATERIAL_COST | NUMBER | Material cost | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material overhead cost | ||
| RESOURCE_COST | NUMBER | Resource cost | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside Processing cost | ||
| OVERHEAD_COST | NUMBER | Overhead cost | ||
| PL_ITEM_COST | NUMBER | Total previous level cost | ||
| TL_ITEM_COST | NUMBER | Total this level cost | ||
| ITEM_COST | NUMBER | Total item unit cost | ||
| UNBURDENED_COST | NUMBER | Item unit cost minus this level material overhead | ||
| BURDEN_COST | NUMBER | This level material overhead |
APPS.CST_DEFAULT_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| ITEM_COST_TYPE_ID | NUMBER | Y | Cost type identifier or the default cost tpe identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| INVENTORY_ASSSET_FLAG | NUMBER | Y | Flag indicating item is an inventory asset | |
| LOT_SIZE | NUMBER | Lot Size | ||
| BASED_ON_ROLLUP_FLAG | NUMBER | Flag indicating whether cost will be rolled up | ||
| SHRINKAGE_RATE | NUMBER | Manufacturing shrinkage rate (for make item only) | ||
| DEFAULTED_FLAG | NUMBER | Y | Flag indicating whether the cost of the item is defaulted from the default cost type during cost roll up | |
| COST_UPDATE_ID | NUMBER | Cost update session identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number in a routing | ||
| DEPARTMENT_ID | NUMBER | Department identifier | ||
| LEVEL_TYPE | NUMBER | Level at which cost is incurred | ||
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| RESOURCE_SEQ_NUM | NUMBER | Resource sequence number in an operation | ||
| RESOURCE_ID | NUMBER | Resource identifier (sub-element) | ||
| RESOURCE_RATE | NUMBER | Resource unit cost (resource sub-element only) | ||
| ITEM_UNITS | NUMBER | Number of item units the activity cost is applied to(the number of items for each activity occurrence) | ||
| ACTIVITY_UNITS | NUMBER | Number of activity units applied to the item cost(the number of times the activity occurs for the item) | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Number of resource units, overhead rate, or activity unit cost per basis | ||
| BASIS_TYPE | NUMBER | Basis or allocation method for the cost | ||
| BASIS_RESOURCE_ID | NUMBER | Resource identifier for the resource overhead is based on | ||
| BASIS_FACTOR | NUMBER | Basis factor | ||
| NET_YIELD_OR_SHRINKAGE_FACTOR | NUMBER | Item shrinkage factor computed from the item shrinkage | ||
| ITEM_COST | NUMBER | Total item cost for this row | ||
| COST_ELEMENT_ID | NUMBER | Cost element identifier | ||
| ROLLUP_SOURCE_TYPE | NUMBER | Cost source | ||
| OPERATION_SEQUENCE_ID | NUMBER | Operation sequence identifier |
APPS.CST_DEFAULT_DETAIL_COST_VIEW is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | ||
| DEPARTMENT_ID | NUMBER | Y | Department identifier | |
| DEPARTMENT_CODE | VARCHAR2 | (10) | Y | Department code |
| DEPARTMENT_DESC | VARCHAR2 | (240) | Description | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| COST_TYPE | VARCHAR2 | (10) | Y | Cost type name |
| COST_TYPE_DESC | VARCHAR2 | (240) | Description | |
| OVERHEAD_ID | NUMBER | Y | Overhead sub-element identifier | |
| OVERHEAD_CODE | VARCHAR2 | (10) | Y | Resource code |
| OVERHEAD_DESC | VARCHAR2 | (240) | Description | |
| COST_CODE_TYPE | NUMBER | Y | Cost code type | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| BASIS_TYPE | NUMBER | Y | Basis | |
| RATE_OR_AMOUNT | NUMBER | Y | Rate or amount for the overhead sub-element | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| ACTIVITY | VARCHAR2 | (10) | Activity name | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who column | ||
| PROGRAM_ID | NUMBER | Concurrent who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent who column |
APPS.CST_DEPARTMENT_OVERHEADS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OVERHEAD_ID | NUMBER | Overhead sub-element identifier | ||
| DEPARTMENT_ID | NUMBER | Department identifier | ||
| COST_TYPE_ID | NUMBER | Cost type identifier | ||
| COST_TYPE | VARCHAR2 | (10) | Cost type name | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ALLOW_UPDATES_FLAG | NUMBER | Whether the costs defined for this cost type can be changed |
APPS.CST_DEPOVH_COST_TYPES_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_ORGANIZATION_ID | NUMBER | Y | Costing Organization Identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQUENCE_ID | NUMBER | Operation sequence identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number in a routing | ||
| DEPARTMENT_ID | NUMBER | Department identifier | ||
| LEVEL_TYPE | NUMBER | Y | Level at which cost is incurred | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| RESOURCE_SEQ_NUM | NUMBER | Resource sequence number in an operation | ||
| RESOURCE_ID | NUMBER | Resource identifier (sub-element) | ||
| RESOURCE_RATE | NUMBER | Resource unit cost (resource sub-element only) | ||
| ITEM_UNITS | NUMBER | Number of item units the activity cost is applied to | ||
| ACTIVITY_UNITS | NUMBER | Number of activity units applied to the item cost | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Number of resource units, overhead rate, or activity unit cost per basis | |
| BASIS_TYPE | NUMBER | Y | Allocation basis | |
| BASIS_RESOURCE_ID | NUMBER | Resource identifier for the resource overhead is based on | ||
| BASIS_FACTOR | NUMBER | Y | Basis factor | |
| NET_YIELD_OR_SHRINKAGE_FACTOR | NUMBER | Y | Item shrinkage factor computed from the item shrinkage | |
| ITEM_COST | NUMBER | Y | Net item cost for this row | |
| COST_ELEMENT_ID | NUMBER | Cost element identifier | ||
| ROLLUP_SOURCE_TYPE | NUMBER | Y | Cost source | |
| ACTIVITY_CONTEXT | VARCHAR2 | (30) | Structure defining column for the Activity Unit Information | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
APPS.CST_DETAIL_COSTS_FOR_GL_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| BASIS | VARCHAR2 | (80) | Allocation Basis | |
| COST_ELEMENT | VARCHAR2 | (80) | Cost element name | |
| COST_ELEMENT_ID | NUMBER | cost element identifier | ||
| COST_ELEMENT_DESCRIPTION | VARCHAR2 | (240) | Cost element description | |
| COST_LEVEL | VARCHAR2 | (80) | Level at which cost is incurred | |
| ACTIVITY | VARCHAR2 | (10) | Activity name | |
| ACTIVITY_DESCRIPTION | VARCHAR2 | (240) | Activity Description | |
| RESOURCE_CODE | VARCHAR2 | (10) | Resource code | |
| RESOURCE_CODE_DESCRIPTION | VARCHAR2 | (240) | Resource code description | |
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number in a routing | ||
| OPERATION_DESCRIPTION | VARCHAR2 | (240) | Operation description | |
| DEPARTMENT | VARCHAR2 | (10) | Department name | |
| DEPARTMENT_DESCRIPTION | VARCHAR2 | (240) | Department description | |
| RESOURCE_RATE | NUMBER | Resource unit cost | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Number of resource units, overhead rate, or activity unit cost per basis | |
| BASIS_FACTOR | NUMBER | Y | Basis factor | |
| NET_YIELD_OR_SHRINKAGE_FACTOR | NUMBER | Y | Item shrinkage factor computed from the item shrinkage | |
| ITEM_UNITS | NUMBER | Number of item units the activity cost is applied to | ||
| ACTIVITY_UNITS | NUMBER | Number of activity units applied to the item cost | ||
| OUTPUT_UOM | VARCHAR2 | (50) | Activity measurement unit | |
| UNIT_OF_MEASURE | VARCHAR2 | (3) | Unit of measure | |
| VALUE_ADDED_ACTIVITY_FLAG | VARCHAR2 | (150) | Flag indicating whether the activity adds value | |
| ITEM_COST | NUMBER | Y | Total item unit cost for this row | |
| COST_SOURCE_TYPE | VARCHAR2 | (80) | Cost source | |
| CA_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CA_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CA_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CA_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CA_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CA_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CA_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CA_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CA_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CA_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CA_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CA_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CA_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CA_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CA_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| BR_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| LEVEL_TYPE | NUMBER | Y |
APPS.CST_DETAIL_COST_VIEW is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | |||
| WIP_ENTITY_ID | NUMBER | |||
| PRIMARY_ITEM_ID | NUMBER | |||
| LINE_ID | NUMBER | |||
| ACCT_PERIOD_ID | NUMBER | |||
| TRANSACTION_TYPE_NAME | VARCHAR2 | (80) | ||
| TRANSACTION_DATE | DATE | |||
| TRANSACTION_QUANTITY | NUMBER | |||
| TRANSACTION_UOM | VARCHAR2 | (3) | ||
| PRIMARY_QUANTITY | NUMBER | |||
| PRIMARY_UOM | VARCHAR2 | (3) | ||
| OPERATION_SEQ_NUM | NUMBER | |||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| REFERENCE | VARCHAR2 | (240) | ||
| INVENTORY_ITEM_ID | NUMBER | |||
| REVISION | VARCHAR2 | (3) | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| RESOURCE_SEQ_NUM | NUMBER | |||
| REFERENCE_ACCOUNT | NUMBER | |||
| RESOURCE_CODE | VARCHAR2 | (10) | ||
| REPETITIVE_SCHEDULE_ID | NUMBER | |||
| LINE_TYPE_NAME | VARCHAR2 | (80) | ||
| TRANSACTION_VALUE | NUMBER | |||
| BASE_TRANSACTION_VALUE | NUMBER | |||
| CONTRA_SET_ID | NUMBER | |||
| BASIS | VARCHAR2 | (80) | ||
| COST_ELEMENT | VARCHAR2 | (18) | ||
| RATE_OR_AMOUNT | NUMBER | |||
| GL_BATCH_ID | NUMBER | |||
| OVERHEAD_BASIS_FACTOR | NUMBER | |||
| BASIS_RESOURCE_ID | NUMBER | |||
| TRANSACTION_SOURCE | VARCHAR2 | (20) | ||
| UNIT_COST | VARCHAR2 | (40) | ||
| ROW_ID | ROWID | (10) | ||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | |||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | |||
| LAST_UPDATE_LOGIN | NUMBER | |||
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE | |||
| ASSET_NUMBER | VARCHAR2 | (30) | ||
| ASSET_GROUP_ID | NUMBER | |||
| REBUILD_ITEM_ID | NUMBER | |||
| REBUILD_SERIAL_NUMBER | VARCHAR2 | (30) |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | |||
| WIP_ENTITY_ID | NUMBER | |||
| WIP_ENTITY_NAME | VARCHAR2 | (240) | ||
| PRIMARY_ITEM_ID | NUMBER | |||
| LINE_ID | NUMBER | |||
| LINE_CODE | VARCHAR2 | (10) | ||
| ACCT_PERIOD_ID | NUMBER | |||
| TRANSACTION_TYPE_NAME | VARCHAR2 | (80) | ||
| TRANSACTION_DATE | DATE | |||
| TRANSACTION_QUANTITY | NUMBER | |||
| TRANSACTION_UOM | VARCHAR2 | (3) | ||
| PRIMARY_QUANTITY | NUMBER | |||
| PRIMARY_UOM | VARCHAR2 | (3) | ||
| OPERATION_SEQ_NUM | NUMBER | |||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| DEPARTMENT_CODE | VARCHAR2 | (10) | ||
| DEPARTMENT_DESCRIPTION | VARCHAR2 | (240) | ||
| REASON_NAME | VARCHAR2 | (30) | ||
| REFERENCE | VARCHAR2 | (240) | ||
| INVENTORY_ITEM_ID | NUMBER | |||
| REVISION | VARCHAR2 | (3) | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| RESOURCE_SEQ_NUM | NUMBER | |||
| REFERENCE_ACCOUNT | NUMBER | |||
| RESOURCE_CODE | VARCHAR2 | (10) | ||
| REPETITIVE_SCHEDULE_ID | NUMBER | |||
| LINE_TYPE_NAME | VARCHAR2 | (80) | ||
| TRANSACTION_VALUE | NUMBER | |||
| BASE_TRANSACTION_VALUE | NUMBER | |||
| CONTRA_SET_ID | NUMBER | |||
| BASIS | VARCHAR2 | (80) | ||
| COST_ELEMENT | VARCHAR2 | (18) | ||
| ACTIVITY | VARCHAR2 | (10) | ||
| RATE_OR_AMOUNT | NUMBER | |||
| GL_BATCH_ID | NUMBER | |||
| OVERHEAD_BASIS_FACTOR | NUMBER | |||
| BASIS_RESOURCE_ID | NUMBER | |||
| TRANSACTION_SOURCE | VARCHAR2 | (20) | ||
| UNIT_COST | VARCHAR2 | (40) | ||
| ROW_ID | ROWID | (10) | ||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | |||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | |||
| LAST_UPDATE_LOGIN | NUMBER | |||
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE | |||
| ASSET_NUMBER | VARCHAR2 | (30) | ||
| ASSET_GROUP_ID | NUMBER | |||
| REBUILD_ITEM_ID | NUMBER | |||
| REBUILD_SERIAL_NUMBER | VARCHAR2 | (30) |
APPS.CST_DISTRIBUTION_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| WIP_ENTITY_ID | NUMBER | WIP job or repetitive assembly identifier | ||
| LINE_ID | NUMBER | WIP repetitive line identifier | ||
| ACCT_PERIOD_ID | NUMBER | Accounting period identifier | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| REFERENCE_ACCOUNT | NUMBER | Transaction distribution account | ||
| TRANSACTION_DATE | DATE | Date transaction was performed | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number within a routing | ||
| TRANSACTION_TYPE_ID | NUMBER | Transaction type code | ||
| ITEM_OR_RESOURCE_ID | NUMBER | Inventory item identifier or resource identifier | ||
| PRIMARY_QUANTITY | NUMBER | Transaction quantity in the primary unit of measure | ||
| EXTENDED_COST | NUMBER | Total cost of the transaction | ||
| PRIMARY_UOM | VARCHAR2 | (3) | Primary unit of measure | |
| UNIT_COST | NUMBER | Total unit cost | ||
| BASIS | VARCHAR2 | (80) | Basis name for charging resource | |
| RESOURCE_SEQ_NUM | NUMBER | Resource sequence number | ||
| TRANSACTION_ID | NUMBER | Transaction identifier | ||
| COST_ELEMENT_ID | NUMBER | Cost element identifier |
APPS.CST_DISTRIBUTION_VIEW is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| MAINT_COST_CATEGORY | NUMBER | Identifier for Maintenance Cost Category | ||
| ACTIVITY_ESTIMATE_RECORD_ID | NUMBER | Identifier for activity estimate record | ||
| MEANING | VARCHAR2 | (80) | Y | Maintenance Cost Category |
| EQUIPMENT | NUMBER | Equipment Cost | ||
| LABOR | NUMBER | Labor Cost | ||
| MATERIAL | NUMBER | Material Cost | ||
| TOTAL | NUMBER | Total Cost |
APPS.CST_EAM_ACTIVITY_ESTIMATES_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| PERIOD_START_DATE | DATE | Y | Start Date of a particular period | |
| NAME | VARCHAR2 | (80) | Y | Cost Category |
| INV_ID | NUMBER | Inventory item identifier | ||
| CONCATENATED_SEGMENTS | VARCHAR2 | (40) | Concatenation of segments, which corresponds to Asset Group Name | |
| ORG_ID | NUMBER | Y | Organization Identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Serial Number of an Asset | |
| TOTAL | NUMBER | Total Cost | ||
| MATERIAL | NUMBER | Cost belonging to the cost element Material | ||
| LABOR | NUMBER | Cost belonging to the cost element Labor | ||
| EQUIPMENT | NUMBER | Cost belonging to the cost element Equipment |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| PERIOD_START_DATE | DATE | Y | Start Date of a particular period | |
| NAME | VARCHAR2 | (80) | Y | Cost Category |
| INV_ID | NUMBER | Inventory item identifier | ||
| CONCATENATED_SEGMENTS | VARCHAR2 | (40) | Concatenation of segments, which corresponds to Asset Group Name | |
| ORG_ID | NUMBER | Y | Organization Identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Serial Number of an Asset | |
| TOTAL | NUMBER | Total Cost | ||
| MATERIAL | NUMBER | Cost belonging to the cost element Material | ||
| LABOR | NUMBER | Cost belonging to the cost element Labor | ||
| EQUIPMENT | NUMBER | Cost belonging to the cost element Equipment |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| PERIOD_START_DATE | DATE | Y | Start Date of a particular period | |
| NAME | VARCHAR2 | (80) | Y | Cost Category |
| INV_ID | NUMBER | Inventory item identifier | ||
| CONCATENATED_SEGMENTS | VARCHAR2 | (40) | Concatenation of segments, which corresponds to Asset Group Name | |
| ORG_ID | NUMBER | Y | Organization Identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Serial Number of an Asset | |
| TOTAL | NUMBER | Total Cost | ||
| MATERIAL | NUMBER | Cost belonging to the cost element Material | ||
| LABOR | NUMBER | Cost belonging to the cost element Labor | ||
| EQUIPMENT | NUMBER | Cost belonging to the cost element Equipment |
APPS.CST_EAM_ASSET_BY_DEPT_VAR_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INV_ID | NUMBER | Inventory item identifier | ||
| CONCATENATED_SEGMENTS | VARCHAR2 | (40) | Concatenation of segments, which corresponds to Asset Group Name | |
| ORG_ID | NUMBER | Y | Organization Identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Serial Number of an Asset | |
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| PERIOD_START_DATE | DATE | Y | Start Date of a particular period | |
| TOTAL | NUMBER | Total Cost | ||
| MATERIAL | NUMBER | Cost belonging to the cost element Material | ||
| LABOR | NUMBER | Cost belonging to the cost element Labor | ||
| EQUIPMENT | NUMBER | Cost belonging to the cost element Equipment |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INV_ID | NUMBER | Inventory item identifier | ||
| CONCATENATED_SEGMENTS | VARCHAR2 | (40) | Concatenation of segments, which corresponds to Asset Group Name | |
| ORG_ID | NUMBER | Y | Organization Identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Serial Number of an Asset | |
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| PERIOD_START_DATE | DATE | Y | Start Date of a particular period | |
| TOTAL | NUMBER | Total Cost | ||
| MATERIAL | NUMBER | Cost belonging to the cost element Material | ||
| LABOR | NUMBER | Cost belonging to the cost element Labor | ||
| EQUIPMENT | NUMBER | Cost belonging to the cost element Equipment |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INV_ID | NUMBER | Inventory item identifier | ||
| CONCATENATED_SEGMENTS | VARCHAR2 | (40) | Concatenation of segments, which corresponds to Asset Group Name | |
| ORG_ID | NUMBER | Y | Organization Identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Serial Number of an Asset | |
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| PERIOD_START_DATE | DATE | Y | Start Date of a particular period | |
| TOTAL | NUMBER | Total Cost | ||
| MATERIAL | NUMBER | Cost belonging to the cost element Material | ||
| LABOR | NUMBER | Cost belonging to the cost element Labor | ||
| EQUIPMENT | NUMBER | Cost belonging to the cost element Equipment |
APPS.CST_EAM_ASSET_BY_PERIODS_VAR_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| GROUP_ID | NUMBER | Y | Group identifier identifying the batch when the rollup was performed | |
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| PERIOD_START_DATE | DATE | Y | Start Date of a particular period | |
| INV_ID | NUMBER | Y | Inventory item identifier | |
| CONCATENATED_SEGMENTS | VARCHAR2 | (40) | Concatenation of segments, which corresponds to Asset Group Name | |
| ORG_ID | NUMBER | Y | Organization Identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Y | Serial Number of an Asset |
| TOTAL | NUMBER | Total Rollup Cost | ||
| MATERIAL | NUMBER | Rollup Cost belonging to the cost element Material | ||
| LABOR | NUMBER | Rollup Cost belonging to the cost element Labor | ||
| EQUIPMENT | NUMBER | Rollup Cost belonging to the cost element Equipment |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| GROUP_ID | NUMBER | Y | Group identifier identifying the batch when the rollup was performed | |
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| PERIOD_START_DATE | DATE | Y | Start Date of a particular period | |
| INV_ID | NUMBER | Y | Inventory item identifier | |
| CONCATENATED_SEGMENTS | VARCHAR2 | (40) | Concatenation of segments, which corresponds to Asset Group Name | |
| ORG_ID | NUMBER | Y | Organization Identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Y | Serial Number of an Asset |
| TOTAL | NUMBER | Total Rollup Cost | ||
| MATERIAL | NUMBER | Rollup Cost belonging to the cost element Material | ||
| LABOR | NUMBER | Rollup Cost belonging to the cost element Labor | ||
| EQUIPMENT | NUMBER | Rollup Cost belonging to the cost element Equipment |
APPS.CST_EAM_ROLLUP_BYPERIODS_VAR_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| GROUP_ID | NUMBER | Y | Group identifier identifying the batch when the rollup was performed | |
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| PERIOD_START_DATE | DATE | Y | Start Date of a particular period | |
| NAME | VARCHAR2 | (80) | Y | Cost Category |
| INV_ID | NUMBER | Y | Inventory item identifier | |
| CONCATENATED_SEGMENTS | VARCHAR2 | (40) | Concatenation of segments, which corresponds to Asset Group Name | |
| ORG_ID | NUMBER | Y | Organization Identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Y | Serial Number of an Asset |
| TOTAL | NUMBER | Total Rollup Cost | ||
| MATERIAL | NUMBER | Rollup Cost belonging to the cost element Material | ||
| LABOR | NUMBER | Rollup Cost belonging to the cost element Labor | ||
| EQUIPMENT | NUMBER | Rollup Cost belonging to the cost element Equipment |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| GROUP_ID | NUMBER | Y | Group identifer identifying the batch when the rollup was performed | |
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| PERIOD_START_DATE | DATE | Y | Start Date of a particular period | |
| NAME | VARCHAR2 | (80) | Y | Cost Category |
| INV_ID | NUMBER | Y | Inventory item identifier | |
| CONCATENATED_SEGMENTS | VARCHAR2 | (40) | Concatenation of segments, which corresponds to Asset Group Name | |
| ORG_ID | NUMBER | Y | Organization Identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Y | Serial Number of an Asset |
| TOTAL | NUMBER | Total Rollup Cost | ||
| MATERIAL | NUMBER | Rollup Cost belonging to the cost element Material | ||
| LABOR | NUMBER | Rollup Cost belonging to the cost element Labor | ||
| EQUIPMENT | NUMBER | Rollup Cost belonging to the cost element Equipment |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| GROUP_ID | NUMBER | Y | Group identifier identifying the batch when the rollup was performed | |
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| PERIOD_START_DATE | DATE | Y | Start Date of a particular period | |
| NAME | VARCHAR2 | (80) | Y | Cost Category |
| INV_ID | NUMBER | Y | Inventory item identifier | |
| CONCATENATED_SEGMENTS | VARCHAR2 | (40) | Concatenation of segments, which corresponds to Asset Group Name | |
| ORG_ID | NUMBER | Y | Organization Identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Y | Serial Number of an Asset |
| TOTAL | NUMBER | Total Rollup Cost | ||
| MATERIAL | NUMBER | Rollup Cost belonging to the cost element Material | ||
| LABOR | NUMBER | Rollup Cost belonging to the cost element Labor | ||
| EQUIPMENT | NUMBER | Rollup Cost belonging to the cost element Equipment |
APPS.CST_EAM_ROLLUP_BY_DEPT_VAR_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| GROUP_ID | NUMBER | Y | Group identifier identifying the batch when the rollup was performed | |
| PERIOD_SET_NAME | VARCHAR2 | (15) | Y | Period Set Name |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name |
| PERIOD_START_DATE | DATE | Y | Start Date of a particular period | |
| INV_ID | NUMBER | Y | Inventory item identifier | |
| CONCATENATED_SEGMENTS | VARCHAR2 | (40) | Concatenation of segments, which corresponds to Asset Group Name | |
| ORG_ID | NUMBER | Y | Organization Identifier | |
| SERIAL_NUMBER | VARCHAR2 | (30) | Y | Serial Number of an Asset |
| TOTAL | NUMBER | Total Rollup Cost | ||
| MATERIAL | NUMBER | Rollup Cost belonging to the cost element Material | ||
| LABOR | NUMBER | Rollup Cost belonging to the cost element Labor | ||
| EQUIPMENT | NUMBER | Rollup Cost belonging to the cost element Equipment |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | VARCHAR2 | (0) | Unused | |
| OPERATION_SEQUENCE_ID | VARCHAR2 | (0) | Unused | |
| DEPARTMENT_ID | VARCHAR2 | (0) | Unused | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| RESOURCE_ID | VARCHAR2 | (0) | Unused | |
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | NUMBER | Cost element identifier | ||
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN1_VALUE_2B | VARCHAR2 | (50) | Cost element name | |
| COLUMN2_VALUE_2B | VARCHAR2 | (10) | Activity name | |
| DESCRIPTION_COLUMN | VARCHAR2 | (240) | Description | |
| GUI_COLUMN1 | VARCHAR2 | (50) | Cost element name | |
| GUI_COLUMN2 | VARCHAR2 | (10) | Activity name | |
| GUI_DESCRIPTION | VARCHAR2 | (240) | Description |
APPS.CST_ELEMENT_ACTIVITY_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | VARCHAR2 | (0) | Unused | |
| OPERATION_SEQUENCE_ID | VARCHAR2 | (0) | Unused | |
| DEPARTMENT_ID | VARCHAR2 | (0) | Unused | |
| ACTIVITY_ID | VARCHAR2 | (0) | Unused | |
| RESOURCE_ID | NUMBER | Resource identifier (sub-element) | ||
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | NUMBER | Cost element identifier | ||
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN1_VALUE_2B | VARCHAR2 | (50) | Cost element name | |
| COLUMN2_VALUE_2B | VARCHAR2 | (10) | Resource code | |
| DESCRIPTION_COLUMN | VARCHAR2 | (240) | Description | |
| GUI_COLUMN1 | VARCHAR2 | (50) | Cost element name | |
| GUI_COLUMN2 | VARCHAR2 | (10) | Resource code | |
| GUI_DESCRIPTION | VARCHAR2 | (240) | Description |
APPS.CST_ELEMENT_CODE_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | VARCHAR2 | (0) | Unused | |
| OPERATION_SEQUENCE_ID | VARCHAR2 | (0) | Unused | |
| DEPARTMENT_ID | VARCHAR2 | (0) | Unused | |
| ACTIVITY_ID | VARCHAR2 | (0) | Unused | |
| RESOURCE_ID | VARCHAR2 | (0) | Unused | |
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | NUMBER | Cost element identifier | ||
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (50) | Cost element name | |
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN1_VALUE_2B | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2B | VARCHAR2 | (50) | Cost element name | |
| DESCRIPTION_COLUMN | VARCHAR2 | (240) | Description | |
| GUI_COLUMN1 | VARCHAR2 | (0) | Unused | |
| GUI_COLUMN2 | VARCHAR2 | (50) | Cost element name | |
| GUI_DESCRIPTION | VARCHAR2 | (240) | Description |
APPS.CST_ELEMENT_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | VARCHAR2 | (0) | Unused | |
| OPERATION_SEQUENCE_ID | VARCHAR2 | (0) | Unused | |
| DEPARTMENT_ID | NUMBER | Department identifier | ||
| ACTIVITY_ID | VARCHAR2 | (0) | Unused | |
| RESOURCE_ID | VARCHAR2 | (0) | Unused | |
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | NUMBER | Cost element identifier | ||
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN1_VALUE_2B | VARCHAR2 | (50) | Cost element name | |
| COLUMN2_VALUE_2B | VARCHAR2 | (10) | Department code | |
| DESCRIPTION_COLUMN | VARCHAR2 | (240) | Description | |
| GUI_COLUMN1 | VARCHAR2 | (50) | Cost element name | |
| GUI_COLUMN2 | VARCHAR2 | (10) | Department code | |
| GUI_DESCRIPTION | VARCHAR2 | (240) | Description |
APPS.CST_ELEMENT_DEPT_COST_VIEW is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | |||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| COST_TYPE_ID | NUMBER | Y | ||
| OPERATION_SEQ_NUM | VARCHAR2 | (0) | ||
| OPERATION_SEQUENCE_ID | VARCHAR2 | (0) | ||
| DEPARTMENT_ID | VARCHAR2 | (0) | ||
| ACTIVITY_ID | VARCHAR2 | (0) | ||
| RESOURCE_ID | VARCHAR2 | (0) | ||
| ITEM_COST | NUMBER | |||
| COST_ELEMENT_ID | NUMBER | |||
| THIS_LEVEL_COSTS | NUMBER | |||
| PREVIOUS_LEVEL_COSTS | NUMBER | |||
| YIELDED_COSTS | NUMBER | |||
| COLUMN1_VALUE_2A | VARCHAR2 | (50) | ||
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | ||
| COLUMN1_VALUE_2B | VARCHAR2 | (0) | ||
| COLUMN2_VALUE_2B | VARCHAR2 | (50) | ||
| DESCRIPTION_COLUMN | VARCHAR2 | (240) | ||
| GUI_COLUMN1 | VARCHAR2 | (0) | ||
| GUI_COLUMN2 | VARCHAR2 | (50) | ||
| GUI_DESCRIPTION | VARCHAR2 | (240) |
APPS.CST_ELEMENT_OPYLD_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number in a routing | ||
| OPERATION_SEQUENCE_ID | NUMBER | Operation sequence identifier | ||
| DEPARTMENT_ID | VARCHAR2 | (0) | Unused | |
| ACTIVITY_ID | VARCHAR2 | (0) | Unused | |
| RESOURCE_ID | VARCHAR2 | (0) | Unused | |
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | NUMBER | Cost element identifier | ||
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN1_VALUE_2B | VARCHAR2 | (50) | Cost element name | |
| COLUMN2_VALUE_2B | NUMBER | Operation sequence number in a routing | ||
| DESCRIPTION_COLUMN | VARCHAR2 | (240) | Operation description | |
| GUI_COLUMN1 | VARCHAR2 | (50) | Cost element name | |
| GUI_COLUMN2 | NUMBER | Operation sequence number in a routing | ||
| GUI_DESCRIPTION | VARCHAR2 | (240) | Operation description |
APPS.CST_ELEMENT_OP_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORG_ID | NUMBER | (15) | Organization identifier | |
| PERIOD | VARCHAR2 | (15) | Period name | |
| PERIOD_YEAR | NUMBER | Period year | ||
| PERIOD_NUM | NUMBER | Accounting Period Number | ||
| CODE | VARCHAR2 | (15) | Currency code | |
| RATE_TYPE | NUMBER | Rate type: average rate or end of period rate | ||
| INVERSE | VARCHAR2 | (30) | Inverse of currency rate flag | |
| DISPLAY_RATE | VARCHAR2 | (40) | Display Rate based on the Inverse of currency rate flag | |
| ACTUAL_RATE | NUMBER | Actual currency rate |
APPS.CST_GL_TRANSLATION_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INTRANSIT_OWNING_ORG_ID | NUMBER | Owner organization identifier | ||
| COST_GROUP_ID | NUMBER | |||
| FROM_ORGANIZATION_ID | NUMBER | Sending organizaiton identifier | ||
| FROM_SUBINVENTORY | VARCHAR2 | (10) | Sending subinventory | |
| TO_ORGANIZATION_ID | NUMBER | Destination organization identifier | ||
| TO_SUBINVENTORY | VARCHAR2 | (10) | Destination subinventory | |
| SUPPLY_TYPE_CODE | VARCHAR2 | (25) | Y | Supply Type Code from MTL_SUPPLY |
| FOB_POINT | NUMBER | Freight on board point | ||
| SHIPMENT_NUM | VARCHAR2 | (30) | Shipment number | |
| RECEIPT_NUM | VARCHAR2 | (30) | Receipt number | |
| FREIGHT_CARRIER_CODE | VARCHAR2 | (25) | Freight carrier code | |
| WAYBILL_AIRBILL_NUM | VARCHAR2 | (20) | Waybill / airbill number | |
| NUM_OF_CONTAINERS | NUMBER | Number of containers | ||
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier | ||
| REVISION | VARCHAR2 | (3) | Inventory item revision | |
| QUANTITY | NUMBER | Y | Actual shipment quantity | |
| UNIT_OF_MEASURE | VARCHAR2 | (25) | Y | Unit of measure for actual shipment quantity |
| UOM_CODE | VARCHAR2 | (3) | Y | Unit of measure code for actual shipment quantity |
| TO_ORG_PRIMARY_QUANTITY | NUMBER | Shipment quantity in primary unit of measure of item in destination organization | ||
| TO_ORG_PRIMARY_UOM | VARCHAR2 | (25) | Primary unit of measure of item in destination organization | |
| TO_ORG_PRIMARY_UOM_CODE | VARCHAR2 | (3) | Y | Primary unit of measure of item in destination organization |
| RECEIPT_DATE | DATE | Receipt date | ||
| NEED_BY_DATE | DATE | Need by date | ||
| EXPECTED_DELIVERY_DATE | DATE | Expected delivery date | ||
| SHIPPED_DATE | DATE | Shipped date | ||
| DESTINATION_TYPE_CODE | VARCHAR2 | (25) | Y | Destination type |
| SHIPMENT_LINE_STATUS_CODE | VARCHAR2 | (25) | Shipment line status | |
| SOURCE_DOCUMENT_CODE | VARCHAR2 | (25) | Shipment source document type | |
| DELIVER_TO_LOCATION_ID | NUMBER | Deliver to location identifier | ||
| CHARGE_ACCOUNT_ID | NUMBER | Charge account identifier | ||
| TRANSPORTATION_ACCOUNT_ID | NUMBER | Transportation account identifier | ||
| SHIPMENT_UNIT_PRICE | NUMBER | Shipment unit price | ||
| TRANSFER_COST | NUMBER | Transfer cost | ||
| TRANSPORTATION_COST | NUMBER | Transportation cost | ||
| SHIPMENT_LINE_ID | NUMBER | Y |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ORGANIZATION_ID | NUMBER | Transaction Organization Idnetifier | ||
| TRANSACTION_ID | NUMBER | Transaction identifier | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier | ||
| DESCRIPTION | VARCHAR2 | (240) | Description of the reason | |
| REVISION | VARCHAR2 | (3) | Revision Identifier | |
| SUBINVENTORY_CODE | VARCHAR2 | (10) | Subinventory Code | |
| LOCATOR_ID | NUMBER | Locator Identifier | ||
| TRANSACTION_TYPE_ID | NUMBER | Transaction Type Identifier | ||
| TRANSACTION_TYPE_NAME | VARCHAR2 | (80) | Transaction Type Name | |
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Transaction Source Type Identifier | ||
| TRANSACTION_SOURCE_TYPE_NAME | VARCHAR2 | (30) | Transaction Source Type Name | |
| TRANSACTION_SOURCE_ID | NUMBER | Transaction Source Identifier | ||
| TRANSACTION_SOURCE_NAME | VARCHAR2 | (80) | Transaction Source Name | |
| TRANSACTION_DATE | DATE | Transaction date | ||
| TRANSACTION_QUANTITY | NUMBER | Transaction quantity | ||
| TRANSACTION_UOM | VARCHAR2 | (3) | Transaction Unit of Measure | |
| PRIMARY_QUANTITY | NUMBER | Transaction quantity in terms of primary UOM of item | ||
| PRIMARY_UOM | VARCHAR2 | (3) | Primary Unit of Measure | |
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number within a routing | ||
| CURRENCY_CODE | VARCHAR2 | (15) | Currency conversion code | |
| CURRENCY_CONVERSION_DATE | DATE | Currency conversion date | ||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | Currency conversion type | |
| CURRENCY_CONVERSION_RATE | NUMBER | Currency conversion rate | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | Transaction department code | |
| REASON_NAME | VARCHAR2 | (30) | Reason name | |
| TRANSACTION_REFERENCE | VARCHAR2 | (240) | Transaction reference code | |
| REFERENCE_ACCOUNT | NUMBER | Transaction reference account (code_combination_id) | ||
| ACCOUNTING_LINE_TYPE | NUMBER | Accounting line type | ||
| LINE_TYPE_NAME | VARCHAR2 | (80) | Accounting line type name | |
| TRANSACTION_VALUE | NUMBER | Accounting value for the transaction | ||
| BASE_TRANSACTION_VALUE | NUMBER | Base Transaction Value | ||
| BASIS_TYPE_NAME | VARCHAR2 | (80) | Base type name | |
| COST_ELEMENT_ID | NUMBER | Cost Element Identifier | ||
| ACTIVITY | VARCHAR2 | (10) | Activity name | |
| RATE_OR_AMOUNT | NUMBER | Rate or Amount | ||
| GL_BATCH_ID | NUMBER | Batch identifier for all downloaded transaction journal entries (set to -1 if not yet transferred) | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Resource Code | |
| UNIT_COST | VARCHAR2 | (40) | Unit Cost | |
| ROW_ID | ROWID | (10) | Row Identifier | |
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| MSI_INVENTORY_ITEM_ID | NUMBER | Item Identifier | ||
| MSI_ORGANIZATION_ID | NUMBER | Organization Identifier | ||
| MTA_TRANSACTION_DATE | DATE | |||
| PARENT_TRANSACTION_ID | NUMBER | Transaction ID of transaction flow parent | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization Code | |
| LOGICAL_TRX_TYPE | VARCHAR2 | (80) | Logical Transaction Type Code |
APPS.CST_INV_DISTRIBUTION_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| LAYER_ID | NUMBER | Y | ||
| INV_LAYER_ID | NUMBER | Y | ||
| LEVEL_TYPE | NUMBER | Y | ||
| MEANING | VARCHAR2 | (80) | ||
| LAYER_COST | NUMBER | |||
| COST_ELEMENT | VARCHAR2 | (50) | Y | |
| COST_ELEMENT_ID | NUMBER | Y |
APPS.CST_INV_LAYER_COST_DETAILS_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| INVENTORY_ASSET_FLAG | NUMBER | Y | Flag indicating whether the item is asset or expense | |
| LOT_SIZE | NUMBER | Lot Size | ||
| BASED_ON_ROLLUP_FLAG | NUMBER | Flag indicating whether cost will be rolled up | ||
| SHRINKAGE_RATE | NUMBER | Manufacturing shrinkage rate (for make item only) | ||
| DEFAULTED_FLAG | NUMBER | Y | Flag indicating whether the cost of the item is defaulted from the default cost type during cost roll up | |
| COST_UPDATE_ID | NUMBER | Cost update session identifier | ||
| PL_MATERIAL | NUMBER | Previous level material cost | ||
| PL_MATERIAL_OVERHEAD | NUMBER | Previous level material overhead cost | ||
| PL_RESOURCE | NUMBER | Previous level resource cost | ||
| PL_OUTSIDE_PROCESSING | NUMBER | Previous level outside processing cost | ||
| PL_OVERHEAD | NUMBER | Previous level overhead cost | ||
| TL_MATERIAL | NUMBER | This level material cost | ||
| TL_MATERIAL_OVERHEAD | NUMBER | This level material overhead cost | ||
| TL_RESOURCE | NUMBER | This level resource cost | ||
| TL_OUTSIDE_PROCESSING | NUMBER | This level outside processing cost | ||
| TL_OVERHEAD | NUMBER | This level overhead cost | ||
| MATERIAL_COST | NUMBER | Material cost | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material overhead cost | ||
| RESOURCE_COST | NUMBER | Resource cost | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside Processing cost | ||
| OVERHEAD_COST | NUMBER | Overhead cost | ||
| PL_ITEM_COST | NUMBER | Total previous level cost | ||
| TL_ITEM_COST | NUMBER | Total this level cost | ||
| ITEM_COST | NUMBER | Total item unit cost | ||
| UNBURDENED_COST | NUMBER | Item unit cost minus this level material overhead | ||
| BURDEN_COST | NUMBER | This level material overhead | ||
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| PL_MATERIAL | NUMBER | Previous level material cost | ||
| PL_MATERIAL_OVERHEAD | NUMBER | Previous level material overhead cost | ||
| PL_RESOURCE | NUMBER | Previous level resource cost | ||
| PL_OUTSIDE_PROCESSING | NUMBER | Previous level outside processing cost | ||
| PL_OVERHEAD | NUMBER | Previous level overhead cost | ||
| TL_MATERIAL | NUMBER | This level material cost | ||
| TL_MATERIAL_OVERHEAD | NUMBER | This level material overhead cost | ||
| TL_RESOURCE | NUMBER | This level resource cost | ||
| TL_OUTSIDE_PROCESSING | NUMBER | This level outside processing cost | ||
| TL_OVERHEAD | NUMBER | This level overhead cost | ||
| MATERIAL_COST | NUMBER | Material cost | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material overhead cost | ||
| RESOURCE_COST | NUMBER | Resource cost | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside Processing cost | ||
| OVERHEAD_COST | NUMBER | Overhead cost | ||
| PL_ITEM_COST | NUMBER | Total previous level cost | ||
| TL_ITEM_COST | NUMBER | Total this level cost | ||
| ITEM_COST | NUMBER | Item unit cost | ||
| UNBURDENED_COST | NUMBER | Item unit cost minus this level material overhead | ||
| BURDEN_COST | NUMBER | This level material overhead |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row Identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| OPERATION_SEQUENCE_ID | NUMBER | Operation sequence identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number in a routing | ||
| DEPARTMENT_ID | NUMBER | Department identifier | ||
| LEVEL_TYPE | NUMBER | Y | Level at which cost is incurred | |
| LEVEL_TYPE_DSP | VARCHAR2 | (80) | Y | Level Type Display |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| ACTIVITY | VARCHAR2 | (10) | Activity | |
| RESOURCE_SEQ_NUM | NUMBER | Resource sequence number in an operation | ||
| RESOURCE_ID | NUMBER | Resource identifier (sub-element) | ||
| RESOURCE_CODE | VARCHAR2 | (10) | Resource Code | |
| UNIT_OF_MEASURE | VARCHAR2 | (3) | Unit Of Measure | |
| RESOURCE_RATE | NUMBER | Resource unit cost | ||
| ITEM_UNITS | NUMBER | Number of item units the activity cost is applied to | ||
| ACTIVITY_UNITS | NUMBER | Number of activity units applied to the item cost | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Number of resource units, overhead rate, or activity unit cost per basis | |
| BASIS_TYPE | NUMBER | Y | Basis | |
| BASIS_TYPE_DSP | VARCHAR2 | (80) | Y | Basis type display |
| BASIS_RESOURCE_ID | NUMBER | Resource identifier for the resource overhead is based on | ||
| BASIS_FACTOR | NUMBER | Y | Basis factor | |
| NET_YIELD_OR_SHRINKAGE_FACTOR | NUMBER | Y | Item shrinkage factor computed from the item shrinkage | |
| ITEM_COST | NUMBER | Y | Item unit cost | |
| COST_ELEMENT_ID | NUMBER | Cost element identifier | ||
| COST_ELEMENT | VARCHAR2 | (50) | Y | Cost Element Name |
| SOURCE_TYPE | VARCHAR2 | (80) | Y | Source Type |
| ROLLUP_SOURCE_TYPE | NUMBER | Y | Cost source | |
| ACTIVITY_CONTEXT | VARCHAR2 | (30) | Structure defining column for the Activity Unit Information | |
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who column | ||
| PROGRAM_ID | NUMBER | Concurrent who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| YIELDED_COST | NUMBER | Inflation in item cost due to operation yield in WSM organizations |
APPS.CST_ITEM_COST_DETAILS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ITEM_NUMBER | VARCHAR2 | (40) | ||
| PADDED_ITEM_NUMBER | VARCHAR2 | (40) | ||
| DESCRIPTION | VARCHAR2 | (240) | ||
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| COST_TYPE | VARCHAR2 | (10) | Y | Cost type name |
| COST_TYPE_DESCRIPTION | VARCHAR2 | (240) | Description | |
| ALLOW_UPDATES_FLAG | NUMBER | Whether the costs defined for this cost type can be changed | ||
| FROZEN_STANDARD_FLAG | NUMBER | Whether it is frozen standard cost type or not | ||
| DEFAULT_COST_TYPE_ID | NUMBER | Y | Cost type identifier whose set of costs will be used as the default cost type during the cost roll up | |
| DEFAULT_COST_TYPE | VARCHAR2 | (10) | Y | Cost type name |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| INVENTORY_ASSET | NUMBER | Y | Flag indicating whether the item is asset or expense | |
| LOT_SIZE | NUMBER | Lot Size | ||
| BASED_ON_ROLLUP | NUMBER | Flag indicating whether cost will be rolled up | ||
| SHRINKAGE_RATE | NUMBER | Manufacturing shrinkage rate (for make item only) | ||
| DEFAULTED_FLAG | NUMBER | Y | Flag indicating whether the cost of the item is defaulted from the default cost type during cost roll up | |
| ITEM_COST | NUMBER | Item unit cost | ||
| MATERIAL_COST | NUMBER | Material cost | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material overhead cost | ||
| RESOURCE_COST | NUMBER | Resource cost | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside Processing cost | ||
| OVERHEAD_COST | NUMBER | Overhead cost | ||
| PLANNING_MAKE_BUY_CODE | VARCHAR2 | (80) | ||
| DEFAULT_INCLUDE_IN_ROLLUP_FLAG | VARCHAR2 | (1) | ||
| COST_OF_SALES_ACCOUNT | NUMBER | |||
| SALES_ACCOUNT | NUMBER | |||
| CATEGORY_ID | NUMBER | Category identifier | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who column | ||
| PROGRAM_ID | NUMBER | Concurrent who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent who column |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| CATEGORY_SET_ID | NUMBER | Category set identifier | ||
| CATEGORY_ID | NUMBER | Category identifier | ||
| RESOURCE_ID | NUMBER | Resource unique identifier | ||
| MATERIAL_OVERHEAD_CODE | VARCHAR2 | (10) | Resource code | |
| ITEM_TYPE | NUMBER | Type of item that the material overhead applies | ||
| ITEM_TYPE_NAME | VARCHAR2 | (80) | ||
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ACTIVITY | VARCHAR2 | (10) | Activity name | |
| ACTIVITY_ID | NUMBER | Activity identifier | ||
| BASIS_TYPE_NAME | VARCHAR2 | (80) | ||
| BASIS_TYPE | NUMBER | Basis | ||
| ITEM_UNITS | NUMBER | Number of item units the activity cost is applied to | ||
| ACTIVITY_UNITS | NUMBER | Number of activity units applied to the item cost | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | Y | Number of resource units, overhead rate, or activity unit cost per basis | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ACTIVITY_CONTEXT | VARCHAR2 | (30) | Structure defining column for the Activity Unit Information | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who column | ||
| PROGRAM_ID | NUMBER | Concurrent who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent who column |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_TABLE | CHAR | (5) | ||
| ORGANIZATION_ID | NUMBER | |||
| LAYER_ID | NUMBER | |||
| INV_LAYER_ID | NUMBER | |||
| TRANSACTION_ID | NUMBER | |||
| COST_ELEMENT_ID | NUMBER | |||
| LEVEL_TYPE | NUMBER | |||
| ACTUAL_COST | NUMBER |
APPS.CST_LAYER_ACTUAL_COSTS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | |||
| LAYER_ID | NUMBER | |||
| INV_LAYER_ID | NUMBER | |||
| LAYER_QUANTITY | NUMBER | |||
| TRANSACTION_SOURCE_TYPE_NAME | VARCHAR2 | (30) | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | |||
| MATERIAL_COST | NUMBER | |||
| MATERIAL_OVERHEAD_COST | NUMBER | |||
| RESOURCE_COST | NUMBER | |||
| OUTSIDE_PROCESSING_COST | NUMBER | |||
| OVERHEAD_COST | NUMBER | |||
| TOTAL_UNIT_COST | NUMBER | |||
| TRANSACTION_SOURCE_ID | NUMBER | |||
| TRANSACTION_SOURCE_NAME | VARCHAR2 | (240) |
APPS.CST_LAYER_ACTUAL_COST_DTLS_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row Identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| LAYER_ID | NUMBER | Y | Layer identifier | |
| LEVEL_TYPE | NUMBER | Y | Level identifier | |
| LEVEL_TYPE_DSP | VARCHAR2 | (80) | Lookup meaning | |
| ITEM_COST | NUMBER | Sum of Item Cost | ||
| COST_ELEMENT | VARCHAR2 | (50) | Y | Cost element name |
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier |
APPS.CST_LAYER_COST_DETAILS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row Id | |
| TRANSACTION_ID | NUMBER | Landed cost adjustment transaction id | ||
| RCV_TRANSACTION_ID | NUMBER | Y | Parent receipt transaction for LCM shipment | |
| ORGANIZATION_ID | NUMBER | Y | Destination inventory organization id | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item id | |
| TRANSACTION_DATE | DATE | Y | Landed cost adjustment transaction date | |
| PRIOR_LANDED_COST | NUMBER | Y | Prior landed cost | |
| NEW_LANDED_COST | NUMBER | Y | New landed cost | |
| PROCESS_STATUS | NUMBER | Y | Process status: 1-Pending, 2-Validated, 3-Errored | |
| PROCESS_PHASE | NUMBER | Y | Process phase: 1-Pending, 2-Processing | |
| GROUP_ID | NUMBER | Landed cost adjustment processor group id | ||
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column | ||
| PROCESS_PHASE_MEANING | VARCHAR2 | (80) | Y | Process status: 1-Pending, 2-Validated, 3-Errored |
| PROCESS_STATUS_MEANING | VARCHAR2 | (80) | Y | Process status: 1-Pending, 2-Validated, 3-Errored |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization Code | |
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | Organization Name |
| PO_HEADER_ID | NUMBER | Purchase order identifier | ||
| PO_NUMBER | VARCHAR2 | (20) | Y | Purchase order number |
| PO_LINE_ID | NUMBER | Purchase order line identifier | ||
| PO_LINE_NUM | NUMBER | Y | Purchase order line number | |
| RECEIPT_NUM | VARCHAR2 | (30) | Receipt number | |
| LINE_LOCATION_ID | NUMBER | Purchase order shipment identifier | ||
| ITEM_DESCRIPTION | VARCHAR2 | (240) | Item description | |
| RECEIPT_LINE_NUM | NUMBER | Y | Shipment line number | |
| SHIPMENT_HEADER_ID | NUMBER | Y | Receipt header unique identifier | |
| SHIPMENT_LINE_ID | NUMBER | Y | Shipment line unique identifier |
APPS.CST_LC_ADJ_INTERFACE_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY | NUMBER | (15) | Y | The organization_id of the legal entity |
| COST_TYPE_ID | NUMBER | Y | The id of the cost type that will be associated with the legal entity. | |
| SET_OF_BOOKS_ID | NUMBER | (15) | Y | the id of the set of books that will be assigned to the |
| PRIMARY_COST_METHOD | NUMBER | Y | the id of the cost method (from MFG_LOOKUPS) that will be used for | |
| PAC_RATES_COST_TYPE_ID | NUMBER | Y | the id of the cost_type that will serve as the rates | |
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| REQUEST_ID | NUMBER | Extended Who Column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Extended Who Column | ||
| PROGRAM_ID | NUMBER | Extended Who Column | ||
| PROGRAM_UPDATE_DATE | DATE | Extended Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| CREATE_ACCT_ENTRIES | VARCHAR2 | (1) | Option that allows the user to create accounting entries for periodic costing | |
| ACCOUNTING_LIBRARY_ID | NUMBER | ID of the accounting library that is to be used to create accounting distributions for the Legal Entity and Cost Type combination | ||
| POST_TO_GL | VARCHAR2 | (1) | Option that allows the user to post accounting entries to GL | |
| GL_TRANSFER_ALLOW_OVERRIDE | VARCHAR2 | (1) | Option that allows the user to change the default values for program parameters when transfer to GL process is submitted | |
| GL_TRANSFER_MODE | VARCHAR2 | (1) | GL Interface Transfer Summary Level | |
| GL_TRANSFER_SUBMIT_JOURNAL_IMP | VARCHAR2 | (1) | Option for submitting Journal Import to Oracle GL, at the same time as the transfer to GL process | |
| LEGAL_ENTITY_NAME | VARCHAR2 | (240) | Y | The name corresponding to the legal entity |
| COST_TYPE | VARCHAR2 | (10) | Y | Name of the cost type corresponding to the cost_type_ID |
| COST_TYPE_DESC | VARCHAR2 | (240) | Description of the Cost Type | |
| SET_OF_BOOKS_NAME | VARCHAR2 | (20) | Y | The name of the set of books corresponding to the set of books ID |
| PRIMARY_COST_METHOD_NAME | VARCHAR2 | (80) | Y | Name corresponding to the Primary Cost Method Identifier |
| PAC_RATES_COST_TYPE | VARCHAR2 | (10) | Y | Name corresponding to the PAC rates cost type ID |
| PAC_RATES_COST_TYPE_DESC | VARCHAR2 | (240) | Description of the PAC rates cost type | |
| ACCOUNTING_LIBRARY_NAME | VARCHAR2 | (15) | NAme corresponding to the Accounting library ID |
APPS.CST_LE_COST_TYPES_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | ||
| RULE_ID | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| TRANSACTION_TYPE | NUMBER | Y | ||
| SELECTION_CRITERIA | NUMBER | |||
| CATEGORY_ID | NUMBER | |||
| ITEM_FROM | NUMBER | |||
| ITEM_TO | NUMBER | |||
| ITEM_TYPE | NUMBER | Y | ||
| SHIP_FROM_ORG | NUMBER | |||
| EARN_MOH | NUMBER | Y | ||
| COST_TYPE_ID | NUMBER | |||
| TRANSACTION_TYPE_NAME | VARCHAR2 | (80) | Y | |
| COST_TYPE | VARCHAR2 | (10) | ||
| ITEM_TYPE_NAME | VARCHAR2 | (80) | Y |
APPS.CST_MATERIAL_OVHD_RULES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Row Identifier | |
| COST_LAYER_ID | NUMBER | Y | Cost Layer Identifier | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Last Update Date | ||
| LEGAL_ENTITY_ID | NUMBER | (15) | Y | Legal Entity Identifier |
| PAC_PERIOD_ID | NUMBER | Y | Period Identifier | |
| COST_GROUP_ID | NUMBER | Y | Cost Group Identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost Type Identifier | |
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory Item Identifier | |
| INVENTORY_ITEM_DESCRIPTION | VARCHAR2 | (240) | Inventory Item Description | |
| UOM_CODE | VARCHAR2 | (3) | Unit Of Measure Code | |
| ITEM_COST | NUMBER | The calculated cost of an inventory item at the end of a particular period. Used in both Incremental LIFO and PAC | ||
| MARKET_VALUE | NUMBER | If the user enters a market value, that market value will be used in preference to " item cost" in inventory calculations. Incremental LIFO cost method specific. | ||
| JUSTIFICATION | VARCHAR2 | (2000) | If the user enters a market value then the are required to justify that entry. Incremental LIFO cost method specific. | |
| REQUEST_ID | NUMBER | Request ID | ||
| PROGRAM_APPLICATION_ID | NUMBER | Program application identifier | ||
| PROGRAM_ID | NUMBER | Program identifier | ||
| PROGRAM_UPDATE_DATE | DATE | Program Update Date | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield Segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield Segment |
APPS.CST_MGD_LIFO_ITEM_COSTS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PAC_PERIOD_ID | NUMBER | Y | Periodic Actual Costing Period Identifier. This identifier is used for LIFO periods as well | |
| PERIOD_NAME | VARCHAR2 | (15) | Y | Period Name. If periods are in annual increments the period names might be 1995, 1996, 1997 ETC or if the periods are in monthly increments the names might be Jan, Feb, Mar ETC |
| PERIOD_OPEN_FLAG | VARCHAR2 | (1) | Y | Records if the period is open or not |
| PERIOD_STATUS | VARCHAR2 | (80) | Y | Records the status of a period. Needed along with open flag because there are more than two statuses. |
| PERIOD_START_DATE | DATE | Y | Period Start Date | |
| PERIOD_END_DATE | DATE | Y | Period End Date | |
| PERIOD_YEAR | NUMBER | Y | Period Year. Depending on the period increment this might be day, month, year etc | |
| PERIOD_NUM | NUMBER | Y | Period Number | |
| COST_TYPE_ID | NUMBER | Y | Cost Type Identifier | |
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | Cost Type Name |
| COST_TYPE_DESCRIPTION | VARCHAR2 | (240) | Cost Type Description | |
| LEGAL_ENTITY_ID | NUMBER | (15) | Y | Legal Entity Identifier |
| LEGAL_ENTITY_NAME | VARCHAR2 | (240) | Y | Legal Entity Name |
| COST_GROUP_ID | NUMBER | Y | Cost Group Identifier | |
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | Cost Group Name |
| COST_GROUP_DESCRIPTION | VARCHAR2 | (240) | Cost Group Description | |
| MASTER_ORGANIZATION_ID | NUMBER | Master Organization Identifier |
APPS.CST_MGD_LIFO_PERIODS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | ||
| LEGAL_ENTITY_ID | NUMBER | (15) | ||
| LEGAL_ENTITY_NAME | VARCHAR2 | (240) | ||
| COST_GROUP_ID | NUMBER | |||
| COST_GROUP_NAME | VARCHAR2 | (10) | ||
| MASTER_ORG_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | |||
| OPERATING_UNIT_ID | NUMBER | Operating Unit ID | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | ||
| ORG_CODE | VARCHAR2 | (3) | ||
| SET_OF_BOOKS_ID | NUMBER | (15) | ||
| TRANSFER_ORGANIZATION_ID | NUMBER | |||
| TRANSFER_ORGANIZATION_NAME | VARCHAR2 | (240) | ||
| TRANSFER_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| TRANSFER_SUBINVENTORY | VARCHAR2 | (10) | ||
| TRANSFER_LOCATOR_ID | NUMBER | |||
| TRANSFER_LOCATOR_NAME | VARCHAR2 | (1) | Transfer Locator Name | |
| SHIPMENT_NUMBER | VARCHAR2 | (30) | ||
| TRANSFER_TRANSACTION_ID | NUMBER | |||
| TRANSACTION_ID | NUMBER | |||
| TRANSACTION_DATE | DATE | |||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | |||
| TRANSACTION_SOURCE_TYPE_NAME | VARCHAR2 | (30) | ||
| TRANSACTION_SOURCE_ID | NUMBER | |||
| TRANSACTION_SOURCE_NAME_DB | VARCHAR2 | (240) | ||
| TRANSACTION_QUANTITY | NUMBER | |||
| TRANSACTION_UOM | VARCHAR2 | (3) | ||
| PRIMARY_QUANTITY | NUMBER | |||
| PRIMARY_UOM_CODE | VARCHAR2 | (25) | ||
| TRANSACTION_ACTION_ID | NUMBER | |||
| TRANSACTION_ACTION | VARCHAR2 | (80) | Locator Name | |
| TRANSACTION_TYPE_ID | NUMBER | |||
| TRANSACTION_TYPE_NAME | VARCHAR2 | (240) | ||
| PO_HEADER_ID | NUMBER | |||
| PO_HEADER_NUM | VARCHAR2 | (20) | ||
| PO_LINE_ID | NUMBER | |||
| PO_LINE_NUM | NUMBER | |||
| REQUISITION_ID | NUMBER | |||
| REQUISITION_NUM | VARCHAR2 | (20) | ||
| REQUISITION_LINE_ID | NUMBER | |||
| REQUISITION_LINE_NUM | NUMBER | |||
| PO_VENDOR_ID | NUMBER | |||
| PO_VENDOR_NAME | VARCHAR2 | (240) | ||
| PO_VENDOR_SITE_ID | NUMBER | |||
| PO_VENDOR_SITE_NAME | VARCHAR2 | (15) | ||
| RECEIPT_NUM | VARCHAR2 | (30) | ||
| REC_SHIPMENT_NUMBER | VARCHAR2 | (30) | ||
| RECEIVING_LOCATION_ID | NUMBER | |||
| INVENTORY_ITEM_ID | NUMBER | |||
| ITEM_DESCRIPTION | VARCHAR2 | (240) | ||
| REVISION | VARCHAR2 | (3) | ||
| WAYBILL_AIRBILL | VARCHAR2 | (20) | ||
| FREIGHT_CODE | VARCHAR2 | (30) | ||
| NUMBER_OF_CONTAINERS | NUMBER | |||
| SUBINVENTORY | VARCHAR2 | (10) | ||
| LOCATOR_ID | NUMBER | |||
| LOCATOR_NAME | VARCHAR2 | (1) | ||
| REASON_NAME | VARCHAR2 | (30) | ||
| TRANSACTION_REFERENCE | VARCHAR2 | (240) | ||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | |||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | |||
| LAST_UPDATE_LOGIN | NUMBER | |||
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE | |||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ATTRIBUTE15 | VARCHAR2 | (150) | ||
| SOURCE_TABLE | CHAR | (3) |
APPS.CST_MTL_RCV_TXN_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number in a routing | ||
| OPERATION_SEQUENCE_ID | NUMBER | Operation sequence identifier | ||
| DEPARTMENT_ID | VARCHAR2 | (0) | Unused | |
| ACTIVITY_ID | VARCHAR2 | (0) | Unused | |
| RESOURCE_ID | VARCHAR2 | (0) | Unused | |
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | VARCHAR2 | (0) | Unused | |
| THIS_LEVEL_COSTS | NUMBER | This level costs | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Previous level costs | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (240) | Column 1 value for the Summary By Level template in View Item Cost Information | |
| COLUMN2_VALUE_2A | NUMBER | Column 2 value for the Summary By Level template in View Item Cost Information | ||
| COLUMN1_VALUE_2B | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2B | VARCHAR2 | (0) | Unused | |
| DESCRIPTION_COLUMN | VARCHAR2 | (0) | Unused | |
| GUI_COLUMN1 | VARCHAR2 | (0) | Unused | |
| GUI_COLUMN2 | NUMBER | Operation sequence number | ||
| GUI_DESCRIPTION | VARCHAR2 | (240) | Operation description |
APPS.CST_OPERATION_LEVEL_COST_VIEW is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
This view is used by Inventory Intellegence team for calculating transfer cost for FOB.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | This is Inventory transaction Identifier. | ||
| TRANSACTION_DATE | DATE | Inventory transaction date. | ||
| ORGANIZATION_ID | NUMBER | Inventory Organization ID. | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | Sub Inventory code. | |
| INVENTORY_ITEM_ID | NUMBER | Inventory Item Identifier. | ||
| LOCATOR_ID | NUMBER | Inventory Locator Identifier. | ||
| TRANSACTION_TYPE_ID | NUMBER | Type of the Inventory Transaction. | ||
| TRANSACTION_ACTION_ID | NUMBER | Inventory Transaction Action type. | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Source type Identifier for Inventory transaction. | ||
| TRANSACTION_SOURCE_ID | NUMBER | Source Identifier for Inventory transaction. | ||
| TRANSACTION_SOURCE_NAME | VARCHAR2 | (80) | Source name for Inventory transaction. | |
| REASON_ID | NUMBER | Reason for the transaction. | ||
| TRANSFER_ORGANIZATION_ID | NUMBER | To Organization Id for material transfer. | ||
| TRANSFER_SUBINVENTORY | VARCHAR2 | (10) | To Sub Inventory for the material transfer. | |
| TRANSFER_LOCATOR_ID | NUMBER | To Locator Identifier for the material transfer. | ||
| FOB_POINT | NUMBER | freight of Board for the material transfer b/w two Organizations. | ||
| PRIMARY_QUANTITY | NUMBER | The quantity that is transfered. | ||
| TRANSFER_COST | NUMBER | Total Cost for the material that is transfered. | ||
| ACTUAL_COST | NUMBER | Actual Cost for the material that is transfered. |
APPS.CST_OPI_MMT_MTA_V is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
CST_ORGANIZATION_DEFINITIONS is a view that resolves certain
basic information including the organization names,
three-letter codes, charts of accounts, and sets of books by joining
MTL_PARAMETERS and HR_ORGANIZATIONS for inventory organizations.
More information regarding an inventory organization may be directly
obtained from MTL_PARAMETERS.
An organization is an inventory organization if:
- it has a classification of "Inventory Organization"
- it has a set of books defined
- it has inventory parameters defined
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | (15) | Y | Organization identifier |
| BUSINESS_GROUP_ID | NUMBER | (15) | Y | Identifier of business group of organization |
| USER_DEFINITION_ENABLE_DATE | DATE | Y | Date on which this organization becomes enabled | |
| DISABLE_DATE | DATE | Date on which this organization no longer is enabled | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Abbreviation for this organization | |
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | Name of this organization |
| SET_OF_BOOKS_ID | NUMBER | (15) | Y | Identifier of the set of books that this organization uses |
| CHART_OF_ACCOUNTS_ID | NUMBER | (15) | Y | Identifier of the chart of accounts of the set of books of this organization |
| CURRENCY_CODE | VARCHAR2 | (15) | Y | Currency code |
| OPERATING_UNIT | NUMBER | Operating unit identifier | ||
| LEGAL_ENTITY | NUMBER | Legal entity identifier |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY | NUMBER | (15) | Y | |
| COST_GROUP_ID | NUMBER | Y | ||
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| COST_TYPE_ID | NUMBER | Y | ||
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| MASTER_ORGANIZATION_ID | NUMBER | |||
| PRIMARY_COST_METHOD | NUMBER | Y | ||
| APPLICATION_ID | NUMBER | |||
| SET_OF_BOOKS_ID | NUMBER | (15) | Y | |
| INVENTORY_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| INVENTORY_ORGANIZATION_ID | NUMBER | Y | ||
| TRX_CLASS_NAME | VARCHAR2 | (80) | Y | |
| TRX_CLASS | CHAR | (7) | ||
| TRX_TYPE_NAME | VARCHAR2 | (80) | Y | |
| TRX_TYPE_N | NUMBER | Y | ||
| TRX_NUMBER_DISPLAYED | VARCHAR2 | (40) | ||
| TRX_NUMBER_N | NUMBER | |||
| TRX_DATE | DATE | Y | ||
| COMMENTS | VARCHAR2 | (240) | ||
| TRX_HDR_TABLE | CHAR | (3) | ||
| TRX_HDR_ID | NUMBER | |||
| ACCT_LINE_TYPE_NAME | VARCHAR2 | (80) | Y | |
| ACCT_LINE_TYPE | VARCHAR2 | (30) | ||
| CODE_COMBINATION_ID | NUMBER | (15) | ||
| CURRENCY_CODE | VARCHAR2 | (15) | Y | |
| ENTERED_DR | NUMBER | |||
| ENTERED_CR | NUMBER | |||
| ACCOUNTED_DR | NUMBER | |||
| ACCOUNTED_CR | NUMBER | |||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_USER_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| ACCOUNTING_DATE | DATE | Y | ||
| GL_TRANSFER_STATUS_NAME | VARCHAR2 | (80) | Y | |
| GL_TRANSFER_STATUS | VARCHAR2 | (1) | ||
| GL_BATCH_ID | NUMBER | |||
| SOURCE_TABLE | CHAR | (3) | ||
| SOURCE_ID | NUMBER | |||
| AEL_TABLE | CHAR | (3) | ||
| AE_LINE_REFERENCE | VARCHAR2 | (132) | ||
| AE_LINE_REFERENCE_INTERNAL | VARCHAR2 | (132) | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| INVENTORY_ITEM_REVISION | VARCHAR2 | (3) | ||
| TRX_UOM | VARCHAR2 | (3) | Y | |
| TRX_QUANTITY | NUMBER | Y | ||
| UNIT_COST | VARCHAR2 | (40) | ||
| SUBINVENTORY | VARCHAR2 | (10) | ||
| INVENTORY_ITEM_LOCATOR_ID | NUMBER | |||
| INVENTORY_ITEM_LOCATOR_NAME | VARCHAR2 | (50) | ||
| MFG_OPERATION_SEQ_NUM | NUMBER | |||
| TRX_SOURCE_TYPE_NAME | VARCHAR2 | (30) | Y | |
| TRX_SOURCE_TYPE_ID | NUMBER | Y | ||
| TRX_SOURCE_NAME | VARCHAR2 | (80) | ||
| TRX_SOURCE_ID | NUMBER | |||
| TRX_REASON_NAME | VARCHAR2 | (30) | ||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | ||
| COST_ELEMENT_ID | NUMBER | |||
| JE_HEADER_ID | NUMBER | (15) | Y | |
| JE_LINE_NUM | NUMBER | (15) | Y | |
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | (15) | Y | |
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | (15) | Y | |
| LAST_UPDATE_LOGIN | NUMBER | (15) | Y | |
| REQUEST_ID | NUMBER | (15) | ||
| PROGRAM_APPLICATION_ID | NUMBER | (15) | ||
| PROGRAM_ID | NUMBER | (15) | ||
| PROGRAM_UPDATE_DATE | DATE |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY | NUMBER | (15) | ||
| COST_GROUP_ID | NUMBER | |||
| COST_GROUP_NAME | VARCHAR2 | (10) | ||
| COST_TYPE_ID | NUMBER | |||
| COST_TYPE_NAME | VARCHAR2 | (10) | ||
| MASTER_ORGANIZATION_ID | NUMBER | |||
| PRIMARY_COST_METHOD | NUMBER | |||
| JE_CATEGORY | VARCHAR2 | (30) | ||
| USER_JE_CATEGORY_NAME | VARCHAR2 | (25) | ||
| APPLICATION_ID | NUMBER | |||
| SET_OF_BOOKS_ID | NUMBER | (15) | ||
| ORG_ID | NUMBER | |||
| INVENTORY_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| INVENTORY_ORGANIZATION_ID | NUMBER | |||
| TRX_CLASS_NAME | VARCHAR2 | (80) | ||
| TRX_CLASS | CHAR | (7) | ||
| TRX_TYPE_NAME | VARCHAR2 | (240) | ||
| TRX_TYPE_C | VARCHAR2 | (30) | ||
| TRX_DATE | DATE | |||
| COMMENTS | VARCHAR2 | (240) | ||
| TRX_HDR_TABLE | CHAR | (3) | ||
| TRX_HDR_ID | NUMBER | |||
| CODE_COMBINATION_ID | NUMBER | (15) | ||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| ENTERED_DR | NUMBER | |||
| ENTERED_CR | NUMBER | |||
| ACCOUNTED_DR | NUMBER | |||
| ACCOUNTED_CR | NUMBER | |||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_USER_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| THIRD_PARTY_TYPE | CHAR | (1) | ||
| THIRD_PARTY_ID | NUMBER | |||
| THIRD_PARTY_NUMBER | VARCHAR2 | (30) | ||
| THIRD_PARTY_NAME | VARCHAR2 | (240) | ||
| THIRD_PARTY_SUB_ID | NUMBER | |||
| THIRD_PARTY_SUB_NAME | VARCHAR2 | (15) | ||
| ACCOUNTING_DATE | DATE | |||
| GL_TRANSFER_STATUS_NAME | VARCHAR2 | (80) | ||
| GL_TRANSFER_STATUS | CHAR | (1) | ||
| SOURCE_TABLE | CHAR | (3) | ||
| SOURCE_ID | NUMBER | |||
| AEL_TABLE | CHAR | (3) | ||
| AE_LINE_REFERENCE | VARCHAR2 | (80) | ||
| AE_LINE_REFERENCE_INTERNAL | VARCHAR2 | (80) | ||
| RCV_RECEIPT_NUM | VARCHAR2 | (30) | ||
| RCV_SHIPMENT_HEADER_ID | NUMBER | |||
| PO_ORDER_NUMBER | VARCHAR2 | (20) | ||
| PO_ORDER_TYPE | VARCHAR2 | (80) | ||
| PO_LINE_NUM | NUMBER | |||
| INVENTORY_ITEM_ID | NUMBER | |||
| INVENTORY_ITEM_REVISION | VARCHAR2 | (3) | ||
| ITEM_DESCRIPTION | VARCHAR2 | (240) | ||
| TRX_UOM | VARCHAR2 | (25) | ||
| TRX_QUANTITY | NUMBER | |||
| UNIT_PRICE | NUMBER | |||
| PO_ORDER_RELEASE_NUM | NUMBER | |||
| SUBINVENTORY | VARCHAR2 | (10) | ||
| JE_HEADER_ID | NUMBER | (15) | ||
| JE_LINE_NUM | NUMBER | (15) | ||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | (15) | ||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | (15) | ||
| LAST_UPDATE_LOGIN | NUMBER | (15) | ||
| REQUEST_ID | NUMBER | (15) | ||
| PROGRAM_APPLICATION_ID | NUMBER | (15) | ||
| PROGRAM_ID | NUMBER | (15) | ||
| PROGRAM_UPDATE_DATE | DATE | |||
| PO_ORDER_SHIPMENT_NUM | NUMBER | |||
| PO_ORDER_DISTRIBUTION_NUM | NUMBER |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY | NUMBER | (15) | ||
| COST_GROUP_ID | NUMBER | |||
| COST_GROUP_NAME | VARCHAR2 | (10) | ||
| COST_TYPE_ID | NUMBER | |||
| COST_TYPE_NAME | VARCHAR2 | (10) | ||
| PRIMARY_COST_METHOD | NUMBER | |||
| MASTER_ITEM_ORG_ID | NUMBER | |||
| APPLICATION_ID | NUMBER | |||
| SET_OF_BOOKS_ID | NUMBER | (15) | ||
| INVENTORY_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| INVENTORY_ORGANIZATION_ID | NUMBER | |||
| TRX_CLASS_NAME | VARCHAR2 | (80) | ||
| TRX_CLASS | CHAR | (7) | ||
| TRX_TYPE_NAME | VARCHAR2 | (80) | ||
| TRX_TYPE_N | NUMBER | |||
| TRX_NUMBER_DISPLAYED | VARCHAR2 | (40) | ||
| TRX_NUMBER_N | NUMBER | |||
| TRX_DATE | DATE | |||
| COMMENTS | VARCHAR2 | (240) | ||
| TRX_HDR_TABLE | VARCHAR2 | (10) | ||
| TRX_HDR_ID | NUMBER | |||
| ACCT_LINE_TYPE_NAME | VARCHAR2 | (80) | ||
| ACCT_LINE_TYPE | VARCHAR2 | (30) | ||
| CODE_COMBINATION_ID | NUMBER | (15) | ||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| ENTERED_DR | NUMBER | |||
| ENTERED_CR | NUMBER | |||
| ACCOUNTED_DR | NUMBER | |||
| ACCOUNTED_CR | NUMBER | |||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_USER_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| ACCOUNTING_DATE | DATE | |||
| GL_TRANSFER_STATUS_NAME | VARCHAR2 | (80) | ||
| GL_TRANSFER_STATUS | VARCHAR2 | (1) | ||
| GL_BATCH_ID | NUMBER | |||
| SOURCE_TABLE | VARCHAR2 | (30) | ||
| SOURCE_ID | NUMBER | (15) | ||
| AEL_TABLE | CHAR | (3) | ||
| AE_LINE_REFERENCE | VARCHAR2 | (240) | ||
| AE_LINE_REFERENCE_INTERNAL | VARCHAR2 | (132) | ||
| TRX_UOM | VARCHAR2 | (3) | ||
| TRX_QUANTITY | NUMBER | |||
| UNIT_COST | VARCHAR2 | (40) | ||
| MFG_OPERATION_SEQ_NUM | NUMBER | |||
| BOM_DEPARTMENT_CODE | VARCHAR2 | (10) | ||
| BOM_DEPARTMENT_NAME | VARCHAR2 | (240) | ||
| WIP_RESOURCE_SEQ_NUM | NUMBER | |||
| TRX_SOURCE_NAME | VARCHAR2 | (20) | ||
| WIP_JOB_ID | NUMBER | |||
| WIP_JOB_NAME | VARCHAR2 | (240) | ||
| WIP_LINE_ID | NUMBER | |||
| WIP_LINE_CODE | VARCHAR2 | (10) | ||
| WIP_ASSEMBLY | VARCHAR2 | (40) | ||
| WIP_BASIS | VARCHAR2 | (80) | ||
| WIP_RESOURCE_ID | NUMBER | |||
| WIP_RESOURCE_NAME | VARCHAR2 | (10) | ||
| WIP_FLOW_SCHEDULE_NUMBER | VARCHAR2 | (30) | ||
| TRX_REASON_NAME | VARCHAR2 | (30) | ||
| COST_ELEMENT_ID | NUMBER | |||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | ||
| JE_HEADER_ID | NUMBER | (15) | ||
| JE_LINE_NUM | NUMBER | (15) | ||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | (15) | ||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | (15) | ||
| LAST_UPDATE_LOGIN | NUMBER | (15) | ||
| REQUEST_ID | NUMBER | (15) | ||
| PROGRAM_APPLICATION_ID | NUMBER | (15) | ||
| PROGRAM_ID | NUMBER | (15) | ||
| PROGRAM_UPDATE_DATE | DATE |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY | NUMBER | (15) | ||
| COST_GROUP_ID | NUMBER | |||
| COST_GROUP_NAME | VARCHAR2 | (10) | ||
| COST_TYPE_ID | NUMBER | |||
| COST_TYPE_NAME | VARCHAR2 | (10) | ||
| MASTER_ORGANIZATION_ID | NUMBER | |||
| PRIMARY_COST_METHOD | NUMBER | |||
| APPLICATION_ID | NUMBER | |||
| SET_OF_BOOKS_ID | NUMBER | (15) | ||
| INVENTORY_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| INVENTORY_ORGANIZATION_ID | NUMBER | |||
| TRX_CLASS_NAME | VARCHAR2 | (80) | ||
| TRX_CLASS | CHAR | (7) | ||
| TRX_TYPE_NAME | VARCHAR2 | (80) | ||
| TRX_TYPE_N | NUMBER | |||
| TRX_NUMBER_DISPLAYED | VARCHAR2 | (40) | ||
| TRX_NUMBER_N | NUMBER | |||
| TRX_DATE | DATE | |||
| COMMENTS | VARCHAR2 | (240) | ||
| TRX_HDR_TABLE | CHAR | (3) | ||
| TRX_HDR_ID | NUMBER | |||
| ACCT_LINE_TYPE_NAME | VARCHAR2 | (80) | ||
| ACCT_LINE_TYPE | VARCHAR2 | (30) | ||
| CODE_COMBINATION_ID | NUMBER | (15) | ||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| ENTERED_DR | NUMBER | |||
| ENTERED_CR | NUMBER | |||
| ACCOUNTED_DR | NUMBER | |||
| ACCOUNTED_CR | NUMBER | |||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_USER_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| ACCOUNTING_DATE | DATE | |||
| GL_TRANSFER_STATUS_NAME | VARCHAR2 | (80) | ||
| GL_TRANSFER_STATUS | VARCHAR2 | (1) | ||
| GL_BATCH_ID | NUMBER | |||
| SOURCE_TABLE | CHAR | (3) | ||
| SOURCE_ID | NUMBER | |||
| AEL_TABLE | CHAR | (3) | ||
| AE_LINE_REFERENCE | VARCHAR2 | (132) | ||
| AE_LINE_REFERENCE_INTERNAL | VARCHAR2 | (132) | ||
| INVENTORY_ITEM_ID | NUMBER | |||
| INVENTORY_ITEM_REVISION | VARCHAR2 | (3) | ||
| TRX_UOM | VARCHAR2 | (3) | ||
| TRX_QUANTITY | NUMBER | |||
| UNIT_COST | VARCHAR2 | (40) | ||
| SUBINVENTORY | VARCHAR2 | (10) | ||
| INVENTORY_ITEM_LOCATOR_ID | NUMBER | |||
| INVENTORY_ITEM_LOCATOR_NAME | VARCHAR2 | (50) | ||
| MFG_OPERATION_SEQ_NUM | NUMBER | |||
| TRX_SOURCE_TYPE_NAME | VARCHAR2 | (30) | ||
| TRX_SOURCE_TYPE_ID | NUMBER | |||
| TRX_SOURCE_NAME | VARCHAR2 | (80) | ||
| TRX_SOURCE_ID | NUMBER | |||
| TRX_REASON_NAME | VARCHAR2 | (30) | ||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | ||
| COST_ELEMENT_ID | NUMBER | |||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | (15) | ||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | (15) | ||
| LAST_UPDATE_LOGIN | NUMBER | (15) | ||
| REQUEST_ID | NUMBER | (15) | ||
| PROGRAM_APPLICATION_ID | NUMBER | (15) | ||
| PROGRAM_ID | NUMBER | (15) | ||
| PROGRAM_UPDATE_DATE | DATE |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY | NUMBER | (15) | ||
| COST_GROUP_ID | NUMBER | |||
| COST_GROUP_NAME | VARCHAR2 | (10) | ||
| COST_TYPE_ID | NUMBER | |||
| COST_TYPE_NAME | VARCHAR2 | (10) | ||
| MASTER_ORGANIZATION_ID | NUMBER | |||
| PRIMARY_COST_METHOD | NUMBER | |||
| JE_CATEGORY | VARCHAR2 | (30) | ||
| USER_JE_CATEGORY_NAME | VARCHAR2 | (25) | ||
| APPLICATION_ID | NUMBER | |||
| SET_OF_BOOKS_ID | NUMBER | (15) | ||
| ORG_ID | NUMBER | |||
| INVENTORY_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| INVENTORY_ORGANIZATION_ID | NUMBER | |||
| TRX_CLASS_NAME | VARCHAR2 | (80) | ||
| TRX_CLASS | CHAR | (7) | ||
| TRX_TYPE_NAME | VARCHAR2 | (240) | ||
| TRX_TYPE_C | VARCHAR2 | (30) | ||
| TRX_DATE | DATE | |||
| COMMENTS | VARCHAR2 | (240) | ||
| TRX_HDR_TABLE | CHAR | (3) | ||
| TRX_HDR_ID | NUMBER | |||
| CODE_COMBINATION_ID | NUMBER | (15) | ||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| ENTERED_DR | NUMBER | |||
| ENTERED_CR | NUMBER | |||
| ACCOUNTED_DR | NUMBER | |||
| ACCOUNTED_CR | NUMBER | |||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_USER_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| THIRD_PARTY_TYPE | CHAR | (1) | ||
| THIRD_PARTY_ID | NUMBER | |||
| THIRD_PARTY_NUMBER | VARCHAR2 | (30) | ||
| THIRD_PARTY_NAME | VARCHAR2 | (240) | ||
| THIRD_PARTY_SUB_ID | NUMBER | |||
| THIRD_PARTY_SUB_NAME | VARCHAR2 | (15) | ||
| ACCOUNTING_DATE | DATE | |||
| GL_TRANSFER_STATUS_NAME | VARCHAR2 | (80) | ||
| GL_TRANSFER_STATUS | CHAR | (1) | ||
| SOURCE_TABLE | CHAR | (3) | ||
| SOURCE_ID | NUMBER | |||
| AEL_TABLE | CHAR | (3) | ||
| AE_LINE_REFERENCE | VARCHAR2 | (80) | ||
| AE_LINE_REFERENCE_INTERNAL | VARCHAR2 | (80) | ||
| RCV_RECEIPT_NUM | VARCHAR2 | (30) | ||
| RCV_SHIPMENT_HEADER_ID | NUMBER | |||
| PO_ORDER_NUMBER | VARCHAR2 | (20) | ||
| PO_ORDER_TYPE | VARCHAR2 | (80) | ||
| PO_LINE_NUM | NUMBER | |||
| INVENTORY_ITEM_ID | NUMBER | |||
| INVENTORY_ITEM_REVISION | VARCHAR2 | (3) | ||
| ITEM_DESCRIPTION | VARCHAR2 | (240) | ||
| TRX_UOM | VARCHAR2 | (25) | ||
| TRX_QUANTITY | NUMBER | |||
| UNIT_PRICE | NUMBER | |||
| PO_ORDER_RELEASE_NUM | NUMBER | |||
| SUBINVENTORY | VARCHAR2 | (10) | ||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | (15) | ||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | (15) | ||
| LAST_UPDATE_LOGIN | NUMBER | (15) | ||
| REQUEST_ID | NUMBER | (15) | ||
| PROGRAM_APPLICATION_ID | NUMBER | (15) | ||
| PROGRAM_ID | NUMBER | (15) | ||
| PROGRAM_UPDATE_DATE | DATE | |||
| PO_ORDER_SHIPMENT_NUM | NUMBER | |||
| PO_ORDER_DISTRIBUTION_NUM | NUMBER |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY | NUMBER | (15) | Y | |
| COST_GROUP_ID | NUMBER | Y | ||
| COST_GROUP_NAME | VARCHAR2 | (10) | Y | |
| COST_TYPE_ID | NUMBER | Y | ||
| COST_TYPE_NAME | VARCHAR2 | (10) | Y | |
| PRIMARY_COST_METHOD | NUMBER | Y | ||
| MASTER_ITEM_ORG_ID | NUMBER | |||
| APPLICATION_ID | NUMBER | |||
| SET_OF_BOOKS_ID | NUMBER | (15) | Y | |
| INVENTORY_ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| INVENTORY_ORGANIZATION_ID | NUMBER | Y | ||
| TRX_CLASS_NAME | VARCHAR2 | (80) | Y | |
| TRX_CLASS | CHAR | (7) | ||
| TRX_TYPE_NAME | VARCHAR2 | (80) | ||
| TRX_TYPE_N | NUMBER | Y | ||
| TRX_NUMBER_DISPLAYED | VARCHAR2 | (40) | ||
| TRX_NUMBER_N | NUMBER | Y | ||
| TRX_DATE | DATE | |||
| COMMENTS | VARCHAR2 | (240) | ||
| TRX_HDR_TABLE | VARCHAR2 | (10) | ||
| TRX_HDR_ID | NUMBER | Y | ||
| ACCT_LINE_TYPE_NAME | VARCHAR2 | (80) | Y | |
| ACCT_LINE_TYPE | VARCHAR2 | (30) | ||
| CODE_COMBINATION_ID | NUMBER | (15) | ||
| CURRENCY_CODE | VARCHAR2 | (15) | Y | |
| ENTERED_DR | NUMBER | |||
| ENTERED_CR | NUMBER | |||
| ACCOUNTED_DR | NUMBER | |||
| ACCOUNTED_CR | NUMBER | |||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (10) | ||
| CURRENCY_USER_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| ACCOUNTING_DATE | DATE | |||
| GL_TRANSFER_STATUS_NAME | VARCHAR2 | (80) | ||
| GL_TRANSFER_STATUS | VARCHAR2 | (1) | ||
| GL_BATCH_ID | NUMBER | |||
| SOURCE_TABLE | VARCHAR2 | (30) | ||
| SOURCE_ID | NUMBER | Y | ||
| AEL_TABLE | CHAR | (3) | ||
| AE_LINE_REFERENCE | VARCHAR2 | (240) | ||
| AE_LINE_REFERENCE_INTERNAL | VARCHAR2 | (132) | ||
| TRX_UOM | VARCHAR2 | (3) | ||
| TRX_QUANTITY | NUMBER | |||
| UNIT_COST | VARCHAR2 | (40) | ||
| MFG_OPERATION_SEQ_NUM | NUMBER | |||
| BOM_DEPARTMENT_CODE | VARCHAR2 | (10) | ||
| BOM_DEPARTMENT_NAME | VARCHAR2 | (240) | ||
| WIP_RESOURCE_SEQ_NUM | NUMBER | |||
| TRX_SOURCE_NAME | VARCHAR2 | (20) | ||
| WIP_JOB_ID | NUMBER | Y | ||
| WIP_JOB_NAME | VARCHAR2 | (240) | ||
| WIP_LINE_ID | NUMBER | |||
| WIP_LINE_CODE | VARCHAR2 | (10) | ||
| WIP_ASSEMBLY | VARCHAR2 | (40) | ||
| WIP_BASIS | VARCHAR2 | (80) | ||
| WIP_RESOURCE_ID | NUMBER | |||
| WIP_RESOURCE_NAME | VARCHAR2 | (10) | ||
| WIP_FLOW_SCHEDULE_NUMBER | VARCHAR2 | (30) | ||
| TRX_REASON_NAME | VARCHAR2 | (30) | ||
| COST_ELEMENT_ID | NUMBER | |||
| COST_ELEMENT_NAME | VARCHAR2 | (50) | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_LOGIN | NUMBER | |||
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_LAYER_ID | NUMBER | Y | ||
| PL_MATERIAL | NUMBER | |||
| PL_MATERIAL_OVERHEAD | NUMBER | |||
| PL_RESOURCE | NUMBER | |||
| PL_OUTSIDE_PROCESSING | NUMBER | |||
| PL_OVERHEAD | NUMBER | |||
| TL_MATERIAL | NUMBER | |||
| TL_MATERIAL_OVERHEAD | NUMBER | |||
| TL_RESOURCE | NUMBER | |||
| TL_OUTSIDE_PROCESSING | NUMBER | |||
| TL_OVERHEAD | NUMBER | |||
| MATERIAL_COST | NUMBER | |||
| MATERIAL_OVERHEAD_COST | NUMBER | |||
| RESOURCE_COST | NUMBER | |||
| OUTSIDE_PROCESSING_COST | NUMBER | |||
| OVERHEAD_COST | NUMBER | |||
| PL_ITEM_COST | NUMBER | |||
| TL_ITEM_COST | NUMBER | |||
| ITEM_COST | NUMBER | |||
| ITEM_BUY_COST | NUMBER | |||
| ITEM_MAKE_COST | NUMBER | |||
| UNBURDENED_COST | NUMBER | |||
| BURDEN_COST | NUMBER |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LEGAL_ENTITY | NUMBER | The organization id of the legal entity | ||
| NAME | VARCHAR2 | (240) | Y | The name of the corresponding legal entity. |
| SET_OF_BOOKS_ID | NUMBER | (15) | Y | The set of books associated with the legal entity. |
| DATE_FROM | DATE | The date from which the organization is valid. | ||
| DATE_TO | DATE | The date to which the organization is valid |
APPS.CST_PAC_LEGAL_ENTITIES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | ||
| REC_TYPE | VARCHAR2 | (10) | ||
| LEGAL_ENTITY | NUMBER | Legal Entity Identifier | ||
| COST_TYPE_ID | NUMBER | Cost Type Identifier | ||
| PAC_PERIOD_ID | NUMBER | System Generated Periodic Costing Period Identifier | ||
| PERIOD_TYPE | VARCHAR2 | (15) | Accounting Period Type | |
| PERIOD_SET_NAME | VARCHAR2 | (15) | Accounting Calendar Name | |
| STATUS_CODE | NUMBER | Period status code | ||
| STATUS | VARCHAR2 | (80) | Period Status | |
| PERIOD_NAME | VARCHAR2 | (15) | Accounting Period Name | |
| PERIOD_NUM | NUMBER | Accounting Period Number | ||
| PERIOD_YEAR | NUMBER | Accounting Period Year | ||
| START_DATE | DATE | Date on which accounting period starts | ||
| END_DATE | DATE | Date on which accounting period ends | ||
| CLOSE_DATE | DATE | |||
| LAST_UPDATE_DATE | DATE | Standard Who Column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who Column | ||
| CREATION_DATE | DATE | Standard Who Column | ||
| CREATED_BY | NUMBER | Standard Who Column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who Column |
APPS.CST_PAC_PERIODS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PAC_PERIOD_ID | NUMBER | Y | Periodic Costing Period Identifier | |
| COST_GROUP_ID | NUMBER | Y | Cost Group Identifier | |
| COST_GROUP | VARCHAR2 | (10) | Y | Cost Group Name |
| DISABLE_DATE | DATE | Cost Group Disable Date | ||
| FIRST_PHASE | NUMBER | Y | Acquisition Cost Processing Phase | |
| FIRST_PHASE_STATUS | NUMBER | Y | Status of Acquisition Cost Processing Phase | |
| FIRST_PHASE_STATUS_NAME | VARCHAR2 | (80) | Y | Status Description of Acquisition Cost Processing Phase |
| FIRST_PHASE_PROCESS_DATE | DATE | Acquisition Cost Processing Date | ||
| CURRENT_PHASE | NUMBER | Y | Cost Processing Phases | |
| CURRENT_PHASE_STATUS | NUMBER | Y | Status of Cost Processing Phases | |
| CURRENT_PHASE_STATUS_NAME | VARCHAR2 | (80) | Y | Status Description of Cost Processing Phases |
| CURRENT_PHASE_PROCESS_DATE | DATE | Cost Processing Date | ||
| DIST_PHASE | NUMBER | Y | ||
| DIST_PHASE_STATUS | NUMBER | Y | ||
| DIST_PHASE_STATUS_NAME | VARCHAR2 | (80) | Y | |
| DIST_PHASE_PROCESS_DATE | DATE | |||
| INTERORG_PHASE_STATUS | NUMBER | |||
| INTERORG_PHASE | NUMBER | |||
| INTERORG_PHASE_STATUS_NAME | VARCHAR2 | (80) | ||
| INTERORG_PHASE_PROCESS_DATE | DATE |
APPS.CST_PAC_PROCESS_PHASES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | Y | ||
| TRANSACTION_DATE | DATE | Y | ||
| TXN_ORGANIZATION_ID | NUMBER | |||
| LEGAL_ENTITY | NUMBER | |||
| COST_GROUP_ID | NUMBER | Y | ||
| MASTER_ORGANIZATION_ID | NUMBER | Y | ||
| MASTER_ORG_UOM | VARCHAR2 | (3) | ||
| ITEM_ID | NUMBER | |||
| ITEM_REVISION | VARCHAR2 | (3) | ||
| ITEM_DESCRIPTION | VARCHAR2 | (240) | ||
| TXN_UNIT_OF_MEASURE | VARCHAR2 | (25) | Y | |
| LOCATION_ID | NUMBER | |||
| TO_ORGANIZATION_ID | NUMBER | |||
| TO_ORG_PRIMARY_QUANTITY | NUMBER | |||
| TO_ORG_PRIMARY_UOM | VARCHAR2 | (25) | ||
| RECEIPT_DATE | DATE | |||
| RECEIPT_NUM | VARCHAR2 | (30) | ||
| SHIPMENT_NUM | VARCHAR2 | (30) | ||
| SHIPPED_DATE | DATE | |||
| FREIGHT_CARRIER_CODE | VARCHAR2 | (25) | ||
| QUANTITY_SHIPPED | NUMBER | |||
| DESTINATION_TYPE_CODE | VARCHAR2 | (25) | ||
| PACKING_SLIP | VARCHAR2 | (25) | ||
| SOURCE_DOCUMENT_CODE | VARCHAR2 | (25) | ||
| DELIVER_TO_LOCATION_ID | NUMBER | |||
| SOURCE_DOCUMENT | VARCHAR2 | (30) | ||
| DOCUMENT_LINE_NUM | NUMBER | |||
| ACQUISITION_COST | NUMBER | |||
| VENDOR_ID | NUMBER | |||
| RCV_TRANSACTION_ID | NUMBER | |||
| PERIOD_ID | NUMBER | Y | Period ID |
APPS.CST_PAC_RECEIVING_VALUES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | ||
| LEGAL_ENTITY | NUMBER | |||
| LEGAL_ENTITY_NAME | VARCHAR2 | (240) | Y | |
| COST_GROUP_ID | NUMBER | Y | ||
| COST_GROUP | VARCHAR2 | (10) | Y | |
| MASTER_ORGANIZATION_ID | NUMBER | |||
| TRANSACTION_ID | NUMBER | Y | ||
| LAST_UPDATE_DATE | DATE | Y | ||
| LAST_UPDATED_BY | NUMBER | Y | ||
| CREATION_DATE | DATE | Y | ||
| CREATED_BY | NUMBER | Y | ||
| LAST_UPDATE_LOGIN | NUMBER | |||
| ORGANIZATION_ID | NUMBER | Y | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Y | |
| WIP_ENTITY_ID | NUMBER | Y | ||
| WIP_ENTITY_NAME | VARCHAR2 | (240) | ||
| PRIMARY_ITEM_ID | NUMBER | |||
| ACCT_PERIOD_ID | NUMBER | Y | ||
| DEPARTMENT_ID | NUMBER | |||
| DEPARTMENT_CODE | VARCHAR2 | (10) | ||
| TRANSACTION_TYPE | NUMBER | Y | ||
| TRANSACTION_TYPE_MEANING | VARCHAR2 | (80) | Y | |
| TRANSACTION_DATE | DATE | Y | ||
| GROUP_ID | NUMBER | |||
| LINE_ID | NUMBER | |||
| LINE_CODE | VARCHAR2 | (10) | ||
| SOURCE_CODE | VARCHAR2 | (30) | ||
| SOURCE_LINE_ID | NUMBER | |||
| OPERATION_SEQ_NUM | NUMBER | |||
| RESOURCE_SEQ_NUM | NUMBER | |||
| EMPLOYEE_ID | NUMBER | |||
| EMPLOYEE_NUM | VARCHAR2 | (30) | ||
| RESOURCE_ID | NUMBER | |||
| RESOURCE_CODE | VARCHAR2 | (10) | ||
| AUTOCHARGE_TYPE | NUMBER | |||
| AUTOCHARGE_TYPE_MEANING | VARCHAR2 | (80) | ||
| STANDARD_RATE_FLAG | NUMBER | |||
| STANDARD_RATE_MEANING | VARCHAR2 | (80) | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | |||
| BASIS_TYPE | NUMBER | |||
| BASIS_TYPE_MEANING | VARCHAR2 | (80) | ||
| TRANSACTION_QUANTITY | NUMBER | |||
| TRANSACTION_UOM | VARCHAR2 | (3) | ||
| PRIMARY_QUANTITY | NUMBER | |||
| PRIMARY_UOM | VARCHAR2 | (3) | ||
| ACTUAL_RESOURCE_RATE | NUMBER | |||
| STANDARD_RESOURCE_RATE | NUMBER | |||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (10) | ||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| CURRENCY_ACTUAL_RESOURCE_RATE | NUMBER | |||
| ACTIVITY_ID | NUMBER | |||
| ACTIVITY | VARCHAR2 | (10) | ||
| REASON_ID | NUMBER | |||
| REASON_NAME | VARCHAR2 | (30) | ||
| REFERENCE | VARCHAR2 | (240) | ||
| MOVE_TRANSACTION_ID | NUMBER | |||
| PO_HEADER_ID | NUMBER | |||
| PO_NUMBER | VARCHAR2 | (20) | ||
| PROJECT_ID | NUMBER | |||
| PROJECT_NUMBER | VARCHAR2 | (25) | ||
| TASK_NUMBER | VARCHAR2 | (25) | ||
| TASK_ID | NUMBER | |||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ATTRIBUTE15 | VARCHAR2 | (150) | ||
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE |
APPS.CST_PAC_WIP_TXN_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCT_PERIOD_ID | NUMBER | Y | Accounting period identifier | |
| WIP_ENTITY_ID | NUMBER | Y | WIP job or repetitive assembly identifier | |
| LINE_ID | NUMBER | WIP repetitive line identifier | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| COST_ELEMENT | VARCHAR2 | (50) | Y | Cost element name |
| VALUATION_ACCOUNT | NUMBER | WIP valuation account | ||
| TL_VALUE_IN | NUMBER | This level cost incurred | ||
| TL_VALUE_OUT | NUMBER | This level cost relieved | ||
| PL_VALUE_IN | NUMBER | Previous level cost incurred | ||
| PL_VALUE_OUT | NUMBER | Previous level cost relieved | ||
| VALUE_IN | NUMBER | Total cost incurred | ||
| VALUE_OUT | NUMBER | Total cost relieved | ||
| VAR | NUMBER | Total variance | ||
| NET_ACTIVITY | NUMBER | Cost incurred minus cost relieved |
APPS.CST_PERIOD_BALANCES_VIEW is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
Prior to 11.5.10 (Patchset J), period end summarization for PJM or WMS enabled organizations was stored by cost group in MTL_PERIOD_CG_SUMMARY. In 11.5.10, the period end summarization process populates CST_PERIOD_CLOSE_SUMMARY with item level information.
This view combines the old data with a grouping of the new data by cost group to provide uniform backward compatible access of the summary information.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCT_PERIOD_ID | NUMBER | Accounting period identifier | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| COST_GROUP_ID | NUMBER | Cost group identifier | ||
| COST_GROUP | VARCHAR2 | (10) | Cost group | |
| DESCRIPTION | VARCHAR2 | (240) | Cost group description | |
| INVENTORY_VALUE | NUMBER | Period end value used as baseline for next period summary. |
APPS.CST_PERIOD_CG_SUMMARY_V is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
Prior to 11.5.10 (Patchset J), period end summarization for non-PJM and non-WMS enabled organizations was stored by subinventory in MTL_PERIOD_SUMMARY. In 11.5.10, the period end summarization process populates CST_PERIOD_CLOSE_SUMMARY with item level information.
This view combines the old data with a grouping of the new data by subinventory to provide uniform backward compatible access of the summary information.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCT_PERIOD_ID | NUMBER | Accounting period identifier | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| SECONDARY_INVENTORY | VARCHAR2 | (10) | Subinventory identifier | |
| DESCRIPTION | VARCHAR2 | (80) | Subinventory description | |
| INVENTORY_VALUE | NUMBER | Period end value used as baseline for next period summary. |
APPS.CST_PERIOD_SUMMARY_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | Y | ORACLE session identifier | |
| WIP_ENTITY_ID | NUMBER | Y | WIP job or repetitive assembly identifier | |
| LINE_ID | NUMBER | WIP repetitive line identifier | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_ELEMENT | VARCHAR2 | (50) | Y | Cost element |
| TL_VALUE_IN | NUMBER | This level cost incurred | ||
| TL_VALUE_OUT | NUMBER | This level cost relieved | ||
| PL_VALUE_IN | NUMBER | Previous level cost incurred | ||
| PL_VALUE_OUT | NUMBER | Previous level cost relieved | ||
| VALUE_IN | NUMBER | Total cost incurred | ||
| VALUE_OUT | NUMBER | Total cost relieved | ||
| VAR | NUMBER | Total variance | ||
| NET_ACTIVITY | NUMBER | Cost incurred minus cost relieved | ||
| ACCOUNT_ID | NUMBER | Y | Account Identifier |
APPS.CST_PERIOD_VALUE_V is not referenced by any database object
A public view which may be useful for custom reporting or other data requirements.
Prior to 11.5.10 (Patchset J), period end summarization for actual costing organizations were stored by item in MTL_PER_CLOSE_DTLS. In 11.5.10, the period end summarization process populates CST_PERIOD_CLOSE_SUMMARY with item level information.
This view combines the old and new data to provide uniform backward compatible access of the summary information.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCT_PERIOD_ID | NUMBER | Accounting period identifier | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| COST_GROUP_ID | NUMBER | Cost group identifier | ||
| SECONDARY_INVENTORY | VARCHAR2 | (10) | Subinventory identifier | |
| INVENTORY_ITEM_ID | NUMBER | Item identifier | ||
| PERIOD_END_QUANTITY | NUMBER | Quantity at period end | ||
| PERIOD_END_UNIT_COST | NUMBER | Unit cost at period end |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | transaction id of the transaction | ||
| ORGANIZATION_ID | NUMBER | Organization Identifier | ||
| TRANSACTION_ACTION_ID | NUMBER | Determines the action for a given transaction | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Detemines the transaction's source type | ||
| TYPE_CLASS | NUMBER | Class of the Transaction Type for a transaction | ||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | Expenditure Type of the transaction. Is Populated only for Capital Project Txn. | |
| TRANSACTION_DATE | DATE | Date on which the transaction was made | ||
| PROJECT_ID | NUMBER | (15) | project to which locator of the transaction refers to | |
| TASK_ID | NUMBER | (15) | Task assigned or to which the locator the transaction refers to | |
| INVENTORY_ITEM_ID | NUMBER | Item the transaction refers to | ||
| PRIMARY_QUANTITY | NUMBER | quantity the transaction refers to | ||
| COSTED_FLAG | VARCHAR2 | (1) | Flag to indicate whether or not the transaction was cost processed | |
| PRIMARY_COST_METHOD | NUMBER | Flag to indicate the costing method used for this transaction | ||
| AVG_RATES_COST_TYPE_ID | NUMBER | ID for the Average Rates Cost Type | ||
| ITEM_DESCRIPTION | VARCHAR2 | (240) | description of the item the transaction refers to | |
| COST_GROUP_ID | NUMBER | cost group to which the project of the locator the transaction refers to | ||
| TRANSFER_COST_GROUP_ID | NUMBER | cost group to which the project of the transfer locator the transaction refers to | ||
| TRANSACTION_SOURCE_ID | NUMBER | Transactions Source Document Number (WO or PO etc) | ||
| TO_PROJECT_ID | NUMBER | (15) | project referred by the transfer locator of the transaction | |
| TO_TASK_ID | NUMBER | (15) | task assigned or referred by the transfer locator of the transaction | |
| SOURCE_PROJECT_ID | NUMBER | project referred to by the job or capital project transaction | ||
| SOURCE_TASK_ID | NUMBER | task referred to by the job or capital project transaction | ||
| TRANSFER_TRANSACTION_ID | NUMBER | transaction id of the transaction the current transaction refers to | ||
| ACCT_PERIOD_ID | NUMBER | Accounting period to which the transaction belongs to | ||
| EXP_ORG_ID | NUMBER | derived column using the decode statement given below: decode(mtt.type_class,1,mmt.pa_expenditure_org_id,mmt.organization_id) | ||
| DISTRIBUTION_ACCOUNT_ID | NUMBER | Account given on a miscellaneous transaction | ||
| PM_COST_COLLECTOR_GROUP_ID | NUMBER | group id assigned to the transaction for cost collection | ||
| SI_ASSET_YES_NO | NUMBER | Indicates whether SI the transaction refers to is an Asset or Expense | ||
| TRANSFER_SI_ASSET_YES_NO | NUMBER | Indicates whether Transfer SI the transaction refers to is an Asset or Expense | ||
| PM_COST_COLLECTED | VARCHAR2 | (1) | Indicates whether or not cost collection was performed for the current transaction | |
| SUBINVENTORY_CODE | VARCHAR2 | (10) | subinventory to which the transaction refers to | |
| TRANSFER_SUBINVENTORY | VARCHAR2 | (10) | Subinventory from where the material was transferred to/from | |
| TRANSFER_ORGANIZATION_ID | NUMBER | organization from which the transfer took place | ||
| INVENTORY_ASSET_FLAG | VARCHAR2 | (1) | Indicates whther the item the transaction refers to is an expense or asset. | |
| FLOW_SCHEDULE | VARCHAR2 | (1) | a flag to indicate if the transaction source is a continuous flow schedule |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PROJECT_ID | NUMBER | The project identifier of the transaction | ||
| TASK_ID | NUMBER | The task identifier of the transaction. | ||
| ORGANIZATION_ID | NUMBER | The organization identifier of the transaction. | ||
| TRANSACTION_ID | NUMBER | The transaction id of the transaction. | ||
| PA_DATE | VARCHAR2 | (0) | The period date of Project Accounting based on the transaction date. | |
| TRANSACTION_DATE | DATE | Transaction Date of the transaction | ||
| ORIG_TRANSACTION_TABLE | NUMBER | It indicates the transaction table in use - 1 for mtl_material_transactions and 2 for wip_transactions. | ||
| USER_REASON | VARCHAR2 | (4000) | A predefined reason which indicates why the corresponding transaction is not transferred to the PA interface.It can be either 'Error during cost collection' or 'Awaiting cost collection'. The seed data is in PA_EXCEPTION_REASONS. | |
| USER_ACTION | VARCHAR2 | (4000) | A predefined recommended action. The seed data is in PA_EXCEPTION_REASONS. | |
| EXCEPTION_CODE | VARCHAR2 | (5) | Exception code for the transaction |
APPS.CST_PM_PENDING_TXN_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PROJECT_ID | NUMBER | Project Identifier | ||
| TASK_ID | NUMBER | Task Identifier | ||
| TRANSACTION_SOURCE | CHAR | (20) | Source of the commitment, i.e Oracle Manufacturing. | |
| LINE_TYPE | CHAR | (1) | Commitment line type, could be Purchase Order or Requisition. | |
| CMT_NUMBER | VARCHAR2 | (20) | Commitment document number. | |
| CMT_DISTRIBUTION_ID | NUMBER | Identifier of the Req or PO distrbution. | ||
| CMT_HEADER_ID | NUMBER | Transaction source or purchase order header identifier. | ||
| DESCRIPTION | VARCHAR2 | (240) | Description of the Item on the document distribution. | |
| EXPENDITURE_ITEM_DATE | DATE | Expenditure Item Date. | ||
| PA_PERIOD | VARCHAR2 | (20) | PA period corresponding to the commitment. | |
| GL_PERIOD | VARCHAR2 | (15) | GL period corresponding to the PA period. | |
| CMT_LINE_NUMBER | NUMBER | The line number of the commitment. | ||
| CMT_CREATION_DATE | DATE | Date on which the commitment was created. | ||
| CMT_APPROVED_DATE | DATE | Date on which the document was approved. | ||
| CMT_REQUESTOR_NAME | VARCHAR2 | (0) | Name of the requestor. | |
| CMT_BUYER_NAME | VARCHAR2 | (0) | Name of the buyer. | |
| CMT_APPROVED_FLAG | CHAR | (1) | Is the commitment approved - Y/N ? | |
| CMT_PROMISED_DATE | DATE | Promised delivery date for the commitment. | ||
| CMT_NEED_BY_DATE | DATE | Date on which commitment is needed. | ||
| ORGANIZATION_ID | NUMBER | Expenditure organization_id. | ||
| VENDOR_ID | NUMBER | Supplier Id. | ||
| VENDOR_NAME | VARCHAR2 | (240) | Supplier Name. | |
| EXPENDITURE_TYPE | VARCHAR2 | (4000) | Expenditure Type | |
| EXPENDITURE_CATEGORY | VARCHAR2 | (30) | Expenditure Category. | |
| REVENUE_CATEGORY | VARCHAR2 | (30) | Revenue Category. | |
| SYSTEM_LINKAGE_FUNCTION | VARCHAR2 | (15) | The system linkage that classifies the expenditure type in order to drive system processing for the items classified by the expenditure type in PA. | |
| UNIT_OF_MEASURE | VARCHAR2 | (3) | Unit of Measure. | |
| UNIT_PRICE | NUMBER | Unit price. | ||
| CMT_IND_COMPILED_SET_ID | NUMBER | Identifier for indirect compiled set. Not currently used by mfg. | ||
| DENOM_RAW_COST | NUMBER | |||
| DENOM_BURDENED_COST | NUMBER | |||
| ACCT_RAW_COST | NUMBER | |||
| ACCT_BURDENED_COST | NUMBER | |||
| TOT_CMT_QUANTITY | NUMBER | Outstanding qty of the project related commitment distribution. | ||
| QUANTITY_ORDERED | NUMBER | Distribution ordered quantity. | ||
| AMOUNT_ORDERED | NUMBER | Distribution amount ordered. | ||
| ORIGINAL_QUANTITY_ORDERED | NUMBER | Original quantity ordered of the PO commitment. | ||
| ORIGINAL_AMOUNT_ORDERED | NUMBER | Original amount ordered of the commitment. | ||
| QUANTITY_CANCELLED | NUMBER | Quantity cancelled of the commitment. | ||
| AMOUNT_CANCELLED | NUMBER | Amount cancelled of the commitment. | ||
| QUANTITY_DELIVERED | NUMBER | Quantity delivered of the commitment. | ||
| AMOUNT_DELIVERED | NUMBER | Amount delivered of the commitment. | ||
| DENOM_AMOUNT_DELIVERED | NUMBER | |||
| QUANTITY_INVOICED | NUMBER | Qty invoiced of the commitment. | ||
| AMOUNT_INVOICED | NUMBER | Amount invoiced for the commitment. | ||
| QUANTITY_OUTSTANDING_DELIVERY | NUMBER | Quantity outstanding of the commitment. | ||
| AMOUNT_OUTSTANDING_DELIVERY | NUMBER | Amount outstanding of the commitment. | ||
| QUANTITY_OUTSTANDING_INVOICE | NUMBER | Quantity outstanding invoice. | ||
| DENOM_AMT_OUTSTANDING_INVOICE | NUMBER | |||
| AMOUNT_OUTSTANDING_INVOICE | NUMBER | Amount outstanding invoice. | ||
| QUANTITY_OVERBILLED | NUMBER | Quantity overbilled. | ||
| AMOUNT_OVERBILLED | NUMBER | Amount overbilled. | ||
| ORIGINAL_TXN_REFERENCE1 | VARCHAR2 | (15) | Transaction Id of the Mfg transaction is stored here. | |
| ORIGINAL_TXN_REFERENCE2 | VARCHAR2 | (15) | Transaction reference 2. | |
| ORIGINAL_TXN_REFERENCE3 | VARCHAR2 | (15) | Transaction reference 3. | |
| LAST_UPDATE_DATE | DATE | Who column. | ||
| LAST_UPDATED_BY | NUMBER | Who column. | ||
| CREATION_DATE | DATE | Who column. | ||
| CREATED_BY | NUMBER | Who column. | ||
| LAST_UPDATE_LOGIN | NUMBER | Who column. | ||
| REQUEST_ID | NUMBER | Who column. | ||
| PROGRAM_APPLICATION_ID | NUMBER | Who column. | ||
| PROGRAM_ID | NUMBER | Who column. | ||
| PROGRAM_UPDATE_DATE | DATE | Who column. | ||
| ACCT_RATE_DATE | DATE | |||
| ACCT_RATE_TYPE | VARCHAR2 | (0) | ||
| ACCT_EXCHANGE_RATE | NUMBER | |||
| DENOM_CURRENCY_CODE | VARCHAR2 | (15) | ||
| ACCT_CURRENCY_CODE | VARCHAR2 | (15) | ||
| INVENTORY_ITEM_ID | NUMBER | INVENTORY ITEM ID | ||
| INVENTORY_ITEM_NAME | VARCHAR2 | (40) | INVENTORY ITEM NAME | |
| WIP_RESOURCE_ID | NUMBER | WIP RESOURCE ID on the transaction | ||
| WIP_RESOURCE_NAME | VARCHAR2 | (10) | RESOURCE CODE | |
| UOM_MEANING | VARCHAR2 | (25) | UNIT OF MEASURE MEANING | |
| ORG_ID | NUMBER | (15) | ORG ID |
APPS.CST_PROJMFG_CMT_BASIC_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PROJECT_ID | NUMBER | project identifier | ||
| TASK_ID | NUMBER | |||
| TRANSACTION_SOURCE | VARCHAR2 | (0) | ||
| LINE_TYPE | VARCHAR2 | (0) | ||
| CMT_NUMBER | VARCHAR2 | (0) | ||
| CMT_DISTRIBUTION_ID | NUMBER | |||
| CMT_HEADER_ID | NUMBER | |||
| DESCRIPTION | VARCHAR2 | (0) | ||
| EXPENDITURE_ITEM_DATE | DATE | |||
| PA_PERIOD | VARCHAR2 | (0) | ||
| GL_PERIOD | VARCHAR2 | (0) | ||
| CMT_LINE_NUMBER | NUMBER | |||
| CMT_CREATION_DATE | DATE | |||
| CMT_APPROVED_DATE | DATE | |||
| CMT_REQUESTOR_NAME | VARCHAR2 | (0) | ||
| CMT_BUYER_NAME | VARCHAR2 | (0) | ||
| CMT_APPROVED_FLAG | VARCHAR2 | (0) | ||
| CMT_PROMISED_DATE | DATE | |||
| CMT_NEED_BY_DATE | DATE | |||
| ORGANIZATION_ID | NUMBER | |||
| VENDOR_ID | NUMBER | |||
| VENDOR_NAME | VARCHAR2 | (0) | ||
| EXPENDITURE_TYPE | VARCHAR2 | (0) | ||
| EXPENDITURE_CATEGORY | VARCHAR2 | (0) | ||
| REVENUE_CATEGORY | VARCHAR2 | (0) | ||
| SYSTEM_LINKAGE_FUNCTION | VARCHAR2 | (0) | ||
| UNIT_OF_MEASURE | VARCHAR2 | (0) | ||
| UNIT_PRICE | NUMBER | |||
| CMT_IND_COMPILED_SET_ID | NUMBER | |||
| DENOM_RAW_COST | NUMBER | |||
| DENOM_BURDENED_COST | NUMBER | |||
| ACCT_RAW_COST | NUMBER | |||
| ACCT_BURDENED_COST | NUMBER | |||
| TOT_CMT_QUANTITY | NUMBER | |||
| QUANTITY_ORDERED | NUMBER | |||
| AMOUNT_ORDERED | NUMBER | |||
| ORIGINAL_QUANTITY_ORDERED | NUMBER | |||
| ORIGINAL_AMOUNT_ORDERED | NUMBER | |||
| QUANTITY_CANCELLED | NUMBER | |||
| AMOUNT_CANCELLED | NUMBER | |||
| QUANTITY_DELIVERED | NUMBER | |||
| AMOUNT_DELIVERED | NUMBER | |||
| DENOM_AMOUNT_DELIVERED | NUMBER | |||
| QUANTITY_INVOICED | NUMBER | |||
| AMOUNT_INVOICED | NUMBER | |||
| QUANTITY_OUTSTANDING_DELIVERY | NUMBER | |||
| AMOUNT_OUTSTANDING_DELIVERY | NUMBER | |||
| QUANTITY_OUTSTANDING_INVOICE | NUMBER | |||
| DENOM_AMT_OUTSTANDING_INVOICE | NUMBER | |||
| AMOUNT_OUTSTANDING_INVOICE | NUMBER | |||
| QUANTITY_OVERBILLED | NUMBER | |||
| AMOUNT_OVERBILLED | NUMBER | |||
| ORIGINAL_TXN_REFERENCE1 | VARCHAR2 | (0) | ||
| ORIGINAL_TXN_REFERENCE2 | VARCHAR2 | (0) | ||
| ORIGINAL_TXN_REFERENCE3 | VARCHAR2 | (0) | ||
| LAST_UPDATE_DATE | DATE | |||
| LAST_UPDATED_BY | NUMBER | |||
| CREATION_DATE | DATE | |||
| CREATED_BY | NUMBER | |||
| LAST_UPDATE_LOGIN | NUMBER | |||
| REQUEST_ID | NUMBER | |||
| PROGRAM_APPLICATION_ID | NUMBER | |||
| PROGRAM_ID | NUMBER | |||
| PROGRAM_UPDATE_DATE | DATE | |||
| ACCT_RATE_DATE | DATE | |||
| ACCT_RATE_TYPE | VARCHAR2 | (0) | ||
| ACCT_EXCHANGE_RATE | NUMBER | |||
| DENOM_CURRENCY_CODE | VARCHAR2 | (0) | ||
| ACCT_CURRENCY_CODE | VARCHAR2 | (0) | ||
| INVENTORY_ITEM_ID | NUMBER | INVENTORY ITEM ID | ||
| INVENTORY_ITEM_NAME | VARCHAR2 | (0) | INVENTORY ITEM NAME | |
| WIP_RESOURCE_ID | NUMBER | WIP RESOURCE ID | ||
| WIP_RESOURCE_NAME | VARCHAR2 | (0) | WIP RESOURCE NAME | |
| UOM_MEANING | VARCHAR2 | (0) | UOM meaning |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EXPENDITURE_TYPE | VARCHAR2 | (30) | Expenditure type | |
| EXPENDITURE_TYPE_ID | NUMBER | (15) | Expenditure Type ID | |
| DESCRIPTION | VARCHAR2 | (250) | description of the expenditure type | |
| COST_ELEMENT_ID | NUMBER | cost element to which the expenditure type relates to | ||
| SYS_LINK_START_DATE | DATE | activation date of system linkage | ||
| SYS_LINK_END_DATE | DATE | disable date of system linkage | ||
| EXP_TYPE_START_DATE | DATE | activation date of an expenditure type | ||
| EXP_TYPE_END_DATE | DATE | disable date of an expenditure type | ||
| UNIT_OF_MEASURE | VARCHAR2 | (30) | Unit of measure |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LAYER_ID | NUMBER | Y | Unique layer identifier generated by the sequence CST_QUANTITY_LAYERS_S. | |
| PL_MATERIAL | NUMBER | Previous level material cost | ||
| PL_MATERIAL_OVERHEAD | NUMBER | Previous level material overhead cost | ||
| PL_RESOURCE | NUMBER | Previous level resource cost | ||
| PL_OUTSIDE_PROCESSING | NUMBER | Previous level outside processing cost | ||
| PL_OVERHEAD | NUMBER | Previous level overhead cost | ||
| TL_MATERIAL | NUMBER | This level material cost. | ||
| TL_MATERIAL_OVERHEAD | NUMBER | This level material overhead cost. | ||
| TL_RESOURCE | NUMBER | This level resource cost. | ||
| TL_OUTSIDE_PROCESSING | NUMBER | This level outside processing cost. | ||
| TL_OVERHEAD | NUMBER | This level overhead cost. | ||
| MATERIAL_COST | NUMBER | Material cost. | ||
| MATERIAL_OVERHEAD_COST | NUMBER | Material overhead cost | ||
| RESOURCE_COST | NUMBER | Resource cost. | ||
| OUTSIDE_PROCESSING_COST | NUMBER | Outside processing cost. | ||
| OVERHEAD_COST | NUMBER | Overhead cost. | ||
| PL_ITEM_COST | NUMBER | Previous level item cost. | ||
| TL_ITEM_COST | NUMBER | This level item cost. | ||
| ITEM_COST | NUMBER | Layer item cost. | ||
| UNBURDENED_COST | NUMBER | Item unit cost minus this level material overhead | ||
| BURDEN_COST | NUMBER | This level material overhead. |
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Unique Row Identifier | |
| ORGANIZATION_ID | NUMBER | Organization in which the accounting event is being generated | ||
| OPERATING_UNIT_ID | NUMBER | Operating Unit in which the event is being generated | ||
| ORGANIZATION_NAME | VARCHAR2 | (240) | Name of Inventory Organization | |
| ORG_CODE | VARCHAR2 | (3) | Code of Inventory Organization | |
| SET_OF_BOOKS_ID | NUMBER | (15) | Set Of Books Identifier | |
| TRANSACTION_ID | NUMBER | Receiving Transaction Unique Identifier | ||
| ACCOUNTING_EVENT_ID | NUMBER | Accounting Event Unique Identifier | ||
| EVENT_TYPE_ID | NUMBER | Accounting Event Type Identifier | ||
| EVENT_TYPE_NAME | VARCHAR2 | (240) | Accounting Event Type Name | |
| TRANSACTION_DATE | DATE | Transaction date | ||
| TRANSACTION_QUANTITY | NUMBER | Transaction Quantity | ||
| TRANSACTION_UOM | VARCHAR2 | (3) | Transaction Unit of Measure | |
| PRIMARY_QUANTITY | NUMBER | Transaction quantity in item's primary unit of measure. | ||
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | Item primary unit of measure | |
| PO_HEADER_ID | NUMBER | Purchase Order Header Unique Identifier | ||
| PO_HEADER_NUM | VARCHAR2 | (20) | Purchase Order Number | |
| PO_LINE_ID | NUMBER | Purchase Order Line Unique Identifier | ||
| PO_LINE_NUM | NUMBER | PO LIne Number | ||
| PO_DISTRIBUTION_ID | NUMBER | Purchase Order Distribution Unique Identifier | ||
| PO_RELEASE_ID | NUMBER | Purchase Order Release Unique Identifier | ||
| RELEASE_NUM | NUMBER | Release Number | ||
| REQUISITION_ID | NUMBER | Requisition header unique identifier | ||
| REQUISITION_NUM | VARCHAR2 | (20) | Requisition Number | |
| REQUISITION_LINE_ID | NUMBER | Requisition line unique identifier | ||
| REQUISITION_LINE_NUM | NUMBER | Requisition line number | ||
| PO_VENDOR_ID | NUMBER | Supplier unique identifier | ||
| PO_VENDOR_NAME | VARCHAR2 | (240) | Supplier name | |
| PO_VENDOR_SITE_ID | NUMBER | Supplier site unique identifier | ||
| PO_VENDOR_SITE_NAME | VARCHAR2 | (15) | Supplier site name | |
| RECEIPT_NUM | VARCHAR2 | (30) | Receipt number | |
| SHIPMENT_NUM | VARCHAR2 | (30) | Shipment number assigned by the shipment's source | |
| SHIPMENT_HEADER_ID | NUMBER | Receipt header unique identifier | ||
| RECEIPT_LINE_NUM | NUMBER | Receipt line number | ||
| SHIPMENT_LINE_ID | NUMBER | Shipment line unique identifier | ||
| RECEIVING_LOCATION_ID | NUMBER | Receiving location unique identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Item unique identifier | ||
| ITEM_DESCRIPTION | VARCHAR2 | (240) | Item description | |
| REVISION | VARCHAR2 | (3) | Item revision | |
| UNIT_PRICE | NUMBER | Unit Price in PO unit of measure. Could be PO price or transfer price | ||
| PRIOR_UNIT_PRICE | NUMBER | Prior unit price. Used only for retroactive pricing and landed cost adjustment events | ||
| UNIT_LANDED_COST | NUMBER | Landed cost of the LCM shipment | ||
| INTERCOMPANY_PRICING_OPTION | NUMBER | Flag that indicates if Unit Price is at PO price or Transfer Price. 1-PO price 2-Transfer price | ||
| TRANSACTION_AMOUNT | NUMBER | Transaction Amount. Used only for service line types | ||
| NR_TAX | NUMBER | Non-recoverable Tax | ||
| REC_TAX | NUMBER | Recoverable Tax | ||
| NR_TAX_AMOUNT | NUMBER | Nonrecoverable tax amount. Used for service line types. | ||
| REC_TAX_AMOUNT | NUMBER | Recoverable tax amount. Used only for service line types. | ||
| PRIOR_NR_TAX | NUMBER | Prior non-recoverable tax. Only applicable for retroactive pricing. | ||
| PRIOR_REC_TAX | NUMBER | Prior recoverable tax. Only applicable for retroactive pricing. | ||
| CURRENCY_CODE | VARCHAR2 | (15) | Currency Code | |
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | Currency Conversion Type | |
| CURRENCY_CONVERSION_RATE | NUMBER | Currency Conversion Rate | ||
| CURRENCY_CONVERSION_DATE | DATE | Currency Conversion date | ||
| ACCOUNTED_FLAG | VARCHAR2 | (1) | Flag that indicates if accounting entries have been created for the accounting event | |
| PROCUREMENT_ORG_FLAG | VARCHAR2 | (1) | Flag that indicates if event is for the supplier facing operating unit | |
| CROSS_OU_FLAG | VARCHAR2 | (1) | Flag that indicates if transaction is for a PO that crosses operating units | |
| TRX_FLOW_HEADER_ID | NUMBER | Identifier of the transaction flow being used for the event. Only applicable for Shared Services scenarios. | ||
| INVOICED_FLAG | VARCHAR2 | (1) | Flag that indicates if the event has been processed by the Intercompany invoicing program. Only applicable to invoice match and invoice reversal events. | |
| PA_ADDITION_FLAG | VARCHAR2 | (1) | Flag that indicates if project related receipts have been transferred to projects | |
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
APPS.CST_RCV_RAE_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | Unique Row Identifier | |
| ACCOUNTING_EVENT_ID | NUMBER | Accounting Event Unique Identifier | ||
| RCV_TRANSACTION_ID | NUMBER | Y | Receiving Transaction Unique Identifier | |
| ACCOUNTING_DATE | DATE | Y | Effective transaction date | |
| ACCOUNTED_DR | NUMBER | Debit amount in base currency | ||
| ACCOUNTED_CR | NUMBER | Credit amount in base currency | ||
| ENTERED_DR | NUMBER | Debit amount in entered currency | ||
| ENTERED_CR | NUMBER | Credit amount in entered currency | ||
| CURRENCY_CONVERSION_DATE | DATE | Currency conversion date | ||
| CURRENCY_CONVERSION_RATE | NUMBER | Currency exchange rate | ||
| FUNCTIONAL_CURRENCY_CODE | VARCHAR2 | (15) | Base currency unique identifier | |
| CHART_OF_ACCOUNTS_ID | NUMBER | Chart of accounts unique identifier | ||
| ACCOUNTING_LINE_TYPE | VARCHAR2 | (30) | Accounting Line Type | |
| CURRENCY_CODE | VARCHAR2 | (15) | Y | Currency unique identifier |
| CODE_COMBINATION_ID | NUMBER | GL account unique identifier | ||
| LAST_UPDATE_DATE | DATE | Y | Standard Who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard Who column | |
| CREATION_DATE | DATE | Y | Standard Who column | |
| CREATED_BY | NUMBER | Y | Standard Who column | |
| LAST_UPDATE_LOGIN | NUMBER | Y | Standard Who column | |
| REQUEST_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_ID | NUMBER | Concurrent Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent Who column |
APPS.CST_RCV_RRSL_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LOOKUP_CODE | VARCHAR2 | (30) | Y | |
| LOOKUP_TYPE | VARCHAR2 | (30) | Y | |
| DISPLAYED_FIELD | VARCHAR2 | (80) | Y | |
| DESCRIPTION | VARCHAR2 | (240) |
APPS.CST_RECONCILIATION_CODES is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | ||
| RESOURCE_ID | NUMBER | Y | Resource identifier (sub-element) | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| COST_TYPE_CODE | VARCHAR2 | (10) | Y | Cost type name |
| COST_TYPE_DESC | VARCHAR2 | (240) | Description | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| RESOURCE_RATE | NUMBER | Y | Resource unit cost | |
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who column | ||
| PROGRAM_ID | NUMBER | Concurrent who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent who column | ||
| ALLOW_UPDATES_FLAG | NUMBER | Whether the costs defined for this cost type can be changed |
APPS.CST_RESOURCE_COSTS_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Resource identifier (sub-element) | ||
| COST_TYPE_ID | NUMBER | Cost type identifier | ||
| COST_TYPE | VARCHAR2 | (10) | Cost type name | |
| DESCRIPTION | VARCHAR2 | (240) | Description | |
| ALLOW_UPDATES_FLAG | NUMBER | Whether the costs defined for this cost type can be changed |
APPS.CST_RESOURCE_COST_TYPES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROW_ID | ROWID | (10) | ||
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| COST_TYPE | VARCHAR2 | (10) | Y | Cost type name |
| COST_TYPE_DESC | VARCHAR2 | (240) | Description | |
| RESOURCE_ID | NUMBER | Y | Resource identifier (sub-element) | |
| RESOURCE_CODE | VARCHAR2 | (10) | Y | Resource code |
| RESOURCE_DESC | VARCHAR2 | (240) | Description | |
| OVERHEAD_ID | NUMBER | Y | Overhead sub-element identifier | |
| OVERHEAD_CODE | VARCHAR2 | (10) | Y | Resource code |
| OVERHEAD_DESC | VARCHAR2 | (240) | Description | |
| COST_CODE_TYPE | NUMBER | Y | Cost code type | |
| LAST_UPDATE_DATE | DATE | Y | Standard who column | |
| LAST_UPDATED_BY | NUMBER | Y | Standard who column | |
| CREATION_DATE | DATE | Y | Standard who column | |
| CREATED_BY | NUMBER | Y | Standard who column | |
| LAST_UPDATE_LOGIN | NUMBER | Standard who column | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| REQUEST_ID | NUMBER | Concurrent who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Concurrent who column | ||
| PROGRAM_ID | NUMBER | Concurrent who column | ||
| PROGRAM_UPDATE_DATE | DATE | Concurrent who column | ||
| ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
APPS.CST_RESOURCE_OVERHEADS_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| A | VARCHAR2 | (15) | Effective date of the assembly | |
| B | VARCHAR2 | (80) | Y | Rollup option, full or single level rollup |
| C | VARCHAR2 | (80) | Y | Range option |
| D | VARCHAR2 | (80) | Y | Include engineering bills or not |
| E | VARCHAR2 | (10) | Alternate designator | |
| F | VARCHAR2 | (10) | Alternate routing | |
| G | VARCHAR2 | (80) | Y | Include unimplemented ECN or not |
| H | NUMBER | Concatenated item flexfield segments | ||
| I | VARCHAR2 | (30) | Category set name | |
| J | VARCHAR2 | (240) | Category name | |
| K | VARCHAR2 | (240) | Inventory item from value | |
| L | VARCHAR2 | (240) | Inventory item to value | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| ROLLUP_ID | NUMBER | Rollup identifier | ||
| ROLLUP_DATE | DATE | Cost Rollup run date |
APPS.CST_ROLLUP_DATE_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROWIDTODEL | ROWID | (10) | ||
| TRANSACTION_ID | NUMBER | |||
| COST_ELEMENT_ID | NUMBER | Y | ||
| LEVEL_TYPE | NUMBER | |||
| UNIT_COST | NUMBER | Y | ||
| NEW_UNIT_COST | NUMBER | Y | ||
| COST_UPDATE_ID | NUMBER | Y |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ROWIDTODEL | ROWID | (10) | ||
| TRANSACTION_ID | NUMBER | |||
| COST_ELEMENT_ID | NUMBER | Y | ||
| LEVEL_TYPE | NUMBER | |||
| OLD_UNIT_COST | NUMBER | Y | ||
| UNIT_COST | NUMBER | Y | ||
| COST_UPDATE_ID | NUMBER | Y |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | Cost update session identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier | ||
| SUBINVENTORY | VARCHAR2 | (10) | Subinventory | |
| ADJUSTMENT_QUANTITY | NUMBER | Y | Adjustment quantity | |
| OLD_UNIT_COST | NUMBER | Old unit cost | ||
| NEW_UNIT_COST | NUMBER | New unit cost |
APPS.CST_STD_INV_ADJ_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | Cost update session identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| WIP_ENTITY_ID | NUMBER | WIP job or repetitive assembly identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Inventory item ID | ||
| TL_RESOURCE_IN | NUMBER | This level resource value earned | ||
| TL_OUTSIDE_PROCESSING_IN | NUMBER | This level outside processing value earned | ||
| TL_OVERHEAD_IN | NUMBER | This level overhead value earned | ||
| PL_MATERIAL_IN | NUMBER | Previous level material value earned | ||
| PL_MATERIAL_OVERHEAD_IN | NUMBER | Previous level material overhead value earned | ||
| PL_RESOURCE_IN | NUMBER | Previous level resource value earned | ||
| PL_OUTSIDE_PROCESSING_IN | NUMBER | Previous level outside processing earned | ||
| PL_OVERHEAD_IN | NUMBER | Previous level overhead value earned | ||
| TL_MATERIAL_OUT | NUMBER | This level material value relieved | ||
| TL_RESOURCE_OUT | NUMBER | This level resource value relieved | ||
| TL_OUTSIDE_PROCESSING_OUT | NUMBER | This level outside processing value relieved | ||
| TL_OVERHEAD_OUT | NUMBER | This level overhead value relieved | ||
| PL_MATERIAL_OUT | NUMBER | Previous level material value relieved | ||
| PL_MATERIAL_OVERHEAD_OUT | NUMBER | Previous level material overhead value relieved | ||
| PL_RESOURCE_OUT | NUMBER | Previous level resource value relieved | ||
| PL_OUTSIDE_PROCESSING_OUT | NUMBER | Previous level outside processing value relieved | ||
| PL_OVERHEAD_OUT | NUMBER | Previous level overhead value relieved | ||
| TL_MATERIAL_OVERHEAD_OUT | NUMBER | This level material overhead value relieved |
APPS.CST_STD_WIP_ADJ_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | Cost update session identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| INVENTORY_ITEM_ID | NUMBER | Inventory item identifier | ||
| COST_GROUP_ID | NUMBER | Cost Group Identifier | ||
| ADJUSTMENT_QUANTITY | NUMBER | Y | Adjustment quantity | |
| OLD_UNIT_COST | NUMBER | Old unit cost | ||
| NEW_UNIT_COST | NUMBER | New unit cost |
APPS.CST_STD_WMS_INV_ADJ_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SESSION_ID | NUMBER | ORACLE session identifier | ||
| INVENTORY_ITEM_ID | NUMBER | Y | Inventory item identifier | |
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_TYPE_ID | NUMBER | Y | Cost type identifier | |
| OPERATION_SEQ_NUM | VARCHAR2 | (0) | Unused | |
| OPERATION_SEQUENCE_ID | VARCHAR2 | (0) | Unused | |
| DEPARTMENT_ID | VARCHAR2 | (0) | Unused | |
| ACTIVITY_ID | VARCHAR2 | (0) | Unused | |
| RESOURCE_ID | VARCHAR2 | (0) | Unused | |
| ITEM_COST | NUMBER | Item unit cost | ||
| COST_ELEMENT_ID | VARCHAR2 | (0) | Unused | |
| THIS_LEVEL_COSTS | NUMBER | Total this level cost | ||
| PREVIOUS_LEVEL_COSTS | NUMBER | Total previous level cost | ||
| COLUMN1_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2A | VARCHAR2 | (0) | Unused | |
| COLUMN1_VALUE_2B | VARCHAR2 | (0) | Unused | |
| COLUMN2_VALUE_2B | VARCHAR2 | (0) | Unused | |
| DESCRIPTION_COLUMN | VARCHAR2 | (0) | Unused | |
| GUI_COLUMN1 | VARCHAR2 | (0) | Unused | |
| GUI_COLUMN2 | VARCHAR2 | (0) | Unused | |
| GUI_DESCRIPTION | VARCHAR2 | (0) | Unused |
APPS.CST_TOTAL_COST_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCT_PERIOD_ID | NUMBER | Y | Accounting period identifier | |
| PERIOD_NAME | VARCHAR2 | (15) | Y | GL period name |
| PERIOD_START_DATE | DATE | Y | Start date of accounting period | |
| SCHEDULE_CLOSE_DATE | DATE | Y | Scheduled close date of the accounting period | |
| WIP_ENTITY_ID | NUMBER | Y | WIP job or repetitive assembly identifier | |
| LINE_ID | NUMBER | WIP line identifier | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| COST_ELEMENT_ID | NUMBER | Y | Cost element identifier | |
| COST_ELEMENT | VARCHAR2 | (50) | Y | Cost element name |
| VALUATION_ACCOUNT | NUMBER | |||
| TL_VALUE_IN | NUMBER | |||
| TL_VALUE_OUT | NUMBER | |||
| PL_VALUE_IN | NUMBER | |||
| PL_VALUE_OUT | NUMBER | |||
| VALUE_IN | NUMBER | |||
| VALUE_OUT | NUMBER | |||
| VAR | NUMBER | |||
| NET_ACTIVITY | NUMBER |
APPS.CST_WIP_COST_ELEM_VARIANCES_V is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| WIP_ENTITY_ID | NUMBER | WIP job or repetitive assembly identifier | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| WIP_ENTITY_NAME | VARCHAR2 | (240) | WIP job or repetitive assembly name | |
| ENTITY_DESCRIPTION | VARCHAR2 | (240) | Description of the discrete job or repetitive assembly | |
| ENTITY_TYPE | NUMBER | WIP entity type code | ||
| ENTITY_TYPE_NAME | VARCHAR2 | (80) | ||
| LINE_ID | NUMBER | WIP line identifier | ||
| LINE_CODE | VARCHAR2 | (10) | Line name | |
| PRIMARY_ITEM_ID | NUMBER | Inventory item identifier of assembly the job creates | ||
| CLASS_CODE | VARCHAR2 | (10) | Accounting class associated with job | |
| REVISION | VARCHAR2 | (3) | Inventory item revision code | |
| STATUS_TYPE | NUMBER | Status of job | ||
| STATUS_DESCRIPTION | VARCHAR2 | (80) | ||
| ITEM_UOM | VARCHAR2 | (3) | Primary unit of measure code | |
| DATE_CLOSED | DATE | Date on which job was closed | ||
| ROW_ID | ROWID | (10) | ||
| LAST_UPDATE_DATE | DATE | Standard Who column | ||
| LAST_UPDATED_BY | NUMBER | Standard Who column | ||
| CREATION_DATE | DATE | Standard Who column | ||
| CREATED_BY | NUMBER | Standard Who column | ||
| LAST_UPDATE_LOGIN | NUMBER | Standard Who column | ||
| REQUEST_ID | NUMBER | Extended Who column | ||
| PROGRAM_APPLICATION_ID | NUMBER | Extended Who column | ||
| PROGRAM_ID | NUMBER | Extended Who column | ||
| PROGRAM_UPDATE_DATE | DATE | Extended Who column |
APPS.CST_WIP_ENTITY_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| WIP_ENTITY_ID | NUMBER | WIP job or repetitive assembly identifier | ||
| ORGANIZATION_ID | NUMBER | Organization identifier | ||
| WIP_ENTITY_NAME | VARCHAR2 | (240) | WIP job or repetitive assembly name | |
| ENTITY_DESCRIPTION | VARCHAR2 | (240) | Description of the discrete job or repetitive assembly | |
| ENTITY_TYPE | NUMBER | WIP entity type code | ||
| LINE_ID | NUMBER | WIP repetitive line identifier | ||
| LINE_CODE | VARCHAR2 | (10) | WIP repetitive line name | |
| PRIMARY_ITEM_ID | NUMBER | Inventory item identifier of assembly the job or schedule creates | ||
| CLASS_CODE | VARCHAR2 | (10) | Accounting class associated with job or repetitive assembly |
APPS.CST_WIP_ENTITY_VIEW is not referenced by any database object
A supplementary view used to simplify forms coding.
Warning: Oracle does not recommend you query or alter datausing this view. It may change dramatically in subsequent minor or major releases.
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| WIP_ENTITY_ID | NUMBER | (15) | Y | |
| WIP_LAYER_ID | NUMBER | (15) | Y | |
| OPERATION_SEQ_NUM | NUMBER | (15) | Y | |
| INVENTORY_ITEM_ID | NUMBER | (15) | Y | |
| INV_LAYER_ID | NUMBER | (15) | Y | |
| ISSUED_QUANTITY | NUMBER | Y | ||
| RELIEVED_QUANTITY | NUMBER | |||
| MATERIAL_COST | NUMBER | |||
| MATERIAL_OVERHEAD_COST | NUMBER | |||
| RESOURCE_COST | NUMBER | |||
| OUTSIDE_PROCESSING_COST | NUMBER | |||
| OVERHEAD_COST | NUMBER | |||
| TOTAL_UNIT_COST | NUMBER | |||
| CREATE_TRANSACTION_ID | NUMBER | (15) |
APPS.CST_WIP_LAYER_COSTS_DTLS_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCT_PERIOD_ID | NUMBER | Y | Accounting Period Identifier | |
| PERIOD_NAME | VARCHAR2 | (15) | Y | GL Period Name |
| PERIOD_START_DATE | DATE | Y | Start date of accounting period | |
| SCHEDULE_CLOSE_DATE | DATE | Y | Scheduled close date of the accounting period | |
| WIP_ENTITY_ID | NUMBER | Y | WIP job or schedule identifier | |
| LINE_ID | NUMBER | WIP line identifier | ||
| REPETITIVE_SCHEDULE_ID | NUMBER | WIP repetitive schedule identifier | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| POSTED_VAR | NUMBER | Posted variance | ||
| POTENTIAL_VAR | NUMBER | Potential variance | ||
| NET_ACTIVITY | NUMBER | Net activity |
APPS.CST_WIP_PERIOD_BALANCES_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PRODUCT_SHORT_NAME | CHAR | (3) | Product short name of the transaction type | |
| TRANSACTION_TYPE_ID | NUMBER | Transaction type code | ||
| TRANSACTION_TYPE_NAME | VARCHAR2 | (80) | Name of the transaction |
APPS.CST_WIP_TXN_TYPE_VIEW is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCT_PERIOD_ID | NUMBER | Accounting period identifier | ||
| PERIOD_NAME | VARCHAR2 | (15) | Y | GL period name |
| PERIOD_START_DATE | DATE | Y | Start date of accounting period | |
| SCHEDULE_CLOSE_DATE | DATE | Y | Scheduled close date of the accounting period | |
| WIP_ENTITY_ID | NUMBER | WIP job or repetitive assembly identifier | ||
| LINE_ID | NUMBER | WIP line identifier | ||
| REPETITIVE_SCHEDULE_ID | NUMBER | WIP repetitive schedule identifier | ||
| ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| POSTED_VAR | NUMBER | |||
| POTENTIAL_VAR | NUMBER | |||
| NET_ACTIVITY | NUMBER |
APPS.CST_WIP_VARIANCES_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACTIVITY_ID | NUMBER | Y | Activity identifier | |
| ACTIVITY_NAME | VARCHAR2 | (10) | Y | Activity name |
| ACTIVITY_DESCRIPTION | VARCHAR2 | (240) | Y | Description |
| ACTIVITY_OUTPUT_UOM | VARCHAR2 | (50) | Activity measurement unit | |
| VALUE_ADDED_ACTIVITY_FLAG | VARCHAR2 | (1) | ||
| ACTIVITY_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| ACTIVITY_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ACTIVITY_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ACTIVITY_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ACTIVITY_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ACTIVITY_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ACTIVITY_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ACTIVITY_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ACTIVITY_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ACTIVITY_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ACTIVITY_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ACTIVITY_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ACTIVITY_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ACTIVITY_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ACTIVITY_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ACTIVITY_ATTRIBUTE15 | VARCHAR2 | (150) |
APPS.CST_XLA_ACTIVITY_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ORGANIZATION_ID | NUMBER | Y | ||
| TRANSACTION_ID | NUMBER | Y | ||
| ACTUAL_COST | NUMBER | |||
| PRIOR_COST | NUMBER | |||
| NEW_COST | NUMBER | |||
| VARIANCE_AMOUNT | NUMBER | |||
| PAYBACK_VARIANCE_AMOUNT | NUMBER |
APPS.CST_XLA_ACTUAL_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EVENT_ID | NUMBER | (15) | ||
| WRITE_OFF_ID | NUMBER | Y | ||
| TRANSACTION_DATE | DATE | Y | ||
| WO_TRANSACTION_TYPE_CODE | VARCHAR2 | (25) | Y | |
| PO_DISTRIBUTION_ID | NUMBER | |||
| WO_OFFSET_ACCOUNT_ID | NUMBER | |||
| WO_ACCRUAL_ACCOUNT_ID | NUMBER | Y | ||
| WO_ERV_ACCOUNT_ID | NUMBER | |||
| WO_COMMENTS | VARCHAR2 | (240) | ||
| INVENTORY_ITEM_ID | NUMBER | |||
| VENDOR_ID | NUMBER | |||
| DESTINATION_TYPE_CODE | VARCHAR2 | (25) | ||
| OPERATING_UNIT_ID | NUMBER | Y | ||
| DISTRIBUTION_TYPE | CHAR | (14) | ||
| H_CURRENCY_CODE | VARCHAR2 | (15) | ||
| H_CURRENCY_CONVERSION_DATE | DATE | |||
| H_CURRENCY_CONVERSION_RATE | NUMBER | |||
| H_CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| TRANSFER_TO_GL_INDICATOR | CHAR | (1) | ||
| H_ACCOUNTED_AMOUNT | NUMBER | Y | ||
| H_ENTERED_AMOUNT | NUMBER | |||
| WO_ERV_AMOUNT | NUMBER | |||
| TOTAL_ACCRUAL_AMOUNT | NUMBER | |||
| FUNC_CURRENCY_CODE | VARCHAR2 | (15) | Y | |
| FUNC_CURRENCY_CONVERSION_RATE | NUMBER | |||
| FUNC_CURRENCY_CONVERSION_TYPE | VARCHAR2 | (0) | ||
| FUNC_CURRENCY_CONVERSION_DATE | DATE | |||
| H_LEDGER_ID | NUMBER | (15) | Y | |
| INVOICE_DISTRIBUTION_ID | NUMBER | |||
| INVENTORY_TRANSACTION_ID | NUMBER |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EVENT_ID | NUMBER | (15) | ||
| LINE_NUMBER | NUMBER | |||
| ENTERED_AMOUNT | NUMBER | |||
| ACCOUNTED_AMOUNT | NUMBER | |||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| LEDGER_ID | NUMBER | (15) |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CHG_DEPT_ID | NUMBER | Y | Department unique identifier | |
| CHG_DEPT_CODE | VARCHAR2 | (10) | Y | Department code |
| CHG_DEPT_DESCRIPTION | VARCHAR2 | (240) | Description | |
| CHG_DEPT_CLASS_CODE | VARCHAR2 | (10) | Department class code | |
| CHG_DEPT_MAINT_COST_CAT | VARCHAR2 | (30) | Maintenance Cost category | |
| CHG_DEPT_LOCATION_ID | NUMBER | Location identifier | ||
| CHG_DEPT_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| CHG_DEPT_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CHG_DEPT_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CHG_DEPT_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CHG_DEPT_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CHG_DEPT_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CHG_DEPT_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CHG_DEPT_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CHG_DEPT_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CHG_DEPT_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CHG_DEPT_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CHG_DEPT_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CHG_DEPT_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CHG_DEPT_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CHG_DEPT_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| CHG_DEPT_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
APPS.CST_XLA_CHARGE_DEPT_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_GROUP_ID | NUMBER | Y | Cost Group Identifier | |
| COST_GROUP_ORGANIZATION_ID | NUMBER | Organization Identifier | ||
| COST_GROUP | VARCHAR2 | (10) | Y | Cost group name |
APPS.CST_XLA_COST_GROUPS_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| COST_UPDATE_ID | NUMBER | Y | Cost update session identifier | |
| INV_ADJUSTMENT_ACCOUNT | NUMBER | Code combination identifier for the inventory adjustment account |
APPS.CST_XLA_COST_UPDATES_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CYCLE_COUNT_ENTRY_ID | NUMBER | Y | ||
| NUMBER_OF_COUNTS | NUMBER |
APPS.CST_XLA_CYCLE_COUNT_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DEPT_ID | NUMBER | Y | Department unique identifier | |
| DEPT_CODE | VARCHAR2 | (10) | Y | Department code |
| DEPT_DESCRIPTION | VARCHAR2 | (240) | Description | |
| DEPT_CLASS_CODE | VARCHAR2 | (10) | Department class code | |
| DEPT_MAINT_COST_CAT | VARCHAR2 | (30) | Maintenance Cost category | |
| DEPT_LOCATION_ID | NUMBER | Location identifier | ||
| DEPT_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| DEPT_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DEPT_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DEPT_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DEPT_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DEPT_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DEPT_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DEPT_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DEPT_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DEPT_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DEPT_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DEPT_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DEPT_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DEPT_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DEPT_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| DEPT_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
APPS.CST_XLA_DEPARTMENT_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DIS_JOB_WIP_ENTITY_ID | NUMBER | Y | WIP Job Identifier | |
| DIS_JOB_SOURCE_CODE | VARCHAR2 | (30) | Code of the process that generated the job record(null if created by Oracle Work In Process) | |
| DIS_JOB_DESCRIPTION | VARCHAR2 | (240) | Descriptive text | |
| DIS_JOB_STATUS_TYPE | NUMBER | Y | Status of job | |
| DIS_JOB_DEMAND_CLASS | VARCHAR2 | (30) | Type of demand the job satisfies | |
| DIS_JOB_TYPE | NUMBER | Y | Type of discrete job | |
| DIS_JOB_SUPPLY_TYPE | NUMBER | Y | Method of material consumption within WIP | |
| DIS_JOB_ISSUE_ZERO_COST | VARCHAR2 | (1) | ||
| DIS_JOB_SCHED_START_DATE | DATE | Y | ||
| DIS_JOB_SCHED_COMP_DATE | DATE | Y | ||
| DIS_JOB_RELEASE_DATE | DATE | |||
| DIS_JOB_COMP_DATE | DATE | |||
| DIS_JOB_CLOSE_DATE | DATE | |||
| DIS_JOB_DUE_DATE | DATE | |||
| DIS_JOB_PRIORITY | NUMBER | |||
| DIS_JOB_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| DIS_JOB_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| DIS_JOB_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| DIS_JOB_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| DIS_JOB_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| DIS_JOB_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| DIS_JOB_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| DIS_JOB_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| DIS_JOB_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| DIS_JOB_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| DIS_JOB_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| DIS_JOB_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| DIS_JOB_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| DIS_JOB_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| DIS_JOB_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| DIS_JOB_ATTRIBUTE15 | VARCHAR2 | (150) | ||
| DIS_JOB_BOM_REVISION | VARCHAR2 | (3) | ||
| DIS_JOB_ROUTING_REVISION | VARCHAR2 | (3) | ||
| DIS_JOB_ACCT_CLASS | VARCHAR2 | (10) | Y | |
| DIS_JOB_ACCT_CLASS_TYPE | NUMBER | Y | ||
| DIS_JOB_ACCT_CLASS_DESCRIPTION | VARCHAR2 | (240) | ||
| DIS_JOB_COMPLETION_COST_SOURCE | NUMBER | |||
| DIS_JOB_COMP_COST_TYPE_ID | NUMBER | |||
| DIS_JOB_COMPLETION_COST_TYPE | VARCHAR2 | (10) | ||
| DIS_JOB_SYSTEM_OPTION_ID | NUMBER | |||
| DIS_JOB_ACCT_CLASS_ATTR_CAT | VARCHAR2 | (30) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| DIS_JOB_ACCT_CLASS_ATTRIBUTE15 | VARCHAR2 | (150) | ||
| DIS_JOB_PARENT_WIP_ENTITY_ID | NUMBER | |||
| DIS_JOB_PARENT_WIP_ENTITY | VARCHAR2 | (240) | ||
| DIS_JOB_ASSET_NUMBER | VARCHAR2 | (30) | ||
| DIS_JOB_ASSET_GROUP_ID | NUMBER | |||
| DIS_JOB_REBUILD_ITEM_ID | NUMBER | |||
| DIS_JOB_REBUILD_SERIAL_NUMBER | VARCHAR2 | (30) | ||
| DIS_JOB_WORK_ORDER_TYPE | VARCHAR2 | (30) | ||
| DIS_JOB_OWNING_DEPARTMENT | NUMBER | |||
| DIS_JOB_OWN_DEPT_MAINT_CST_CAT | VARCHAR2 | (30) | ||
| DIS_JOB_ACTIVITY_TYPE | VARCHAR2 | (30) | ||
| DIS_JOB_ACTIVITY_CAUSE | VARCHAR2 | (30) | ||
| DIS_JOB_ACTIVITY_SOURCE | VARCHAR2 | (30) | ||
| DIS_JOB_PLANNED_MAINTENANCE | VARCHAR2 | (1) | ||
| DIS_JOB_MAINT_OBJECT_ID | NUMBER | |||
| DIS_JOB_MAINT_OBJECT_TYPE | NUMBER | |||
| DIS_JOB_MAINT_OBJECT_SOURCE | NUMBER | |||
| DIS_JOB_EAM_LINEAR_LOCATION_ID | NUMBER | |||
| DIS_JOB_BRIDGING_ACCT | NUMBER | |||
| DIS_JOB_MATERIAL_ACCT | NUMBER | |||
| DIS_JOB_MAT_OVH_ACCT | NUMBER | |||
| DIS_JOB_OUT_PROC_ACCT | NUMBER | |||
| DIS_JOB_OVERHEAD_ACCT | NUMBER | |||
| DIS_JOB_RESOURCE_ACCT | NUMBER | |||
| DIS_JOB_EXPENSE_ACCT | NUMBER |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| FLO_SCH_WIP_ENTITY_ID | NUMBER | Y | ||
| FLO_SCH_STATUS | NUMBER | Y | ||
| FLO_SCH_NUMBER | VARCHAR2 | (30) | Y | |
| FLO_SCH_SCHEDULED_FLAG | VARCHAR2 | (1) | ||
| FLO_SCH_DEMAND_CLASS | VARCHAR2 | (30) | ||
| FLO_SCH_SCHED_START_DATE | DATE | Y | ||
| FLO_SCH_SCHED_COMP_DATE | DATE | Y | ||
| FLO_SCH_CLOSE_DATE | DATE | |||
| FLO_SCH_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| FLO_SCH_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| FLO_SCH_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| FLO_SCH_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| FLO_SCH_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| FLO_SCH_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| FLO_SCH_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| FLO_SCH_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| FLO_SCH_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| FLO_SCH_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| FLO_SCH_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| FLO_SCH_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| FLO_SCH_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| FLO_SCH_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| FLO_SCH_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| FLO_SCH_ATTRIBUTE15 | VARCHAR2 | (150) | ||
| FLO_SCH_BOM_REVISION | VARCHAR2 | (3) | ||
| FLO_SCH_ROUTING_REVISION | VARCHAR2 | (3) | ||
| FLO_SCH_ACCT_CLASS | VARCHAR2 | (10) | Y | |
| FLO_SCH_LINE_ID | NUMBER | |||
| FLO_SCH_PROJECT_ID | NUMBER | |||
| FLO_SCH_TASK_ID | NUMBER | |||
| FLO_SCH_ACCT_CLASS_TYPE | NUMBER | Y | ||
| FLO_SCH_ACCT_CLASS_DESCRIPTION | VARCHAR2 | (240) | ||
| FLO_SCH_COMPLETION_COST_SOURCE | NUMBER | |||
| FLO_SCH_COMP_COST_TYPE_ID | NUMBER | |||
| FLO_SCH_COMPLETION_COST_TYPE | VARCHAR2 | (10) | ||
| FLO_SCH_SYSTEM_OPTION_ID | NUMBER | |||
| FLO_SCH_ACCT_CLASS_ATTR_CAT | VARCHAR2 | (30) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| FLO_SCH_ACCT_CLASS_ATTRIBUTE15 | VARCHAR2 | (150) | ||
| FLO_SCH_BRIDGING_ACCT | NUMBER | |||
| FLO_SCH_MATERIAL_ACCT | NUMBER | |||
| FLO_SCH_MAT_OVHD_ACCT | NUMBER | |||
| FLO_SCH_OUT_PROC_ACCT | NUMBER | |||
| FLO_SCH_OVERHEAD_ACCT | NUMBER | |||
| FLO_SCH_RESOURCE_ACCT | NUMBER |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EMPLOYEE_ID | NUMBER | (10) | Y | |
| EMPLOYEE_NUM | VARCHAR2 | (30) | ||
| EMP_FULL_NAME | VARCHAR2 | (240) | ||
| EMP_FIRST_NAME | VARCHAR2 | (150) | ||
| EMP_LAST_NAME | VARCHAR2 | (150) | Y | |
| EMP_MIDDLE_NAME | VARCHAR2 | (60) | ||
| EMP_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| EMP_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| EMP_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| EMP_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| EMP_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| EMP_ATTRIBUTE5 | VARCHAR2 | (150) |
APPS.CST_XLA_HR_EMPLOYEE_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| HR_ORGANIZATION_ID | NUMBER | (15) | Y | System-generated primary key column. |
| BUSINESS_GROUP_ID | NUMBER | (15) | Y | Foreign key to HR_ORGANIZATION_UNITS. |
| ORG_LOCATION_ID | NUMBER | (15) | Foreign key to HR_LOCATIONS. Default work site location for all assignments to this organization. | |
| ORG_TYPE | VARCHAR2 | (30) | User-defined organization types, for example Region, Division, Department. | |
| ORG_HR_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column. | |
| ORG_HR_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE16 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE17 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE18 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE19 | VARCHAR2 | (150) | Descriptive flexfield column. | |
| ORG_HR_ATTRIBUTE20 | VARCHAR2 | (150) | Descriptive flexfield column. |
APPS.CST_XLA_HR_ORG_PARAMS_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| FROM_ORGANIZATION_ID | NUMBER | Y | Shipping organization identifier | |
| TO_ORGANIZATION_ID | NUMBER | Y | Receiving organization identifier | |
| INTERORG_TXFR_DEBIT_ACCOUNT | NUMBER | Inter-organization transfer debit account | ||
| INTERORG_TXFR_CREDIT_ACCOUNT | NUMBER | Inter-organization transfer credit account | ||
| INTERORG_RECEIVABLES_ACCOUNT | NUMBER | Inter-organization receivables account | ||
| INTERORG_PAYABLES_ACCOUNT | NUMBER | Inter-organization payables account | ||
| INTERORG_PRICE_VAR_ACCOUNT | NUMBER | Inter-organization price variance account | ||
| PROFIT_IN_INV_ACCOUNT | NUMBER | Inter-organization profit in inventory account | ||
| INTERORG_PROFIT_ACCOUNT | NUMBER | Interorg Profit Account | ||
| INTERORG_BRIDGING_ACCOUNT | NUMBER | Inter Organization Bridging Account | ||
| INTERORG_EXPENSE_ACCOUNT | NUMBER | Inter Organization Expense Account | ||
| INTERORG_REVENUE_ACCOUNT | NUMBER | Inter Organization Revenue Account | ||
| EVENT_ID | NUMBER | (15) | XLA Event ID |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| CATEGORY_ID | NUMBER | Y | ||
| CATEGORY_ITEM_ID | NUMBER | Y | ||
| CATEGORY_ORGANIZATION_ID | NUMBER | Y | ||
| ITEM_CATEGORY_ATTR_CATEGORY | VARCHAR2 | (30) | ||
| ITEM_CATEGORY_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_ATTRIBUTE15 | VARCHAR2 | (150) | ||
| ITEM_CATEGORY_SEGMENT1 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT2 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT3 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT4 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT5 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT6 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT7 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT8 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT9 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT10 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT11 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT12 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT13 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT14 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT15 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT16 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT17 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT18 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT19 | VARCHAR2 | (40) | ||
| ITEM_CATEGORY_SEGMENT20 | VARCHAR2 | (40) |
APPS.CST_XLA_INV_CATEGORY_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_NAME | VARCHAR2 | (40) | ||
| PRIMARY_QUANTITY | NUMBER | Y | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| COST_GROUP | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| TRANSACTION_TYPE | VARCHAR2 | (80) | Y | |
| COST_UPDATE | VARCHAR2 | (240) | ||
| TRANSACTION_DATE | DATE | Y | ||
| REASON_NAME | VARCHAR2 | (30) | ||
| TRANSACTION_REFERENCE | VARCHAR2 | (240) | ||
| TRANSACTION_ID | NUMBER | Y | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y |
APPS.CST_XLA_INV_CU_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| DISPOSITION_ID | NUMBER | Y | User- defined account alias ID | |
| ORGANIZATION_ID | NUMBER | Y | User- defined account alias Organization ID | |
| DISTRIBUTION_ACCOUNT | NUMBER | Y | User- defined account alias Distribution account |
APPS.CST_XLA_INV_DISPOSITIONS_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EVENT_ID | NUMBER | (15) | ||
| H_LEDGER_ID | NUMBER | (15) | Y | |
| DISTRIBUTION_TYPE | CHAR | (24) | ||
| TRANSACTION_ID | NUMBER | Y | ||
| TRANSACTION_TYPE_ID | NUMBER | |||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | |||
| TRANSACTION_ACTION_ID | NUMBER | |||
| PRIMARY_QUANTITY | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | (15) | ||
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| REVISION | VARCHAR2 | (3) | ||
| TRANSFER_ORGANIZATION_ID | NUMBER | |||
| H_COST_GROUP_ID | NUMBER | |||
| H_TRANSFER_COST_GROUP_ID | NUMBER | |||
| H_SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| H_TRANSFER_SUBINVENTORY | VARCHAR2 | (10) | ||
| H_LOCATOR_ID | NUMBER | |||
| H_TRANSFER_LOCATOR_ID | NUMBER | |||
| TRANSACTION_DATE | DATE | Y | ||
| H_PROJECT_ID | NUMBER | |||
| H_TASK_ID | NUMBER | |||
| H_TO_TASK_ID | NUMBER | |||
| H_TO_PROJECT_ID | NUMBER | |||
| SOURCE_PROJECT_ID | NUMBER | |||
| SOURCE_TASK_ID | NUMBER | |||
| ORGANIZATION_TYPE | NUMBER | |||
| TRANSFER_ORGANIZATION_TYPE | NUMBER | |||
| OWNING_ORGANIZATION_ID | NUMBER | |||
| XFR_OWNING_ORGANIZATION_ID | NUMBER | |||
| OWNING_TP_TYPE | NUMBER | |||
| TRANSFER_OWNING_TP_TYPE | NUMBER | |||
| PLANNING_ORGANIZATION_ID | NUMBER | |||
| XFR_PLANNING_ORGANIZATION_ID | NUMBER | |||
| PLANNING_TP_TYPE | NUMBER | |||
| TRANSFER_PLANNING_TP_TYPE | NUMBER | |||
| TRANSFER_TO_GL_INDICATOR | VARCHAR2 | (1) | ||
| H_SUBINV_CG | VARCHAR2 | (40) | ||
| H_TRF_SUBINV_CG | VARCHAR2 | (40) |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_NAME | VARCHAR2 | (40) | ||
| PRIMARY_QUANTITY | NUMBER | Y | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| COST_GROUP | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| TRANSACTION_TYPE | VARCHAR2 | (80) | Y | |
| TRANSACTION_SOURCE_ID | NUMBER | |||
| TRANSACTION_DATE | DATE | Y | ||
| REASON_NAME | VARCHAR2 | (30) | ||
| TRANSACTION_REFERENCE | VARCHAR2 | (240) | ||
| TRANSACTION_ID | NUMBER | Y | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | Y |
APPS.CST_XLA_INV_INTRAORG_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_LOCATION_ID | NUMBER | Y | Inventory locator identifier | |
| LOCATOR_ORGANIZATION_ID | NUMBER | Y | Organization identifier | |
| LOCATOR_SEGMENT1 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT2 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT3 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT4 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT5 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT6 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT7 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT8 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT9 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT10 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT11 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT12 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT13 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT14 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT15 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT16 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT17 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT18 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT19 | VARCHAR2 | (40) | Key flexfield segment | |
| LOCATOR_SEGMENT20 | VARCHAR2 | (40) | Key flexfield segment |
APPS.CST_XLA_INV_ITEM_LOCS_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_INVENTORY_ITEM_ID | NUMBER | Y | ||
| ITEM_ORGANIZATION_ID | NUMBER | Y | ||
| REVISION_ID | NUMBER | Y | ||
| ITEM_REVISION | VARCHAR2 | (3) | Y | |
| REVISION_LABEL | VARCHAR2 | (80) | ||
| REVISION_REASON | VARCHAR2 | (30) |
APPS.CST_XLA_INV_ITEM_REVS_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EVENT_ID | NUMBER | (15) | ||
| LINE_NUMBER | NUMBER | |||
| CODE_COMBINATION_ID | NUMBER | Y | ||
| ENTERED_AMOUNT | NUMBER | |||
| ACCOUNTING_LINE_TYPE_CODE | NUMBER | Y | ||
| ACCOUNTED_AMOUNT | NUMBER | Y | ||
| RATE_OR_AMOUNT | NUMBER | |||
| INV_TXN_BASIS_TYPE | NUMBER | |||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| MATERIAL_OVERHEAD_ID | NUMBER | |||
| COST_ELEMENT_ID | NUMBER | |||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| TRANSFER_SUBINVENTORY | VARCHAR2 | (10) | ||
| LOCATOR_ID | NUMBER | |||
| TRANSFER_LOCATOR_ID | NUMBER | |||
| COST_GROUP_ID | NUMBER | |||
| TRANSFER_COST_GROUP_ID | NUMBER | |||
| TO_PROJECT_ID | NUMBER | |||
| PROJECT_ID | NUMBER | |||
| TO_TASK_ID | NUMBER | |||
| TASK_ID | NUMBER | |||
| LEDGER_ID | NUMBER | (15) | Y | |
| L_ORGANIZATION_ID | NUMBER | (15) | ||
| DISTRIBUTION_IDENTIFIER | NUMBER | |||
| TRANSACTION_ID | NUMBER | |||
| L_ORGANIZATION_CODE | VARCHAR2 | (3) |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INV_ORGANIZATION_ID | NUMBER | Y | ||
| MASTER_ORGANIZATION_ID | NUMBER | Y | ||
| PRIMARY_COST_METHOD | NUMBER | Y | ||
| COST_ORGANIZATION_ID | NUMBER | Y | ||
| MAINT_ORGANIZATION_ID | NUMBER | |||
| PROJECT_REFERENCE_ENABLED | VARCHAR2 | (1) | ||
| PM_COST_COLLECTION_ENABLED | VARCHAR2 | (1) | ||
| PROJECT_CONTROL_LEVEL | NUMBER | |||
| AVG_RATES_COST_TYPE_ID | NUMBER | |||
| AVG_RATES_COST_TYPE | VARCHAR2 | (10) | ||
| BOM_SNAPSHOT_FLAG | VARCHAR2 | (1) | ||
| ALLOW_UPDATES_FLAG | VARCHAR2 | (1) | ||
| AVAILABLE_TO_ENG_FLAG | VARCHAR2 | (1) | ||
| PROCESS_ENABLED_FLAG | VARCHAR2 | (1) | ||
| WSM_ENABLED_FLAG | VARCHAR2 | (1) | ||
| WMS_ENABLED_FLAG | VARCHAR2 | (1) | ||
| EAM_ENABLED_FLAG | VARCHAR2 | (1) | ||
| CONSIGNED_ORG_FLAG | VARCHAR2 | (1) | ||
| WCS_ENABLED | VARCHAR2 | (1) | ||
| DEFER_LOGICAL_TRANSACTIONS | VARCHAR2 | (1) | ||
| COST_GROUP_ACCOUNTING | VARCHAR2 | (1) | ||
| COST_CUTOFF_DATE | DATE | |||
| ENCUMBRANCE_REVERSAL_FLAG | VARCHAR2 | (1) | ||
| ORG_INV_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| ORG_INV_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ORG_INV_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ORG_INV_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ORG_INV_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ORG_INV_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ORG_INV_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ORG_INV_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ORG_INV_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ORG_INV_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ORG_INV_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ORG_INV_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ORG_INV_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ORG_INV_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ORG_INV_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ORG_INV_ATTRIBUTE15 | VARCHAR2 | (150) | ||
| INV_ORG_AVG_COST_VAR_ACCT | NUMBER | |||
| INV_ORG_PUR_PRICE_VAR_ACCT | NUMBER | |||
| INV_ORG_EXPENSE_ACCT | NUMBER |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_NAME | VARCHAR2 | (40) | ||
| PRIMARY_QUANTITY | NUMBER | Y | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| COST_GROUP | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| TRANSACTION_TYPE | VARCHAR2 | (80) | Y | |
| PO_NUMBER | VARCHAR2 | (20) | Y | |
| TRANSACTION_DATE | DATE | Y | ||
| REASON_NAME | VARCHAR2 | (30) | ||
| TRANSACTION_REFERENCE | VARCHAR2 | (240) | ||
| TRANSACTION_ID | NUMBER | Y | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y |
APPS.CST_XLA_INV_PO_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_NAME | VARCHAR2 | (40) | ||
| PRIMARY_QUANTITY | NUMBER | |||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| COST_GROUP | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| TRANSACTION_TYPE | VARCHAR2 | (80) | Y | |
| TRANSACTION_DATE | DATE | Y | ||
| REASON_NAME | VARCHAR2 | (30) | ||
| TRANSACTION_REFERENCE | VARCHAR2 | (240) | ||
| TRANSACTION_ID | NUMBER | Y | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER |
APPS.CST_XLA_INV_RCPT_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| REF_TRANSACTION_ID | NUMBER | Y | Transaction identifier | |
| TRANSACTION_QUANTITY | NUMBER | Y | Transaction quantity | |
| TRANSACTION_UOM | VARCHAR2 | (3) | Y | Transaction unit of measure |
| TRANSACTION_SOURCE_ID | NUMBER | Transaction source identifier | ||
| TRANSACTION_SOURCE_NAME | VARCHAR2 | (80) | Transaction source identfier | |
| TRANSACTION_REFERENCE | VARCHAR2 | (240) | Transaction reference code | |
| REASON_ID | NUMBER | Transaction reason identifier | ||
| ENCUMBRANCE_AMOUNT | NUMBER | Total encumbrance amount | ||
| PPV_VARIANCE_AMOUNT | NUMBER | Used for average cost update transactions | ||
| DEPARTMENT_ID | NUMBER | Department identifier | ||
| OPERATION_SEQ_NUM | NUMBER | Operation sequence number within a routing | ||
| TRX_SOURCE_LINE_ID | NUMBER | Line level transaction source id | ||
| PHYSICAL_ADJUSTMENT_ID | NUMBER | Physical adjustment identifier | ||
| CYCLE_COUNT_ID | NUMBER | Cycle count identifier | ||
| TRANSFER_TRANSACTION_ID | NUMBER | Transaction id of the opposing transfer transaction | ||
| RCV_TRANSACTION_ID | NUMBER | Receiving transaction cross reference | ||
| MOVE_TRANSACTION_ID | NUMBER | Move transaction cross reference | ||
| COMPLETION_TRANSACTION_ID | NUMBER | Completion transaction cross reference | ||
| SHIPMENT_NUMBER | VARCHAR2 | (30) | Intransit shipment identifier | |
| TRANSFER_COST | NUMBER | Transfer cost specified for inter-org transfers | ||
| TRANSPORTATION_COST | NUMBER | Transfer transportation cost | ||
| WAYBILL_AIRBILL | VARCHAR2 | (20) | Airbill / waybill number | |
| FREIGHT_CODE | VARCHAR2 | (30) | Intransit shipment freight code | |
| TRANSACTION_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| TRANSACTION_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| TRANSACTION_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| TRANSACTION_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| TRANSACTION_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| TRANSACTION_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| TRANSACTION_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| TRANSACTION_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| TRANSACTION_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| TRANSACTION_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| TRANSACTION_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| TRANSACTION_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| TRANSACTION_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| TRANSACTION_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| TRANSACTION_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| PA_EXPENDITURE_ORG_ID | NUMBER | Oracle Projects related expenditure organization identifier | ||
| EXPENDITURE_TYPE | VARCHAR2 | (30) | Oracle Projects related expenditure type | |
| FINAL_COMPLETION_FLAG | VARCHAR2 | (1) | ||
| TRANSFER_PERCENTAGE | NUMBER | |||
| PICK_SLIP_NUMBER | NUMBER | |||
| FOB_POINT | NUMBER | |||
| PARENT_TRANSACTION_ID | NUMBER | |||
| LOGICAL_TRX_TYPE_CODE | NUMBER | |||
| LOGICAL_TRANSACTION | VARCHAR2 | (1) | ||
| INTERCOMPANY_PRICING_OPTION | NUMBER | |||
| COGS_RECOG_PERCENT_CHANGE | NUMBER | |||
| COGS_PERCENTAGE | NUMBER | |||
| ENCUMBRANCE_REVERSAL_AMOUNT | NUMBER | |||
| ENCUM_REVERSAL_AMOUNT_ENTERED | NUMBER | |||
| TXN_SHIPMENT_HEADER_ID | NUMBER | |||
| TXN_SHIPMENT_LINE_ID | NUMBER | |||
| APPLIED_TO_APPL_ID | NUMBER | |||
| APPLIED_TO_ENTITY_CODE | VARCHAR2 | (14) | ||
| APPLIED_TO_DIST_LINK_TYPE | CHAR | (20) | ||
| TXN_PO_HEADER_ID | NUMBER | |||
| TXN_PO_DISTRIBUTION_ID | NUMBER | |||
| BUS_FLOW_REQ_ENTITY_CODE | CHAR | (11) | ||
| BUS_FLOW_REQ_DIST_TYPE | CHAR | (24) | ||
| BUS_FLOW_REQ_DIST_ID | NUMBER | |||
| BUS_FLOW_REQ_ID | NUMBER | |||
| PERCENTAGE_CHANGE | NUMBER | |||
| VALUE_CHANGE | NUMBER | |||
| REPETITIVE_LINE_ID | NUMBER | |||
| APPLIED_TO_PO_DOC_ID | NUMBER | |||
| INV_TXN_DISTRIBUTION_ACCT | NUMBER | |||
| INV_TXN_TRANSPO_DIST_ACCT | NUMBER | |||
| INV_TXN_EXPENSE_ACCT | NUMBER | |||
| INV_TXN_MATERIAL_ACCT | NUMBER | |||
| INV_TXN_MAT_OVHD_ACCT | NUMBER | |||
| INV_TXN_OUT_PROC_ACCT | NUMBER | |||
| INV_TXN_OVERHEAD_ACCT | NUMBER | |||
| INV_TXN_RESOURCE_ACCT | NUMBER |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_NAME | VARCHAR2 | (40) | ||
| PRIMARY_QUANTITY | NUMBER | Y | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| COST_GROUP | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| TRANSACTION_TYPE | VARCHAR2 | (80) | Y | |
| REQ_NUMBER | VARCHAR2 | (50) | ||
| TRANSACTION_DATE | DATE | Y | ||
| REASON_NAME | VARCHAR2 | (30) | ||
| TRANSACTION_REFERENCE | VARCHAR2 | (240) | ||
| TRANSACTION_ID | NUMBER | Y | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y |
APPS.CST_XLA_INV_REQ_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SUBINVENTORY | VARCHAR2 | (10) | Y | |
| SUBINV_ORGANIZATION_ID | NUMBER | Y | ||
| LOCATOR_TYPE | NUMBER | |||
| ASSET_INVENTORY | VARCHAR2 | (1) | ||
| SUBINVENTORY_TYPE | NUMBER |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_NAME | VARCHAR2 | (40) | ||
| PRIMARY_QUANTITY | NUMBER | Y | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| COST_GROUP | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| TRANSACTION_TYPE | VARCHAR2 | (80) | Y | |
| SO_NUMBER | VARCHAR2 | (122) | ||
| TRANSACTION_DATE | DATE | Y | ||
| REASON_NAME | VARCHAR2 | (30) | ||
| TRANSACTION_REFERENCE | VARCHAR2 | (240) | ||
| TRANSACTION_ID | NUMBER | Y | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y |
APPS.CST_XLA_INV_SO_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INVENTORY_ITEM_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y | ||
| ITEM_CONCATENATED_SEGMENTS | VARCHAR2 | (40) | ||
| ITEM_DESCRIPTION | VARCHAR2 | (240) | ||
| PURCHASING_ITEM_FLAG | VARCHAR2 | (1) | Y | |
| SHIPPABLE_ITEM_FLAG | VARCHAR2 | (1) | Y | |
| CUSTOMER_ORDER_FLAG | VARCHAR2 | (1) | Y | |
| INTERNAL_ORDER_FLAG | VARCHAR2 | (1) | Y | |
| SERVICE_ITEM_FLAG | VARCHAR2 | (1) | Y | |
| INVENTORY_ITEM_FLAG | VARCHAR2 | (1) | Y | |
| ENG_ITEM_FLAG | VARCHAR2 | (1) | Y | |
| INVENTORY_ASSET_FLAG | NUMBER | Y | ||
| PURCHASING_ENABLED_FLAG | VARCHAR2 | (1) | Y | |
| CUSTOMER_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | Y | |
| INTERNAL_ORDER_ENABLED_FLAG | VARCHAR2 | (1) | Y | |
| SO_TRANSACTIONS_FLAG | VARCHAR2 | (1) | Y | |
| MTL_TRANSACTIONS_ENABLED_FLAG | VARCHAR2 | (1) | Y | |
| STOCK_ENABLED_FLAG | VARCHAR2 | (1) | Y | |
| BOM_ENABLED_FLAG | VARCHAR2 | (1) | Y | |
| BUILD_IN_WIP_FLAG | VARCHAR2 | (1) | Y | |
| CATALOG_STATUS_FLAG | VARCHAR2 | (1) | ||
| RETURNABLE_FLAG | VARCHAR2 | (1) | ||
| COLLATERAL_FLAG | VARCHAR2 | (1) | ||
| TAXABLE_FLAG | VARCHAR2 | (1) | ||
| INSPECTION_REQUIRED_FLAG | VARCHAR2 | (1) | ||
| RECEIPT_REQUIRED_FLAG | VARCHAR2 | (1) | ||
| RFQ_REQUIRED_FLAG | VARCHAR2 | (1) | ||
| ALLOW_SUBSTITUTE_RECEIPTS_FLAG | VARCHAR2 | (1) | ||
| ALLOW_UNORDERED_RECEIPTS_FLAG | VARCHAR2 | (1) | ||
| ALLOW_EXPRESS_DELIVERY_FLAG | VARCHAR2 | (1) | ||
| SOURCE_TYPE | NUMBER | |||
| SOURCE_ORGANIZATION_ID | NUMBER | |||
| SOURCE_SUBINVENTORY | VARCHAR2 | (10) | ||
| MRP_CALCULATE_ATP_FLAG | VARCHAR2 | (1) | ||
| REPETITIVE_PLANNING_FLAG | VARCHAR2 | (1) | ||
| BOM_ITEM_TYPE | NUMBER | Y | ||
| PICK_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | |
| ATP_COMPONENTS_FLAG | VARCHAR2 | (1) | Y | |
| ATP_FLAG | VARCHAR2 | (1) | Y | |
| WIP_SUPPLY_TYPE | NUMBER | |||
| WIP_SUPPLY_SUBINVENTORY | VARCHAR2 | (10) | ||
| PRIMARY_UOM_CODE | VARCHAR2 | (3) | ||
| DEFAULT_INCLUDE_IN_ROLLUP_FLAG | VARCHAR2 | (1) | ||
| INVENTORY_PLANNING_CODE | NUMBER | |||
| PLANNING_MAKE_BUY_CODE | NUMBER | |||
| RESERVABLE_TYPE | VARCHAR2 | (1) | ||
| VENDOR_WARRANTY_FLAG | VARCHAR2 | (1) | Y | |
| SERVICEABLE_COMPONENT_FLAG | VARCHAR2 | (1) | ||
| SERVICEABLE_PRODUCT_FLAG | VARCHAR2 | (1) | Y | |
| PREVENTIVE_MAINTENANCE_FLAG | VARCHAR2 | (1) | ||
| TIME_BILLABLE_FLAG | VARCHAR2 | (1) | ||
| MATERIAL_BILLABLE_FLAG | VARCHAR2 | (30) | ||
| EXPENSE_BILLABLE_FLAG | VARCHAR2 | (1) | ||
| PRORATE_SERVICE_FLAG | VARCHAR2 | (1) | ||
| INVOICEABLE_ITEM_FLAG | VARCHAR2 | (1) | Y | |
| INVOICE_ENABLED_FLAG | VARCHAR2 | (1) | Y | |
| OUTSIDE_OPERATION_FLAG | VARCHAR2 | (1) | Y | |
| COSTING_ENABLED_FLAG | VARCHAR2 | (1) | Y | |
| AUTO_CREATED_CONFIG_FLAG | VARCHAR2 | (1) | Y | |
| CYCLE_COUNT_ENABLED_FLAG | VARCHAR2 | (1) | Y | |
| ITEM_TYPE | VARCHAR2 | (30) | ||
| SHIP_MODEL_COMPLETE_FLAG | VARCHAR2 | (1) | ||
| MRP_PLANNING_CODE | NUMBER | |||
| RETURN_INSPECTION_REQUIREMENT | VARCHAR2 | (1) | ||
| ATO_FORECAST_CONTROL | NUMBER | |||
| CONTAINER_ITEM_FLAG | VARCHAR2 | (1) | ||
| VEHICLE_ITEM_FLAG | VARCHAR2 | (1) | ||
| CONTAINER_TYPE_CODE | VARCHAR2 | (30) | ||
| ITEM_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| ITEM_ATTRIBUTE1 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE2 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE3 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE4 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE5 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE6 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE7 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE8 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE9 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE10 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE11 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE12 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE13 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE14 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE15 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE16 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE17 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE18 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE19 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE20 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE21 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE22 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE23 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE24 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE25 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE26 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE27 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE28 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE29 | VARCHAR2 | (240) | ||
| ITEM_ATTRIBUTE30 | VARCHAR2 | (240) | ||
| ITEM_SEGMENT1 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT2 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT3 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT4 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT5 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT6 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT7 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT8 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT9 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT10 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT11 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT12 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT13 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT14 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT15 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT16 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT17 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT18 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT19 | VARCHAR2 | (40) | ||
| ITEM_SEGMENT20 | VARCHAR2 | (40) | ||
| EQUIPMENT_TYPE | VARCHAR2 | (1) | ||
| DEFECT_TRACKING_ON_FLAG | VARCHAR2 | (1) | ||
| USAGE_ITEM_FLAG | VARCHAR2 | (1) | ||
| EVENT_FLAG | VARCHAR2 | (1) | ||
| ELECTRONIC_FLAG | VARCHAR2 | (1) | ||
| DOWNLOADABLE_FLAG | VARCHAR2 | (1) | ||
| VOL_DISCOUNT_EXEMPT_FLAG | VARCHAR2 | (1) | ||
| COUPON_EXEMPT_FLAG | VARCHAR2 | (1) | ||
| COMMS_NL_TRACKABLE_FLAG | VARCHAR2 | (1) | ||
| ASSET_CREATION_CODE | VARCHAR2 | (30) | ||
| ORDERABLE_ON_WEB_FLAG | VARCHAR2 | (1) | ||
| BACK_ORDERABLE_FLAG | VARCHAR2 | (1) | ||
| INDIVISIBLE_FLAG | VARCHAR2 | (1) | ||
| LOT_STATUS_ENABLED | VARCHAR2 | (1) | ||
| SERIAL_STATUS_ENABLED | VARCHAR2 | (1) | ||
| LOT_SPLIT_ENABLED | VARCHAR2 | (1) | ||
| LOT_MERGE_ENABLED | VARCHAR2 | (1) | ||
| FINANCING_ALLOWED_FLAG | VARCHAR2 | (1) | ||
| EAM_ITEM_TYPE | NUMBER | |||
| EAM_ACTIVITY_TYPE_CODE | VARCHAR2 | (30) | ||
| EAM_ACTIVITY_CAUSE_CODE | VARCHAR2 | (30) | ||
| EAM_ACT_NOTIFICATION_FLAG | VARCHAR2 | (1) | ||
| CONTRACT_ITEM_TYPE_CODE | VARCHAR2 | (30) | ||
| SUBSCRIPTION_DEPEND_FLAG | VARCHAR2 | (1) | ||
| SERV_REQ_ENABLED_CODE | VARCHAR2 | (30) | ||
| SERV_BILLING_ENABLED_FLAG | VARCHAR2 | (1) | ||
| LOT_TRANSLATE_ENABLED | VARCHAR2 | (1) | ||
| IB_ITEM_INSTANCE_CLASS | VARCHAR2 | (30) | ||
| CONFIG_MODEL_TYPE | VARCHAR2 | (30) | ||
| LOT_SUBSTITUTION_ENABLED | VARCHAR2 | (1) | ||
| EAM_ACTIVITY_SOURCE_CODE | VARCHAR2 | (30) | ||
| CONSIGNED_ITEM_FLAG | VARCHAR2 | (1) | ||
| VMI_FORECAST_TYPE | NUMBER | |||
| EXCLUDE_FROM_BUDGET_FLAG | VARCHAR2 | (1) | ||
| CHILD_LOT_FLAG | VARCHAR2 | (1) | ||
| COPY_LOT_ATTRIBUTE_FLAG | VARCHAR2 | (1) | ||
| PROCESS_COSTING_ENABLED_FLAG | VARCHAR2 | (1) | ||
| PROCESS_EXECUTION_ENABLED_FLAG | VARCHAR2 | (1) | ||
| PROCESS_QUALITY_ENABLED_FLAG | VARCHAR2 | (1) | ||
| RECIPE_ENABLED_FLAG | VARCHAR2 | (1) | ||
| BASED_ON_ROLLUP_FLAG | NUMBER | |||
| SHRINKAGE_RATE | NUMBER | |||
| INV_ITEM_EXPENSE_ACCT | NUMBER |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INV_TRANSACTION_SOURCE_TYPE_ID | NUMBER | Y | ||
| TRANSACTION_SOURCE_TYPE_NAME | VARCHAR2 | (30) | Y | |
| SOURCE_TYPE_USER_DEFINED_FLAG | VARCHAR2 | (1) | Y |
APPS.CST_XLA_INV_TXN_SRC_TYPS_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| INV_TRANSACTION_TYPE_ID | NUMBER | Y | Transaction type identifier | |
| TRANSACTION_TYPE_NAME | VARCHAR2 | (80) | Y | Name of the transaction type |
| TXN_TYPE_USER_DEFINED_FLAG | VARCHAR2 | (1) | Y | Set to 'Y' if this type is user-defined |
| TYPE_CLASS | VARCHAR2 | (1) | ||
| INV_TXN_TYPE_DESCRIPTION | VARCHAR2 | (240) |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| UOM_CODE | VARCHAR2 | (3) | Y | |
| BASE_UOM_FLAG | VARCHAR2 | (1) | Y | |
| UNIT_OF_MEASURE_TL | VARCHAR2 | (25) | Y |
APPS.CST_XLA_INV_UOM_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_NAME | VARCHAR2 | (40) | ||
| PRIMARY_QUANTITY | NUMBER | Y | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| COST_GROUP | VARCHAR2 | (10) | Y | |
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| TRANSACTION_TYPE | VARCHAR2 | (80) | Y | |
| TRANSACTION_SOURCE_ID | NUMBER | |||
| TRANSACTION_DATE | DATE | Y | ||
| REASON_NAME | VARCHAR2 | (30) | ||
| TRANSACTION_REFERENCE | VARCHAR2 | (240) | ||
| TRANSACTION_ID | NUMBER | Y | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y |
APPS.CST_XLA_INV_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_NAME | VARCHAR2 | (40) | ||
| PRIMARY_QUANTITY | NUMBER | Y | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| COST_GROUP | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| TRANSACTION_TYPE | VARCHAR2 | (80) | Y | |
| WIP_ENTITY | VARCHAR2 | (240) | Y | |
| TRANSACTION_DATE | DATE | Y | ||
| REASON_NAME | VARCHAR2 | (30) | ||
| TRANSACTION_REFERENCE | VARCHAR2 | (240) | ||
| TRANSACTION_ID | NUMBER | Y | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER | Y |
APPS.CST_XLA_INV_WIP_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_NAME | VARCHAR2 | (40) | ||
| PRIMARY_QUANTITY | NUMBER | |||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| COST_GROUP | VARCHAR2 | (10) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | Organization code | |
| TRANSACTION_TYPE | VARCHAR2 | (80) | Y | |
| TRANSACTION_SOURCE_ID | NUMBER | |||
| TRANSACTION_DATE | DATE | Y | ||
| REASON_NAME | VARCHAR2 | (30) | ||
| TRANSACTION_REFERENCE | VARCHAR2 | (240) | ||
| TRANSACTION_ID | NUMBER | Y | ||
| TRANSACTION_SOURCE_TYPE_ID | NUMBER | Y | ||
| ORGANIZATION_ID | NUMBER |
APPS.CST_XLA_INV_XFR_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| MOVE_TRANSACTION_ID | NUMBER | Y | Transaction Identifier | |
| MOVE_TRANSACTION_DATE | DATE | Y | Date transaction was performed | |
| MOVE_TXN_TXN_QTY | NUMBER | Y | Transaction move quantity | |
| MOVE_TXN_TXN_UOM | VARCHAR2 | (3) | Y | Transaction unit of measure code |
| MOVE_TXN_PRIMARY_QTY | NUMBER | Y | Transaction move quantity in assembly's primary unit of measure | |
| MOVE_TXN_PRIMARY_UOM | VARCHAR2 | (3) | Y | Unit of measure code of the assembly |
| MOVE_TXN_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| MOVE_TXN_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| MOVE_TXN_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| MOVE_TXN_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| MOVE_TXN_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| MOVE_TXN_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| MOVE_TXN_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| MOVE_TXN_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| MOVE_TXN_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| MOVE_TXN_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| MOVE_TXN_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| MOVE_TXN_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| MOVE_TXN_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| MOVE_TXN_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| MOVE_TXN_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| MOVE_TXN_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment |
APPS.CST_XLA_MOVE_TXN_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SALES_ORDER_LINE_ID | NUMBER | Y | ||
| SALES_ORDER_LINE_NUMBER | NUMBER | Y |
APPS.CST_XLA_OE_ORDER_LINES_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| WIP_ENTITY | VARCHAR2 | (240) | Y | |
| ASSEMBLY_NAME | VARCHAR2 | (40) | ||
| RESOURCE_CODE | VARCHAR2 | (10) | ||
| PRIMARY_QUANTITY | NUMBER | |||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | ||
| OPERATION_SEQ_NUM | NUMBER | |||
| TRANSACTION_DATE | DATE | Y | ||
| BASIS_TYPE | VARCHAR2 | (80) | ||
| PO_NUMBER | VARCHAR2 | (20) | ||
| TRANSACTION_ID | NUMBER | Y | ||
| RESOURCE_ID | NUMBER | |||
| BASIS_TYPE_ID | NUMBER |
APPS.CST_XLA_OSP_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PJM_ORGANIZATION_ID | NUMBER | Y | ||
| ALLOW_CROSS_PROJECT_ISSUES | VARCHAR2 | (1) | ||
| PA_POSTING_FLAG | VARCHAR2 | (1) | ||
| PA_AUTO_ACCOUNTING_FLAG | VARCHAR2 | (1) | ||
| WIP_AS_STRAIGHT_TIME_FLAG | VARCHAR2 | (1) | ||
| ORG_PJM_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| ORG_PJM_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ORG_PJM_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ORG_PJM_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ORG_PJM_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ORG_PJM_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ORG_PJM_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ORG_PJM_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ORG_PJM_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ORG_PJM_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ORG_PJM_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ORG_PJM_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ORG_PJM_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ORG_PJM_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ORG_PJM_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ORG_PJM_ATTRIBUTE15 | VARCHAR2 | (150) |
APPS.CST_XLA_PJM_ORG_PARAMS_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| PLA_CATEGORY_ID | NUMBER | Y | Product Line Category ID | |
| PLA_CAT_ITEM_ID | NUMBER | Y | Inventory Item ID | |
| PLA_CAT_ORGANIZATION_ID | NUMBER | Y | Organization ID | |
| PLA_ITEM_CAT_ATTR_CATEGORY | VARCHAR2 | (30) | Item Category attribute Category | |
| PLA_ITEM_CAT_ATTRIBUTE1 | VARCHAR2 | (150) | Item Category attribute1 | |
| PLA_ITEM_CAT_ATTRIBUTE2 | VARCHAR2 | (150) | Item Category attribute2 | |
| PLA_ITEM_CAT_ATTRIBUTE3 | VARCHAR2 | (150) | Item Category attribute3 | |
| PLA_ITEM_CAT_ATTRIBUTE4 | VARCHAR2 | (150) | Item Category attribute4 | |
| PLA_ITEM_CAT_ATTRIBUTE5 | VARCHAR2 | (150) | Item Category attribute5 | |
| PLA_ITEM_CAT_ATTRIBUTE6 | VARCHAR2 | (150) | Item Category attribute6 | |
| PLA_ITEM_CAT_ATTRIBUTE7 | VARCHAR2 | (150) | Item Category attribute7 | |
| PLA_ITEM_CAT_ATTRIBUTE8 | VARCHAR2 | (150) | Item Category attribute8 | |
| PLA_ITEM_CAT_ATTRIBUTE9 | VARCHAR2 | (150) | Item Category attribute9 | |
| PLA_ITEM_CAT_ATTRIBUTE10 | VARCHAR2 | (150) | Item Category attribute10 | |
| PLA_ITEM_CAT_ATTRIBUTE11 | VARCHAR2 | (150) | Item Category attribute11 | |
| PLA_ITEM_CAT_ATTRIBUTE12 | VARCHAR2 | (150) | Item Category attribute12 | |
| PLA_ITEM_CAT_ATTRIBUTE13 | VARCHAR2 | (150) | Item Category attribute13 | |
| PLA_ITEM_CAT_ATTRIBUTE14 | VARCHAR2 | (150) | Item Category attribute14 | |
| PLA_ITEM_CAT_ATTRIBUTE15 | VARCHAR2 | (150) | Item Category attribute15 | |
| PLA_ITEM_CAT_SEGMENT1 | VARCHAR2 | (40) | Item Category segment1 | |
| PLA_ITEM_CAT_SEGMENT2 | VARCHAR2 | (40) | Item Category segment2 | |
| PLA_ITEM_CAT_SEGMENT3 | VARCHAR2 | (40) | Item Category segment3 | |
| PLA_ITEM_CAT_SEGMENT4 | VARCHAR2 | (40) | Item Category segment4 | |
| PLA_ITEM_CAT_SEGMENT5 | VARCHAR2 | (40) | Item Category segment5 | |
| PLA_ITEM_CAT_SEGMENT6 | VARCHAR2 | (40) | Item Category segment6 | |
| PLA_ITEM_CAT_SEGMENT7 | VARCHAR2 | (40) | Item Category segment7 | |
| PLA_ITEM_CAT_SEGMENT8 | VARCHAR2 | (40) | Item Category segment8 | |
| PLA_ITEM_CAT_SEGMENT9 | VARCHAR2 | (40) | Item Category segment9 | |
| PLA_ITEM_CAT_SEGMENT10 | VARCHAR2 | (40) | Item Category segment10 | |
| PLA_ITEM_CAT_SEGMENT11 | VARCHAR2 | (40) | Item Category segment11 | |
| PLA_ITEM_CAT_SEGMENT12 | VARCHAR2 | (40) | Item Category segment12 | |
| PLA_ITEM_CAT_SEGMENT13 | VARCHAR2 | (40) | Item Category segment13 | |
| PLA_ITEM_CAT_SEGMENT14 | VARCHAR2 | (40) | Item Category segment14 | |
| PLA_ITEM_CAT_SEGMENT15 | VARCHAR2 | (40) | Item Category segment15 | |
| PLA_ITEM_CAT_SEGMENT16 | VARCHAR2 | (40) | Item Category segment16 | |
| PLA_ITEM_CAT_SEGMENT17 | VARCHAR2 | (40) | Item Category segment17 | |
| PLA_ITEM_CAT_SEGMENT18 | VARCHAR2 | (40) | Item Category segment18 | |
| PLA_ITEM_CAT_SEGMENT19 | VARCHAR2 | (40) | Item Category segment19 | |
| PLA_ITEM_CAT_SEGMENT20 | VARCHAR2 | (40) | Item Category segment20 | |
| PLA_BRIDGING_ACCOUNT | NUMBER | Product Line Category Bridging Account | ||
| PLA_EXPENSE_ACCOUNT | NUMBER | Product Line Category Expense Account | ||
| PLA_MATERIAL_ACCOUNT | NUMBER | Product Line Category Material Account | ||
| PLA_MATERIAL_OVERHEAD_ACCOUNT | NUMBER | Product Line Category Material Overhead Account | ||
| PLA_OUTSIDE_PROCESSING_ACCOUNT | NUMBER | Product Line Category Outside Processing Account | ||
| PLA_OVERHEAD_ACCOUNT | NUMBER | Product Line Category Overhead Account | ||
| PLA_RESOURCE_ACCOUNT | NUMBER | Product Line Category Resource Account | ||
| PLA_SUBINV_CG | VARCHAR2 | (40) | Product Line Category Subinventory code or Cost Group | |
| PLA_ACV_ACCOUNT | NUMBER | Product Line Category Average Cost Variance Account | ||
| PLA_ENCUMBRANCE_ACCOUNT | NUMBER | Product Line Category Encumbrance Account | ||
| PLA_ANALYTICAL_IPV_ACCT | NUMBER | Product Line Category Invoice Price Variance Account | ||
| PLA_ANALYTICAL_PO_MIRROR_ACCT | NUMBER | Product Line Category PO Mirror Account | ||
| PLA_NON_INVOICED_SO_ACCT | NUMBER | Product Line Category Non Invoiced SO Account | ||
| PLA_NON_INVOICED_REV_ACCT | NUMBER | Product Line Category Non Invoiced Revenue Account | ||
| PLA_ANALYTICAL_REV_MIRROR_ACCT | NUMBER | Product Line Category Non Invoiced Revenue Account | ||
| PLA_ANALYTICAL_MOGS_ACCT | NUMBER | Product Line Category Margin of Good Sold Account |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| LINE_ID | NUMBER | Y | WIP line Identifier | |
| LINE_CODE | VARCHAR2 | (10) | Y | Line name |
| LINE_ORG_ID | NUMBER | Y | Organization Identifier | |
| LINE_DESCRIPTION | VARCHAR2 | (240) | Descriptive text | |
| LINE_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| LINE_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LINE_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LINE_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LINE_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LINE_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LINE_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LINE_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LINE_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LINE_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LINE_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LINE_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LINE_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LINE_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LINE_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| LINE_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment |
APPS.CST_XLA_PROD_LINE_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EVENT_ID | NUMBER | (15) | ||
| DISTRIBUTION_TYPE | CHAR | (24) | ||
| RCV_ACCOUNTING_EVENT_ID | NUMBER | Y | ||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (30) | ||
| TRANSFER_TO_GL_INDICATOR | VARCHAR2 | (1) |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EVENT_ID | NUMBER | (15) | ||
| LINE_NUMBER | NUMBER | |||
| ACCOUNTED_AMOUNT | NUMBER | |||
| ENTERED_AMOUNT | NUMBER | |||
| CODE_COMBINATION_ID | NUMBER | |||
| RCV_ACCOUNTING_LINE_TYPE | VARCHAR2 | (30) | ||
| ENTERED_NR_TAX | NUMBER | |||
| ENTERED_REC_TAX | NUMBER | |||
| ACCOUNTED_NR_TAX | NUMBER | |||
| ACCOUNTED_REC_TAX | NUMBER | |||
| ACCRUAL_METHOD_FLAG | VARCHAR2 | (1) | ||
| LEDGER_ID | NUMBER | (15) | Y | |
| DISTRIBUTION_IDENTIFIER | NUMBER |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| REF_RCV_ACCOUNTING_EVENT_ID | NUMBER | Y | ||
| OPERATING_UNIT_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | |||
| RCV_CONSIGNED_FLAG | VARCHAR2 | (1) | ||
| RCV_LOCATION_ID | NUMBER | |||
| RCV_USER_ENTERED_FLAG | VARCHAR2 | (1) | ||
| RCV_TRANSACTION_TYPE | VARCHAR2 | (25) | ||
| TRANSACTION_DATE | DATE | |||
| RCV_TRANSACTION_ID | NUMBER | |||
| CROSS_OU_FLAG | VARCHAR2 | (1) | ||
| INVENTORY_ITEM_ID | NUMBER | |||
| PO_DISTRIBUTION_ID | NUMBER | |||
| PRIMARY_QUANTITY | NUMBER | |||
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (25) | ||
| TRANSACTION_QUANTITY | NUMBER | |||
| TRANSACTION_UNIT_OF_MEASURE | VARCHAR2 | (25) | ||
| SOURCE_DOC_QUANTITY | NUMBER | |||
| SOURCE_DOC_UNIT_OF_MEASURE | VARCHAR2 | (25) | ||
| INTERCOMPANY_PRICING_OPT_CODE | NUMBER | |||
| RAE_UNIT_PRICE | NUMBER | |||
| RAE_PRIOR_UNIT_PRICE | NUMBER | |||
| RAE_TRANSACTION_AMOUNT | NUMBER | |||
| SHIPMENT_HEADER_ID | NUMBER | |||
| SHIPMENT_LINE_ID | NUMBER | |||
| RECEIPT_EXCEPTION_FLAG | VARCHAR2 | (1) | ||
| SUBSTITUTE_UNORDERED_CODE | VARCHAR2 | (25) | ||
| TRX_FLOW_HEADER_ID | NUMBER | |||
| DROPSHIP_TYPE_CODE | NUMBER | |||
| PARENT_TRANSACTION_ID | NUMBER | |||
| PROCUREMENT_ORG_FLAG | VARCHAR2 | (1) | ||
| CHILD_INSPECTION_FLAG | VARCHAR2 | (1) | ||
| COUNTRY_OF_ORIGIN_CODE | VARCHAR2 | (2) | ||
| CUSTOMER_ID | NUMBER | |||
| CUSTOMER_SITE_ID | NUMBER | |||
| EMPLOYEE_ID | NUMBER | (9) | ||
| INSPECTION_QUALITY_CODE | VARCHAR2 | (25) | ||
| INSPECTION_STATUS_CODE | VARCHAR2 | (25) | ||
| INVOICE_ID | NUMBER | |||
| INVOICE_STATUS_CODE | VARCHAR2 | (25) | ||
| SERVICE_JOB_ID | NUMBER | |||
| MOBILE_TXN | VARCHAR2 | (2) | ||
| MOVEMENT_ID | NUMBER | |||
| OE_ORDER_HEADER_ID | NUMBER | |||
| OE_ORDER_LINE_ID | NUMBER | |||
| QA_COLLECTION_ID | NUMBER | |||
| QC_GRADE | VARCHAR2 | (150) | ||
| REASON_ID | NUMBER | |||
| RMA_REFERENCE | VARCHAR2 | (30) | ||
| VENDOR_ID | NUMBER | |||
| VENDOR_SITE_ID | NUMBER | |||
| VENDOR_LOT_NUM | VARCHAR2 | (30) | ||
| WIP_ENTITY_ID | NUMBER | |||
| REP_SCH_ID | NUMBER | |||
| OPERATION_SEQ_NUM | NUMBER | |||
| RES_SEQ_NUM | NUMBER | |||
| RESOURCE_ID | NUMBER | |||
| PROJECT_ID | NUMBER | |||
| TASK_ID | NUMBER | |||
| ROUTING_HEADER_ID | NUMBER | |||
| DELIVER_TO_LOCATION_ID | NUMBER | |||
| DELIVER_TO_PERSON_ID | NUMBER | (9) | ||
| DESTINATION_CONTEXT | VARCHAR2 | (30) | ||
| SUBINVENTORY_CODE | VARCHAR2 | (10) | ||
| FROM_SUBINVENTORY | VARCHAR2 | (240) | ||
| FROM_LOCATOR_ID | NUMBER | |||
| LOCATOR_ID | NUMBER | |||
| LOCATOR_ATTRIBUTE | VARCHAR2 | (150) | ||
| LPN_ID | NUMBER | |||
| LPN_GROUP_ID | NUMBER | |||
| TIMECARD_ID | NUMBER | |||
| TIMECARD_OVN | NUMBER | |||
| TRANSFER_LPN_ID | NUMBER | |||
| TRANSACTION_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| TRANSACTION_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE15 | VARCHAR2 | (150) | ||
| ENCUMBRANCE_REVERSAL_AMOUNT | NUMBER | |||
| ENCUM_REVERSAL_AMOUNT_ENTERED | NUMBER | |||
| APPLIED_TO_APPL_ID | NUMBER | |||
| APPLIED_TO_ENTITY_CODE | VARCHAR2 | (14) | ||
| APPLIED_TO_DIST_LINK_TYPE | CHAR | (20) | ||
| PO_HEADER_ID | NUMBER | |||
| PO_LINE_ID | NUMBER | |||
| PO_RELEASE_ID | NUMBER | |||
| PO_LINE_LOCATION_ID | NUMBER | |||
| REQUISITION_LINE_ID | NUMBER | |||
| REQ_DISTRIBUTION_ID | NUMBER | |||
| WIP_LINE_ID | NUMBER | |||
| APPLIED_TO_PO_DOC_ID | NUMBER |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_NAME | VARCHAR2 | (40) | ||
| ITEM_DESCRIPTION | VARCHAR2 | (240) | ||
| PO_NUMBER | VARCHAR2 | (20) | Y | |
| RELEASE_NUM | NUMBER | |||
| LINE_NUM | NUMBER | Y | ||
| SHIPMENT_NUM | NUMBER | |||
| DISTRIBUTION_NUM | NUMBER | Y | ||
| RECEIPT_NUM | VARCHAR2 | (30) | ||
| PRIMARY_QUANTITY | NUMBER | |||
| VENDOR_NAME | VARCHAR2 | (240) | ||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| TRANSACTION_DATE | DATE | |||
| RCV_TXN_TYPE | VARCHAR2 | (25) | ||
| TRANSACTION_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | |||
| ACCOUNTING_EVENT_ID | NUMBER | Y | ||
| PRIMARY_UNIT_OF_MEASURE | VARCHAR2 | (25) |
APPS.CST_XLA_RCV_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| REP_ITM_WIP_ENTITY_ID | NUMBER | Y | WIP repetitive assembly Identifier | |
| REP_ITM_LINE_ID | NUMBER | Y | WIP line Identifier | |
| REP_ITM_SUPPLY_TYPE | NUMBER | Y | Method of material consumption within WIP | |
| REP_ITM_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| REP_ITM_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS | VARCHAR2 | (10) | Y | Accounting class associated with the repetitive item |
| REP_ITM_ACCT_CLASS_TYPE | NUMBER | Y | Accounting class type code | |
| REP_ITM_ACCT_CLASS_DESCRIPTION | VARCHAR2 | (240) | Description of the Account | |
| REP_ITM_COMPLETION_COST_SOURCE | NUMBER | Completion cost source of the accounting class for average costing | ||
| REP_ITM_COMP_COST_TYPE_ID | NUMBER | Cost type Identifier for average costing | ||
| REP_ITM_COMPLETION_COST_TYPE | VARCHAR2 | (10) | Cost type name | |
| REP_ITM_SYSTEM_OPTION_ID | NUMBER | System option Identifier | ||
| REP_ITM_ACCT_CLASS_ATTR_CAT | VARCHAR2 | (30) | Descriptive Flexfield structure defining column | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_ACCT_CLASS_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive Flexfield segment | |
| REP_ITM_BRIDGING_ACCT | NUMBER | Bridging account |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_ID | NUMBER | Y | Repetitive WIP transaction Identifier | |
| REPETITIVE_SCHEDULE_ID | NUMBER | Y | WIP repetitive schedule Identifier | |
| REP_SCHED_WIP_ENTITY_ID | NUMBER | Y | Repetitive WIP Entity ID | |
| REP_SCHED_LINE_ID | NUMBER | Y | Repetitive Scheduled Line ID | |
| REP_SCHED_MATERIAL_ACCOUNT | NUMBER | Y | General Ledger account to accumulate material charges for a repetitive schedule | |
| REP_SCHED_MAT_OVHD_ACCOUNT | NUMBER | Y | General Ledger account to accumulate material overhead charges for a repetitive schedule | |
| REP_SCHED_OUT_PROC_ACCOUNT | NUMBER | Y | General Ledger account to accumulate outside processing charges for a repetitive schedule | |
| REP_SCHED_OVERHEAD_ACCOUNT | NUMBER | Y | General Ledger account to accumulate overhead charges for a repetitive schedule | |
| REP_SCHED_RESOURCE_ACCOUNT | NUMBER | Y | General Ledger account to accumulate resource charges for a repetitive schedule |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RESOURCE_ID | NUMBER | Y | Resource unique identifier | |
| RESOURCE_CODE | VARCHAR2 | (10) | Y | Resource code |
| RES_DESCRIPTION | VARCHAR2 | (240) | Description | |
| RES_COST_ELEMENT | VARCHAR2 | (50) | Y | Cost element name |
| RES_PURCHASE_ITEM_ID | NUMBER | Purchase item identifier | ||
| RES_FUNC_CURRENCY_FLAG | NUMBER | Y | Unit of measure is functional currency | |
| RES_TYPE | NUMBER | Resource type | ||
| RES_EXPENDITURE_TYPE | VARCHAR2 | (30) | Expenditure type | |
| RES_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield structure defining column | |
| RES_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| RES_OVH_ABSORPTION_ACCT | NUMBER | Absorption account |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SHIPMENT_HEADER_ID | NUMBER | Y | Receipt header unique identifier | |
| SHIP_HEADER_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_HEADER_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
APPS.CST_XLA_SHIP_HEADERS_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| SHIPMENT_LINE_ID | NUMBER | Y | Shipment line unique identifier | |
| SHIP_LINE_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE1 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE2 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE3 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE4 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE5 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE6 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE7 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE8 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE9 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE10 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE11 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE12 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE13 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE14 | VARCHAR2 | (150) | Descriptive flexfield segment | |
| SHIP_LINE_ATTRIBUTE15 | VARCHAR2 | (150) | Descriptive flexfield segment |
APPS.CST_XLA_SHIP_LINES_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRF_PLA_CATEGORY_ID | NUMBER | Y | ||
| TRF_PLA_CAT_ITEM_ID | NUMBER | Y | ||
| TRF_PLA_CAT_ORGANIZATION_ID | NUMBER | Y | ||
| TRF_PLA_ITEM_CAT_ATTR_CATEGORY | VARCHAR2 | (30) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_ATTRIBUTE15 | VARCHAR2 | (150) | ||
| TRF_PLA_ITEM_CAT_SEGMENT1 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT2 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT3 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT4 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT5 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT6 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT7 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT8 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT9 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT10 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT11 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT12 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT13 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT14 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT15 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT16 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT17 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT18 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT19 | VARCHAR2 | (40) | ||
| TRF_PLA_ITEM_CAT_SEGMENT20 | VARCHAR2 | (40) | ||
| TRF_PLA_BRIDGING_ACCT | NUMBER | |||
| TRF_PLA_EXPENSE_ACCT | NUMBER | |||
| TRF_PLA_MATERIAL_ACCT | NUMBER | |||
| TRF_PLA_MATERIAL_OVERHEAD_ACCT | NUMBER | |||
| TRF_PLA_OUTSIDE_PROCESS_ACCT | NUMBER | |||
| TRF_PLA_OVERHEAD_ACCT | NUMBER | |||
| TRF_PLA_RESOURCE_ACCT | NUMBER | |||
| TRF_PLA_SUBINV_CG | VARCHAR2 | (40) | ||
| TRF_PLA_ACV_ACCT | NUMBER | |||
| TRF_PLA_ENCUMBRANCE_ACCT | NUMBER | |||
| TRF_PLA_ANALYTICAL_IPV_ACCT | NUMBER | |||
| TRF_PLA_ANALYTICAL_PO_MI_ACCT | NUMBER | |||
| TRF_PLA_NON_INVOICED_SO_ACCT | NUMBER | |||
| TRF_PLA_NON_INVOICED_REV_ACCT | NUMBER | |||
| TRF_PLA_ANALYTICAL_REV_MI_ACCT | NUMBER | |||
| TRF_PLA_ANALYTICAL_MOGS_ACCT | NUMBER |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| TRANSACTION_REASON_ID | NUMBER | Y | ||
| TRANSACTION_REASON_NAME | VARCHAR2 | (30) | Y | |
| TXN_REASON_DESCRIPTION | VARCHAR2 | (240) | ||
| TXN_REASON_TYPE | NUMBER | |||
| TXN_REASON_TYPE_DISPLAY | VARCHAR2 | (80) | ||
| TXN_REASON_CONTEXT_CODE | VARCHAR2 | (2) | ||
| TXN_REASON_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| TXN_REASON_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| TXN_REASON_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| TXN_REASON_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| TXN_REASON_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| TXN_REASON_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| TXN_REASON_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| TXN_REASON_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| TXN_REASON_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| TXN_REASON_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| TXN_REASON_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| TXN_REASON_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| TXN_REASON_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| TXN_REASON_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| TXN_REASON_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| TXN_REASON_ATTRIBUTE15 | VARCHAR2 | (150) |
APPS.CST_XLA_TXN_REASON_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| WIP_ENTITY_ID | NUMBER | Y | Job or schedule Identifier | |
| WIP_ENTITY_NAME | VARCHAR2 | (240) | Y | WIP job or repetitive assembly name or flow schedule reference code |
| WIP_ENTITY_TYPE | NUMBER | Y | WIP entity type code | |
| WIP_ENTITY_DESCRIPTION | VARCHAR2 | (240) | Description of the discrete job or repetitive assembly |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| EVENT_ID | NUMBER | (15) | ||
| DISTRIBUTION_TYPE | CHAR | (24) | ||
| CURRENCY_CODE | VARCHAR2 | (15) | ||
| CURRENCY_CONVERSION_DATE | DATE | |||
| CURRENCY_CONVERSION_RATE | NUMBER | |||
| CURRENCY_CONVERSION_TYPE | VARCHAR2 | (10) | ||
| TRANSACTION_ID | NUMBER | |||
| TRANSACTION_DATE | DATE | |||
| WIP_TRANSACTION_TYPE_ID | NUMBER | |||
| TRANSACTION_SOURCE_CODE | VARCHAR2 | (30) | ||
| TRANSACTION_SOURCE_LINE_ID | NUMBER | |||
| WIP_ENTITY_ID | NUMBER | |||
| ORGANIZATION_ID | NUMBER | |||
| RESOURCE_ID | NUMBER | |||
| WIP_TXN_BASIS_TYPE | NUMBER | |||
| EMPLOYEE_ID | NUMBER | |||
| DEPT_ID | NUMBER | |||
| CHG_DEPT_ID | NUMBER | |||
| LINE_ID | NUMBER | |||
| OPERATION_SEQ_NUM | NUMBER | |||
| RES_SEQ_NUM | NUMBER | |||
| TRANSACTION_REASON_ID | NUMBER | |||
| ACTIVITY_ID | NUMBER | |||
| BASIS_RESOURCE_ID | NUMBER | |||
| MOVE_TRANSACTION_ID | NUMBER | |||
| TRANSACTION_QUANTITY | NUMBER | |||
| TRANSACTION_UOM | VARCHAR2 | (3) | ||
| PRIMARY_QUANTITY | NUMBER | |||
| PRIMARY_UOM | VARCHAR2 | (3) | ||
| USAGE_RATE_OR_AMOUNT | NUMBER | |||
| STANDARD_RATE_FLAG | NUMBER | |||
| AUTOCHARGE_TYPE | NUMBER | |||
| ACTUAL_RESOURCE_RATE | NUMBER | |||
| STANDARD_RESOURCE_RATE | NUMBER | |||
| COST_UPDATE_ID | NUMBER | |||
| INSTANCE_ID | NUMBER | |||
| TRANSACTION_REFERENCE | VARCHAR2 | (240) | ||
| INVENTORY_ITEM_ID | NUMBER | |||
| COMPLETION_TRANSACTION_ID | NUMBER | |||
| TRANSACTION_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| TRANSACTION_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| TRANSACTION_ATTRIBUTE15 | VARCHAR2 | (150) | ||
| WIP_TXN_PROJECT_ID | NUMBER | |||
| WIP_TXN_TASK_ID | NUMBER | |||
| TRANSFER_TO_GL_INDICATOR | VARCHAR2 | (1) |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ACCOUNTED_AMOUNT | NUMBER | Y | ||
| ENTERED_AMOUNT | NUMBER | |||
| ACCOUNTING_LINE_TYPE_CODE | NUMBER | |||
| CODE_COMBINATION_ID | NUMBER | Y | ||
| COST_ELEMENT_ID | NUMBER | |||
| RATE_OR_AMOUNT | NUMBER | |||
| EVENT_ID | NUMBER | (15) | ||
| LEDGER_ID | NUMBER | (15) | Y | |
| LINE_NUMBER | NUMBER | |||
| DISTRIBUTION_IDENTIFIER | NUMBER | |||
| LINE_WIP_ENTITY_ID | NUMBER | Y |
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| OP_SEQ_NUM | NUMBER | Y | Operation sequence number within a routing | |
| OP_WIP_ENTITY_ID | NUMBER | Y | WIP job or schedule Identifier | |
| OP_REP_SCHED_ID | NUMBER | WIP repetitive schedule Identifier | ||
| OP_DESCRIPTION | VARCHAR2 | (240) | Descriptive text | |
| OP_COUNT_POINT_TYPE | NUMBER | Y | Operation move type | |
| OP_YIELD_ENABLED | VARCHAR2 | (1) | ||
| OP_RECOMMENDED | VARCHAR2 | (1) | ||
| OP_SKIP_CHARGE_FLAG | VARCHAR2 | (1) | ||
| OP_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| OP_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| OP_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| OP_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| OP_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| OP_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| OP_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| OP_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| OP_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| OP_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| OP_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| OP_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| OP_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| OP_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| OP_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| OP_ATTRIBUTE15 | VARCHAR2 | (150) |
APPS.CST_XLA_WIP_OPERATION_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| RES_SEQ_NUM | NUMBER | Y | Resource sequence number | |
| OP_RES_OP_SEQ_NUM | NUMBER | Y | Operation sequence number within a routing | |
| OP_RES_WIP_ENTITY_ID | NUMBER | Y | WIP job or repetitive assembly Identifier | |
| OP_RES_REP_SCHED_ID | NUMBER | WIP repetitive schedule Identifier | ||
| RES_SCHEDULE_TYPE | NUMBER | Y | Method of scheduling the resource | |
| RES_PHANTOM_FLAG | VARCHAR2 | (1) | ||
| RES_PHANTOM_OP_SEQ_NUM | NUMBER | |||
| RES_PHANTOM_ITEM_ID | NUMBER | |||
| OP_RES_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| OP_RES_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| OP_RES_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| OP_RES_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| OP_RES_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| OP_RES_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| OP_RES_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| OP_RES_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| OP_RES_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| OP_RES_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| OP_RES_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| OP_RES_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| OP_RES_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| OP_RES_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| OP_RES_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| OP_RES_ATTRIBUTE15 | VARCHAR2 | (150) |
APPS.CST_XLA_WIP_OP_RESOURCE_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| WIP_ORGANIZATION_ID | NUMBER | Y | Organization Identifier | |
| REPETITIVE_VARIANCE_TYPE | NUMBER | Y | Controls whether variances are relieved for all or completed and cancelled schedules | |
| ESTIMATED_SCRAP_ACCOUNTING | VARCHAR2 | (1) | ||
| ORG_WIP_ATTRIBUTE_CATEGORY | VARCHAR2 | (30) | ||
| ORG_WIP_ATTRIBUTE1 | VARCHAR2 | (150) | ||
| ORG_WIP_ATTRIBUTE2 | VARCHAR2 | (150) | ||
| ORG_WIP_ATTRIBUTE3 | VARCHAR2 | (150) | ||
| ORG_WIP_ATTRIBUTE4 | VARCHAR2 | (150) | ||
| ORG_WIP_ATTRIBUTE5 | VARCHAR2 | (150) | ||
| ORG_WIP_ATTRIBUTE6 | VARCHAR2 | (150) | ||
| ORG_WIP_ATTRIBUTE7 | VARCHAR2 | (150) | ||
| ORG_WIP_ATTRIBUTE8 | VARCHAR2 | (150) | ||
| ORG_WIP_ATTRIBUTE9 | VARCHAR2 | (150) | ||
| ORG_WIP_ATTRIBUTE10 | VARCHAR2 | (150) | ||
| ORG_WIP_ATTRIBUTE11 | VARCHAR2 | (150) | ||
| ORG_WIP_ATTRIBUTE12 | VARCHAR2 | (150) | ||
| ORG_WIP_ATTRIBUTE13 | VARCHAR2 | (150) | ||
| ORG_WIP_ATTRIBUTE14 | VARCHAR2 | (150) | ||
| ORG_WIP_ATTRIBUTE15 | VARCHAR2 | (150) |
APPS.CST_XLA_WIP_ORG_PARAMS_REF_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| WIP_ENTITY | VARCHAR2 | (240) | Y | |
| ASSEMBLY_NAME | VARCHAR2 | (40) | ||
| RESOURCE_CODE | VARCHAR2 | (10) | ||
| PRIMARY_QUANTITY | NUMBER | |||
| ORGANIZATION_CODE | VARCHAR2 | (3) | ||
| DEPARTMENT_CODE | VARCHAR2 | (10) | ||
| OPERATION_SEQ_NUM | NUMBER | |||
| TRANSACTION_DATE | DATE | Y | ||
| BASIS_TYPE | VARCHAR2 | (80) | ||
| REASON_NAME | VARCHAR2 | (30) | ||
| TRANSACTION_ID | NUMBER | Y | ||
| RESOURCE_ID | NUMBER | |||
| BASIS_TYPE_ID | NUMBER |
APPS.CST_XLA_WIP_V is not referenced by any database object
Oracle Corporation does not support access to Oracle applications data using this object, except from standard Oracle Applications programs.
Internal
| Name | Datatype | Length | Mandatory | Comments |
|---|---|---|---|---|
| ITEM_NAME | VARCHAR2 | (40) | ||
| PO_NUMBER | VARCHAR2 | (20) | ||
| VENDOR_NAME | VARCHAR2 | (240) | ||
| TRANSACTION_DATE | DATE | Y | ||
| DESTINATION_TYPE_CODE | VARCHAR2 | (25) | ||
| OPERATING_UNIT_NAME | VARCHAR2 | (240) | Y | |
| REASON_NAME | VARCHAR2 | (30) | ||
| COMMENTS | VARCHAR2 | (240) | ||
| OPERATING_UNIT_ID | NUMBER | Y | ||
| WRITE_OFF_ID | NUMBER | Y |
APPS.CST_XLA_WO_V is not referenced by any database object
|
|
|
| Copyright (c) 2001 - 2005, Oracle | - Use Restricted by Contract |