1 Package Body per_bil_del as
2 /* $Header: pebilrhi.pkb 115.10 2003/04/10 09:19:39 jheer noship $ */
3 --
4 -- ----------------------------------------------------------------------------
5 -- | Private Global Definitions |
6 -- ----------------------------------------------------------------------------
7 --
8 g_package varchar2(33) := ' per_bil_del.'; -- Global package name
9 --
10 -- ----------------------------------------------------------------------------
11 -- |------------------------------< delete_dml >------------------------------|
12 -- ----------------------------------------------------------------------------
13 -- {Start Of Comments}
14 --
15 -- Description:
16 -- This procedure controls the actual dml delete logic. The functions of
17 -- this procedure are as follows:
18 -- 1) To set and unset the g_api_dml status as required (as we are about to
19 -- perform dml).
20 -- 2) To delete the specified row from the schema using the primary key in
21 -- the predicates.
22 -- 3) To trap any constraint violations that may have occurred.
23 -- 4) To raise any other errors.
24 --
25 -- Prerequisites:
26 -- This is an internal private procedure which must be called from the del
27 -- procedure.
28 --
29 -- In Parameters:
30 -- A Pl/Sql record structre.
31 --
32 -- Post Success:
33 -- The specified row will be delete from the schema.
34 --
35 -- Post Failure:
36 -- On the delete dml failure it is important to note that we always reset the
37 -- g_api_dml status to false.
38 -- If a child integrity constraint violation is raised the
39 -- constraint_error procedure will be called.
40 -- If any other error is reported, the error will be raised after the
41 -- g_api_dml status is reset.
42 --
43 -- Developer Implementation Notes:
44 -- None.
45 --
46 -- Access Status:
47 -- Internal Row Handler Use Only.
48 --
49 -- {End Of Comments}
50 -- ----------------------------------------------------------------------------
51 Procedure delete_dml(p_rec in per_bil_shd.g_rec_type) is
52 --
53 l_proc varchar2(72) := g_package||'delete_dml';
54 --
55 Begin
56 hr_utility.set_location('Entering:'||l_proc, 5);
57 --
58 per_bil_shd.g_api_dml := true; -- Set the api dml status
59 --
60 -- Delete the hr_summary row.
61 --
62 delete from hr_summary
63 where id_value = p_rec.id_value;
64 --
65 per_bil_shd.g_api_dml := false; -- Unset the api dml status
66 --
67 hr_utility.set_location(' Leaving:'||l_proc, 10);
68 --
69 Exception
70 When hr_api.child_integrity_violated then
71 -- Child integrity has been violated
72 per_bil_shd.g_api_dml := false; -- Unset the api dml status
73 per_bil_shd.constraint_error
74 (p_constraint_name => hr_api.strip_constraint_name(SQLERRM));
75 When Others Then
76 per_bil_shd.g_api_dml := false; -- Unset the api dml status
77 Raise;
78 End delete_dml;
79 --
80 -- ----------------------------------------------------------------------------
81 -- |------------------------------< pre_delete >------------------------------|
82 -- ----------------------------------------------------------------------------
83 -- {Start Of Comments}
84 --
85 -- Description:
86 -- This private procedure contains any processing which is required before
87 -- the delete dml.
88 --
89 -- Prerequisites:
90 -- This is an internal procedure which is called from the del procedure.
91 --
92 -- In Parameters:
93 -- A Pl/Sql record structre.
94 --
95 -- Post Success:
96 -- Processing continues.
97 --
98 -- Post Failure:
99 -- If an error has occurred, an error message and exception will be raised
100 -- but not handled.
101 --
102 -- Developer Implementation Notes:
103 -- Any pre-processing required before the delete dml is issued should be
104 -- coded within this procedure. It is important to note that any 3rd party
105 -- maintenance should be reviewed before placing in this procedure.
106 --
107 -- Access Status:
108 -- Internal Row Handler Use Only.
109 --
110 -- {End Of Comments}
111 -- ----------------------------------------------------------------------------
112 Procedure pre_delete(p_rec in per_bil_shd.g_rec_type) is
113 --
114 l_proc varchar2(72) := g_package||'pre_delete';
115 --
116 Begin
117 hr_utility.set_location('Entering:'||l_proc, 5);
118 --
119 hr_utility.set_location(' Leaving:'||l_proc, 10);
120 End pre_delete;
121 --
122 -- ----------------------------------------------------------------------------
123 -- |-----------------------------< post_delete >------------------------------|
124 -- ----------------------------------------------------------------------------
125 -- {Start Of Comments}
126 --
127 -- Description:
128 -- This private procedure contains any processing which is required after the
129 -- delete dml.
130 --
131 -- Prerequisites:
132 -- This is an internal procedure which is called from the del procedure.
133 --
134 -- In Parameters:
135 -- A Pl/Sql record structre.
136 --
137 -- Post Success:
138 -- Processing continues.
139 --
140 -- Post Failure:
141 -- If an error has occurred, an error message and exception will be raised
142 -- but not handled.
143 --
144 -- Developer Implementation Notes:
145 -- Any post-processing required after the delete dml is issued should be
146 -- coded within this procedure. It is important to note that any 3rd party
147 -- maintenance should be reviewed before placing in this procedure.
148 --
149 -- Access Status:
150 -- Internal table Handler Use Only.
151 --
152 -- {End Of Comments}
153 -- ----------------------------------------------------------------------------
154 Procedure post_delete(p_rec in per_bil_shd.g_rec_type) is
155 --
156 l_proc varchar2(72) := g_package||'post_delete';
157 --
158 Begin
159 hr_utility.set_location('Entering:'||l_proc, 5);
160 --
161 --
162 -- Start of API User Hook for post_delete.
163 --
164 begin
165 --
166 /*
167 per_bil_rkd.after_delete
168 (
169 p_id_value =>p_rec.id_value
170 ,p_type_o =>per_bil_shd.g_old_rec.type
171 ,p_business_group_id_o =>per_bil_shd.g_old_rec.business_group_id
172 ,p_object_version_number_o =>per_bil_shd.g_old_rec.object_version_number
173 ,p_fk_value1_o =>per_bil_shd.g_old_rec.fk_value1
174 ,p_fk_value2_o =>per_bil_shd.g_old_rec.fk_value2
175 ,p_fk_value3_o =>per_bil_shd.g_old_rec.fk_value3
176 ,p_text_value1_o =>per_bil_shd.g_old_rec.text_value1
177 ,p_text_value2_o =>per_bil_shd.g_old_rec.text_value2
178 ,p_text_value3_o =>per_bil_shd.g_old_rec.text_value3
179 ,p_text_value4_o =>per_bil_shd.g_old_rec.text_value4
180 ,p_text_value5_o =>per_bil_shd.g_old_rec.text_value5
181 ,p_text_value6_o =>per_bil_shd.g_old_rec.text_value6
182 ,p_text_value7_o =>per_bil_shd.g_old_rec.text_value7
183 ,p_num_value1_o =>per_bil_shd.g_old_rec.num_value1
184 ,p_num_value2_o =>per_bil_shd.g_old_rec.num_value2
185 ,p_num_value3_o =>per_bil_shd.g_old_rec.num_value3
186 ,p_date_value1_o =>per_bil_shd.g_old_rec.date_value1
187 ,p_date_value2_o =>per_bil_shd.g_old_rec.date_value2
188 ,p_date_value3_o =>per_bil_shd.g_old_rec.date_value3
189 );
190 */
191 null;
192 --
193 exception
194 --
195 when hr_api.cannot_find_prog_unit then
196 --
197 hr_api.cannot_find_prog_unit_error
198 (p_module_name => 'hr_summary'
199 ,p_hook_type => 'AD');
200 --
201 end;
202 --
203 -- End of API User Hook for post_delete.
204 --
205 --
206 hr_utility.set_location(' Leaving:'||l_proc, 10);
207 End post_delete;
208 --
209 -- ----------------------------------------------------------------------------
210 -- |---------------------------------< del >----------------------------------|
211 -- ----------------------------------------------------------------------------
212 Procedure del
213 (
214 p_rec in per_bil_shd.g_rec_type
215 ) is
216 --
217 l_proc varchar2(72) := g_package||'del';
218 --
219 Begin
220 hr_utility.set_location('Entering:'||l_proc, 5);
221 --
222 -- We must lock the row which we need to delete.
223 --
224 per_bil_shd.lck
225 (
226 p_rec.id_value,
227 p_rec.object_version_number
228 );
229 --
230 -- Call the supporting delete validate operation
231 --
232 per_bil_bus.delete_validate(p_rec);
233 --
234 -- Call the supporting pre-delete operation
235 --
236 pre_delete(p_rec);
237 --
238 -- Delete the row.
239 --
240 delete_dml(p_rec);
241 --
242 -- Call the supporting post-delete operation
243 --
244 post_delete(p_rec);
245 End del;
246 --
247 -- ----------------------------------------------------------------------------
248 -- |---------------------------------< del >----------------------------------|
249 -- ----------------------------------------------------------------------------
250 Procedure del
251 (
252 p_id_value in number,
253 p_object_version_number in number
254 ) is
255 --
256 l_rec per_bil_shd.g_rec_type;
257 l_proc varchar2(72) := g_package||'del';
258 --
259 Begin
260 hr_utility.set_location('Entering:'||l_proc, 5);
261 --
262 -- As the delete procedure accepts a plsql record structure we do need to
263 -- convert the arguments into the record structure.
264 -- We don't need to call the supplied conversion argument routine as we
265 -- only need a few attributes.
266 --
267 l_rec.id_value:= p_id_value;
268 l_rec.object_version_number := p_object_version_number;
269 --
270 -- Having converted the arguments into the per_bil_rec
271 -- plsql record structure we must call the corresponding entity
272 -- business process
273 --
274 del(l_rec);
275 --
276 hr_utility.set_location(' Leaving:'||l_proc, 10);
277 End del;
278 --
279 end per_bil_del;
[Home] [Help]