1 PACKAGE BODY HR_OTT_DEL as
2 /* $Header: hrottrhi.pkb 115.1 2004/04/05 07:21 menderby noship $ */
3 --
4 -- ----------------------------------------------------------------------------
5 -- | Private Global Definitions |
6 -- ----------------------------------------------------------------------------
7 --
8 g_package varchar2(33) := ' hr_ott_del.'; -- Global package name
9 --
10 -- ----------------------------------------------------------------------------
11 -- |------------------------------< delete_dml >------------------------------|
12 -- ----------------------------------------------------------------------------
13 -- {Start Of Comments}
14 --
15 -- Description:
16 -- This procedure controls the actual dml delete logic. The functions of
17 -- this procedure are as follows:
18 -- 1) To set and unset the g_api_dml status as required (as we are about to
19 -- perform dml).
20 -- 2) To delete the specified row from the schema using the primary key in
21 -- the predicates.
22 -- 3) To trap any constraint violations that may have occurred.
23 -- 4) To raise any other errors.
24 --
25 -- Prerequisites:
26 -- This is an internal private procedure which must be called from the del
27 -- procedure.
28 --
29 -- In Parameters:
30 -- A Pl/Sql record structre.
31 --
32 -- Post Success:
33 -- The specified row will be delete from the schema.
34 --
35 -- Post Failure:
36 -- On the delete dml failure it is important to note that we always reset the
37 -- g_api_dml status to false.
38 -- If a child integrity constraint violation is raised the
39 -- constraint_error procedure will be called.
40 -- If any other error is reported, the error will be raised after the
41 -- g_api_dml status is reset.
42 --
43 -- Developer Implementation Notes:
44 -- None.
45 --
46 -- Access Status:
47 -- Internal Row Handler Use Only.
48 --
49 -- {End Of Comments}
50 -- ----------------------------------------------------------------------------
51 Procedure delete_dml
52 (p_rec in hr_ott_shd.g_rec_type
53 ) is
54 --
55 l_proc varchar2(72) := g_package||'delete_dml';
56 --
57 Begin
58 hr_utility.set_location('Entering:'||l_proc, 5);
59 --
60 --
61 --
62 -- Delete the hr_ki_option_types_tl row.
63 --
64 delete from hr_ki_option_types_tl
65 where option_type_id = p_rec.option_type_id
66 and language = p_rec.language;
67 --
68 --
69 --
70 hr_utility.set_location(' Leaving:'||l_proc, 10);
71 --
72 Exception
73 When hr_api.child_integrity_violated then
74 -- Child integrity has been violated
75 --
76 hr_ott_shd.constraint_error
77 (p_constraint_name => hr_api.strip_constraint_name(SQLERRM));
78 When Others Then
79 --
80 Raise;
81 End delete_dml;
82 --
83 -- ----------------------------------------------------------------------------
84 -- |------------------------------< pre_delete >------------------------------|
85 -- ----------------------------------------------------------------------------
86 -- {Start Of Comments}
87 --
88 -- Description:
89 -- This private procedure contains any processing which is required before
90 -- the delete dml.
91 --
92 -- Prerequisites:
93 -- This is an internal procedure which is called from the del procedure.
94 --
95 -- In Parameters:
96 -- A Pl/Sql record structre.
97 --
98 -- Post Success:
99 -- Processing continues.
100 --
101 -- Post Failure:
102 -- If an error has occurred, an error message and exception will be raised
103 -- but not handled.
104 --
105 -- Developer Implementation Notes:
106 -- Any pre-processing required before the delete dml is issued should be
107 -- coded within this procedure. It is important to note that any 3rd party
108 -- maintenance should be reviewed before placing in this procedure.
109 --
110 -- Access Status:
111 -- Internal Row Handler Use Only.
112 --
113 -- {End Of Comments}
114 -- ----------------------------------------------------------------------------
115 Procedure pre_delete(p_rec in hr_ott_shd.g_rec_type) is
116 --
117 l_proc varchar2(72) := g_package||'pre_delete';
118 --
119 Begin
120 hr_utility.set_location('Entering:'||l_proc, 5);
121 --
122 hr_utility.set_location(' Leaving:'||l_proc, 10);
123 End pre_delete;
124 --
125 -- ----------------------------------------------------------------------------
126 -- |-----------------------------< post_delete >------------------------------|
127 -- ----------------------------------------------------------------------------
128 -- {Start Of Comments}
129 --
130 -- Description:
131 -- This private procedure contains any processing which is required after
132 -- the delete dml.
133 --
134 -- Prerequistes:
135 -- This is an internal procedure which is called from the del procedure.
136 --
137 -- In Parameters:
138 -- A Pl/Sql record structure.
139 --
140 -- Post Success:
141 -- Processing continues.
142 --
143 -- Post Failure:
144 -- If an error has occurred, an error message and exception will be raised
145 -- but not handled.
146 --
147 -- Developer Implementation Notes:
148 -- Any post-processing required after the delete dml is issued should be
149 -- coded within this procedure. It is important to note that any 3rd party
150 -- maintenance should be reviewed before placing in this procedure.
151 --
152 -- Access Status:
153 -- Internal Row Handler Use Only.
154 --
155 -- {End Of Comments}
156 -- -----------------------------------------------------------------------------
157 Procedure post_delete(p_rec in hr_ott_shd.g_rec_type) is
158 --
159 l_proc varchar2(72) := g_package||'post_delete';
160 --
161 Begin
162 hr_utility.set_location('Entering:'||l_proc, 5);
163 begin
164 --
165
166 hr_ott_rkd.after_delete
167 (p_option_type_id
168 => p_rec.option_type_id
169 ,p_language
170 => p_rec.language
171 ,p_option_name_o
172 => hr_ott_shd.g_old_rec.option_name
173 ,p_source_lang_o
174 => hr_ott_shd.g_old_rec.source_lang
175 );
176 --
177 exception
178 --
179 when hr_api.cannot_find_prog_unit then
180 --
181 hr_api.cannot_find_prog_unit_error
182 (p_module_name => 'HR_KI_OPTION_TYPES_TL'
183 ,p_hook_type => 'AD');
184 --
185 end;
186 --
187 hr_utility.set_location(' Leaving:'||l_proc, 10);
188 End post_delete;
189 --
190 -- ----------------------------------------------------------------------------
191 -- |---------------------------------< del >----------------------------------|
192 -- ----------------------------------------------------------------------------
193 Procedure del
194 (p_rec in hr_ott_shd.g_rec_type
195 ) is
196 --
197 l_proc varchar2(72) := g_package||'del';
198 --
199 Begin
200 hr_utility.set_location('Entering:'||l_proc, 5);
201 --
202 -- We must lock the row which we need to delete.
203 --
204 hr_ott_shd.lck
205 (p_rec.option_type_id
206 ,p_rec.language
207 );
208 --
209 -- Call the supporting delete validate operation
210 --
211 hr_ott_bus.delete_validate(p_rec);
212 --
213 -- Call to raise any errors on multi-message list
214 hr_multi_message.end_validation_set;
215 --
216 -- Call the supporting pre-delete operation
217 --
218 hr_ott_del.pre_delete(p_rec);
219 --
220 -- Delete the row.
221 --
222 hr_ott_del.delete_dml(p_rec);
223 --
224 -- Call the supporting post-delete operation
225 --
226 hr_ott_del.post_delete(p_rec);
227 --
228 -- Call to raise any errors on multi-message list
229 hr_multi_message.end_validation_set;
230 --
231 End del;
232 --
233 -- ----------------------------------------------------------------------------
234 -- |---------------------------------< del >----------------------------------|
235 -- ----------------------------------------------------------------------------
236 Procedure del
237 (p_option_type_id in number
238 ,p_language in varchar2
239 ) is
240 --
241 l_rec hr_ott_shd.g_rec_type;
242 l_proc varchar2(72) := g_package||'del';
243 --
244 Begin
245 hr_utility.set_location('Entering:'||l_proc, 5);
246 --
247 -- As the delete procedure accepts a plsql record structure we do need to
248 -- convert the arguments into the record structure.
249 -- We don't need to call the supplied conversion argument routine as we
250 -- only need a few attributes.
251 --
252 l_rec.option_type_id := p_option_type_id; l_rec.language := p_language;
253 --
254 --
255 -- Having converted the arguments into the hr_ott_rec
256 -- plsql record structure we must call the corresponding entity
257 -- business process
258 --
259 hr_ott_del.del(l_rec);
260 --
261 hr_utility.set_location(' Leaving:'||l_proc, 10);
262 End del;
263 --
264 -- ----------------------------------------------------------------------------
265 -- |------------------------------< del_tl >----------------------------------|
266 -- ----------------------------------------------------------------------------
267 Procedure del_tl
268 (p_option_type_id in number
269 ,p_associated_column1 in varchar2 default null
270 ) is
271 --
272 -- Cursor to obtain all the translation rows.
273 --
274 cursor csr_del_langs is
275 select ott.language
276 from hr_ki_option_types_tl ott
277 where
278 ott.option_type_id = p_option_type_id;
279 --
280 l_proc varchar2(72) := g_package||'del_tl';
281 --
282 Begin
283 hr_utility.set_location('Entering:'||l_proc,10);
284 --
285 -- Delete all the translated rows
286 --
287 for l_lang in csr_del_langs loop
288 hr_ott_del.del
289 (p_option_type_id => p_option_type_id
290 ,p_language => l_lang.language
291 );
292 end loop;
293 --
294 hr_utility.set_location(' Leaving:'||l_proc,20);
295 End del_tl;
296 --
297 end hr_ott_del;