1 Package Body hxc_map_del as
2 /* $Header: hxcmaprhi.pkb 120.2 2005/09/23 08:17:59 nissharm noship $ */
3 --
4 -- ----------------------------------------------------------------------------
5 -- | Private Global Definitions |
6 -- ----------------------------------------------------------------------------
7 --
8 g_package varchar2(33) := ' hxc_map_del.'; -- Global package name
9
10 g_debug boolean := hr_utility.debug_enabled;
11 --
12 -- ----------------------------------------------------------------------------
13 -- |------------------------------< delete_dml >------------------------------|
14 -- ----------------------------------------------------------------------------
15 -- {Start Of Comments}
16 --
17 -- Description:
18 -- This procedure controls the actual dml delete logic. The functions of
19 -- this procedure are as follows:
20 -- 1) To set and unset the g_api_dml status as required (as we are about to
21 -- perform dml).
22 -- 2) To delete the specified row from the schema using the primary key in
23 -- the predicates.
24 -- 3) To trap any constraint violations that may have occurred.
25 -- 4) To raise any other errors.
26 --
27 -- Prerequisites:
28 -- This is an internal private procedure which must be called from the del
29 -- procedure.
30 --
31 -- In Parameters:
32 -- A Pl/Sql record structre.
33 --
34 -- Post Success:
35 -- The specified row will be delete from the schema.
36 --
37 -- Post Failure:
38 -- On the delete dml failure it is important to note that we always reset the
39 -- g_api_dml status to false.
40 -- If a child integrity constraint violation is raised the
41 -- constraint_error procedure will be called.
42 -- If any other error is reported, the error will be raised after the
43 -- g_api_dml status is reset.
44 --
45 -- Developer Implementation Notes:
46 -- None.
47 --
48 -- Access Status:
49 -- Internal Row Handler Use Only.
50 --
51 -- {End Of Comments}
52 -- ----------------------------------------------------------------------------
53 Procedure delete_dml
54 (p_rec in hxc_map_shd.g_rec_type
55 ) is
56 --
57 l_proc varchar2(72);
58 --
59 Begin
60
61
62 if g_debug then
63 l_proc := g_package||'delete_dml';
64 hr_utility.set_location('Entering:'||l_proc, 5);
65 end if;
66 --
67 hxc_map_shd.g_api_dml := true; -- Set the api dml status
68 --
69 -- First of all delete any child rows
70 --
71 delete from hxc_mapping_comp_usages
72 where mapping_id = p_rec.mapping_id;
73 --
74 -- Delete the hxc_mappings row.
75 --
76 delete from hxc_mappings
77 where mapping_id = p_rec.mapping_id;
78 --
79 hxc_map_shd.g_api_dml := false; -- Unset the api dml status
80 --
81 if g_debug then
82 hr_utility.set_location(' Leaving:'||l_proc, 10);
83 end if;
84 --
85 Exception
86 When hr_api.child_integrity_violated then
87 -- Child integrity has been violated
88 hxc_map_shd.g_api_dml := false; -- Unset the api dml status
89 hxc_map_shd.constraint_error
90 (p_constraint_name => hr_api.strip_constraint_name(SQLERRM));
91 When Others Then
92 hxc_map_shd.g_api_dml := false; -- Unset the api dml status
93 Raise;
94 End delete_dml;
95 --
96 -- ----------------------------------------------------------------------------
97 -- |------------------------------< pre_delete >------------------------------|
98 -- ----------------------------------------------------------------------------
99 -- {Start Of Comments}
100 --
101 -- Description:
102 -- This private procedure contains any processing which is required before
103 -- the delete dml.
104 --
105 -- Prerequisites:
106 -- This is an internal procedure which is called from the del procedure.
107 --
108 -- In Parameters:
109 -- A Pl/Sql record structre.
110 --
111 -- Post Success:
112 -- Processing continues.
113 --
114 -- Post Failure:
115 -- If an error has occurred, an error message and exception will be raised
116 -- but not handled.
117 --
118 -- Developer Implementation Notes:
119 -- Any pre-processing required before the delete dml is issued should be
120 -- coded within this procedure. It is important to note that any 3rd party
121 -- maintenance should be reviewed before placing in this procedure.
122 --
123 -- Access Status:
124 -- Internal Row Handler Use Only.
125 --
126 -- {End Of Comments}
127 -- ----------------------------------------------------------------------------
128 Procedure pre_delete(p_rec in hxc_map_shd.g_rec_type) is
129 --
130 l_proc varchar2(72);
131 --
132 Begin
133
134
135 if g_debug then
136 l_proc := g_package||'pre_delete';
137 hr_utility.set_location('Entering:'||l_proc, 5);
138 --
139 hr_utility.set_location(' Leaving:'||l_proc, 10);
140 end if;
141 End pre_delete;
142 --
143 -- ----------------------------------------------------------------------------
144 -- |-----------------------------< post_delete >------------------------------|
145 -- ----------------------------------------------------------------------------
146 -- {Start Of Comments}
147 --
148 -- Description:
149 -- This private procedure contains any processing which is required after the
150 -- delete dml.
151 --
152 -- Prerequistes:
153 -- This is an internal procedure which is called from the del procedure.
154 --
155 -- In Parameters:
156 -- A Pl/Sql record structure.
157 --
158 -- Post Success:
159 -- Processing continues.
160 --
161 -- Post Failure:
162 -- If an error has occurred, an error message and exception will be raised
163 -- but not handled.
164 --
165 -- Developer Implementation Notes:
166 -- Any post-processing required after the delete dml is issued should be
167 -- coded within this procedure. It is important to note that any 3rd party
168 -- maintenance should be reviewed before placing in this procedure.
169 --
170 -- Access Status:
171 -- Internal Row Handler Use Only.
172 --
173 -- {End Of Comments}
174 -- -----------------------------------------------------------------------------
175 Procedure post_delete(p_rec in hxc_map_shd.g_rec_type) is
176 --
177 l_proc varchar2(72);
178 --
179 Begin
180
181
182 if g_debug then
183 l_proc := g_package||'post_delete';
184 hr_utility.set_location('Entering:'||l_proc, 5);
185 end if;
186 begin
187 --
188 hxc_map_rkd.after_delete
189 (p_mapping_id
190 => p_rec.mapping_id
191 ,p_name_o
192 => hxc_map_shd.g_old_rec.name
193 ,p_object_version_number_o
194 => hxc_map_shd.g_old_rec.object_version_number
195 );
196 --
197 exception
198 --
199 when hr_api.cannot_find_prog_unit then
200 --
201 hr_api.cannot_find_prog_unit_error
202 (p_module_name => 'HXC_MAPPINGS'
203 ,p_hook_type => 'AD');
204 --
205 end;
206 --
207 if g_debug then
208 hr_utility.set_location(' Leaving:'||l_proc, 10);
209 end if;
210 End post_delete;
211 --
212 -- ----------------------------------------------------------------------------
213 -- |---------------------------------< del >----------------------------------|
214 -- ----------------------------------------------------------------------------
215 Procedure del
216 (p_rec in hxc_map_shd.g_rec_type
217 ) is
218 --
219 l_proc varchar2(72);
220 --
221 Begin
222 g_debug := hr_utility.debug_enabled;
223
224 if g_debug then
225 l_proc := g_package||'del';
226 hr_utility.set_location('Entering:'||l_proc, 5);
227 end if;
228 --
229 -- We must lock the row which we need to delete.
230 --
231 hxc_map_shd.lck
232 (p_rec.mapping_id
233 ,p_rec.object_version_number
234 );
235 --
236 -- Call the supporting delete validate operation
237 --
238 hxc_map_bus.delete_validate(p_rec);
239 --
240 -- Call the supporting pre-delete operation
241 --
242 hxc_map_del.pre_delete(p_rec);
243 --
244 -- Delete the row.
245 --
246 hxc_map_del.delete_dml(p_rec);
247 --
248 -- Call the supporting post-delete operation
249 --
250 hxc_map_del.post_delete(p_rec);
251 --
252 End del;
253 --
254 -- ----------------------------------------------------------------------------
255 -- |---------------------------------< del >----------------------------------|
256 -- ----------------------------------------------------------------------------
257 Procedure del
258 (p_mapping_id in number
259 ,p_object_version_number in number
260 ) is
261 --
262 l_rec hxc_map_shd.g_rec_type;
263 l_proc varchar2(72);
264 --
265 Begin
266 g_debug := hr_utility.debug_enabled;
267
268 if g_debug then
269 l_proc := g_package||'del';
270 hr_utility.set_location('Entering:'||l_proc, 5);
271 end if;
272 --
273 -- As the delete procedure accepts a plsql record structure we do need to
274 -- convert the arguments into the record structure.
275 -- We don't need to call the supplied conversion argument routine as we
276 -- only need a few attributes.
277 --
278 l_rec.mapping_id := p_mapping_id;
279 l_rec.object_version_number := p_object_version_number;
280 --
281 -- Having converted the arguments into the hxc_map_rec
282 -- plsql record structure we must call the corresponding entity
283 -- business process
284 --
285 hxc_map_del.del(l_rec);
286 --
287 if g_debug then
288 hr_utility.set_location(' Leaving:'||l_proc, 10);
289 end if;
290 End del;
291 --
292 end hxc_map_del;
[Home] [Help]