1 Package Body ben_bri_del as
2 /* $Header: bebrirhi.pkb 120.0 2005/05/28 00:51:44 appldev noship $ */
3 --
4 -- ----------------------------------------------------------------------------
5 -- | Private Global Definitions |
6 -- ----------------------------------------------------------------------------
7 --
8 g_package varchar2(33) := ' ben_bri_del.'; -- Global package name
9 --
10 -- ----------------------------------------------------------------------------
11 -- |------------------------------< delete_dml >------------------------------|
12 -- ----------------------------------------------------------------------------
13 -- {Start Of Comments}
14 --
15 -- Description:
16 -- This procedure controls the actual dml delete logic. The functions of
17 -- this procedure are as follows:
18 -- 1) To set and unset the g_api_dml status as required (as we are about to
19 -- perform dml).
20 -- 2) To delete the specified row from the schema using the primary key in
21 -- the predicates.
22 -- 3) To trap any constraint violations that may have occurred.
23 -- 4) To raise any other errors.
24 --
25 -- Prerequisites:
26 -- This is an internal private procedure which must be called from the del
27 -- procedure.
28 --
29 -- In Parameters:
30 -- A Pl/Sql record structre.
31 --
32 -- Post Success:
33 -- The specified row will be delete from the schema.
34 --
35 -- Post Failure:
36 -- On the delete dml failure it is important to note that we always reset the
37 -- g_api_dml status to false.
38 -- If a child integrity constraint violation is raised the
39 -- constraint_error procedure will be called.
40 -- If any other error is reported, the error will be raised after the
41 -- g_api_dml status is reset.
42 --
43 -- Developer Implementation Notes:
44 -- None.
45 --
46 -- Access Status:
47 -- Internal Row Handler Use Only.
48 --
49 -- {End Of Comments}
50 -- ----------------------------------------------------------------------------
51 Procedure delete_dml(p_rec in ben_bri_shd.g_rec_type) is
52 --
53 l_proc varchar2(72) := g_package||'delete_dml';
54 --
55 Begin
56 hr_utility.set_location('Entering:'||l_proc, 5);
57 --
58 ben_bri_shd.g_api_dml := true; -- Set the api dml status
59 --
60 -- Delete the ben_batch_rate_info row.
61 --
62 delete from ben_batch_rate_info
63 where batch_rt_id = p_rec.batch_rt_id;
64 --
65 ben_bri_shd.g_api_dml := false; -- Unset the api dml status
66 --
67 hr_utility.set_location(' Leaving:'||l_proc, 10);
68 --
69 Exception
70 When hr_api.child_integrity_violated then
71 -- Child integrity has been violated
72 ben_bri_shd.g_api_dml := false; -- Unset the api dml status
73 ben_bri_shd.constraint_error
74 (p_constraint_name => hr_api.strip_constraint_name(SQLERRM));
75 When Others Then
76 ben_bri_shd.g_api_dml := false; -- Unset the api dml status
77 Raise;
78 End delete_dml;
79 --
80 -- ----------------------------------------------------------------------------
81 -- |------------------------------< pre_delete >------------------------------|
82 -- ----------------------------------------------------------------------------
83 -- {Start Of Comments}
84 --
85 -- Description:
86 -- This private procedure contains any processing which is required before
87 -- the delete dml.
88 --
89 -- Prerequisites:
90 -- This is an internal procedure which is called from the del procedure.
91 --
92 -- In Parameters:
93 -- A Pl/Sql record structre.
94 --
95 -- Post Success:
96 -- Processing continues.
97 --
98 -- Post Failure:
99 -- If an error has occurred, an error message and exception will be raised
100 -- but not handled.
101 --
102 -- Developer Implementation Notes:
103 -- Any pre-processing required before the delete dml is issued should be
104 -- coded within this procedure. It is important to note that any 3rd party
105 -- maintenance should be reviewed before placing in this procedure.
106 --
107 -- Access Status:
108 -- Internal Row Handler Use Only.
109 --
110 -- {End Of Comments}
111 -- ----------------------------------------------------------------------------
112 Procedure pre_delete(p_rec in ben_bri_shd.g_rec_type) is
113 --
114 l_proc varchar2(72) := g_package||'pre_delete';
115 --
116 Begin
117 hr_utility.set_location('Entering:'||l_proc, 5);
118 --
119 hr_utility.set_location(' Leaving:'||l_proc, 10);
120 End pre_delete;
121 --
122 -- ----------------------------------------------------------------------------
123 -- |-----------------------------< post_delete >------------------------------|
124 -- ----------------------------------------------------------------------------
125 -- {Start Of Comments}
126 --
127 -- Description:
128 -- This private procedure contains any processing which is required after the
129 -- delete dml.
130 --
131 -- Prerequisites:
132 -- This is an internal procedure which is called from the del procedure.
133 --
134 -- In Parameters:
135 -- A Pl/Sql record structre.
136 --
137 -- Post Success:
138 -- Processing continues.
139 --
140 -- Post Failure:
141 -- If an error has occurred, an error message and exception will be raised
142 -- but not handled.
143 --
144 -- Developer Implementation Notes:
145 -- Any post-processing required after the delete dml is issued should be
146 -- coded within this procedure. It is important to note that any 3rd party
147 -- maintenance should be reviewed before placing in this procedure.
148 --
149 -- Access Status:
150 -- Internal table Handler Use Only.
151 --
152 -- {End Of Comments}
153 -- ----------------------------------------------------------------------------
154 Procedure post_delete(p_effective_date in date,
155 p_rec in ben_bri_shd.g_rec_type) is
156 --
157 l_proc varchar2(72) := g_package||'post_delete';
158 --
159 Begin
160 hr_utility.set_location('Entering:'||l_proc, 5);
161 --
162 --
163 -- Start of API User Hook for post_delete.
164 --
165 begin
166 --
167 ben_bri_rkd.after_delete
168 (p_batch_rt_id =>p_rec.batch_rt_id
169 ,p_benefit_action_id_o =>ben_bri_shd.g_old_rec.benefit_action_id
170 ,p_person_id_o =>ben_bri_shd.g_old_rec.person_id
171 ,p_pgm_id_o =>ben_bri_shd.g_old_rec.pgm_id
172 ,p_pl_id_o =>ben_bri_shd.g_old_rec.pl_id
173 ,p_oipl_id_o =>ben_bri_shd.g_old_rec.oipl_id
174 ,p_bnft_rt_typ_cd_o =>ben_bri_shd.g_old_rec.bnft_rt_typ_cd
175 ,p_dflt_flag_o =>ben_bri_shd.g_old_rec.dflt_flag
176 ,p_val_o =>ben_bri_shd.g_old_rec.val
177 ,p_old_val_o =>ben_bri_shd.g_old_rec.old_val
178 ,p_tx_typ_cd_o =>ben_bri_shd.g_old_rec.tx_typ_cd
179 ,p_acty_typ_cd_o =>ben_bri_shd.g_old_rec.acty_typ_cd
180 ,p_mn_elcn_val_o =>ben_bri_shd.g_old_rec.mn_elcn_val
181 ,p_mx_elcn_val_o =>ben_bri_shd.g_old_rec.mx_elcn_val
182 ,p_incrmt_elcn_val_o =>ben_bri_shd.g_old_rec.incrmt_elcn_val
183 ,p_dflt_val_o =>ben_bri_shd.g_old_rec.dflt_val
184 ,p_rt_strt_dt_o =>ben_bri_shd.g_old_rec.rt_strt_dt
185 ,p_business_group_id_o =>ben_bri_shd.g_old_rec.business_group_id
186 ,p_object_version_number_o =>ben_bri_shd.g_old_rec.object_version_number
187 ,p_enrt_cvg_strt_dt_o =>ben_bri_shd.g_old_rec.enrt_cvg_strt_dt
188 ,p_enrt_cvg_thru_dt_o =>ben_bri_shd.g_old_rec.enrt_cvg_thru_dt
189 ,p_actn_cd_o =>ben_bri_shd.g_old_rec.actn_cd
190 ,p_close_actn_itm_dt_o =>ben_bri_shd.g_old_rec.close_actn_itm_dt
191 );
192 --
193 exception
194 --
195 when hr_api.cannot_find_prog_unit then
196 --
197 hr_api.cannot_find_prog_unit_error
198 (p_module_name => 'ben_batch_rate_info'
199 ,p_hook_type => 'AD');
200 --
201 end;
202 --
203 -- End of API User Hook for post_delete.
204 --
205 --
206 hr_utility.set_location(' Leaving:'||l_proc, 10);
207 End post_delete;
208 --
209 -- ----------------------------------------------------------------------------
210 -- |---------------------------------< del >----------------------------------|
211 -- ----------------------------------------------------------------------------
212 Procedure del
213 (
214 p_effective_date in date,
215 p_rec in ben_bri_shd.g_rec_type
216 ) is
217 --
218 l_proc varchar2(72) := g_package||'del';
219 --
220 Begin
221 hr_utility.set_location('Entering:'||l_proc, 5);
222 --
223 -- We must lock the row which we need to delete.
224 --
225 ben_bri_shd.lck
226 (
227 p_rec.batch_rt_id,
228 p_rec.object_version_number
229 );
230 --
231 -- Call the supporting delete validate operation
232 --
233 ben_bri_bus.delete_validate(p_rec,p_effective_date);
234 --
235 -- Call the supporting pre-delete operation
236 --
237 pre_delete(p_rec);
238 --
239 -- Delete the row.
240 --
241 delete_dml(p_rec);
242 --
243 -- Call the supporting post-delete operation
244 --
245 post_delete(p_effective_date,p_rec);
246 --
247 End del;
248 --
249 -- ----------------------------------------------------------------------------
250 -- |---------------------------------< del >----------------------------------|
251 -- ----------------------------------------------------------------------------
252 Procedure del
253 (
254 p_effective_date in date,
255 p_batch_rt_id in number,
256 p_object_version_number in number
257 ) is
258 --
259 l_rec ben_bri_shd.g_rec_type;
260 l_proc varchar2(72) := g_package||'del';
261 --
262 Begin
263 hr_utility.set_location('Entering:'||l_proc, 5);
264 --
265 -- As the delete procedure accepts a plsql record structure we do need to
266 -- convert the arguments into the record structure.
267 -- We don't need to call the supplied conversion argument routine as we
268 -- only need a few attributes.
269 --
270 l_rec.batch_rt_id:= p_batch_rt_id;
271 l_rec.object_version_number := p_object_version_number;
272 --
273 -- Having converted the arguments into the ben_bri_rec
274 -- plsql record structure we must call the corresponding entity
275 -- business process
276 --
277 del(p_effective_date,l_rec);
278 --
279 hr_utility.set_location(' Leaving:'||l_proc, 10);
280 End del;
281 --
282 end ben_bri_del;