1 Package Body ota_lpt_del as
2 /* $Header: otlptrhi.pkb 120.0 2005/05/29 07:24:49 appldev noship $ */
3 --
4 -- ----------------------------------------------------------------------------
5 -- | Private Global Definitions |
6 -- ----------------------------------------------------------------------------
7 --
8 g_package varchar2(33) := ' ota_lpt_del.'; -- Global package name
9 --
10 -- ----------------------------------------------------------------------------
11 -- |------------------------------< delete_dml >------------------------------|
12 -- ----------------------------------------------------------------------------
13 -- {Start Of Comments}
14 --
15 -- Description:
16 -- This procedure controls the actual dml delete logic. The functions of
17 -- this procedure are as follows:
18 -- 1) To set and unset the g_api_dml status as required (as we are about to
19 -- perform dml).
20 -- 2) To delete the specified row from the schema using the primary key in
21 -- the predicates.
22 -- 3) To trap any constraint violations that may have occurred.
23 -- 4) To raise any other errors.
24 --
25 -- Prerequisites:
26 -- This is an internal private procedure which must be called from the del
27 -- procedure.
28 --
29 -- In Parameters:
30 -- A Pl/Sql record structre.
31 --
32 -- Post Success:
33 -- The specified row will be delete from the schema.
34 --
35 -- Post Failure:
36 -- On the delete dml failure it is important to note that we always reset the
37 -- g_api_dml status to false.
38 -- If a child integrity constraint violation is raised the
39 -- constraint_error procedure will be called.
40 -- If any other error is reported, the error will be raised after the
41 -- g_api_dml status is reset.
42 --
43 -- Developer Implementation Notes:
44 -- None.
45 --
46 -- Access Status:
47 -- Internal Row Handler Use Only.
48 --
49 -- {End Of Comments}
50 -- ----------------------------------------------------------------------------
51 Procedure delete_dml
52 (p_rec in ota_lpt_shd.g_rec_type
53 ) is
54 --
55 l_proc varchar2(72) := g_package||'delete_dml';
56 --
57 Begin
58 hr_utility.set_location('Entering:'||l_proc, 5);
59 --
60 --
61 --
62 -- Delete the ota_learning_paths_tl row.
63 --
64 delete from ota_learning_paths_tl
65 where learning_path_id = p_rec.learning_path_id
66 and language = p_rec.language;
67 --
68 --
69 --
70 hr_utility.set_location(' Leaving:'||l_proc, 10);
71 --
72 Exception
73 When hr_api.child_integrity_violated then
74 -- Child integrity has been violated
75 --
76 ota_lpt_shd.constraint_error
77 (p_constraint_name => hr_api.strip_constraint_name(SQLERRM));
78 When Others Then
79 --
80 Raise;
81 End delete_dml;
82 --
83 -- ----------------------------------------------------------------------------
84 -- |------------------------------< pre_delete >------------------------------|
85 -- ----------------------------------------------------------------------------
86 -- {Start Of Comments}
87 --
88 -- Description:
89 -- This private procedure contains any processing which is required before
90 -- the delete dml.
91 --
92 -- Prerequisites:
93 -- This is an internal procedure which is called from the del procedure.
94 --
95 -- In Parameters:
96 -- A Pl/Sql record structre.
97 --
98 -- Post Success:
99 -- Processing continues.
100 --
101 -- Post Failure:
102 -- If an error has occurred, an error message and exception will be raised
103 -- but not handled.
104 --
105 -- Developer Implementation Notes:
106 -- Any pre-processing required before the delete dml is issued should be
107 -- coded within this procedure. It is important to note that any 3rd party
108 -- maintenance should be reviewed before placing in this procedure.
109 --
110 -- Access Status:
111 -- Internal Row Handler Use Only.
112 --
113 -- {End Of Comments}
114 -- ----------------------------------------------------------------------------
115 Procedure pre_delete(p_rec in ota_lpt_shd.g_rec_type) is
116 --
117 l_proc varchar2(72) := g_package||'pre_delete';
118 --
119 Begin
120 hr_utility.set_location('Entering:'||l_proc, 5);
121 --
122 hr_utility.set_location(' Leaving:'||l_proc, 10);
123 End pre_delete;
124 --
125 -- ----------------------------------------------------------------------------
126 -- |-----------------------------< post_delete >------------------------------|
127 -- ----------------------------------------------------------------------------
128 -- {Start Of Comments}
129 --
130 -- Description:
131 -- This private procedure contains any processing which is required after
132 -- the delete dml.
133 --
134 -- Prerequistes:
135 -- This is an internal procedure which is called from the del procedure.
136 --
137 -- In Parameters:
138 -- A Pl/Sql record structure.
139 --
140 -- Post Success:
141 -- Processing continues.
142 --
143 -- Post Failure:
144 -- If an error has occurred, an error message and exception will be raised
145 -- but not handled.
146 --
147 -- Developer Implementation Notes:
148 -- Any post-processing required after the delete dml is issued should be
149 -- coded within this procedure. It is important to note that any 3rd party
150 -- maintenance should be reviewed before placing in this procedure.
151 --
152 -- Access Status:
153 -- Internal Row Handler Use Only.
154 --
155 -- {End Of Comments}
156 -- -----------------------------------------------------------------------------
157 Procedure post_delete(p_rec in ota_lpt_shd.g_rec_type) is
158 --
159 l_proc varchar2(72) := g_package||'post_delete';
160 --
161 Begin
162 hr_utility.set_location('Entering:'||l_proc, 5);
163 begin
164 --
165 ota_lpt_rkd.after_delete
166 (p_learning_path_id
167 => p_rec.learning_path_id
168 ,p_language
169 => p_rec.language
170 ,p_name_o
171 => ota_lpt_shd.g_old_rec.name
172 ,p_description_o
173 => ota_lpt_shd.g_old_rec.description
174 ,p_objectives_o
175 => ota_lpt_shd.g_old_rec.objectives
176 ,p_purpose_o
177 => ota_lpt_shd.g_old_rec.purpose
178 ,p_keywords_o
179 => ota_lpt_shd.g_old_rec.keywords
180 ,p_source_lang_o
181 => ota_lpt_shd.g_old_rec.source_lang
182 );
183 --
184 exception
185 --
186 when hr_api.cannot_find_prog_unit then
187 --
188 hr_api.cannot_find_prog_unit_error
189 (p_module_name => 'OTA_LEARNING_PATHS_TL'
190 ,p_hook_type => 'AD');
191 --
192 end;
193 --
194 hr_utility.set_location(' Leaving:'||l_proc, 10);
195 End post_delete;
196 --
197 -- ----------------------------------------------------------------------------
198 -- |---------------------------------< del >----------------------------------|
199 -- ----------------------------------------------------------------------------
200 Procedure del
201 (p_rec in ota_lpt_shd.g_rec_type
202 ) is
203 --
204 l_proc varchar2(72) := g_package||'del';
205 --
206 Begin
207 hr_utility.set_location('Entering:'||l_proc, 5);
208 --
209 -- We must lock the row which we need to delete.
210 --
211 ota_lpt_shd.lck
212 (p_rec.learning_path_id
213 ,p_rec.language
214 );
215 --
216 -- Call the supporting delete validate operation
217 --
218 ota_lpt_bus.delete_validate(p_rec);
219 --
220 -- Call to raise any errors on multi-message list
221 hr_multi_message.end_validation_set;
222 --
223 -- Call the supporting pre-delete operation
224 --
225 ota_lpt_del.pre_delete(p_rec);
226 --
227 -- Delete the row.
228 --
229 ota_lpt_del.delete_dml(p_rec);
230 --
231 -- Call the supporting post-delete operation
232 --
233 ota_lpt_del.post_delete(p_rec);
234 --
235 -- Call to raise any errors on multi-message list
236 hr_multi_message.end_validation_set;
237 --
238 End del;
239 --
240 -- ----------------------------------------------------------------------------
241 -- |---------------------------------< del >----------------------------------|
242 -- ----------------------------------------------------------------------------
243 Procedure del
244 (p_learning_path_id in number
245 ,p_language in varchar2
246 ) is
247 --
248 l_rec ota_lpt_shd.g_rec_type;
249 l_proc varchar2(72) := g_package||'del';
250 --
251 Begin
252 hr_utility.set_location('Entering:'||l_proc, 5);
253 --
254 -- As the delete procedure accepts a plsql record structure we do need to
255 -- convert the arguments into the record structure.
256 -- We don't need to call the supplied conversion argument routine as we
257 -- only need a few attributes.
258 --
259 l_rec.learning_path_id := p_learning_path_id;
260 l_rec.language := p_language;
261 --
262 --
263 -- Having converted the arguments into the ota_lpt_rec
264 -- plsql record structure we must call the corresponding entity
265 -- business process
266 --
267 ota_lpt_del.del(l_rec);
268 --
269 hr_utility.set_location(' Leaving:'||l_proc, 10);
270 End del;
271 --
272 -- ----------------------------------------------------------------------------
273 -- |------------------------------< del_tl >----------------------------------|
274 -- ----------------------------------------------------------------------------
275 Procedure del_tl
276 (p_learning_path_id in number
277 ,p_associated_column1 in varchar2 default null
278 ) is
279 --
280 -- Cursor to obtain all the translation rows.
281 --
282 cursor csr_del_langs is
283 select lpt.language
284 from ota_learning_paths_tl lpt
285 where lpt.learning_path_id = p_learning_path_id;
286 --
287 l_proc varchar2(72) := g_package||'del_tl';
288 --
289 Begin
290 hr_utility.set_location('Entering:'||l_proc,10);
291 --
292 -- Delete all the translated rows
293 --
294 for l_lang in csr_del_langs loop
295 ota_lpt_del.del
296 (p_learning_path_id => p_learning_path_id
297 ,p_language => l_lang.language
298 );
299 end loop;
300 --
301 hr_utility.set_location(' Leaving:'||l_proc,20);
302 End del_tl;
303 --
304 end ota_lpt_del;
[Home] [Help]